passive fire protection – fire and smoke … fire protection... · queensland building and...
TRANSCRIPT
Queensland Building and Construction Commission Regulation 2003Schedule 2 – Part 23
Effective From 1/01/09Scope AmendmentTechnical Amendment 31/03/10
1/4/16Managerial Amendment 29/05/09
PASSIVE FIRE PROTECTION –FIRE AND SMOKE WALLS AND CEILINGS
Licence Class(1) Certify
Scope of workCertify, inspect and test fire walls, smoke walls or fire rated ceiling systems requiring afire resistant level under the Building Code of Australia.
Technical qualificationsThe technical qualifications stated in the technical qualifications document for thelicence applied for.
Managerial qualificationsAn approved managerial qualification.
Experience requirementsTwo years experience, which includes experience gained during an apprenticeship orother training, in—
(a) the scope of work for the class; or(b) other work, if the commission considers experience in the other work is at
least equivalent to experience in the scope of work for the class.
Financial requirementsThe relevant financial requirements in the board’s policies.
Queensland Building and Construction Commission Regulation 2003Schedule 2 – Part 23
Effective From 1/01/09Scope AmendmentTechnical Amendment 31/03/10Managerial Amendment 29/05/09
Excerpt from the Department of Housing and Public Works Technical QualificationDocument for this licence class
Passive fire protection—fire and smoke walls and ceilings licence
The successful completion of—(a) Certificate III in Wall and Ceiling Lining CPC31211 and one of the following—
(i) Quality assure fire-rated lining systems CPCCBC4047A;(ii) Prepare a fire protection certification statement or report REP 1; or
(b) successful completion of a course the commission considers is at least equivalent to acourse mentioned in paragraph (a).