parts manual · i' 7.5c711zo parts manual no. 2726 models 75a,b and r tractor shovel...

I'

7.5C711ZO

PARTS MANUAL

No. 2726 Models

75A,B and R Tractor Shovel

Information contained herein pertains to Machine Serial Numbers listed below:

'. G.M., 8123D-12183D, 1CB893 & after : WAUKESHA - 8123-12183, 1CA3170 & after

Record Your Machine

Serial Number Here

CLARK EQUIPMENT COMPANY

Pn'i1tect 1;, U.S.A.

BUCKET CARRIER

51:iR

FRONT DRIVE BOOM GUIDE BAR AXLE CYLINDER

MODEL 75A

--------

AIR CLEANER C p

HOOD SIDE PANEL

TS-2770-P

-- -,----------~-~--~-,,

~ mmm CONSTRUCTION MACHINERY DIVISION m WHEN ORDERING REPAIR PARTS

To assure the best results and to maintain the original quality built into the machine it is important that genuine "Clark" Parts be used when new parts are required.

IMPORTANT: Always furnish the distributor with the machine serial number when ordering parts.

Order through your nearest Clark Distributor, for THE MICHIGAN LINE.

Always give serial number of machine.

Furnish: Quantity, Part Number and Description.

WHEN PARTS ARE RECEIVED

Check immediately for quantity, correctness and condition.

Advise your Michigan Distributor of any error.

Claims for damages, during shipment, should be made t~ the carrier, immediately.

INDEX MODELS 75A, 75B, 75R

A Page C Page

Accelerator Pedal and Linkage - DIESEL ............ 23 Cables, Battery ............................... 163 Accelerator Pedal and Linkage - GAS ............... 24 Cables, Ignition ................................ . 2 Adapter, Steering Booster - 758 and 75R .......... 119 Cap, Air Cleaner ............................ 21, 23

Air Cleaner and Connections - DIESEL ............. 21 Cap,FuelTank ................................ 17

Air Cleaner and Connections - GAS ................ 23 Cap, Reservoir Breather ............ : ............ 136

Air Cleaner Cap ............................. 21, 23 Carburetor ........... : ........................ . 2

Attachment Carrier and Clamp Carrier-Tractor Logger 171 Carrier, Bucket ................................ 10

Axle Assembly - Front Drive - 75A and 758 ........ 79 Carrier, Clamp - Tractor Logger .................. 171

Axle Assembly - Front Steering - 75R ............. 80 Cartridge Kit, Fuel Filter ...................... 30, 33

Axle Assembly - Rear Drive - 75R ................. 79 Cartridge Kit, Torque Converter Oil Filter ...... 71, 73, 75

Axle Assembly - Rear Drive Steer - 75A ......... 83, 85 Clamp Arm - Tractor Logger .................... 171

Axle Assembly - Rear Steering - 758 ........... 86, 87 Clamp Carrier -Tractor Logger .................. 171

Axle Mounting Parts - 75A ........................ 6 Clamp Cylinder -Tractor Logger ................. 176

Axle Mounting Parts - 758 ........... : ............ 8 Coil, Ignition ................................... 2

Axle Mounting Parts - 75R ........................ 9 Control Cover, Transmission ................... 53, 55 Control Valve -- Standard Machine ............ 151, 153

B Control Valve - Tractor Logger .................. 175

Back-Up Lamp ................................ 163 Converter Assembly ....................... 57, 61, 65 ·

Battery and Battery Box ........................ 158 Converter Charging Pump ............... 59, 67, 68, 69

Battery Cables ................................ 163 Counterweight ................................. 17

Body Panels ................................... 17 Cradle, Drive Steer Axle - 75A ................... 6, 7

Boom and Guide Bar ............................ 12 Cutting Edges, Bucket ........................... 10

Boom Cylinder ............................... 154 Cylinder Boom ............................... 154

Boom Pipes - Standard Machine ................... 12 Cylinder, Bucket .............................. 155

Boom Pipes - Tractor Logger .................... 173 Cylinder, Clamp ............................... 176

Brake Assembly - Front ......................... 98 Brake Assembly - Rear .......................... 99 D Brake Controls and Floorboards ................... 97 Decals ........................................ 5

Brake Lines ................................ 93, 94 Diagram, Wiring ........................... 161, 162

Brake Master Cylinder ....................•...... 97 Differential and Carrier Assembly .................. 89

Brake Wheel Cylinder ........................ 98,99 Distributor and Ignition Cables: ..................... 2

Bucket and Boom Hydraulic Pump .... 137, 138, 139, 140 Drag Link, Steering ............................ 121

Bucket and Boom Hydraulic System ... 143, 145, 147, 149 Bucket and Carrier .............................. 10 E

Bucket Cutting Edges ........................... 10 Engine Accessories - GAS ....................... 2, 3 Bucket Cylinder ............................... 155 Engine Accessories - DIESEL ..................... .4 Bucket Indicator ............................... 11 Engine Hourmeter ............................... 1 Bucket Teeth Chart ............................. 11 Engine Oil Pressure Sender Unit .................... 1

PM 2726 [A)

I

r;rrmrn mmm CONSTRUCTION MACHINERY DIVISION -Page

Engine Support Parts ............................. 1 Engine Temperature Sender Unit .................... 1 Ether Start Panel .............................. 168

F Filter, Fuel - DIESEL ........................ 30, 33 Filter, Torque Converter Oil ................ 71, 73, 75 Floorboards ................................... 97 Fork, Tractor Logger ........................... 171 Frame Assembly - 75A ......................... 6, 7 Frame Assembly - 758 ........................... 8 Frame Assembly - 75R ........................... 9 Front Brake Assembly ........................... 98 Front Drive Axle Assembly - 75A and 758 .......... 79 Front Steer Axle ............................... 80 Fuel Filters - DIESEL .................... 29, 30, 33 Fuel Lines - DIESEL ..................... 29, 30, 33 Fuel Lines - GAS .............................. 28 Fuel Pump ................................... 2, 3 Fuel Tank .................................... 31 Fuel Tank Cap ................................. 17

G Gauges, Instrument Panel ................... 159, 160 Gear Shift Levers and Linkage - Transmission ........ 51 Generator ................................... 1, 2 Glow Plugs .................................... . 3 Grille, Counterweight, Hood and Shrouds ............ 17 Guide Bar .................................... 12

H

Head Lamp Assembly .......................... 163 Hood ........................................ 17 Hood Side Panels ............................... 17 Horn ....................................... 164 Hourmeter, Engine ............................. . 1 Hydraulic Oil Reservoir ......................... 136 Hydraulic Pump - Bucket and Boom .. 137, 138, 139, 140 Hydraulic Pump - Converter Charging ..... 59, 67, 68, 69 Hydraulic Pump - Steering .. 130, 131, 132, 133, 134, 135 Hydraulic System - Boom, Carrier and Clamp

Tractor Logge.- .............................. 173 Hydraulic System - Bucket and Boom .143, 145, 147, 149 Hydraulic System - Steering- 75A ........ 122, 123,124 Hydraulic System - Steering- 758 ............ 125, 126 Hydraulic System - Steering - 75R ............ 127, 128 Hydraulic System - Transmission and Torque

Converter ............................. 71, 73, 75

Ignition Cables .................................. 2 Ignition Coil ................................... 3 Ignition Switch ........................... 159, 160 Instrument Panel - DIESEL ..................... 160 Instrument Panel - GAS ........................ 159

·- (BJ

L Page

Light Mounting Plate ............................ 17 Lights ...................................... 163 Light Switch ............................. 159, 160 Lever, Parking Brake Hand ...................... 101

M Main Hydraulic Pump .............. 137, 138, 139, 140 Master Cylinder, Brake .......................... 97 Mechanical Starter Pedal and Linkage .............. 167 Muffler - DIESEL .............................. 19 Muffler - GAS ................................ 18

0 Oil Reservoir, Hydraulic ........................ 136

p

Panel, Instrument - DIESEL ..................... 160 Panel, Instrument - GAS ....................... 159 Parking Brake Controls .......................... 97 Pipe, Boom - Standard Machine ................... 12 Pipe, Boom - Tractor Logger .................... 173 Planet Spider Assembly .......................... 81 Plate, Light Mounting ........................... 17 Pressure Regulator Valve Assembly .............. 62, 66 Propeller Shaft ........................... 90, 91, 92 Pump, Bucket and Boom ............ 137, 138, 139, 140 Pump, Converter Charging ............... 59, 67, 68, 69 Pump, Steering ........... 130, 131,132,133,134,135 Push Rod Assembly - 75A ...................... 117 Push Rod End Assembly - 75A .................. 118

R Radiator and Connections ..................... 13, 14 Rear Brake Assembly ............................ 99 Rear Drive Axle - 75R .......................... 79 Rear Drive Steer Axle - 75A ................... 83, 85 Rear Drive Steer Axle Cradle - 75A ................. 6 Rear Steering Axle · 758 ...................... 86, 87 Reservoir Breather Cap ......................... 136 Reservoir, Hydraulic Oil ........................ 136

s Seat and Support ........................... 166 Sender Unit, Engine Oil Pressure .................... 1 Sender Unit, Engine Temperature ................... 1 Sender Unit, Torque Converter Temperature .... 71, 73, 75 Sheet Metal ................................... 17 Starter - DIESEL ............................... 3 Starter - GAS .................................. 3 Starter Pedal and Linkage ....................... 167 Starter Push Button ........................ 159, 160 -Steering Booster Adapter - 758 and 75R ........... 119 . Steering Booster Assembly .............. 109, 111, 113 Steering Drag Link ............................. 121 Steering Gear Assembly ......................... 107 Steering Hydraulic System - 75A ......... 122, 123,124

PM 2726

~ mmtma CONSTRUCTION MACHINERY DIVISION -Page Page

Steering Hydraulic System - 758 ............. 125, 126 Tractor Logger Fork ........................... 171 Steering Hydraulic System - 75R ............. 127, 128 Tractor Logger Hydraulic System - Boom Carrier Steering Linkage Group - 75A ................... 103 and Clamp ................................. 173 Steering Linkage Group - 758 ................... 104 Transmission and Torque Converter Hydraulic Steering Linkage Group - 75R ................... 105 System ................................ 71, 73, 75 Steering Pump ............ 130, 131, 132, 133, 134, 135 Transmission Assembly .......................... 36 Steering Push Rod - 75A ....................... 117 Transmission Control Cover ....................... 53 Steering Spider - 758 ........................ 86, 87 Transmission Controls - 75A .................... .49 Steering Wheel ................................ 107 Transmission Controls - 758 and 75R .............. 50 Switch, Ignition ........................... 159, 160 Switch, Light ............................. 159, 160

Transmission Mounts - 75A ..................... 6, 7 I Transmission Mounts - 758 ....................... 8 Transmission Mounts - 75R ....................... 9

T Tail Lamp Assembly ........................... 163 Tank, Fuel .................................... 31 V Teeth, Bucket ................................. 11 Tie Rod and Push Rod End Assembly - 75A and 758 .118 Valve Assembly, Pressure Relief ... : ............ 62, 66

Tie Rod Assembly - 75A ....................... 102 Valve Control Levers and Linkage - Standard

Tie Rod Assembly - 758 ..................... 86, 87 Machine ................................... 156

Tie Rod Assembly - 75R ........................ 80 Valve Control Levers and Linkage - Tractor Logger ... 157

Tie Rod End Assembly - 75R .................... 120 Valve, Control - Standard Machine ................ 151

Tools ....................................... 163 Voltage Regulator ............................... 2

Torque Converter Assembly ................ 57, 61, 65 Torque Converter Charging Pump ......... 59, 67, 68, 69 w Torque Converter Hydraulic System .......... 71, 73, 75 Wheel Assembly Data - Tubeless ................. 164 Torque Converter Temperature Sender Unit .... 71, 73, 75 Wheel Assembly Data - With Tube ............ 164, 165 Tractor Logger Attachment Carrier and Wheel - 758 and 75R .......................... 165

Clamp Carrier .............................. 171 Wheel Cylinder, Brake ........................ 98, 99 Tractor Logger Clamp Arm ...................... 171 Wheel, Steering ............................... 107 Tractor Logger Clamp Cylinder ................... 176 Wiring and Battery Cables ....................... 163 Tractor Logger Control Valve .................... 175 Wiring Diagram ........................... 161, 162

NOTES

PM 2726 [Cl

m-rrM ~

CONSTRUCTION MACHINERY DIVISION

ENGINE AND ACCESSORIES-WAUKESHA

All orders for engine assembly or components thereof should be placed with the nearest Waukesha Motor Co. distributor or dealer. Always give model, specifications and serial number of your engine. This data will be found on

nameplate attached to the side of the engine.

No. Item No.

Part No. Description Req'd.

ENGINE SUPPORT PARTS-GAS AND DIESEL

550697 SUPPORT, Engine - L."H. -------------------

2 551777 SUPPORT, Engine - R.H. --------------------

3 1 C-824 BOLT, Support to Flywheel Housing ___ 8

4 4E-08 Li<WSHR, Support to Flywheel Hsg. __ 8

5 550698 PAD, Support to Frame ______________________ 2

6 2C-832 BOLT, Support to Frame _ 4

7 210-08 NUT, Support to Frame 4

8 2C-832 BOLT, Engine Trunnion to Frame 2

9 21 D-08 NUT, Engine Trunnion to Frame 2

10 619029 WASHER, Engine Trunnion to Frame 2

ENGINE ACCESSORIES - GAS AND DIESEL

11 551323 SENDER UNIT, Engine Temperature __

12 550832 SENDER UN IT, Oil Pressure - See Note "A" ··-------······--------······-·· 1

HOURMETER AND MOUNTING PARTS

13 521484 *HOUR METER---------------------------------------- 1

13A 940323 **HOUR METER------------------------------------- 1

14 953130 GASKET, Hourmeter ___________________________ 1

15 41 G-1010 SCREW, Hourmeter Attaching_____________ 4

16 552839 WASHER, Hourmeter Attaching __________ 4

GENERATOR AND PARTS - GAS AND DIESEL

17 GENERATOR ASSY (Inc. 18 thru 22)

17A 961810 For Serial Group "A" Below ___________ _

No. Item No,


18 ARMATURE, Generator

18A 940135 For Serial Group "A" Below ____________

188 871535 For Serial Group "B" Below ________

19 BRUSH, Generator

19A 940136 For Serial Group "A" Below ____________

198 871541 For Serial Group "B" Below ______

20 619052 FAN, Generator - For Serial Group "A" Only ----------------------------------------

21 630506 BAFFLE, Generator - For Serial Group "B" Only_____ _________________ ______ 1

22 PULLEY, Generator

22A 940134 For Serial Group "A" Below ___________ _

228 940713 For Serial Group "B" Below _____________ _

23 6J-405 KEY, Pulley _________________________________ _

24 23E-11 WASHER, Pulley ___________________________ _

25 850311 NUT, Pulley __________________________________ _

26 957243 STRAP, Generator Adjusting __________ _

27 l C-512 SOLT, Adjusting Strap ________________ ____ _ 2

28 25E-15 WASHER, Adjusting Strap ______ ____ _ 2

29 4E-05 LKWSHR, Adjusting Strap _________________ 2

Serial Group "A": 75A GAS - 8123 thru 12183, 1 CA3170 and thereafter

75A DIESEL - 8123D thru 12183D, 1CB893 and thereafter

75B - 6123 thru 6220

75R - 7123 thru 7183

Serial Group "8": 178 664858 For Serial Group "B" Below ______________ 1 75B - 6221 thru 6270

*NOTE: For Serial: 75A GAS - 8123 thru 12183; 1CA3170 thru 1CA3418. 75A DIESEL - 8123D thru 12183D; 1CB893 thru 1CB968.

**NOTE: _For Serial: 75A GAS - 1CA3419 & After. 75A DIESEL - 1CB969 & After. NOTE "A": For replacement refer to Service Gram S.G. -3268.

WHEN ORDERING PARTS, ALWAYS STATE MODEL AND SERIAL NO. OF MACHINE

PM 2726 .\,,,

1.2

~ Dn!IttttD CONSTRUCTION MACHINERY DIVISION -ENGINE AND ACCESSORIES (Continued)

No. Item No.


30 652444 S"ACER, Generator - Rear

31 2C-524 BOLT, Gen. Attaching - 1 %'' long

32 2D-05 NUT, Generator Attaching

33 4E-05 LKWSHR, Generator Attaching .

34 1 C-516 BOLT, Generator Attaching - l" long

35

VOLTAGE REGULATOR - GAS AND DIESEL

REGULATOR, Voltage

35A 940105 For Serial Group "A" Below

358 941520 For Serial Group "B" Below

36 550862 BRACKET, Regulator Mounting

37 2C-620 BOLT, Bracket to Frame

38 2D-06

39 4E-06

NUT, Bracket to Frame

LKWSHR, Bracket to Frame

40 2C-412 BOLT, Regulator to Bracket

41 20-04

42 4E-04

NUT, Regulator to Bracket

LKWSHR, Regulator to Bracket

2

2

2

3

3

3

ENGINE ACCESSORIES-GAS MODEL ONLY DISTRIBUTOR AND IGNITION CABLES

43 940331 DISTRIBUTOR

44 953129 GASKET, Distributor

45 552842 CLAMP, Distributor

46 1 C-618 BOLT, Clamp

47 4E-06 LKWSHR, Clamp

48 857852 CAP, Distributor __

49 853628 POINT SET, Distributor __

50

51

52

53

850091

853586

853599

853598

ROTOR, Distributor __

COVER, Distributor (Inc. 52, 53) _

GASKET, Cover _

FELT SEAL, Cover __ __ _______ _ __ _

54 850085 CONDENSER, Distributor __ _

2

2

2

*NOTE: For replacement use 2503976 Coil plus 1-897894 Bracket.

Item No.

Part No.

No. Description Req'd.

55 552856 CABLE KIT, Ignition (Inc. 56 thru 62)

56 552844 CABLE - No. 1 & 6 Cylinder

57 552845 CABLE - No. 2 & 5 Cylinder

58 552846 CABLE - No. 3 Cylinder

59 552847 CABLE - No. 4 Cylinder _

60 652772 CABLE, Distributor to Coil

61 610097 NIPPLE, Distributor

62 610098 NIPPLE, Coil

IGNITION COIL

63 940104 *COi L, Ignition

2

2

7

64 2C-51 0 BOLT, Coil to Regulator Bracket 2

65 2D-05

66 4E-05

NUT, Coil to Regulator Bracket

LKWSHR, Coil to Regulator Bracket

CARBURETOR

67 990823 CARBURETOR

68 523347 GASKET, Carburetor to Manifold

69 940178 REPAIR KIT, Carburetor

70 940179 GASKET KIT, Carburetor

71 853227 JET, Adjustable

72 552825 STUD, Carburetor to Manifold _

73 20-05

74 4E-05

NUT, Carburetor to Manifold _

LKWSHR, Carburetor to Manifold

FUEL PUMP

75 941591 PUMP ASSY, Fuel (Inc. 76) __

76 952721 GASKET, Fuel Pump ---·

77 941945 REPAIR KIT, Fuel Pump ____ --· __

Serial Group" A": 75A GAS - 8123 thru 12183, 1CA3170 and thereafter 75A DIESEL - 8123D thru 12183D, 1CB893 and thereafter 758 - 6123 thru 6220 75R - 7123 thru 7183

Serial Group "B": 75 B - 6221 thru 6270

2

2

2

2

2


21 PM 2726

~ r:mr.ttm CONSTRUCTION MACHINERY DIVISION -ENGINE AND ACCESSORIES (Continued)

Item No.

78

Part No.


§REPAIR KIT, Diaphragm-See 77. -

79 lC-516 BOLT,PumP.Attaching. ____________ 2

80 952779 WASHER, Copper - Pump Attaching 2

ST ARTER - GAS ONLY

81 585314*STARTER ASSY (Inc. 83, 84,

85A, 86A) -------------------------------------------82 552884 SPACER, Starter (For 940137 Starter

0 n I y l----------------------------------------------------83 850813 ARMATURE, Starter (For D.R. #

1107842) --------------------------------------------83A 871513 ARMATURE, Starter (For D.R.#

1107851 ) ____________________________________________ _ 84 961893 DRIVE ASSY, Starter. __________________________ _

85 943413 HOUSING, Drive (For D.R.# 11 07842) ____________________________________________ _

85A 945383 HOUSING, Drive (For D.R.# 1107851 ) ____________________________________________ _

86 940139 BRUSH, Starter (For D.R.# 1107842 ).____________________________________________ 4

86A 871518 BRUSH, Starter (For D.R.# 1107851 __ 4 87 957361 STUD, Starter Mounting (For 940137

Starter) ----------------------------------------------- 3 88 20-06 NUT, Mounting (For 940137 Starter) __ 3 89 4E-06 LKWSHR, Starter Mounting ___________________ 3

90 1C-620 BOLT, Mounting (For 520901

Starter 1------------------------------------------------- 3 91 551530 SWITCH, Starter Magnetic-------------------- 1 92 2C-414 BOLT, Switch Attaching----------------------- 2 93 20-04 NUT, Switch Attaching------------------------- 2 94 4E-04 LKWSHR, Switch Attaching------------------ 2

ENGINE ACCESSORIES - DIESEL ONLY 95

96

97

98

99

100

991292

953103

553139

FUEL INJECTION PUMP - See Engine Parts Manual --------------------------------

INJECTOR, Fuel - See Engine Parts Manual ------------------------------------------

LUBE OIL FILTER - See Engine Parts Mariual --· __ __ _ ____________________ _

GLOW PLUGS

GLOW PLUG _ ____________________ ______ 6

GASKET, Glow Plug __ ______ ________________ 6

HARNESS, Glow Plug Wiring. __________ _

Item No.

Part No. Description

No. Req'd.

101 552941 BRACKET, Glow Plug Harness

102 2G- l 210 SCREW, Bracket Attaching

103 14D-12 NUT, Bracket Attaching

104 2E-04 LKWSHR, Bracket Attaching

105 551530 SWITCH, Glow Plug Magnetic _

l 06 2C-4 l 4 BOLT, Switch Attaching 2

2

2

l 07 2D-04 NUT, Switch Attaching __ _

108 4E-04 LKWSHR, Switch Attaching

STARTER - DIESEL ONLY

109 518713 109A 946390

110 864539 110A 946420

111 864559 111A 946421

112 112A 864548 1128 874587 112c 891272 113 113A 864525 1138 865015

114 941992 114A 3679957

115 552884 116 1C-628 117 4E-06

Serial Group "C":

STARTER ASSY (Inc. 110 thru 114) STARTER ASSY (Inc. 110A, 111A,

112C, 1138, 114A) (D.R. 1113639) 1

ARMATURE, Starter----------------------ARMATURE, Starter (For D.R. #

T 113639) ----------------------------------------HO US I NG, Starter Drive------------------HOUSI NG, Starter Drive (For D.R.

1113639) ----------------------------------------DR I VE ASSY, Starter For Serial Group "C" Below -------------- 1 For Serial Group "D" Below ------------- 1 For D.R. # 1113639 ------------------------- 1 BRUSH, Starter For Serial Group "C" Below------------- 4 For Serial Group "D" Below &

D.R. # 1113639 ----------------------------- 4 SWITCH, Starter Solenoid ---------------SWITCH, Starter Solenoid (For

D.R. # 1113639) ---------------------------- 1 SPACER, Starter Mounting--------------- 1 BOLT, Starter Mounting------------------- 3 LKWSHR, Starter Mounting------------- 3

75A - 8123D thru 10766D, 10769D, 10774D, 10777D, 10778D 75B - 6 l 23D thru 6223D 75R- 7123D thru 7170D

Serial Group "D": 75A - 10767D, 10768D, 10770D thru 10773D, 107750,

10776D, 10779D thru 12183D, 1CB893 and thereafter 75B - 6224D thru 6270D 75R - 7171 D thru 7l 83D

*NOTE: 940137 Starter (Delco No. 1107821) was used on Serial 8123 thru 9082. When it becomes necessary to replace 940137 Starter use 585314 Starter (Item 81 ), remove 552884 Spacer item 82.


PM 2726 3.3

~ ~

CONSTRUCTION MACHINERY DIVISION -Item No.

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

ENGINE AND ACCESSORIES - G.M. All orders for engine assembly or components thereof should be placed with the nearest G.M. Diesel Distributor. To obtain proper items, it is necessary to provide your engine model, serial number and necessary group type number for the equipment required. This data is stamped on the options and accessories plate on the rocker cover of engine.

Part No.

531060 1 C·824 4E·08 2C·832 210·08 536613 25E·21 2C·832 210·08

532337 2C·616 20·06 4E·06 2C-420 20·04 4E·04 551255 551251 3G-608 15E·06 551323 636260 940643 18F-1 5K·108

ENGINE SUPPORTS

Description

SUPPORT, Engine (Rear) ···-····--·--·-· BOLT, Support to Flywheel ·-·---······ LKWSH R, Support to Flywheel ·---·-· BOLT, Support to Frame ···-······-·-··NUT, Support to Frame ····----·····-····SPACER, Front Engine Mounting .. WASHER, Front Engine Mounting .. BOLT, Front Engine Mounting ·-····· NUT, Front Engine Mounting·-··--·-·-··

ENGINE ACCESSORIES

*GENE RA TOR ····--···-·-···-·---·····-····-·· *STARTER ·-·-·····-······························ *VOLTAGE REGULATOR ·-············ *Fl L TER, Fuel & Engine Lube ........ .

BRACKET, Regulator Mounting .... .

BOLT, Bracket to Frame ·-····-····-····· NUT, Bracket to Frame ····-·-···-···-···· LKWSHR, Bracket to Frame ···-··-··-·· BOLT, Regulator to Bracket ........... . NUT, Regulator to Bracket ··-·-··-······ LKWSHR, Regulator to Bracket ...... .

HOURMETER ·-·······-·······-····-··-······· DAMPENER, Vibration··-··--···-·-------SCREW, Hourmeter Mounting···--··--·

LKWSHR, Hourmeter Mounting··-···· SENDING UNIT, Engine Temp. ·---··SWITCH, Oil Pressure ······-··-···········

**SENDING UNIT, Oil Pressure ·-·-·-··· TEE, Oil Pressure Switch-··-·······-······· NI PP LE, 0 i I Pressure Switch ·------·····

No. Req'd.

2 8 8 4 4 1 2 2 2

1 2 2 2 4 4 4 1 1 6 6

BATTERY, BATTERY BOX AND WIRING

Item No.

30

Part No.

31 550858 32 2C·612 33 2D·06 34 4E·06 35 550859 36 600183 37 25E·21 38 4E·05 39 10·05 40 550845 41 550846 42 593227 43 509335 44 509336

45 550851 46 535369 47 695120 48 550855

48A 557438

49 641738 50 551879


BATTERY (EXIDE No. XF·25) ....... 2

BOX, Battery ················-··---···········-· 1 BOLT, Battery Box to Frame .......... 4 NUT, Battery Box to Frame ········-··· 4 LKWSHR, Battery Box to Frame ..... 4 HOLD DOWN, Battery ··-········-········- 2 STUD, Battery Hold Down ····--······-· 4 WASHER, Battery Hold Down......... 4 LKWSHR, Battery Hold Down......... 4 NUT, Battery Hold Down ·····--········· 12 CABLE, Battery to Ground·········-···· 1 CABLE, Battery Connector ............. . CABLE, Battery to Solenoid ........... . WIRING HARNESS, Main······-·········· WIRING HARNESS, Generator to

Regulator ............. ·-············-············ 1 WIRE, Light Switch to Head Lamp... 1 WIRE, Fuel Gauge to Tank Unit....... 1 WIRE, Steering Column to Horn Relay 1 WIRE, Horn Relay to Horn

(See Note "A") ···········-·-···········-·-·· WIRE, Horn Relay to Horn

(See Note "A") -·-·············-·---···-······· WIRE, Oil Pressure Switch to Starter. WIRE, Regulator Ground to Bracket.

The following parts are to be used in place of parts specified in Parts Manual.

51 529842 HOOD ··············--··-·--·---··-·--················ 52 529852 RESERVOIR, Oil····················-·········· 53 530923 TANK, Fuel·····················-····--···········

*These parts are furnished with engine. See your local GM distributor for replacement or service on these parts. NOTE "A" - 550855 Wire is used with 647300 Horn. 557438 is used with 733624 Horn. New Horn (733624) includes a permanent

mounting bracket for identification purposes. **NOTE: For replacemem refer to Service Gram S.G. ·326B.

N O TES


4.3 PM 2726

Item No.

2

3

4

5

6

7

8

9

10

11

12

13

14

15


DECALS AND PLATES

75-A 75·8

DECAL, Michigan ......•......•...............................••.. 547852 547852

DECAL, Clark Equipment 547851 547851

DECAL, Model ..................................................... . 551798 551799

DECAL, Gear Shift .............................................. . 548474 551808

DECAL, Oil Level - Reservoir & Trans ............... . 548472 548472

DECAL, Drain - Transmission............................... 538256 538256

DECAL, Fill - Torque Convt. & Trans. ................ 548473 548473

DECAL, Torque Convt. - On Instrument Panel .... 548520 548520

DECAL. Cold Starting ........................................... 517224 517224

DECAL, Starter ...................................................... 538258 538258

DECAL, Switch Identification 548521 548521

DECAL, Safety Precaution .................................... 522549 522549

PLATE, Lubrication Instruction ............................. 1510525 1510525

SCREW, Lubrication Instruction Plate Attaching .. 6C-605 6C·605

PLATE, Patent ...................................................... 54207 4 542074

-75·R No. Req'd.

547852 2

547851 2

551800 2

551808

548472 2

538256

548473

548520

517224

538258

548521

522549

1510525

6C-605 4

542074

16 SCREW, Patent Plate Attaching ............................... 6C·605 6C-605 6C-605 4

PM 2726

NOTES


5.1

-----------------------------~~--

~ rnmm CONSTRUCTION MACHINERY DIVISION -

Ll" ~,-T

\ '~.1

,1\~1 24 23 22 21 20 19 18 17 16 15 14 13 TS-2683-P

FRAME, TRANSMISSION MOUNTS AND AXLE MOUNTS- MODEL 75A-WAUKESHA

Item No.

Part No.

l 550576 2 l OH-25 3 550010 4 24C-12112 5 68D-12 6 550572 7 2C-1044 8 l 8D-l0 9 2C-872

10 550070 11 4E-08 12 20-08 13 68D-08 14 l 8C-836 15 550010 16 lOH-25 17 24C-12128 18 538831 19 68D-12

Na. Description Req'd.

MOUNT, Transmission - L.H._____________ 1 FITTING, Pivot Tube Grease _____________ 2 BUSHING, Upper Pivot Tube ____________ 2 BOLT, Frant Axle ta Frame .......... ___ 8 NUT, Front Axle to Frame ----············· 8 MOUNT, Transmission - R.H. ········-··· 1 BOLT, Transmission to Mount ____________ 8 NUT, Transmission to Mount ___ . _______ 8 BOLT, Shaft Retaining _ _ __ . _____ ____ _ 2 SHAFT, Boom Cylinder Pivot . 1 LKWSHR, Shaft Retaining ... 2 NUT, Shaft Retaining _ .. _ .. _____ 2 NUT, Mount to Frame . 4 BOLT, Mount to Frame __ __ _ _______ _____ 4 BUSHING, Lower Pivot Tube _____________ 2 FITTING, Pivot Tube Grease .............. 2 BOLT, Rear Axle to Cradle ................ 8 PAD, Rear Axle Mount ...................... 2 NUT, Rear Axle to Cradle ···············-·· 8

Item Na.

Part No.

20 536645 21 550066 22 551348 23 551347

24 24A 550000

24B 514265

25 2C-856 26 550069 27 4E-08 28 20-08 29 15H-15

*NOTE: 68D-12 Nut (Item 5) must be used with 24C-12112 (7" long) Bolt. +As Required


CRADLE ASSY, Rear Axle (Inc. 21) l BUSHING, Cradle _ ________ ___ _ .. _____ 2

f WASHER, Cradle to Frame - Yi," _ fWASHER, Cradle to Frame - Va" _

FRAME ASSY (Inc. 3, 15) For Serie I 8123 thru 10222, 10240 &

10247 thru 10251 ___ ___ ____ _ ... For Serial: GAS - 10223 thru 10239,

10241 thru 10246, 10252 thru 12183, 1 CA3 l 70 & thereafter __ _

DIESEL - l0223D thru l 2183D, 1 CB893 & thereafter ____________ _

BOLT, Pin Retaining _________ ____ ____ ____ 2 PIN, Cradle Pivot __________________ . 2 LKWSHR, Pin Retaining __________ 2 NUT, Pin Retaining ___ _ _______ ___ 2 FITTING, Cradle Pin Grease ...... -······ 2


6 PM 2726

mrm!I mm:ml

17

16

13

Item Na.

1

2

3

12

Part Na.

900147

550010

18D-12


11 10 9 8 7 6 5 4

I

~~ 3

FRAME ASSEMBLY -G.M.

De1cr-iption

-2

TS-284-P

Na. Req'd.

4 14C-12112

FRAME ASSY (Inc. 2, 5) ----------------------------------------------------------------------------------------------- 1

BUSHING, Upper Pivot Tube ----------------------------------------------------------------------------------- 2

NUT, Front Axle to Frame ------------------------------------------------------------------------------------------- 8

BOLT, Front Axle to Frame --------------------------------------------------------------------------------------- 8

BUSHING, Lower Pivot Tube ------------------------------- ------------------------------------------------------ 2

BOLT, Pin Retaining ------------------------------------------------------------------------------------------------ 2 FITIING, Cradle Grease ------------------------------------------------------------------------------------------- 2

5

6

7

8

9

10

11

12

13

14

15

16

17

18

550010

2C-856

15H-15

550070

550069

4E-08

2D-08

550066

536645

18D-12

14C-12128

551348

551347

538831

SHAFT, Boom Cylinder to Frame ____________________ :_________________________________________________________ 1

PIN, Cradle Pivot ------------------------------------------------------------------------------------------------------- 2 LKWSHR, Pin Retaining Bolt --------------------------------------------------------------------------------------- 2

NUT, Pin Retaining Bolt ---------------------------------------------------------------------------------------------- 2

BUSHING, Cradle ------------------------------------------------------------------------------------------------------- 2

CRADLE ASSY (Inc. 12) -----------------------------------------------------------------------------------------------

NUT, Rear Axle to Frame ---------------------------------------------------------------------------------------- 8

BOLT, Rear Axle to Frame ------------------------------------------------------------------------------- 8

;WASHER, Cradle to Frame ---------------------------------------------------------------------------------------

;WASHER, Cradle to Frame ---------------------------------------------------------------------------------------

tPAD, Rear Axle to Frame ------------------------------------------------------------------------------------------- 2

:tAs Required tNot Illustrated

PM 2726


7

~ m:o:c:ttD CONSTRUCTION MACHINERY DIVISION -

Item No.

l

2

3

4

5

6

7

8

9

10

11

12

©------9

19 18 17 16 15 14 13 12 11 10

TS-2597-P

FRAME ASSEMBLY AND TRANSMISSION MOUNTS - MODEL 758-WAUKESHA Part No. No. Description Req'd.

550576 MOUNT, Transmission - L.H.

lOH-2 FITTING, Upper Pivot Tube Grease 2

550010 BUSHING, Upper Pivot Tube . 2

24C-12112 *BOLT, Axle to Frame 8

68D-12 NUT, Axle to Frame 8

550572 MOUNT, Transmission - R.H. l

2C-1044 BOLT, Transmission to Mount 8

68D-08 NUT, Mount to Frame _________ - -- ---··---- 4

l 8D-10 NUT, Transmission to Mount --··-· ----·-· 8

2C-872 BOLT, Shaft Retaining . --·---- -------·------ 2

550070 SHAFT, Boom Cylinder Pivot -----·--------

4E-08 LKWSHR, Shaft Retaining ----------------- 2

"NOTE: 68D-12 Nut (Item 5) must be used with 24C-12112 Bolt. tNot Illustrated

Item Part No. No. No. Description Req'd.

13 20-08 NUT, Shaft Retaining --------- 2

14 550010 BUSHING, Lower Pivot Tube . l

15 lOH-2 FITTING, Lower Pivot Tube Grease .. 2

16 4D-24 NUT, Axle Pivot Pin . ----· __ ·-· .------· ...

17 1 F-848 COTTER, Pivot Pin Nut ..... ____________ .

18 626561 PIN ASSY, Axle Pivot (Inc. 18A, 18B)

18A 626515 tPIN, Axle Pivot .

18B 626516 tBUSHING, Pivot Pin _ . ..

19 FRAME ASSY (Inc. 3, 14)

19A 550105 For Serial 6123 thru 6200 -· __

19B 517076 For Serial 6201 thru 6270 ----


8 PM 2726

~ ~

22

CONSTRUCTION MACHINERY DIVISION -2 3 4 5

~

.· /fa"

rt\\ 21 20 19 18 17 16 15 14 13 12 TS-2684-P

FRAME ASSEMBLY AND TRANSMISSION MOUNTS-MODEL 75R-WAUKESHA Item No.

Part No.

550576

2 lOH-2

3 550010

4 2C-672

5 550120

6 4E-06

7 2D-06

8 llH-15

9 550572

10 2C-1044

11 18D-10

12 2C-872

13 550070

Description

MOUNT, Transmission - L.H.

FITTING, Pivot Tube Grease _ _ __ _

BUSHING, Upper Pivot Tube _

No. Req'd.

2

2

BOLT, Pivot Pin Retaining _ _____ _ ______ 2

PIN, Axle Pivot _ ____ ______ __ ___ ______________ 2

LKWSHR, Pivot Pin Retaining _ __________ 2

NUT, Pivot Pin Retaining _ ___ ________ _____ 2

FITTING, Pivot Pin Grease . ____ 2

MOUNT, Transmission - R.H. ____ _

SOLT, Transmission to Mount .

NUT, Transmission to Mount __ _

BOLT, Shaft Retaining .

SHAFT, Boom Cylinder Pivot _

8

8

2

Item No.

Part No.

14 4E-08

15 20-08

16 68D-08

17 l SC-836

18 550010

19 lOH-2


LKWSHR, Shaft Retaining _ 2

NUT, Shaft Retaining ____ __ ______________ 2

NUT, Mount to Frame ------------------------ 4

SOLT, Mount to Frame _ ______ _______ ____ 4

BUSHING, Lower Pivot Tube ___________ . 2

FITTING, Pivot Tube Grease ______ _______ 2

20 24C-12112 *BOLT, Rear Axle to Frame·---------------- 8

21 68D-12

22

22A 550112

22B 517087

NUT, Rear Axle to Frame ------------------ 8

FRAME ASSY (Inc. 3, 18)

For Serial 7123 thru 7154 ________________ _

For Serial 7155 thru 7184 ------------------

*NOTE: 680-12 Nut (Item 21) must be used with 24C-12112 (7" long) Bolt.


PM 2726 9

~ ~


«' ;l

(1~ 6

20 19 18 17 16 15 14 13 12 11 10

TS-285-P

BUCKET AND CARRIER

Item Part No. Item Part No. No. No. Description R~'d. No. No. Description Req'd.

l 548152 CARRIER ASSY, Bucket (Inc. 15) _ 11 2C-656 BOLT, Pin Retaining -- 2 2 550208 PIN, Cylinder to Carrier _ 2 12 20-06 NUT, Pin Retaining 2 3 2C-672 BOLT, Pin Retaining -·--- -------· 2 13 4E-06 LKWSHR, Pin Retaining 2 4 4E-06 LKWSHR, Pin Retaining 2 14 11 H-15 FITTING, Carrier Grease 2 5 BUCKET ASSY - (See Chart Below) 15 550206 BUSHING, Carrier 4 6 552550 PIN, Carrier to Bucket . ---------------------- 2 16 550207 PIN, Guide Bar to Carrier 2 7 2C-648 BOLT, Pin Retaining ---------------------------- 2 17 20-06 NU:", Pin Retaining 2 8 4E-06 LKWSHR, Pin Retaining ____________________ 2 18 4E-06 LKWSHR, Pin Retaining 2 9 2D-06 NUT, Pin Retaining ________ 2 19 2C-648 BOLT, Pin Retaining _ 2

10 550231 PIN, Cylinder to Bucket -· 2 20 20-06 NUT, Pin Retaining _______ 2

BUCKET ASSEMBLY DATA

BUCKET MAIN CUTTING EDGE SIDE CUTTING EDGE I Width Part No. Part No. Size Approx. Wt. R. H. Part. No. L. H. Part No. Size Wt.

60" 552154 552865 l X 9 X 61 136 *552868 *552869 V2 X 3 X 37,y,. 14

73" 550210 552598 l X 9 X 73 164 *550218 *550216 V2 X 3 X 35·_116 13

79" 509491 553441 1 X 9 X 79 177 *550218 *550216 V2 X 3 X 35:1. 13

85" 551711 534113 1 X 9 X 85 190 *551815 *551816 ~2 X 3 X 38¥16 14

97" 519495 551765 1 X 9 X 97 218 *551769 *551770 V2x3x44 16

*NOTE: %" x 3" x 10" segments are available for above side cutting edges, 940173 R.H. and 940172 L.H. - approximate wt., 4 lbs.


10 PM 2726

~ mm:tttl CONSTRUCTION MACHINERY DIVISION -BUCKET INDICATOR

Item Part

2 3 4 6 No. No.

7 Description

\J, I 20-08

2 4E-08

3 616796

4 550646

5 526767

NUT, Pointer Arm to Bucket ..

LKWSHR, Pointer Arm to Bucket

WASHER, Pointer Arm to Bucket

SLEEVE, Pointer Arm . .

BUSHING, Pointer Arm ..

22 21

Bucket Width

60"

73"

79"

85"

97"

PM 2726

0

20 19 18

One Piece Taoth No.

552154

552154

552154

552154

552154

17 16 15

TS-2723-P

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

551521

2C-840

1 F-414

2J-8300

8D-08

552409

4F-08127

551517

526767

2C-844

616796

550646

l 2H- l 5

1 C-1072

551523

4E-10

1 D-10

4E-08

2D-08

1 F-414

551644

12H-15

4F-08127

BUCKET TEETH CHART

Replaceable Tip Tooth No. No. Required

529968 6

529968 7

529968 8

529968 8

529968 9

ARM, Pointer

BOLT, Pointer Arm to Bucket .

COTTER, Clevis Pin

CLEVIS, Rod to Pointer Arm.

NUT, Clevis Jam ...... .

ROD, Bucket Indicator .

PIN, Rod to Cam .... .

CAM, Indicator ... .

BUSHING, Cam ..

BOLT, Cam to Bucket .

WASHER, Cam to Bucket.

SLEEVE, Cam

FITTING, Cam Grease ..

BOLT, Tube to Carrier

TUBE, Indicator ..... .

LKWSHR, Tube to Carrier

NUT, Tube to Carrier .....

LKWSHR, Cam to Bucket .

NUT, Cam to Bucket .

COTTER, Clevis Pin

SPRING, Pointer Return

FITTING, Pointer Grease ...... .

PIN, Clevis to Pointer .

Replaceable Replaceable Tip No. Tip Pin No:

529970 529971

529970 529971

529970 529971

529970 529971

529970 529971


11

No. Req'd.

1

1

mm IIl!IC:ml

Item No.

1

20 19

Part No.

lA 550130 lB 512948

2 lOH-35 3 550178 4 2C-876 5 4E-06 6 20-06 7 550144 7A 550176 8 550143 9 20-06

10 4E-06 11 550207 12 2C-648 13 lOH-25

CONSTRUCTION MACHINERY DIVISION -

18 17 16 15

BOOM AND GUIDE BAR No.

Description Req'd.

BOOM ASSY For Standard Machines (Inc. 7, 7 A) _ For Tractor Logger Machines _________ _

FITTING, Boom Cylinder Pin Grease__ 2 SHAFT, Boom Pivot ______________ _____ _____ 1 BOLT, Pivot Shaft Retaining _____ _ ____ _ 2 LKWSHR, Pivot Shaft Retaining ___ ____ 2 NUT, Pivot Shaft Retaining __ __ _ _ _ 2 PIPE, Boom - R.H. _ _ _ _______ --··· __ __ 1 PIPE, Boom - L.H. _______ ___ 1 BUSHING, Boom to Carrier _ 2 NUT, Pin Retaining __________ ___ ___ ___ _____ 2 LKWSHR, Pin Retaining _____________ ________ 2 PIN, Boom to Carrier -·---------------------- 2 BOLT, Pin Retaining __ ----------------------- 2 FITTING, Boom Grease _ ------------------ 2

Item No.

Part No.

14 550143 15 llH-25 16 512991 17 2C-876 18 550188 19 4E-08 20 2D-08

21 21A lOH-35 21B llH-15

22 550191 23 2C-648 24 550179 25 4E-06 26 20-06

14

TS-2725-P


BUSHING, Guide Bar to Carrier 2 FITTING, Guide Bar Grease _ 2 GUIDE BAR ASSY (Inc. 12, 20) _ 2 BOLT, Pin Retaining ___ __ 2 PIN, Guide Bar to Frame . 2 LKWSHR, Pin Retaining 2 NUT, Pin Retaining 2

FITTING, Guide Bar Grease - Rear For bosses with V.." - 28 thread _ 2 For bosses with Vs" pipe thread 2

BUSHING, Guide Bar to Frame _ 2 BOLT, Pin Retaining ----------------· __ _ 2 PIN, Boom Cylinder to Boom _ . 2 LKWSHR, Pin Retaining __ _ _______ . 2 NUT, Pin Retaining ___ ______________ 2


12 PM 2726

~ ln!Ial

2


3 4 5 7

\i C

16 15 14 13 12

RADIATOR AND CONNECTIONS-WAUKESHA No.

m 8

r-----11

TS-2605-P

No. Item No.


Item No.


2C-620

2

2A 550589

2B 514658

3 4E-06

4

5

6

2D-06

351495

550588

BOLT, Clip to Rodiator .

CLIP, Radiator to Grille

2

For Serial Group "A" Below ............. 2

For Serial Group "B" Below ...... 2

LKWSHR, Clip to Radiator ..... .

NUT, Clip to Radiator .. .

CAP, Radiator ................................... .

RADIATOR

2

2

Serial Group "A":

7 784663

8 550590

9 784663

10 784663

11 550591

12 784663

13 73F-2

14

15

16

2C-828

518233

21 D-08

CLAMP, Hose .......... .

HOSE, Upper Radiator .

CLAMP, Hose .. .

CLAMP, Hose ..... ............. .

HOSE, Lower Radiator .. .

CLAMP, Hose ............. ~ ............ .

DRAIN COCK, Radiator .. .

BOLT, Radiator to Frame .... .

PAD, Radiator to Frame .... .

NUT, Radiator to Frame .

Serial Group "B":

2

2

2

75A - 8123 thru 10222, 10240 and 10247 thru 10251

75B - 6123 thru 6200

75A GAS- 10223 thru 10239, 10241 thru 10246, 10252 thru 12183, 1 CA3 l 70 and thereafter

75R- 7123 thru 7154 75A DIESEL-102230 thru 12183D, 1CB893 and thereafter 75B - 6201 thru 6270

PM 2726

75R - 7155 thru 7183


13

~ lm!lrm1

ll•m No.

l

2

Part No.

2C-614 2 514658

3

15

13

3 900220 4 4E-06 5 20-06 6 784663 7 420564 8 784663 9 523698

10 784663 11 784663 12 73F-2 13 21D-08 14 518233 15 2C-828

CONSTRUCTION MACHINERY DIVISION -4

-------1

8

9

I f}- 10

I~

f 12 11

TS-2558-P

RADIATOR AND CONNECTIONS-G.M. No.

Description Req'd.

BOLT, Clip to Radiator ------------------------------------------------------------------------------------------------ 2 CLIP, Radiator to Grille ---------------------------------------------------------------------------------------------- 2 RADIATOR ------------------------------------------------------------------------------------------------------------------- 1 LKWSHR, Clip to Radiator ------------------------------------------------------------------------------------------ 2 NUT, Clip to Radiator ------------------------------------------------------------------------··------------------------- 2 CLAMP, Hose to Radiator -------------------------------------------------------------------------------------------- l HOSE, Radiator - Upper ----------------------------------------------------------------------- -------------------- 1 'CLAMP, Hose to Engine -------·-------------------------------------------------------------------------------------- l HOSE, Radiator - Lower -------------------------------------------------------------------------------------------- l CLAMP, Hose to Engine ------------------------------------------------------------------·--------------------------- 1 CLAMP, Hose to Radiator -------------------------------------------------------------------------------------------- 1 DRAIN COCK ------------------· ----------------------------------------------------------------------------------------- 1 NUT, Radiator to Frame ---------------------------------------------------------------------------------------------- 2 PAD, Radiator to Frame ---------------------------------------------------------------------------------------------- 2 BOLT, Radiator to Frame _______ '------------------------------------------------------------------------------------- 2

WHEN ORDERING PARTS, ALWAYS STATE MODEL AND SERIAL NO. Of MACHINE

14 PM 2726

--------------------~~- ---------

~ bmimJ

PM 2726


NOTE 5

15

1111

~ ~


~---=

-

.... .... N N

... ....

... ...

16

... N

N .., .., ..,

-

in ....

"" ....

.... ....

c.. M 0 ,0 N J, I-

V)

Cl ::, 0 c::: ::r: V)

Cl z < Cl 0 0 ::r: ..... -::r: Q w 3: c::: w I-z ::, 0 u w' ..... ..... c::: ()

PM 2726

Item No.

l

2

3

4

5

Part No.

2D-06

4E-06

2C-620

551835

4E-06

6 20-06

7 551835

8 2C-616

9

9A 550890

9B 514428

9B 550889

9C 514429

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

210-06

619026

2C-622

551835

518233

518233

616791

4E-08

2C-824

539837

550833

551539

4E-08

2C-836

25E-17

4E-06

2C-610

550893

25E-17

4E-06

2C-610

31A 550883

31B 514426

31C 550886

31D 514427

31E 518825

PM 2726

CONSTRUCTION MACHINERY DIVISION -GRILLE, COUNTERWEIGHT, HOOD AND SHROUDS No.

Description Req'd.

NUT, Hood to Grille ____ 4

LKWSHR, Hood to Grille __ _____ 4

BOLT, Radiator & Hood to Grille __ __ 2

WASHER, Radiator & Hood to Grille__ 2

LKWSHR, Radiator & Hood to Grille _ 2

NUT, Radiator & Hood to Grille _____ 2

WASHER, Hood to Grille _____ _ _ 4

BOLT, Hood to Grille _ 4

HOOD

GAS - For Serial Group "A" Below __

GAS - For Serial Group "B" Below _

DIESEL - For Serial Group "A" Below

DIESEL - For Serial Group "B" Below

NUT, Hood to Frame 2

WASHER, Hood to Frame _ 2

BOLT, Hood to Frame _ 2

WASHER, Hood to Frame 2

PAD, Rubber - Hood to Frame _ 2

PAD, Rubber - Hood to Frame _ 2

WASHER, Hood to Frame 2

LKWSHR, Hood to Frame _ 2

BOLT, Hood to Frame _ 2

CAP, Fuel Tank _

SHROUD, Front

BAR, Bumper

1

2

LKWSHR, Bumper Bar to Frame_ 4

BOLT, Bumper Bar to Frame ____ 4

WASHER, Shroud to Frame _ 4

LKWSHR, Shroud to Frame __ _ 4

BOLT, Shroud to Frame _________ 4

PANEL, Side __ _____________ ____________ ____ 2

WASHER, Side Panel to Frame _____ __ 12

LKWSHR, Side Panel to Frame __ 12

BOLT, Side Panel to Frame___________ 12

PANEL, Hood Side

R.H. - For Serial Group "A" Below __ __

R.H. - For Serial Group "B" Below __ _

L.H. - For Serial Group "A" Below

L.H. - For Serial Group "B" Below __ __

For Tractor Logger Machines ______________ 2

Item No.


No. Req'd.

32

33

34

35

36

551434

2G-1014

552336

3G-1016

12E- l 0

BUMPER, Hood Side Panel _ 4

SCREW, Bumper to Panel _ _____ ___ _ 4

CATCH, Hood Side Panel.___ _ 4

SCREW, Catch to Frame _ 8

LKWSHR, Catch to Frame _ __ 8

37 12D-10

38 616775

39 13E-10

40 14D-10

41 62D-12

42 25E-27

NUT, Catch to Frame ____ _

WASHER, Bumper to Panel

LKWSHR, Bumper to Panel _

NUT, Bumper to Panel

NUT, Counterweight to Frame __ _

WASHER, Counterweight to Frame _

43 BOLT, Counterweight to Frame

43A l 6C- l 2224 For Standard Machines __

43B l 6C- l 2320 For T rector Logger Machines _

44 BOLT, Counterweight to Frame

44A l 6C- l 2180 For Standard Machines ________ _

44B l 6C- l 2280 For Tractor Logger Machines _____ _

45 25E-27

46 62D-12

47

47A 550583

47B 513233

WASHER, Counterweight to Frame

NUT, Counterweight to Frame _

COUNTERWEIGHT

For Standard Machines _

For Tractor Logger Machines _

48 550586 PIN, Drawbar _

49 2C- l 052 BOLT, Grille to Frame

49A 20-10

49B 4E-10

50 550252

51 550880

52 4E-05

53 1 C-520

54 lC-510

55 4E-05

56 l D-05

NUT, Grille to Frame _

LKWSHR, Grille to Frame

GRILLE

PLATE, Back-Up Lamp Mounting _

LKWSHR, Plate to Grille

BOLT, Plate to Grille

BOLT, Plate to Grille __

LKWSHR, Plate to Grille _

NUT, Plate to Grille

Serial Group "A": 75A- 8123 thru 10222, 10240 and 10247 thru 10251 75B - 6123 thru 6200 75R - 7123 thru 7154

Serial Group "B":

8

4

4

4

4

4

2

2

2

2

2

4

2

2

4

4

2

75A GAS-10223 thru 10239, 10241 thru 10246, 10252 thru 12183, l CA3 l 70 and thereafter

75A DIESEL- 102230 thru 121830, 1CB893 and thereafter 75B - 6201 thru 6270 75R - 7155 thru 7183


17 .1

~ rmrm CONSTRUCTION MACHINERY DIVISION -2 3 4 5 6

~ 9--------------- 8

u7 9

21 / 10

'~

I 11

20 19

18 17 16 15 ~12

13 ~..---~ 14 TS-2600-P

AIR CLEANER AND CONNECTIONS - GAS-WAUKESHA Item No.

Part Na. Description

No. Req'd.

l 2 3

550654 ** Al R CLEANER. ____ . ------------------550653 CAP, Air Cleaner ___________________________ _

875248 CLAMP, Hase --------------------------------------

4 HOSE, Tube to Air Cleaner 4A lM-16030 For Serial Group "A" Below ___________ _ 46 l M-16050 For Serial Group "B" Below _____________ _

5 875248 6 550650 7 551528 8 550652

9 9A 550660

96 655281

10 4H-15 11 550655 12 875248 13 550657 14 875248

CLAMP, Hose __ _ ___________________________ _

MUFFLER __ _ _ --------------------------------CLAMP, Muffler to Hood ___________________ _ CLAMP, Muffler to Adapter ______________ _

FITTING, Hose to Tube CONNECTOR - For Serial Group "A"

Bel ow _______________________ -----------------------NIPPLE - For Serial Group "B"

Below _______ -------------------------------------

CLAMP, Hose ------------------------------------ 1 TUBE, Air Cleaner ______ ----------------------- 1 CLAMP, Hose _____________ ---------------------- l HOSE, Tube to Carburetor ---------------- 1 CLAMP, Hose ------------------------------------ l

No. Item No.


15 16 17

18

550651 712175 4H-15

ADAPTER, Muffler to Manifold *HOSE, Rocker Arm Cover Breather ___ _ CLAMP, Hose ______________________ _

18A 550660 FITTING, Hose to Rocker Arm Cover CONNECTOR - For Serial Group

186 655281

19 550659 20 2C-410 21 4E-10 22 20-04

"A" Below -------------------------------------NIPPLE - For Serial Group "B" Below

STRAP, Air Cleaner Attaching __________ 2 BOLT, Air Cleaner to Reservoir ________ 4 LKWSHR, Air Cleaner to Reservoir ___ 4 NUT, Air Cleaner to Reservoir 4

Serial Group "A": 75A-8123 thru 10222, 10240, 10247 thru 10251 75B- 6123 thru 6200 75R- 7123 thru 7154

Serial Group "B": 75A - 10223 thru 10239, 10241 thru 10246, 10252 thru

12183, 1CA3170 and thereafter 75B - 6201 thru 6270 75R- 7155 thru 7183

*NOTE: When 712175 Hose is installed on serial group "A" items 98, 10, 17 and 188 must be used. **NOTE: For replacement use 1-537471 Air Cleaner plus 1-1533457 Adapter, 1-540104 Clamp & 1-540108 Clamp.


18 PM 2726

'

lirnm llm::ml

Item No.

Part No.

1 511512

2 2C-620

3 509456

4 21H-74

5 4E-06

6 20-06

7 515425

8 21H-74

9 511493

10 509304

11 507069

12 507066

13 2C-716

14 4E-07

15 507069


2 3 4

26 25 24 23

6 7 8

J' /(~\

n21 20 ~~ \

e6-9 --10

~,---11

1---12

W--13 ~14

15 16

- -17

TS-2568-P

AIR CLEANER AND MUFFLER -G.M. No.

Description Req'd.

CAP, Air Cleaner _______________________________ _

SOLT, Air Cleaner to Bracket____________ 4

BRACKET, Air Cleaner to Hood__________ 1 CLAMP, Hose to Air Cleaner ______________ _

LKWSHR, Air Cleaner to Bracket________ 4

NUT, Air Cleaner to Bracket______________ 4

HOSE, Air Cleaner to Intake Tube____ 1

CLAMP, Hose to Inlet Tube________________ 1

CAP, Rain --------------------------------------------TAIL PIPE --------------------------------------------CLAMP, Muffler to Tail Pipe ___________ _

MUFFLER --------------------------------------------SOLT, Flange to Exhaust Manifold______ 4

LKWSHR, Flange to Exhaust Manifold 4 CLAMP, Muffler to Flange _________________ _

Item No.

Part No.

16 509300

17 509303

18 509295

19 509299

20 4E-05

21 lC-516

22 20-06

23 4E-06

24 619021

25 619021

26 2C-616

27

28 941474

No. Description Req',

FLANGE, Exhaust Manifold _______________ _

GASKET, Manifold Flange _________________ _

TUBE, Air Intake Manifold ___________ _

GASKET, Manifold Flange _________________ _

LKWSHR, Flange to Intake Manifold __

BOLT, Flange to Intake Manifold _____ _

NUT, Bracket to Hood _______________________ _

LKWSHR, Bracket to Hood _________________ _

WASHER, Bracket to Hood _______________ _

WASHER, Air Cleaner & Bracket to Hood ----------------------------------------------

SOLT, Bracket to Hood _______________________ _

AIR CLEANER ASSY (See Index) .....

STRAP, Air Cleaner Mounting ___________ _

PM 2726


19

'

RrmT!1 racD:il

Item No.

A 1 2 3 4 5 6

Part No.

420696

878660 878659 878660 878661 874962


--------2

-----3

1-----5

TS-2544-P

AIR CLEANER ASSEMBLY -G.M. No.

Description Req'd.

AIR CLEANER ASSY (Inc. 1 thru 6)_________ __ ··----·--------·-· ··-····---···------------------------------§BODY - See "A" ------------------------------------------------------------------------------------------------------· ''0" RING ---·------------------------------------------------------------------------------------------------------------- 1 TRAY ----------·--------------------·---------------------------------------------------------------------------------·-------- 1 "0" RING ---------------·---···-------------------------------------------------------------------------------------------- 1 Oil CUP ---------------------------------------------------------------------------------------------------------------------- 1 ROD, Side -- .. --------------------· ·-------------------·. ------·------------------------------------------------------------- 2

§Not Sold Separately, order complete assembly.


20 PM 2726

I

~ tttm:D

Item Port No. No.

1 550654 2 550653 3 784663

4 4A 552896 48 514603

5 550650 6 551528 7 550652 8 516432 9 4H-15

10 lOA 550660

108 655281

11 550764 12 4H-15 13 551756

CONSTRUCTION MACHINERY DIVISION -2 3 4

\_g

19

~~~ 11 16 15 14 13 12

TS-2602-P

AIR CLEANER AND CONNECTIONS - DIESEL-WAUKESHA

Description

** AIR CLEANER _________ -----·

No. Req'd.

CAP, Air Cleaner ________ -·----·-----------·---CLAMP, Hose __ -~---- ____ -------------······--

HOSE, Tube to Air C/e.:,ner For Serial Group "A" Below _____________ _ For Serial Group "B" Below ___________ _

MUFFLER ____ ---------- _____ ___ --------------CLAMP, Muffler to Hood --------------------CLAMP, Muffler to Adapter ___________ _ l

* HOSE, Rocker Arm Cover Breather ____ 1 CLAMP, Hose _________ . __ _ l

FITTING, Hose to Rocker Arm Cover CONNECTOR - For Serial Group

"A" Below _____ ------------------------------NIPPLE - For Serial Group "B" Below

ADAPTER, Muffler to Manifold _______ _ CLAMP, Hose _____ ---·------------------------GASKET, Tube to Manifold ____________ _

Item No.

14 550765 15 4E-05 16 lC-512

17 17A 550660

178 655281

18 784663 19 550659 20 2(-410 21 4E-04 22 20-04


TUBE, Air Intake ____ 1 LKWSHR, Tube to Manifold ________________ 1 BOLT, Tube to Manifold __ (

FITTING, Hose to Tube CONNECTOR - For Serial Group

"A" Bel ow __________________________________ .. 1

NIPPLE - For Serial Group "B" Below 1

CLAMP, Hose _____ . ____________ ___________ 1

STRAP, Air Cleaner Attaching............ 2 BOLT, Air Cleaner to Reservoir __________ 4 LKWSHR, Air Cleaner to Reservoir ____ 4 NUT, Air Cleaner to Reservoir ______ 4

Serial Group "A": 75A- 8123D thru 10222D 75B - 6 l 23D thru 6200D 75R - 7123D thru 7154D

Serial Group "B": 75A-10223D thru 12183D, 1CB893 and thereafter 75B - 6201 D thru 6270D 75R- 7155D thru 7183D

*NOTE: When 516432 Hose is installed in serial group "A" items 9, 10B, 12 and 17B must be used. **NOTE: For replacement use 537471 Air Cleaner plus 1-1533457 Adapter, 1-540104 Clamp & 1-540108 Clamp.

WHEN ORDERING PARTS ALWAYS STATE MODEL AND SERIAL NO. OF MACHINE

PM 2726 21

I n 0 2:

"' ... :a C: n ... -0 2:

3: :ti,

n :r: -2:

0 -< -"' -0 2:

CONSTRUCTION MACHINERY DIVISION -ACCELERATOR PEDAL AND LINKAGE - DIESEL-WAUKESHA Item No.


No. Req'd.

25E-13 WASHER, Bell Crank Arm ----------------

2 513005 BRACKET, Bell Crank --------------------------

3 1F-310 COTTER, Arm to Bracket ___________________ _

4 25E-13 WASHER, Bell Crank Arm ___________________ _

5 513007 ARM, Bell Crank --------------------------------

6

7

8

9

10

11

551090

513002

4E-04

l C-409

551514

llA 513008

11 B 514620

12 551015

13 lF-316

14 623762

15

16

17

18

19

20

21

22

23

l F-207

551178

623829

4F-04051

2C-448

551016

4E-04

20-04

550619

24 2C-410

24A 20-04

24B 4E-04

25 8D-04

SPRING, Shut-Off Return ___________________ _

CLIP, Return Spring __________________________ _

LKWSHR, Return Spring Clip ___________ _

BOLT, Return Spring Clip ___________________ _

GUIDE, Shut-Off Rod ______________ _

*ROD, Shut-Off

For Serial Group "A" Below _______________ _

For Serial Group "B" Below _______________ _

BRACKET, Pedal Pivot _____________________ 1

COTTER, Pedal to Bracket Pin___ ________ 1

PIN, Pedal to Bracket _________________________ _

COTTER, Clevis Pin ----------------------------

KNOB, Shut-Off Rod _______ __ _ _________ _

PEDAL, Accelerator ____________ _

PIN, Rod to Pedal ____________________________ _

BOLT, Pedal Stop ------------------------------

STOP, Accelerator Pedal ___________________ _

LKWSHR, Pedal Stop _________________________ _

NUT, Pedal Stop -------------------------------

ROD, Pedal to Flell Crank ------------------

BOLT, Bracket to Floorboard __ _______ 2

NUT, Pedal to Bell Crank ----------------- 2

LKWSHR, Pedal to Bell Crank ____________ 2

NUT, Clevis Jam --------------------------------

Item No.


No. Req'd.

26 2J-4200 CLEVIS, Rod to Bell Crank _________________ _

27 2C-410 BOLT, Bell Crank to Floorboard__________ 2

27A 2D-04

27B 4E-04

NUT, Bell Crank to Floorboard __ _____ _ 2

LKWSHR, Bell Crank to Floorboard____ 2

BELL CRANK __ -----------------------------------28 550616

29

30

31

32

33

34

35

4F-04051

l F-207

2J-4200

8D-04

4F-04051

l F-207

PIN, Clevis to Bell Crank _________________ _

COTTER, Clevis Pin -----------------------

CLEVIS, Rod to Bell Cronk ---------------

NUT, Clevis Jam --------------------------------

PIN, Clevis to Bell Crank __________________ _

COTTER, Clevis Pin ________________________ _

ROD, Accelerator

35A 551759

35B 553988

35C 514617

For Serial Group "C" Below _______________ _

For Serial Group "D" Below _____________ _

For Serial Group "B" Below ______________ _

36 2C-516 BOLT, Guide Attaching ----------------------

37

38

39

40

41

42

43

44

45

46

47

48

49

550624 GUIDE, Accelerator Rod _ -----------------

4E-05 LKWSHR, Guide Attaching _______________ _

2D-05 NUT, Guide Attaching -----------------------

551090 SPRING, Pedal Return _________ /----------

8D-04 NUT, Jam ______________ ------------~: _____________ _

1306167 BALL JOINT - (See Nafe "A") ----------

513003 ROD, Connector _____________ ---------------- ,1

lF-310 COTTER, Rod to Bell Cronk Arm _______ _

25E-13 WASHER, Bell Crank Arm _____________ _

14D-10

4F-03038

l F-208

NUT, Clevis Jam _

PIN, Clevis ________________________________________ _

COTTER, Clevis Pin ____________________ _

2J- l 0109 CLEVIS _________ --------------------------- ______ _

*NOTE: Machines in Serial Group "C" were equipped with a 1520193 Cable in this location. NOTE "A": Machines in Serial Group "C" were equipped with a 2J-4200 Clevis, 4F-04051 Pin and 1F-207 Cotter in this location.

Serial Group "A": 75A - 99880 thru 102220 75B -61900 thru 62000 75R- 71510 thru 71540

Serial Group "B": 75A-102230 thru 121830, 1CB893 and thereafter 75B - 62010 thru 62700 75R - 71550 thru 71830

Serial Group "C": 75A - 81230 thru 96380 and 9889D 75B-61230 thru 61800 75R - 71230 thru 71500

Serial Group "D": 75A - 96390 thru 9888D 75B - 61810 thru 62000 75R - 71510 thru 71540

PM 2726


23.3

~ ~


Item No.

l

Part No.

2

~ ~fef II

ti

37~ ~ 36------ () 4 f 35-@,'?)'"""--~~ 28 27 26 25 24 23

A.~~\ 34-~ \

33 -lfB 31 30 29 ~

32/

10 11

22 21

TS.2604-P

ACCELERATOR PEDAL AND LINKAGE - GAS-WAUKESHA

Description

ROD, Choke

No. Req'd.

Item No.

Part No.


NUT, Bracket to Floorboard ______________ 2 lA 551512 For Serial Group "A" Below _______________ _

22A 20-04 228 4E-04 LKWSHR, Bracket to Floorboard_ _____ 2

18 514624 For Serial Group "B" Below _____ _

2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18 19 20 21 22

551090 l F-316 623762 551178 l F-207 623829 4F-04051 550619 2C-448 551016 8D-04 4F-04051 4E-04 20-04 2C-410 2J-4200 550616 4E-04 20-04 l F-207 2C-410

SPRING, Choke Rod Return ____ _ l COTTER, Clevis Pin ___________ _ ___ l PIN, Pedal to Brocket ___ ___ ________________ 1 KNOB, Choke Rod _____ ---, __ ______________ 1 COTTER, Clevis Pin _____ ___ __ ___ ______ __ 1 PEDAL, Accelerator ___ ___ ___________________ 1 Pl N, Pede I to Rod ------------------------------ 1 ROD, Pedal to Bell Cronk ______ _________ 1 BOLT, Stop to Floorboard _________ ________ 1 STOP, Accelerator Pedal -------------------- 1 NUT, Clevis Jam -------------------------------- 1 PIN, Clevis to Bell Crank __ __________________ 1 LKWSHR, Stop to Floorboard _____ ____ l NUT, Stop to Floorboard ----------------- __ 1 SOLT, Bell Crank to Floorboard_____ ____ 1 CLEVIS, Rod to Bell Crank _____ ___ ______ 1 BELL CRANK -------------------------------------- 1 LKWSHR, Bell Crank to Floorboard ___ 1 NUT, Bell Crank to Floorboard __________ 1 COTTER, Clevis Pin ---------------------------- 1 SOLT, Bracket to Floorboard ____________ 2

Serial Group" A": 75A -8123 thru 10222, 10240 and 10247 thru 10251 75B - 6123 thru 6200 75R- 7123 thru 7154

23 24 25 26 27

28 28A 288

29 30 31 32 33 34 35 36 37 38 39

4F-04051 2J-4200 8D-04 l F-207 551015

511945 514622

551090 550624 8D-04 8D-04 4E-04 1306167 20-06 4E-06 2C-616 lF-208 4F-03038

PIN, Clevis to Bell Crank ________ CLEVIS, Rod to Bell Crank ____ NUT, Clevis Jam COTTER, Clevis Pin __ _ _____ BRACKET, Accelerator Pedal Pivot

ROD, Accelerator For Serial Group "A" Below ____ For Serial Group "B" Below _____

SPRING, Pedal Return ______ _ GUIDE, Accelerator Rod ___ _ NUT, Ball Joint Jam ____ _ NUT, Boll Joint Attaching ___ _ __ LKWSHR, Ball Joint Attaching _____ _ BALL JOINT, Rod to Carburetor_ -NUT, Guide Attaching ______ _ LKWSHR, Guide Attaching _ BOLT, Guide Attaching ____ _ COTTER, Clevis Pin _ ____ ____ _ __ PIN, Choke Rod to Choke ___ _

Serial Group "8":

l"

l l

75A-10223 thru 10239, 10241 thru 10246, 10252 thru 12183, 1 CA3 l 70 and thereafter

75B - 6201 thru 6270 75R - 7155 thru 7183


24.1 PM 2726

~ mmm

PM 2726

CONSTRUCTION MACHINERY DIVISION -N OTES

25

52 51

t\

0 :z: "' ... • C t\ ... -

0 -< -"' -0 :z:

~ ~

CONSTRUCTION MACHINERY DIVISION -ACCELERATOR PEDAL AND LINKAGE -G.M.

Item No.

f'art No.

1 F-207 COTTER


2 4F-04051 PIN, Rod to Engine ____________________________ _

3 533612 ROD, Engine Shut-Off _______________________ _

4 4E-06 LKWSHR, Bracket to Engine________________ 2

5 l C-616 BOLT, Bracket to Engine___________________ 2

6 550616 BELL CRANK, Rear ---------------------------- 1

7 521434 GUIDE, Engine Shut-Off Rod ____________ _

8 4F-04051 PIN, Clevis to Bell Crank ____________________ _

9 551090 SPRING, Rod Return --------------------------

10 l F-207 COTTER _____________________ ... _______________ _

11 2C-412 BOLT, Guide & Bell Crank to Bracket 2

12 *CABLE, Emergency Engine Shut-Off ___ _

13 l F-316 COTTER ____________________________ ---------------

14 623762 PIN, Pedal to Bracket ________________________ _

15 533585 KNOB, Engine Shut-Off Rod _____________ _

16 1 F-207 COTTER ----------------------------------------------

17 623829 PEDAL, Accelerator ----------------------------

18 4F-04051 PIN, Rod to Pedal___ ____________________________ _

19 550619 ROD, Pedal to Bell Crank _________________ _

20 2C-448 BOLT, Stop to Floorboard _________________ _

21 551016 STOP, Pedal ______ --------------------------------

22 4E-04 LKWSHR, Stop to Floorboard ____________ _

23 20-04 NUT, Stop to Floorboard ___________________ _

24 8D-04 NUT, Clevis Jam _________________________________ _

25 2J-4200 CLEVIS, Rod to Bell Crank. ________________ _

26 2C-4 l O BOLT, Bell Crank to Floorboard________ 2

27 550792

28 4E-04

29 20-04

BELL CRANK, Front __________________________ _

LKWSHR, Bell Crank to Floorboard____ 2

NUT, Bell Crank to Floorboard__________ 2

Item No.

30

Part No.

4F-04051

No. Des~rlptloa Req'd.

PIN, Rod to Bell Crank -------------------

31 1 F-207 COTTER ---------------------------------------------

32 4F-04051 PIN, Clevis to Bell Crank ___________________ _

33 1 F-207 COTTER _ ----------------------------------------

34 2C-4 l O BOLT, Bracket to Floorboard______________ 2

34A 4E-04

348 20-04

LKWSHR, Bracket to Floorboard________ 2

NUT, Bracket to Floorboard_______________ 2

35 551015 BRACKET, Pedal Pivot ________________________ _

36 551090 SPRING, Rod Return --------------------------

37 2C-616 BOLT, Guide to Frame ______________________ _

38 529364 GUIDE, Accelerator Rod _____________________ _

39 4E-06 LKWSHR, Guide to Frame __________________ _

40 20-04 NUT, Ball Joint to Engine ___________________ _

41 4E-04 LKWSHR, Ball Joint to Engine. __________ _

42 8D-04 NUT, Ball Joint Jam ___________________________ _

43 1306167 BALL JOINT, Rod to Engine _____________ _

44 20-06 NUT, Guide to Frame _______________________ _

45 530927 ROD, Accelerator __________ ---------------------

46 530930 ROD, Bell Crank to Engine _______________ _

47 80-04 NUT, Clevis Jam --------------------------------

48 2J-4200 CLEVIS, Rod to Bell Crank _______________ _

49 80-05 NUT, Ball Joint Ar1m ---------------------------

50 1301361 BALL JOINT ----------------------------------------

51 4E-05 LKWSHR, Ball Joint to Bell Crank _______ _

52 20-05 NUT, Ball Joint to Bell Crank ___________ _

53 530932 BRACKET, Bell Crank & Guide to Engine _______________ ·----------------------------

54 4E-04 LKWSHR, Bell Crank & Guide to

Bracket -------------------------------------------- 2

55 20-04 NUT, Bell Crank & Guide to Bracket__ 2

*Furnished with engine. See your local GM distributor' for replacement or ser,ice on this part.

PM 2726


27.1

'

~ Dmic:mtl

Item No.

2 2A 2B

3 4 5

6 7 8 9

10 11 12 13 14 15 16 17

18

2

18

Part No.

6H-9

552298 514608

62F-4 552826 6H-9

4E-06 20-06 6H-9 20-06 4E-06

69F-4

62F-4 2C-616

620558 550984

Serial Group "A":

CONSTRUCTION MACHINERY DIVISION m 3 4 5 6 7 8

16 TS-2717-P

FUEL LINES - GAS-WAUKESHA

Description

CLIP, Fuel Line ________________________ ------------------ _

FUEL LINE, Tank to Fuel Pump

For Serial Group "A" Below-----·---·-------·-------------·----·-----·-------------------------------- __ For Serial Group "B" Below _ _

ELBOW, Line to Fuel Pump _____ ------------------------------------------------------------------- ______ _ FUEL LINE, Fuel Pump to Carburetor --·-----------------------------------------------------,--CLIP, Fuel Line ----------------------------- ________ --------·---------------------------------------··-----------LKWSHR, Clip to Frame---··------·----------------------------------------·--------------- _____________________ _

NUT, Clip to Frame ---------------------------------------------------------------------------------------------- _ CLIP, Fuel Line ---------------------------------------------···----------- ----------··--------------------------------- .. ___ _ NUT, Clip to Frame ----------------------------------------------------------'-------------------------------------- ·LKWSHR, Clip to Frame ----------------- ------------------------------------------------------------------- ---·--FUEL TANK - (See Index) ____________ -------------------------------------- _______ --------------------·- ___ _

VAL VE, Fuel Shut-Off --------------------------------------------------------------------------------------------------CARBURETOR - (See Index)----------------------------------------------- -------------------------- _____ _

No. Req'd.

ELBOW, Line to Carburetor ------------------------- ---------------------- ---------------- __ ________________ _ l BOLT, Clip to Frame ----------------------------- ·-------------------------- ____________ ----------------------------- 2 FUEL PUMP - (See Index) ------------------------------------------------------ ------- -- ________ _ ELBOW, Hose to Fuel Pump --------------------------------- ____ ------· ___________ --· HOSE, Line to Fuel Pump _____ --------------------------'---------------·-- ·- _______ _

Serial Group "B": 75A - 8123 thru 10222, 10240 and 10247 thru 10251 758 - 6123 thru 6200

75A-10223 thru 10239, 10241 thru 10246, 10252 thru 12183, 1CA3170 and thereafter

75R - 7123 thru 7154 758 - 6201 thru 6270 75R - 7155 thru 7183


28 PM 2726

I

I

~ mmml

Item No.

2

3

4

5

6

7

8

9

10

11

Part No.

527609

531165

900148

6H-10

69F-5

42F-6

509291

30K-304

553973


TS-2560-P

FUEL LINES -G.M. No.

Description Req'd.

HOSE, Fuel Return·-···········.······································-··············-········--····--·-····-···-···--··

ELBOW, Nozzle to Hose ..... ··········-···· ...... ·········-····-···-·--······----------------------------------

LINE, Fuel Return ······-·········-···-·····-··-············-··-···-·····-····--··-···---·------------·--------------------·

CLIP, Fuel Line -------------------------------------------------------------------·-- 1 ----------------------------- 5

FUEL TANK - See Index ..... ··················-··----·--··-····--······--·--··········-··-··········-·········----

VAL VE, Shut-Off -·······································-···· ··········------------------------------------------··

ELBOW, Fuel Return Line to Tank ·······························--·--···-·-··--··-··-··-········-·······-·-·-···

LINE, Fuel Supply ·-····-·····································-·-·····--·-·-··················-------------··--------··

ELBOW, Hose to Fi I ter --·--·--·-· ·-·--·--· -------·----·------------------------------------------------

HOSE, Fuel Supply ················-·····-··-···············-·· ·············-··-···-··-··--··-··----------·-------·----

*FUEL FILTER -·------------··-···------··---·--·-----------------·----------------------------------------------

*This part is furnished with engine, see your local GM distributor for service or replacement.

PM 2726


29

~ ~

CONSTRUCTION MACHINERY DIVISION Ill 2 3 4 5 6 8 10

14 13 12 11

Item No.

25

24

Part No.

l 5K-207 2 552017 3 6H-l

23 21 20 19 18 17 16

FUEL LINES - DIESEL-WAUKESHA

For Serial: 75A - 8123D thru 9638D and 9889D 75B - 6123D thru 6180D 75R - 7123D thru 71 SOD


NIPPLE, Tee to Pump LINE, Injector to Tee __ _ _ ___________ _ CLIP, Return Line ___ ___ _ _______________ _ FILTER ASSY, Primary Fuel (Inc. 4A) __ _

Item No.


*LINE, Fuel Supply BOLT, Bracket to Frame CLIP, Return Line

4 528374 4A 940107 tCARTRIDGE KIT, Primary Filter ___ _

14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

552300 2C-6 l 6 6H-9 4E-06 20-06 550757 2C-512 31 F-2 550983 551336 4E-05 20-05 18F-2 19F-1 62F-2

LKWSHR, Bracket to Frame _ NUT, Bracket to Frame BRACKET, Primary Filter BOLT, Filter to Bracket _ ADAPTER UNION

5 59F-6 6 6H-l 7 59F-2 8 552732 9

10 62F-5 11 69F-5 12 lC-416 12A lD-04 12B 4E-04 13 552302

t Not Illustrated

CONNECTOR, Line to Filter _______ _ CLIP, Return Line_ _ _______________ _ CONNECTOR, Line to Injector __ _ CLIP, Fuel Lines ___ ___ ___ ___ __ __ __ __ FUEL TANK - (See Index) _____________ _ ELBOW, Return line to Tank_________ _ l VAL VE, Fuel Shut-Off __ __ _ ____ _ _ l BOLT, Fuel Line Clip ___ ________ _______ ____ l NUT, Fuel Line Clip ___________ . l LKWSHR, Fuel Line Clip __ ___ _ ___ __ l LINE, Fuel Return -------------------------------- 1

HOSE, Pump to Return Line . HOSE, Filter to Pump _ LKWSHR, Filter to Bracket NUT, Filter to Bracket __ TEE, Return Line ________ _ BUSHING, Tee Reducing ELBOW, Line to Tee

*NOTE: When 552300 Line is installed on 75A Serial 8123D thru 8498D one 69F-5 Shut-Off Valve must be used.


30

TS-2722-P

No. Req'd.

l 2 l 2 2 1 4 1 1 1 4 4 l 1

PM 2726

I

I

~ ll1!Irm CONSTRUCTION MACHINERY DIVISION -

2 3 4 5 6 7 9 10 11

b

17 I I 13

~14

TS-2580-P

FUEL TANK Item No.


No. Req'd.

1 l 4D-10 NUT, Sender Terminal . l 2 l 2E-10 LKWSHR, Sender Terminal l 3 551384 **SENDER UNIT, Fuel . ... l 4 3G- l 008 SCREW, Sender Unit to Tank . 5 5 l 2E-10 LKWSHR, Sender Unit to Tank 5 6 627982 GASKET, Sender Unit to Tank l 7 522632 CLAMP, Hose . ...... 2 8 550712 HOSE, Fuel Filler l 9 517617 STRAP, Fuel Tank Tie ....... .... 1

l O 4E-06 LKWSHR, Tie Strap to Mounting Strap 2 11 2D-06 NUT, Tie Strap to Mounting Strap 2 12 2C-828 BOLT, Fuel Tank to Frame ............. 2

13 13A 550711 13B 518233

PAD, Fuel Tank to Frame For Serial Group "A" Below For Sario! Group "B" Below .

2 2

Item No.

14 15 16 17 18 19 20 21

Part No.

21D-08 2C-616 517073 517616 2D-06 4E-06 103293 2C-616


I NUT, Fuel Tank to Frame 2 BOLT, Tie Strap to Mounting Strap... 2

*TANK, Fuel ..... . .............. l STRAP, Fuel Tank Mounting . 1 NUT, Mounting Strap to Shroud ... . ... 2 LKWSHR, Mounting Strap to Shroud .. 2 WASHER, Mounting Strap to Shroud.. 2 BOLT, Mounting Strap to Shroud 2

Serial Group "A": 75A- 8123 thru 10557 75B-6123 thru 6210 75R - 7123 thru 7157

Serial Group "B": 75A GAS- 10558 thru 12183, 1CA3170 and thereafter 75A DIESEL- 10558D thru l2183D, 1CB893 and thereafter 75B - 6211 thru 6270 75R - 7158 t~ru 7183

*NOTE: When 517073 Fuel Tonk is installed in machines in serial group "A" use one 942424 Fuel Tonk Mounting Kit. 942424 Kit includes items 9 thru 15, 17 thru 21.

**NOTE: For replacement use 947263 Kit.


PM 2726 31.1

w N

40

39

38

2 5

37 36 35

7 8 9 10 11 12 13 14 15

19

20

27 28

32 31 30 29

FUEL LINES - DIESEL - WAUKESHA TS-2720-P "' " "' ml.----------------------------------------.1

" 0 2: en ... :ii,

C

" ...

t:, -< -en

0 2:

I

I

I

CONSTRUCTION MACHINERY DIVISION -FUEL LINES - DIESEL-WAUKESHA

For Serial: 75A - 96390 thru 98880, 98900 thru 121830, 1 C8893 and thereafter 758 - 6181 D thru 62700

Item No.

2

Part No.

618298

3 356612

4 618298

5 550983

6

7

2D-05

4E-05

8 528374

8A 940107

9 59F-6

10

lOA 553985

lOB 514605

lOC 528365

11 59F-6

12 751794

13 59F-6

14 553984

15 2C-620

15A 2D-06

15B 4E-06

16

17 62F-5

18 69F-5

19 552732

20 552732

21 2C-620

21 A 2D-06

21 B 4E-06

75R-7151D thru 71830


ELBOW, Hose to Pump __ _

SEE ENGINE PARTS MANUAL ____ _

BUSHING, Filter Reducing

ELBOW, Hose to Manifold __

HOSE, Manifold to Return Line __ _

NUT, Filter to Bracket ____ _ . -- 4

LKWSHR, Filter to Bracket __

FILTER ASSY, Primary Fuel (Inc. SA)

tCARTRIDGE KIT, Primary Filter __

CONNECTOR, Line to Filter _

LINE, Hand Pump to Filter

For Serial Group "A" Below ___________ _

For Serial Group "B" Below

For Serial Group "C" Below __

CONNECTOR, Line to Hand Pump

PUMP, Hand Primer _

CONNECTOR, Line to Hand Pump _

LINE, Tank to Hand Pump _

BOLT, Clip to Frame ____ _

NUT, Clip to Frame ___ __

4

LKWSHR, Clip to Frame - -- l

FUEL TANK - (See Index) ___ _

ELBOW, Return Line to Tank

VAL VE, Fuel Shut-Off ________ _

CLIP, Fuel Lines ________________________________ _

CLIP, Fuel Lines _____ ________ _ __ _____________ l

BOLT, Bracket to Frame---------------------- 2

NUT, Bracket to Frame _

LKWSHR, Bracket to Frame _

2

2

tNot Illustrated

Serial Group "A": 75A - 9639D thru 9888D, 9890D thru 102510 758-61810 thru 62000 75R - 71510 thru 71540

Item No.

Part No.

22 553986


BRACKET, Hand Pump Mounting ____ _

23 2G~ 1018 SCREW, Pump to Bracket _ _ _________ 2

23A 14D-10

238 12E-10

24 550757

NUT, Pump to Bracket ___ _ _ _ _ _ __ __ 2

25

26

2C-620

6H-9

27 4E-06

28 2D-06

29

29A 552302

29B 514606

30 62F-6

31 553982

LKWSHR, Pump to Bracket _

BRACKET, Primary Filter

BOLT, Clip to Frame _

CLIP, Return Line ___ _

LKWSHR, Clip to Frame ______________ _

NUT, Clip to Frame --------------------

LINE, Return Fuel

For Serial Group "A" Below ___________ _

For Serial Groups "B" & "C" Below __

ELBOW, Line to Filter _

LINE, Primary to Secondary Filter

2

32 2C-512 SOLT, Filter to Bracket _ ----- - ------ 4

33 62F-6 ELBOW, Line to Filter __ _

34 550757 BRACKET, Secondary Filter Mounting

35 2C-616

35A 20-06

358 4E-06

BOLT, Primary & Secondary Bracket__ 4

NUT, Primary & Secondary Bracket _ 4

LKWSHR, Primary & Secondary Bracket _ __ ______________ 4

36 2D-05

36A 4E-05

37 618298

38 356612

39 550876

40 553858

NUT, Filter to Bracket __ __

LKWSHR, Filter to Bracket _ I

ELBOW, Hose to Filter

BUSHING, Filter Reducing

HOSE, Secondary Filter to Pump _______ _

FILTER, Secondary Fuel (Inc. 40A) ____ _

40A 945353 tCARTRIDGE KIT, Secondary Filter __ _

Serial Group "B": 75A- 102230 thru 119420 758-61810 thru 6270D 75R-71510 thru 71830

Serial Group "C": 75A - 119430 ,thru 121830, l (3893 and thereafter

4

4

PM 2726


33

~ mmm CONSTRUCTION MACHINERY DIVISION -1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

\~ \t~!-=====-\\-\j r•)=tJJ_, 44 43 42 41 40 39 I

45 46 47 48 49 50 51 52 53 54 55 56 57 I 58

\ \ I I I I I l I l l \ \ \. I L A I J L:r !

/J·a,11 CO ~QQ00'3,~,~~-1 .'~·~.··

' t t t I t • t \ t \ L~·~ 81 80 79 78 77 76 75 ~.

82 83 84 85 86 87 88 89 90 91

0 92 93 94 r

1 : J !

\\1~oc,t- i . ,tr;i, ~.d_J , i··:S·

125 124123 'I \ '\ \ I 1 ~ , · l ~i 122 121 120 ns 118 1 \ ',~-,l~ I\ 126 127 128 129 130 131 I I .

,,·~~ ~t\ r~\-c;~~~r~f _J i 164 163 162 161 rno 159 158 151 156 155 154 153 152 151 I

165 166 167 168 169 1m 1\J~\l 175

7j;R j i

/.,(71 IT/1 ~~mj 227 226 225 224 223 222 221 220 219 218 217 216 215 214

TRANSMISSION 'ASSEMBLY - MODEL 75A TS-2588

34 PM 2726

I

r;mnrn ammmm CONSTRUCTION MACHINERY DIVISION -

16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

M'i~'t,..bcl J ! l,l 11 · \ t -- 1 t 1 t\ ·' \ ~ ~

I 38 37 36 35 34 33 32 31 I 59 60 61 62 s3 64 65 66 67 68 69 10 11

;ii! ~~~1~u i , .. \~ I u 1~ 'r\ . 'f ,f 1 ,, _ 95 .. 96 97 98 99 100101 102 103 104 105 106 107

,r, . ~· d . ,? :::-1~ . ~ . . 1 i ,,.J . ) l J ~ ' t .' t t t ., t \ J\ 1 ' .'. ! '·,('. >ft 1 i\/;,g ')' ,l~tli. f\·(lh1·J· · · -\'~ :~rn, ~ \ .,· (j \J'eJ_ "\JV W/''l"r ~/1:/'}1 f '\ 'l \ , / 111

117 116 115 114 113 112 111 110 109 108 132 ·133 134 1~5 1f 6 lf 1~8 ~ 1J9 JO" . 141

: I 11L-~1r n ., Ur~ tfi /" ?~ ~ I 1150 149148 147146 145 144 143 142 ~1 191 192 193 194 195 196 197

\ ~ : ! L 181182 183184185 186181 18a 1a919~. l. U.. _)_~98

208 207 206205 204 203 202 201 200 213 212 211 210 209

TRANSMISSION ASSEMBLY - MODEL 75A TS-2588

PM 2726 35

~ ~


TRANSMISSION ASSEMBLY - MODEL 75A No.

-No. Item

No. Part No. Description Req'd.

Item No.


A B 280636

C 280071

l 201951 2 209343 3 100949 4 206864 5 209340 5A 209341 58 209342

TRANSMISSION ASSY (Inc. 1 thru 227) *(T-75A-l) For Serial 8123 thru 9179,

9181 thru 9190, 9192, 9193, 9194, 9214 thru 9217, 9219, 9220, 9221, 9223,9224,9225,9227,9228,9230

*(T-75A-3) For Serial 9180, 9191, 9195 thru 9213, 9218, 9222, 9226, 9229, 9231 thru 12183, 1CA3170 & thereafter & 1 CB893 & thereafter

NUT, Input Flange FLANGE ASSY, Input (Inc. 3) DEFLECTOR, Input Flange ..... SEAL, Input Shaft Oil .

:j:SHIM, Bearing Cap - .004 :j: 3HIM, Bearing Cap - .007 .. :j:SHIM, Bearing Cap - .010 ....

6 SHAFT, Input 6A 800810 **For Serial Group "A" (See Page 38) 68 216674 For Serial Group "B" (See Page 38)

7 675544 CUP~ Input Shaft Bearing 8 675547 CONE, Input Shaft Bearing . · 9 209377 GEAR, Input Shaft Reverse (45T) .....

10 675547 CONE, Input Shaft Bearing 11 675544 CUP, Input Shaft Bearing l lA 223881 tRING, Bearing Locating 12 209368 SHAFT, Input Quill .... 13 209369 GEAR, Input Shaft Forward (43T) .. 14 675548 CONE, Quill Shaft Bearing ... 15 675544 CUP, Quill Shaft Bearing 16 221401 GASKET, Clutch Cover 17 209392 :j:SHIM, Bearing Cap - .004 . 17A 209393 :j:SHIM, Bearing Cap - .007 . 17B 209394 +SHIM, Bearing Cap-.010. 17C 221208 :j:SHIM, Bearing Cap - .020 18 25K-30016 "O" RING, Bearing Cap ......... . 19 209391 CAP, Clutch Bearing ............. . 20 209387 RING, Drum Hub Sealing ..... .... . .. 21 222410 DRUM ASSY, Clutch (Inc. 21A, 21B) 21A 222407 tHOUSING, Bleed Valve ....... . 21 B l OJ-06 tBALL, Bleed Valve ... 21 C ---- t§HUB, Clutch Drum (See 21) . 21 D 209932 tPIN, Pressure Relief .......... . 21 E 209389 tSPRING, Pressure Relief ....... . 21 F 220678 tGUARD, Relief Spring 21 G 209937 tWASHER, Relief Spring ................. . 21 H 619023 tWASHER, Clutch Drum Balance .. . 21J 100284 tBOLT, Drum to Hub ....................... . 22 234038 RING, Piston Inner Sealing ............. . 23 221996 PISTON, Clutch ............. . ............. . 24 221998 DISC, Clutch Outer ...... . ............ . 25 208773 DISC, Clutch Outer ......... .. ····-·--·---26 208760 PLATE, Clutch Disc End ......... . 27 223942 RING, End Plate Retaining .............. . 28 224068 RING, Clutch Disc Hub Retaining ...... . 29 209358 COVER, Clutch ................................. . 30 5C-614 BOLT & LKWSHR, Clutch Cover ....... .

tNot Illustrated tAs Required

1 1 2 1 l 1 l l 1 1 l l 8 1 l 1 4 l 1 2 l

10

31 HUB, Clutch Disc 31A 800810 **For Serial Group "A" (See Page 38) 31B 216673 For Serial Grou5 "B" (~ee Page 38) ·32, - '-~OS31 Huf3 ·-F11-ie. 1'J...111it;_. 32 216697 SPRING, Clutch Disc Release . 33 216677 DISC, Clutch Inner 34 208776 RING, Piston Outer Sealing 35 224097 RING, Drum Hub Retaining 36 l C-718 BOLT, Bearing Cap 37 4E-07 LKWSHR, Bearing Cop ........ 38 675548 CONE, Quill Shaft Bearing . 39 675544 CUP, Quill Shaft Bearing . 39A 223881 RING, Bearing Locating ... 40 209339 CAP, Input Shaft Bearing . 41 4E-07 LKWSHR, Bearing Cap .. 42 lC-718 BOLT, Bearing Cap . 43 lF-424 COTTER, Flange Nut .... 44 224068 RING, Clutch Disc Hub Retaining . 45 223942 RING, End Plate Retaining 46 208760 PLATE, Clutch Disc End . 47 216697 SPRING, Clutch Disc Release 48 216677 DISC, Clutch Inner ...... 49 221998 DISC, Clutch Outer . 50 221996 PISTON, Clutch 51 208776 RING, Piston Outer Sealing 52 224097 RING, Drum Hub Retaining .... 53 222410 DRUM ASSY (Inc. 53A, 53B) . 53A 222407 tHOUSING, Bleed Valve 538 lOJ-06 tBALL, Bleed Valve 53C ---- t§:,UB, Clutch Drum (See 53) 53D 209932 tPIN, Pressure Relief . 53E 209389 tSPRING, Pressure Relief .. 53F 220678 tGUARD, Relief Spring .. 53G 209937 tWASHER, Relief Spring . 53H 619023 tWASHER, Clutch Drum Balance 53J 100284 tBOLT, Drum to Hub ... 54 209387 RING, Drum Hub Sealir,g 55 209391 CAP, Clutch Bearing .. 56 25K-30016 "O" RING, Bearing Cop . 57 209392 +SHIM, Bearing Cap - .004" .. 57A 209393 +SHIM, Bearing Cap - .007'' 57B 209394 +SHIM, Bearing Cap- .010". 57C 221208 +SHIM, Bearing Cap - .020" 58 800815 CASE ASSY, Transmission (Inc. 129,

59 675544 130, l ~7, 207, 208, 209) ....

CUP, Quil Shaft Bearing ... 60 675548 CONE, Quill Shaft Bearing . 61 209368 SHAFT, l st & 3rd Quill .... 62 209374 GEAR, 1st & 3rd Drive (29T) . 63 675548 CO'JE, Quill Shaft Bearing . 64 675544 CUP, Quill Shaft Bearing . 64A 223881 tRING, Bearing Locating

65 SHAFT, 1st & 3rd Drive 65A 800809 **For Serial Group "A" (See Page 38) 656 216671 For Serial Group "B" (See Page 38)

66 675544 CUP, Drive Shaft Bearing

§Not Sold Separately -

10 5 1 l 4 4 1 1 l 1 4 4 1 2 l l

10 5 l l l 1 1 1 1 1 1 1 1 1 1 8 2 1 1

l l l 1 1 1 l 1

*NOTE: For complete replacement of 280636 or 280071 Trans. Assy. use 281740 Trans. Assy. **NOTE: 800809, 800810 and 800811 Shaft and Hub Kits include Drive Shaft~~ ~ne 216673 Clutch Disc Hub. After these Kits

have been installed in unit use parts listed for serial group "B" for su~sequent replacement.


36.1 ,_

PM 2726

I

I

CONSTRUCTION MACHINERY DIVISION Ill TRANSMISSION ASSEMBLY - MODEL 75A {Continued)

Item No.

Part No.

66A 223881 67 675547 68 209375 69 675547 70 675544 71 209364 72 lC-718 73 4E-07 74 209365 74A 209366 748 209367 75 4E-07 76 lC-718 77 234038 78 208773


tRJNG, Bearing Locating CONE, Drive Shaft Bearing . GEAR, 1st & 3rd Drop (44T) CONE, Drive Shaft Bearing CUP, Drive Shaft Bearing ·---------- .... CAP, Drive Shaft Bearing ·---·-······--·-·- . BOLT, Bearing Cap ............. . LKWSHR, Bearing Cap .

:j:SHIM, Bearing Cap - .004" -· :j:SHIM, Bearing Cap - .007'' :j:SHIM, Bearing Cap - .01 O"

LKWSHR, Bearing Cap BOLT, Bearing Cap RING, Piston Inner Sealing . DISC, Clutch Outer ..

1 1 1 1 1 1 4 4

4 4 1 4

79 HUB, Clutch Disc 79A 800809 **For Serial Group "A" (See Page 38) 79B 216673 For Serial Group "B" (See Page 38)

80 lC-718 81 4E-07 82 675542 83 675545 84 224031

BOLT, Bearing Cap .... 4 LKWSHR, Bearing Cap . 4 CUP, Drive Shaft Bearing . 1 CONE, Drive Shaft Bearing 1 RING, 2nd & 4th High Gear Locating 1

85 SHAFT, 2nd & 4th Drive 85A 800811 **For Serial Group "A" (See Page 38) 858 216672 For Serial Group "B" (See Page 38)

86 675546 87 675542 87A 223951 88 675544 89 675548 90 209368 91 675548 92 675544 93 221401 94 209392 94A 209393 948 209394 94C 221208 95 209391 96 209387 97 222410 97A 222407 97B lOJ-06 97C ----97D 209932 97E 209389 97F 220678 97G 209937 97H 619023 97J 100284 98 224097 99 208776

100 221996 101 221998

CONE, Drive Shaft Bearing 1 CUP, Drive Shaft Bearing 1

tRJNG, Bearing Locating 1 CUP, Quill Shaft Bearing 1 CONE, Quill Shaft Bearing . 1 SHAFT, 2nd & 4th Quill 1 CONE, Quill Shaft Bearing 1 , CUP, Quill Shaft Bearing 1 GASKET, Clutch Cover 1

:j:SHJM, Bearing Cap - .004" :j:SHJM, Bearing Cap - .007'' .. :j:SHIM, Bearing Cap - .010". :j:SHIM, Bearing Cap - .020"

CAP, Clutch Bearing 1 RING, Drum Hub Sealing ···-·- .- 2 DRUM ASSY, Clutch (Inc. 97 A, 978) _ 1

tHOUSING, Bleed Valve -·-·--···---··-···- 1 tBALL, Bleed Valve ----------·- -··· ··-··------ 1

t§HUB, Clutch Drum (See 97) . -----·-----· tPIN, Pressure Relief . ····-···----·-·-tSPRING, Pressure Relief ··-·--tGUARD, Relief Spring _____________ -··----tWASHER, Relief Spring __ _ tWASHER, Clutch Drum Balance . --· __ 1 tBOLT, Drum to Hub -------·---·-·---- _________ 8

RING, Clutch Drum Hub Retaining ____ 1 RING, Piston Outer Sealing ________________ 1

PISTON, Clutch ----·---------------------------- 1 DISC, Clutch Outer------------------------------ 1

tNot Illustrated tAs Required §Not Sold Separately

Item No.

Part No.

102 216677 103 208760 104 224068 105 209358 106 5C-614

107 107 A 800811 107B 216673


DISC, Clutch Inner _____ 5 PLATE, Clutch Disc End 1 RING, Clutch Disc Hub Retaining 2 COVER, Clutch ---------·····----- __ ____ 1 BOLT & LKWSHR, Clutch Cover . 10

HUB, Clutch Disc **For Serial Group "A" (See Page 38)

For Serial Group "B" (See Page 38)

108 216697 RING, End Plate Retaining -·-----·-·-··· l 109 216697 SPRING, Clutch Disc Release ·····------ 1 110 208773 DISC, Clutch Outer _____________ ------·----- 4 111 234038 RING, Piston Inner Sealing 1 112 1 C-718 BOLT, Bearing Cap ·--·- 4 113 4E-07 LKWSHR, Bearing Cap _ -· 4 114 25K-30016 "O" RING, Bearing Cap ·-······--- 1 115 209369 GEAR, 2nd & 4th Drive (43T) 1 116 220395 GEAR, Drive Shaft Low (32T) 1 117 209421 GEAR, Drive Shaft High (57T) _ _ 1 118 209417 :j:SHJM, Bearing Cap - .004" __ 118A 209418 :j:SHIM, Bar)ng Cap - .007'' .. 118B 209419 :j:SHIM, Bearing Cap - .01 O" .. 119 209416 CAP, Drive Shaft Bearing ···---····

120 120A 800811 1208 216673

HUB, Clutch Disc **For Serial Group "A" (See Page 38)

For Serial Group "B" (See Page 38)

121 209370 GASKET, Clutch Cover _ 1 122 209357 COVER, Clutch ·-··-·-·-···-·-·- 1 123 216677 DISC, Clutch Inner ·····-····- ---·- 5 124 221996 PISTON, Clutch __ ··-- ---·-- .. _ __ ___ 1 125 224097 RING, Clutch Drum Hub Retaining _____ 1 126 209387 RING, Clutch Drum Hub Sealing _ _____ 2 127 25K-30016 110" RING, Bearing Cap ---· .. .. 1 128 209392 :j:SHIM, Bearing Cap - .004" ---·---l 28A 209393 :j:SHIM, Bearing Cap - .007" ·-----·---·-1288 209394 :j:5HIM, Bearing Cap- .010" __ _ l 28C 221208 :j:SHIM, Beadng Cap - .020" _ 129 209353 GASKET, Oil Pan ------- - - ··-·- 2

130 130A 209103 1308 220673

131 675544 132 675548

PIPE, Oil Suction For T-7 5A- l -·-------------· _____ _ For T-75A-3 ________________ ----·--- ---·---

CUP, Quili Shaft Bearing ---·---CONE, Quill Shaft Bearing .--

133 SH AFT, Reverse Drive 133A 800809 **For Serial Group "A" (See Page 38) 1338 216671 For Serial Group "B" (See Page 38)

134 675544 134A 223881 135 675547 136 675547 137 675544 138 lC-718 139 4E-07 140 209364

CUP, Drive Shaft Bearing -··--- 1 tRING, Bearing Locating _________________ 1 CONE, Drive Shaft Bearing ·---- __________ 1 CONE, Drive Shaft Bearing ____ ---·------ 1 CUP, Drive Shaft Bearing -------------------- 1 BOLT, Bearing Cap ---------·---·-------------- 4 LKWSHR, Bearing Cap -------· --·------------ 4 CAP, Reverse Shaft Bearing _ ____________ 1

**NOTE: 800809, 800810 and 800811 Shaft and Hub Kits include Drive Shaft and one 216673 Clutch Disc Hub. After these Kits have been installed in unit use parts listed for serial group "B" for subsequent replacement.


PM 2726 37.1

·-

~ llmm CONSTRUCTION MACHINERY DIVISION -TRANSMISSION ASSEMBLY - MODEL 75A (Continued) Item No.

Part No.

141 209365 141A 209366 141B 209367 142 209372 143 675544 143A 223881 144 675548 145 209371 146 209368

147 147A 209354 147B 220669

148 209391 . 149 4E-07

150 lC-718 151 222410 151A 222407 151 B lOJ-06 l51C ----1510 209932 l51E 209389 l51F 220678 151G 209937 151 H 619023 l5lJ 100284 152 234038 153 208776 154 221998 155 208773 156 216697 157 208760 158 223942 159 224068 160 5C-614 161 205928 162 209414 163 100949 164 206864 165 209428 166 713997 167 234650 168 209434 169 209433 170 201566 171 209430 172 lOJ-12 173 201413 174 209431 175 5C-612 176 209432 177 209407 178 209409


isHIM, Bearing Cap - .004" ____________ _ *SHIM, Bearing Cap - .007'' _____________ _ isHIM, Bearing Cap - .010" ---·--------GEAR, Reverse Idler (52T) ______________ _ CUP, Quill Shaft Bearing _______________ _

tRING, Bearing Locating _______________ _ CONE, Quill Shaft Bearing _____________ _ GEAR, Reverse Shaft Drive (54T) ______ _ SHAFT, Reverse Quill --------------------------

SCREEN ASSY, Oil Far T-75A-l ________________________________ ----For T -7 5A-3 ----------------------------------------

CAP, Clutch Bearing ___________ __________ _ 1 LKWSHR, Bearing Cap _ ___________ __ ___ _ 4 BOLT, Bearing Cap _ _________________ _ ___ 4 DRUM ASSY, Clutch (Inc. 151 A, 151 B) l

tHOUSING, Bleed Valve ___________________ 1 tBALL, Bleed Valve _______________________ . l

t§HUB, Clutch Drum (See 151) __ ___________ l tPIN, Pressure Relief _______ ---------------.-- l tSPRING, Pressure Relief _______________ __ l tGUARD, Relief Spring _____ . __________ 1 tWASHER, Relief Spring _ ____________ _ __ 1 tWASHER, Clutch Drum Balance__________ 1 tBOLT, Drum ta Hub _______________________ ___ 8 RING, Piston Inner Sealing _____________ . 1 RING, Piston Outer Sealing____ 1 DISC, Clutch Outer ___ __________ _ _ ___ l DISC, Clutch Outer _________________ . __ ____ 4 SPRING, Clutch Disc Release __________ l 0 PLATE, Clutch Disc End _______ _____ _____ 1 RING, End Plate Retaining -----------··· . 1 RING, Clutch Disc Hub Retaining 2 SOLT & LKWSHR, Clutch Cover ______ 16

**NUT, Output Flange -----------------------· . l **FLANGE ASSY, Output (Inc. 163) ______ 1 **DEFLECTOR, Output Flange______________ l **SEAL, Output Shaft Oil ____________________ l **CAP, Output Shaft Bearing ________________ 1 **BEARING, Output Shaft ____________________ l **SEAL, Shift Shaft Oil -------------------------- l **SHAFT, Rear Output Shift __________________ l **FORK, Output Shaft Shift _________________ l **SCREW, Shift Fork Lack ______________________ l **HOUSING, Rear Output Shaft.___________ l **BALL, Mesh Lock---------------------------------- l **SPRING, Mesh Lock ---------------------------- l **COVER, Output Shaft Housing __________ l **BOLT & LKWSHR, Housing Cover______ 6 * *GASKET, Housing Cover _ __________________ 1 **WASHER, Output Shaft Gear Thrust__ l **HUB, High & Low Shift ------------------------ l

iAs Required tNot Illustrated §Not Sold Separately

Serial Group "A": 8123 thru 9253, 9255 thru 9267, 9269 thru 9284, 9290, 9291,

9297, 9299, 9300, 9302, 9304, 9313, 9316, 9322, 9326, 9354, 9359, 9361, 9362, 9377, 9397, 9417, 9494, 9521, 9522, 9524.

Item No.

Part No.

179 209423 179A 225408 180 800656


**SHAFT, Output (Inc. 179A) t BUSHING, Shaft -----------------------------

**GEAR, Output Shaft Low (Inc. Bushing & 181) 55T ---------------------

181 209673 **RING, Low Gear Oil ------------------------182 209407 **WASHER, Output Shaft Gear Thrust 183 209701 **:tSHIM, Bearing Cap - .004" -------------183A 209702**:t SHIM, Bearing Cap - .007" --------------1838 209703**:t SHIM, Bearing Cap - .010" ------------

1 1 1

184 209692 * * CAP, F rant Bearing -------------------------- · 1 185 206864 ** SEAL, Bearing Cap Oil ------------------ 1 186 201566 ** SCREW, Shih Fork Lock ---------------- 1 187 209403 ** FORK, High & Low Shift ----------------- 1 188 209406 **GASKET, Shift Shaft Support --------- 1 189 209405 **SUPPORT, Shift Shaft --------------------- 1 190 5C-616 **BOLT, & LKWSHR, Shift Shaft Support1 191 209404 **SHAFT, High & Low Shift --------------- 1 192 208871 **SEAL, Shih Shaft Support Oil -------- 1 193 10J-12 **BALL, Mesh Lock ---------------------------- 1 194 40K-04 **PLUG, Mesh Lock ----------------------------- 1 195 201844 **SPRING, Mesh Lock__________________________ 1 196 205928 **NUT, Output Shaft Flange -------------- 1 197 1 F-432 **COTTER, Flange Nut ----------------------- 1 198 209414 **FLANGE ASSY, Output (Inc. 199) __ 1 199 100949 **DEFLECTOR, Output Flange ---------- 1 200 1C-718 **BOLT, Bearing Cap -------------------------- 4 201 4E-07 ** LKWSH R, Bearing Cap --------------------- 4 202 675544 **CUP, Output Shaft Bearing -------------- 1 203 675548 **CONE, Output Shaft Bearing ----------- 1 204 209396 **GEAR, Output Shaft High (Inc.

205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224

525293 223780 13F-12 215644 5C-616 675548 675544 223881 209411 4E-07 lC-720 224069 209427 209426 223925 209429 4E-07 1C-718 1 F-432 356618

Bushing) 29T --------------------------------- 1 MAGNET ---------------------------------------- 1 SPRING, Magnet Retaining-------------- 1 PLUG, Drain ------------------------------------- 1 PAN, Drain -------------------------------------- 1 SOLT & LKWSHR, Oil Pan--------------- 14

**CONE, Output Shaft Bearing ------------ 1 **CUP, Output Shaft Bearing --------------- 1 **RING, Bearing Retaining ----------------- 1 **SHIM, Output Shaft Housing ------------ 1 * * LKWSH R, Housing to Case-------------- 7 **SOLT, Housing to Case -------------------- 7 **RING, Bearing Locating ------------------- 1 **HUB, Rear Output Shaft Shift ---------- 1 **SHAFT, R~ar Output------------------------ 1 **RING, Rear Output Shaft Locating ___ 1 **GASKET, Bearing Cap --------------------- 1 **LKWSHR, Bearing Cap--------------------- 4 **BOLT, Bearing Cap -------------------------- 4 **COTTER, Flange Nut ----------------------- 1 tBUSHING, Case Reducing - 3/4" x

3/8' '-------------------------------------------------225 356626 tBUSHING, Case Reducing - 1-1/4" x

1" ------------------------------------------------ · ----- 1 226 13 F-12 t PLUG, F ii I er ------------------------------------------ 1 227 TRANSMISSION CONTROL COVER -

(See Index) ----------------------------------Serial Group "B":

9254, 9268, 9285 thru 9289, 9292 thru 9296, 9298, 9301, 9303, 9305 thru 9312, 9314, 9315, 9317 thru 9321, 9323, 9324, 9325, 9327 thru 9353, 9355 thru 9358, 9360, 9363 thru 9376, 9378 thru 9396, 9398 thru 9416, 9418 thru 9493, 9495 thru 9520, 9523, 9525 thru 12183, 1 CA3 l 70 and thereafter and 1 C883 and thereafter

"*NOTE: Output Shaft Parts listed above are for Model 75A only - Refer to page 45 & 46 for Output Shaft Parts for Model 75B & R.


38.2 PM 2726

~ ~

PM 2726

CONSTRUCTION MACHINERY DIVISION -NOTE 5

39

~ mmmmm CONSTRUCTION MACHINERY DIVISION -

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

\)~ \}i~!~\\.\J,,\ltJ)_· I 44 43 42 41 40 39 I

45 46 47 48 49 50 51 52 53 54 55 56 57 I 58

/,\

0~ 0 0 ~C0°lOJ~ oJ' ~:~:~1

I \ t t t It i t \ t \ L \J,i:; 81 80 79 78 77 76 75 ~;

82 83 84 85 86 87 88 89 90 91 I 92 93 94 I 1

: J \ \ 11 o e ,r i , , .-kl t, · • • c_J , i' -:~

125 124123 \. ·'1 , 'll"\ '\ I r-. , \ ~l 122 121 . 120 119 118 I _ ',

• ... · . ..- i\ 126 121 12a 129 130 131 I l .. p Ii t t t l t l l ~,~ ! ~ . ~ _j

\~ t\ r~\~~r\~Jr~\-- l ' •'

164 163 162 161160 159 158 157 156 155 154 153 152 151 l 165 166 167 168 169 170 lrL\ l 175

7JIJO

1

,

/ ~r1,1r11·~~~J, ,, 227 226 225 224 223 222 221 220 219 218 217 216 215 214

TRANSMISSION ASSEMBLY TS-1617

40 PM 2726

~ cmmmm CONSTRUCTION MACHINERY DIVISION

213 212 211 210 209

TRANSMISSION ASSEMBLY

' PM 2726 41

-

TS-1617

~ ~

CONSTRUCTION MACHINERY DIVISION -TRANSMISSION ASSEMBLY Item No.

Part No.

A 281740

1 201951 2 209343 3 100949 4 206864 5 209340' 5A 209341 58 209342 6 220390 -. 7 675544 8 675547 9 209377

10 675547 11 675544 llA 223881 12 220389 13 209369 14 731321 15 731319 16 221401 17 220471 17A 220472 178 220473 17C 221209 18 220469 19 209387 20 222409 20A 222407

208 lOJ-06 21 234038 22 221996 23 221998 24 208773 25 208760 26 223942 27 220468 28 223867 29 224047 30 220391 31 21C-612 32 220398 33 220186 34 216677 35 208776 36 224106 37 lC-718 38 4E-07 39 675548 40 675544 40A 223881


TRANSMISSION ASSY - (R-300FS-5) (Inc. 1 thru 234) -----------------------------

NUT, Input Flange -•----------------------------FLANGE ASSY, Input (Inc. 3) _____________ _

DEFLECTOR, Input Flange -----------------SEAL, Input Shaft Oil -------------------------- l

tSHIM, Bearing Cap - .004" _____________ _ ¢SHIM, Bearing Cap - .007" _____________ _ tSHIM, Bearing Cap - .010" _____________ _

SHAFT, Input -------------------------------------CUP, Input Shaft Bearing --------------------CONE, Input Shaft Bearing _______________ _ GEAR, Input Shaft Reverse (45T) _______ _

CONE;·lnput Shaft Bearing ---------------- l CUP, Input Shaft Bearing -------------------- 1

t RING, Bearing Locating ---------------------- 1 SHAFT, Forward Gear Quill ________________ 1 GEAR, Input Shaft Forward_ (43T) ____ l CONE, Quill Shaft Bearing _______________ 1 CUP, Quill Shaft Bearing _______________ _ GASKET, Clutch Cover _____________________ _

t SHIM, Bearing Cap - .Oq4" _____________ _ t SHIM, Bearing Cap - .007" ____________ _ tSHIM, Bearing Cap - .010'' _____________ _ tSHIM, Bearing Cap - .020" _____________ _

CAP, Clutch Bearing -------------------------- 1 RING, Clutch Drum Sealing -------------- 2 DRUM ASSY, Clutch (Inc. 20A, 20B) __

t HOUSING, Bleed Valve -------------------- l t BALL, Bleed Valve ------------------------------

RING, Piston Inner Sealing ________________ l

PISTON, Clutch ---------------------------------- l DISC, Clutch Outer ______________ _____________ l

DISC, Clutch Outer ---------------------------- 6

PLATE, Clutch Disc End --------------------RING, End Plate Retaining ----------------WASHER, Disc Hub Retaining ___________ _ RING, Hub Washer Locating ______________ 1

RING, Hub Washer Retaining____________ 1

COVER, Clutch -----------------------------------BOLT, Clutch Cover ---------------------------- 10

HUB, Clutch Disc -------------------------------- l SPRING, Clutch Disc Release _____________ 10

DISC, Clutch Inner ------------------------------ 7 RING, Piston Outer Sealing ---------------- l RING, Drum Hub Retaining ________________ l

BOLT, Bearing Ccip ---------------------------- 4 LKWSHR, Bearing Cap ------------------------ 4 CONE, Quill Shaft Bearing ---------------- l CUP, Quill Shaft Bearing -------------------- 1

tRING, Bearing Locating ---------------------- 1

;As Required tNot Illustrated

Item No.

Part No.

41 209339 42 6E-07 43 226862 43A 620-07 44 lF-424 45 223867 46 220398 47 223942 48 208760 49 216677 50 221998 51 221996 52 208776 53 224106 54 222409 54A 222407

54B lOJ-06 55 209387 56 220469 57 220471 57A 220472 57B 220473 57C 221209 58 220934 59 731319 60 731321 61 220389 62 209374 63 675548 64 675544 64A 223881 65 220388 66 675544 66A 223881 67 675547 68 209375 . 69 675547 70 675544 71 209364 72 226862 72A 620-07 73 4E-07 74 209365 74A 209366 74B 209367

75 4E-07 76 lC-718 77 234038

78 208773 79 220186 80 220468


CAP, Input Shaft Bearing _________________ _ LKWSHR, Bearing Cap________________________ 4

STUD, Bearing Cap ---------------------------- 4 t NUT, Bearing Cap ------------------------------ 4

COTIER, Flange Nut --------------------------RING, Hub Washer Locating _____________ _

HUB, Clutch Disc --------------------------------RING, End Plate Retaining _______________ _ PLATE, Clutch Disc End _______________________ _

DISC, Clutch Inner ------------------------------ 7 DISC, Clutch Outer ---------------------------PISTON, Clutch ----------------------------------RING, Piston Outer Sealing _______________ _ RING, Drum. Hub Retaining _______________ _ DRUM ASSY, Clutch (Inc. 54A, 548) __

t HOUSING, Bleed Valve _____________________ _

t BALL, Bleed Valve ------------------------------ l RING, Drum Hub Sealing ------------------ 2 CAP, Clutch Bearing --------------------------

* SHIM, Bearing Cap - .004" _____________ _

t SHIM, Bearng Cap - .007'' --------------t SHIM, Bearing Cap - .010'' _____________ _ t SHIM, Bearing Cap - .020'' ____________ _

CASE ASSY, Transmission ________________ _

CUP, Quill Shaft Bearing -------------------

CONE, Quill Shaft Bearing ---------------SHAFT, l st & 3rd Quill --------------------GEAR, l st & 3rd Drive (29T) _____________ _ CONE, Quill Shaft Bearing ______________ _

CUP, Quill Shaft Bearing --------------------

t RING, Bearing Locating ----------------------SHAFT, 1st & 3rd Drive _____________________ _

CUP, Drive Shaft Bearing--------------------t RING, Bearing Locating _____________________ _

CONE, Drive Shaft Bearing _____________ _ GEAR, l st & 3rd Drop (44T) _______________ _

CONE, Drive1 Shaft Bearing ---------------- l CUP, Drive Shaft Bearing -------------------- 1 CAP, Drive Shaft Bearing -------------------- l

STUD, Bearing Cap ---------------------------- 4 t NUT, Bearing Cap ------------------------------ 4

LKWSHR, Bearing Cap ---------------------- 4 tSHIM, Bearing Cap - .004" _____________ _ tSHIM, Bearing Cap.:.. .007'' _____________ _

tSHIM, Bearing Cap - .010" _____________ _

LKWSHR, Bearing Cap ------------------------ 4 BOLT, Bearing Cap ---------------------------- 4 RING, Piston Inner Sealing ________________ l

DISC, Clutch Outer ---------------------------- 6 SPRING, Clutch Disc Release _____________ 10

WASHER, Disc Hub Retaining ___________ _


42.1 PM 2726

I

I

- CONSTRUCTION MACHINERY DIVISION -.

TRANSMISSION ASSEMBLY (Continued) Item Part No. No.

81 224047

82 226862 82A 620-07 83 4E-07

84 731336 85 711124 86 224031 87 220393 88 654875 89 731336 89A 223951 90 675544 91 675548 92 220389 93 131321 94 731319 95 221401

96 220471 96A 220472 96B 220473

96C 221209

97 209387

98 222409

98A 222407

98B lOJ-06

99 224106

100 208776

101 221996

102~. 221998

103 2T6677

104 208160

105 220398

106 223867

107 220391

108 21C-612

109 224047

110 ·220468

111 223942

112 220186

113 208773

114 234038

115 lC-718

116 ,,4fa07

117 220469

118 209369

119 220395

120 220394

Na. Description Req'cl.

RING, Hub Washer Retaining 1 STUD, Bearing Cap ____________________ ------- 5

t NUT, Bearing Cap ------------------------------ 5 LKWSHR, Bearing Cap ________ ------------ 5 CUP, Drive Shaft Bearing _________ ---------

CONE, Drive Shaft Bearing --------------RING, High Gear Locating _____ ----------

SHAFT, 2nd & 4th Drive ------------------CONE, Drive Shaft Bearing ------------CUP, Drive Shaft Bearing ------------------

t RING, Bearing Locating -------------------CUP, Quill Shaft Tapered Bearing ---CONE, Quill Shaft Tapered Bearing __

SHAFT, 2nd & 4th Quill ---------- --------CONE, Quill Shaft Tapered Bearing __ CUP, Quill Shaft Tapered Bearing GASKET, Clutch Cover ------ ------- - .

+SHIM, Bearing Cap - .004" ------+SHIM, Bearing Cap - .007" -+SHIM, Bearing Cap - .010" - -

+SHIM, Bearing Cap - .020" _

RING, Drum Hub Sealing _ 2

DRUM ASSY, Clutch (Inc. 98A, 988)

tHOUSING, Bleed Valve

tBALL, Bleed Valve ____ _

RING, Drum Hub Retaining .

RING, Piston Outer Sealing _

PISTON, Clutch ___ ---·---- __ ----------

DISC, Clutch Outer ___ . DISC, Clutch Inner ___ _______ _ ______ -··

PLATE, Clutch Disc End

HUB, Clutch Disc __ _

RING, Hub Washer Locating . COVER, Clutch ___________ _____ _

7

SOLT, Clutch Cover __ ___ _ _ ------------ 10

RING, Hub Washer Retaining _ l

WASHER, Disc Hub Retaining 1

RING, End Plate Retaining ------------------ 1 SPRING, Clutch Disc Release _____________ 10 DISC, Clutch Outer ______________ _____________ 6

RING, Piston Inner Sealing --------- -----

SOLT, Bearing Cap ---------------------------- 4

LKWSHR, Bearing Cap ------------------------ 4

CAP, Clutch Bearing -------------------------- 1 GEAR, 2nd & 4th Drive (43T) __________ _

GEAR, 2nd & 4th Low (32T) _____________ _

GEAR, 2nd & 4th High (57T) _____________ _

tAs Required tNot Illustrated

Item Part Na. Na.

121 220513 121A 220514 121B 220515 122 220508 123 209370 124 224047 125 220386 126 220468 127 216677 128 221996 129 224106 130 209387 131 220471 131 A 220472 131B 220473 131C 221209 132 209353

133 220673

134 731319

135 731321

136 220388

137 675544

137A 223881

138 675547

139 675547

140 675544

141 226862

141A 62D-07

142 4E-07

143 209364

144 209365

144A 209366

1448 209367

145 209372

146 675544

146A 223881

147 675548

148 209371

149 220389

150 220669

151 220469

152 4E-07

153 1 C-718

154 222409

No. Description Req'cl.

+SHIM, Bearing Cap - .004" ---·---------+SHIM, Bearing Cap - .007" -------------+SHIM, Bearing Cap - .010" _____________ _

CAP, Drive Shaft Bearing ___________________ _

GASKET, Clutch Cover -------------------- -RING, Hub Washer Retaining ___________ _

COVER, Clutch _____ ------ ------------WASHER, Disc Hub Retaining _____________ _ DISC, Clutch Inner ______________ _____ 7 PISTON, Clutch _______________ _______ 1

RING, Clutch Drum Hub Retaining 1 RING, Drum Hub Sealing _ 2

+SHIM, Bearing Cap - .004" ___________ _ + SHIM, Bearing Cap - .007" ____________ _ +SHIM, Bearing Cap - .010" _________ _ +SHIM, Bearing Cap - .020" ___________ _

GASKET, Oil Pan __ _ ____________ 2

PIPE, Oil Suction CUP, Quill Shaft Bearing __ __ _ ____ _

CONE, Quill Shaft Bearing ______ _

SHAFT, Reverse Drive __________ _

CUP, Drive Shaft Bearing __

t RING, Bearing Locating ___ _

CONE, Drive Shaft Bearing ____________ _

CONE, Drive Shaft Bearing

CUP, Drive Shaft Bearing ______ _

STUD, Bearing Cap _ __ ________ __ _ ______ 4

t NUT, Bearing Cap _________________________ ____ 4

LKWSHR, Bearing Cap ______________________ 4

CAP, Reverse Shaft Bearing ______________ _

t SHIM, Bearing Cap - .004" __________ _

+SHIM, Bearing Cap - .007" ____________ _

+SHIM, Bearing Cap - .010" ____________ _ I '

GEAR, Reverse Idler (52T) __ ____________ 1

CUP, Drive Shaft Bearing _________ 1

t RING, Bearing Locating

CONE, Drive Shaft Bearing _____ :~~~"-------f,;,1-

GEAR, Reverse Shaft Drive (S:4T) ____ .

SHAFT, Drive Gear Quill --------------------SCREEN, Oil _______________________________ _

CAP, Clutch Bearing -------------------------

LKWSHR, Bearing Cap--------------------- 4

BOLT, Bearing Cap --------------------------- 4 DRUM ASSY, Clutch (Inc. 154A,

1548) ------------------------------------- -------

154A 222407 t HOUSING, Bleed Valve ---------------------

1548 lOJ-06 tBALL, Bleed Valve-----------------------------


PM 2726 43.1

CONSTRUCTION MACHINERY DIVISION -TRANSMISSION ASSEMBLY (Continued)

Item No.

Part No.

155 234038

156 208776

157 221998

158 208773

159 220186

160 208760

161 223942

162 220398

163 223867

164 21C-612

165 205928

166 209414

167 100949

168 206864

169 209428

170 713997

171 234650

172 209434

173 209433

174 201566

175 209430

176 lOJ-12

177 201844

178 209431

179 5C-612

180 209432

181 209407

182 209396

183 209409

184 209423 184A 225408

185 800656

186 209673

187 209407

188 209701

188A 209702

1888 209703

189 209692

190 206864

191 201566

192 209403 193 209406


RING, Piston Inner Sealing ---------------

RING, Piston Outer Sealing ---------------

DISC, Clutch Outer ---------------------------

DISC, Clutch Outer ---------------------------- 6

SPRING, Clutch Disc Release -------------- 10

PLATE, Clutch Disc End-----------------------

RING, End Plate Retaining ------------------ 1

HUB, Clutch Disc -------------------------------c f RING, Hub Washer Locating _____________ _

BOLT, Clutch Cover ---------------------------- 16

NUT, Output Flange ---------------------------

FLANGE ASSY, Output (Inc. 167) -----

DEFLECTOR, Output Flange ---------------

SEAL, Bearing Cap Oil ------------------------CAP, Rear Output Shaft Bearing _____ _

BEARING, Rear Output Shaft ___________ _

SEAL, Shift Shaft Oil -------------------------- 1

SHAFT, Rear Output Shaft Shift ________ 1

FORK, Rear Output Shaft Shift _________ _

SCREW, Shift Fork Lock --------------------

HOUSING, Rear Output Shaft __________ _

BALL, Mesh Lock __ ----------------------------

SPRING, Mesh Lock ---------------------------

PLATE, Rear Housing Cover ------------·-

BOLT & LKWSHR, Cover Plate ____________ 6

GASKET, Cover Plate -------------------------

WASHER, Output Shaft Gear Thrust __

GEAR ASSY, Output Shaft High (Inc. Bushing) (29T) __________ ---------------------

HUB, High & Low Shift ------------------ -----

SHAFT ASSY, Output (Inc. 184A) ____ _

tBUSHING, Output Shaft---------------------

GEAR ASSY, Output Shaft Low (Inc. Bushing) (Inc. 186) (55T) _______ _

RING, Low Gear Oil -------------------------

WASHER, Output Shaft Gear Thrust __

;SHIM, Front Bearing Cap - .004" _____ _ ;SHIM, Front Bearing Cap - .007" _____ _

;SHIM, Front Bearing Cap - .010" _____ _

CAP, Output Shaft Front Bearing ______ 1

SEAL, Bearing Cap Oil------------------------ 1

SCREW, Shift Fork Lock ---------------------

FORK, High & Low Shift ----------------------GASKET, Shift Shaft Support ___________ _

tNot lllustroted fAs Required

Item No.

Part No.

194 209405 195 5C-616

196 209404 197 208871

198 lOJ-12

199 40K-04 200 201844 • 201 205928

202 lF-432

203 209414

204 100949

205 226862

205A 62D-07

206 4E-07

207 675544 208 675548 209 525293

210 223780

211 l 3F-12

212 215644

213 5C-616

214 675548 215 675544 216 223881

217 209411

218 4E-07

219 226862

219A 62D-07

220 224069

221 209427

222 209426

223 223925

224 209429 225 6E-07

226 226862

226A 620-07

227 lF-432

228 13F-12

229 16F-08

230 19F-16

231 550803

232 4E-04

233 2C-424 234 62D-04


SUPPORT, High & Low Shift Shaft _____ _

BOLT & LKWSHR, Shift Shaft Support 4

SHAFT, High & Low Shift--------------------SEAL, Shift Shaft Support Oil ___________ _

BALL, Mesh Lock ------------------------------

PLUG, Mesh Lock -------------------------------

SPRING, Mesh Lock ---------------------------

NUT, Output Shaft Flange -----------------

COTTER, Flange Nut --------------------------FLANGE ASSY, Output (Inc. 204) ____ _ 1

DEFLECTOR, Output Flange---------------- 1

STUD, Front Bearing Cap ------------------ 4

tNUT, Front Bearing Cap -------------------- 4 LKWSHR, Front Bearing Cap ______________ 4

CUP, Output Shaft Bearing _______________ _

CONE, Output Shaft Bearing ___________ _

MAGNET, Oil Screen ------------------------ 1 SPRING, Magnet Retaining ________________ 1

PLUG, Drain ----------------------------------------

PAN, Oil --------------------------------------------BOLT & LKWSHR, Oil Pan __________________ 14

CONE, Output Shaft Bearing ____________ 1

CUP, Output Shaft Bearing _______________ _

RING, Bearing Retaining -------------------

SHIM, Output Shaft Housing -------------

LKWSHR, Housing to Case ---------------- 7

STUD, Housing to Case ---------------------- 7

tNUT, Housing to Case ----------------------- 7

RING, Bearing Retaining -------------------- 1 \ HUB, Rear Output Shaft Shift ___________ _

',SHAFT, Rear Output ---------------------------

~ING, Bearing Locating ---------------------

G~SKET, Rear Bearing Cap ---------------

LKWS~R, Rear Bearing Cap---------------- 4

STUD,1i~ar Bearing Cap -------------------- 4

t N~TJ ~_e_oi ,Bearing Cap -------------------- 4

COTTER; !Jange Nut -------------------------- 1 tPLUG, Filler & Breather Hole______________ 2 -

t PLUG, Transmission ----------------------------

t BUSHING, Reducing---------------------------- 1

t LEVER, Control Valve ------------------------ 2

t LKWSHR, Control Lever ---------------------- 2

t BOLT, Control Lever ---------------------------- 2

t NUT,· Control Lever ---------------------------- 2


44.1 Pr-,'I 2726

~ tn'ICtml CONSTRUCTION MACHINERY DIVISION -

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

I \ CJ;a Cl~ Cl 011 -~-\

I ~. I I 28 27 26 25 24 23 22 21 20 19 18 17

TS-2832-P

TRANSMISSION OUTPUT SHAFT - MODEL 758 Item No.

A

Port No.


TRANSMISSION ASSY (Same as 75A Transmission with the exception of Output Shaft Parts listed below)

B 280072 *(T-75B-l) For Serial 6123 thru 6163 ___ _

C 280404

209412

2 205928

3 209413

4 lC-720

5 4E-07

6 675544

7 675548

8 209396

9 209408

10 800656

11 209407

(T-75B-2) For Serial 6164 thru 6270 ___ _

*NOTE: For complete replacement of 280072 use 280404

CAP, Output Shaft Oil -----------------------

NUT, Output Shaft------------------------------

SPACER, Output Shaft Bearing _________ _

BOLT, Bearing Retainer ---------------------- 7

LKWSHR, Bearing Retainer ---------------- 7

CUP, Output Shaft Bearing ----------------

CONE, Output Shaft Bearing ___________ _

GEAR, Output Shaft High (Inc. Bush-ing) (29T) ----------------------------------------

SHAFT, Output ----------------------------------

GEAR, Output Shaft Low (Inc. Bushing & 23) C55D -----------------------------------

w ASHER, Low Gear Thrust _______________ _

12 209701 +SHIM, Bearing Cap-.004" ----------------

:j:As Required

Item No_


No. Req'd.

12A 209702 +SHIM, Bearing Cap -.007" _______________ _

12B 209703 +SHIM, Bearing Cap -.01 O" __

13 4E-07 LKWSHR, Bearing Cap ____ _ _ ___________ 4

14 lC-718 BOLT, Bearing Cap ---------------------------- 4

15 100949 DEFLECTOR, Output Flange ___________ _

16 205928 NUT, 9utput Flange _________________________ _

17 1 F-432 COTIER, Flange Nut --------------------------

18 209414 FLANGE ASSY, Output (Inc. 15) _______ _ ... 19 206864 SEAL, Output Shaft Oil ____________________ _

I

20 209692 CAP, Output Shaft Bearing _______________ _

21 675544 CUP, Output Shaft Bearing -------------=--

CONE, Output ~6~0

aft Bearing ___________ _ . i_~-:},}'~'

22 675548

23 209673 RING, Low 'Gficr Oil --------------------------_ ,,.,,ml!{·J:-

.;Output Shaft Hi & Low Shift _____ _ . -~-24 209409

25 209407 WASHER, High Gear Thrust _____________ _

26 209411 SHIM, Bearing Retainer -------------~-----: __

27 2092n0 RETAINER, Output Shaft Bearing _______ _

28 lF-432 COTTER, Output Shaft Nut _______________ _

PM 2726


45

~ mmm CONSTRUCTION MACHINERY DIVISION -2 3 4 5 6 8 9 10 11 12 13 14 15 16

\ \ J \ ii ·~ 70 co ·--\

I I\ I \ 28 27 26 25 24 23 22 21 20 19 18 17

TS-2833-P

TRANSMISSION OUTPUT SHAFT - MODEL 75R Item No.

A

PMt No.


TRANSMISSION ASSY (Some as 75A Transmission with the exception of Output Shaft Parts listed below)

B 280073 *(T-75R-1) For Serial 7123 thru 7145 ___ _

C 280408 *(T-75R-2) For Serial 7146 thru 7183 ___ _

*NOTE: For complete replacement of 280073 or 280408 use 281740

205928 NUT, Output Shaft ------------------------------

2 l 00949 DEFLECTOR, Output Flange --------------

3 lC-720 BOLT, Bearing Retainer---------------------- 7

4 4E-07 LKWSHR, Bearing Retainer ---------------- 7

5 209411 SHIM, Bearing Retainer ---------------------- 1

6 675544 CUP, Output Shaft Bearing ---------------- 1

7 675548 CONE, Output Shaft Bearing ____________ 1

8 209409 HUB, Output Shaft Hi & Lo Shift _______ _

9 209408 SHAFT, Output -------------------------------- 1

10 800656 GEAR, Output Shaft Low (Inc. Bushing & 11 ) ( 55T) ------------------------------------ l

11 209673 RING, Low Gear Oil ----------------------- 1

12 209701 tSHIM, Bearing Cap -.004" ----------------

;As Required

Item No.

Pent No. Description

No. Req'd.

12A 209702 tSHIM, Bearing Cap -.007" _______________ _

12B 209703 tSHIM, Bearing Cap-.010" _______________ _


14 209413 SPACER, Output Shaft Bearing _________ _

15 205928 NUT, Output Shaft ------------------------------

16 209412 CAP, Output Shaft Rear Oil _____________ _

17 lF-432 COTIER, Output Shaft Nut _______________ _

18 1 C-718 BOLT, Bearing Cap ---------------------------- 4

19 4E-07 LKWSHR, Bearing Cap ---------------------- 4

20 675544 CUP, Output1 Shaft Bearing ----------------

21 675548 CONE, Output Shaft Bearing ___________ _

22 209407 WASHER, low Gear Thrust----------------

23 209396 GEAR, Output Shaft High (Inc. Bush-ing) (29T) ---------------------------------------

24 209407 WASHER, High Gear Thrust --------------

25 209410 RETAINER, Output Shaft Bearing ------

26 206864 SEAL, Output Shaft Oil ---------------------

27 209414 FLANGE ASSY (Inc. 2) -----------------------

28 1 F-432 COTIER, Output Flange Nut _____________ _

WHEN ORDERING PARTS1 ALWAYS STATE MODEL AND SERIAL NO, OF MACHINE

46 PM 2726

r.:rrn-;rn mm:a:mJ

PM 2726


47

"ll l: I\) '-I I\)

2

13 14 15

~f 3 4 5 6 7 8 9 10 11 12

,~~JI '\' Ci, ~ 0

TRANSMISSION CONTROLS - MODEL 75A

18

26

28 27

TS-2613-P

a>'------------------------------------'

I_ n 0 z "' '"4

llD C:

" '"4 -0 z ~ )I,

n :z: -z '" ;1111

-<

tJ -< -"' -0 z

I

CONSTRUCTION MACHINERY DIVISION Bl TRANSMISSION CONTROLS - MODEL 75A Work and Travel, Two and Four Wheel Drive

Item No.


No. Req'd.

550691

8D-06

ROD, Bell Crank to Transmission_______ 1

2 NUT, Ball Joint _ __ __ _ _________ _ 2

3 1301362 BALL JOINT, Rod to Transmission _______ _

4 4E-06 LKWSHR, Ball Joint _______ _ _ ___________ _

5 20-10 NUT, Bell Crank Attaching ______________ _

6 4E-10 LKWSHR, Bell Crank Attaching _____ _

7 550679 ROD, Range - Lever to Bell Crank __ _

8 4F-08127 PIN, Rod to Lever

9 l F-414 COTTER, Clevis Pin

10 2C-868 BOLT, Lever Attaching __ _

Item No.


28 4F-08127 PIN, Rod to Bell Crank_

29 14C-10144 BOLT, Bell Crank Attaching _

30 551496 SLEEVE, Bell Crank _____ _

31 526767 BUSHING, Bell Crank _

32 551494 BELL CRANK, Range ___ _

33 12H-15 FITTING, Bell Crank Grease_

34 lF-414 COTTER, Clevis Pin

35 4F-08127 PIN, Clevis to Bell Crank __

36 2J-8300 CLEVIS, Rod to Bell Crank _

37 8D-08 NUT, Clevis Jam __

No. Req'd.

--- 2

11 616796 WASHER, Lever Attaching __

BUSHING, Lever __

38 550683 ROD, Bell Crank to Transmission ___ _

12 526767

13 550677

14 509772

15 l 2H- l 5

16 550646

17 509772

18 550685

19 12H-15

20 526767

21 616796

22 4E-08

23 20-08

24

25

4F-08127

l F-414

26 550687

27 l F-414

LEVER, Range Shift _

KNOB, Range Lever __

FITTING, Range Lever Grease _______ _

SLEEVE, Lever ___ _ 2

KNOB, 4WD Lever

LEVER, Four Wheel Drive Shift -- l

FITTING, 4WD Shift Lever _______ _

BUSHING, Lever ------------- ____ --

WASHER, Lever Attaching ____ _

LKWSHR, Lever Attaching ____ _

NUT, Lever Attaching ________ ------ ____ _

PIN, Rod to Lever _______ _ _ _________________ _

COTTER, Clevis Pin __

ROD, 4WD - lever to Bell Crank _____ _

COTTER, Clevis Pin _____ _ _________________ _

39 1 F-310 COTTER, Clevis Pin

40 4F-06106 PIN, Rod to Transmission _

41 4E-06 LKWSHR, Ball Joint -- _

42 8D-06 NUT, Ball Joint _____ _

43 550689

44 550646

45 4C-844

46 616796

47 526767

48 12H-15

49 8D-06

50 4E-06

51 20-08

51A 4E-08

BELL CRANK, 4WD _

SLEEVE, Bell Cronk

BOLT, Bell Cronk Attaching ___ _

WASHER, Bell Crank Attaching ___ _

BUSHING, Bell Crank

FITTING, Bell Cronk Grease __

NUT, Ball Joint ____ -

LKWSHR, Ball Joint __

NUT, Bell Cronk Attaching

LKWSHR, Bell Cronk Attaching __

52 1301362 BALL JOINT

53 BD-06 NUT, Ball Joint __ --- ________ _

PM 2726


49

~ tm!Iml CONSTRUCTION MACHINERY DIVISION -

Item No.

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15

\--------4

6

30 7

23 TS-1521-P

TRANSMISSION CONTROLS-WORK AND TRAVEL-758 AND 75R Port No. Description

No. lteq'd.

2C-844 BOLT, Lever Mounting -------------------·---- 1 616796 WASHER, Lever Mounting ------------------ 1 526767 BUSHING, Shift Lever ----------------------- 1 509772 KNOB, Shift Lever ------------------------------ 1 550677 LEVER, Range Shift ---------------------------- 1 12H-15 FITIING, Lever Grease ____ ----------------- 1 550646 SLEEVE, Lever Mounting -------------------- 1 616796 WASHER, Lever Mounting ---------------- 1 2D-08 NUT, Lever Mounting ----------------------- 1 4E-08 LKWSHR, Lever Mounting ---------------- 1 550679 ROD, Range Shift - Upper ---------------- 1 1 F-414 COTIER, Clevis Pin ---------------------------- 1 4F-08127 PIN, Clevis _ ------------------------------------- 1 551496 SLEEVE, Bell Crank Mounting ------------ 1 14C-10144 BOLT, Bell Crank Mounting ------------ 1

Item Port No. No.

16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

526767 12H-15 4F-08127 lF-414 8D-08 lF-310 4F-06106 550683 2J-8300 4E-10 2D-10 526767 551494 lF-414 4F-08127

I

Description No.

leq'd.

BUSHING, Bell Crank ------------------------ 1 FITIING, Bell Crank Grease -------------- 1 Pl N, Clevis ------------------------------------------ 1 COTIER, Clevis Pin ---------------------------- 1 NUT, Clevis Jam ---------------------------------- 1 COTIER, Clevis Pin ---------------------------- 1 PIN, Clevis ------------------------------------------ 1 ROD, Range Shift - Lower ---------------- 1 CLEVIS, Rod to Bell Crank ------------------ 1 LKWSHR, Bell Crank Mounting __________ 1 NUT, Bell Crank Mounting ---------------- 1 BUSHING, Bell Crank ------------------------ 1 BELL CRANK -------------------------------------- 1 COTIER, Clevis Pin ---------------------------- 1 PIN, Clevis ----------------------------------------- 1


50 PM 2726

~ rnrm:ttD

Item No.

35

34

33

32

Part No.

1 2D-04 2 4E-04 3 1301362 4 8D-06 5 2C-424 6 550674 7 8D-06 8 1301362 9 -----

10 550672 11 509772 12 550669 13 18D-05 14 550667 15 550663

16 16A 581978 16B 581979

CONSTRUCTION MACHINERY DIVISION -2 3 4 5 6

23 22 21

I I I I I I

'-"- I "- I

'--.J I

11

12

1"-k W---------15 I I "-I I I I I I I I

"- I I "-"-I I I"-:

I I\ I 1

1

I Ii

~~ ~~' , ...... ,--.,,..r1 : ',( I

'j; 20 19

16

TS-1636-P

GEAR SHIFT LEVERS AND LINKAGE No.

Description Req'd.

NUT, lever Clamp -----------------------------

LKWSHR, lever Clamp-----------------------

BALL SOCKET -------------------------------------NUT, Ball Socket Jam ------------------------ 1 BOLT, Lever Clamp ---------------------------- 1 ROD, Shift ------------------------------------------ 1 NUT, Ball Socket Jam ------------------------ 1 BALL SOCKET -------------------------------------- 1 STEERING GEAR - (See Index) ----------U-BOL T, Shift Lever Attaching ____________ 2

KNOB, Shift levers ----------------------------- 2 PLATE, Shift Lever Attaching ------------- 2 NUT, U-Bolt -------------------------------------- 4 LEVER, High & low Shift ------------------- 1 LEVER, Forward & Reverse Shift _________ _

*SUPPORT, Shift levers --------------------

Male Half --------------------------------------- 2 Female Half --------------------------------------- 2

Item No.

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Part No.

4E-06 8D-06 8D-06 4E-06 1301362 80-06 550674

2C-424 8D-06 4E-06 550803 1301362 4E-04 20-04 8D-06 8D-06 4E-06 550803


LKWSHR, Ball Socket Attaching ________ _ NUT, Ball Socket Attaching ________________ 1 NUT, Ball Socket Attaching _______________ _ LKWSHR, Ball Socket Attaching _________ _

BALL SOCKET --------------------------------------NUT, Ball Socket Jam ______________________ _

ROD, Shift ------------------------------------------TRANSMISSION - (See Index) ________ _

BOLT, Lever Clamp ----------------------------NUT, Ball Socket Attaching _______________ _

LKWSHR, Ball Socket Attaching ________ _

LEVER, Transmission ---------------------------BALL SOCKET ------------------------------------LKWSHR, lever Clamp -----------------------NUT, lever Clamp -----------------------------

NUT, Ball Socket Jam-------------------------NUT, Ball Socket Attaching ----------------LKWSHR, Ball Socket Attaching _________ _

LEVER, Transmission ---------------------------

*NOTE: When 581978 and 581979 Nylon Supports are installed in place of rubber support, 550669 Plate Item 12 is not required.


PM 2726 51

~ mm:tm

1 2


3 4 5 6

\J ' ..., \· .. / c:;s, d iJ C:.. c;;;;> "' -·· . '\

18 17 TRANSMISSION CONTROL COVER

52

-

TS-38 l 6-P-48-55G

PM 2726

r.:rrn!1 b!1!Itttm CONSTRUCTION MACHINERY DIVISION -

Item Part No. No.

A 800657

B 227968

209378

lA l C-718

lB 4E-07

lC 40K-02

2 208812

3 25E-21

4 224095

5 211433

6 208805

7 25K-30016

8 209379

9 209874

10 209380

11 220363

12 208815

13 227874

14 223944

15 25K-30014

16 209878

17 6E-06

18 lC-628

19 227968

20 208809

21 I 208810

21 A l F-208

22 209382

23 227873

24 22394-4

25 208809

26 208810

26A l F-208

27 209382

28 227968

29 209690

30 1 OJ-12

31 203647

tNot Illustrated

TRANSMISSION CONTROL COVER No.

Description Req'd.

COVER ASSY, Control (Inc. 1, 2 thru 31) ---------------------------·----------------- _____________ ·--··

VALVE ASSY, Control (Inc. l O thru 16, 19, 20, 22 thru 25, 27, 28) ------··--···- ____________ _

COVER, Control ___________ ---·-------·-------·------------------------------··-------·---·---------------·---·-------·---·

t BOLT, Cover to Case ---·--·------·-·------·--·------------------------------------------------------------------------ 9

tLKWSHR, Cover to Case ----·-------------------------------------------------------- ----------------------·-------- 9

tPLUG, Control Cover Oil Passage -------------------------------------------------------------------·------------ 5

SEAL, Selector Arm Oil ----------·----·---·--------------·---------------------------------------------------·--·------ 2

WASHER, Selector Arm ----------··--------------------------· --------------------------- ·------------------------·-- 2

RING, Selector Arm Washer Retaining __________ ----·---------·-······-··-------------------·-···-···------ 2

BREATHER, Control Cover ·--·-------------------··-----·---------------·-------·--·----------------··- _ . _________ _

VAL VE, Control Cover Brake Bleeder __________ -·----------------··------------------------------------------

110" RING, Control Cover Oil Passage---·-··-------------·-------------------------------------------------- 5

GASKET, Cover to Case ---------------------------------------·--··---·--··-----· -----------------·-----·-----------·

STOP, Selector Valve Detent Ball ----------·--···-- ---·---··--------------··-----··----------------------------- 2

HOUSING, Control Valve -··-------------------------------·------------------------·-------------·-·····---------

SPRING, Shut-Off Valve _ ---···--·-------·---------------·------·---------·--··-------------------------------------

VAL VE, Shut-Off ---·-----·-···-·-·- --·-· -----·-------··--------------------------- -----·----------------------------------

CUP, Shut-Off Valve Sealing __ -·-·------·---·----··--·-----------------···--·· _____ ------ ··---··----------·-

RI NG, Va Ive Stop Retaining ····--· --··---------------------------------·-·-··----·--------------------------------

110" RING, Shut-Off Valve Stop ---·-···-···--·------------------------ -·-·------ ---------·------------·-----

STOP, Shut-Off Valve -·-·---------------·--·----------------·------ -------------- ---------·-----·-·-·---------------

LKWSHR, Valve to Cover ·-··---··--·-----------·---·----------··------·----·--··-----------·----- .---···-···--·--·-- 4

BOLT, Valve to Cover ----·------------------------·-----------------------------------·---·--------------·------------- 4

VAL VE, Selector - (See B) -------------·-----------------------------·---·------ ----·---· -··- --·---··-----------

PIN, Selector Valve Link ---·-------------------------------------·-------------------------··--·---·--·-··-----------

PIN, Link to Arm -----------·---------------------------------------------------·-----------··-----------------------------

tCOTTER, Clevis Pin ..... ··--·----·---------···--------------------------·---------------------- ·-····--·--------··------1

LINK, Valve to Arm __________ -------------------------------- ------------·--··-------------------------··· ··---·-----···

GU I DE, Va Ive Spring -------·--·----------·-----------------------------------------------·-·-···--· --·-··-·------------

. RING, Spring Retaining -------------------·---------------------------------------------------------····--------------

PIN, Selector Valve Link ·-------------··---·-·-·-···-··---------------------'----·-·------·------···-------

p I N, Link to Arm ---------------·------·-· ---- ----_ ------------------·--------------------------.. ______ .. -... __ .. -· -· .. --..

t COTTER, Clevis Pin ---------------------------------·-·---------------------------· ---------·---------·--·------·-· _____ _

LINK, Valve to Arm ------------------------·--------------------------------------------------------·-----··--·----------

VAL VE, Selector - (See B) -------------------------------------------------·---------··--·-·-·-- --·-·- ··- -------

ARM, Selector -------------------------------------- ------------------------------------·--------------·-·--------------···- 2

BALL, Selector Valve Detent -----------·--------------------------------------··-----------------------·--··-------- 2

SPRING, Selector Valve Detent Ball -------------------·-·-------·-----------·-·-- .---·-···---··· . --·-···---. 2


PM 2726 53.1

~ rmtttm

1

CONSTRUCTION MACHINERY DIVISION -I

(

7

~----·

11 11

TRANSMISSION CONTROL COVER TS-3816-P-48-55G

54 PM 2726

- '

Item No.

A

B

lA

2

3

4

5

6

7

8

9

10

lOA

11

12

13

14

Part No.

225854

227872

220957

l 3F- l 2

208812

25E-21

224095

211433

208805 25K-30016

209379

209874

16F-02

220363

227874

223944

CONSTRUCTION MACHINERY DIVISION II TRANSMISSION CONTROL COVER

Description

COVER ASSY, Control (Inc. l thru 35) ------------------------------------------------------------------------

VAL VE ASSY, Selector Control (Inc. 10 thru 16, 19, 20, 22 thru 25, 27, 28) _____________ _

CO VER, Con tro I ---------------------------------------------------------------------------------------------------------

t l'L UG, Con tro I Cover --------------------------------------------------------------------------------------------------

SEAL, Selector Arm Shaft Oil -------------------------------------------------------------------------------------

WASHER, Selector Arm Shaft Sea I -----------------------------------------------------------------------------

RING, Selector Arm Shaft Washer Retaining -------------------------------------------------------------

BREATHER, Control Cover ------------------------------------------------------------------------------------------

VAL VE, Bleeder -----------------------------------------------------------------------------------------------------------

110'' RING, Oil Passage -----------------------------------------------------------------------------------------------

GASKET, Cover to Case ----------------------------------------------------------------------------------------------

STOP, Selector Valve Detent Ball --------------------------------------------------------------------------------

R

§HOUSING, Selector Valve - See 11811

------------------------------------------------------------------------ -

t PLUG, Selector Va Ive --------------------------------------------------------------------------------------------------

SPRING, Shut-Off Valve ----------------------------------------------------------------------------------------------

15 25K-30014

§ V Al VE, Shut-Off - See 11811 ---------------------------------------------------------------------------------------

CUP, Shut-Off Valve Sealing -------------------------------------------------------------------------------------

RING, Shut-Off Va Ive Stop Reta in ing ------------------------------------------------------------------------

110" RING, Shut-Off Valve Stop --------------------------------------------------------------------------------

16 209878

17 4E-06

18 lC-626

19

20 208809

21 208810

21A l F-208

22 209382

23 227873

24 223944

25 208809

26 208810

26A l F-208

27 209382

28

29 209690

30 1 OJ-12

31 203647

32 40K-02

33 220947

34 lC-718

35 4E-07

t Not Ill ustroted §Not Sold Seporately

STOP, Shut-Off Va Ive ------------------------------------------------------------ ___ -----------------------------------

LKWSH R, Valve to Cover Bolt ------------------------------------------------------------------------------------

BOLT, Va Ive to Cover ____________ ------------------------------------------------ --------------------------------------

§ V Al VE, Selector - See 11811 ---------------------------- -----------------------------------------------------------

PIN, Selector Valve· Link -----------------------------------------------------------------------------------"---------

PIN, Selector Valve Link Clevis --------------------------------------------------------------'.--------------------

tCOTIER, C!evis Pin ------------------------------------------------------------------------------------------------------

LINK, Selector Va Ive ______________ ----------------------------------------------- --------------------------------------

GU IDE, Valve Spring----------------------------------------------------------------------------------------------------' RING, Shut-Off Valve Spring Retainer ------------------------------------------------------------------------

p IN, Selector Va Ive Link ________ --------------------------------------------------------------------------------------

Pl N, Selector Valve Link Clevis ------------------------------------------------------------------------------------

t CO TIER, Clevis Pin ------------------------------------- - -------------------------------------------------------------

LINK, Selector Va Ive ------------------- · -------------------------------------------------------------------------------

§VALVE, Selector - See 11811

----------------------------------------------------- _ ----------------------------------

SHAFT ASSY, Selector ------------------------------------------------------------------------------------------------

BALL, Selector Va Ive Detent ----------------------------------------------------------------------------------------

5 PRING, Se I ecto r Va Ive De tent ----------------------------------------------------------------------------------

t PLUG, Contro I Cover Oil Passage ----------------------------------------------------------------------------

t BAFF LE, 0 ii -----------------------------------------------------------------------------------------------------------------

t BOLT, Control Cover to Case ----------------------------------------------------------------------------------

t LKWS HR, Control Cover to Case ------------------------------------------------------------------------------


PM 2726 55.1

CJ1 m

5

I 6 7 8 9 10.. II I 13

14

43 42 -41 40 39 38 37 36 35

34

~~o4M-1 I I I I

3o I

I n 0 2: VI .... :ii,

C: n .... 0 2:

--------------------------------- I I I I I I t I 46 47 48 4

1

9

L-~r'~6qJ. ' 85 84 83 82

51 55

I ,J.., / so 1r1 52 53 V 1 .. ,~ ~ .. I 54 1

, ··s;etTi'c\. r=-1 ·, Y Y

81 80 79 78 77 76 15 14

TORQUE CONVERTER ASSEMBLY

t-se 51-c.,

1-59 56-f

0 -< 61 62 63 64 65 -Qltl(o~j··,-66 ii 11

VI -0 2:

71 70 69 68 67

TS-3608-P-83-56 I

---- -- -------~ -- ------ -

~ mzm:tD CONSTRUCTION MACHINERY DIVISION -TORQUE CONVERTER ASSEMBLY

MODEL Column 1 for Serial Column 2 for Serial

Item No.

A

75A

75B

7!iR

8123 thru 8348, 8351, 8352, 8356, 8364 thru 8367, 8458 and 8461

6123 thru 6139

7123 thru 7144

Description

8349,8350, 8353,8354, 8355, 8357 thru 8363, 8368 thru 8430, 8432 thru 8457, 8459, 8460, 8462 thru 8476, 8481 and 8483

No. Req'd.

CONVERTER ASSY (Inc. l, 2 thru 88)

GEAR, Converter Drive

l A BOLT, Drive Gear to Flywheel 8

8

30

l B WASHER, Drive Gear to Flywheel .

2 BOLT, Impeller to Drive Disc ...

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

DISC, Converter Drive

BEARING, Drive Disc Hub

TURBINE, Converter

HUB, Turbine

RING, Thrust Washer Retaining . _

WASHER, End Plate Thrust

SPRING, Sprag

MEMBER, Reaction

WASHER, End Plate Thrust .

RING, Hub Bearing Retaining __

BEARING, Impeller Hub

2

"O" RING, Impeller to Hub 1

IMPELLER, Converter .

WASHER, Impeller to Drive Disc...... .. __ 30

LKWSHR, Impeller to Dri-re Disc .. . ........... 30

NUT, Impeller to Drive Disc .. . ....... 30

WASHER, Impeller to Hub . ............... 6

BOLT, Impeller to Hub..................... .............. 6

21 "O" RING, Converter Support .......................... .

22 §SEAT, Pressure Relief Ball ....... ..... ........... ...... 1

Column 3 for Serial

8431, 8477 thru 8460, 8482, 8484 thru 9484, 9519 thru 9532

6140 thru 6175

7145 thru 7150

1 (C-75-1)

2 (C-75-2)

Column 4 for Serial

9485 thru 9518, 9533 thru l 0222, 10240 and 10247 thru 10251

6176 thru 6200

7151 thru7154

3 (C-75-3)

4 (C-75-6)

See Note "A" See Note "A" See Note "A" 280101

See Note "B" See Note "B" See Note "B" 233089

233092

215909

2C-618

See Note "B" See Note "B" See Note "B" 220483

223358

*800949

209688

224028

209319

209948

209321

209320

223859

223358

25K-40508

209311

619023

6E-06

20-06

619023

209313

25K-40600

SEE 87

*800949

209688

209332

209333

209332

209333

NOTE "A": For complete replacement of converter listed in columns 1, 2 and 3 use 280101 converter plus perts listed below. drive gear bolt circle on present flywheel is l 3Vs" flywheel does not hove to be changed.

l - 941318 FLYWHEEL (Gos powered) 8 - 233092 BOLT, Drive Gear to Flywheel 1 - 941319 FLYWHEEL (Diesel powered) 8- 215909 WASHER, Drive Gear to Flywheel "

NOTE "B": Use 940548 Kit for Gos Powered end 940549 Kit for Diesel Powered Units. These kits include necessary parts to can vert converter disc, converter drive end driven gears end flywheel to latest design identified by 13\!s" bolt circle on converter drive gear After conversion has been mode use column 4 when subsequent replacement of these items ore required.

• NOTE: 800949 Turbine Kit includes 1 - 209332 Turbine, 1 - 209333 Hub, 6 - 619023 Washer and 6 - 209313 Bolt. For sub sequent replacement of these perts use column 4.

§Not Sold Sepcrctely


PM 2726 57.1

r.:rrrr;rn mrc:tm CONSTRUCTION MACHINERY DIVISION

TORQUE CONVERTER ASSEMBLY (Continued)

Item No. Description

SPRING, Pressure Relief -------------------------------------

PLUG, Oil Cooler Line .. -------------------------------------

SEAL, Cooler Line Plug _____________ ---------------------

BALL, Pressure Relief __________ _

§HOUSING, Converter ______________ __ _ __________________ _

No. Req'd.

23

24

25

26

27

28

29

30

31

32

33

34

35

LKWSHR, Support to Housing __________ _______________ _ 6

BOLT, Support to Housing ______ _ ------------------------ 6

PLUG, Filler _________________ -------------------------------------

SUPPORT, Converter -----------------------------------------

RING, Support Oil ---------------------------------------------

SEAL, Support Oil ----------------------------------------------

110" RING, Impeller to Drive Disc----------------------

HUB, Impeller __________ ----------------------------------------

36 RING, Hub Bearing Locating ------------------------------

37 RING, End Plate Retaining --------------------------------

38 PLATE ASSY, Overunning Clutch End (Inc. Bushing) --------------------------------------------------

39 RACE, Overrunning Clutch Outer --------------------

40 CLUTCH ASSY, Overrunning (Inc. 9) ------------------

41 PLATE ASSY, Overrunning Clutch End (Inc. Bushing) --------------------------------------------------

42 RING, End Plate Retaining ________ ----------------------- l

43 RING, Turbine Hub Retaining ---------------------------- 2

44 WASHER, Turbine to Hub ---------------------------------- 6

45 BOLT, Turbine to Hub ---------------------------------------- 6

46 SHAFT, Main Gear Drive (Inc. 49A, 498) _________ _

47 RING, Bearing Retaining _____ ----------------- -------------

48 +RING, Bearing locating (.088 to .090) --------------

48A +RING, Bearing Locating (.091 to .093) _____________ _

486 +RING, Bearing Locating (.094 to .096) --------------

48C +RING, Bearing Locating (.097 to .099) --------------

49 NUT, Main Drive Gear ----------------------------------------

49A NUT, Main Drive Gear---------------------------------------- 1

498 tWASHER, Main Drive Gear ------------------------------ l

50 RING, Pump Shaft Sealing --------------------------------

51

52

53

"0" RING, Converter Pump -----------------------------

GASKET, Converter Pump ---------------------------------

GEAR, Output Shaft ------------------------------------------

tNot Illustrated tAs Required §Not Sold Separately

1 (C-75-1)

209188

208783

221023

l OJ-16

SEE 87

6E-08

2C-820

l 3F- l 2

220706

209307

209778

214939

209775

224075

223860

209316

209315

209314

209316

223860

224033

619023

209313

800968

224043

223947

223948

223949

223950

2 (C-75-2)

209775

3 (C-75-3)

209782

207949 For use with 224091 Shaft



209781

25K-30020

220701

209336

-4

(C-75-6)

209782


58 PM 2726

~ rnmm CONSTRUCTION MACHINERY DIVISION

TORQUE CONVERTER ASSEMBLY (Continued)

Jtem No. Description

NOi. Req'd.

54

55

"O" RING, Oil Tube ·-- __________ ___ _______ _______________ 2

TUBE, Cover to Cose Oil ______ -----------------------------56 VAL VE, Pressure Regulator ______________ _ ____________ _

57 SEAL, Pressure Regulotor Plug _ --------------------------

58 PLUG, Pressure Regulotor ----------------------------------

59 SPRING, Pressure Regulator ----·------------------------- 1

60 STUD, Moin Pump Mounting ------------------------------ 6

61 +SHIM, Seering Cap (.004) ----------------------------------

61 A +SHIM, Beoring Cop (.007) ----------------------------------

61 B +SHIM, Seo ring Cap (.010) ----------------------------------

62 CAP, Output Shaft Bearing ------------------------------

63 SEAL, Output Shaft Oil ------------------------------------

64 DEFLECTOR, Output Flange ------------------------------

65 FLANGE ASSY, Output (Inc. 64) ------------------------

66 COTIER, Flange Nut -----------------------------------------67 NUT, Output Shaft Flange ______________________________ _

68 BOLT, Bearing Cap -------------------------------------------- 4

69 LKWSHR, Bearing Cap -------------------------------------- 4

70 BOLT, Cover to Housing ------------------------------------ 12

71 LKWSHR, Cover to Housing -------------------------------- 12

72 §COVER, Housing ------------------------------------------------

73 110" RING, Cover ------------------------------------------------ 1

7 4 CUP, Output Shaft Bearing -------------------------------- l

7 4A CONE, Output Shaft Bearing ----------------------------

75 SPACER, Output Shaft Gear ----------------------------

76 SHAFT, Output ______________ -----------------------------------

77 CUP, Output Shaft Bearing --------------------------------

77 A CONE, Output Shaft Bearing ----------------------------

78 GASKET, Converter Pump -------------------------------- 2 79 PUMP ASSY, Converter (Inc. 51, 52, 78) ___________ _

80 LKWSHR, Pump to Cover ------------------------------------ 6

81 BOLT, Pump to Cover ---------------------------------------- 6

82 SHAFT, Oil Pump -------------------- --------------------------

83 GEAR, Main Drive _______ -------------------------------------

84 BEARING, Main Drive Gear ------------------------------ l

85 RING, Drive Gear Shaft Oil -------------------------------- 1

86 PLUG, Drain - Magnetic ------------------------------------

87 HOUSING & COVER ASSY (Inc. 22, 27, 70, 71, 72) -- --- --- ---------------------------------------------------- 1

88 tDOWEL, Housing ta Cover -------------------------------- l

89 tBOLT, Converter to Flywheel Housing ________________ 12

90 tLKWSHR, Converter to Flywheel Housing __________ 12

tAs Required tNot Illustrated §Not Sold Separately

1 2 (C-75- l l {C-75-2)

25K-30016 25K-300l 8

209338 209869

209815

209818

209817

209816

205096

209340

209341

209342

209339

206864

100949

209343

1 F-432

201951

lC-720

4E-07

lC-720

4E-07

SEE 87

209294

675544

675547

209337

209334

675544 675547

220699

940384

6E-06

lC-636

209779

220492 658016

209304 215757

800655

102381

lC-620

4E-06

3 (C-75-3)

25K-30018

209869

-4

(C-75-6)

25K-·30018

209869


PM 2726 59

a, 0

3 4 5 6 7 8 9 10 II 12 13 14

31

l 23 __ ,--25

22_;.-26

,.... - ., ~~[l!'ti··· I

I I I

29 I I I

----- -- --- --- --- --- ----- --- - --- - - - ----------- ---- __ J

60 61 62

57 58 59 \...Li~ ) i \ f63 I

s1 s2 s3 54 J I • -- -,

10, 108 101 1013

::r· 71 1-75

••~IC{~;;

i6i:(~ €:~ 79

~ "2 83 84 85 86 67

~.~----~1u1~i1 "UQ6 Off; Y 11 88

· ,, 97 \,., 91 90 89

64

" 0 :z "' .... ;IQ

C:

" ... -0 :z

-

-< -"' -0 :z

100 99 98 93 92

~ TORQUE CONVERTER ASSEMBLY TS-3609-P-87-56 I mL-----------------------------------------------'

CONSTRUCTION MACHINERY DIVISION -TORQUE CONVERTER ASSEMBLY For Serial: 75A GAS - 10223 thru 10239, 10241 thru 10246, 10252 thru 12183, 1 CA3170 thru 1 CA3418

75A DIESEL - 10223D thru 12183D, 1 CB893 thru 1 CB968 758 - 6201 thru 6270 75R - 7155 thru 7183

No. Item No.


A 280453

233089

CONVERTER ASSY, C-303-1 (Inc. 1, 2 thru 116)

GEAR, Converter Drive

1 A 233092 tBOL T, Drive Gear to Flywheel

l B 215909 tWASHER, Drive Gear to Flywheel

2 2C-618 BOLT, Impeller to Drive Disc

3 220483 DISC, Converter Drive

4 223358

5 220507

6 220493

7 224028

8 209319

9 209948

10 220488

11 209320

12 223859

13 223358

BEARING, Drive Disc

TURBINE, Converter

HUB, Turbine

RING, Washer Retaining


SPRING, Sprag Group

MEMBER, Converter Reaction


RING, Impeller Hub Bearing Ret.

BEARING, Impeller Hub

14 25K-40508 "O" RING, Impeller Hub

15 209311

16 619023

17 6E-06

18 2D-06

19 619023

20 209313

IMPELLER, Converter

WASHER, Impeller to Drive Disc

LKWSHR, Impeller to Drive Disc

NUT, Impeller to Drive Disc

WASHER, Impeller to Hub

BOLT, Impeller to Hub

21 25K-40600 "O" RING, Converter Support

22 208788 SEAT, By-Pass Ball

SPRING, Pressure Relief

FITTING, By-Pass

SEAL, By-Pass Fitting .

BALL, Pressure Relief .

8

8

30

2

30

30

30

6

6

23 209188

24 220847

25 221023

26 lOJ-16

27 6E-08

28 2C-820

29 222344

LKWSHR, Support to Housing ... 6

BOLT, Support to Housing .. ____ 6

HOUSING ASSY, Converter (Inc. 22)

29A 221007 tCOVER, Housing Inspection

29B lC-406 tBOLT, Housing Cover Attaching _

tNot Illustrated

2

4

No. Item No.


29C 4E-04 tLKWSHR, Housing Cover Attaching 4

29E 1 C-620 tBOLT, Housing to Flywheel Housing 12

29F 4E-06 tLKWSHR, Housing to Flywheel Hsg. 12

30 215757

31 220706

32 209307

33 209778

34 214939

35 209782

36 224075

37 223967

38 220480

39 220479

40 221947

PLUG, Drain - Magnetic

SUPPORT, Converter

RING, Converter Support Oil

SEAL, Converter Support Oil

"O" RING, Impeller to Drive Disc

HUB, Impeller

RING, Impeller Hub Bearing Locating

RING, End Plate Retaining

PLATE ASSY, Overrunning Clutch End (Inc. Bushing)

OUTER RACE, Overrunning Clutch

CLUTCH ASSY, Overrunning (Inc. 9)

41 220480 PLATE ASSY, Overrunning Clutch End (Inc. Bushing)

42 223967 RING, End Plate Retaining

43 224033 RING, Turbine Hub Retaining 2

44 619023

45 209313

46 221073

47 209304

48 658016

49 220492

50 221074

51 209779

52 209781

53 209336

54 209337

55 223863

56 743458

57 223981

58 860668

59 220987

WASHER, Turbine to Hub

BOLT, Turbine to Hub

SHAFT, Main Drive Gear

RING, Main Drive Shaft Oil _

BEARING, Main Drive Gear _

GEAR, Main Drive (33T)

NUT, Main Drive Gear Retaining _

SHAFT, Oil Pump _ __

RING, Oil Pump Shaft Sealing .

GEAR, Output Shaft __

SPACER, Output Shaft Gear _

RING, Hub Bearing Retaining

BEARING, Drive Gear Hub

RING, Hub Bearing Retaining .

BEARING, Driven Gear Hub _

HUB, Pump Driven Gear .

60 25K-30018 "O" RING, Oil Cross Over Tube __

8

8

PM 2726


61.1

---------------------------~~~--~~---

~ mmm CONSTRUCTION MACHINERY DIVISION -TORQUE CONVERTER ASSEMBLY (Continued) Item No.

Part No.

61 209869


TUBE, Oil Cross Over --------------------------

62 25K-30018 "0" RING, Oil Cross Over Tube _______ _

63 221082 GEAR, Oil Pump Driven __________________ _

64 221072 COVER, Converter Housing _______________ -

65 860668 BEARING, Driven Gear Hub ____________ _

66 223981 RING, Hub Bearing Retaining ___________ _

67 .223863 RING, Hub Bearing Retaining ___________ _

68 221084 HOSE, Pump to Valve------------------- __ _

69 220978 GASKET, Valve to Converter ___________ _

70 58K-210 "O" RING, Valve to Converter _________ _

71 660178

72 220981

73 220983

PIN, Piston Stop Retaining _______________ _

SPRING, Regulator Valve-Outer _____ _

STOP, Regulator Valve ___________ _

7 4 25K-30018 "0" RING, Valve Stop _________________ _

75 220982 SPRING, Regulator Valve-Inner _______ _

7 6 801067 VAL VE ASSY, Pressure Regulator (Inc. 69 thru 7 5, 79 thru 82) ________________ _

77 1 C-820 SOLT, Valve to Converter-Short ______ 2

77 A 1 C-840 SOLT, Valve to Converter-Long _______ _

78 4E-08 LKWSHR, Valve to Converter ____________ 3

79 660178 PIN, Piston Stop Retaining _________________ _

80 §PISTON, Valve - See 76 _ _ _ __ __ _

81 220983 STOP, Regulator Valve ___________________ _

82 25K-30018 "O" RING, Valve Stop ---------------------


84 206864 SEAL, Output Shaft Oil ______________ ______ 1

85 100949

86 209343

87 201951

DEFLECTOR, Output Flange ______________ 1

FLANGE ASSY, Output (Inc. 85) _______ 1

NUT, Output Shaft Flange__________________ 1

88 1 F-432 COTTER, Flange Nut --------------------------

89 1 C-720 BOLT, Bearing Cap ---------------------------- 4

90 4E-07 LKWSHR, Bearing Cap ------------"--------- 4

91 SHIM, Output Shaft Bearing Cap

91A 221077 *SHIM - .004" -----------------------------------

91 B 221078 *SHIM - .007" __________ -----------------------

91 C 221079 *SHIM - .010" ------------------------------------

§Not Sold Separately tNot Illustrated +As Required

Item No.

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106

107

Part No.

551906

743458

207647

223981

860668

1 C-720

4E-07

209294

221080

221082

220987

860668

223981

221081

675544

107A 675547

108 209334

109 675544

109A 675547

110 221075

111

11 lA 223947

111 B 223948

11 lC 223949

111 D 223950

112 224043

113 220979

114 221083

115 659041

116 89F-7

117 800880

118 800881


CONVERTER PUMP - See Index ___

GASKET, Pump to Converter _____

BEARING, Drive Gear Hub _______

STUD, Pump to Converter ______ 6

RING, Hub Bearing Retaining ____________

BEARING, Driven Gear Hub __

SOLT, Cover to Housing _____ 12

LKWSHR, Cover to Housing ___ 12

"O" RING, Cover to Housing _

GEAR, Pump Drive (46T) ___________

GEAR, Pump Driven (43n ______

HUB, Pump Driven Gear ___ _

BEARING, Driven Gear Hub __

RING, Hub Bearing Retaining __

HUB, Pump Drive Gear ___________

CUP, Output Shaft Bearing _____

CONE, Output Shaft Bearing __

SHAFT, Output _________ _ _____________

CUP, Output Shaft Bearing ______ .

CONE, Output Shaft Bearing ______ __

WASHER, Main Drive Gear Nut ______

RING, M. D. Gear Bearing Locating

*RING - .088 to .090 _____

*RING - .091 to .093 _______

*RING - .094 to .096 ___

*RING - .097 to .099 _________

tRING, M. D. Gear Bearing Retaining _

tDOWEL, Cover to Housing _________

tSPACER, Drive Gear Bearing ____________

tRING, Oil Pump Shaft Retaining _____

tCONNECTOR, Hydraulic Tube ____

HOUSING & COVER ASSY (Inc. 22, 29, 64, 98, 99, 100, 113) --------------

MEMBER & RACE ASSY (Inc. 10, 37,

38, 39) ·····················----·-······--·-······--


62.1 PM 2726

~ rmmm

PM 2726


63

~ ~

87


REAR VIEW OF CONVERTER----------

TORQUE CONVERTER ASSEMBLY - 75A

64

Ill 8

39

40

49

50

51

52

53

54

55

56

57

58

59

63

64

65

66

67

68

69

70

TS-1566-P

PM 2726

I

I

r.:rr:rn m?J:C:tt:tl CONSTRUCTION MACHINERY DIVISION -Item

No.

A

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

33 34 35 36 37

38 39 40 41 42 43 1

44 45 46 47 48 49

TORQUE CONVERTER ASSEMBLY - 75A For Serial: GAS-1 CA3419 and thereafter; DIESEL-1 CB969 and thereafter

Part No.

281022


CONVERTER ASSY (C-272-2) (Inc. 3, 5 thru 96) ..... ·············------------

FLYWHEEL, Engine . . ..... ·-· ...... . 233092 BOLT, Drive Gear to Flywheel ····--····-·· 8 215264 *GEAR, Converter Drive ····-·---·········-· 1 21 5909 WASH ER, Drive Gear to Flywheel.. 8 1 C-616 BOLT, Impeller to Drive Disc ......... . 24 4E-06 LKWSHR, Impeller to Drive Disc .. . 24 214939 "O" RING, Impeller to Drive Disc 1 7 43035 RING, Reaction Member Retaining . 801607 MEMBER, Reaction .. . . ............... . 214920 IMPELLER __ ................. . 1 C-620 BOLT, Converter to Engine ......... . 4E-06 LKWSHR, Converter to Engine ......... . 658244 PIN, Spocer to Reaction Member Lock 220725 PLATE, Nome . . ...... . 214934 SPACER, Reaction Member ... 207873 SCREW, Nome Plate Drive . 214953 RING, Hub Bearing Retaining . 214596 BEARING, Impeller Hub 25E-19 WASHER, Hub to Impeller Bolt . 4C-714 BOLT, Hub to Impeller 214941 SEAL, Oil Baffle 711298 RING, Gear Retaining 214931 GEAR, Pump Drive (39T).

1 12 12

1 2

8 8 1 3 3

214928 SHAFT, Pump Drive . . ...... ·-··· 3 214936 BEARING, Pump Drive Shaft... 3 40K-02 PLUG, Volve Housing 2 214930 SPACER, Pump Shaft....... .. ····-··· 3 214946 SEAT, Safety Valve .... 222318 PLUNGER, Sofety Valve ...... . 222312 SPRING, Safety Volve ... ····--··-····· 25K-40104 "O" RING, Valve to Converter ····-·····

lC-616 4E-06 214949

13F-l 6

214954 214956 224039 214961 8D-06 207647

214929

REGULATOR VAL VE ASSY (Same as Item 37) .. ····--·····-

BOLT, Valve Body .. ·-······· . ····-·-····· 4 LKWSHR, Valve Body ........ 4 GASKET, Volve to Converter -· ........ 1 SHAFT, Output (See 67) .................. . VAL VE ASSY, Pressure Regulator

(See Index) ... ···-····-····-· PAD, Steering Pump Mounting --····· PAD, Main Pump Mounting PLUG, Pipe ........ . ...... . ·····---···-· 4 PUMP, Conv. Charging (See lnde_x) ... RING, Bearing Retaining ........... ·-··· 3 BEARING, Shaft 3 RING, Bearing Retaining . SLEEVE, Pump Drive Adapter .. NUT, Pump Stud . . ...................... . STUD, Pump ..... . . .......................... . PUMP, Conv. Charging (See Index) ... .

3 1 6 6

WASHER, Pump Shaft ···········-············ 3

Item No.

Part No.


50 51 52 53 54 55 56 57 58 59 60 61

713186 4E-06 551906 214953 742002 224026

RING, Wosher Retaining _ LKWSHR, Pump Stud . GASKET, Pump Mounting RING, Bearing Retaining . BEARING, Turbine Shaft . RING, Gear Retaining

§SLEEVE, Stator Support (See 58) ... 222079 RING, Turbine Shaft Sealing 214932 SUPPORT ASSY (Inc. 56) ... 214935 GEAR, Turbine Shaft .......... . 25K-40512 "O" RING, Bearing Retainer . 235091 RETAINER, Bearing

62 214940 FLANGE, Companion . 63 206864 SEAL, Oil 64 1027 45 WASHER, Output Shaft 65 25K-40112 "O" RING, Companion Flange 66 1 F-424 COTTER, Output Shaft . 67 214937 SHAFT, Output ........ . 68 201951 NUT, Output Shaft 69 7 43439 BEARING, Output Shaft Rear ..

3 6

70 223901 RING, Bearing Retaining 1 71 1 C-720 BOLT, Bearing Retainer .......... 3 71 A 214730 STUD, Bearing Retainer .. 2 71 B 8D-07 NUT, Bearing Retainer 2 72 4E-07 LKWSHR, Bearing Retainer . .. 5 73 214938 GEAR, Output Shaft ............ . 7 4 235057 BEARING, Output Shaft Front . 75 214955 RING, Bearing Retaining . ........ l 76 3C-820 BOLT, Support ...... .. ...... ..... 6 77 224009 RING, Gear Retaining .. .. .... ....... 1 78 214951 GEAR, Impeller Hub (41-T). ........... 1 79 221653 RING, Sealing ....... .. .......... .. 1 80 214925 BAFFLE, Oil ........... ..... l 81 1 C-628 BOLT, Oil Baffle ......... ... .... 3 82 4E-06 LKWSHR, Oil Baffle . . 3 83 214939 "O" RING, Oil Baffle .................... .. 1 84 25K-406 l 6 "O" RING, Impeller Hub . ............ .... 1 85 214923 HUB, Impeller .... .. . .. .. . ..... .. 1 86 801546 HOUSING, Converter . .......... ........ l 86A 14F-08 tPLUG, Pipe .. ........ ........ l 86B 40K-02 tPLUG, Pipe .. . .......... .. ........ l 86C l 3F-20 tPLUG, Pipe . . . ....... ................ 1

87 222684 TURBINE ............ ·························-··--· 1 88 214922 **DISC, Converter Drive......... ........ ... l 89 619023 WASHER, Turbine Hub Bolt ······-······· 8 90 209313 BOLT, Turbine to Hub .... ··-··. ........ 8 91 214924 HUB, Turbine ............. --··-····-· ....... 1 92 666542 RING, Bearing Retaining .. . ........... . 93 222006 SLEEVE ............. . -- ............ .

94 214933 SHAFT, Turbine . ..... .... ·······-·-···-·---95 214988 BEARING, Impeller Cover - ·--·---··-·----96 659065 RING, Turbine Hub Retaining ·········--- 2

§ Not Sold Separately tNot Illustrated . . f 1 2

3321

5 B & T g 16 233092 *NOTE: For replacement use 801780 Kit which consists of 1-233215 Bag & Tag Assy. con_s1sting o : - _ag a .' ·

Self Locking Screw, 16-215909 Washer, 1-233089 Flywheel Coupling Gear, 1-28H-18990 Lockw1re, _1-801806 Instruction Drawing. **NOTE: For replacement use 801524 Kit, which consists of 1-234503 Cover & 1-222006 Bushing.


PM 2726 65.3

r.:nrr;n Dlt!Ittmil CONSTRUCTION MACHINERY DIVISION -

7 8 9 10 11

12

2

1

0 14

15

TS-1534-P

PRESSURE REGULATOR VAL VE ASSEMBLY For Serial: GAS-1 CA3419 and thereafter; DIESEL-1 CB969 and thereafter

Item Na.

Part Na. Description

A 801548 VAL VE ASSY, Pressure Regulator

660178

2 220983

(Inc. 1 thru 3, 6, 8 thru 16) ...... .

PIN, Piston Stop ·------

STOP, Piston _

3 25K-30018 "O" RING, Piston Stop

4 1 C-616

5 4E-06

6

7 40K-02

8 214946

BOLT, Valve to Converter ___ _

LKWSHR, Valve to Converter _

§PISTON, Valve (See Item 16)

PLUG, Valve Housing Pipe __

SEAT, Safety Valve _

tNot Illustrated §Not Sold Separately

Na. Req'd.

4

4

2

Item Na.

9

Part Na.

10 220981

11 220982


§BODY, Valve ~See Item 16)------------------ -

SPRING, Valve - Inner-----------------------

SPR I NG, Valve - Outer-----------------------

12 25K-30018 "O" RING, Piston Stop-----------------------

13 660178 Pl N, Piston Stop----------------------------------

14 220983 STOP, Piston--------------------------------------- 1

15 25K-40104 "O" RING, Valve to Converter ______________ ,

16 214949 tGASKET, Valve to Housing ___________________ 1


66 PM 2726

~ amam CONSTRUCTION MACHINERY DIVISION -2 3 4 5 6

13

24 23 22 21 20 19 16 15 14 TS-264-P

HYDRAULIC PUMP - CONVERTER CHARGING-WAUKESHA For Serial: 75A GAS-10223 thru 10239, 10241 thru 10246, 10252thru 12183, 1CA3170thru 1CA3243,

1CA3245, 1CA3247, 1CA3253, 1CA3257, 1CA3260, 1CA3270, 1CA3276, 1CA3282, 1 CA3305, 1 CA3311, 1 CA3330, 1 CA3332, 1 CA3336, thru 1 CA3343, 1 CA3345 thru 1CA3385

Item No.

A B

C

l 2 3 4 5 6 7 8 9

10 11

75A DIESEL - 10223D thru 12183D, 1CB893 thru 1CB921, 1CB923, 1CB924, 1CB930, 1CB932, 1 CB936, 1 CB937

Part No.

758 - 6201 thru 6270 75R-7155 thru 7183

Description No.

Req'd.

221450 *PUMP ASSY (Inc. 1 thru 24) ____________ _ 942404 REPAIR KIT, Major (Inc. 1 thru 4, 6, 10

thru 14, 16 thru 20, 22, 23, 24) ___ _ 942403 REPAIR KIT, Minor (Inc. 1, 2, 14, 18,

19, 23, 24) ------------------------------ ------- 1

§WASHER, Back-Up ------------------ ______ ____ 1 §"O" RING __ --------------------------------------- 1 §SPRING, Bearing -------------------------------- l §BEARING, Cover - Drive __________________ 1

§GEAR, Drive ---------------------------------------- 1 §BEARING, Body - Drive -------------------- 1 § BODY ------------------------------------------------- 1

16F-02 PLUG, Seal Chamber ------------------ _______ 1 §PLUG, Seal Relief ------------------------------ 1

---- **§SPRING, Seal Relief---------------------------- 1 --- **§BALL, Seal Relief -------------------------------- 1

Item No.

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Part No.

551906 8D-06 4E-06

*NOTE: When complete Pump Assembly is replaced use 450072 Pump Assembly, tNot Illustrated §Not Sold Separately


§BOLT, Cover to Body ------------------------- 8 §WASHER, Cover to Body______ ___________ 8

§GASKET, Cover ---------------------------------- l §COVER ------------------------------------------------ l §WASHER, Cover to Body__________________ 8 §NUT, Cover to Body __________________________ 8

§SEAL, Shaft Oil --------------------------- ______ 1 §RING, Seal Retaining ------------------------ 1 §BEARING, Body - Driven ------------------ 1 §GEAR, Driven -------------------------------------- 1 §BEARING, Cover - Driven _______________ 1

§"0" RING ------------------------------------------ 1 §WASHER, Back-Up ---------------------------- l tGASKET, Pump to Converter ______________ 1 tNUT, Pump to Converter -------------------- 6 tLKWSHR, Pump to Converter ------------ 6

**NOTE: Spring and Ball to be removed when rebuilding pump.


PM 2726 67.1

11

I

~ mm:im CONSTRUCTION MACHINERY DIVISION -

2 3 4 5 6 1 8 9 10 11 12 13

Inlet

24 23 22 21 20 19 18 17 16 15 14 TS-2732-P

HYDRAULIC PUMP - CONVERTER CHARGING-WAUKESHA For Serial: 75A GAS - 1 CA3244, 1 CA3246, 1 CA3248 thru 1 CA3252, 1 CA3254, 1 CA3255, 1 CA3256,

1CA3258, 1CA3259, 1CA3261 thru 1CA3269, 1CA3271 thru 1CA3275, 1CA3277 thru 1 CA3281, 1 CA3283 thru 1 CA3304, 1 CA3306 thru 1CA3310, 1 CA3312 thru 1 CA3329, 1CA3331, 1CA3333, 1CA3334, 1CA3335, 1CA3344, 1CA3386

75A DIESEL - 1CB922, 1CB925 thru 1CB929, 1CB931, 1CB933, 1CB934, 1CB935, 1CB938.

Item ,art No. No.

A 450012 B 498152 C 498151

D 498024

E 498113

l 2 3 4 5 6 7 8 9

10

No. Description Raq'd.

*PUMP ASSY (Inc. l thru 24) ______________ 1 REPAIR KIT, Major (Inc. 9, 11, 14, 16) l

**REPAIR KIT, Minor (Inc. l, 3, 4, 6, 7, 8, 17, 18, 19, 21) ·--------------------------

GEAR SET, Drive & Driven (Inc. l 0, 15) ______ -----------------------------

REPAIR KIT, Shaft Seal (Inc. 1, 2, 21 thru 24) ------------------------------------------ 1

§"O" RING, Retainer -------------------------- 1 §RETAINER, Shaft Seal ------------------------ 1 §SOLT, Cover to Body -------------------------- 8 §WASHER, Cover to Body _____ ------------- 8 §PLUG, Cover -------------------------------------- 1 §GASKET, Cover _____ ---------------------------- 1 §''O" RING, Cover Thrust Plate ---------- 1 §WASHER, Back-Up ---------------------------- 1 §THRUST PLATE, Cover ------------------------ 1 §GEAR, Driven --------·--------------------------- 1

Item No.

11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

*NOTE: When complete pump ossy is replaced use 450072 Pump.

Part No.

551906 SD-06 4E-06

No. Description Raq'd.

§THRUST PLATE, Body -----------------------§BODY (Inc. Bushings) (See Note II A") §PLUG, Body ---------------------------------------§THRUST PLATE, Body ------------------------§GEAR, Drive ______________ -----------------------§THRUST PLATE, Caver _______________ ________ 1 §SPRING, Cover Thrust Plate ______________ 6

§WASHER, "O" Ring Back-Up ------------ 1 §"O" RING, Cover Thrust Plate __________ 1 §COVER (Inc. Bushings) (See Note "A") l §"0" RING, Retainer -------------------------- l §SEAL, Inner Oil ---------------------------------- 1 §SEAL, Outer Oil ------------------ ------------- 1 §RING, Seal Retainer -------------------------- 1 tGASKET, Pump ta Converter ___ -------- 1 tNUT, Pump to Converter -------------------- 6 tLKWSHR, Pump ta Converter ____________ 6

**NOTE: Minor Repair Kit consists of "O" Rings, Bock-up Washers, Gaskets ond opproximotely 20% of the hardware items such cs bolts, nuts, springs end washers. The lotter for the purpose of replacing any of these items lost or damaged in repair operation.

NOTE "A": Pump Bodies, Covers end Bearings will not be mode ovoiloble for field use since when these items ore worn beyond limits permitting re-use, the cost of rebuilding the pump exceeds practical limits. In such coses o new pump assembly should be utilized.


WHEN ORDERING PARTS, ALWAYS STATE MODEL AND SERIAL NO, OF MACHINE

68 PM 2726

~ tnma

1

28

2

27


3 4 5 6 1 8 9 10 11 12 13

rJ"\A f1li' ~~ (;: -~~~l

\WI' ,Wd.Ji, ( ,!·; I ' ' (1 - ~ I - I -- - - I \::.J,,I ~ ',°a,' ~..., \ ' \..:Jj

0

26 25 24 23 22 21 20 19 18 17

14

HYDRAULIC PUMP - CONVERTER CHARGING-WAUKESHA

-15

16 TS-2735-P

For Serial: 75A GAS - 1 CA3305, 1 CA3311, 1 CA3330, 1 CA3332, 1 CA3336 thru 1 CA3343, 1 CA3345 thru 1 CA3385, 1 CA3387 and thereafter

Item No.

A B C

Part No.

450072 498128 498127

498024

498113

75A DIESEL - 1 CB924, 1 CB930, 1 CB932, 1 CB936, 1 CB937, 1 CB939 and thereafter No.

Description Req'd.

PUMP ASSY (Inc. 1 thru 28) _____________ _ REPAIR Kit, Major (Inc. 10, 12, 17, 19)

*REPAIR KIT, Minor (Inc. 1, 3, 4, 6, 8; 9, 20, 21, 22, 25) ---------------------------

GEAR SET, Drive & Driven (Inc. 11, 18) --------------------------------------------

REPAIR KIT, Shaft Seal (Inc. 1, 2, 25 thru 28) ------------------------------------ 1

§"O" RING, Retainer ---------------------------- 1 §RETAINER, Shaft Seal ------------------------ 1 §BOLT, Cover to Body-------------------------- 8 §WASHER, Cover to Body-------------------- 8 §PLUG, Cover ---------------------------------------- 1 §GASKET, Cover -------------------------------- 1

ltera No.


No. Req'd.

---- **§BEARING, Body __ ----------------------------- l §PLUG, Body --------------------------------------- 1

---- **§BODY ------------------------------------------------ 1 ---- **§BEARING, Body---------------------------------- 1

§ THRUST PLATE, Bady _____ -------------------- 1 §GEAR, Drive -------------------------------------- 1 §THRUST PLATE, Cover ________________________ 1 §SPRING, Cover Thrust Plate ______________ 6 §WASHER, "O" Ring Back-Up ____________ 1 §"O" RING, Cover Thrust Plate __________ 1

--- **§BEARING, Cover -------------------------------- 1 ---- **§COVER ------------------------------------------------ 1

D

E

1 2 3 4 5 6 7 8 Sl

--- **§BEARING, Cover- Driven ---------------- 1

13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

§"O" RING, Retainer -------------------------- 1 §SEAL, Inner Oil ------------------------------------ 1 §SEAL, Outer Oil -------------------------·------- 1

10 11 12

§"O" RING, Cover Thrust Plate ____________ 1 §WASHER, "O" Ring Back-Up ____________ 1 §THRUST PLATE, Cover ------------------------ 1 §GEAR, Driven ------------------------------------ 1 §THRUST PLATE, Body ------------------------ 1

214961 551906 8D-06 4E-06

§RING, Seal Retaining ______ ____________ ____ l

tSLEEVE, Pump Drive--------------------------- 1 tGASKET, Pump to Converter ____________ l tNUT, Pump to Converter____________________ 6 tLKWSHR, Pump to Converter ____________ 6

*NOTE: Minor Repai; Kit consists of "O" Rings, Back-up Washers, Gaskets and approximately 20% of the hardware items such ~s bolts, nuts, springs and washers. The latter for the purpose of replacing any of these items lost or damaged in repair operation.

**NOTE: Pump Bodies, Covers and Bearings will not be made available for field use since when these items are worn beyond limits permitting re-use, the cost of rebuilding the pump exceeds practical limits. In such cases a new pump assembly should be utilized.



PM 2726 69

8 9 10 11 12 13 14 15 16 17 I '--

1 2 3 "----._

4 " ~ 18 n

0 ) :z: (

"' "' " ... 19 :11111

C: /'-. n / '>-£ / I ...

/-{ ';-/'/ ,,.,:t-1 -~~:'.:'~ 20 0 / / .p/ ~ ;< / /'-~/ ,;/~ / ,, I :z: y /~ // 111 ,;, 7 "

~ // / 111 /// ~Xp _-::-,.. I y ;',/ / ,,--- ---. I /1~ (J_I /,,- . ti'-- / ~ I ~/ // \ 11 1

I/; -:,/"·J.. \ I ..., I I~// \\ jl /,,/ / '(() / \ \ )o Ii I I/ / /; / / ~ C 0 I II 11 / II 111 Ii I // 1/ro ..1.-~~ n

I ii,,, 1,1 , .. " ''ff ,r - ::z: 1 11 11 .. · // 111 111 \ 1, 11 , • ), -- -I 11 1 I ,f I ~ "i1 ~~l - /Ill 22 :z: I II 11 . · ,/ f " I II I I ...___,./' --;/"--J <' II , ~ "' "" )-~((). ~ / /~-------- :11111 I II 11 .p6ti \ '/

I ,1 '-._(() ~) 23 "< I l 11 /• ~ ,,

L '~/ "" '1 -J_f~ -< -"' -25 24 0

:z:

51 50 49 48 4 7 46 45 44 43 33

HYDRAULIC SYSTEM - TRANSMISSION AND TORQUE CONVERTER - WAUKESHA TS-2593-P I

r.mm ~

CONSTRUCTION MACHINERY DIVISION -HYDRAULIC SYSTEM -TRANSMISSION AND TORQUE CONVERTER-WAUKESHA For Serial: 75A- 8123 thru 10222, 10240 and 10247 thru 10251

Item No.

Part No.

2 528295

3

4 26F-5

5 551873

6 83F-6

7 712750

8 26F-2

9 550874

l O l 8F-2

l l 5K-207

12 550876

13 83F-7

14 550866

15 83F-6

16 13F-04

17 30F- l

18

19 550758

20 5K-207

21 l 8F-2

22 550758

23 26F-2

24

25

36F-5

551323

26 551896

27

27A 552290

278 551876

28 550724

29 2C-620

30 551996

31 6H-16

32 4E-06

758 - 6123 thru 6200 75R- 7123 thru 7154


RADIATOR - (See Index)

HOSE, Cooler line to Radiator __________ _

TORQUE CONVERTER - (See Index) __

ELBOW, Hose to Converter _______________ _

LINE, Overflow ______________________________ _

ELBOW, Line to Converter __________________ 1

HOSE, Converter to Transmission _____ _

ELBOW, Hose to Clutch Cover ________ _

HOSE, l st & 3rd to Reverse Clutch ____ _

TEE, 1st & 3rd Clutch __ _ ________________ _

NIPPLE, Tee to Clutch Cover -------------

HOSE, Cross to l st & 3rd Clutch

ELBOW, Cooler Line to Cross ___________ _

CROSS, Transmission Clutches _________ _

ELBOW, Overflow Line to Transmission

PLUG, Tee ------------------------------------------

TEE, Hose to Transmission _________________ _

TRANSMISSION - (See Index) ______ _

HOSE, Cross to Forward Clutch _____ _

NIPPLE, Tee to Clutch Cover ____________ _

TEE, Forward Clutch ______________________ _

HOSE, Forward to 2nd & 4th Clutch _

ELBOW, Hose to Clutch Cover __________ _

ADAPTER UNION ----------------------- _____ _

SENDER UNIT, Converter Temperature

TEE, Cooler Line to Converter ____ _

LINE, Cooler

For Machines Equipped with Filter ____ l

For Machines Not Equipped with Filter 1

HOSE, Converter Drain __ ___ ___ ___________ 1

BOLT, Bracket to Frame -------------------- 1

BRf'.CKET, Cooler Line Clip ________________ 1

CLIP, Cooler Line -------------------------------- 1

LKWSHR, Bracket to Frame ______ _______ _ 1

tNot Illustrated

Item No.

33

Part No.

20-06

34 2C-612

34A 20-06

34B 4E-06

35

35A 550873

35B 553324

36

36A 31 F-4

36B 31 F-5

37 2D-05

37A 4E-05

38 552473

39

39A 552291

398 551872

40 89F-7

41 552470



BOLT, Clip to Bracket _

NUT, Clip to Bracket __ _

LKWSHR, Clip to Bracket ___ _

HOSE, Trans. to Conv. - Suction

For Units with Y2'' Pipe Tap ___________ _

For Units with %" Pipe Tap _______________ _

ADAPTER UNION

For Units with W' Pipe Tap _

For Units with %" Pipe Tap __

NUT, Filter to Bracket _______ _____ ________ 4

LKWSHR, Filter to Bracket __ ________ 4

BRACKET, Filter __ _

LINE, Cooler Return

For Machines Equipped with Filter ___ _

For Machines Not Equipped with Filter

CONNECTOR, Line to Filter__ _ _______ _

FILTER, Conv. & Trans. Oil (Inc. 41A) __

41 A 957577 tCARTRIDGE KIT, Oil Filter _______________ _

42

43

2C-514

84F-7

44 4E-06

45 2D-06

46 2C-612

46A 20-06

46B 4E-06

47 552474

48 6H-16

49 551996

50 2C-620

51 528295

BOLT, Filter to Bracket __ _ __ ______________ _ 4

ELBOW, Line to Filter __

LKWSHR, Bracket to Frame __


BOLT, Clip to Bracket

NUT, Clip to Bracket ______________________ _

LKWSHR, Clip to Bracket __________________ _

LINE, Cooler - Radiator to Filter _____ _

CLIP, Cooler Line ____________________________ _

BRACKET, Cooler Line Clip ______ _ _ __ _

BOLT, Bracket to Frame __________________ _

HOSE, Radiator to Cooler Line _______ _

PM 2726


71

10 11 12 13 9 14

55

\\3 25

~ (:: /, 41 35 52 50 48 46 44 42 40 38 36

~ ~ HYDRAULIC SYSTEM - TRANSMISSION AND TORQUE CONVERTER - WAUKESHA TS-2592-P

~'----------------------------------------------------'

n 0 z "' ... .a:, C: n ... 0 z

:t l> n :c z

-<

"' 0 z

I

~ mm:ma CONSTRUCTION MACHINERY DIVISION -HYDRAULIC SYSTEM -TRANSMISSION AND TORQUE CONVERTER-WAUKESHA For Serial: 75A GAS - 10223 thru 10239, 10241 thru 10246, 10252 thru 12183, 1CA3170 thru 1CA3418

75A DIESEL - 10223D thru 12183D, 1 CB893 thru 1 CB968

l+.tm No.

Part No.

2 528295

3

4 26F-5

5 514613

6 85F-8

7 519738

8 26F-2

758 - 6201 thru 6270

75R - 7155 thru 7183

No. Description Reti'd.


HOSE, Cooler Line to Radiator _________ _

TORQUE CONVERTER - (See Index)._

ELBOW, Hose to Converter _______________ _

LINE, Converter Overflow _________________ _

ELBOW, Line to Converter-----------·------

HOSE, Reg. Valve to Transmission. ____ _

ELBOW, Hose to Clutch Cover _________ _

9 55087 4 HOSE, 1st & 3rd to Reverse Clutch -·--

10 55087 6 HOSE, Cross to 1st & 3rd Clutch _____ _

11 18F-2 TEE, l st &, 3rd Clutch --------------------------

12 5K-207 NIPPLE, Tee to Clutch Cover ---·-------·--

13 550724 HOSE, Converter Drain ----------------------

14 83F-7 ELBOW, Line to Cross ------------------------

15 550866 CROSS, Transmission Clutches -------·--

16 83F-8 ELBOW, Line to Transmission ________ : __ _

17 l 3F-04 PLUG, Tee --· ··-----·-----· ··---···-·---···-----·--

18 30F- l

19

20 550758

21 5K-207

22 l 8F-2

23 550758

24 26F-2

25 36F-5

J.26 36F-6

TEE, Hose to Transmission --------··--··---·

TRANSMISSION - (See Index) -···--·---

HOSE, Cross to Forward Clutch _______ _

NIPPLE, Tee to Clutch Cover---··-------

TEE, Forward Clutch --··---·---·--··-·-----·---

HOSE, Forward to 2nd & 4th Clutch __


ADAPTER UNION -------·----·--·----·--------

ADAPTER UNION -----------------------·-----·

27 356626 BUSHING, Transmission Reducing ----

28 551323 SENDER UNIT, Converter Temperature

29 551896 TEE, Cooler Line to Converter ------------

30 221084 HOSE, Pump to Regulator Valve ____ _

tNot Illustrated

Item No.

31

Part No.

2C-620

32 551996

33 6H-16

34 4E-06

35 2D-06

36 2C-612

36A 20-06

368 4E-06


BOLT, Bracket to Frame -·--··--------------··

BRACKET, Cooler Line Clip ·-·-·-····-----·

CLIP, Cooler Line ·---··· _ ···-·----·---·---·-·-·

LKWSHR, Bracket to Frame -----·---------·

NUT, Bracket to Frame ---·-····· --·-------·

SOLT, Clip to Bracket -·······-···-··---·----

NUT, Clip to Bracket -------------------------

LKWSHR, Clip to Bracket __ ·--··------------

37 552290 LINE, Cooler - Converter to Radiator

38 26F-6 ELBOW, Hose to Pump ·····- ·- ····-·-·· -·

39 552156 HOSE, Trans. to Conv. - Suction _______ _

40 2D-05 NUT, Filter to Bracket -·-·---··········------- 4

41 4E-05 LKWSHR, Filter to Bracket -·-·-------·---- 4

42 552473 BRACKET, Filter -----·----··-··--------··-··---·--

43 89F-7 CONNECTOR, Line to Filter ·----·····-·· ·-

44 514614 LINE, Filter to Transmission --·--····--·-··-

45 552470 FILTER, Transmission Oil (Inc. 45A) ___ _

45A 957577 tCARTRIDGE KIT, Oil Filter ---·--·-·-··---·--

46 2C-514

47 84F-7

48 552474

49 4E-06

50 20-06

51 2C-612

51A 20-06

51 B 4E-06

52 6H-16

53 551996

54 2C-620

55 528295

SOLT, Filter to Bracket --··-···· ···----·------- 4

ELBOW, Line to Filter --·----·-----·---------

LINE, Radiator to Filter -------··--------·-- _

LKWSHR, Bracket to Frame ------··--··- ·

NUT, Bracket to Frame ·······--·------··-··

SOLT, Clip to Bracket ------------------·--"-

NUT, Clip to Bracket --······-----···-----·- __

LKWSHR, Clip to Bracket -------·---·---·-

CLIP, Cooler Return Line -------·-----------

BRACKET, Cooler Line Clip -·----··- -·-···

SOLT, Bracket to Frame --------·----·-----

HOSE, Radiator to Return Line -· ··---·--·-

PM 2726


73

lirnTrr.1 DmJ:C:ttD

/


74

-

<( :c Cf) UJ ~ :::> <( ~ I

C: LJ.J fa: UJ

> z 0 u UJ :::> 0 C: 0 f-0 z <(

z 0 Cf) CJ)

::'iE Cf)

z <( C: f-l

::'iE UJ fCJ)

>Cf)

u ...J :::> <( C: 0 >:c

PM 2726

~ m:m:tm

CONSTRUCTION MACHINERY DIVISION -HYDRAULIC SYSTEM-TRANSMISSION AND TORQUE CONVERTER-WAUKESHA·

For Serial: 75A GAS - 1 CA3419 and thereafter

Item No.

Pert Ne.

2 536048

3

4 531401

5 645432

6 553843

7 551323

8 26F-6

9

9A 36F-5

98 36F-6

10 26F-2

11 550874

12 l 8F-2

13 5K-207

14 550876

15 527550

16

17

13F-04

30F-1

18 550866

19 550758

20 83F-7

21 5K-207

75A DIESEL - 1 CB969 and thereafter

No. Description Req'd,



TORQUE CONVERTER - (See Index)

COOLER LINE, Converter to Radiator

HOSE, Pump to Regulator Valve _______ _

ADAPTER UNION ___ ---------------------------


ELBOW, Hose to Pump ------------------------

ADAPTER UNION

For Serial:

GAS - l CA34 l 9 thru l CA3501

DIESEL- 1CB969 thru 1CB1013 ___ _

For Serial:

GAS - l CA3502 & thereafter

DIESEL - l CB l 014 & thereafter __

ELBOW, Hose to Clutch Cover ___________ _

HOSE, 1st & 3rd to Reverse Clutch ___ _

TEE, 1st & 3rd Clutch .. ···-------------------'

NIPPLE, Tee to Clutch Cover --------,-- .

HOSE, Cross to l ~t & 3rd Clutch _______ _

HOSE, Converter to Tee ... ________________ _

PLUG, Tee -------------------------------·------------

TEE, Hose to Transmission _______________ _

CROSS, Transmission Clutches _________ _

HOSE, Cross to Forward Clutch _____ ..

ELBOW, Cooler Line to Cross __________ _

NIPPLE, Tee to Clutch Cover _____________ _

Item No.

22

Part No.

l BF-2

23 550758

24 26F-2

25

26 356626

27 36F-6

28 20-05

29 4E-05

30 552473

31 514614

32 531006

33 552470


TEE, Forward Clutch _______ _

HOSE, Forward to 2nd & 4th Clutch _


TRANSMISSION - (See Index) _______ _

BUSHING, Transmission Reducing _____ _

ADAPTER UNION ---------------·- ___________ _

NUT, Filter to Bracket _______ ________________ 4

LKWSHR, Filter to Bracket __ _____ _______ 4

BRACKET, Filter Attaching _________ _ _

COOLER LINE, Filter to Transmission __

HOSE, Converter Suction ______________ _

FILTER ASSY, Trans. & Conv. Oil (Inc. 33A) ____________________________ _

33A 957577 tCARTRIDGE KIT, Oil Filter ____________ _

34 89F-7 CONNECTOR, Cooler Line to Filter ___ _

35 536367 *HOSE, Converter Overflow ______________ _

36 2C-514

37 531400

38 26F-6

39 531402

40 83F-8

41 2C-612

42 6H-18

43

44

4E-06

20-06

45 4E-06

46 551996

47 2C-620

48 536048

BOLT, Filter to Bracket ____________________ _

ELBOW, Cooler Line to Filter

ELBOW, Hose to Converter _

COOLER LINE, Radiator to Filter _______ _

ELBOW, Cooler Line to Converter

BOLT, Clip to Bracket ____ __ _____________ 2

CLIP, Cooler Line _________ _ 2

LKWSHR, Clip to Bracket _______________ _ 2

NUT ·-----------·-··----· ----------·-·------. 4

LKWSHR, Bracket to Frame _________ _____ 2

BRACKET, Cooler Line Clip ___ ______ ____ 2

BOLT, Bracket to Frame -------------------- 2

HOSE, Radiator to Cooler Line _________ _

*NOTE: When 536367 Hose in installed in Serial GAS - 1 CA3.419 thru 1 CA3501 and DIESEL - 1 CB969 thru 1CB1013, One (l) 36F-6 Adapter Union must be used al transmission end. Reducing Bushing in Transmission is to be discarded.

tNot Illustrated


PM 2726 75

r.nmT!'4 EmDlm:II

... ... -


... - a,

...

..

... Ar- 0 ~ ~~ -=-_-=:_--: ~~ \

\ \ \\ \ I '- \,, \ \\ \ \ ' \'...'.,~

\ );, \ ' \ ...,,.,, \\,,::;' \"-Yi~

rr,, ,~\\ \ ', 1 '\ '"'-: \ \\ \ ,, ___ ) \\ \ \ \\ \.... _______ _,_\

\\ r-------1~1 \ >--. "' (0 \ ._,_:_=-------..! -'\ '( / ---------7 --.L_ _________ ./

76

... N

.... N

"" N

0, N

C) ....

... .....

-

~ 0 I

a: UJ fa: UJ > z 0 u UJ ::, 0 a: 0 f-Cl z <1'. z 0 VJ VJ

:iE VJ z <1'. a: f-l

:iE UJ fVJ >VJ u ...J ::, <1'. 0:: Cl >I

PM 2726

CONSTRUCTION MACHINERY DIVISION -HYDRAULIC SYSTEM - TRANSMISSION AND TORQUE CONVERTER -G.M.

Item No.

Part No.

2 536048

3

4 531676

5 691800

6 36F-5

7 551323

8 26F-6

9 36F-6

10 26F-2

11 550874

Description No.

Req'd.

RADIATOR - ( See Ind ex l-----------------


TORQUE CONVERTER (See Index) __ _

COOLER LINE, Converter to Radiator

HOSE, Pump to Regulator Valve _______ _

ADAPTER UNION ________ _


ELBOW, Hose to Pump ____________________ _

ADAPTER UNION ___________ - --- ------ ---


HOSE, 1st & 3rd to Reverse Clutch ___ _

12 l 8F-2 TEE, 1st & 3rd Clutch ______ ----------------

13 5K-207 NIPPLE, Tee to Clutch Cover ----- ---

14 55087 6 HOSE, Cross to 1st & 3rd Clutch _____ _

15 531167 HOSE, Converter to Tee --------------------

16 l 3F-04 PLUG, Tee ________________ ------------------------

17 30F- l TEE, Hose to Transmission ____ -------------

18 550866 CROSS, Transmission Clutches _ --------

19 550758 HOSE, Cross to Forward Clutch ------ _

20 Not Applicable this Model ----------------

21 5K-207 NIPPLE, Tee to Clutch Cover ____________ _

/ 22 18F-2 TEE, Forward Clutch ___ __ ______ _ ________ _

23 550758 HOSE, Forward to 2nd & 4th Clutch __

24 26F-2 ELBOW, Hose to Clutch Cover __________ _

(l,

25 TRANSMISSION - (See Index) _____ _

26 356626 BUSHING, Transmission Reducing _____ _

t Not Illustrated

Item No.

Part No.

27 36F-6

28 2D-05

29 4E-05

30 531168

30A 2C-620

30B 20-06

30C 4E-06

31 529874

32 656132

33 552470


ADAPTER UNION _____________ _

NUT, Filter to Bracket ------------------------ 4

LKWSHR, Filter to Bracket ---------------- 4

BRACKET, Filter Attaching ----------------

BOLT, Bracket to Frame ____________________ 2

NUT, Bracket to Frame ---------------------- 2

LKWSHR, Bracket to Frame ______________ 2

COOLER LINE, Filter to Transmission __

HOSE, Converter Suction --------------------

FILTER ASSY, Trans. & Conv. Oil (Inc_ 33A) ------------------------------- ____ _

33A 957577 tCARTRIDGE KIT, Oil Filter ----------------

34 83F-7 CONNECTOR, Cooler Line to Filter ___ _

35 539106 HOSE, Converter Overflow _____________ _

36 2C-514 BOLT, Filter to Bracket ___ ___ -------------- 4

37 730149 ELBOW, Cooler Line to Filter ___________ _

38 26F-6 ELBOW, Hose to Converter ----------------

39 53.1677 COOLER LINE, Radiator to Filter _______ _

40 89F-8 ELBOW, Cooler Line to Converter ___ _

41 2C-612 SOLT, Clip to Bracket ____ ____ ____________ 2

42 6H-18 CLIP, Cooler Line -------------------------------- 2

43 4E-06 LKWSHR, Clip to Bracket _____ _____________ 2

44 2D-06 NUT _____________ --------------------------------- 4

45 4E-06 LKWSHR, Bracket to Frame ________________ 2

46 551996 BRACKET, Cooler Line Clip --------- ___ 2

47 2C-620 SOLT, Bracket to Frame______________________ 2

48 536048 HOSE, Radiator to Cooler Line _______ _


PM 2726 77

~ mm.tl1

2 3


4 5 6 7 8 9 10 11 12 13 14 15 16

32 31 30 29 28 27 26 25 24

AXLE ASSEMBLY

78

-

TS-2791-P

PM 2726

~ mmml

Item Part No. No.

A B 130064

C 130056

100970 2 106762 3 4 114463

5 114463

6 675256 7 675255 8 17C-1024

9 103522 10 103445 11 104412 12 121062

13 109055

14 106344 15 16 111719 17 675253 18 106087 19 105422 19A 11 F-12 19B 106656 20 20-08 21 101092 22 4E-08 23 675252 24 107608 25 940330 26 110114 27 100967 28 11 F-12 29 106059 30 31 3E-08 32 lC-808 33 34 4E-07 35 lC-720 36 106058 37 224028 38 106455 39 106454 40 106880

41 41A 815576 42B 815509

t Not 111 ustroted

CONSTRUCTION MACHINERY DIVISION -AXLE ASSEMBLY 75A and 75B - Front Drive 75R - Rear Drive

Description

AXLE ASSY (Inc. 1 thru 41) For Serial: 7 5A - 8123 thru 12183, 1 CA3 l 70 & thereafter & 1 CB893 & thereafter

75B - 6123 thru 6270 7 5R - 7156 thru 7183 --------------------------------------- ·-------------------------------------

No. Req'd.

For Serial: 7 5R - 7123 thru 7155 --------------------------------------------------------------------------

BOLT, Planet Spider to Hub ---------------------------------------------------------------------------------------- 20 WASHER, Planet Spider to Hub ----------------------------~----------------------------------------------------- 20 PLANET SPIDER - See Index -------------------------------------------------------------------------------------NUT, Outer Spindle __ ---------------------------------------------------------------------------------------------- 2 NUT, Inner Spindle· ------------------------------------------------------------------------------------------- 2 CONE, Outer Hub Bearing --------------------------------------------------------------------- 2 CUP, Outer Hub Bearing ------------------------------------------------------- ---------------------------------- 2 BOLT, Drum to Hub ------------------------------------------------------------------------- 12 NUT, Wheel ------------------------------------------------------------------------------------------------------- 20 STUD, Wheel ---------------------------------------------------------------------------- 20 WASH ER, Drum to Hub ________ -------------------------------------------------------------------------- 12

NUT, Wheel Stud ----------------------------------------------------··----------------------------- 20 OIL THROW ---------. -------------------------------------------------------------------------------- 2 DRUM, B_rake --------------------------------------------------------------------------------------------- 2 FRONT BRAKE ASSY - See Index ----------------------------------------------------------------------------SEAL, Hub Oil ----------------- __ -------------------------------------------------------------------------------------- 2 CONE, Inner Hub Bearing ----------------------------------------------------- ·--------------------------------- 2 SHAFT, Axle ------------------------------------------------------------------------------------------------------ 2 HOU SI NG, Ax I e ______________ .. ---------------------------------------------- ·-----------------------------------------

t PLUG, Housing Filler & Drain ---------------------------------------------------------------------------------- 2 t BREA THE R, Axle Housing --------------------------------------------------------------------- -------------------

NUT, Brake Attaching -------------------------------------------------------------------------------------- 16 BOLT, Brake Attaching ---------------------------------------------------------------------------------------------- 16 LKWSH R, Brake Attaching ---------------------------------------------------------------------------------- 16 CUP, Inner Hub Bearing --------------------------------------------------------------------------------- 2 CLIP, Brake Drum Inspection Hole --------------------------------------------------------------------------- 2 HUB, Inter no I Geer (I n c. 40) . _ ----------------------------------------------------------------------- 2 HUB ASSY (Inc. 7, 23) -------------------------------------------------------------------------------- 2 LOCK, Spindle Nut ----------------------------------------------------------------------------------------------- 2 PLUG, Hub Filler ---------------- ------------------------------------------------------------------ 2 GEAR, Internal ---------------------------------------------------------------------------------------------- 2 OMIT GASKET - Use Perma-T ex No. 2----------------------------------------------------------------------

LKWSHR, Planet Puller Hole ------------------------------------------------------------------------------------- 4 BOLT, Planet Puller Hole -------------------------------------------------------------------------------------- 4 OMIT GASKET - Use Perma-Tex No. 2 -----------------------------------------------------------------LKWSH R, Thrust Cap -------· ------------------------------------------------------------------------------------ 12 BOLT, Thrust Cap ------------------------------------------------------------------------------------- 12 GEAR, Sun ---------------------------------------------------··------------------------------------------------------- 2 RI NG, Sun Geer Reta in i ng ------------------------------------------------------------------------------------ 2 WASHER, Sun Gear Thrust -------------------------------------------------------------------------- 2 CAP ASSY, Sun Gear Thrust (Inc. 38) ----------------------------------------------------------------------"- 2 BOLT, Internal Gear to Hub ----------------------------------------------------------------------------- 16

DIFFERENTIAL & CARRIER ASSY - See Index

For 130064 Axle ---------------------------------------------------------------------------------------------------For 130056 Axle --------------------------------------------------------------------------------

PM 2726


79.2

~ m!IttttD CONSTRUCTION MACHINERY DIVISION -

------ -

1 2 3 4 5 6 7 I 9 10 11 12 19 20 21

31 30 29 28 27 26 2~ 24 23 22 TS-2614-P

AXLE ASSEMBLY - FRONT STEERING - MODEL 75R lt~m No.


No. I Item Req'd. No.


No. Req'd.

-------------------- --------------------A 130148

1 102159 2 4D-20 3 102251 4 675240 5 672569

6 6A 106139 68 106140

AXLE ASSY (Inc. l thru 32) ________ _

CAP, Hub Grease -·-l 2

NUT, Hub Bearing ------------------ _ _ ___ __ 2 WASHER, Hub Bearing ________ __________ 2 CONE, Outer Hub Bearing _____ 2 CUP, Outer Hub Bearing _______ _ _ _ __ 2

KNUCKLE ASSY, Steering (Inc. 11, 27) Right Hand ___________ ---------------------------

Left Hand --------------------------------------------

7 675304 CUP, Inner Hub Bearing ______________________ 2 8 667348 CONE, Inner Hub Bearing _________________ 2

9 102157 SEAL, Hub Oil ------------------------------------ 2 l O l 02252 tSHIM, Steering Knuckle ----------- _________ _ 11 102225 BUSHING, Steering Knuckle ______________ 2 12 12F- l l O PLUG, Knuckle Expansion __________________ 2

13 7 J-3108 KEY, Tie Rod Arm -------------------------------- 2 14 TIE ROD END ASSY - (See Index) ___ _ 15 20-06 15A 4E-06 16 102250

NUT, Drow Key ---------------------------------- 2 tLKWSHR, Drow Key ---------------------------- 2

KEY, Knuckle Drow _________________ 2

tNot Illustrated :J:As Required

17

17 A 106163

17B 106164

18 l F-628

19 4D-16

20 106144

21 550066

22 106149

23

24 672194

25 106162

26 12F-ll0

27 102225

28 106158

29 121062 30

31

32

103445

103522

l F-632

ARM, Tie Rod

Right Hand ----------------------------------------Left Hand ______ ___ _ __________________ _

COTTER, Tie Rod Arm Nut ___ _ 2

NUT, Tie Rod Arm ______ __ __ _ 2

TIE ROD _____ _____________ ___ __ ____ _ __ l

BUSHING, Axle Housing ________ __ ________ 2

HOUSING ASSY, Axle (Inc. 21) _______ _

ORA W KEY - (See Item 16) ______________ _

BEARING, Knuckle Thrust___________________ 2 PIN, Knuckle _____________ ___ __ __________________ 2

PLUG, Knuckle Expansion _______ __________ 2

BUSHING, Steering Knuckle ______________ 2

HUB ASSY (Inc. 5, 7, 29, 30, 31)________ 2

NUT, Wheel Stud -------------------------------- 12

STUD, Wheel -------------------------------------- 12

NUT, Wheel ---------------------------------------- 12 COTTER, Hub Bearing Nut _______________ 2


80 PM 2726

~ ~

Item No.

A

l 2 3 4 5 6 7 8 9

2 3

/ /

Part No.

106346

106350 106351 106352 109088 106351 106350 106349 10J-12 945609


/

4

/

5

/ /

I I I J

6

PLANET SPIDER ASSEMBLY

7

9

TS-283,6-P

No. D e I c r i p t i o n Req'd.

*SPIDER ASSY, Planet (Inc. 1 thru 8) (See Note "A") ____________ ---· _ __ ___ _ ___ __ ____ 4

Quantities listed below are for 1 Planet Spider.

WASHER, Pinion Thrust ---------------------------------------------- ----------------------------------------------- 3 ROLLER, Pinion ------------------------------------------------------------------------------------------------------------ 87 SPACER, Pinion Roller ------------------------------------------------------------------ ---------------- ------------ 3 PINION, Planet __________ ----------------------------------- _______ ___________ __ __ ____ ----------------------------- 3 ROLLER, Pinion -------------------------------------- ---------------------------------------------------------------------- 87 WASH ER, Pin ion Thrust -------------------------------------------------------------- _______ --------------------------- 3

~1 t:,1 Pi~;:~ 0 ;h~i; -~~~:::::~::~~:::::-_-:~~ ::::::·::~~~:::::·_-:::::::::-_-:_~:::::::-:: ::::::::·:~ : __ ::::·:::~~:::::~~~ -:: · ~ SPIDER, Pia net ------------------------ --------------------------------------------------- --------- -------------------------- l

·NOTE: Model 75A requires 4 Planet Spider Assemblies. Models 75B and 75R require only 2. NOTE "A" - For complete replacement of 106346 use 945608 Planet Spider Kit. 945608 also includes 5 - 112287 Dowels,

5 - 116419 Studs and 5- 64D-08 Nuts to replace the existing 5 Bolts Holding Planet Spider to the Hub.

PM 2726


81

. ,:

3 5 9 11 13 17 19 21 23 25 27 JI I 6 16 II 20 22

n 0 :z:

71 "' ... :it,

70 C: n

69----/ ... -0 68 :z:

3: 00 :bi, I\.) n

:a: -:z: "' :it,

-<

t, -< -63 "' -0 :z:

i . _)

AXLE ASSEMBLY - REAR DRIVE STEER TS-2831-P I 58 56 54 5~ 50 53 51

49 47 45 43 48 46 44 . 42 40 61 59 57 55

~ Dlmc:tttl CONSTRUCTION MACHINERY DIVISION -AXLE ASSEMBLY - REAR DRIVE STEER - MODEL 75A

For Serial 8123 thru 8609 Item No.

Part No.

A 130048

l 100970

2 106762

3

4 114463

5 675256

6 675255

7 103445

8 103522

9 675252

10 675253

11 121062

12 106539

13 106762


A.XLE ASSY (Inc. 1 thru 73) . i

BOLT, Pkmet Spider to Hub ................ 20

WASHER, Planet Spider to Hub ....... 20

OMIT GASKET-Use Perma-Tex No. 2

NUT, Inner Spindle .... . 2

CONE, Outer Hub Bearing ........ ...... 2

CUP, Outer Hub Bearing .... . . ... ..... 2 STUD, Wheel ................ . ............. 20 NUT, Wheel . . ....................... .. .......... 20 CUP, Inner Hub Bearing ...... .. . .... .. 2

CONE, Inner Hub Bearing .... . ... 2

NUT, Wheel Stud ........................ 20

BOLT, Spindle Attaching .............. 20

WASHER, Spindle Attaching . . ..... 20

14 106319 :j:SHIM, Steering Arm - .010 ..... .

14A l 06320 :j:SHIM, Steering Arm - .007 .

14B 106321

15 111656

16 106313

17 106121

18 lOH-25

19 106120

20 106322

21 l 04549

22 675305

23 675306

24 106129

25 106127

26 106128

27 2D-10

28 4E-10

29 106790

30 106735

31 106116

31A llF-12

31B 12F-204

31C 106656

32 106096

32A 874260

32B 675436

33 675305

34 109075

35 675306

36 106135

:j:SHIM, Steering Arm - .004 .............. .

WASHER, Steering Arm - Outer 2

BOLT, Steering Arm - Outer . 2

RETAINER, Upper Trunnion Oil 2

FITTING, Upper Trunnion Grease 2

TRUNNION, Upper Steering - L.H .....

BOLT, Steering Arm - Inner....... 2

WASHER, Steering Arm - Inner.... 2

CONE, Upper Trunnion Bearing . 2

CUP, Upper Trunnion Bearing 2

WASHER, Universal Joint Thrust 2

SEAL, Universal Joint Shaft Oil 2

WASHER, Inner Oil Seal .. 2

NUT, Outer End . .... 16

LKWSHR, Outer End ... .......... 16

ARM, Steering ...... .

BOLT, Outer End ...... .

HOUSING, Axle .. . ........ .... . ..... .

1

16

tPLUG, Housing Filler & Drain 2

tPLUG, Housing Expansion ..

tBREATHER, Axle Housing .

SHAFT ASSY, Axle (Inc. 32A, 32B) .. 2

tPIN, Center Ball ....... .... 2

tPIN, Spiral ....................... . 2

CONE, Lower Trunnion Bearing...... 2

OUTER END, Housing ........................ 2

CUP, Lower Trunnion Bearing ............ 2

RETAINER, Dust Seal ............ 2


Item No.

Part No.

37 106133

38 106134

39 lC-612

40 4E-06

41 106136

42 106130

43 106131

44 106132

45 2D-09

46 4E-09

47

47A 106119

47B 108432

Description No.

Req'd.

SEAL, Outer End Dust 2

SPRING, Outer End Dust Seal 2

BOLT, Seal Retainer .. 24

LKWSHR, Seal Retainer .... .... . . 24

RETAINER, Outer End Seal .. ... 4

RETAINER, Outer End Oil Seal 2

GASKET, Oil Seal Retainer .. 2

SEAL, Outer End Oil .. ..... . . ........... 2

NUT, Flanged Trunnion .......... 12

LKWSHR, Flanged Trunnion.. 12

TRUNNION, Steering - Flanged

Lower ........................... ...................... 2

Upper R.H ................. .

48 106115 STUD, Steering Trunnion .. 12

49 106123 :j:SHIM, Flanged Trunnion - .010 ...

49A 106124

49B 106125

50 106112

50A 106100

50B 13F-12

51 106129

52 106127

53 111719

54 106099

55 11_0114

56 117925

57 940330

58 100967

59 11 F-12

60 114463

61 3E-08

62 l C-808

63 106059

64

65 4E-07

66 lC-720

67 11 F-04

68 106058

69 945128

69A 111805

70

71 106880 72

73

:j:SHIM, Flanged Trunnion-: .007 ..... .

:j:SHIM, Flanged Trunnion - .004 ....... .

SUPPORT ASSY, L.H. Spindle (Inc. 48)

tSUPPORT ASSY, R.H. SFJindle (Inc. 48) l

tPLUG, Support Filler .. ............. ........ 2 WASHER, Universal Joint Thrust ........ 2 SEAL, Universal Joint Oil 2 SEAL, Hub Oil .. .. . 2

BUSHING, Spindle .. . .. 2

HUB ASSY (Inc. 6, 9) . 2

SPINDLE ASSY (Inc. 54) 2

HUB, Internal Gear (Inc. 71) . 2

LOCK, Spindle Nut ... . 2

PLUG, Hub Filler .. . 2

NUT, Outer Spindle . ... . 2

LKWSHR, Puller Hole Bolt .. 4

BOLT, Planet Puller Hole ..

GEAR, Internal

4

2


LKWSHR, Thrust Cap ..

BOLT, Thrust Cap

PLUG, Oil Level .

GEAR, Sun .....

12

.. 12

2

2

CAP, Sun Gear Thrust (Inc. 69A) . 2

tVAL VE, Relief .................. .

PLANET SPIDER - See Index ......... .

BOLT, Internal Gear . ...... ............ . 16 tTIE ROD ASSY - See Index ............. . tDIFF. & CARRIER ASSY-See Index


PM 2726 83.1

2 3 4 5 &

17-

74 ~~----'~~=-=-73 ~~~,------l---~__..J_J_j

\54 53 52 44

68 £0 59 58 57 56 ••

AXLE ASSEMBL y - REAR DRIVE STEER

29 31 30

32

33

34

TS-2845-P

I 0

0 :z: ... ::ia

C: 0 ... 0 :z:

3::

0

::r:

:z:

< Ill

0 :z:

I

~ bn!Ittlm

Item Na.

Port Na.

A 130049

100970

2 106762

3

4 100967

5 675256

6 675255

7 103522

8 107256

9 103445

10 104412

11 121062

12 675252

13 675253

14

15 111656

16 l 06313

17 106120

·· 17A 108432

18 lOH-25

19 106121

20 675305 21 - 106322 22 104549

23 106321

23A 106320

23B 106319

24 106790

25 675306

26 106129

27 106127

28 106128

29 109075

29A 11 F-12

30 106096

31 106116

31 A 11 F-12

31B 12F-204 31 C 106656 32 874260 33 675436 34 106998 35 36 106735 37 675306 38 675305

CONSTRUCTION MACHINERY DIVISION -AXLE ASSEMBLY - REAR DRIVE STEER - MODEL 75A For Serial: GAS - 8610 thru 12183, 1 CA3170 and thereafter

DIESEL - 8610D thru 12183D, 1CB893 and thereafter

Na. Description Req'd.

AXLE ASSY (Inc. 1 thru 80) ______________ _

BOLT, Carrier to Axle Housing __________ 20

WASHER, Carrier to Axle Housing 20


LOCK, Spindle Nut ___ ---·-------------------- 2 CONE, Outer Hub Bearing ________________ 2 CUP,. Outer Hub Bearing _ _____ _ ____ _____ 2 NUT, Wheel ___________________________________ 20

BOLT, Drum to Hub ________ 12 STUD, Wheel _____________ ____ _ _________ 20

WASHER, Drum to Hub _ ___ _ _ _____ 12 NUT, Wheel Stud ___________ ___ 20

CUP, Inner Hub Bearing ___ 2

CONE, Inner Hub Bearing _ 2 OMIT GASKET-Use Perma-Tex No. 2

WASHER, Outer Steering Arm Bolt_ _ 2 BOLT, Outer Steering Arm _______ ________ 2

TRUNNION, Steering - L.H. Upper __

tTRUNNION, Steering - R.H. Upper _ FITTING, Upper Trunnion Grease _ __ 2 RETAINER, Upper Trunnion Oil ___ ___ __ 2

CONE, Upper Trunnion Bearing ________ 2 BOLT, Inner Steering Arm __________________ 2 WASHER, Inner Steering Arm __ ______ _ 2

+SHIM, Steering Arm - .004 ______________ _

+SHIM, Steering Arm - .007 _ _ ________ _

+SHIM, Steering Arm - .Dl O _____________ _ ARM, Steering _____________________ ____________ l

CUP, Upper Trunnion Bearing 2 WASHER, Universal Joint Thrust________ 2

SEAL, Universal Joint Shaft Oil __________ 2

WASHER, Oil Seal ------------------------------ 2 OUTER END, Housing ------------ ___________ 2

tPLUG, Outer End Filler ________ ___________ 2

SHAFT ASSY, Axle (Inc. 32, 33) ________ 2 HOUSING, Axle ____ __ _ _ ___ ______ ____ 1

tPLUG, Housing Filler & Drain ______ _____ 2

tPLUG, Housing Expansion _______ _

tBREATHER, Axle Housing -------------------PIN, Center Ball _____ -------------------------- 2

PIN, Spiral ----------------------------------------- 2 NUT, Outer End Bolt __________ ·--------- __ 16 TIE ROD ASSY - (See Index) ___________ _ BOLT, Outer End to Housing ______________ 16 CUP, lower Trunnion Bearing ___________ 2

CONE, Lower Trunnion Bearing -------- 2

Item No.

Part No.

39 106135

40 106133

41 106134

42 lC-612

43 4E-06

44 106136

45 106130

46 106131 47 106132 48 106125 48A 106124 488 106123 49 106115 50 2D-09 51 4E-09 52 106119

- 52A 108432 53 106100 53A 106112 54 106129 55 56 106762 57 106539 58 117913 59 106815 59A 100320 60 106127

61 111719 62 106099 63 117925 64 106879 65 110114 66 llF-12 67 106059 68 69 lC-808 70 3E-08 71 4E-07 72 lC-720 73 114463 74 114463 75 11 F-04 76 106058 77 945128 77A 111805 78 79 106880 80


RETAINER, Outer End Dust Seal ______ 2

SEAL, Outer End Dust -·--------· 2

SPRING, Outer End Dust Seal ---· 2 BOLT, Outer End Seal Ring ___ __ _ 24

LKWSHR, Outer End Seal Ring ______ 24

RING, Outer End Seal Retaining _____ 4

RETAINER, Outer End Oil Seal _ 2 GASKET, Oil Seal Retainer _ ___ 2 SEAL, Outer End Oil _____ ____ ___________ __ 2

+SHIM, Steering Trunnion - .004 _____ _ +SHIM, Steering Trunnion - .007 ____ _ +SHIM, Steering Trunnion - .010 _______ _

STUD, Flanged Trunnion _______ _ 12 NUT, Flanged Trunnion ________ 12

LKWSHR, Flanged Trunnion _ 12 TRUNNION, Flanged - Lower 2

tTRUNNION, Flanged - Upper R.H. __ SUPPORT, Spindle - R.H. (Inc. 49) __ SUPPORT, Spindle - L.H. (Inc. 49)___ l WASHER, Universal Joint Thrust 2 BRAKE ASSY - (See Index) ____________ _

WASHER, Spindle & Brake Attaching_ 20 BOLT, Spindle & Brake Attaching ____ 20 SLINGER, Oil __ __________ ___________________ 2

DRUM, Brake ---·------------- _ __ _ · 2 tCLIP, Inspection Hole ______ -· ________________ 2

SEAL, Universal Joint Shaft Oil __ ______ 2 SEAL, Hub Oil _ =----- ___ ________ 2 BUSHING, Spindle _____ _ __ ___________ 2 SPINDLE ASSY (Inc. 62) ______ _ _ _____ 2 HUB, Internal Gear _____ ----·- -·- __________ 2 HUB ASSY (Inc. 6, 12) ___ _ __ _ _ _______ 2 PLUG, Hub Filler __ _ _ _ _ __ __________ 2 GEAR, Internal ___ _ ___________ _____ _ _________ 2

PLANET CARRIER ASSY - (See Index) BOLT, Planet Puller Hole ______ ____________ 4

LKWSHR, Planet Puller Hole _ ___________ 4 LKWSHR, Thrust Cap ______________________ 12 BOLT, Thrust Cap ________ --· ________ 12 NUT, Inner Spindle ___ __________ _____________ 2 NUT, Outer Spindle ___ ___ ______________ _____ 2

PLUG, Oil Level ---------------------- ___________ 2

GEAR, Sun ----------------------------------------- 2 CAP, Sun Gear Thrust (Inc. 77 A) ______ _ 2

tVAL VE, Relief ____________________ ______________ l

OMIT GASKET-Use Perma-Tex No. 2 BOLT, Internal Gear to Hub ________________ 16 DIFF. & CARRIER ASSY - (See Index)

tNot Illustrated :j:As Required

PM 2726


85.1

~ mm:ml CONSTRUCTION MACHINERY DIVISION -

5 f ' JI

n 11 Q 15 Ii 17

\ I I \ \ ! I I

I I I I

'·

r I ... I

42 41 "' 33 32 l1 2521 2)2!i

TS-2762-P

AXLE ASSEMBLY - REAR STEERING - MODEL 75B For Serial: 6123 thru 6127, 6129 thru 6133, 6135 thru 6138, 6140 thru 6143, 6146, 6147, 6148, 6150,

6153, 6154, 6156, 6160, 6161, 6164, 6166, 6169, 6170, 6176 thru 6179

Item No.

A 1 2 2A 3 4 5 6 7 8 9 9A

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Part No.

130144

103928 103927 666553 711120 l 2F-200 103929 103228 103166 2D-08 4E-08 103165 2C-836 106166 103227 106167 100323 100575 1 F-428 100588 675246 672070 223878 672070 675246 103953 103954 4E-10 1C-1048 103952


* AXLE ASSY (Inc. 2 thru 54) ............. . WHEEL - (See Index) ..................... . KNUCKLE, Steering - L.H. .................. 1 KNUCKLE, Steering - R.H. ...... ......... 1 BEARING, Knuckle Thrust . .. .. ........... 2 BEARING, Steering Knuckle Pin ........ 4 PLUG, Axle Center Expansion ..... ..... 4 PIN, Knuckle . . ............. ..... .. 2 END ASSY, Tie Rod - R.H. (Inc. 8, 33) 2 COVER, Tie Rod End ........................ 4 NUT, Tie Rod Clamp Bolt .. .. ... .......... 4

t LKWSHR, Tie Rod Clamp Bolt .. 4 CLAMP, Tie Rod End . 4 SOLT, Tie Rod Clamp . 4 TIE ROD ..... ... .. . ............ 2 END ASSY, Tie Rod - L.H. (Inc. 8, 33) 2 SPIDER, Steering 1 CAP, Spider Hub Grease ... 1 NUT, Steering Spider 1 COTTER, Steering Spider Nut .. 1 WASHER, Steering Spider . 1 CONE, Spider Bearing ..... 1 CUP, Spider Bearing 1 RING, Bearing Retaining . 2 CUP, Spider Bearing 1 CONE, Spider Bearing 1 FELT, Spider l CUP, Spider Felt ............. 1 LKWSHR, Bearing Cap ........ . ... . ...... 8 SOLT, Bearing Cap ........................... 8 PIN, Steering Arm Pin Lock ...... ......... l

Item No.

29 30

31 32 33 34 35 36 36A 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

Part No.

106528 107609

15H-1 1 F-416 40-10 103942 11 H-1 2D-06 4E-06 102594 103935 654042 710037 654167 106160 654139 102251 4D-20 l F-632 103188 6E-06 lC-614 103522 103445 121062 13G-820 7D-08


PIN, Steering Arm *CENTER ASSY, Axle (Inc. 4, 26 thru

29) FITTING, Tie Rod End Grease COTTER, Tie Rod End NUT, Tie Rod End

tSHIM, Steering Knuckle FITTING, Knuckle Pin Grease . NUT, Knuckle Pin Draw Key

tLKWSHR, Knuckle Pin Draw Key KEY, Knuckle Pin Drow .... . SEAL, Inner Hub Oil ... . CONE, Inner Hub Bearing . CUP, Inner Hub Bearing . CUP, Outer Hub Bearing HUB ASSY (Inc. 40, 41 47 thru 52) . CONE, Outer Hub Bearing WASHER, Hub Bearing NUT, Hub Bearing ..... COTTER, Hub Bearing Nut CAP, Hub Grease ..... LKWSHR, Grease Cap SOLT, Grease Cap ....

l 4 4 4

4 4 4 4 2 2 2 2 2 2 2 2 2 2

10 10

NUT, Wheel . STUD, Wheel . NUT, Wheel Stud .

12 ............... 12

12 tSCREW, Knuckle Stop ............ ...... . . 2 tNUT, Knuckle Stop Screw .. ............... 2

*NOTE: l 07609 Axle Center Kit is ovoiloble to convert 130144 Axle Assy into 130151. After l 07609 Kit hos been installed use 130151 Axle parts list on page 87 when subsequent replacement parts are required. For rephcement of 130144 use 130151.

tNot Illustrated :j:As Required


86.1 PM 2726

~ ~

43

42

41'

40 39


5 I 7 I 9 10 11 12 13 14 15

\F~ lr~--( I

------; I L

37 36 35 34 33 32 31 30 29

AXLE ASSEMBLY - REAR STEERING - MODEL 75B

-

27

28 TS-1905-P

For Serial: 6128, 6134, 6139, 6144, 6145, 6149, 6151, 6152, 6155, 6157, 6158, 6159, 6162, 6163, 6165, 6167, 6168, 6171 thru 6175, 6177, 6178, 6180 and thereafter

Item No.

Port No.

A 130151

1 2 103928 2A 103927 2S 13G-820 2C 7D-08 3 666553 4 711120 5 12F-200 6 103929 7 103227 8 103166 9 l 5H- l

10 103165 11 20-08 12 2C-836 12A 4E-08 13 106165

13A 106166 14 107447

15 103228

16 107450

17 100323 18 100575 19 1 F-428 20 100588 21 675246

Description

REAR STEERING AXLE ASSY

Ne. lleq'd.

(Inc. 2 thru 49) ________ -·----··-·----·-·--·· WHEEL ASSY - (See Index) _ _ ________ _ KNUCKLE - L.H. Steering ______ ______ ____ 1 KNUCKLE - R.H. Steering __ ··-· ----·-· l

tSCREW, Knuckle Stop ____ .-- . 2 tNUT, Knuckle Stop Screw ___ ·-· ________ 2

BEARING, Knuckle Thrust ____ __ -···---- 2 BEARING, Knuckle Pin -····· . _ --·--· _____ 4 PLUG, Axle Center Expansion __ ________ 4 PIN, Knuckle _ ··-···-·· ·----------·· __ . 2 END ASSY, Tie R~d - L.H. (Inc. 8, 30) 2 COVER, Tie Rod End Ball .... 4 FITTING, Tie Rod End Grease __ _________ 4 CLAMP, Tie Rod ---------------------------·----- 4 NUT, Tie Rod Clamp Bolt __________________ 4 BOLT, Tie Rod Clamp _ ____ ___________ __ 4 LKWSHR, Tie Rod Clamp Bolt 4 TIE ROD ASSY (Inc. 7, 8, 10 thru 12A,

13A, 15, 30) __ 2 TIE ROD _ _ _________ ------------· . _________ 2 AXLE CENTER ASSY

(Inc. 4, 26, 27, 28) -----------·------·-···· END ASSY, Tie Rod - R.H.

(Inc. 8, 30) _ ----------------------------------·· 2 SPIDER & CUP ASSY, Steering

(Inc. 22, 23) --------····-·---------------------- 1 CAP, Spider Hub Grease -----·· __ ________ 1 NUT, Spider ___ -----·-------- ·-·· _ . __ ·---····· l COTTER, Spider Nut --------------·----------- 1 WASHER, Spider __ _ ________ ----------··-·--- 1 CONE, Spider Bearing - Upper --·-· __ 1

tNot lllustroted tAs Required

PM 2726 87.1

Item No.

22 23 24 25 26 27 28 29 30 31 32 33 33A 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49

Part No.

672070 654167 654139 107461 107449 4E-10 1C-1048 1 F-416 40-10 103942 11 H-1 20-06 4E-06 102594 103935 654042 710037 106160 654167 654139 102251 4D-20 1 F-632 103188 6E-06 lC-614 103522 103445 121062


CUP, Spider Bearing - Upper . . 1 CUP, Spider Bearing - Lower ___________ 1 CONE, Spider Bearing - Lower ________ 1 SEAL, Spider ______________ ·-·--· ... .. _ _____ 1 PIN, Steering Arm -·-----·------------------- 1 LKWSHR, Axle Center Brg. Mtg. Cap 8 BOLT, Axle Center Brg. Mtg. Cap ______ 8 COTTER, Tie Rod End _ . _ -·-··-··-·------ 4 NUT, Tie Rod End __ ___ ___ ___ _____ 4

;SHIM, Knuckle ___ _ _______________________ _

FITTING, Knuckle Pin Grease _ ·----·--· 4 NUT, Knuckle Pin Draw Key-----·--·------ 4 LKWSHR, Knuckle Pin Draw Key ________ 4 KEY, Knuckle Pin Draw _____ ··--·----------- 4 SEAL, Inner Hub Oil ··------------ 2 CONE, Inner Hub Bearing _____ .. _________ 2 CUP, Inner Hub Bearing _________ ··------- 2 HUB ASSY (Inc. 37, 39, 44 thru 49) ___ 2 CUP, Outer Hub Bearing _______ ··-·---·-- 2 CONE, Outer Hub Bearing ....... ······-- 2 WASHER, Knuckle ___ .. ·····-·· 2 NUT, Knuckle .... ______ .......... ······----· 2 COTTER, Knuckle . _ . .. ........ 2 CAP, Hub Grease __________ 2

LKWSHR, Hub Grease Cap 10 BOLT, Hub Grease Cap 10

NUT, Wheel······-----·-----···--· ... ····--------- 12 STUD, Wheel Mount __ . 12 NUT, Wheel Stud .... .. 12

1 2 3 6

~\

15

40 41 17

42 43

33

30

19 20

21 22

23 24

I t'\

0 z VI ... :ii:,

C: t'\ ... -0 z

0 -< -VI -0 z

i~~~~~~~~~~~~D:IFF~ER~EN~T~IA~L~A~ND~CA~R~RIE~R~A~SS~E~MB~LY'.__~~~=====-~~~~~ I "tJ

~ tm!Itm CONSTRUCTION MACHINERY DIVISION -DIFFERENTIAL AND CARRIER ASSEMBLY Item No.

A

Part No.

B 815576

C 815509

2

3

100937

111656

4 100171

5 100941

6 100173


DIFF. & CARRIER ASSY (Inc. thru 34, 37 thru 47)

Front Drive

Rear Drive Steer _____ ---··· ____ . _________ _

BOLT, Differential Carrier Cop -·-······ 4

WASHER, Differential Carrier Cop ... 4

§CAP, Differential Carrier - (See 37) _ 2

SPIDER, Differential .. ··-·-·-·-·-·············

LOCK, Differential Adjusting Nut --···· 2

WASHER, Side Gear Thrust 2

7 100176 BOLT, Ring Gear ..... ····-······ 12

8 §CASE, Diff. - Flanged Half (See 51) ..

9 100174 BOLT, Differential Cose

10 104182 NUT, Ring Gear ....... .

11 §GEAR, Ring - (See 50)

12 OMIT, Not used in this application ..... .

13 OMIT, Not used in this application ..... .

8

12

14 OM IT, Not used in this application ...... -

15

16 667278

17 815040

18 7102'88

19

20

21

111720

100945

100949

§PINION, Differential - (See 50) ....... .

CUP, Center Pinion Bearing -·-·

SPACER, Pinion Bearing ....... .

CONE, Outer Pinion Bearing .

SEAL, Pinion Oil

GASKET, Pinion Oil Seal ··-·· ··--· ·-···

DEFLECTOR, Pinion Dust -·······

22 106081 FLANGE, Companion .............. .

23 119298 WASHER, Pinion Shaft ··········-· _ . _____ _

24 1 F-428 CO TIER, Pinion Shaft Nut _ _ __ __ __ .

25 100950

26 lC-928

26A lC-828

27 4E-09

27A 4E-08

28 100942

29 112353

30 675257

;As Required

NUT, Pinion Shaft .. ·-· ___ .

BOLT, Oil Seal Retainer ·-··· ··-········· 5

BOLT, Oil Seal Retainer Locating ..... .

LKWSHR, Oil Seal Retainer ............. ... 5

LKWSHR, Oil Seal Retainer Locating _

RETAINER, Pinion Oil Seal _ . ·-

GASKET, Oil Seal Retainer ........ .

CUP, Outer Pinion Bearing ··-·· ......... .

§Not Sold Separately *NOTE: 815744 Kit consists of 4 - 100169 Pinions.

Item No.

Part No.

31 100938

32 667277

33 675536

34

34A 112354

Description

CAGE ASSY, Pinion Brg. (Inc. 30) .

CONE, Center Pinion Bearing .

BEARING, Inner Pinion ..

SHIM, Pinion Bearing Cage

tSHIM - .004"

No. Req'd.

34B 125576 tSHIM - .007"

34C 125577 tSHIM - .010"

35 l C-722 BOLT, Carrier to Axle - 71,/' x 13/a" __ . 6

35A 1 C-728 BOLT, Carrier to Axle - 71,(' x l %" ··-· 8

35B lC-732

36 4E-07

BOLT, Carrier to Axle - 71,(' x 2"

LKWSHR, Carrier to Axle - 71,(' . 14

37 815512 CARRIER ASSY (Inc. 1, 2, 3).

38 815744

39 100172

40 100170

41

42 104182

43 675249

44 100940

45 675248

46

47

4E-06

3C-614

*PINION KIT, Differential

WASHER, Differential Pinion Thrust_ 4

GEAR, Differential Side .. 2

§CASE, Diff. - Plain Half (See 51) .

NUT, Differential Case ..... ··-····

CUP, Differential Bearing ..... .

NUT, Differential Adjusting .. .

CONE, Differential Bearing ..... .

LKWSHR, Adjusting Nut Lock _

BOLT, Adjusting Nut lock .

8

2

2

2

2

.. 2

48 DIFFERENTIAL ASSY (Inc. 4, 6 thru 11, 15, 38 thru 42)

48A 124443 Front Drive .....

48B 124995 Rear Drive

49 100160

50

50A 815202

50B 815204

51 815203

DIFF. BODY SUB-ASSY (Inc. 4, 6, 8, 9, l 0, 38 thru 42) .. .. . ...... _ .. .

GEAR & PINION SET (Inc. 11, 15)

Front Drive

Rear Drive

DIFF. CASE KIT (Inc. 8, 41) .. _. -··· l


PM 2726 .. 89.2

~ D!!!!C:ttD

16 15


-1 {[) I I I L_I

14 13 12 11

TS-1138-P

PROPELLER SHAFT- TRANSMISSION TO AXLES- WAUKESHA Item No.

A

B

C

2

3

3A

3B

4

5

6

7

8

9

10

11

12

13

14

15

16

Part No.

550580

550778

940089

944862

940084 940230

8D-06

940090

940091

940093 8D-06

944862

940089

lOH-35

lOH-25

940092

940089

lOH-35

8D-06

Description

PROP SHAFT ASSY (Inc. 1 thru 16)

*For 75A and 758 ----------·--····

For 75R .......... ····-·····-··· ···········- ___ ... _ ------------------------ _

Quantities listed below are for 1 Prop Shaft.

BOLT, Spider & Bearing to Tube __ .

SPIDER & BEARING (Inc. 2A)

TUBE For 75A and 758 _______ _

For 7 5R . _____ .... __

No. Req'd.

2

1

4

NUT, Spider & Bearing to Tube ___ . ______________ .. ____ ------------------------ ___________ 4

RET Al NER, Felt -------------------------- ...... ------------------------------------------------------· _____________________ 1

WASHER, Felt Retainer ____________ .... __________________ -------------·----- __ ... ____________ . _ . ..... ... 2

SLIP YOKE ------------------ ____ ---------------------------. -------------------------- -------- ....... ..

NUT, Spider & Bearing to Slip Yoke _________ ·------ ______ --------·------ -------------- -------------- 4

SPIDER & BEARING (Inc. 9A) ----------·--·· .. ___________ ..... . 1

BOLT, Spider & Bearing to Slip Yoke .... _____ .... _____________________ .. _____ . 4

FITIING, Spider & Bearing Grease .... ------------------· ____________________________ _

FITIING, Slip Yoke Grease . ______________________ --------------- _____________ ____ _ ___________________ _

WASH ER, Felt _________ ... ----------------------------------------------- ______________________ . ____________________ _

BOLT, Spider & Bearing Attaching ······-- ·----------------- . _______________ ----·-·· .... 8

FITIING, Spider & Bearing Grease _______ .. __ . ________ ..... __________ _

NUT, Spider & Bearing Attaching -------------------------- _______ .. 8

*NOTE: Quantity required this item for 75B is one. tNot Illustrated


90.1 PM 2726

I

~ ~


Item No.

A

1A

2

2A

3

4

5

6

7

8

9

9A

2 5

16 15 14 13 12

PROPELLER SHAFT ASSEMBLY -G.M. ' Column 1 :' Converter to Transmission Column 2: Transmission to Axles (2 Required)

Description No. Req'd.

PRO FELLER SHAFT ASSY (Inc. l thru 16) _____________________________ -----------------------

BOLT, Spider & Bearing to Tube ---------------------------------------------------------------- 4

tLKWSHR, Spider & Bearing to Tube____________________________________________________________ 4

SPIDER & BEARING (Inc. 2A) __________________ ---------------·--------------------------------

tSEAL, Spider & Bearing Grease_______________________________________________________________ 4

TUBE · --··--·-- __ . --------------------- --·-------- _ -------------------------------------------------------------

NUT, Spider & Bearing to Tube __________________________ ------------------------------------ 4

RET Al NER, Felt ___________________________ ------------------------------ ----------------------------------:c.--

WASHER, Felt Retainer __________ ----------------------- _________ ------------------------------------- 2

SLIP YOKE ________ ---------------------------- ___ ----------------------------------------------------------

NUT, Spider & Bearing to Slip Yoke ___________ -------·---------------·-------------------- 4

SPIDER & BEARING (Inc. 9A) _______________________________________________________________________ _

tSEAL, Spider & Bearing Grease _________________ ----------------------------------------------- 4

10 BOLT, Spider & Bearing to Slip Yoke____________________________________________________________ 4

1 OA tLKWSHR, Spider & Bearing to Slip Yoke ___ ---------------------------------------------- 4

11 FITTING, Spider Grease ------------------·----- ________ -------------------------------------------

12 FITTING, Slip Yoke Grease ---------·-------------------- _____________ -------------------------

13 WASHER, Felt -----------------. ------------------ ---------------- ---------------------------- -------------- 1

14 BOLT, Spider & Bearing Attaching ------------------------------------------------------------ 8

14A tLKWSHR, Spider & Bearing Attaching ______________________________________ ·_______________ 8

15 FITTING, Spider Grease _ -------,- ____ ----------------------------- -------------------------------

16 NUT, Spider & Bearing Attaching --------------------------------------------------------------- 8

t Not Illustrated

1.

529850

695811

4E-06

946067

944863

944670

OMIT

940654

940653

944868

OMIT

946067

944863

695811

4E-06

lOH-25

lOH-25

940081

695811

.4E-06

lOH-25

OMIT

-

11 TS-1138-P

2.

55058(

9.4008~

OMIT

94486

94008

8D-06

94009

94009

94009

8D-06

9448E

9400E

OMIT

lOH-2

lOH-2

9400S

9400E

OMIT

lOH-~

8D-Ot

PM 2726


91.2

~ ~

17 16


15 14 13

PROPELLER SHAFT- ENGINE TO TRANSMISSION-WAUKESHA -

COLUMN 1 ........ For Serial 75A - 8123 thru 10222, 10240 & 10247 thru 10251 758 - 6123 thru 6200 75R- 7123 thru 7154

Ill

12

TS-2596-P

COLUMN 2 ..... For Serial 75A GAS - 10223 thru 10239, l 0241 thru 10246, 10252 thru 12183, l CA3 l 70 & thereafter 75A DIESEL - l 0223 thru 12183, 1 CB893 & thereafter

758 -6201 thru 6270 75R - 7155 thru 7184

Item No. DESCRIPTION No. Req'd. Column 1 Column 2

A PROPELLER SHAFT ASSY (Inc. 1 thru 17) _________________________________ _ 550579 514268 1 FLANGE - See Converter & Transmission Listings _____ , _____________ _ 2 SPIDER & BEARING (Inc. 2A) __________________________________________________ _ 946067 946067 2A tSEAL, Spider & Bearing Grease__________________________________________________ 4 944863 944863

3 STUB YOKE ------------------------------------------------------------------------------ 940085 942659 4 LKWSHR, Spider to Stub Yoke__________________________________________________ 4 4E-05 4E-05 5 BOLT, Spider to Stub yoke________________________________________________________ 4 695811 695811

6 RETAINER, Felt ------------------------------------------------- ____ ------------------ 1 940080 940654

7 WASHER, Felt Retainer -------------------------------------------------------------- 2 940653 8 BOLT, Spider to Slip Yoke--------------------------------------------------------- 4 695811 695811 9 LKWSHR, Spider to Slip Yoke____________________________________________________ 4 4E-05 4E-05

1 0 SLIP YO KE _____________ --------------------------------- ----------------------------------- 940082 944868 11 SPIDER & BEARING (Inc. 11 A) __________________________________________________ _ 946067 946067 11 A tSEAL, Spider & Bearing Grease________________________________________________ 4 944863 944863

12 FITIING, Spider Grease ----------------------------------------------------------- lOH-35 lOH-35

13 FITIING, Slip Yoke Grease -------------------------------------------------------- lOH-25 lOH-25

14 WASHER, Felt ---------------------------------------------------------------------------- 940081 940081

15 FITIING, Spider Grease ----------------------------------------------------------- lOH-35 lOH-35

16 LKWSHR, Spider Attaching -------------------------------------------------------- 8 4E-05 4E-05

17 BOLT, Spider Attaching ------------------------------------------------------------ 8 695811 695811

tNot Illustrated


92.1 PM 2726

~ IIm:ttl

Item No.

l 2 3 4 5 6

7 7A 78

8 9

10 11 12 13 14 15 16 17 18

? '/


~Jj 6

7

a

9

12

I \ /

J-/'/r/ '/"',/ \

\ \

\ \

'

11 17 16 15 14 13

BRAKE LINES For Serial: 75A - 8123 thru 8609

758- 6123 thru 6270 75R- 7123 thru 7183

Part No. No. De1cription Req'd.

552382 LINE, Broke - Moster Cylinder ta Transmission ............. . .......................... . 613750 GASKET, Copper - Inner Wheel Cylinder ....................................................... . 620235 FITTING, Wheel Cylinder ..... .................. ... ...... ......... . ............................ . 620238 GASKET, Copper - Outer Wheel Cylinder ........................................................ . 692722 BOLT, Wheel Cylinder Fitting ........... ........ ................ .... . ............ . ............. . 550405 LINE, Tee to Left Wheel Broke .................... .............. . ......... .

LINE, Broke - Moster Cylinder to Axle Tee 552383 For 75A & 758 only ...... ....... ............................................................ .. . ............... . 550407 For 75R only ............................................................................... ....... .............. . ..

609733 TEE, Axle Broke Lines ..... ...... . . .... . . .. .................... ... .. . .. ............. ........ l 692722 BOLT, Wheel Cylinder Fitting ................ .............................. ................... ....... ... ........ l 620238 GASKET, Copper - Outer Wheel Cylinder .... ..................................... ........... l 620235 FITTING, Wheel Cylinder ................................................. ........................... ............ l 613750 GASKET, Copper - Inner Wheel Cylinder ...... ................ ........... ............. ... ....... ....... l 550404 LINE, Broke - Tee to Right Wheel Brake ........ ................. .. .................. ..... l 613750 GASKET, Copper - Inner Master Cylinder .............. ........... ......... .. .. . ....... .. . l 633242 FITTING, Master Cylinder ..................................................... ........ ........... ................ . l 620238 GASKET, Copper - Outer Master Cylinder ................... . ............ ....... . . .. l 692722 BOLT, Master Cylinder Fitting ...... ....................................................................... ...... l 62F-3 ELBOW, Line to Transmission ....................................................... ......................... l

PM 2726

WHEN ORDERING PARTS, _ALWAYS STATE MODEL AND SERIAL NO. OF MACHINE

93

~ ~

Item No.

1 2 3 4 5

6 6A 6B

7 8 9

10 11 12 13 14 L5

Part No.

550325 8D-10 613750 620235 620238

518173 552387

692722 552374 8D-10 552386 2C-616 6H-4 552384 552382 552383

CONSTRUCTION MACHINERY DIVISION -3 4 6 7 a s 10 11 12 13 14

41 38 37 36 35 34 TS-2063-P

BRAKE LINES - 75A For Serial: GAS - 8610 thru 12183, 1 CA3170 and therafter

DIESEL - 8610D thru 12183D, 1CB893 and thereafter


CLIP, Brake Hose ___________ ----------------- 1 NUT, Clip to Hose _______ ---------------------- 1 GASKET, Copper - I.Iner Wheel Cyl. 2 FITTING, Wheel Cylinder _________________ 2 GASKET, Copper - Outer Wheel Cyl. 2

LINE, Brake - Frame to Wheel Cy/. For Serial Group "A" Below ______________ For Serial Group "B" Below ______________

SOLT, Wheel Cylinder Fitting ____________ 2 HOSE, Brake ________ --------------------------- 1 NUT, Brake Hose _ ------------------------------ 1 LINE, Brake - Tee to Brake Hose________ 1 BOLT, Clip Attaching . ______________________ 1 CLIP, Brake Line -------------------------------- 1 LINE, Brake-Master Cyl. to Rear Axle 1 LINE, Master Cyl. to Trans mission ______ 1 LINE, Brake - Master Cyl. to Front

Axle ______ ------------------------------------·

,,em Part No. No.

25 613750 26 552264 27 620238 28 692722 :;!9 62F-3 30 4E-06 31 2D-06 32 8D-10 33 550324

34 34A 518173 34B 552387

8D-10 550325 552374 8D-10 552385 550320


GASKET, Copper - Inner Master Cyl. FITTING, Master Cylinder _________________ _ GASKET, Copper - Outer Master Cyl. BOLT, Master Cylinder Fitting __________ _ ELBOW, Line to Transmission _________ _ LKWSHR, Clip Attaching ___________ _ ____ _ NUT, Clip Attaching ______________________ _ NUT, Brake Hose ____ _ _______________________ _ HOSE, Line to Axle Tee _______________ _

LINE, Brake - Frame to Wheel Cy/. For Serial Group "A" Below ___________ _ For Serial Group "B" Below

NUT, Brake Hose _____________ _ CLIP, Brake Hos?. _________________________ _ HOSE, Brake ___ _____ __ ____ _____ _ _______ _ NUT, Brake Hose ______ .. ___________________ _ LINE, Brake - Tee to Brake Hose TEE, Rear Axle Brake Line ___ _

16 17 18 19 20 21 22 23 24

609733 TEE, Front Axle Brake Lines ______________ _

35 36 37 38 39 40 41 REAR AXLE - (See Index) ____ _

550404 692722 620238 620235 613750 550405

FRONT AXLE - (See Index) --·--·---·-·--·· LINE, Brake - Tee to Right Whee! Cyl. 1 Serial Group "A": BOLT, Wheel Cylinder Fitting _______ ____ 2 10593 thru 10640, 10643 thru 10648

GASKET, Copper - Outer Wheel Cyl. 2 Serial Group "B": FITTING, Wheel Cylinder - -------·--·-·· 2 GAS-8610 thru 10592, 10641, 10642, 10649 thru 12183, GASKET, Copper - Inner Wheel Cyl. 2 1CA3170 and thereafter LINE, Brake - Tee to Left Wheel Cyl. 1 DIESEL- 86100 thru 105920, 106410, 106420, 106490 thru BRAKE MASTER CYL. - (See Index)-·- 12183D, 1CB893 and thereafter


94 PM 2726

r=rnm r.mm:mm

PM 2726

CONSTRUCTION MACHINERY DIVISION -NOTES

95

r.:rrn.1 ~

c-.,

0,

-,....

c.o

&n

-...,

C-0,


I I

I /·

I I

/

I /--/ I

I " " I

96

-

.... N

ti)

0 ~ <( 0 ca ~

0 0 ...J LL.

Q z <(

ti) - ...J

C") 0 ~ I-z 0 u w ::.:::: <( ~

&n C")

ca

c.o C")

.... ...,

PM 2726

CONSTRUCTION MACHINERY DIVISION -BRAKE CONTROLS AND FLOORBOARDS Item No.

Part No.

25E-16

2 2C-616


WASHER, Floorboard to Frame_________ 2

BOLT, Floorboard to Frame _ ____ ____ _ 2

3 FLOORBOARD, Front

3A 550748

38 550631

4 14D-10

5 13E-10

6 302568

7 616775

For Machines with Mechanical Starter

For Machines with Solenoid Starter __ _

NUT, Bumper to Floorboard _ 2

LKWSHR, Bumper to Floorboard 2

BUMPER, Brake Pedal 2

WASHER, Bumper to Floorboard_____ 2

8 2G-1010 SCREW, Bumper to Floorboard _ 2

9 550299

10 2C-640

11 4E-06

12 20-06

13 526767

14 550292

15 526767

16 llH-15

17 2C-616

18 2D-06

19 4E-06

20 4E-06

21 20-06

SHAFT, Brake Pedal __

BOLT, Shaft Retaining

LKWSHR, Shaft Retaining

NUT, Shaft Retaining

BUSHING, Broke Pedal

PEDAL, Brake

BUSHING, Brake Pedal __

FITIING, Brake Pedal Grease

BOLT, Floorboard to Brocket

NUT, Floorboard to Floorboard

LKWSHR, Floorboard to Floorboard

LKWSHR, Floorboard to Bracket __ _

NUT, Floorboard to Bracket _

2

4

4

2

2

22 550632 BRACKET, Floorboard Support _______ __ 2

- 23 2D-06

24 4E-06

25 2C-620

tNot Illustrated

NUT, Bracket to Frame

LKWSHR, Bracket to Frame

BOLT, Bracket to Frame

Serial Group "A": 75A - 8123 thru 8609 75B- 6123 thru 6270 75B- 7123 thru 7183

2

2

2

Item No.

Part No.

26 25E-16

27 2C-616


WASHER, Floorboard to Floorboard _ 4

BOLT, Floorboard to Floorboard ______ 4

28 4F-08127 PIN, Clevis to Pedal __ ________ _ ____________ _

29 1 F-412

30 552377

31 20-06

32 4E-06

33 8D-07

34 20-07

35 4E-07

36

36A 550985

36B 552373

COTIER, Clevis Pin _________________________ _

ROD ASSY, Master Cylinder Push __

NUT, Floorboard to Frame ________________ 2

LKWSHR, Floorboard to Frame _______ __ 2

NUT, Push Rod Jam --------------------------

NUT, Cylinder to Floorboard _____ _

LKWSHR, Cylinder to Floorboard ____ _

CYLINDER, Brake Master

For Serial Group "A" Below __ _

For Serial Group "B" Below

36C tREPAIR KIT, Master Cylinder

36D 858317 For Serial Group "A" Below _____ _

36E 869449 For Serial Group "B" Below ______ -______ _

37 550301

38 2C-760

39 4E-06

4-0 lC-614

41

41A 550626

41B 552375

42 25E-16

43 4E-06

44- 1 C-612

SPRING, Pedal Return _____________ _

BOLT, Cylinder to Floorboard ___ _

LKWSHR, Cylinder to Floorboard __ _

BOLT, Cylinder to Floorboard ___________ _

FLOORBOARD, Rea~

For Serial Group "A" Below _

For Serial Group "B" Below _

WASHER, Rear Floorboard to Frame__ 3

LKWSHR, Rear Floorboard to Frame__ 3

BOLT, Rear Floorboard to Frame __ _ _ 3

Serial Group "B": 75A - GAS - 8610 thru 12183, 1 CA3170 and thereafter 75A DIESEL-86100 thru 121830, 1CB893 and thereafter

PM 2726


97.1

~ tm!ttm CON.ST RUCTION MA CH INER Y DIVISION -

3 4 6 7 8 9 10 11 12 13 14 15

"~. 17

\~" 29 28 27 26 25 21 20 19 TS-1739-P

BRAKE ASSEMBLY - FRONT Item No.


No. Req'd.

A BRAKE ASSY (Inc. 1 thru 29) B 110929 Right Hand ---------------------------------·· C 110930 Left Hand ·--···-···--···-··--·-·-·--········ 1 NOTE: 2 brake assemblies used on axle - Quantities

listed below are for 1 brake assembly. 1 1 C-610 BOLT, Cylinder to Brake Disc-··--·- 2 2 4E-06 LKWSHR, Cylinder to Brake Disc···-- 2 3 114169 PIN ASSY, Cam (Inc. 4) ·-··-··--··--···- 2 4 100867 WASHER, Cam Pin··-·-··-··-·-------· 2

5

5A 106337 58 106338 SC 120198 6 106373 7 106180 8 1 H-410 9 100864

10 107014 11 104524 12 106185 13 106526 14 10232:.Z 15 100878 16 118254

DISC ASSY, Brake (Inc. 3, 4, 6, 9, 25,26, 27)

Right Hand --·-··--·---··--··-··-·-- 1 Left Hand ·---···----·-·---··--------· 1

tCOVER, Adjusting Hole--····-·······---· 4 PIN, Guide··-··-·--·---··--···---·-·-- 4 SUPPORT, Parking Brake Link·······- 1 RIVET, Link Support··--·-·······-···-·-· 4 CAM, Shoe Adjusting ·······-----------·- 2 CYLINDER ASSY, Wheel (Inc. 24) .. 1 SH IE LO, Link Dust ---··-····-··--··-·-· 1 SPRING, Link-··---------·--··-···· 1 LINK, Parking Brake·------··-·-··- 1 WASHER, Guide Pin-·-···-·-··--··- 8 "C" WASHER, Guide Pin-------·-···-- 4 SHOE ASSY, Brake (Inc. 21, 22, 23). 2

Item No.

17

Part No.

l7A 101332 17B 100613

l 8 106970

19 19A 106969 l9B 940367

20 106216 21 201966 22 944217

23 23A 106184 23B 3H-1216

24 958553 25 943859 26 851771 27 106179 28 4E- l2 29 20-12

No. Description Req'd,

"C" WASHER, Anchor Pin For "C" Washers witli 1YJ/' opening__ 2 For "C" Washers with 'l"a" opening ____ 2

STRUT, Anchor Pin _____ _ ________ _

PIN, Broke Shoe Anchor For Anchor Pins 4Yi,' long __________ 2

*For Anchor Pins 3'i"a" long __________________ 2

SPRING, Brake Shoe Return ______________ 1 BUSHING, Brake Shoe ______________________ 2 LINING KIT, Brake Shoe (Inc. 23B) ____ 2

RIVET, Lining to Shoe %," - For Shoes with o/.i2" rivet holes ___ 36 o/i,' - For Shoes with '%," rivet holes __ 36

LINK, Wheel Cylinder Connector ______ 2 SPRING ASSY, Com (Inc. 26) ___________ 2 WASHER, Cam Spring _________________ _____ 2 SUPPORT, Parking Brake Link ____________ l LKWSHR, Anchor Pin ________________________ 2 NUT, Anchor Pin _________________________ 2

*NOTE: 940367 Anchor Pin Kit includes 17A, 18 and 19A to convert machines with 3'i'e" Anchor Pins to 4~~.'', tNot Illustrated


98 PM 2726

~ r.mmtttD CONSTRUCTION MACHINERY DIVISION Ill

2 3 4 5

~J 22--7~12, 21

20

19

18

6 7 8

/

9

/ /

10 11

BRAKE ASSEMBLY - REAR Item No.

Part No.

A 120505

Description No.

Req'd.

BRAKE ASSY {Inc. 1 thru 22) -------- 2

NOTE: 2 brake assemblies used on axle - Quantities listed below are for 1 brake assembly.

1C-510 2 4E-05 3 114170 4 100867 5 106817 5A 120198 6 943859 6A 851771 7 100877 8 100864 9 124214

9A 853405 10 100879

tNot Illustrated

BOLT, Cylinder to Brake Disc-------- 2 LKWSHR, Cylinder to Brake Disc --- 2 PIN ASSY, Cam (Inc. 4) -------------- 2 WASHER, Cam Pin------------------- 2 DISC ASSY, Brake (Inc. 3, 4, 6, 7, 8)

tCOVER, Adjusting Hole------------------ 4 SPRING, Cam (Inc. 6A) ------------- 2

tWASHER, Cam Spring------------------ 4 PIN, Guide--------------------------- 2 CAM, Brake Shoe Adjusting --------- 2 CYLINDER ASSY, Wheel (Inc. 20) -- 1

tREPAIR KIT, Wheel Cylinder----- 1 SPRING, Brake Shoe Return------- 1

Item No.

Part No.

11 102322

12 120507

13 102322

14 100878

15 100613

16 102498

17 102497

18

18A 106184

18B 3H-1214

19 944216

20 853402

21 6E-12

22 2D-12

12 13 14

17 16 15

TS-2577-P


WASHER, Guide Pin ______________ 2

SHOE ASSY, Brake (Inc. 17, 19) _ ___ _ 2

WASHER, Guide Pin __ __ __ _ _______ 2

"C" WASHER, Guide Pin ------------------ _ 2

"C" WASHER, Anchor Pin ________ 2 PIN, Anchor __________ _ _________________ __________ 2

BUSHING, Brake Shoe _________ 2

RIVET, Lining to Shoe

%/' - For Shoes with %," rivet holes __ 24

'II/' - For Shoes with 1%/' rivet holes _ 24

LINING KIT, Brake Shoe (Inc. l 8B)__ _ 2

LINK, Wheel Cylinder Connector ______ 2

LKWSHR, Anchor Pin __ __ _______ _ _ _____ 2

NUT, Anchor Pin ___________ ________ _ 2


PM 2726 99.1

~ ~

CONSTRUCTION MACHINERY DIVISION -2 3

27 26 25 24 23 22 21 20 19 18

PARKING BRAKE CONTROLS Item No.

l lA lB 2 3 4 5 6

- 7 8 9

10 11 12 13 14 15

16

Part No.

2C-524 20-05 4E-05

619016 4F-04051 l F-208 4F-06106 l F-312 8D-06 104645 4E-05 l C-510 2C-616 551834 4E-06 20-06

16A 551689 16B 551746

Description No.

Req'd.

BOLT, Lever to Frame -------------------- 4 NUT, Lever to Frame ------------------------ _ 4-LKWSHR, lever to Frame _________________ _ 4 LEVER, Parking Brake (See Index)___ 1 WASHER, Clevis Pin------------------- 2 PIN, Coble to Lever __ 2 COTTER, Coble to Lever _______________ ____ 2 PIN, Clevis to Brake Lever _______ --------· l COTTER, Clevis Pin ___________________ ________ 1 NUT, Clevis Jam ____ _ l BRACKET, Coble ______ ------ ____ ___________ 1 LKWSHR, Cable Bracket ------·-------·-· 2 BOLT, Cable Bracket _ ------------------------ 2 BOLT, Cable Clip -------------- ________ ________ 1 CLIP, Coble _______________ ------------------------ l LKWSHR, Cable Clip ______ ----------------- l NUT, Coble Clip -------------------------------- l

CABLE, Parking Brake - R.H. For Model 75A & 75B ------------------------ l For Model 75R -------------------- -------------- 1

Item No.

17

Part No.

17A 551688 17B 551745

18 551696 19 551837 20 2C-616 21 551834 22 20-06 23 4E-06 24 2C-610 25 104645 26 8D-06 27 2J-6208 28 4F-06106 29 lF-312 30 lC-510 30A 4E-05 ~l 20-06 31A 4E-06

6 7

8

tJ..,..,, 9

~~/ ~::

~12

<---13

i 14

--------15

16

TS-2586-P


CABLE, Parking Brake - L.H. For Model 75A & 75B ______________________ _ For Model 75R .

RETAINER, Cable l BRACKET, Coble to Frame l BOLT, Bracket to Frame _ ___ 2 CLIP, Coble to Brocket ___ ___ _ ______________ l NUT, Clip to Brocket _______ __ _______ _______ l LKWSHR, Clip to Brocket __ l BOLT, Clip to Brocket ___________ _ .. --- l BRACKET, Cable ___ __ _ _________ ______ 1 NUT, Clevis Jam . ___ ____________ _________ _ l

CLEVIS, Coble to Brake --·----------------- l PIN, Clevis to Broke Lever ________________ l COTTER, Clevis Pin ___________ ________________ l BOLT, Coble Brocket _______ ___________ _____ 2 LKWSHR, Coble Brocket ______ _____________ 2 NUT, Brocket to Frame ---------------------- 2 LKWSHR, Brocket to Frame ________________ 2


100 PM 2726

~ mmtrtD CONSTRUCTION MACHINERY DIVISION II

2 3 4

/

(

I I I I I I I I I I I I I

19

I I / I

/ I I I

'---~1

B ,)

/ /

TS-260'

PARKING BRAKE LEVER ASSEMBLY No. li.m

No. Part No. Description Req'd.

A 551742 LEVER ASSY (Inc. l thru 19) ........... . 941232. BODY, Lever ..................................... .

2 946163 WASHER, Base to Body ........•.•.•.....• l 3 949370 BASE, Adjusting Knob (Inc. 4) .......... 1 4 §CAP, Adjusting Knob· See 3 .............. 1 5 941237 ROD, Adjusting ................................. . 6 862648 TUBE, Adjusting ................................. . 7 941238 PIN, Tube to Link ............................. . 8 862652 LINK, Body to Bracket ........................ l 9 941236 LINK, Equalizer .................................. 2

10 §RIVET - See A --------·-···-·············· 1 11 25E·15 WASHER,ClevisPin .•........................

§ N·ot Sold Separately WHEN ORDERING PARTS, ALWAYS STATE

Item Part Na. No.

12

12A 946091

128 941235

13 1 F-312

14 941234

15 862653

16 941234

17 603985

18 862738

19 25E· 18

MODEL AND

PM 2726 101.2

Description

BRACKET, Mounting

RIGHT HAND ................................... .

LEFT HAND ..................................... .

COTIER, Clevis Pin ........................ .

SPACER ........................................... .

BRACKET, Pivot ............... : ..... : ........ .

SPACER .......................................... .

SPACER .......................................... .

PIN, Clevis ...................................... .

WASHER, Mounting ...................... .

SERIAL NO. OF MACHINE

~ ln!IrmJ

Item No.

2

3

4

5

6

7

8

9

10

2

Part No.

4D-12

3

l F-426

106268

525857

106138

507695

815841

lOH-25

117228

106137

CONSTRUCTION MACHINERY DIVISION Ill

4 5

10 9 8 7 6

TS-1918-P

TIE ROD ASSEMBLY - MODEL 75A No.

Description Req'd.

NUT, Ball Stud _________________ --------------------------------------------------------- _ ___ _________ __ ____________ 2

COITER, Ball Stud Nut _______ _ ___ ---------------------------------------------- ----------------------- ---- _ 2

SP RI NG ________________________ ---------------------------------------------- __________________ ----- ___ ----- -- __ 2

TIE ROD ASSY (Inc. 6 thru 9) _ -------------------------------------------------------------- ______ __ __ l

RETAIN ER, Felt Washer ---------------------------------------------------------------------- ________________ _____ 2

RING, Ball Stud Retaining ________________ -------------------------------------------- ___ ____________ ______ _ 2

PLATE, Ball Stud Retaining --------------------------------------------------------------·-------------- _ __ ___ 2

FIITING, Ball Stud Grease ______ ------------------------------------------------------------------------ _________ 2

BALL STUD ____________ . _________________ ------------------------------------------------- -------------------------. ----- _ 2

WASHER, Felt -------------------------------------------------------------------------------------------------------- ---- 2

WHEN ORDERING PARTS, ALWAYS STATE MODEL AND SERIAL NO, OF MACHINE

102 PM 2726

~ m!Im:ttD

Item Part No. No.

868980

2 l F-428

3 4E-08

4 2D-08

5 545941

6

7 4E-08

8 2D-08

9 2C-832

10 868980

11 l F-428

12 4E-08

13 2D-08

14 lOH-25

15 550600

16

C O N S T R U C T I O N. M A C H I N E R Y D I V I S I O N -3 4 5 6 7 8

14 15 16 17

30

28 27

26 25 24 23 22 19 18 TS-2689-P

STEERING LINKAGE GROUP - MODEL 75A No.

Description Req'd.

NUT, Booster to Freme ............ : ........ .

COTTER, Booster to Freme Nut ·······-- l

LKWSHR, Steering Geer Clomp ·-··--·- 2

NUT, Steering Geer Clomp ··-·-·-····----- 2

U-BOL T, Steering Geer to Frome·----·--

STEERING GEAR - (See Index) _______ _

LKWSHR, U-Bolt _ . -···········----·-·---- 2

NUT, U-Bolt ·- ·-· ·-···-··-------··-----------·-·-· 2

BOLT, Adopter to Booster ····-······-·----· 4

NUT, Dreg Link to Booster ··----···-··---·

COTTER, Dreg Link to Booster Nut -...

LKWSHR, Adopter to Booster ·---·--·---- 4

NUT, Adopter to Booster ·---·-·--··---·-- 4

FITTING, Pin Grease --·-·······--·---··------- 2

BELL CRANK ASSY (Inc. 18) -----------·--

PUSH ROD ASSY - (See Index) _______ _

Item No.

17

Part No.

18 550601

19 550602

20 l F-424

21 617863

22 617863

23 l F-424

24 550602

25 543326

26 25E-29

27

28 550044

29 2C-836


REAR DRIVE STEER AXLE-(See Index)

BUSHING, Bell Cronk --·····- ·-···- --· _ 2

PIN, Bell Cronk to Freme --···-·

COTTER, Pin Retaining Nut _ ....... -··-

NUT, Pin Retaining --·· ··-···-·- ---··-- -·-

NUT, Pin Retaining -------······· ··----·-·---.

COTTER, Pin Retaining Nut ...... .

PIN, Adopter to Bell Cronk ............ .

PUSH ROD, Steering Booster ........ .

WASHER, Dreg Link to Booster ........ _

DRAG LINK - (See Index) ............. .

CLAMP, Steering Geer .................. .

BOLT, Clomp to Fro me .. . ...... .. . 2

30 2C-1028 BOLT, Steering Stop...... ................. 2

31 8D-10 NUT, Steering Stop ..... 2

32 STEERING BOOSTER - (See Index) ...

PM 2726


103.1

~ t1t'ltm

Item No.

20

Part No.

4E-08

2 2D-08

3 545941

4 4E-08

5 20-08

6

7

8 25E-29

2

9

10

11

868980

1 F-428


8 9 10 11 12

1L 19 18

15 TS-2691-P

STEERING LINKAGE GROUP - MODEL 758 No.

Description Req'd.

LKWSHR, Clomp to Frame __ _

NUT, Clomp to Frame _

U-Bolt, Steering Gear

2 2

LKWSHR, U-Bolt . ---- -- ----- 2

NUT, U-Bolt . 2

STEERING GEAR - (See Index) _____ _

STEERING BOOSTER - (See Index) ___ _

WASHER, Drag Link to Booster _________ _

NUT, Drag Link to Booster _____________ _

COTTER, Drag Link to Booster Nut ___ _

ADAPTER, Steering Booster -(See Index) ____ _ ___ _ _ ___________________ _

Item No.

12

Port No.

13 2D-08

14 4E-08

15 2C-832

16 1 F-428


STEERING SPIDER - (See Index)

NUT, Adopter to Booster _________ 4

LKWSHR, Adopter to Booster 4

SOLT, Adopter to Booster 4

COTTER, Booster to Frame Nut ___ 1

17 868980 NUT, Booster to Frame _______ _

18

19

20

21

22

550044

2C-832

2C-1028

8D-10

DRAG LINK - (See Index)

CLAMP, Steering Gear ____ _

SOLT, Clomp to Frame __ _

SOLT, Stering Stop __

NUT, Steering Stop _

1

2

2

2


104.1 PM 2726

~ m!IttltD CONSTRUCTION MACHINERY DIVISION m

STEERING LINKAGE GROUP - 75R Item No.

Part No.


STEERING GEAR - (See Index) _________ _ 2 2C-832 BOLT, Clamp Attaching -----· _ __________ 2 3 545941 U-BOL T, Steering Gear to Frame ________ 2 4 2C-1028 BOLT, Steering Stop ______ -· _ _ _________ _ 5 2C-1032 BOLT, Steering Stop ___________ 1 6 8D-10 NUT, Steering Stop Bolt Jam ___ _ ______ 2 7 868980 NUT, Drag Link to Booster __ __ __________ 1

8 1 F-428 COTTER, Drag Link to Booster Nut____ 9 4D, 10 NUT, Adapter to Steering Arm _________ _

10 1 F-424 COTTER, Adapter to Steering Arm Nut --------------------------------------------------

11 ADAPTER, Steering Booster -(See Index) ___________ ----------------------

Item No.

Part No.

12 20-08 13 4E-08 14 25E-29 15 2C-832 16 20-08 17 4E-08 18 19 1 F-428 20 868980 21 22 20-08 23 4E-08 24 550044 25

Description

NUT, Adapter to Booster ______ :'.. LKWSHR, Adapter to Booster -"'. WASHER, Dreg Link to Booster i BOLT, Adapter to Booster ____ :-,": NUT, U-Bolt ___ . LKWSHR, LI-Bolt ___ ..... ------STEERING BOOSTER - (See In« COTTER, Booster to Axle Nut 1,.

NUT, Booster to Axle ------- -·-/·· FRONT STEER AXLE - (See ln1 NUT, Clamp Attaching _______ _ LKWSHR, Clamp Attaching --c-.•

CLAMP, Steering Gear ________ ; __ DRAG LINK - (See Index)---+-

PM 2726


105.1

5 6 7

35 33 32 31

STEERIN · G GEAR ASSEMBL y

26

I '"' 0 :z: "' -t :ID C:

'"' -t -0 :z:

-:z:

0 -< -"' 0 :z:

TS-1282-P I

•

CONSTRUCTION MACHINERY DIVISION -STEERING GEAR ASSEMBLY Item No.

Part No.

A 940109

639796

2 853368

3 648304


GEAR ASSY (Inc. 2, 5 thru 24, 26 thru 36, 39, 40)

BUTTON ASSY, Horn

TERMINAL, Horn ___ _

NUT, Steering Wheel

4 1508704 WHEEL, Steering ____ _

5 853394

6 857729

7 940112

8 940122

SA 940123

9 853373

10 853379

11 851762

SEAT, Upper Bearing Spring __

BEARING, Upper _

HOUSING ASSY (Inc. l 0, 26) --

SHAFT ASSY (Inc. 2, SA, 9, 11, 14, 15, 16, 17, 36)

SHAFT

BEARING, Worm Thrust _ _ __

CUP, Worm Thrust Bearing

SOLT ASSY (Inc. Washer) 3

Item No.

Part N•>.

24 853391

25

25A 940114

258 940125

25C 940127

26 853357

27 853372

28 853385

29 853373

30 lC-612

31 2E-06

32 851770

Description

SEAL, Pitman Shaft Grease

ARM, Pitmon

For Model 7 5A

For Model 75B __

For Model 75R .

BUSHING, Pitman Shaft

ADJUSTER, Worm Bearing _____ _

NUT, Worm Bearing Adjuster Lock -

BEARING, Worm Thrust

BOLT, Side Cover ____ _

LKWSHR, Side Cover

ADJUSTER, Lash _____ _

32A 853187 tSHIM KIT, Lash Adjuster .

33 851756 GASKET, Side Cover _

No. Req'd.

2

3

3

12 22F-4 CAP, Filler _ 34 853182 COVER, Housing Side (Inc. Bushing) __

13 5K-432 NIPPLE, Filler Extension ____________________ _

14 853464 CLAMP, Ball Return Guide - ---

15 853412 GUIDE, Ball Return __ - ____ _ 4

16 lOJ-09 BALL __ _ -- ___________ 106

17 853408

18 853380

19 853376

20 lC-718

20A lC-726

208 3E-07

21 4E-18

22 850756

23 940111

tNot Illustrated

BALL NUT _ ___ ___ _ ____________________________ _

GASKET, End Cover---------------------------

COVER, Housing End --------- -

SOLT, End Cover - Short ______ _

BOLT, End Cover - Long

LKWSHR, End Cover ___ _

LKWSHR, Pitman Arm ____ _

NUT, Pitman Arm ____ _

GEAR, Pitman Shaft ____ _

3

4

35 SD-07 NUT, Lash Adjuster __

36 940115 CONT ACT, Horn Cable -

37 622026 CONNECTOR, Horn Cable . _

37 A 622028 tCOVER, Horn Cable Connector

37B 622027 tSCREW, Horn Connector .

37C 518346 tGASKET, Horn Connector .

38 3G-1003 SCREW, Horn Cover __

38A l 7E- l O tLKWSHR, Horn Cover .

39 853395 SPRING, Upper Bearing

40 853384 tKEY, Steering Wheel

41 695930 tSCREW, Horn Button

42 940119 tSPACER, Lock Block

43 940120 tBLOCK, Adjusting Nut Lock


PM 2726 107.1

2

2

4

1 2 3 4 5

/ / --.,

9 10 11 12 13 14 15 16

/------ 38 39 40 41 42 43 44

21 22

23

45 .46

86 85 84 B3 82 81 80 79 78 77 76 75 74 73 12 71 70 69 68 67 66 65 64 63 62 61 STEERING BOOSTER ASSEMBLY

24 25

0 z

0 -< .,,

r.rnm rmrm CONSTRUCTION MACHINERY DIVISION • STEERING BOOSTER ASSEMBLY

For Serial: 75A - 8123 thru 8768 75B - 6123 thru 6144 75R-7123 thru 7141

Item No.


No. Req'd.

A

l 2 3 4 5 6 7 8 9

l' .... 550596 . * siE~RIJ'lQ. BOOSTER ASSY L ---:--- ·-----

10

11 12 13

858302 872844

858226

858227 858236 858235

858234

868981 858237

858232

858238

858239 858240

14 858241 15 858242 16 858243

PLUG, Housing -·----------------------------------SPRING, Housing Seat Pressure _______ _

SEAT, Housing ----------------- ------------------ 1 HOUSING ______ ------·------ ____ ------------ 1 BALL STUD ___ _____ ____ _ ________ ------------COVER ____ _ _____________________ -------------------

SHIELD SPRING, Shield _________________________ _

SCREW, Set ___________ _

PLATE, Retainer __ _ SPRING ______ _

WIPER, Leather _________ ----------------------SPACER ________ __ ___ _ ___________________ _

WIPER, Felt ______________________________ _

RETAINER --------------------------------------------ADAPTER, Upper ____________________________ _

-~ ! ;

17 858244 PACKING __________ ----------------------- 6

18, 858245 ADAPTER, Lower _________ ----------------------19 858246 BUSHING, Cap _ _ _________ ----------20 858247 CAP _______ . ________________ ---------------- 1

21 25K-40216 "O" RING ______ --------------- --------------- 2

22 858249 ROD . _ ----------------------- -----------------------23 858251 RING, Retaining ____________________ --------

24 868996 PISTON ______________ ---------------------------- 1 • 25 4D-14 NUT ________________________________ ---------------· 1

26 858254 SPRING ____ ---------------- ------" ----------------27 25K-30018 "O" RING _____________________________ --------- 2

28 858256 TUBE, Cylinder ------------------------ ---------29 858257 CYLINDER, Booster Assy -------------------

30 940146 BOLT _ -----------------------------------------------31 25K-30018 "O" RING ------------------------------------------ 2 32 858259 RING, Snap ----------------------------------------33 1 F-424 COTIER _ --------------------------------------------34

35

36 37 38 39 40 41

42 43

44 45

858264 SCREW ------------------------------------------------ 4 lOH-2 FITTING, Grease __ ----------------------------- 1

18D-06 NUT ----------------------------------------------------1 F-848 COTIER ____________ --------------------------------

25K-30020 "O" RING -----------------------------------------862257 FLANGE _______ -------------------------------------25K-30020 "O" RING ----------------------------------------- l

85827 4 WASHER ------------------------------------------- 4 858273 SCREW -------------------- --------------------------- 4 862257 FLANGE ____________ -----------------------------

858272

858271 SPRING, Check Ball ----------------------------BALL, Check _______ --------------------------------

Item No.

46 47 48 49

50 51

52 53 54 55 56 57

58 59

60 61 62 63 64 65

66 67 68

69 70

71

72 73 74 75

76 77 78 79

80

81 82

83 84 85 86

87

88

89

90

Part No.

858270

858236 858291 940148 858295 858294

872844 858226 858298

lOH-2 858299

17G-416

858293 858296 858290 858289 858288 858287

Description N,

Req

SEAT, Ball Check _____ _ _ _____________ _

BALL STUD ··--------------- _____________________ _

COVER __ _ _______ -----------------------------SPRING _ KEY, Plug __ PLUG __ _ SPRING, Housing Seat ______________________ _ SEAT, Housing _____ ________ _ ___________ _

PAD FITTING, Grease SPRING

SETSCREW BODY _________________________ -----------------------

NUT, Setscrew __ _ ----------------------------STEM

PLATE, End ______ ---------------------SLEEVE ________ ------------------------------------RET Al NER

25K-40204 "O" RING, Packing __________________________ _ 858286 SEAL, Oil _______________________________ _

858284 GUIDE . ________ ---------------------------------858285 858284

713133 858282

SPRING GUIDE ______________ ---------------------------------

RING, Snap __ -------------------------------------NUT __ __ ____ _ ____________________ _

858281 WASHER 858280 SPRING __ _

858279 SPOOL ___ __ _ ___ __ ___ ------------------------

858278 WASHER _ ___ ------------------------------------858277 NUT _______________ ---------------------------------

25K-30016 "O" RING __ ---------------------------------------25K-30016 "O" RING ____________________________________ _

858268 GUIDE ___ .. --------------------------------------858267 858266 lOJ-12

858263

SPRING ______________________ ------------------------

GUIDE ____ -------------------------------------------

BALL ----------------------------------------------------HEAD _______________ --------------------------

25K-40204 "0" RING ----------------------------------------· 867585 SLEEVE _____________________ ---------------------

25K-40216 "O" RING ________ --------------------------------858260 CAP _______ -----------------------------------------

940149 t WASH ER ___ ------ ---------------------------------

940 l 28 t:J:A TT ACHING KIT (Inc. 6, 7, 8, 38, 40. 41, 42, 48, 49, 87) ________________________ _

940079 t:J:REPAIR KIT (Inc. 15, 16, 17, 31, 38 40, 65, 76, 77, 85) ________________________ _

868980 tNUT, Ball Stud -------------------------------

*NOTE: For complete replacement of 550596 Booster use 541541 Booster plus 1-517089 Fitting, 1-31F-4 Fitting, 1-661564 Adapter Union & 1-91 F-6 0-Ring.



PM 2726 109

r.rr;m ~


7 8 9 10 11 12 13 14 15 16

' 77 76 74

STEERING BOOSTER ASSEMBLY

110

------------- -~~-

-,,

26

TS-2769-P

PM 2726

~ m!Ittltl1 CONSTRUCTION MACHINERY DIVISION -STEERING BOOSTER ASSEMBLY

For Serial: 75A - 8769 thru 10082, 10085 thru 10089 758-6145 thru 6195 75R - 7142 thru 7150

Item No.


No. Req'd.

A 552944 ** STEERING BOOSTER ASSY ---------------· _· J,

1 867580 RING, Snap ------------------· __________________ 1 2 869021 KEY _____________________ ______________________ ____ 1 3 869020 PLUG . __ _ ____________________ ________ l 4 869019 SPACER __ _ _______ _____ ___ __________________ 1 5 869018 SPRING ____ _ ______________ ____________________ 1 6 869017 SEAT, Ball Stud _____ -·---------------------- 1 7 869016 SEAT, Ball Stud _ __ _ ________ ________ _ 1 8 869015 KEY _ ___________________ 1 9 869014 NUT ___ _ _____ _____________ ________________ 1

10 869013 WASHER ___ ____ __ ________ ____________________ l 11 869012 RETAINER ______ ---------------------------------- l 12 869011 SLEEVE ______________________ ---------------------- 1 13 1 OH-2 FITTING, Grease __ ---------------------------- 1 14 869010 RETAINER_---------------------------------- 1 15 25K-40204 "O" RING __ ___ _ ____________ ______________ 1 16 868982 BALL STUD __ ___ ___ ___ _ ___ __ _________ 1 17 858291 COVER, Dust __ _ __ ___ __ _ ___ _ _________ ___ 1 18 868981 SPRING _______ ____ _____ ______________ 1 19 868980 NUT _ _ ______ __ _ ______ _ _____________________ 1 20 664131 Pl N _____ ___ __ ____ ___ ___________ 1 21 351927 NUT -· ______________________________ 1 22 868984 RETAINER, Spring _____ _ ____________________ 1 23 940663 SPRING ______ ----------------------------------- 1 24 868986 WASHER _ _ _ _ _ ________________________ l 25 875495 SPOOL KIT, Valve ________ ______ _____________ l 26 l OJ-12 BALL ___ _ ___________ _____ ______________________ l 27 868992 SPRING __ _ __ _______ ___ ___________________ 1 28 868991 WASHER _ ________ ______________ 1 29 664138 RING, Snap _______________ ---------------------- 1 30 25K-40028 "O" RING ____ _ ____ _____ _______ ______ __ l 31 868993 RING, Snap __ .___________________________________ 1 32 868994 PLUG _______ ___________ _ __________ l 33 8707 44 VAL VE BODY (Inc. 37) _______ ______ _ _____ l 34 l 6F-04 PLUG - %" Pipe _________ ____________ ________ 3 35 l 6F-02 PLUG - Va" Pipe ------------------------------- l 36 940666 SEAT _ _ ______ _ ---------------------------------- 1 37 940667 POPPET _________________ . ____________ _____________ 1

38 861811 PLUG -·------- -------------------------------------- 1 39 91 F-5 "O" RING _____________ --------------------------- 1 40 940669 SPRING --------------------------------------------- 1 41 · 940668 tSHIM ----------------------------------------------42 25K-20010 "O" RING ------------------------------------------ l 43 940664 SPRING ____________________ ---------------------- 1 44 25K-30020 "O" RING --- -------------- ----------------------- 1 45 943665 KIT, Stay Bolt & Nut -------------------------- 4 46 25K-40216 "0" RING _______ ---------------------------------- 2 47 25K-30016 "O" RING __________________ -------------------- 1 48 869007 TUBE, Oil Passage ------------------------------ l

*NOTE: For replacement of 941444 use 870740 plus 1-870732.

Item No.

Part No, Description

No. Req'd.

49 869005 CYLINDER ____ ---·- ____________ l 50 25K-30016 "O" RING __ _ ___ --------------------------- l 51 869008 SPRING ___ _ ___ ___ ____ __ __ l 52 4D- l 4 NUT _ _ _ ______ _______ __________ __________ l 53 l F-424 COTTER ____ ________ __ ___________________ l 54 868996 PISTON __ ___ _ ___________________ _____________ 1 55 858251 RING, Piston ________ _____ _ ___________________ l 56 868997 CAP _____ -· _______ --------------------------- l 57 869000 NUT __ ___ __ __ _ _ _ _______ 4 58 664769 BUSHING, Oilite _____ ____ _ _____________ l 59 858245 PACKING, Male ________ _ ______ ______________ l 60 858244 PACKING, Chevron _ __________ _____________ 5 61 858243 PACKING, Female _ ____________ l

62 62A 858241 628 870732

63 63A 941444 638 870740

64 863980 65 868981 66 858234 67 858235 68 858236 69 l F-848

70 70A 858227 708 870736

71 858302 72 872844 73 858226 74 lOH-2 75 18D-06

76 76A 858237 768 870730

77 77A 869004 778 870739

78 942672

79 942668

WIPER, Felt For Serial Group "A" Below ______________ l For Serial Group "B" Below -·----·----- l

NUT, Packing "'For Serial Group "A" Below _

For Serial Group "B" Below __ _

NUT, Ball Stud _______________________ _ 1 SPRING, Ball Stud _____________ __________ 1 SHIELD, Ball Stud ------------------------------ l COVER, Ball Stud Dust _ __________ _ ___ 1 BALL STUD __________ _ ________________________ l COTTER ___ _________ _ _ __________ _____________ 1

HOUSING, Ba// Stud For Serial Group "A" Below _ For Serial Group "B" Below -------------

PLUG -------·-- ______________________________________ .. 1 SPRING -·- ------------------------------------------ l SEAT, Ball Stud ---------------------------------- 2 FITTING, Ball Stud Grease ---------------- l NUT --------------------------------------·------------- 1

SCREW For Serial Group "A" Below _____ For Serial Group 11811 Below --·-----------

ROD, Piston For Serial Group "A" Below ______________ For Serial Group "B" Below ______________

HREPAIR KIT, "O" Ring (Inc. 15, 30, 39, 42, 44, 46, 47, 50) -------------------------

H?ACKING KIT (Inc. 59, 60, 61, 62) ____

**NOTE: For replacement of 552944 Booster use 541541 Booster plus 1-517089 Fitting, 1-31 F-4 Fitting, 1-661564 Adapter Union and 1-91 F-6 0-Ring.


Serial Group "A": 75A- 8769 thru 9147 75B-6145 thru 6159

Serial Group "B": 75A- 9148 thru 10082, 10085 thru 10089 75B- 6160 thru 6195 75R - 7142 thru 7150

PM 2726


111

CONSTRUCTION MACHINERY DIVISION -9 10 11 12 13 14 15 16

75

STEERING BOOSTER ASSEMBL y TS-2768-P

112 PM 2726

~ rm:c:ttD CONSTRUCTION MACHINERY DIVISION -STEERING BOOSTER ASSEMBLY

For Serial: 7 SA GAS - 10083, 10084, 10090 thru 12183, 1 CA3170 and thereafter 75A DIESEL - 10090D thru 12183D, 1 CB893 and thereafter 75B - 6196 thru 6270 75R - 7151 thru 7183

Item Part No. No. No. Description Req'd.

A

l

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

513228 iii STEERING BOOSTER ASSY _____ _

867580 RING, Snap ______________ ------------------------869021 KEY _ _____ ___ ______________ _______ __________ 1

869020 PLUG _________________________________________ _

869019 SPACER -------------------------------------- 1 869018 SPRING ____________ ------------------------------- · 1 869017 SEAT, Ball Stud _____________________________ _

941818 SEAT, Ball Stud ___________________________ _

941816 LKWSHR _______________________________ _

941815 NUT, Spool Adjusting _______ 1

941817 RETAINER __________________________________ 1

869011

lOH-2

869010

SLEEVE ___________________________________ _

FITTING, Grease ______________________________ _

RETAINER __ _ __________ _ ________________ _

25K-40204 "O" RING ______________________________________ _

868982 BALL STUD _ ___ _ _ ______ _ ________________ _

25K-30020 "O" RING ___________________ -------------------- 1

858291 COVER, Dust __________________ __ ___________ 1

868981

868980

SPRING ______________________________________ _

NUT .. ____________________________________________ _

20 868984 RETAINER, Spring __________________________ _

21 940663 SPRING __________________________________ _

22 940664 SPRING ___ _

23

24

25

26

27

28

29

30

868986 WASHER ____ _ ___________________________ _

25K-20010 "O" RING ____________ _______ __ ___________ 1

l OJ-12 BALL __ _ _ ___ _ ___ ______ -------------------- 1

868992

868991

664138

SPRING ----------------------------------------------WASHER __ _

RING, Snap ____________ .

942779 SPOOL, Valve ------------------------------------

25K-40028 "O" RING __________ ---------- ------------------

31 868993 RING, Snap ______ ----------------------------

32 868994 PLUG --------------------------------------------------

33 870744 BODY, Valve (Inc. 37) _ _ _____ ______________ l

34 l 6F-04 PLUG - 1.4" Pipe _ ------------------------------ 3

35 16F-02 PLUG - 1/e" Pipe _______________________________ _

36 940666 SEAT --------------------------------------------------

37 940667 POPPET

38 861811 PLUG _______ ------------------------------------------

39 91F-5 "O" RING ____________ -------------------------

ftem No.


No. Req'd.

940669 SPRING 940668 . :j:SHIM ___ _ ____________________________________ _

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

942806 WASHER, Back-Up _________________ __ _______ 2

943665 KIT, Stay Bolt & Nut -------------------------- 4

25K-40216 "O" RING ___ --------------------------------- 2

25K-30016 "O" RING ____________________ ------------------

869007 TUBE, Oil Passage -----------------------------

869005 CYLINDER _ _ ____ ----------------------------

25K-30016 "O" RING

869008 SPRING

40-14 NUT

COTTER

PISTON

RING, Piston

CAP

1 F-424

868996

858251

868997

869000

664769

858245

858244

858243

NUT _______ -------------------------------------------- 4

60 870732

61 870740

62 868980

63

64

65

66

67

68

69

868981

858234

858235

858236

1 F-848

870736

858302

70 872844

71 858226

72 lOH-2

73 180-06

74 870730

75 870739

BUSHING, Oilite -------------------------------

ADAPTER, Male Chevron ____________________ 1

PACKING, Chevron ___ ------------------------ 5

ADAPTER, Female Chevron _______________ _

WIPER _______________ ---------

NUT, Packing ___________________________________ _

NUT ----------------------------------------------------

SPRING _ _ __ _ _ __

SHIELD ______________________________________ _

COVER, Dust ________ _____ _____ _ _ ____ __

BALL STUD ___________________________________ _

COTTER __________ ----------------------------- _

HOUSING, Ball Joint __ _

PLUG ____ ---------------------------------------SPRING ______ _____________ ______ ____ _ 1

SEAT, Ball Stud ______ _ ___ _________ _ __ _ 2 FITTING, Grease __________________________ _

NUT ____________ --------------------------- _______ _

BOLT -------------------------------------------------

ROD, Piston ----------------------------------------

76 942672 t:J:REPAIR KIT "O" RING (Inc. 14, 16, 24, 30, 39, 42, 44, 45, 48) -----~-----~-

77 942668 t:J:PACKING KIT (Inc. 57 thru 60) _______ _

*NOTE: For replacement of 513228 Booster use 541541 Booster plus 1-517089 Fitting, 1-31F-4 Fitting, 1-661564 Adapter Union and 1-91 F-6 0-Ring.



PM 2'726 113

.... -~

' '

1l i: ,,, .... ,,, "'

45

43 c--42 I

I L-

41 40 39

2 34 5 6 7 8 9 10 11 12 13 14 15 16 17

------------------------------------

26 27

38 37 36 35 34 33 32 31 30 29 28

. STEERING BOOSTER ASSEMBLY

18

19

20

I

-0 z

-< -c,, -0 z

~30851 '------------------------------------------'

- - -

~ ammcrm CONSTRUCTION MACHINERY DIVISION -

Item No.

A 1 2 3 4 5 6 7 8 9

10 11 12 13

14 15 16 17 18 19 20 21 22 23 24 25

STEERING BOOSTER ASSEMBLY

This Section covers 541541 Steering Booster Assembly and revision in hydraulic piping necessary when used as replacement Booster Assembly on Models and Serial Numbers as listed below. This Booster Assembly may be identified by Vickers No. S20B22-3BAZNN11A-10-R10 stamped on nameplate thereof.

Model Serial Range

75A GAS 75A DIESEL 758

8123 thru 12183 and 1CA-3170 thru 1CA-3899 8123D thru 12183D and 1CB-893 thru 1CB-1199 6123 thru 6299

75R 7123 thru 7299

The following additional parts are required when installing 541541 Steering Booster Assembly in place of_previously used unit. Install parts as shown.

1 - 517089 Fitting - 90° 1 - 31 F-4 Fitting - 90 °

1 - 661564 Union Adapter (Remove from old booster) 1 - 91 F-6 0-Ring ( Renew)

Part No, No. De1criptlon Req'd.

541541 STEERING BOOSTER ASSY (Inc. 1-49) 1 868980 NUT ------------------------------------------------- 1 868981 SPRING ---------------·-------------------------- 1 858236 BALL STUD ------------------------------------- 1 870730 SCREW -------------------.. ------------.. ------------ 1 870736 HOUSING, Ball Joint --·------------------- 1 18D-06 NUT ------------------------------------------------- 1 672907 RING, Snap -------------------------------------- 1 886519 SEAL KIT, Cylinder ------------------------ 1 944754 CYLINDER ASSY (Inc. 8) ---------------· 1 885865 NUT ------------------------------------------------- 1

§"O" RING (See 50) -------------------------- 1 .§"O" RING (See 50) -------------------------- 1

944749 PLUG ......................................................................................... _ .. ___ ................... 1

§"O" RING (See 50) --------------------·----- 1 944748 SPRING ---------------------·-------------------- 1 944752 PLUNGER ASSY, Relief Valve ------- 1 944750 SEAT, Relief Valve -------------------------- 1 944751 BODY ---------- ---------------------------------- 1

§ "0" R ING ( See 50) -------------------------- 1 882535 FITTING, Grease --------------------·----- 1 882534 HOUSING, Flanged -------------------------- 1 891159 KIT, Ball Stud Retaining------------------ 1 885865 NUT ------------------------------------------------ 4 882537 STUD ---------------------------------------------- 4 882538 COVER, Du st --------------------------------- 1.

Item Part No. No.

26 882533 27 882532 28 4D-14 29 883980 30 882532 31 882541 32 882531 33 18C-680 34 882526 35 882525 36 882527 37 944747 38 882523 39 882527 40 41 882522 42 10H-25 43 858226 44 858226 45 858302 46 872844 47 lF-848 48 858235 49 858234 50 886520


PLUG, Ball Stud ------------------------------ 1 SEAT, Ball Stud ------------------------------NUT ------------------------------------------------- 1 BALL STUD ----------------------------------SEAT, Ball Stud ----------------------------WASHER, Spring ------------------------------- 1 SPACER -----------------------------------------80 LT ------------------------------------------·-- 1 WASHER ----------------------------------------S LE EVE ------------------------------------------ 1 WASHER ---------------------------------------- 1 SPRING, Centering 50# ---------------· 1 SP A CE R ----------------------------------------- 1 WASHER ---------- · ------------------------------

§ "O" RI NG (See 50) -------------------------SPOOL, Valve --------------------------------FITTING, Grease ------------------------------SE AT, Ball Stud -----------------------------SEAT, Ball Stud ------------------------------p LUG ----------------------------------------------SP R ING -----------------------------------------COTTER ----------------------------------------- 1 COVER , Du st ----------------------------------- 1 SH IE LD, Dust --------------------------------- 1 SEAL KIT (Inc. 11, 12, 14,

1 9 & 40) ----------------------------------------§Not Sold Separately

NOTES

PM 2726


115

,---------------~------~-.. ---- - -----------

~ mmml C O N S T R U C T I O N M A C H I N E R Y D I V· I S I O N

517089------

0UT LET PORT----

Ill

661564 91F-6

BOOSTER

INLET PORT

FRONT OF MACHINE

STEERING PIPING HOOKUP TO 541541 BOOSTER TS-3093

116 PM 2726

~ lll!Ittlm

11

Item No.

A

2

3

4

5

6

7

8

9

10

11

2 3

Part No.

10

525867

507695

815841

lOH-25

117228

25E-27

4D-12

1 F-426

106137

106268

106138


4

9

5

PUSH ROD ASSEMBLY - MODEL 75A

Description

*PUSH ROD ASSY (Inc. 1 thru 5) __

RING, Plate Retaining ___ _

PLATE, Ball Stud Retaining

FITIING, Ball Stud Grease

BALL STUD __ _

§ROD ONLY (See "A") _______ _

WASHER, Ball Stud __

NUT, Ball Stud __________________ _

COTIER, Ball Stud Nut _ __ _ _______ _

FELT WASHER, Ball Stud ___ _

SPRING, Felt Retaining _________ -------

-

8 7 6

TS-2690-P

No. Req'd.

2

2

2

2

PLATE, Felt Washer Retaining -------------------------------------- ----------------------------

2

2

2

2

2

2

*NOTE: Machines in serial group listed below were equipped with a push rod with replaceable ends. When it becomes necessary to replace rod on these machines order item "A" above. Service parts for replaceable ends will still be furnished.

8123 thru 12045, 12048, 12049, 12050, 12054, 12059, 12J60, 12062, 12064, 12066. §Not Sold Separately


PM 2726 117 .1

~ mm.mi

14

13


2 3

10 9 8

Ill

6

7

TS-1189-P

TIE ROD AND PUSH ROD END ASSEMBLY - MODELS 75A AND 758 Item Part No. No. No. Description Req'd.

A 112652 *END ASSY, Tie Rod (Inc. 1 thru 14) -----------------------·-----------------------·------------- ---- -- ---- 4

Quantities listed below are for 1 end.

l 106094 RI NG, Cop Retaining ______ ---·-· --------------------------------------------- ________________ . -----------------------

2 106091 SPRING ---- ____ -- ------- ----- --- _______ --- -------------- ---- ----- --------- -- --------------------------------------------

3 106093 CAP, Boll Stud Retaining ____ -------------------- ___________________ :_____________________________________________ 1

4 20-10 NUT, Clomping __ ·----------------------------------------------------------------------------------------------- 2 5 4E-10 LKWSH R, Clomping ________ ----------------------------------------------------------------------------------------- 2 6 2C-1040 BOLT, Clem ping ___________________ --------------------------------- ---------------------------------------------------- 2

7 106113 HOUSING, Tie Rod End --·--------------------------------------------------------------------------------------------8 106088 WASH ER, Retoi ni ng ___________________ --------------------------------------------------------------------------------

9 112654 BA LL STUD ASSY (Inc. 11) ----------------------------------------------------------------------------------10 106268 SP RI NG _________________________ ----------- ________ ------ __ -------------- __ -------- ---- ------------------_ ---------------- --

11 112174 NUT, Bo 11 Stud ---------------------------------------------------------------------------------------------------

12 l F-426 COTTER, Boll Stud Nut ------------------------------------------------------------------------------------------------

13 106138 RET Al N ER, Felt ___ --------------------------------------------------------------------------------------------------------14 106137 FELT ---------------------------------------------------------------------------------------------------------------------------

*NOTE: Quantity required this item for 75B is 2.


118 PM 2726

J

I

I

~ mmm

9-

2

1-----1

CONSTRUCTION MACHINERY DIVISION -3 4

TS-2767-P

STEERING BOOSTER ADAPTER - MODELS 75B AND 75R Item No. No. MODEL 75B MODEL 75R DESCRIPTION Req'd.

A 550782 550789 ADAPTER ASSY (Inc. l thru 13) -··· ... 106094 940152 RING, Cap Retaining ....... _ ............. _ .

2 106093 940154 CAP, Spring .............. ···-··· _ ... -············-·······-··· ... .......... . ... . 3 106091 940153 SPRING ····-······ ·--·-···-·-·······-·-···-·····--··-·····-········ ·······--····-······-·--4 . §HOUSING, Adapter (See A) ...... ······--· -······--·- __ ---·---··--- .... ------··

5 106138 102435 COVER, Felt .. --···-···-···-·---- .. --·--·-···--·----·-· .. ····-·· --··--··· _ . 6 106268 102438 SPRING, Felt --··---·---·---------·--·-··---· -----·------····--··- -------·---·--·--- __ __ __ ·-7 lF-424 1 F-424 COTTER, Ball Stud Nut ---·-- __ ........ ·--·-··-··-·-·· ··-------- ________ -· __

8 112174 4D-10 NUT, Ball Stud ---·---·--·-·-·----·· -·---------···--··---· --··· ... ··--·--·---·--· .............. . 9 *.112654 940155 BALL STUD (Inc. 8) _______ -·· _ --·--·· __________ -·--- _________________ -----·----·-·--·-

10 106137 102436 FELT, Ball Stud Dust __ ·----· _ . _____________________ ---·· --·--------------·------- 1

11 106114 940156 SOCKET, Ball Stud ··---- .. ---·- ___ --···---------·· -·-----·---- 2

12 106079 940157 RETAINER, Ball Stud Socket ·-------- ·····- _ _ -·-------·- ---·-- 2

13 106088 940158 WASHER, Retainer Retaining ·············-····· -··- _ .. ····------·-·--·---·---·--

14 lOH-25 lOH-25 tFITTING, Ball Stud Grease ----· ·--·-· .. . ..... __ . ---· ___ ·--··-----------·-·-

*NOTE: When ·112554 Ball Stud and Nylon Assembly is installed on Model 758 remove and discard 106114 Socket and 106079 Retainer items 11 and 12.



PM 2726 119.2

~ ttt!IrtttD

Item No.

A

B

C

Part No.

106145

106146


TS-9-Pl

TIE ROD END ASSEMBLY - MODEL 75R No.

Description Req'd.

END ASSY, Tie Rod (Inc. 1 thru 15)

Right Hand _____ _

Left Hand ________ _

Item No.

7

Part No.

7A 106560

78 106727

Description

HOUSING, Tie Rod End

Right Hand -------------------------------

Left Hand _

No. Req'd.

Quantities listed below are for 1 end. 8 940155 BALL STUD ----------------------- ______ _ _____ _

9 40-10 NUT, Ball Stud ------------------------- ________ _ 940152 RING, Cap Retaining ----·---------·- -------- 9A 1 F-426 tCOTTER, Ball Stud Nut __ _

2 940153 SPRING --- ------------ ------ --··-------- 10 102438 SPRING ___ : ______________________________________ _

3 940l54 CAP, Ball Stud Retaining __ ., ___ --·

11 102435 RETAINER, Felt ------------------------------------

12 102436 FELT _______________________________________________ _ 4 lC-832 BOLT, Clamping - ---- ---- ---·- 2

13 940156 SOCKET, Ball Stud _____________________ _

5 lD-08 NUT, Clamping --· -- -------------- 2 14 940157 RETAINER, Ball Stud Socket _____________ _

6 4E-08 LKWSHR, Clamping --------- ---------- ----- 2 15 940158 WASHER, Retaining ----------------------------

tNot Illustrated


120.1 PM 2726

~ mm.tml CONSTRUCTION MACHINERY DIVISION -

Item No.

A

B

C

D

2

3

4

5

6

7

2

Part No.

550595

550781

550788

940011

940015

940016

940018

lOH-25

1 F-432

7

3 4

6 5

TS-6-P

STEERING DRAG LINK No.

Description Req'd.

DRAG LINK ASSY (Inc. 1 thru 5)

Model 7 5A ---------· ____ ·--· .--------------------------------------------------------------------------------------------

Mode I 7 5 B ______________________________________ --------------------------------- ________________________________________ _

Model 7 5R ----------------------------------------· ___ ----------------------------------------- ------------------------

PLUG, Ball Seat Adjustment _______________________ : _____________________________ ·---------------------

BALL SEAT ____ ----------------------------. ---------------------------------------------------------------------------------

SPRING --------------------------------------------------------------------------------------------------------------------

§FORGING, Drag link - (See "A") ------------------------------------------- ____________________________ _

PLUG, Safety --------------------------------------------------------------------------------- ------------------------------

FITII NG, Drag link Grease _________________ ------------------------------------- ----------------------------------

COTTER, Adjustment Plug ---------·---------------------------------------------------------------------------------

§Not Sold Separately - Crder Complete Assembly Item "A".

PM 2726


121

~ mm:ttt1 CONSTRUCTION MACHINERY DIVISION -

Item No.

18

Fart No.

550700

17

2 3 4 5 6 7-8 9

------i ----r--\----l . : \

16 15 14 13 12

HYDRAULIC SYSTEM - STEERING - MODEL 75A

For Serial 8123 thru 10222, 10240 and 10247 thru 10251

Item Part

11

Description No

Req'd. No. No. Description

ADAPTER UNION _________ ·-----------· __ 11 661564 ADAPTER UNION

10

TS- 171 -P

No. Req'd.

2 550612 COUPLING (Welded to Pipe Assy) ___ _ llA 91 F-6

12

t"O" RING, Adopter Union ___ __

2

2

3 550610 TEE (Welded to Pipe Assy) ____ _

4 550611 PIPE (Minus Items 2, 3, 9) _ ---------------- 2

5 550614 LUG, Pipe (Welded to Pipe Assy)______ 2

6 550608 PIPE ASSY (Inc. 2 thru 5 & 9) ___________ _

7 552152 BOLT, Pipe Attaching _______ ---------------- 2

8 4E-06 LKWSHR, Pipe Attaching _______ _ 2

9 550612 COUPLING (Welded to Pipe Assy) ___ 2

10 661559 * HOSE, Line to Steering Booster _______ __ 2

13

14 31 F-4

15 661560

16 661559

17 31F-4

18

STEERING BOOSTER - (See Index) .

RESERVOIR, Hydraulic Oil -(See Index) _____________ __

ADAPTER UNION ____ _

HOSE, Pump Suction

HOSE, Pump to Pipe _

ADAPTER UNION ___ _

PUMP, Steering - (See Index)

2

*NOTE: When 661559 Hose (Item 10) is installed on machine Serial 8123 thru 8768 one 661564 Adapter Union and one 91 F-6 "0" Ring must be used.

tNot Illustrated


122 PM 2726

~ ~


3 4

19-----

14 13 12 11

HYDRAULIC SYSTEM - STEERING - MODEL 75A

-

5

TS-2589-P

For Serial: GAS - 10223 thru 10239, 10241 thru 10246, 10252 thru 12183, 1CA3170 thru 1CA341 DIESEL - 10223D thru 12183D, 1 CB893 thru 1 CB968

Item No.

2 3 4 5 6 7 8 9

10

Part No.

666846 1545186 31 F-4 712766 661563 2C-624

. 514610 4E-06 20-06


RESERVOIR, Hydraulic Oil -(See Index) --------------------- ___________ _

NIPPLE, Hose to Reservoir ____________ _

CLAMP, Hose _ -·--- ___ ___ __ ____ __ l ADAPTER UNION________________ __ ___ _____ l HOSE, Pipe to Reservoir ________________ _

HOSE, Pump to Pipe - Pressure ____ ___ 1 BOLT, Pipe to Frame________ _________________ 2

PIPE, Steering System ______________ ______ __ 1

LKWSHR, Pipe to Frame ____________________ 2

NUT, Pipe to Frame -------------;------------ 2

Item No.

Part No.

11 516159 12 13 14 1545186 15 661564 16 661559 17 661559 18 91F-6 19 666858 20 21 514788

Description Ne

Req·

HOSE, Reservoir to Pump - Suction ___ _

TORQUE CONVERTER - (See Index) _ STEERING BOOSTER - (See Index) ___ _

CLAMP, Hose _____________ --------------------ADAPTER UNION __________________________ _

HOSE, Pipe to Booster ______________________ _

HOSE, Pipe to Booster ______ _ ___________ _

"O" RING, Adopter Union ---------------NIPPLE, Hose to Pump ______________________ _

STEERING PUMP - (See Index) _______ _

ADAPTER UNION-------------------------------

PM 2726


123

~ ma:tD CONSTRUCTION MACHINERY DIVISION -

Item Na.

l 2 3 4 5 6 7 8 9

10 11

1 2 4 5 6

7

8

20~---------------~ 9

19

18

17

1s----

15

Part No.

661563

356621 33F-5 531000 31 F-4 712766 2C-624 514610 4E-06 20-06

13 12 TS-2157-P

HYDRAULIC SYSTEM - STEERING - MODEL 75A For ·serial: GAS - 1 CA3419 and thereafter

DIESEL - 1 CB969 and thereafter Na. Item

Description Req'd. No.

HOSE, Pump to Pipe - Pressure ________ 12 RESERVOIR, Hyd. Oil - (See Index) ____ 13 BUSHING, Reservoir Reducing 1 14 ADAPTER UNION ________ ----------------------- 1 15 HOSE, Reservoir to Pump - Suction ____ 1 16 ADAPTER UNION-------------------------------- 1 17 HOSE, Pipe to Reservoir - Return ------ 1

18 BOLT, Pipe to Frame -----------·-------------- 2 PIPE, Steering -------------------------------------- 1 19

LKWSHR, Pipe to Frame ------------------- 2 20

NUT, Pipe to Frame -------------·---------·---- 2 21

Part No.

26F-5

661564 661559 661559 91 F-6 356621

514788


ELBOW, Hose to Pump·----------------------STEERING BOOSTER - (See Index) __ ADAPTER UNION ---··-------- -------------- 2 HOSE, Pipe to Booster --------- ____ ------- l HOSE, Pipe to Booster -------·---------------- l "O" RING, Adapter Union__________________ 2 BUSHING, Pump Reducing __________________ l

TORQUE CONVERTER - (See Index) __ STEERING PUMP - (See Index) _______ _

ADAPTER UNION ----------------- ----- -- -----


124 PM 2726

l

13

Item No.

2

3

3A

4

5

6

6A

7

8

9

10

11

12

13

12

Part No.

2

550700

661560

552152

4E-06

550809

661559

661564

91 F-6

31 F-4

661559

661559

31 F-4

CONSTRUCTION MACHINERY DIVISION -l 4

11 10 9 8

5

--1---1-~-' I I ---

/

1 6

TS-2747-P

HYDRAULI.C SYSTEM - STEERING - MODEL 758

For Serial 6123 thru 6200

No. De,cription Req'd.

ADAPTER UNION ------------------------------------------------------------------------------------------------------

HOSE, Pump Suction ______ . -----------------------------------------------------------------------------------------

BOLT, Pipe Attaching _____ --------------------------------------------------------------------------------------- ___ 2

tLKWSHR, Pipe Attaching ___________________________________ -------------------------------- ________________ ____ 2

PI PE, Steering System ______________ . _____________ ---------------------------------- ___________________________ _

HOSE, Pipe to Booster ______ ----------------------------------------------------------------------------------------- 2

ADAPTER UNION -------------------------------------------------------------------------------------------------------- 2

t"O" RING, Adapter Union ______ --------------------------------------------------··---------------------------- 2

STEERING BOOSTER - (See Index) ------------------------------------------------------

RESERVOIR, Hydraulic Oil - (See Index) ___________________________________________________________ _

ADAPTER UNION -----------------------------------------------------------------------------------------------------

HOSE, Reservoir to Pipe - Suction ___ ---------------------------------------------------------- ------------;-

HOSE, Pump to Pipe - Pressure ______________ ------------------------------------------------------------------- l

ADAPTER UNION ----------------------------------------------------------------------------------------------------

STEERING PUMP - (See Index) _________ --------------------------------------------------- ________ ..

tNot Illustrated

PM 2726


125

parts manual · i' 7.5c711zo parts manual no. 2726 models 75a,b and r tractor shovel...

Documents