partie 1 general en v2018 - spit paslode · 180 fix p6 wirehanger anchor size 6x65p fuk (n/mm2)...
TRANSCRIPT
180
FIX P6
Wirehanger
Anchor size 6X65Pfuk (N/mm2) Min. tensile strength 450fyk (N/mm2) Yield strength 400
Anchors mechanical properties
APPLICATION
Suspended ceiling Light
Fire behaviour
Fire duration 60 min. 120 min.6X65P 0,085* 0,045**Values calculated according to the tech-nical report TR 020 published by EOTA “Evaluation of anchorages in concrete concerning resistance to fire”.
Anchor sizeBase material
6X65Phef 25
Concrete (C20/25)Nrec 1,5NRu,m 6,0Concrete (C30/37)Nrec 1,8NRu,m 7,0Concrete (≥C40/50)Nrec 2,2NRu,m 8,6Concrete rendered (max 5 mm): recommended load reduced to 50%
Anchor sizeBase material
6X65Phef 25
Concrete (C20/25)Vrec 1,4VRu,m 5,6Concrete (C30/37)Vrec 1,7VRu,m 6,8Concrete (≥C40/50)Vrec 1,7VRu,m 6,8Concrete rendered (max 5 mm): recommended load reduced to 50%
Technical dataAnchor size Anchor depth Min. base material
thicknessDrilling depth Drilling diameter Total anchor
lengthCode
(mm) (mm) (mm) (mm) (mm)hef hmin hO dO L
6X65P 25 50 35 6 64 056100
TENSILE
Recommended loads (Nrec, Vrec) and ultimate loads (NRu,m, VRu,m) in kNSHEAR
h0
d0
hmin
hef
L
G8
Anchor size 8X40fuk (N/mm2) Min. tensile strength. 450fyk (N/mm2) Yield strength 400
TENSILE
Ceiling anchor
APPLICATION
Suspended ceiling
h0
d0
hmin
hef
L
Anchor sizeBase material
8X40hef 21
Concrete (C20/25 and C30/37)Nrec 0,6NRu,m 3,2Concrete (≥C40/50)Nrec 0,7NRu,m 4,0Concrete rendered (max 5 mm): recommended load reduced to 50%
Anchor size Anchor depth Min. base material thickness
Drilling depth Drilling diameter Total anchor length
Code
(mm) (mm) (mm) (mm) (mm)hef hmin hO dO L
8X40 21 40 25 8 43 050015
Anchors mechanical properties
Recommended loads (Nrec) and ultimate loads (NRu,m) in kN
Fire behaviour
Fire duration 60 min. 120 min.8X40 0,035* 0,017**Characteristic resistance (kN). Values calculated according to thetechnical report TR 020 published by EOTA “Evaluation of ancho-rages in concrete concerning resistance to fire”.
INSTALLATION
Drilling ø 8, depth 25 mm. Push the anchor home into the hole and hit with the hammer to obtain the embendement of the anchor only reaching the wide part.
Technical data
MAJ 09/18