part no. description price part no. description pricegreenhillmfg.com/htdocs/partlist_white.pdf ·...

Part No. Description Price Part No. Description Price

ELECTRONIC INTERMINTENT CONTROLDG2100S Digi-Cool Controller $359.00Digital electronic controller, Two Stages adjustable from 0 to 99, OF or OC, On and OffTimes from 0 to 99 minutes, indefinite memory of settings, features Smart-Scan. Comes with G240-15B pressure regulator(15 PSI).DG2100T Real-Time Controller $395.00Same as DG2100S above, but comes with Real Time Clock. Also comes with Enable and Disable Times from 12:00AM to 11:59PM.

DG2100S-CT With Stir Fan Port $479.00

Same as DG2100T above, but comes with stir fan relay port and fuse.

DG2100ST Real-Time Sequencer $435.00Digital electronic controller, up to Four Sequenced Zones adjustable from 0 to 99, OF or OC, On and Off Times from 0 to 99 minutes, indefinite memory of settings, features Smart-Scan. Use with GSV24 valve assembly.

GSV24 Sequencer Valve Assm. $57.9524V valve assembly for DG2100ST. Comes with G240-15B preset pressure regulator(15 PSI), G360-24 24V solenoid valve and GFF3/4 flushable filter.

GC1200 Analog Controller $249.00Three user adjustments: On Time 0 to 60 minutes, Off Time 0 to 60 minutes, Actuation Temperature 40O to 100OF. Comes with G240-15B preset pressure regulator(15 PSI).

GC1212 12 Hour Controller $259.00Three user adjustments: On Time 0 to 15 minutes, Off Time 10 minutes to 12 hours, Actuation Temperature 40O to 100OF. Comes with G240-15B preset pressure regulator(15 PSI).NOTE: All controllers with valves come with 2 G220 ¾” swivel adapters and preset pressure regulator.

Automatic controls save labor !!MANUAL CONTROLLER

GC100 $45.00GFF3/4 flushable filter and G240-15B pressure regulator(15 PSI).

KITS

GK100C Drip Cooling Kit With Close-Off $55.00

Includes 100' of G120 ¼" tubing, 20 G130T 1 GPH drippers, 20 G138 ¼" close-offs, and 20 G210 ¼" connector barbs.GK105C $55.00Same as GK100C, but with G135T ½ GPH drippers.

GK110 Spray Cooling Kit $49.00Includes 12 G140 spray nozzles, 8 G150 rotary spray nozzles, and 12 G440 adjustable nozzles.NOTE: All above kits come with 100’ of G110 ½” tubing, 2 G160 ½” close-offs, G170 ½” tee barb, G190 ½” elbow barb, G200 ½” connector barb, G220 ¾” swivel adapter, 30 G260 loop clamps, 34 G270 screws, G283 economy hole punch, 6 G290 hole plugs, and 25 G320 nylon ties.

WIRE

G100-5050' Galvanized steel wire, 16 gauge. $5.50

TUBING

G110 100' ½" polyethylene (0.620 OD x 0.520 ID). $19.80

G110-1000 1000' ½" polyethylene (0.620 OD x 0.520 ID).$181.5

0

G110-50 50' ½" polyethylene (0.620 OD x 0.520 ID). $15.00

G120100' ¼" soft black vinyl(0.220 OD x 0.160 ID). $8.00

GPT250 ¼" polyethylene (0.35OD x 0.25 ID).$0.19/

foot

GRT250¼" clear reinforced (0.375 OD x 0.250 ID).

$0.49/foot

GRT-250-UV-BLUE

¼" blue, UV-protected, reinforced (0.375 OD x 0.250 ID).

$0.45/foot

GRT500 ½" clear reinforced (0.750 OD x 0.500 ID). $0.58

G125 ¼” semi-rigid poly tubing (0.160 ID). $0.55

(414) 529-09008827 Garden Lane, Greendale WI, 53129 Page 1www.greenhillmfg.com partlist_white_8.5x11-R3.odt - SEMTP – 010420

:. F ir st Stage

Second Sta ge

1 - Zo ne 1 Acti ve2 - Zo ne 2 Acti ve3 - Zo ne 3 Acti ve+ - Act ive Temp Rea che d

:. F i rs t S t age

S ec on d S t ag e

1 - Z on e 1 A c t i v e2 - Z on e 2 A c t i v e3 - Z on e 3 A c t i v e+ - A c ti v e Tem p R e ac he d

:. First St age

Sec ond Stage

1 - Zone 1 Active2 - Zone 2 Active3 - Zone 3 Active+ - Active Temp Reached

60

10

30

50

60

10

30

50

40 100

50

70

90


30" lengths. Use with drippers, sprayers, and foggers. Eliminates need for wires, weights, or brackets. Stiff tubing resists swaying—Stays in proper location over pens.

COOLING NOZZLESDRIP NOZZLE

G130TThree-piece take-apart dripper, blue/black disk, 1 GPH @ 15 PSI.

$0.55

G130T-100 G130T, 100 pack. $46.20

G130T-1000 G130T, 1000 pack. $395.00

G135TThree-piece take-apart dripper, white/orange disk, ½ GPH @ 15 PSI.

$0.55

G135T-100 G135T, 100 pack. $46.20

G135T-1000 G135T, 1000 pack. $434.50

G135PC ½ GPH drip nozzle, pressure compensating. $0.65

G135PC-100 G135PC, 100 pack. $54.45

G131TTwo-piece take-apartdripper, 1 GPH @ 15 PSI.

$0.44

CLOSE-OFF

G138 Close-off/regulate G120 ¼" tubing. $0.28

G138-100 G138, 100 pack. $24.75

G160 Close-off/regulate G110 ½" tubing. $0.33

G160-1000 G160, 1000 pack. $275.00

CAPS FOR 10-32 FITTING

G13911/32" nozzle cap x 10-32 FT. $0.77

G139-18 11/32" nozzle cap x 1/8" FPT. $1.05

G149 ¼” FPT x 10-32 FT. $0.77

G147 ½” FPT x 10-32 FT. $0.44

REDUCER BUSHINGG146 ½” MPT x 10-32 FT. $0.77

SPRAY NOZZLE (180O) 10-32t

G140 3’ radius, 12 GPH @ 15 PSI, black. $0.55

G140-100 G140, 100 pack. $49.50

G143 3’ radius, 17 GPH @ 15 PSI , green. $0.55

G143-100 G143, 100 pack. $49.50

G145 3’ radius, 6 GPH @ 15 PSI, brown. $0.55

G145-100 G145, 100 pack. $49.50SPRAY NOZZLE (90O) 10-32t

G141 3’ radius, 12 GPH @ 15 PSI, black. $0.55

G142 3’ radius, 17 GPH @ 15 PSI , green. $0.55

G144 3’ radius, 6 GPH @ 15 PSI, brown. $0.55

TAP/DRILL BITG148- 10-32T

Drills then taps holes, 10-32t. $22.00

TIP! Use the G148-10-32T tap for big savings by eliminating the glued PVC fittings.

G148-¼NPT Drills then taps holes, ¼" NPT. $82.50

G148-1/8NPTDrills then taps holes, 1/8" NPT. $69.30

ADJUSTABLE 8-STREAM NOZZLE

G440 12" max. diameter, 10-32 MT. $0.45

G440-100 G440, 100 pack. $43.20

G440B 12" max. diameter, ¼" barb. $0.45

ROTARY SPRAY NOZZLE (360O)G150- 10-32T

8' diameter, 9 GPH @ 15 PSI, 10-32t. $2.70

G150-100 G150-10-32T, 100 pack. $251.90

G150-1/2"MPT

8' diameter, 9 GPH @ 15 PSI, ½" MPT. $3.36



G150-1/2"-100

G150-1/2"MPT, 100 pack. $324.50

G150B 8' diameter, 9 GPH @ 15 PSI, ¼" barb. $2.70

CLEANING NOZZLESROTARY CLEANING NOZZLE(360O)

G151-10-32T

31' diameter, 22.5 GPH@ 30 PSI, 10-32t. $2.81

G151-10-32T-100

G151-10-32T, 100 pack. $262.90

G151-1/2"MPT

31' diameter, 22.5 GPH@ 30 PSI, ½" MPT.

$3.25

G151-1/2"MPT-100

G151-1/2"MPT, 100 pack. $311.30

G151B31' diameter, 22.5 GPH@ 30 PSI, ¼" barb. $2.04

The G150 & G151 series nozzles are available in ½" MPT, 3/8" MPT, 10-32t, and ¼" barb. Please consult factory for different configurations.

BALL*CLEAN NOZZLE

GSC3412½" or ¾" pipe, ¼" MPT outlet, with shut off.

$2.45

G546-14 ¼" x ¼" brass coupling. $0.45

GBC14116-2 Ball*Clean flex nozzle, ¼" MPT x 1/16" nozzle. $6.50

Point the Ball*Clean nozzle at buildup and watch it disappear!! A timer should be used to turn the nozzle onfor 1 (one) minute and off for about 12 hours!!

LEAK PREVENTION DEVICE

G150-10Prevent leakage from G150. Open: 20-25 PSI; Closed: 14-18 PSI.

$2.55

G211 Barbed leak prevention device. $3.36

¼” barb x ¼” barb used in place of G210.

TEEG170 ½” barb(x3), 15 PSI. $0.50

G175 ¼” barb(x3), 15 PSI. $0.33

G180 ½” comp(x3), 60 PSI. $1.05

ELBOW

G185 ½” comp x ½” comp, 60 PSI. $0.99

G190 ½” barb x ½” barb, 15 PSI. $0.50

G195 ¼” barb x ¼” barb, 15 PSI. $0.30

CONNECTOR

G200 ½” barb x ½” barb, 15 PSI. $0.44

G210 ¼" barb x ¼" barb, 15 PSI. $0.28

G330 ½” comp x ½” comp, 60 PSI. $0.94

ADAPTERG215 ¼” barb x 10-32 MT. $0.39

G216 10-32 male x 10-32 MT. $0.39

G220 ½" comp x ¾" FGHT, 60 PSI. $0.94

Adapter with washer. No clamp required.

G230½" comp x ¾" MGHT, 60 PSI. No clamp required.

$0.94

G222 ¼" barb x ¾” FGHT, with G221 hose screen. $1.49

G260 5/8" loop clamp. $0.10

G265 Nail clamp. Holds ¼” tubing. $0.11

G270 #10 x ¾”. $0.11

HOLE PUNCHG283 Economy hole punch. $0.88

G280 Makes ¼” hole in polytube. $2.86


Orange

Green


G285 For serious hole punching. $31.90

G285-1B Replacement Punch forG285 above. $13.20

G290 Hole plug. $0.06

G320 8” long nylon tie. $0.11

PRESSURE REGULATOR

G240-10 ¾" FGHT x ¾" MGHT, 10 PSI. $10.45

G240-15B ¾" FGHT x ¾" MGHT, 15 PSI. $10.45

G240-20B ¾" FGHT x ¾" MGHT, 19 PSI. $10.45

G240-K3Pressure regulator kit includes 10, 15, and 20 PSI regulators above.

$26.95

G255 0-30 PSI, 1/4” ports and 2 plugs $34.95

G2560-30 PSI, with Schrader Gauge Valve¾” FGHT x ¾” MGHT

$54.95

G257Reg.0-30 PSI, with 0-30 PSI gauge¾” MGHT x ¾” FGHT

$74.95

"Y" CONNECTOR

G340 ¾" MGHT x ¾" MGHT x ¾" FGHT. $1.98

HOSE END

G3495/8" x ¾" FGHT - ¾" hose. $2.50

G3515/8" x ¾" MGHT - ¾" hose. $2.50

GARDEN HOSE WASHERSG221 Hose screen. $0.28

G223 ¾" washer, garden, plain. $0.11

BALL VALVESG348 ½" comp x ½" comp. $2.75

G350 ½" MGHT x ¾" FGHT. $2.50

GBV12T ½" FPT x ½" FPT. $3.19GBV12S ½" slip x ½" slip. $3.19GBV34T ¾" FPT x ¾" FPT. $3.70GBV34S ¾" slip x ¾" slip. $3.70

GBV3434TH45B

¼ turn ball valve, ¾" MGHT x ¾" MPT. $7.75

SOLENOID VALVEG360 110V coil, ¾" FPT. $58.25

G360-2424V coil, ¾" FPT. (Maximum flow rate - 20 GPM.)

$46.75

G360-1-24V

24V coil, 1" FPT. (Maximum flow rate - 40 GPM.)

$117.65

G360-1.5-24V

24V coil, 1.5" FPT. (Maximum flow rate - 150 GPM.)

$167.15

FLUSH VALVE (Quick Dump)

G370-1H ¾" FGHT, 1 PSI, whiteplunger. $3.85

G370-2H ¾" FGHT, 2 PSI, blackplunger. $3.85

FULL FLOW VALVE

G217 ¼" valve, 10-32t x 10-32t. $1.21

G217B ¼" valve, ¼" barb x ¼"barb. $1.21

PVC FITTINGSFor all PVC parts, take a 10% discount for packs of 10 and a 15% discount for packs of 100! 100!

PVC CROSS

G420-005 ½" slip x ½" slip x ½" slip x ½" slip. $0.78

G420-007 ¾" slip x ¾" slip x ¾" slip x ¾" slip. $1.33

G420-010 1" slip x 1" slip x 1" slip x 1" slip. $1.60

PVC TEE, SLIP X SLIP X SLIP

G401-005 ½" slip x ½" slip x ½" slip. $0.49



G401-007 ¾" slip x ¾" slip x ¾" slip. $0.53

G401-010 1" slip x 1" slip x 1" slip. $0.49

G401-074 ½" slip x ½" slip x ¾" slip. $0.65

G401-094 ¾" slip x ½" slip x ½" slip. $0.60

G401-095 ¾" slip x ½" slip x ¾" slip. $0.60

G401-101 ¾" slip x ¾" slip x ½" slip. $0.71

G401-102 ¾" slip x ¾" slip x 1" slip. $1.20

G401-124 1" slip x ¾" slip x ½" slip. $1.20

G401-125 1" slip x ¾" slip x ¾" slip. $1.20

G401-126 1" slip x ¾" slip x 1" slip. $1.20

G401-130 1" slip x 1" slip x ½" slip. $0.70

G401-131 1" slip x 1" slip x ¾" slip. $0.75

For all PVC parts, take a 10% discount for packs of 10 and a 15% discount for packs of 100!

PVC TEE, SLIP X SLIP X FPT

G402-005 ½" slip x ½" slip x ½" FPT. $0.62

G402-007 ¾" slip x ¾" slip x ¾" FPT. $0.95

G402-010 1" slip x 1" slip x 1" FPT. $1.15

G402-071 ½" slip x ½" slip x 1/8"

FPT. $1.13

G402-072 ½" slip x ½" slip x ¼" FPT. $1.70

G402-074 ½" slip x ½" slip x ¾" FPT. $0.87

G402-094 ¾" slip x ½" slip x ½" FPT. $0.62

G402-095 ¾" slip x ½" slip x ¾" FPT. $0.62

G402-101 ¾" slip x ¾" slip x ½" FPT.$0.77

G402-124 1" slip x ¾" slip x ½" FPT. $1.15

G402-125 1" slip x ¾" slip x ¾" FPT. $1.15

G402-130 1" slip x 1" slip x ½" FPT. $1.07

G402-131 1" slip x 1" slip x ¾" FPT. $1.13

G402-071C ½" comp x ½" comp x 1/8" FPT, 60 PSI. $1.30

PVC TEE, SLIP X FPT X SLIP

G403-005 ½"slip x ½" FPT x ½"slip. $0.41

G403-007 ¾" slip x ¾" FPT x ¾"slip $0.63

G403-095 ¾"slip x ½" FPT x ¾"slip. $0.63

PVC SIDE OUTLET

G414-005 ½" slip x ½" slip x ½" FPT. $5.96

PVC ELBOW, SLIP x SLIPG406-005 ½" slip x ½" slip. $0.41G406-007 ¾" slip x ¾" slip. $0.49G406-010 1" slip x 1" slip. $0.77G406-101 ¾" slip x ½" slip. $0.50G406-130 1" slip x ½" slip. $0.73G406-131 1" slip x ¾" slip. $0.87

PVC ELBOW, SLIP x FPTG407-005 ½" slip x ½" FPT. $0.59G407-007 ¾" slip x ¾" FPT. $0.71G407-010 1" slip x 1" FPT. $0.75G407-074 ½" slip x ¾" FPT. $0.75G407-101 ¾" slip x ½" FPT. $0.37G407-130 1" slip x ½" FPT. $1.00G407-131 1" slip x ¾" FPT. $2.65

PVC COUPLING, SLIP x SLIPG429-005 ½" slip x ½" slip. $0.32G429-007 ¾" slip x ¾" slip. $0.40G429-010 1" slip x 1" slip. $0.62G429-101 ¾" slip x ½" slip. $0.40G429-131 1" slip x ¾" slip. $0.68PVC FEMALE ADAPTER, SLIP x FPT



G435-005 ½" slip x ½" FPT. $0.49G435-007 ¾" slip x ¾" FPT. $0.62G435-010 1" slip x 1" FPT. $0.62G435-074 ½" slip x ¾" FPT. $0.54G435-101 ¾" slip x ½" FPT. $0.54G435-102 ¾" slip x 1" FPT. $0.65G435-130 1" slip x ½" FPT. $0.65G435-131 1" slip x ¾" FPT. $0.65

PVC UNIONG457-005 ½" slip x ½" slip. $2.38G457-007 ¾" slip x ¾" slip. $4.55G457-010 1" slip x 1" slip. $4.45

For all PVC parts, take a 10% discount for packs of 10 and a 15% discount for packs of 100!

PVC REDUCER BUSHING, SLIP x FPTG438-071 ½" slip x 1/8" FPT. $0.57G438-072 ½" slip x ¼" FPT. $0.57G438-073 ½" slip x 3/8" FPT. $0.57G438-098 ¾" slip x ¼" FPT. $0.59G438-101 ¾" slip x ½" FPT. $1.61G438-130 1" slip x ½" FPT. $0.65G438-131 1" slip x ¾" FPT. $0.65

PVC ADAPTER, SLIP x MPTG436-005 ½" slip x ½" MPT. $0.40G436-007 ¾" slip x ¾" MPT. $0.53G436-010 1" slip x 1" MPT. $0.71G436-101 ½" slip x ¾" MPT. $0.40G436-074 ¾" slip x ½" MPT. $0.45G436-131 ¾" slip x 1" MPT. $1.33G436-102 1" slip x ¾" MPT. $0.62

½" SLIP ADAPTER

GA2-620 ½" slip x 0.620" comp, green. $0.35

GA2-350 ½" slip x 0.350" comp, black. $0.35

GA2-250 ½" slip x 0.250" comp, red. $0.35

GA2-500 ½" slip x 0.500" comp, grey. $0.35

PVC CAPG447-005 ½" slip. $0.40G447-007 ¾" slip. $0.49G447-010 1" slip. $0.98

STRAINER BOWL ASSEMBLY

GS100Four piece clear strainer bowl assembly. ½" MPT x ½" MPT. 80 mesh screen.

$8.95

GS100-1 Clear bowl (see through). $4.45

GS100-1B Black bowl (not see through). $4.75

GS100-2 Screen, 80 mesh. $3.75GS100-3 Gasket. $0.75

FLUSHABLE FILTER

GFF3/4 ¾" MPT x ¾" MPT, back flush valve FGHT. $18.95

No need for costly replacement filter cartridges. Just by flicking the valve handle 90O every few days, water rushes across the filter, flushing the collected debris off the filter surface and renewing the filter.

REPLACEMENT FILTER ELEMENTSGFFRFE-50 50 mesh poly, blue. $13.95GFFRFE-75 75 mesh, white. $13.95GFFRFE-150

150 mesh, black, standard. $5.79

GFFRFE-150SS

150 mesh stainless steel. $6.49

WINTER SYSTEM PARTSCROSS

CRG1/2 ½" galvanized cross. $5.98CRG3/4 ¾" galvanized cross. $9.30CRP ½" plastic cross. $10.98Special plastic cross with valve ports angled down at 20O for good drainage to help prevent freezing.

YG1/2 ½" galvanized "Y". $7.89YG3/4 ¾" galvanized "Y". $9.49



GROUND FAULT INTERRUPTER

GROUND FAULT INTERR

GFIO15A15 amp capacity, fits into standard electrical box.

$19.00

When there is water and electricity in the same area a Ground Fault Interrupter should be used. Because of the potential forshock, HEATSOCKS & HEATTAPES must be connected to a ground fault interrupter circuit!

ADAPTER KIT

GHB 3412K

¾" MPT x ½" polyethylene pipe compression.

$19.95

Allows heatsock to be used with ½" black poly pipe. Replaces PVC barbed fitting with brass (¾" MPT) compression.

HEATSOCKHS3 3 ft, 30 Watts. $62.95HS4 4 ft, 40 Watts. $71.95HS5 5 ft, 50 Watts. $81.95HS6 6 ft, 60 Watts. $90.95HS7 7 ft, 70 Watts. $100.95HS8 8 ft, 80 Watts. $109.95HS9 9 ft, 90 Watts. $119.95HS10 10 ft, 100 Watts. $128.95HS25 25 ft, 125 Watts. $270.95HS50 50 ft, 250 Watts. $506.95Please consult factory for other lengths.

Greenhill states that because of the ever present potential for shock when you have water and electricity in the same area, the above circuits must be connected to a ground fault interrupter circuit.

HEATTAPESHT10 10 ft, 100 Watts. $93.00HT25 25 ft, 250 Watts. $198.00HT50 50 ft, 500 Watts. $373.00

HT125 125 ft, 1250 Watts. $898.00

NYLON FITTINGS

For all nylon parts, take a 10% discount for packs of 10 and a 15% discount for packs of 100!

STREET ELBOWGSE1414 ¼" MPT x ¼" FPT. $3.10GSE1212 ½" MPT x ½" FPT. $2.60GSE3434 ¾" MPT x ¾" FPT. $3.20GSE100100 1" MPT x 1" FPT. $4.50SWIVEL, BARBED ADAPTER (Ball)

GNC1414 ¼" FPT x ¼" barb. $0.55GNC3814 3/8" FPT x ¼" barb. $0.70GNC3838 3/8" FPT x 3/8" barb. $0.65GNC1214 ½" FPT x ¼" barb. $0.75GNC1238 ½" FPT x 3/8" barb. $0.75GNC1212 ½" FPT x ½" barb. $0.75

SWIVEL, BARBED ADAPTER, FPT(Washer)

GNC 1214W

½" FPT x ¼" barb. $0.95

GNC1214W-SS

½" FPT x ¼" stainless steel barb. $1.65

GNC1214-WASHER

Replacement washer for GNC1214W. $0.45

SWIVEL, BARBED ADAPTER,GARDEN HOSE (Washer)

GB3414 ¾" FGHT x ¼" barb. $0.90GB3438 ¾" FGHT x 3/8" barb. $0.90GB3412 ¾" FGHT x ½" barb. $0.90GB3458 ¾" FGHT x 5/8" barb. $0.95GB3434 ¾" FGHT x ¾" barb. $0.95For more washers, see GARDEN HOSE WASHERS.

BARBED ADAPTER, MALETHREAD, NYLON

GA18316 1/8" MPT x 3/16" barb. $0.40(414) 529-09008827 Garden Lane, Greendale WI, 53129 Page 7www.greenhillmfg.com partlist_white_8.5x11-R3.odt - SEMTP – 010420

N E W !


GA1814 1/8" MPT x ¼" barb. $0.40GA18516 1/8" MPT x 5/16" barb. $0.40GA1838 1/8" MPT x 3/8" barb. $0.40GA14316 ¼" MPT x 3/16" barb. $0.40GA1414 ¼" MPT x ¼" barb. $0.40GA14516 ¼" MPT x 5/16" barb. $0.40GA1438 ¼" MPT x 3/8" barb. $0.40GA1412 ¼" MPT x ½" barb. $0.45GA3814 3/8" MPT x ¼" barb. $0.45GA38516 3/8" MPT x 5/16" barb. $0.45GA3838 3/8" MPT x 3/8" barb. $0.45GA3812 3/8" MPT x ½" barb. $0.45GA3858 3/8" MPT x 5/8" barb. $0.45GA12316 ½" MPT x 3/16" barb. $0.45GA1214 ½" MPT x ¼" barb. $0.45GA1238 ½" MPT x 3/8" barb. $0.45GA1212 ½" MPT x ½" barb. $0.50GA1258 ½" MPT x 5/8" barb. $0.50GA1234 ½" MPT x ¾" barb. $0.55GA12100 ½" MPT x 1" barb. $0.55GA3414 ¾" MPT x ¼" barb. $0.55GA3438 ¾" MPT x 3/8" barb. $0.55GA3412 ¾" MPT x ½" barb. $0.55GA3458 ¾" MPT x 5/8" barb. $0.55GA3434 ¾" MPT x ¾" barb. $0.55GA34100 ¾" MPT x 1" barb. $0.70GA10034 1" MPT x ¾" barb. $0.70GA100100 1" MPT x 1" barb. $0.75GD3414 ¾" MGHT x ¼" barb. $0.65GD3438 ¾" MGHT x 3/8" barb. $0.65GD3412 ¾" MGHT x ½" barb. $0.65GD3458 ¾" MGHT x 5/8" barb. $0.70GD3434 ¾" MGHT x ¾" barb. $0.75GD34100 ¾" MGHT x 1" barb. $1.00


BARBED ADAPTER, FEMALETHREAD, NYLON

GAF1414 ¼" FPT x ¼" barb. $1.40GAF1438 ¼" FPT x 3/8" barb. $1.40

GAF3814 3/8" FPT x ¼" barb. $1.50GAF3838 3/8" FPT x 3/8" barb. $1.50GAF3812 3/8" FPT x ½" barb. $1.50GAF1214 ½" FPT x ¼" barb. $1.50GAF1238 ½" FPT x 3/8" barb. $1.55GAF1212 ½" FPT x ½" barb. $1.05GAF1258 ½" FPT x 5/8" barb. $1.55GAF1234 ½" FPT x ¾" barb. $1.55GAF3438 ¾" FPT x 3/8" barb. $1.65GAF3412 ¾" FPT x ½" barb. $1.70GAF3458 ¾" FPT x 5/8" barb. $1.70GAF3434 ¾" FPT x ¾" barb. $1.75

BARBED ADAPTER, ELBOWGEL1814F 1/8" FPT x ¼" barb. $1.55GEL1838F 1/8" FPT x 3/8" barb. $1.55GEL14316F ¼" FPT x 3/16" barb. $1.55GEL1414F ¼" FPT x ¼" barb. $1.55GEL1438F ¼" FPT x 3/8" barb. $1.60GEL3814F 3/8" FPT x ¼" barb. $1.65GEL3838F 3/8" FPT x 3/8" barb. $1.65GEL3812F 3/8" FPT x ½" barb. $1.65GEL1258F ½" FPT x 5/8" barb. $1.75GEL1234F ½" FPT x ¾" barb. $1.75GEL3412F ¾" FPT x ½" barb. $1.30GEL3458F ¾" FPT x 5/8" barb. $1.30GEL3434F ¾" FPT x ¾" barb. $1.30GEL1414HB ¼" barb x ¼" barb. $0.55GEL3814HB 3/8" barb x ¼" barb. $0.90GEL3838HB 3/8" barb x 3/8" barb. $0.55GEL1214HB ½" barb x ¼" barb. $0.60GEL1238HB ½" barb x 3/8" barb. $0.60GEL1212HB ½" barb x ½" barb. $0.60GEL5858HB 5/8" barb x 5/8" barb. $0.60GEL3458HB ¾" barb x 5/8" barb. $0.95GEL3434HB ¾" barb x ¾" barb. $0.70GEL100100HB

1" barb x 1" barb. $1.15

HOSE MENDERS, NYLONGHM1818 1/8" barb x 1/8" barb. $0.35GHM14316 ¼" barb x 3/16" barb. $0.35GHM1414 ¼" barb x ¼" barb. $0.40GHM516516 5/16" barb x 5/16" barb. $0.40



GHM3814 3/8" barb x ¼" barb. $0.45GHM1214 ½" barb x ¼" barb. $0.35GHM1238 ½" barb x 3/8" barb. $0.45GHM1212 ½" barb x ½" barb. $0.55GHM5838 5/8" barb x 3/8" barb. $0.35GHM5858 5/8" barb x 5/8" barb. $0.60

TEE, NYLON

GT18 1 2 3 1/8"

barb OD(x3). $0.85

GT14 ¼” barb OD(x3). $0.70GT38 3/8" barb OD(x3). $0.75GT12 ½" barb OD(x3). $0.80GT58 5/8" barb OD(x3). $0.80GT34 ¾" barb OD(x3). $1.00GT100 1" barb OD(x3). $1.40GT1438 ¼" x 3/8" x 3/8" OD. $0.80GT3812 3/8" x ½” x ½” OD. $0.75GT3858 3/8" x 5/8" x 5/8" OD. $0.75GT1238 ½" x 3/8" x 3/8" OD. $0.80GT3412 ¾" x ½" x ½" OD. $1.50

GTY14 "Y," ¼" x ¼" x ¼” barb

$0.90

GTY38 “Y,” 3/8”x3/8”x-3/8” barb $1.35

GTY12 "Y," 1/2”x 1/2”x1/2” barb $1.65

REDUCER BUSHING, NYLONGRB1810 1/8" MPT x 10-32t. $0.85GRB1418 ¼" MPT x 1/8" FPT. $0.85GRB3818 3/8" MPT x 1/8" FPT. $0.90GRB3814 3/8" MPT x ¼" FPT. $0.85GRB1218 ½" MPT x 1/8" FPT. $0.85GRB1214 ½" MPT x ¼" FPT. $0.95GRB1238 ½" MPT x 3/8" FPT. $0.90GRB3418 ¾" MPT x 1/8" FPT. $1.15GRB3414 ¾" MPT x ¼" FPT. $0.95GRB3438 ¾" MPT x 3/8" FPT. $1.00GRB3412 ¾" MPT x ½" FPT. $0.95GRB10012 1" MPT x ½" FPT. $1.40GRB10034 1" MPT x ¾" FPT. $1.65


ADAPTER, GARDEN HOSE TO PIPEGE3438 ¾" MGHT x 3/8" MPT. $0.45GE3412 ¾" MGHT x ½" MPT. $0.45GE3434 ¾" MGHT x ¾" MPT. $0.50GG3414 ¾" MGHT x ¼" FPT. $1.45GG3412 ¾" MGHT x ½" FPT. $1.30GG3434 ¾" MGHT x ¾" FPT. $1.30GH3434 ¾" MPT x ¾" FGHT. $1.70GI3434 ¾" MGHT x ¾" FGHT. $1.30

COUPLING, NYLONGFC1212 ½" FPT x ½" FPT. $1.80GFC3434 ¾" FPT x ¾" FPT. $1.85GFC100100 1" FPT x 1" FPT. $2.25GRC3814 3/8" FPT x ¼" FPT. $1.80GRC3412 ¾" FPT x ½" FPT. $1.85GRC111618 11/16" thread x 1/8" FPT. $0.95GJ3412 ¾" FGHT x ½" FPT. $1.40

REDUCING NIPPLE, NYLONGRM1418 ¼" MPT x 1/8" MPT. $0.65GRM3818 3/8" MPT x 1/8" MPT. $0.75GRM3814 3/8" MPT x ¼" MPT. $0.80GRM1218 ½" MPT x 1/8" MPT. $0.75GRM1214 ½" MPT x ¼" MPT. $0.80GRM1238 ½" MPT x 3/8" MPT. $1.05GRM3438 ¾" MPT x 3/8" MPT. $1.40GRM3412 ¾" MPT x ½" MPT. $1.05

CLOSE NIPPLES, NYLONGM1818 1/8" MPT x 1/8" MPT. $0.45GM1414 ¼" MPT x ¼" MPT. $0.50GM3838 3/8" MPT x 3/8" MPT. $0.60GM1212 ½" MPT x ½" MPT. $0.60GM3434 ¾" MPT x ¾" MPT. $0.70GM100100 1" MPT x 1" MPT. $1.15

PIPE PLUG/CLOSE OFF BUSHINGGF18 1/8" MPT. $0.45GF14 ¼" MPT. $0.50GF38 3/8" MPT. $0.50GF12 ½" MPT. $0.55


3

1

2


GF34 ¾" MPT. $0.55GF100 1" MPT. $0.70

FLOOD STOPPER

GFS34 ¾" MGHT x ¾" FGHT. $9.95

GFS34K Flood stopper kit. $13.951 GE3434, 1 GFS34 flood stopper, 1 GG3434, and 1 two foot hose assembly with ¾" FGHT x ¾" MPT.

FOG NOZZLE, 1/8" MPT

G554FL 0.44 GPH @ 60 PSI, with filter, white. $4.50

G560FL 1.0 GPH @ 60 PSI, with filter, grey. $2.10

G560FL-100 G560FL, 100 pack. $200.00

G565FL 1.5 GPH @ 60 PSI, with filter, cream. $2.10

G565FL-100 G565FL, 100 pack. $200.00

G567FL 1.9 GPH @ 60 PSI, with filter, blue. $2.10

G567FL-100 G567FL, 100 pack. $200.00

G559FL Foam filter, 80 micron, 0.875" long. $0.30

G559FL-100 G559FL, 100 pack. $19.00

GORING-01E

O-ring for GRC111618and Greenhill 1/8" fog nozzles above.

$0.15

GORING-01E-100

GORING-01E, 100 pack. $13.50

GRC111618Use GRC111618 coupling to adapt 1/8" MPT fog nozzle to 11/16" thread.

$0.95

GRC111618-100

GRC111618, 100 pack. $90.00

FOG NOZZLE LINE

GFA-412P

Complete fog nozzle line with swaged ferrules, standard ½" FPT swivel, and 4 nozzles.

$19.50

GFA-612P


$31.50

GFA-812P


$33.50

GFA-1012P


$37.50

Please consult factory for other lengths.

NOTE: All fog nozzle lines come with 3 times as many G320 nylon ties as nozzles.

DROP-IN SYSTEM

GND-F2.0 Flat nozzle, .20 GPM @ 10 PSI, red. $1.25

GND-F2.5 Flat nozzle, .25 GPM @ 10 PSI, brown. $1.25

GND-F3.0 Flat nozzle, .30 GPM @ 10 PSI, gray. $1.25

GND-F4.0 Flat nozzle, .40 GPM @ 10 PSI, white. $1.25

GND-F5.0 Flat nozzle, .50 GPM @ 10 PSI, light blue. $1.25

GND-F7.5 Flat nozzle, .75 GPM @ 10 PSI, lime green. $1.25

GSCN-1.4GPH

Drop-in fog nozzle, 1.4GPH @ 100 PSI, white. $2.10

GSCN-1.8NGPH

Drop-in fog nozzle, 1.8GPH @ 100 PSI, cream.

$2.10

GSCN-2GPH

Drop-in fog nozzle, 2 GPH @ 100 PSI, green. $2.10


N E W !

N E W !

N E W !


GAD 111614M

Adapter, 11/16" to ¼" MPT. $0.45

*G271 Screw, #14 x ¾" stainless steel. $0.45

GSC12-1 Saddle clamp, ½" pipe. $2.19

GSC34-1 Saddle clamp, ¾" pipe. $2.19

*GSC- O-RING Saddle clamp o-ring. $0.55

*GSC-Adapter

Adapter, 11/16" to saddle clamp. $1.79

*GSC-NUT Nut, attaches nozzle to 11/16" clamp. $0.30

GSC-CAP Cap. $0.50

GSC-WNUT

Optional, instead of GSC-NUT. $0.75

*GSC12-ASSM

Assembly: Comes with all * and GSC12-1. $4.75

*GSC34-ASSM

Assembly: Comes with all * and GSC34-1. $4.75

GSC-SCRN-50

Optional, screen 50 mesh. $1.05

GSC-SCRN-100

Optional, screen 100 mesh. $0.90

GSC-SCRN-50C

Optional, screen 50 mesh with check. $2.55

GSC-SCRN-100C

Optional, screen 100 mesh with check. $2.55

SADDLE CONNECTOR

GSC3412½" or ¾" pipe, ¼" MPT outlet, with shut off.

$2.45

GSC 3412W-1

Replacement washer for GSC3412.

$0.45

PINCH HOSE CLAMP

GHC63/8" diameter, steel, foruse with GPT250. $0.10

GHC8 ½" diameter, steel, for use with GRT250. $0.15

GHCN8 ½" diameter, nylon, foruse with GRT250. $0.30

GHCN12 ¾" diameter, nylon, foruse with GRT500. $0.70

DROP LINE

GDR-6 6' reinforced clear. $9.50+0.49foot

GDR-6-UV 6' reinforced blue, UV resistant.$5.25 +

0.35/foot

QUANTITY DISCOUNTS ON ALL PARTS FOR 100 AND 1000 PACKS. CALL FOR PRICING.

COMP = Compression connector MGHT = Male garden hose threadFGHT = Female garden hose thread MPT = Male pipe threadFPT = Female pipe thread MT = Male threadFT = Female thread OD = Outer diameterGPH = Gallons per hour SLIP = PVC glueID = Inner diameter

Terms are: Payment with order or C.O.D.; Orders shipped by U.P.S.; If a check is enclosed with order, Greenhill Manufacturing will pay the U.P.S. Charges.

WI residents add 5% sales tax or WI Tax Exempt Form S206.

SHIPPING ADDRESSName: ____________________________

Address: __________________________

City: _________ State: _____ Zip: _____

Phone: __________

ONE YEAR WARRANTY: Greenhill Manufacturing warrants its controller and system parts against defects in material or workmanship for one (1) year after the purchase date. If a defect is found during the warranty period, simply return it prepaid, and the controller will be repaired or replaced. For the second year of operation the unit will be


Part No. Description Price Part No. Description Price repaired at a flat fee of $45.00. The above coverage is void if damage is caused by freezing or chewing. Specifications subject to change.


1/2“ Polytube System

G220swiveladapter

G1601/2“ close-off

G1101/2“ polytube

Make hole inpolytube w/hole punch

G285(seriouspunch)

G280(betterpunch)

G283(goodpunch)

Push in:

G130TG135T

, 1 GPHor , 1/2 GPH @ 15 PSI drip nozzle

G151B, 22.5 GPH @ 30 PSI, 31’ Dia360 nozzleo

G150B, 9 GPH@ 15 PSI, 8’Dia 360 nozzleo

PVC System, Glued, 3/4“ Pipe

Screw in ,1/2“ MPT x 10-32Treducer bushing

GRB1210

Screw in , 12 GPH @ 15 PSI, 3’ Rad 180 nozzle

G140o

Glue PVC tee to 3/4“PVC pipe

G402-101

Note: Reducer bushing ornipple & cap convert system for use with 10-32T parts.

G402-1013/4“S x 3/4”Sx 1/2” FPT

Screw in:

G151-1/2“MPT,9 GPH @ 15PSI, 8’ Dia360 nozzleo

G150-1/2“MPT,9 GPH @ 15PSI, 8’ Dia 360nozzle

o

Screw in , 1/2“ MPT x 1/2” MPT nipple

GM12

Screw on , 1/2“ FPT x 10-32 FT cap

G147

PVC Econo System

Drill/tap hole in PVC pipe using

tap/drill bitG148-10-32T

G429-0073/4“ PVCcoupling

3/4“ PVC pipe

Push in:

G150-10-32T,8’ Dia, 9 GPH@ 15 PSI360 nozzleo

G140 G143G145

, , or ,3’ Rad, @ 15 PSI180 nozzleo

G440,adjustable8-streamnozzle, 12“max. dia

Screw in:

G130TG135T

, 1 GPH or , 1/2 GPH @ 15 PSI drip nozzle

(10-32 thread)

G151-10-32T,22.5 GPH @ 30 PSI, 31’ Dia360 nozzleo

part no. description price part no. description pricegreenhillmfg.com/htdocs/partlist_white.pdf ·...

Documents