part – iii price bid office/01022011... · end cost in rs. (3 x 12 ) total ... 5bpi clamp...

Sign & seal of Bidder 1

GUJARAT ENERGY TRANSMISSION CORPORATION LIMITED

SARDAR PATEL VIDYUT BHAVAN RACE COURSE, VADODARA - 390 007

TENDER FOR

Erection , Supply of minor items/hardware materials, Testing and commissioning of 220/132/66KV Substation Equipments provided by GETCO excluding Civil works and C & R Panels & SCADA at 220KV Sadla S/S.

TENDER NO: GETCO / Erection /220KV Sadla/27

PART – III

Price Bid


This page has been kept intentionally Blank.


ANNEXURE – A to Bidding schedule for supply prices Name 0f Substation :---------------------

Sr. No.

Description

Qty.

In

Nos.

Rate unit Ex Works

Unit F.O.R. in

Rs.

(4 + 5+6)

Excise duty.

% as well as amount

Sale Tax

% as well as amount

CST = ON (4+9)

VAT = ON (4+9)

Unit end Cost Price in Rs.

(7+9+11)

Total Amount

in Rs

Frei-ght charges

Insu ranc

e

charges

10 11

Rate in %

1 2 3 4

5

6

7 8

Rate in % of Ex-Works

price

9

Unit E.D.

Amount Rs. CST VAT

Total

amount Rs.

12 13

F.O.R COST IN RS.

(3 X 7 )

14 END

COST IN RS.

(3 X 12 )

Total

Material Description & Qty. shall be as per supply price schedules

I/ We agree to supply the articles noted above at the rates herein tendered by me/ us subject to the condition of tender and supply of the Tender inquiry,

which I / We have carefully read and thoroughly understood.

I/ We hereby agree to keep this offer open for 180 days after the date of the opening of technical bid of tenders and shall be bound by communication of

acceptance dispatched within the prescribed time.

Bidder's Name : ____________________________

Signature : ____________________________ Name : ____________________________

Designation : ____________________________ Bidder's seal Date : ___________________________*


ANNEXURE – B -Bidding schedule for erection & commissioning prices

Name of Substation:---------------------- Amount in Rs.

• Material Description & Qty. shall be as per Erection price schedule.

I/ We agree to execute the articles noted above at the rates herein tendered by me/ us subject to the

condition of tender and execute of the Tender inquiry, which I / We have carefully read and thoroughly

understood.

I/ We hereby agree to keep this offer open for 180 days after the date of the opening of technical bid of

tenders and shall be bound by communication of acceptance dispatched within the prescribed time.

Bidder's Name: ____________________________

Signature: ____________________________

Name: ____________________________

Designation: ____________________________

Bidder's

Seal

Date : ___________________________

SR.

NO.

Descriptio

n

Unit

No./

wt.

Qty. Particulars

Erection/

Commissi

oning rate

per unit

Serv

ice

tax

Any

othe

r

Tax

Unit rate of

erection &

comm. charges

+ service

tax+Any other

tax

Total erection

&

commissioning

charges on end

cost basis (Qty.

x Unit rate

TOTAL


TENDER NO GETCO / Erection /220KV Sadla/27

Erection ,Supply of minor items/hardware materials, Testing and Commissioning of 220/132/66KV Substation Equipments provided by GETCO excluding Civil works and C & R Panels & SCADA at 220KV Sadla S/S.

Sr No Name of S/S Supply Erection Total in

Rs.

1 220kV Sadla S/S

TOTAL

(Figure in words : ______________________________________________________)

Bidder's Name : ____________________________

Signature : ____________________________

Name : ____________________________

Designation : ____________________________

Bidder's

Seal

Date : ___________________________


Tender No.: GETCO/ERECTION/220KV Sadla/27 Name of Work: Erection ,Supply of minor items/hardware materials, Testing and Commissioning of 220/132/66KV Substation Equipments provided by GETCO excluding Civil works and C & R Panels & SCADA at 220KV Sadla S/S.

BOQ for 220kV SADLA SUB-STATION(Erection Part with minor supply items)

BOQ for 220kV SARLA SUB-STATION

Sr. No.

Particulars of Item Unit Supply

Qty. Erection

Qty.

A Erection of 220kV Equipments as per respective technical specifications and relevant special conditions .

1

Surge Arrester 198kV, 10kA, Cl-3 with str and clamp connectors as per Technical spec No.

0 18

2

PT 220kV/√3-/110V/√3-3C with str and clamp connectors as per Technical spec No.

0 6

3BPI 8kN with str and clamp connectors as per Technical spec No. 0 207

4HBPI 8kN with str and clamp connectors as per Technical spec No. 0 36

5BPI clamp suitable for Twin Moose No. 243 0

5

HDB Isolator with one ES 1600A 40kA 3s with str and clamp connectors as per Technical spec Set.

0 6

6

HDB Isolator without ES 1600A 40kA 3s with str and clamp connectors as per Technical spec Set.

0 2

7

Tandem DB Isolator 1600A 40kA 3s with str and clamp connectors as per Technical spec Set.

0 23

8

CT conventional 1200-600-300/1, 4C with str and clamp connectors as per Technical spec No.

0 24

9

CB 2000A 40kA 3s with str and clamp connectors as per Technical spec Set.

0 8

B

Erection of 220kV Switchyard materials as per respective technical specifications and relevant special conditions suitable for two Main Bus with Twin ACSR Moose conductor and Transfer Bus with Twin ACSR Moose conductor scheme & relevant Flyover Bus with Twin ACSR Moose conductor.

1Gantry structures GI as per BOM, Steel & A/B part MT 0

2Gantry structures GI as per BOM, Bolt nut part MT 0 95.9

3

VHF Tower Mast Structure GI with stub, template complete as per BOM, Steel & A/B part MT

0

4

VHF Tower Mast structures GI with stub, template complete as per BOM, Bolt nut part MT

0

1.7


5

Stringing of bus with Twin Moose ACSR conductor for all the three phases with required insulators, hardwares & accessories, spacers provided at every 3.0 mtr. interval etc. complete as per relevant standards and approved drawings with Jumpers for continuous Bus Arrangement (It includes cost of insulators, hardwares & accessories, spacers etc.all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor).-Conductor Shall be Provided by GETCO. - Break up as per Annexure-6

a Main Bus with 36Mtr span including bus jumpers No. of Span 8 8

b Transfrer Bus with 36Mtr span including bus jumpers No. of Span 4 4

c Trasformer flyover bus with 74Mtr span No. of Bay 2 2

d Bus Coupler Flyover Bus with 74Mtr. Span No. of Bay 1 1

6

Stringing of Earth Wire with 7/3.15 GS wire with required hardwares & accessories etc. complete as per standards and approved drawings for span of 74 meters.(It includes cost of hardwares & accessories, etc. all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor).-Earthwire shall be provided by GETCO. - Break up as per Annexure-6

Span

7 7

7

Droppers (including required suspension string with hardware & accessories if any) & Jumpers (including Equipment to Equipment) with Twin Moose ACSR conductor as per standards and approved drawings with provision of required spacers( Suitable for 350mm spacing) at every 3.0 mtr. interval .(It includes cost of insulators, hardwares & accessories, Fire Wedge connectors, spacers etc.all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor)-Conductor Shall be provided by GETCO.- Break up as per Annexure-6

a 220/66KV Transformer Bay No. of bay 2 2

b 220KV Line Bay No. of bay 4 4

c 220KV Bus Coupler Bay No. of bay 1 1

d 220KV Transfer Bus Coupler Bay No. of bay 1 1

8

Droppers (including required suspension string with hardware & accessories if any) & Jumpers with Single Moose ACSR conductor as per standards and approved drawings (It includes cost of insulators, hardwares & accessories, Fire Wedge Connectors, etc.all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor)-Conductor shall be provided by GETCO.

a 220KV Line Bay - LA & CVT No. of bay 4 4

b 220/66KV Transformer Bay - LA No. of bay 2 2

c 220KV PT Bay No. of bay 2 2

C Supply and Erection of 66kV Equipments as per respective technical specifications and relevant special conditions suitable.

1 Power Transformer 66/11kV 5MVA with oil and accessories,connector suitable for Single Moose ACSR No.

0 1

2 Surge Arrester 60kV, 10KA, Class 3 with structure and clamp connectors suitable for Single Moose ACSR No.

0 30


3 PT 66kV/v3-/110V/v3-2C with structure and clamp connectors suitable for Single Moose ACSR No.

0 6

4 BPI 4kN with structure and clamp connectors suitable for Single Moose ACSR No.

0 64

5 BPI clamp suitable for Single Moose No. 64 0

6 BPI 4kN with structure and clamp connectors suitable for Twin Zebra ACSR No.

0 28

7 HBPI 4kN with structure and clamp connectors suitable for Twin Zebra No.

0 6

8 BPI clamp suitable for Twin Zebra No. 34 0

9 HDB Isolator with one ES 630A 25kA 3s with structure and clamp connectors suitable for Single Moose ACSR Set.

0 7

10 HDB Isolator without ES 630A 25kA 3s with structure and clamp connectors suitable for Single Moose ACSR Set.

0 17

11 HDB Isolator without ES 630A 25kA 3s with structure and clamp connectors suitable for Single Moose ACSR (3nos./set) & Twin Zebra ACSR (3nos./set) Set.

0 2

12 HDB Isolator without ES 1250A 25kA 3s with structure and clamp connectors suitable for Twin Zebra ACSR Set.

0 6

13 CT 600-300/1 3C, 31.5KA 3S with structure and clamp connectors suitable for Single Moose ACSR No.

0 21

14 CT 1200-600/1 3C 31.5KA 3S with structure and clamp connectors suitable for Twin Zebra ACSR No.

0 9

15 CT 100-50/1 3C 31.5KA 3S with structure and clamp connectors suitable for Single Moose ACSR No.

0 3

16 CB 1600A 25kA 3S with structure and clamp connectors suitable for Single Moose ACSR Set.

0 8

17 CB 1600A 25kA 3S with structure and clamp connectors suitable for Twin Zebra ACSR Set.

0 3

D

Supply and Erection of 66kV Switch Yard Material as per respective technical specifications and relevant special conditions suitable for two Main Bus with Twin ACSR Zebra conductor scheme & relevant Flyover Bus with Twin ACSR Zebra conductor.

1 Gantry structures GI as per BOM , Steel & A/B part MT 0

2 Gantry structures GI as per BOM , Bolt nut part MT 0 51.14

3 Stringing of bus for all the three phases with Twin Zebra ACSR conductor, insulators hardwares, spacers(suitable for 350mm spacing) at interval of 4.0 mtr complete as per relevant standards and approved drawings.(The scope includes the cost of insulators, hardwares, accessories, spacers etc.all items required for satisfactory operation. Any variation in quantities shall be absorbed by erection contractor).-Conductor Shall be provided by GETCO. - Break up as per Annexure-6

a Main Bus with 33.800 Mtr. Span including bus jumpers Span 2 2

b Main Bus with 30.900 Mtr. Span including bus jumpers Span 2 2

c Main Bus with 31.900 Mtr. Span including bus jumpers Span 2 2

d Main Bus with 34.900 Mtr. Span including bus jumpers Span 2 2

e Line flyover bus with 23.8 Mtr. Span No. of bay 7 7

f 66/11KV Trf. flyover bus with 23.8 Mtr. Span No. of bay 1 1

g Transformer flyover bus with 52.2 Mtr. Span No. of bay 2 2


h Transformer flyover bus with 15.8 Mtr. Span No. of bay 2 2

4 Stringing of Earth Wire with 7/3.15 GS wire with required hardwares & accessories etc. complete as per standards and approved drawings for the shown span. (It includes cost of hardwares & accessories etc. all items for satisfactory functioning. Any variation in quantities should be absorbed by erection contractor).- Earthwire shall be provided by GETCO.- Break up as per Annexure-6

a Main Bus with 33.800 Mtr. Span Span 2 2

b Main Bus with 34.900 Mtr. Span Span 2 2

c Main Bus with 31.900 Mtr. Span Span 2 2

d Other Requiements with Span

7.5 Mtr. Span Span 1 1









e Line flyover bus with 23.8 Mtr. Span No. of bay 9 9

f 66/11KV Trf. flyover bus with 23.8 Mtr. Span No. of bay 2 2

g Transformer flyover bus with 52.2 Mtr. Span No. of bay 4 4

5 Droppers (including required suspension string with hardware & accessories if any) & Jumpers with Single Moose ACSR conductor as per standards and approved drawings. (It includes cost of insulators, Fire wedge connectors,hardwares & accessories etc. all items required for satisfactory functioning. Any variation in quantities shall be absorbed by erection contractor).-Conductor shall be provided by GETCO.- Break up as per Annexure-6

a 220/66KV Transformer Bay - LA No. of bay 2 2

b 66KV PT Bay No. of bay 2 2

c 66KV Line Bay No. of bay 7 7

d 66/11KV Transformer Bay No. of bay 1 1

6 Droppers and Jumpering (equipment to equipment) with Twin Zebra ACSR conductor as per standards and approved drawings with provision of spacers suitable for 350mm spacing at 4.0 mtr interval. (The scope includes the cost of accessories ,spacers, fire wedge connectors etc.all items required for satisfactory operation.) -Conductor Shall be provided by GETCO.- Break up as per Annexure-6

a 220/66KV Transformer Bay (66KV side) No. of bay 2 2

b 66KV Bus Coupler Bay No. of bay 1 1

Remarks: Conductor & Earthwire for Stringing,wherever applicable, shall be provided by GETCO.Other Material are in scope of contractor.

E

Supply and Erection of General purpose equipments and materials as per respective technical specifications and relevant special conditions.


1

Suitable arrangement of 11KV connection from 5MVA 66/11kV transformer to distribution tr (11/0.415kV) with required 22kV CT, its junction box, support structure insulated conductor and DP structure with DO fuse, 22kV BPIs arrangement for proteciton of dist transformer and mounting arrangement of Dist box suitable to dist transformer. Package

LS LS

2AC unit 3 Ton Split for Control room (5 star rating and reputed make) No. 3 3

3AC unit 1.5 Ton Split for Office.(5 star rating and reputed make) No. 2 2

4AC unit 3 Ton Split for PLCC Room.(5 star rating and reputed make) No. 2 2

5

Erection of Distribution Transformer 500 kVA with Supply of Suitable Outdoor Dist. Box with DG changeover switch facility ready to switch on condition and its fixing -mounting arragement.(Supply includes Outdoor Dist. Box with DG changeover switch and Aluminium Gland Plate & its fixing , mounting arrangement.) Set

0 1

6Providing major spares as per Ann A attached herewith Set 1 0

7Providing instruments as per Ann B attached herewith Set 1 0

8Providing tools and tackles etc. as per Ann C attached herewith Set 1 0

9

Providing RO Water Filter System, Water Cooler, Furniture, etc. as per Ann D attached herewith Set

1 0

10

Supply and Erection of Fire stand with 4 buckets including concreting as per our drawing & Instruction of E. I. C. Set

1 1

11Providing of rubber Matting (size 3'x3'x20mm) in control room No. 72 0

12

Supply and installation of ISI marked fire extinguishers of various types required for 220 KV sub station.

1) Dry chemical powder type of 10 Kg. capacity. No. 2 0



4) Carbon dioxide ( CO2) gas type of capacity 6.5 Kg. capacity No. 2 0

5) Carbon dioxide (CO2) gas type of capacity 22.5 Kg. capacity No. 1 0

6) Mechanical Foam type of capacity 9 LT. No. 2 0

7) Mechanical Foam type of capacity 50 LT. No. 1 0

G

Supply and installation of materials/item for Power Cable and control Cable wiring as per approved wiring schedule.

1

Supply and Laying of 1.1 kV PVC armourd copper/Aluminum control cable in trench including binding/clamping of cable with GI wire or schedule as per requirement including supply and fixing of identification tags on both ends and at distance of every 100mtr.

1) 2c x 2.5 mm2, copper control cable Mtr. 2100 2100

2) 2c x 4 mm2, copper control cable Mtr. 0 0

3) 4cx2.5 mm2, copper control cable Mtr. 1800 1800

4) 4c x 4 mm2 copper control cable Mtr. 6800 6800




8) 19c x 2.5 mm2 copper control cable Mtr. 7500 7500

9) 27c x 2.5 mm2 copper control cable Mtr. 1200 1200

10) 1 x 50 mm2 copper cable for battery to charger and charger to DCDB connection Mtr.

500 500

10b)4C 10 mm2 copper control cable.for battery charger Mtr. 60 60


11) 3.5 x 10 mm2 Al. armoured LT cable Mtr. 450 450



14) 1 C 150 mm2 Al armoured LT Cable Mtr. 3000 3000

Termination of the control cable at panel / MK box/equipment including PVC binding dressing/shaping drilling of holes in panels for glands nuts for following size. The work also includes Looping in panel and MK box with using crimping type of lugs of suitable size with ferruling with proper size of copper cable wire. The loops should be bunched with using button tape and proper shaping etc.

1) from 2c upto 7 core of 2.5 & 4.0 sq.mm No. 425 425

2

2) above 7 cores control cable. No. 550 550

5 Laying of 1.1kv PVC/XLPE armored Al. LT power cable in ground by digging trench of suitable width and 450 mm depth with providing and fixing of brick and sand layer covering the cable in any type of soil and Laying of 1.1kv PVC armored copper control cable in heavy duty PVC pipe of suitable size buried in ground by digging trench of suitable width and 450 mm depth in any type of soil including supply and fixing of Pipe and identification tags at distance of every 100 Mtrs for following size

1) Up to 7 core and all LT cables Mtr. 150 150

2) above 7 core Mtr. 600 600

Fixing of 'B' type class GI pipes with necessary size of band and couplings for control cable protection of CT, PT/CVT. Isolator etc.equipments including fixing with structures as per instruction of Engineer-in-charge.

1) 220kV Switch Yard Mtr. 150 150

6

2) 66kV switch yard Mtr. 125 125

7Providing and fixing bay MK as per tech spec No. 5 5

8

Providing and fixing Yard LT ACDB as per tech spec -with 20 OG feeders No.

0 0

9

Providing and fixing Yard LT ACDB as per tech spec -with 12 OG feeders No.

2 2

10

Providing and fixing of all weather proof, cold rolled sheet steel junction box for CVT & PT, CT terminations with 30 Nos. of disconnecting type, 'Elmex' make CATDM 4 or equivalent type connectors and required no of fuses, links etc.as per instruction of Engineer-in-charge.

No.

14 14

F

Supply and installation of materials for Illumination system in all respect as per respective specifications and special conditions ( Sucessful bidder has to submit the complete design and BOQ for approval)

1

Providing & Fixing of Energy Efficient T5 type Indoor decorative luminaries in all the rooms of control room building complete (ref. Ann-4 Item (A)) as per technical spec Cl No. 2.10.4.8 (EEI type ) as per design with respect to required lux level and relevant tender drgs. with required industrial grade point wiring as per technical spec. Scope also includes providing and fixing of 15/5 A plug, Portable Emergency Light, Bell, Fan, Ex- Fan, DC Point, with requisite MCBs and DC 100W lamp , DC Plug etc all items as per Ann-4 Item (A) in following rooms

i Control Room Package LS LS


ii PLCC Room Package LS LS

iii Office Package LS LS

2

Providing & Fixing of Energy Efficient T5 Industrial type Indoor luminaries in all the rooms, passages of control room building complete (ref. Ann-4 item (A)) as per technical spec Cl No. 2.10.4.8 (EEI type) as per design with respect to required lux level and relevant tender drgs. with required industrial grade point wiring as per technical spec. Scope also includes providing and fixing of 15/5 A plug, Portable Emergency Light, Bell, Fan, Ex- Fan, DC Point, with requisite MCBs and DC 100W lamp,DC Plug etc all items as per Ann-4 Item (A) in following rooms, passages etc.

i Battery Room Package LS LS

ii LV Room Package LS LS

iii Store Room Package LS LS

iv Ramp Slope Package LS LS

v Veranda Package LS LS

vi Toilet Gents Package LS LS

vii WC Package LS LS

viii Toilet Ladies Package LS LS

ix Passage (Corridor) Package LS LS

x Water Room Package LS LS

3

Providing and fixing of flood light luminaries as per design for 220kV switch yard area with Philips/CGL/Bajaj/GE/Oshram make HPSV 150/250/400W lamp with energy efficient type choke (HF) with control gear box & ancillaries and suitable for mounting on structure at appropriate height ( as per design) as per specifications TS illuminations cl. no 2.10.4.8 with necessary GI fabrication & GI bolt nuts to fix control gear box at the structure with complete internal and external wiring to J. box ,Dist panel/section feeder pillar etc with supply of required 3 c x 2.5 mm2 copper armoured cable (as per spec ) .The scope includes supply and erection of all the materials required for satisfactory functioning of above work.

Package

LS LS

4

Providing and fixing of flood light luminaries as per design for 66kV switch yard area with Philips/CGL/Bajaj/GE/Oshram make HPSV 150/250W lamp with energy efficient type choke (HF) with control gear box & ancillaries and suitable for mounting on structure at appropriate height ( as per design) as per specifications TS illuminations cl. no 2.10.4.8 with necessary GI fabrication & GI bolt nuts to fix control gear box at the structure with complete internal and external wiring to J. box ,Dist panel/section feeder pillar etc with supply of required 3 c x 2.5 mm2 copper armoured cable (as per spec ) .The scope includes supply and erection of all the materials required for satisfactory functioning of above work.

Package

LS LS


5

Providing and installation of post top lantern for main gate and road from main gate to swichyard via control room as per design with Philips/CGL/Bajaj/GE/Oshram make and energy efficient type suitable wattage lamp with control gear box & ancillaries suitable for mounting on Gate pillars and 4.5 mtr poles with necessary GI fabrication & GI bolt nuts to fix control gear box with complete internal and external wiring to J.box,Dist panel/section feeder pillar, fixing terminal etc. with supply of required 3 c x 2.5 mm2 copper armoured cable as per spec .This also includes the supply and erection of required 4.5 mtr poles and its foundation work as per spec and earthing with main mesh. The scope includes supply and erection of all the materials required for satisfactory functioning of above work.

Package

LS LS

6

Providing and fixing of street light luminaries for reamaing area (like road, peripheral area etc.) of switch yard complete as per design with Philips/CGL/Bajaj/GE/Oshram make and energy efficient type 70 W (or suitable wattage )lamp with control gear box & ancillaries suitable for mounting on 7.0 mtr swaged poles as per spec.TS illuminations cl. no 2.10.4.8 (EEO2) at appropriate height with necessary GI fabrication & GI bolt nuts to fix control gear box with complete internal and external wiring to J. box ,dist panel/section feeder pillar, fixing terminal etc with supply of required 3 c x 2.5 mm2 copper armoured cable (as per spec). This also includes the supply and erection of 7.0 mtr swaged pole and foundation work as per spec. and panting with two coats of primer and two priming of zinc chromate as well as earthing with main mesh. The scope includes supply and erection of all the materials required for satisfactory functioning of above work.

Package

LS LS

7

Supply and Erection of main lighting Panel ACP-1 as per Specifications. Set comprises minimum 2 nos.of such panels qty may be more if required as per design.Scope also includes the providing and erection of 25x6 GI strip for earthing with main mesh

Set

1 1

8

Supply and Erection of main lighting Panel ACP-2 as per Specifications Set comprises minimum 4 nos.of such panels qty may be more if required as per design.Scope also includes the providing and erection of 25x6 GI strip for earthing with main mesh

Set

1 1

9


Set

1 1

10


Set

1 1

11

Supply and Erection of main Yard light Dist. Board as per designed capacity ratings.Scope also includes the providing and erection of 50x6 GI strip for earthing with main mesh Nos

2 2

12

Providing of concreting in 1:2:4 mix including muffing for erection of pole & Dist boxes panels including excavation of HR/SR as per approved drawing. Package

LS LS

13

Providing & fixing of ' B ' Class ISI marked GI pipe of 25 mm inner diameter for cable looping, road crossing with necessary elbow / band to J. Box etc. Package

LS LS


14

Providing and fixing of GI clamp (25mm wide GI strip with 6 mm GI nut bolts) on structure at approx. 1/2 Mtr. Interval for clamping of cable . Clamp should be fix in such a way that cable can be easily mount inside it & sustain standing on structure. This also includes required other materials ,accessories required for complete functioning of Illumination system of whole project (switch yard and all buildings, structures) those are not covered in this schedule for Illumination. Please refer the drawing "General Schematic for Illumination" in the TS Illumination.

Package

LS LS

Note: The qunatities of the ACP's mentioned in the schedule of requirement are based on std. requirement, which shall be finalised during detail engineering. The bidder has to assess the qty. of ACP's at the time of quoting the bid. The qty of ACP's finalised during detail engineering is binding to the bidder & no any extra payment shall be made. In all the case the decision of GETCO will be final.

G

Supply and installation of materials for Earthing system in all respect as per respective specifications and special conditions ( Sucessful bidder has to submit the complete design and BOQ for approval)

1

Supply and Installation of earthing strips/round bars as shown below including digging of 600 mm depth and 450 mm wide trench fixing on structure as per std equipment earthing phylosophy incuding fixing arrangement with two bolt arrangement, jointing, welding etc. complete.

a) 75 x 10 mm GI strip. RMt. 10800 10800

b) 50 x 6 mm GI strip. RMt. 8800 8800

c) 40 mm dia steel rod RMt. 23100 23100

d) 40mm dia 3mtr long steel rod Nos. 150 150

e) 7/3.15 Earth wire for earthing of Towers with peak RMt. 1500 1500

2

Providing and installing Check pit as per drawing and instruction of Engineer In charge with provision of earth chamber. Nos.

6 6

3

Installation of treated pipe electrode providing 100 mm inner diameter CI pipe of 13 mm thickness and 3000 mm length as per GETCO drg No P011. Work includes fabrication and fixing of GI strips for earthing connection Nos.

64 64

4

Providing BB masonary inspection chamber (man hole) incl.light type CI cover as per GETCO drawing no P011 Nos.

64 64

Note: Extra earth should be removed away from the site s/s premises or refilling earthing pits if required. All required materials for this job such as CI pipe, CI cover with frame, salt, cement, sand, charcoal/bentonite, gravel, bricks etc. to be supplied by the contractor.

H

Supply and Erection of Ladder Type Cable Trays and Accesories as per respective Technical Specifications and relevant special conditions.

Width of tray

450mm Rmtr. 950 950

350mm Rmtr. 320 320

Length: Standard length of tray is 2500mm, Height is 75mm, Thickness is 2mm (min.)

Note: Cross, Tees, Elbows, Coupler plates, Bends, Reducer etc. required for complete installation of Ladder Type Tray are included in the Scope.


I AC-DC Auxiliaries, Cable Laying, etc.

1Battery set - 220 V, 250Ah (2 V, 110 cells) Plante´ type Lead Acid Battery Set with FRP stand of adequate size No.

0 2

2

Battery Charger - 220 V (Float - 30A / Boost - 50A) - (SCADA compatible)

No.

0 2

4DCDB-220 V with 20 Feeder No. 4 4

5LTPB - (SCADA compatible) No. 0 2

J Supply and installation of materials/item for Power Cable and control Cable wiring as per approved wiring schedule.

1

Supply and Laying of 1.1 kV PVC armoured copper/Aluminum control / LT power cable in trench including binding/clamping of cable with GI wire as per requirement including supply and fixing of identification tags on both ends and at distance of every 100mtr.(Note :- Aluminum cables of size 185 mm

2 & above shall be XLPE

type)


2) 2c x 4 mm2 , copper control cable Mtr. 0 0


4) 4c x 4 mm2 , copper control cable Mtr. 0 0




8) 19c x 2.5 mm2 , copper control cable Mtr. 1200 1200

9) 27c x 2.5 mm2 , copper control cable Mtr. 0 0

10A) 1 x 50 mm

2 , copper cable

Mtr. 1750 1750

10B) 4C x 10 mm2 , copper control cable Mtr. 100 100

11) 4 x 10 mm2 , Al. armoured LT cable Mtr. 400 400

12) 3.5 x 25 mm2 , Al. armoured LT cable Mtr. 1100 1100



15) 1C x 150 mm2 , Al. armoured LT cable Mtr. 2500 2500




Termination of the control cable at panel / MK box/equipment including PVC binding, dressing/shaping, drilling of holes in panels for glands nuts for following size. The work also includes Looping in panel and MK box with using crimping type of lugs of suitable size with ferruling with proper size of copper cable wire. The loops should be bunched with using button tape and proper shaping etc.

1) cables from 2 core to 7 core of 2.5 & 4.0 Sq.mm size

No. 225 0

2

2) cables above 7 core

No. 350 0


Laying of 1.1kv PVC/XLPE armored Al. LT power cable in ground by digging trench of suitable width and 450 mm depth with providing and fixing of brick and sand layer covering the cable in any type of soil and Laying of 1.1kv PVC armored copper control cable in heavy duty PVC pipe of suitable size buried in ground by digging trench of suitable width and 450 mm depth in any type of soil including supply and fixing of Pipe and identification tags at distance of every 100 Mtrs for following size

1) Control Cables upto 7 core Mtr. 0 1000

3

2) Control Cables above 7 core and all LT cables Mtr. 0 550

Providing and fixing of 50mm dia 'B' class GI pipes with necessary size of band and couplings for control cable protection of CT, PT/CVT etc. equipments including fixing with structures as per instruction of Engineer-in-charge.

1) 220 kV Switch Yard Mtr. 175 175

4

2) 66 kV switch yard Mtr. 125 125

Providing and fixing of 100mm dia 'B' class GI pipes with necessary size of band and couplings for control cable protection of CB, Isolator etc.equipments including fixing with structures as per instruction of Engineer-in-charge.

1) 220 kV Switch Yard Mtr. 225 225

4a

2) 66 kV switch yard Mtr. 75 75

5Providing and fixing bay MK as per tech spec No. 8 8

6Providing and fixing Yard LT ACDB as per tech spec -with 20 OG feeders No.

1 1

7Providing and fixing Yard LT ACDB as per tech spec -with 12 OG feeders No.

2 2

8

Providing and fixing of all weather proof, cold rolled sheet steel junction box for CVT & PT, CT terminations with 30 Nos. of disconnecting type, 'Elmex' make CATDM 4 or equivalent type connectors and required no of fuses, links etc.as per instruction of Engineer-in-charge.

No. 14 14

KErection of PLCC Equipments

1 220kV ,4400PF CVT (having two windings with VA burden 50 & 50 and

having accuracy of 3P & 0.2 class for protection & metering core

respectively) with clamp/connectors & supporting structure. The

interconnection from HF terminal of CVT to PLCC coupling device shall be

made using 16 Sq.mm PVC insulated stranded (non flexible strands) copper

cable.

No.

Nil 2

2 50 Volt, 350AH capacity, storage Low Maintenance , High performance

Lead acid Battery set with accessories & FRP stand set (25

cells/set) Nil 1

3 SCADA Compatible Float & boost charger suitable for 50Volt, 350AH

capacity battery with float 0/p volt : 50 to 58 volt, 40 Amp, Boost 0/p : 50 to

72V, 35 Amp with Variac & Servo Motor mechanism for Auto Operation

for DC O/P Voltage Adjustment of Float Charger as per technical

specification.

No.

Nil 1

4 DCDB with 10 Nos. of Feeders (6 Amp each) for DC supply to PLCC

panels & Exchange as per technical Specification. No.

Nil 1

5 PLCC Exchange No. Nil 1

6 DAS Meters network wiring complete up to RS 485 to RS 232 Convertor of

DAS PC using


a) 3 core communication cable (as per specification given hereunder)

(Laying includes complete for Data Acquition from Panel to DAS Computer

including installation of RS 485 to Rs232 converter)

Mtr.

100 80

b) RS 485 to RS 232 Converter (as per specification given hereunder) No. 1 0

7 Desktop PC with A4 size B & W Laser Printer and Monitor for DAS No. 1 0

NOTE:

Supply & Erection of 220/66KV Transformer is not in the scope of awardee, but awardee will erect the items other than the scope of transformer manufacturer and witness during the erection and testing of the same and provide all the result in as built drawings/documents.

Annexure - 4

Building Detail

Sr. No.

Location

Area X x Y Mtr.

Ht. in Mtr.

Avg Illumination level

Required in LUX

AC 1.5 T Split

AC 3 T Spli

t

15 A Plug

5 A Plug

Fan

Ex Fan

DC Point

DC Plug

Portable

Emergency Lighti

ng

Bell

3 ph.with neutral 15A test plug

A Control Room

1 Control Room 8.8x8.5 4 300 0 3 4 3 2 0 2 1 1 1 1

2 Battery Room 8.8x8.5 4 100 0 0 0 3 2 4 1 0 0 0 0

3 LV Room 8.8x8.5 4 150 0 0 2 2 2 0 1 0 1 0 1

4 PLCC Room 9.8x5.5 4 300 0 2 2 2 2 0 1 0 1 1 0

5 Store Room 5.8x5.5 4 100 0 0 2 2 1 0 0 0 0 0 0


6 Ramp Slope 2x3.6 4 100 0 0 1 1 0 0 0 0 0 0 0

7 Veranda 2.0x17.9 2.5 70 0 0 0 2 0 0 0 0 0 0 0

8 Office 6.8x8.5 4 300 0 2 2 2 1 0 0 0 0 2 0

9 Toilet Gens 2.2x1.5 4 70 0 0 0 1 0 1 0 0 0 0 0

10 WC 1.5x0.9 4 70 0 0 0 1 0 1 0 0 0 0 0

11 Toilet Ladies 2.5x1.7 4 70 0 0 0 1 0 1 0 0 0 0 0

12 Passage (Corridor) 15.8x2.8 4 70 0 0 0 2 0 0 0 0 1 0 0

13 Ramp Slope 3.6x2 4 100 0 0 1 1 0 0 0 0 0 0 0

14 Veranda 6.2x2.1 2.5 70 0 0 0 2 0 0 0 0 0 0 0

NOTE: Control room out skirt area/porch shall be provided with suitable water tight bulk head fittings as per design.

Annexure - 5

Details of Illumniation for Switch yard Sr. No.

Location Details

1 200kV switch Yard

Upper Bus height 18.5 Mtr

Lower Bus height 12.5 Mtr

Equipments Height from Ground 5.5 Mtr+0.3 Mtr plinth

Lux level Required for main Equipments - 5.5 Mtr Height 50

Lux level rquired for Other area 20

2 66kV switch Yard

Upper Bus height 10 Mtr

Lower Bus height 7 Mtr

Equipments Height from Ground 4.0 Mtr+0.3 Mtr plinth

Lux level Required for main Equipments - 4 Mtr Height 50

Lux level rquired for Other area 20

Lux level required for follwing amminities

3 Car Parking Area 20

4 Main Roads (Post Top Lantern) 20

5 Sub Road (Street Light) 20

6 Fencing Light and Spare Area (Street Light) 20

7 Oil Filtration shed 70

8 Garden of Transit Camp (Post Top Lantern) 20

Note:

The area if not applicable as per layout of the project may please be ignored.


Annexure-6

Stringing Breakup for 220KV Sadla S/S Note: No price to be quoted for items mentioned. It is for the breakup of items required for the main work mentioned against each item.

Engineering BOQ Breakup for 220kV Sarla Sub-Station

Sr.No. Particulars of Item Unit Supply Qty

B

Supply and erection of 220kV Swithyard materials (as per respective technical specifications and relevant special conditions) suitable for Two Main Bus & Transfer Bus with Twin ACSR Moose conductor & relevant Flyover Bus with Twin ACSR Moose conductor.

Stringing of bus with Twin Moose ACSR conductor for all the three phases with required insulators, hardwares & accessories, spacers provided at every 3.0 mtr. interval etc. complete as per relevant standards and approved drawings with Jumpers for continuous Bus Arrangement (It includes cost of insulators, hardwares & accessories, spacers etc. all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor)-Qty. per span of 3phase-Conductor shall be provided by GETCO.

5a Main Bus with 36Mtr span including bus jumpers No. of Span 8

Insulators-120KN AF Per Span No. 192

Double Tension H/W & Acc with Turn Buckle.-Twin Moose ACSR Per Span

No. 3

Double Tension H/W & Acc without Turn Buckle.-Twin Moose ACSR Per Span

No. 3

Spacers suitable for Twin Moose ACSR (350mm Spacing) in Main Bus Per Span

No. 27

Spacers suitable for Twin Moose ACSR (350mm Spacing) in Main Bus Jumpers (Total)

No. 72

5b Transfer Bus with 36Mtr span including bus jumpers

No. of Span 4



No. 3


No. 3

Spacers suitable for Twin Moose ACSR (350mm Spacing) Per Span

No. 27

Spacers suitable for Twin Moose ACSR (350mm Spacing) in Main Bus Jumpers (Total)

No. 36


5c Transformer flyover bus with 74 Mtr span No. of Bay 2



No. 3


No. 3

Spacers suitable for Twin Moose ACSR (350mm Spacing) Per Span

No. 66

5d Bus Coupler Flyover Bus with 74 Mtr. Span No. of Bay 1



No. 3


No. 3

Spacers suitable for Twin Moose cond.(350mm Spacing) Per Span

No. 66

6

Stringing of Earth Wire with 7/3.15 GS wire with required hardwares & accessories etc. complete as per standards and approved drawings for span of 74 meters.(It includes cost of hardwares & accessories etc. all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor)-Earthwire shall be provided by GETCO. Span

7

Earthwire Access.- Suitable for 7/3.15 GS per span No. 2

7

Droppers (including required suspension string with hardware & accessories if any) & Jumpers (including Equipment to Equipment) with Twin Moose ACSR conductor as per standards and approved drawings with provision of required spacers (Suitable for 350mm spacing) at every 3.0 mtr. interval (It includes cost of insulators, hardwares & accessories, Fire Wedge connectors, spacers etc.all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor)-Qty. per bay of 3phase-Conductor shall be provided by GETCO.

a 220/66KV Transformer Bay (220KV Side) No. of bay 2

Insulators-120KN AF Per Bay No. 90

Single Suspension H/W & Acc.-Twin Moose ACSR Per Bay

No. 6

Spacers suitable for Twin Moose ACSR (350mm Spacing) Per Bay

No. 89

Fire Wedge Connectors suitable for Moose ACSR to Moose ACSR Per bay

No. 18

b 220KV Line Bay No. of bay 4



No. 3



No. 65


No. 18

Fire Wedge Connectors suitable for Zebra ACSR to Moose ACSR Per bay

No. 6

c 220KV Bus Coupler Bay No. of bay 1



No. 3


No. 52


No. 18

d 220KV Transfer Bus Coupler Bay No. of bay 1


No. 55


No. 18

8

Droppers (including required suspension string with hardware & accessories, if any) & Jumpers with Single Moose ACSR conductor as per standards and approved drawings (It includes cost of insulators, hardwares & accessories, Fire Wedge Connectors, etc.all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor)-Qty. per bay of 3phase-Conductor shall be provided by GETCO.

a 220kV Line Bay-LA & CVT No. of Bays 4


No. 5

b 220/66KV Transformer Bay (220KV Side) - LA No. of Bays 2


No. 9

c 220KV PT Bay No. of Bays 2


Single Suspension H/W & Acc.-Single Moose ACSR Per Bay

No. 3

D

Supply and Erection of 66kV Switch Yard Material as per respective technical specifications and relevant special conditions suitable for Single Bus with Twin Zebra ACSR Conductor


3

Stringing of bus for all the three phases with Twin Zebra ACSR conductor, insulators hardwares, spacers(suitable for 350mm spacing) at interval of 4.0 mtr complete as per relevant standards and approved drawings.The scope includes the cost of insulators, hardwares, accessories, spacers etc.all items required for satisfactory operation. Any variation in quantities shall be absorbed by erection contractor)-Qty. per span/bay of 3phase- Conductor shall be provided by GETCO.

a Main Bus with 33.800 Mtr. Span including bus jumpers Span

2


Double Tension H/W & Acc. With Turn Buckle suitable for Twin Zebra ACSR cond. & 90KN Insulator disc Per Span

No. 3

Double Tension H/W & Acc. Without Turn Buckle suitable for Twin Zebra ACSR cond. & 90KN Insulator disc Per Span

No. 3

Spacers suitable for Twin Zebra ACSR (350mm Spacing) Per Span

No. 21

b Main Bus with 30.900 Mtr. Span including bus jumpers Span

2



No. 3


No. 3


No. 18

c Main Bus with 31.900 Mtr. Span including bus jumpers Span

2



No. 3


No. 3


No. 18

d Main Bus with 34.900 Mtr. Span including bus jumpers Span

2



No. 3



No. 3


No. 21

e Line flyover bus with 23.8 Mtr. Span Span 7



No. 3


No. 3


No. 12

f 66/11KV Trf. flyover bus with 23.8 Mtr. Span Span 1



No. 3


No. 3


No. 12

g 220/66KV Transformer flyover bus with 52.2 Mtr. Span (66KV side) No. of bay

2



No. 3


No. 3


No. 33

h 220/66KV Transformer flyover bus with 15.8 Mtr. Span (66KV side) No. of bay

2



No. 3


No. 3


No. 6


4

Stringing of Earth Wire with 7/3.15 GS wire with required hardwares & accessories (including spike reqd, if any) etc. complete as per standards and approved drawings for the shown span. (It includes cost of hardwares & accessories etc. all items for satisfactory functioning. Any variation in quantities should be absorbed by erection contractor).-Earthwire shall be provided by GETCO.

a Main Bus with 33.800 Mtr. Span Span 0


b Main Bus with 34.900 Mtr. Span Span 0


c Main Bus with 31.900 Mtr. Span Span 0


d Other Requiements with

7.5 Mtr. Span Span 0
















9 Mtr. Span Span 0


e Line bay with 23.8 Mtr. Span No. of bay 0


f 66/11KV Trf. flyover bus with 23.8 Mtr. Span No. of bay 0


g 220/66KV Transformer flyover bus with 52.2 Mtr. Span (66KV side) No. of bay

0


5

Droppers (including required suspension string with hardware & accessories if any) & Jumpers with Single Moose ACSR conductor as per standards and approved drawings. (It includes cost of insulators, hardwares & accessories etc. all items required for satisfactory functioning. Any variation in quantities shall be absorbed by erection contractor).-Qty. per bay of 3phase- Conductor shall be provided by GETCO.

a 220/66KV Transformer Bay (66KV Side) - LA No. of bay 2


No. 6



No. 3

b 66KV PT Bay No. of bay 2

c 66KV Line Bay No. of bay 7


Single Suspension H/W & Acc. Suitable for Single Moose ACSR & 90KN Insulator disc- Per Bay

No. 6


No. 18


No. 12

Fire Wedge Connectors suitable for Panther/Dog ACSR to Moose ACSR Per bay

No. 3

d 66/11KV Transformer Bay No. of bay 1


Single Suspension H/W & Acc. Suitable for Single Moose ACSR Cond. & 90KN Insulator disc- Per Bay

No. 3


No. 18


No. 12

6

Droppers (including required suspension string with hardware & accessories if any) and Jumpering (equipment to equipment) with Twin Zebra ACSR conductor as per standards and approved drawings with provision of spacers suitable for 350mm spacing at 4.0 mtr interval. The scope includes the cost of accessories ,spacers, fire wedge connectors etc.all items required for satisfactory operation. Any variation in quantities shall be absorbed by erection contractor -Qty. per bay of 3phase-Conductor shall be provided by GETCO.

a 220/66KV Transformer Bay (66KV Side) No. of bay 2


Single Suspension H/W & Acc.suitable for Twin Zebra ACSR Cond. And 90KN Insulator disc- Per Bay

No. 6

Spacers suitable for Twin Zebra ACSR (350mm Spacing) Per Bay

No. 26

Fire Wedge Connectors suitable for Zebra ACSR to Zebra ACSR Per bay

No. 30

b 66KV Bus Coupler Bay No. of bay 1

Spacers suitable for Twin Zebra ACSR (350mm Spacing) Per Bay

No. 6

Fire Wedge Connectors suitable for Zebra ACSR to Zebra ACSR Per bay

No. 24

Remarks: Conductor & Earthwire for Stringing, wherever applicable, shall be provided by GETCO.Other Material are in scope of


contractor.

: A N N E X U R E - "A" :

Supply of Major spares and devices

Sr. No.

Particulars Quantity

(A) DG set ( portable three pahse 415V 10 KVA Honda make) 1 set

(B) Welding M/C: Input volt.230-440V(single/two phase), 50Hz, Insulation class A 200 Amp. 1 set

: A N N E X U R E - "B" :

Supply of Instruments

Sr. No.


1 Computer set with UPS dust cover etc as per technical specifications ( for officer in charge) 1 set

2 A-4 size mono lasor printer as per technical specifications.( for officer In charge) 1 set

3 Earth Resistance Tester Digital GE-OHM C make (made in Germany) model no EN 61557/VDE 0413 or updated version with better features.

1 No

4 Clip on meter AC/DC V/I/OHM - 0-1000V, 0-25A Meco/Rishabh/Motwane Battery backup

1 No

5 Motor and manual Operated Oil BDV testing Kit –Motwanemake with 0-100kV range, auto cut off feature, with standard ball -cup and measuring gauge as per IS.

1 No

6 Thermo vision Camera with Notebook PC 1 set

A N N E X U R E - "C"

Supply of Tools & Tackles

Sr. No.


1 Earthing Rod (Highly insulated FRP telescopic Earthing/ Discharge Rod. Suitable for 220KV, 18 ft, 3 sections) with cable.

9


2 Spanner [Ring, Fixed, Box] Fix=10x11,12x13,14x15,,16x17Ring=10x11,12x13,14x15,16x17 Tubular=12x13,14x15,16x17,18x19 Screw driver=827I,927 Nut driver= 7mm

3

3 Steel Roller - Size 1" 10

4 Aluminium Roller - Size 4" 5

5 one/two/three Wheel pulley - Size 1" 2

6 Winch Machine with Handle - 05 Ton Capacity 2

7 Hydraulic Press Machine - - 80 Kgs 2

8 Hand drill Wolf or Equi. Make 1 240 V, hole capacity Capacity :- Hole up to 31 mm , Single Phase

1

9 Drill Machine - 5/8" Dia Standing Drill machine having 3 Feet Pillar & suitable for making Holes up to ¾”. Motor - Lubi or equi, 1-Ph, 1-HP. Drill Chuck, Arbour, V Belt & Switch

2

10 Chain pulley block - 5 tonne capacity 2

11 Wire rope pully block - 02 Tonne 1

12 Tent- Standard quality water proof Tent made from H.DP.E. Materials with 5 Nos of bamboos Rods and having capacity of 8 to 10 Person to stay & size 10 Ft x 10Ft Multipurpose

1

13 Water pump Set - 5 HP 2

14 Water pump Set - 1 HP 2

15 Crowbar - 1.5 Mtr 1

16 Crowbar - 1.0 Mtr 1

17 Heavy hammer - 10Kg 1

18 Pickaxe ( Trikam) - 2 '' width with Handle 5

19 Pawda[shovel] - 12 '' width with Handle 5

20 Axe (Kuhadi) with Handle 5

21 Sythe (Dharia) with Handle 10

22 Tar Poline (Tad Patri) size 5

23 Nylon Rope - 0.5" Dia -100 mtrs 1 Bundle

24 Nylon Rope 0.75" Dia - 100 mtrs 1 Bundle

25 Nylon Rope - 1" Dia - 100 mtrs 1 Bundle

26 Aluminium Ladder - 15 ft. Aluminium folding factory ladder (Heavy duty) made from high tensile aluminium alloy design no 152 AFFL 15 Ft height (4.56 mtrs) specification section= 15/8” X 1.1/4” Steps= 15/8 X 1.1/4 12”Center to Center

2

27 Telescopic aluminium ladder(3 sections) with platform - 25 ft 1


28 Oil Drum Lifter Oil Hand pump 1

29 Cable Drum Lifter 1

30 Cable Drum 1

31 Turn Table - Cable Drum 1

32 Hand cart - 2 tonne capacity With steel body 1

33 Hot air blower Small Capacity =1.5m3/min, Big Capacity =2.0m3/min

1

34 Vacumme cleaner - Tornedo/Ureka Forbes or equi. 1

35 Wooden sleeper - Pine wood sleeper of size 10”X5”X10 feet long

50

SAFETY TOOLS

1 Safety belt Full body covering and Half body covering 15

2 Halmet with ISI mark of repute make 10

3 Hand Gloves Hand gloves of quality as per Is certification 4770 & test potential 7500Volt 6

4 Gum boot (Pair) - Size 8,9,10. - Standard make 3

220 & 66 KV Breaker

1 One Set of Gasket for One pole of each type of Breaker 1

Switch Yard / Line Clamp connectors (SPARE)

1 T-clamp, for twin as well as single moose 10

2 Spacer cum Damper- 220KV 10

3 Clamps for each type of breaker 6

4 CT Clamp - 220 & 66KV 6

5 Joint sleeve- Alu. Moose conductor 10

6 Deadend hardware for moose conductor 3

7 Isolator clamp for 220KV 6

8 Isolator L-clamp- for 220KV 6

9 Palm connector- 220KV 6

10 X'mer bushing clamp (HV/LV/Neutral) 2

11 Repair Sleeve- moose 5

12 PG clamp for moose conductor 5

13 Isolator contacts for each type / make of isolator 6

14 PI Clamp-twin Morle 3

15 Earth wire clamp 4

16 Comealong clamp- moose conductor 3

Hardware - fastners

1 16/17, 03" Bolt nut 50

2 18/19, 04" Bolt nut 50

3 18/19, 03 " Bolt nut 50

4 21/23, 2.5" Bolt nut 50


5 21/23, 3" Bolt nut 50

Illumination Luminaries

1 Energy efficient decorativeTube (spare as provided in cotrol room illumination design) 20

Energy Efficient tube (spare as provided in switch yard illumination design)

20

2 CFL (spare as provided in illumination design) 20

3 LED indicating Lamps 22.5 20

Display Boards and others

1

Single line diagram drawn with radim paint suitable decorated on a board of approx size of 120x90 mmsuitable designed thickness with fixing arrangement in control room wall. 1

2

Key board with hook for differeint keys of each equipments/panels/cubicles with SLD drawn with color approx size 2'x2'

1

Annexure- "D"

Supply of Furniture, RO Water Filter System, Water Cooler Etc.

Sr. No.


Furniture for 220KV S/S

a) Steel chair "S" type, Overhanging arm with cushion with cane seat/back 1"X 16" gauge round pipe frame

3 Nos.

b) Steel rack of size 30"X36"X15" with three partitions, prepared 20 gauges

2 Nos.

c) Providing Control Room Table modular 5X5 Panta work surface with pedestal CPU Trolley & Key Board tray of Godrej or equivalent

1 No.

d) Office table with SDU & pedestal 5026/3619 Godrej or equivalent +B124

2 Nos.

d) Modular workstations of Godrej make or equivalent 4X2 Panta work surface with pedestal CPU trolley & keyboard Tray or equivalent

2 No.

e) Revolving chair PCH 7001R of Godrej make or equivalent 4 Nos.

1

f) Three seater perforated chair with powder coating(Bench) 1 No.

2 RO water filter system 25Ltr. Capacity 1 No.


3

Providing & installing SHRIRAM USHA or equivalent make water cooler of 40Ltr./hr. capacity suitable to operate on 230V+10% , 50Hz. Single phase AC supply with hermetically sealed type suction cooled compressor with overload protection confirming to IS 10617(Part-I) with amdt. 1 & 2. Item rate includes all charges including necessary piping of approved make & quality upto designated water supply point.

1 No.

Annexure-7

Specification: 3 core Shielded communication cables with twisted pair

(a) 20 AWG standard tined copper

(b) Capacitor of cables < 70 PF/M

(c) Size of conductor 7/0.30

(d) Voltage grade 600V

(e) Polyethylene insulator having characteristic impedance 120 OHM

Specification: Converter Module : RS 485 to RS 232 converter

Specification: The ADAM RS 485 to RS 232 converter Shall be powered with any unregulated

power source between +10 to + 30 VDC.

Their industrial grade plastic shells shall be mounted on a DIN rail, panel or in a piggybacked stack.

Shall require to have following Features:

• Automatic internal RS-485 bus supervision

• No external flow control signals required for RS-485

• Minimum 3000Vdc isolation protection

• Transient suppression on RS-485 data lines

• Baud rate up to 115.2 Kbps

• Networking up to 4000 feet.

• Reserved space for termination resistors

• Power and data flow indicator for troubleshooting

• Power requirement : +10 to +30 Vdc


• Mounts easily on DIN-rail or Panel

Specifications:

• Power requirements

Unregulated +10 to +30 Vdc with protection from power reversals

• CASE: ABS with captive mounting hardware.

• Accessories ( To be supplied) :

NYLON DIN-rail mounting Adapter

SECC Panel Mounting Bracket

• Plug-In screw terminal wiring :

Accepts AWG 1-#12 to #22 (0.5 to 2.5 mm) wires

• Baud rate (bps):

1200,2400,4800,9600,19.2K,38.4K, 57.6K, 115.2K, RTS control

• Isolation Voltage:

3000Vdc

• RS-232 Interface connector: Female DB-9

• RS-485 interface connector : Plug-in screw terminal

• Power consumption: 1.2 W maximum

Operating environment:

• Operating temperature:

-10 to 70 degree C ( 14 to 158 degree F)

• Storage temperature:

-25 to 85 degree C ( -13 to 185 degree F)

• Humidity : 5 to 95%, non-condensing

part – iii price bid office/01022011... · end cost in rs. (3 x 12 ) total ... 5bpi clamp...

Documents