parking improvements: highway g & south trail569578ea-93e6-481f-b733... · parking...
TRANSCRIPT
Beach Park & Highway G Improvement Project 7June 2015
Parking Improvements: Highway G & South Trail Plan View
30’ 60’15’0’
N
EQ. EQ. EQ. EQ. EQ. EQ.
60’
32
32.6
2.5%
29.6
29~55’
22’
Wooden Guard RailSee Detail on Sheet C500
Existing Stop Line
Improved Parking Area; Coordinate paver type with Village of Egg Harbor. The Village will supply paving unit. Contractor is to coordinate pick-up with the Village.
Work point to be field verified & approved by owner
Limit of work includes cutting into existing grade in the specified area abutting the existing pavement on South Trail
SOUTH TRAIL
COUNTY HIGHWAY G
BEACH PARK
EXISTING BIRDING TRAIL
ALPINE ROAD
HIGHWAY G
HILLSIDE ROAD
AA’
Beach Park & Highway G Improvement Project 8June 2015
Section A-A’
Parking Improvements: Highway G & South Trail
Existing Pavement 22’
1’ 1’
Guard Rail, See Detail on Sheet C500
Limit of Work
Concrete Curb
Pervious Pavers
Front of guard rail flush with edge of proposed pavement
Highway 42 & Highway G Improvement Project 9June 2015
Birding Trail Lighting Improvements
Trail Lighting: North
Trail Lighting: South
EQ. EQ.
30’ 60’15’0’
N
(2) Trail entry lights to be field located & approved by owner; See detail on Page 10
Fixtures nearest the existing birding platform should be equidistant from the platform
(52) fixtures (not including 2 at entry) cast into concrete sonotubes (See detail Page 10) at typical 30’ O.C. along the edge of the existing trail on the ravine side. Placement to be field verified and authorized by owner’s representative.
2 fixtures at entry+ 52 fixtures along trail
54 total fixtures
To Downtown
COUNTY HIGHWAY G
~741’Length of lighting center line from entry light to matchline
Length of lighting center line from
matchline to edge of platformLength of lighting center line from edge of platform to end of path
~386’~413’
COUNTY HIGHWAY G
BEACH PARK
MATC
HLIN
E
MATC
HLIN
E
IK10IP68
Ingrade LS553LED Via
LS553LED-xxx-xx-x-21-xx½" NPT adapter. Luminaire provided with
6.5 ft (2.0 m) hook-up wire.
Ø 3.5” (90 mm)
3.1”
(78
mm
)0.
5” (1
3 m
m)
LS553LED-xxx-xx-x-23-3-xxIncludes pre-installation blockout with a ½" NPT adapter. Luminaire provided
with 1' (0.3 m) hook-up wire.
Ø 3.7” (94 mm)
11.0
” (28
0 m
m)
0.5”
(13
mm
)
LS553LED-xxx-xx-x-23-4-xxIncludes pre-installation blockout
with 2 x ½" NPT adapters. Luminaire provided with 1' (0.3 m) hook-up wire.
Ø 3.7” (94 mm)
11.0
” (28
0 m
m)
0.5”
(13
mm
)
Specifications
Lamp Source 1 W LED□ White (4 300 K typical)■ Warm white (3 000 K typical)■ Blue (470 nm)Other colors by request
Approved Use Suitable for wet locationsSuitable for use in poured concreteInherently protected Type IC
Control Options 0-10 V (current sourcing)PWMOn-site or factory programmable brightness
IP Rating IP68
Construction 316 marine grade stainless steel
Installation Types Pre-Installation BlockoutConcrete pour, drive-over etc. Direct BurialLandscapes, planters etc.
Drive-over With 8-aperture version and pre-installation blockout
Static Load Rating One aperture - 2 200 lb (1 000 kg)Two aperture - 2 200 lb (1 000 kg)Four aperture - 3 300 lb (1 500 kg)Eight aperture - 4 400 lb (2 000 kg)Ratings are with pre-installation blockout only
Impact Rating IK10 for 8 aperture model
Standard Inclusions MicroAntiLeach™ wire entry
Remote Transformers / Power SuppliesOrder separately
Refer to Technical Data sectionfor application specific options
Ambient Operating Temperature
-4 °F to 122 °F (-20 °C to +50 °C)
Surface Temperature ≤113 °F (45 °C)
Photometrics Refer to www.lumascape.com
Any luminaire can become hot - take care with appropriate use and placement
The LS553LED is a rugged, side emitting marker light constructed of 316 marine grade stainless steel. This luminaire is ideal for pathways, pedestrian malls and other public spaces. Some models are also suitable for use in low speed traffic areas. The construction and technology used in this luminaire ensures a long service life.
OPTIONAL
LS553LED Via
1300 Industrial Road, Unit #19San Carlos, CA 94070FREE CALL 1-866-695-5862 US & [email protected]
www.lumascape.com C1107US 6 Sep 2013
0.5”
(13
mm
)
Ø3.5” (90 mm)
One aperture (1 x 120º)
Ø3.5” (90 mm)
0.5”
(13
mm
)
Four aperture (4 x 85º)
1( 5”.0
Ø3.5” (90 mm)
3 m
m)
Eight aperture(1) (8 x 40º)
0.5”
(13
mm
)
Ø3.5” (90 mm)
Two aperture (2 x 120º)
IngradeLS553LED Via
(1) Drive over is only available in stainless steel 8 aperture with pre-installation blockout
Dimmable Wiring Diagram Reference
Input Voltage LED Color Control Type Wiring Diagram
13-DIM Single Color PWM 2,3,4
LS553LED Pre-Installation Blockout Version
LS553LED Direct Burial Version
LAMPDescription Wattage Color Code
LED 1 W White(4 300 K typ.) 1W4
Warm white (3 000 K typ.) 1H6
Blue(470 nm) 1B4
LAMPDescription Wattage Color Code
LED 1 W White(4 300 K typ.) 1W4
Warm white (3 000 K typ.) 1H6
Blue(470 nm) 1B4
APERTURESDescription Code
One 1Two 2Four 4Eight 8(1)
(1) Drive-over with eight aperture version only.
APERTURESDescription Code
One 1Two 2Four 4Eight 8
CONDUIT CONNECTIONDescription Code
½" NPT adapter c/w 1' (0.3 m) hook-up wire 23-3
2 x ½" NPT adapter c/w 1' (0.3 m) hook-up wire 23-4
LS553LED
LS553LED
CONDUIT CONNECTIONDescription Code
½" NPT adapter c/w6.5' (2.0 m) hook-up wire 21
21
INPUT VOLTAGEDescription Code
120-277 V, 50/60 Hz 0912-15 V, 60 Hz or 12-24 V DC 13(1)
0-10 V or PWM Dimmable Driver,12-15 V, 60 Hz or 12-24 V DC 13-DIM(1)
(1) Requires appropriate transformer.
INPUT VOLTAGEDescription Code
120-277 V, 50/60 Hz 0912-15 V, 60 Hz or 12-24 V DC 13(1)
0-10 V or PWM Dimmable Driver,12-15 V, 60 Hz or 12-24 V DC 13-DIM(1)
(1) Requires appropriate transformer.
FINISHDescription Code
Stainless steel SSBlack, powder coated CBWhite, powder coated CWSilver, powder coated CS
FINISHDescription Code
Stainless steel SSBlack, powder coated CBWhite, powder coated CWSilver, powder coated CS
www.lumascape.com C1107US 6 Sep 2013
IK10IP68
Ingrade LS553LED Via
LS553LED-xxx-xx-x-21-xx½" NPT adapter. Luminaire provided with
6.5 ft (2.0 m) hook-up wire.
Ø 3.5” (90 mm)
3.1”
(78
mm
)0.
5” (1
3 m
m)
LS553LED-xxx-xx-x-23-3-xxIncludes pre-installation blockout with a ½" NPT adapter. Luminaire provided
with 1' (0.3 m) hook-up wire.
Ø 3.7” (94 mm)
11.0
” (28
0 m
m)
0.5”
(13
mm
)
LS553LED-xxx-xx-x-23-4-xxIncludes pre-installation blockout
with 2 x ½" NPT adapters. Luminaire provided with 1' (0.3 m) hook-up wire.
Ø 3.7” (94 mm)
11.0
” (28
0 m
m)
0.5”
(13
mm
)
Specifications
Lamp Source 1 W LED□ White (4 300 K typical)■ Warm white (3 000 K typical)■ Blue (470 nm)Other colors by request
Approved Use Suitable for wet locationsSuitable for use in poured concreteInherently protected Type IC
Control Options 0-10 V (current sourcing)PWMOn-site or factory programmable brightness
IP Rating IP68
Construction 316 marine grade stainless steel
Installation Types Pre-Installation BlockoutConcrete pour, drive-over etc. Direct BurialLandscapes, planters etc.
Drive-over With 8-aperture version and pre-installation blockout
Static Load Rating One aperture - 2 200 lb (1 000 kg)Two aperture - 2 200 lb (1 000 kg)Four aperture - 3 300 lb (1 500 kg)Eight aperture - 4 400 lb (2 000 kg)Ratings are with pre-installation blockout only
Impact Rating IK10 for 8 aperture model
Standard Inclusions MicroAntiLeach™ wire entry
Remote Transformers / Power SuppliesOrder separately
Refer to Technical Data sectionfor application specific options
Ambient Operating Temperature
-4 °F to 122 °F (-20 °C to +50 °C)
Surface Temperature ≤113 °F (45 °C)
Photometrics Refer to www.lumascape.com
Any luminaire can become hot - take care with appropriate use and placement
The LS553LED is a rugged, side emitting marker light constructed of 316 marine grade stainless steel. This luminaire is ideal for pathways, pedestrian malls and other public spaces. Some models are also suitable for use in low speed traffic areas. The construction and technology used in this luminaire ensures a long service life.
OPTIONAL
LS553LED Via
1300 Industrial Road, Unit #19San Carlos, CA 94070FREE CALL 1-866-695-5862 US & [email protected]
www.lumascape.com C1107US 6 Sep 2013
IK10IP68
Ingrade LS553LED Via
LS553LED-xxx-xx-x-21-xx½" NPT adapter. Luminaire provided with
6.5 ft (2.0 m) hook-up wire.
Ø 3.5” (90 mm)
3.1
” (7
8 m
m)
0.5
” (1
3 m
m)
LS553LED-xxx-xx-x-23-3-xxIncludes pre-installation blockout with a ½" NPT adapter. Luminaire provided
with 1' (0.3 m) hook-up wire.
Ø 3.7” (94 mm)
11.0
” (2
80 m
m)
0.5
” (1
3 m
m)
LS553LED-xxx-xx-x-23-4-xxIncludes pre-installation blockout
with 2 x ½" NPT adapters. Luminaire provided with 1' (0.3 m) hook-up wire.
Ø 3.7” (94 mm)
11.0
” (2
80 m
m)
0.5
” (1
3 m
m)
Specifications
Lamp Source 1 W LED□ White (4 300 K typical)■ Warm white (3 000 K typical)■ Blue (470 nm)Other colors by request
Approved Use Suitable for wet locationsSuitable for use in poured concreteInherently protected Type IC
Control Options 0-10 V (current sourcing)PWMOn-site or factory programmable brightness
IP Rating IP68
Construction 316 marine grade stainless steel
Installation Types Pre-Installation BlockoutConcrete pour, drive-over etc. Direct BurialLandscapes, planters etc.
Drive-over With 8-aperture version and pre-installation blockout
Static Load Rating One aperture - 2 200 lb (1 000 kg)Two aperture - 2 200 lb (1 000 kg)Four aperture - 3 300 lb (1 500 kg)Eight aperture - 4 400 lb (2 000 kg)Ratings are with pre-installation blockout only
Impact Rating IK10 for 8 aperture model
Standard Inclusions MicroAntiLeach™ wire entry
Remote Transformers / Power SuppliesOrder separately
Refer to Technical Data sectionfor application specific options
Ambient Operating Temperature
-4 °F to 122 °F (-20 °C to +50 °C)
Surface Temperature ≤113 °F (45 °C)
Photometrics Refer to www.lumascape.com
Any luminaire can become hot - take care with appropriate use and placement
The LS553LED is a rugged, side emitting marker light constructed of 316 marine grade stainless steel. This luminaire is ideal for pathways, pedestrian malls and other public spaces. Some models are also suitable for use in low speed traffic areas. The construction and technology used in this luminaire ensures a long service life.
OPTIONAL
LS553LED Via
1300 Industrial Road, Unit #19San Carlos, CA 94070FREE CALL 1-866-695-5862 US & [email protected]
www.lumascape.com C1107US 6 Sep 2013
Highway 42 & Highway G Improvement Project 10June 2015
Birding Trail Lighting ImprovementsFixture
Entry Lights: Plan View
Manufacturer: Lumascape Lighting 3.5” Round Directional Recessed LED (LS553LED Via); one aperture; warm white 3K; black powder coat finish; mounted on concrete tube, 30’ O.C.Note: Lights to be provided and installed by owner. Contractor to coordinate and incorporate outer housing sleeve and conduit into concrete sonotube.
To Beach ParkTo Downtown COUNTY HIGHWAY G
30’ O.C., Typ.
Lumascape USA, Inc. 1300 Industrial Road, Unit #19San Carlos, CA 940701-866-695-5862 [email protected]
Two path entry lights to be field located & approved by owner
Future trailhead improvements
Conduit
Existing Grade
Concrete Sonotube
IK10IP68
Ingrade LS553LED Via
LS553LED-xxx-xx-x-21-xx½" NPT adapter. Luminaire provided with
6.5 ft (2.0 m) hook-up wire.
Ø 3.5” (90 mm)
3.1”
(78
mm
)0.
5” (1
3 m
m)
LS553LED-xxx-xx-x-23-3-xxIncludes pre-installation blockout with a ½" NPT adapter. Luminaire provided
with 1' (0.3 m) hook-up wire.
Ø 3.7” (94 mm)
11.0
” (28
0 m
m)
0.5”
(13
mm
)
LS553LED-xxx-xx-x-23-4-xxIncludes pre-installation blockout
with 2 x ½" NPT adapters. Luminaire provided with 1' (0.3 m) hook-up wire.
Ø 3.7” (94 mm)
11.0
” (28
0 m
m)
0.5”
(13
mm
)
Specifications
Lamp Source 1 W LED□ White (4 300 K typical)■ Warm white (3 000 K typical)■ Blue (470 nm)Other colors by request
Approved Use Suitable for wet locationsSuitable for use in poured concreteInherently protected Type IC
Control Options 0-10 V (current sourcing)PWMOn-site or factory programmable brightness
IP Rating IP68
Construction 316 marine grade stainless steel
Installation Types Pre-Installation BlockoutConcrete pour, drive-over etc. Direct BurialLandscapes, planters etc.
Drive-over With 8-aperture version and pre-installation blockout
Static Load Rating One aperture - 2 200 lb (1 000 kg)Two aperture - 2 200 lb (1 000 kg)Four aperture - 3 300 lb (1 500 kg)Eight aperture - 4 400 lb (2 000 kg)Ratings are with pre-installation blockout only
Impact Rating IK10 for 8 aperture model
Standard Inclusions MicroAntiLeach™ wire entry
Remote Transformers / Power SuppliesOrder separately
Refer to Technical Data sectionfor application specific options
Ambient Operating Temperature
-4 °F to 122 °F (-20 °C to +50 °C)
Surface Temperature ≤113 °F (45 °C)
Photometrics Refer to www.lumascape.com
Any luminaire can become hot - take care with appropriate use and placement
The LS553LED is a rugged, side emitting marker light constructed of 316 marine grade stainless steel. This luminaire is ideal for pathways, pedestrian malls and other public spaces. Some models are also suitable for use in low speed traffic areas. The construction and technology used in this luminaire ensures a long service life.
OPTIONAL
LS553LED Via
1300 Industrial Road, Unit #19San Carlos, CA 94070FREE CALL 1-866-695-5862 US & [email protected]
www.lumascape.com C1107US 6 Sep 2013
8”
IK10IP68
Ingrade LS553LED Via
LS553LED-xxx-xx-x-21-xx½" NPT adapter. Luminaire provided with
6.5 ft (2.0 m) hook-up wire.
Ø 3.5” (90 mm)
3.1”
(78
mm
)0.
5” (1
3 m
m)
LS553LED-xxx-xx-x-23-3-xxIncludes pre-installation blockout with a ½" NPT adapter. Luminaire provided
with 1' (0.3 m) hook-up wire.
Ø 3.7” (94 mm)
11.0
” (28
0 m
m)
0.5”
(13
mm
)
LS553LED-xxx-xx-x-23-4-xxIncludes pre-installation blockout
with 2 x ½" NPT adapters. Luminaire provided with 1' (0.3 m) hook-up wire.
Ø 3.7” (94 mm)
11.0
” (28
0 m
m)
0.5”
(13
mm
)
Specifications
Lamp Source 1 W LED□ White (4 300 K typical)■ Warm white (3 000 K typical)■ Blue (470 nm)Other colors by request
Approved Use Suitable for wet locationsSuitable for use in poured concreteInherently protected Type IC
Control Options 0-10 V (current sourcing)PWMOn-site or factory programmable brightness
IP Rating IP68
Construction 316 marine grade stainless steel
Installation Types Pre-Installation BlockoutConcrete pour, drive-over etc. Direct BurialLandscapes, planters etc.
Drive-over With 8-aperture version and pre-installation blockout
Static Load Rating One aperture - 2 200 lb (1 000 kg)Two aperture - 2 200 lb (1 000 kg)Four aperture - 3 300 lb (1 500 kg)Eight aperture - 4 400 lb (2 000 kg)Ratings are with pre-installation blockout only
Impact Rating IK10 for 8 aperture model
Standard Inclusions MicroAntiLeach™ wire entry
Remote Transformers / Power SuppliesOrder separately
Refer to Technical Data sectionfor application specific options
Ambient Operating Temperature
-4 °F to 122 °F (-20 °C to +50 °C)
Surface Temperature ≤113 °F (45 °C)
Photometrics Refer to www.lumascape.com
Any luminaire can become hot - take care with appropriate use and placement
The LS553LED is a rugged, side emitting marker light constructed of 316 marine grade stainless steel. This luminaire is ideal for pathways, pedestrian malls and other public spaces. Some models are also suitable for use in low speed traffic areas. The construction and technology used in this luminaire ensures a long service life.
OPTIONAL
LS553LED Via
1300 Industrial Road, Unit #19San Carlos, CA 94070FREE CALL 1-866-695-5862 US & [email protected]
www.lumascape.com C1107US 6 Sep 2013
4’