parker kuroda complete catalogue

PNEUMATIC EQUIPMENTActuators

Miniature HI-ROTOR/PRN SeriesStandard Type,Variable Oscillation Angle Type

Miniature HI-PAL HI-ROTOR/PRH SeriesCubic Mount HI-ROTOR/QR Series

Standard Type,Variable Oscillation Angle Type

Step HI-ROTOR/SH SeriesHI-ROTOR/PRN SeriesHydro-cushion/CRN SeriesHydraulic HI-ROTOR/HRN SeriesRotary Actuator

2-stop Position Type/RPM SeriesMulti-stop Position Type/SRP Series

Rotary Table2-stop Position Type/TRP,TRPJ SeriesMulti-stop Position Type/TSR,TSRJ Series

Miniture Cylinder/Z3 SeriesStandard Type, Double rod Type,Cutstom Made

Miniature Cylinder/J1 SeriesStandard Type, Double rod Type,Direct Mount Type, Custom Made

Air Cylinder/K1 SeriesStandard Type, Double Rod Type,Custom Made

Air cylinder/A1 SeriesStandard Type, Double Rod Type,Custom Made

Cubic Mount Cylinder/Q1 SeriesStandard Type,Non-rotating Piston Rod Type

Flat Cylinder/X1 SeriesStandard Type, Double Rod Type,Custom Made

HI-PAL CylinderAir Cylinder With Lock MechanismHybrid-armFloat CouplerShock AbsorberParallel Gripper/GPR SeriesGrip & Rotated Parallel Gripper/GTS SeriesParallel Gripper With Cross Roller/GPCR SeriesParallel Gripper With Linear Guide/GPCL SeriesExtremely Thin Parallel Gripper/GPDL SeriesA Synchronous Type Parallel Gripper/GPEL SeriesCrab Type Parallel Gripper/GPK SeriesRotating Gripper/GVC SeriesRotating Gripper 180°Finger Opening/GVH SeriesMechanical Type Parallel Gripper/GPML SeriesMechanical Type Parallel Gripper/GPM SeriesSolenoid Valve for Vacuum VA01SeriesMulti-function Vacuum Unit/KPV SeriesVacuum Unit With Built-in Ejector/KEV SeriesVacuum SensorVacuum PadHigh Accuracy Single Axis Module/SG SeriesLight Duty Single Axis Module/KZG Series

Directional Control Valves

2 Port Solenoid Valve/AS Series2,3,4 Port Solenoid Valve/SS Series3,4 Port Miniature Solenoid Valve/SS Series4 Port Miniature Solenoid Valve/PC1B,RC1B Series3,5 Port Miniature Solenoid Valve/PC2,RC2 Series3,5 Port Solenoid Valve/PC5,RC5 Series3,5 Port Solenoid Valve/PC13,RC13 Series4,5 Port Latched Type Solenoid Valve5 Port Solenoid Valve/PC06,RC06 Series5 Port Solenoid Valve/PC08,RC08 Series5 Port Solenoid Valve/PC15 Series3 Port Miniature Solenoid Valve/A00 Series5 Port Solenoid Valve/A05,12,20 Series5 Port Solenoid Valve/K20 Series3,5 Port Solenoid Valve/PM Series3,5 Port Solenoid Valve/A SeriesManual Control Valve/HV SeriesMicro ValveManual Valve/M SeriesMechanical Valve/M Series3,5 Port Air Operated Valve/VC Series3,5 Port Air Operated Valve/YC Series5 Port Air Operated Valve/VM Series3,5 Port Air Operated Valve/V SeriesAir Operated Ball Valve/Gemini Valve

Other Equipment

Speed controller With Push-in FittingSpeed ControllerMetering ValveAir MufflerCleanup MufferMiniature In-line Filter For VacuumRotary JointQuick Exhaust ValveShuttle ValveCheck ValvePerma-stopPush-in FittingMiniature FittingTubeSpiral TubeMulti Straight Tube

Air Cleaning Equipment

QUBE Series Air Combination UnitQUBE Series Air Combination UnitQUBE Series Air FilterQUBE Series Coalescing FilterQUBE Series Sludge FilterQUBE Series Air RegulatorQUBE Series Air LubricatorQUBE Series Integral Filter-RegulatorQUBE Series Shut-off ValveAir Combination Unit

Miniature TypeAir Combination Unit

Miniature TypeAir Filter Miniature TypeSludge Filter Miniature TypeMicro Mist Filter Miniature TypeAir Regulator Miniature TypeAir Lubricator Miniature TypeIntegral Filter-Regulator

Miniature TypeRelief ValvePressure GageAir Dryer/KAD SeriesMembrane type Air Dryer Q-Fit Dryer/KMD Series

INDEX

Actuators Page 33Page 33Page 39Page 45

DirectionalControl Valves

Other Equipment

Air CleaningEquipment

Introduction ofKURODA CADLIBRARY

3

Actuators

Model No.

PRNA1S

PRNA3S

PRNA10S

PRNA20S

PRN30S

PRNA1D

PRNA3D

PRNA10D

PRNA20D

PRN30D

Vane type Oscillation angle Oscillationstarting point

Output torque（N･cm）

Pressure range（MPa）

Single vane

Double vane

90˚

90˚

90˚

90˚

90˚

45˚

45˚

45˚

45˚

45˚

28.6

71

211

388

770

0.2～0.7

0.2～1

90˚180˚270˚90˚

180˚270˚90˚

180˚270˚90˚

180˚270˚90˚

180˚270˚

45˚、90˚

45˚

45˚、90˚

45˚

45˚、90˚

45˚

45˚、90˚

45˚

45˚

12.9

31

98

170

319

0.2～1

0.2～0.7

MINIATURE HI-ROTORPRN SeriesVane type rotary actuator

● Proximity switch unit mountable.（Note）Output torque is the value at 0.5 MPa.

Model No.

PROA3S

PROA10S

PROA20S

PRO30S

PROA3D

PROA10D

PROA20D

PRO30D




Single vane

Double vane

30～180˚

30～270˚

30～90˚

90˚

45˚

45˚

31

98

170

319

71

211

388

770

0.2～0.7

0.2～1

0.2～0.7

0.2～1

MINIATURE HI-ROTORVARIABLE OSCILLATIONANGLE TYPEPRO Series


4

Model No.

PRHA10S

PRHA20S

PRH30S

PRHA10D

PRHA20D

PRH30D



Pressure range（MPa） Valve model

Single vane

Double vane

90˚180˚270˚90˚

180˚270˚90˚

180˚270˚

90˚

90˚

90˚

45˚、90˚

45˚

45˚、90˚

45˚

45˚

45˚

45˚

45˚

98

170

319

211

388

770

0.2～0.7

PCS245

0.2～0.8

0.2～0.7

0.2～0.8

MINIATUREHI-PAL HI-ROTORPRH SeriesValve combined HI-ROTOR

CUBIC MOUNT HI-ROTORQR Series


Model No.

QR3S

QR10S

QR20S

QR30S




Single vane

90˚180˚90˚

180˚270˚90˚

180˚90˚

180˚270˚

90˚

90˚

45˚

90˚

45˚

27.9

319

159

86

0.3～0.7

0.2～0.7


CUBIC MOUNT HI-ROTORVARIABLE OSCILLATIONANGLE TYPEQRO Series

Model No.

QRO3S

QRO10S

QRO20S

QRO30S




Single vane30～180˚

30～270˚

90˚

45˚

27.9

86

159

319

0.3～0.7

0.2～0.7


STEP HI-ROTORSH SeriesUnique vane type oscillatingactuator consisting of acombination of two HI-ROTORsdesigned for 2 and 3-step feeds.

Model No.

SH5S

SH20S

SH5D

SH20D

Vane typeOscillation angle

Internal HI-ROTOR External HI-ROTOROscillationstarting point

Output torque（N･cm）Internal HI-ROTOR External HI-ROTOR

Single vane

Double vane

30～180˚

30～180˚

30～90˚

30～90˚

30～180˚

30～180˚

30～180˚

30～180˚

90˚

90˚

90˚

90˚

47.9

195

96

390

227

575

231

575


5

Model No.

PRN50S

PRN150S

PRN300S

PRN800S

PRN50D

PRN150D

PRN300D

PRN800D




Single vane

Double vane

1040

3500

6800

20600

0.2～1

90˚180˚270˚280˚90˚

180˚270˚280˚90˚

180˚270˚280˚90˚

180˚270˚280˚90˚

100˚90˚

100˚90˚

100˚90˚

100˚

45˚40˚、45˚

45˚40˚45˚

40˚、45˚45˚40˚45˚

40˚、45˚45˚40˚45˚

40˚、45˚45˚40˚

40˚、45˚40˚

40˚、45˚40˚

40˚、45˚40˚

40˚、45˚40˚

479

1500

2850

10200

0.2～1

HI-ROTORPRN SeriesVane type rotary actuator

●M type switch（reed type, proximity type）mountable.（Note）Output torque is the value at 0.5 MPa.

HI-PAL HI-ROTORPRH SeriesValve combined HI-ROTOR

Model No.

PRH50S

PRH150S

PRH300S

PRH800S

PRH50D

PRH150D

PRH300D

PRH800D



Pressure range（MPa） Valve model

Single vane

Double vane

90˚180˚270˚280˚90˚

180˚270˚280˚90˚

180˚270˚280˚90˚

180˚270˚280˚90˚

100˚90˚

100˚90˚

100˚90˚

100˚

45˚40˚、45˚

45˚40˚45˚

40˚、45˚45˚40˚45˚

40˚、45˚45˚40˚45˚

40˚、45˚45˚40˚

40˚、45˚40˚

40˚、45˚40˚

40˚、45˚40˚

40˚、45˚40˚

479

1500

2850

10200

1040

3500

6800

20600

0.2～0.8

PCS245

PCS2413

PCS2408

PCS245

PCS2413

PCS2408

0.2～0.8

●M type switch（reed type, proximity type）mountable.（Note）Output torque is the value at 0.5 MPa.

6

Model No.

CRN50

CRN150

CRN300

CRN800

Oscillation angle Oscillationstarting point

Range of load（N･cm）

Max.absorbed energy（mJ） Applicable HI-ROTOR

90˚100˚180˚270˚280˚90˚

100˚180˚270˚280˚90˚

100˚180˚270˚280˚90˚

100˚180˚270˚280˚

45˚40˚45˚45˚40˚45˚40˚45˚45˚40˚45˚40˚45˚45˚40˚45˚40˚45˚45˚40˚

2942

9807

19613

58840

981

2942

5884

19613

PRN50PRH50

PRN150PRH150

PRN300PRH300

PRN800PRH800

HYDRO-CUSHIONCRN SeriesShock absorber for HI-ROTOR

Model No.

HRN10SHRN10DHRN15SHRN15DHRN20SHRN20DHRN30SHRN30DHRN100SHRN100DHRN200SHRN200DHRN400SHRN400DHRN700SHRN700D

Max.oscillation angle

Min.operating pressure（MPa）

Allowable load（N）Radial Thrust

270˚90˚

270˚90˚

270˚90˚

270˚90˚

270˚90˚

270˚90˚

270˚90˚

270˚90˚

7 1

9.8

19.6

49

78.4

147

294

343

343

4.9

9.8

24.5

39.2

68.6

137.2

186.6

166.8

HYDRAULIC HI-ROTORHRN SeriesHydraulic vane type rotary actuator.

Rated pressure（MPa）

● Shaft/Double end（keyway and square）●Mounting/Flange mounting

Model No.

HRN10S-C

HRN15S-C

HRN20S-C

HRN30S-C

HRN100S-C

HRN200S-C

HRN400S-C

HRN700S-C

Max.oscillation angle

Min.operating pressure（MPa）

Allowable load（N）Radial Thrust

180˚90˚

180˚90˚

180˚90˚

180˚90˚

180˚90˚

180˚90˚

180˚90˚

180˚90˚

7 1

9.8

19.6

49

78.4

147

294

343

343

4.9

9.8

24.5

39.2

68.6

137.2

186.6

166.8

HYDRAULIC HI-ROTORWITH CUSHIONHRN SeriesHydraulic vane type rotaryactuator with cushion mechanism.

Rated pressure（MPa）

● Shaft/Double end（keyway and square）●Mounting/Flange mounting

7

2-STOP POSITION TYPEROTARY ACTUATORRPM SeriesUse of double piston system hassuccessfully realized compactdesign and high torque.

Model No.

RPM-14

RPM-16

RPM-18

RPM-22

Cylinder ID Oscillationangle

Adjustableangle range

Output torque（N･m）


φ14、φ20

φ16、φ24

φ18、φ26

φ22、φ30

90˚180˚90˚

180˚90˚

180˚90˚

180˚

70˚～ 95˚160˚～185˚70˚～ 95˚

160˚～185˚70˚～ 95˚

160˚～185˚70˚～ 95˚

160˚～185˚

1.4

2.6

4.3

7.0

0.1～0.7

● RC, ZC type switch（reed type, proximity type）mountable.（Note）Output torque（theoretical output）is the value at 0.5 MPa.

2-STOP POSITION TYPEROTARY TABLETRP,TRPJ SeriesIn addition to compactly designedstandard type, a series of rotarytables with swivel joint areavailable realizing neat pipearrangement.

Model No.

TRP-16

TRP-18TRPJ-18TRP-22TRPJ-22





φ16、φ24

φ18、φ26

φ22、φ30

90˚180˚90˚

180˚90˚

180˚

70˚～ 95˚160˚～185˚70˚～ 95˚

160˚～185˚70˚～ 95˚

160˚～185˚

2.6

4.3

7.0

0.1～0.7


MULTI-STOP POSITION TYPEROTARY TABLETSR,TSRJ SeriesIn addition to compactly designedstandard type, a series of rotarytables with swivel joint areavailable, realizing neat pipearrangement.

Model No.

TSR-16

TSR-18TSRJ-18TSR-22TSRJ-22





φ16、φ24

φ18、φ26

φ22、φ30

max.180˚ 120˚～185˚

0.8

1.4

2.1

0.2～0.7


MULTI-STOP POSITION TYPEROTARY ACTUATORSRP SeriesUse of double piston system hassuccessfully realized compactdesign and high torque.

Model No.

SRP-13SRP-14SRP-16SRP-18SRP-22





φ13、φ18φ14、φ22φ16、φ24φ18、φ26φ22、φ30

max.180˚ 120˚～185˚

0.240.450.81.42.1

0.3～0.7

0.2～0.7


8

MINIATURE CYLINDERZ3 SeriesNon-lubricated air applicable.

Series

Z3○1

Z3○0

Z3○2

Acting Bore size（mm）

Standard stroke（mm）


Single acting（Retracted）

Single acting（Extended）

Doubleacting

φ2.5φ4φ6φ10φ16φ6φ10φ16φ6φ10φ16

5、05、10、15、20

15、30、45、60

15、30

15、30、45、60

0.35～0.7

0.3～0.7

0.15～0.7

0.35～0.7

0.15～0.7

0.12～0.70.08～0.70.06～0.7

●Mounting/Boreφ2.5～φ4：Nose mounting onlyBoreφ6,φ10,φ16：Nose, Foot, Flange and Female clevis mounting

● Switch/Boreφ6,φ10,φ16：M type switch（reed type, proximity type）mountable.●Cushion/Boreφ2.5,φ4：Non-cushion Bore φ6,φ10,φ16：Rubber cushion

MINIATURE CYLINDERDOUBLE ROD TYPEZ3○7 Series

Series

Z3○7




Double actingφ10φ16

15、30、45、60 0.1～0.7

●Mounting/Nose, Foot and Flange mounting● Switch/M type switch（reed type, proximity type）mountable.●Cushion/Rubber cushion



φ10φ16φ10φ16φ10φ16

0.15～0.7

0.2～0.7

0.1～0.7

CUSTOM MADECYLINDER

Non rotating piston rod cylinder/Z3○U

Acting


Bore size（mm）

Double acting

φ10、φ16

0.1～0.7

Cylinder built-in speed controller/Z3GP2A miniature speed controller（Meter-out type）is built-in

Single acting（Retracted）Single acting（Extended）

Double acting

Acting


Bore size（mm）

Double acting

φ10、φ16

φ10：0.2～0.7φ16：0.1～0.7

Cylinder with air cushion/Z3G2

Acting


Bore size（mm）

Double acting

φ10、φ16

φ10：0.12～0.7φ16：0.10～0.7

Cylinder built-in linear bearing/Z3GB2

9

Acting


Bore size（mm）

Double acting

φ10、φ16

0.1～0.7

CUSTOM MADECYLINDER

Dual stroke cylinder/Z3○D2This cylinder consists of two cylindersconnected in series and united as one unit.The stroke is controlled in two steps.

Acting


Bore size（mm）

Double acting

φ10、φ16

φ10：0.08～0.7φ16：0.06～0.7

Dual stroke cylinder/Z3○D7This cylinder consists of two cylinders connectedon both head cover side form one unit.The stroke is controlled in three steps.

Acting


Bore size（mm）

Double acting

φ10、φ16

0.1～0.7

Adjustable stroke cylinder/Z3○A7On the end where the rod is extended, the stroke isadjustable with stopper within a range of 0 to 15mm.

Acting


Bore size（mm）

Double acting

φ10、φ16

φ10：0.08～0.7φ16：0.06～0.7

Adjustable stroke cylinder/Z3○A2On the rod retracted end, the stroke is adjustablewith a adjustable bolt within a range of 0 to 15mm.

Air-hydro cylinder/Z3○OCylinders of this series are for Air-hydrosystems and are suitable for use at low speedsof 50mm/s or less.

Acting


Bore size（mm）

Double acting

φ6、φ10、φ16

φ 6：0.3 ～0.7φ10：0.2 ～0.7φ16：0.15～0.7

High-temperature resistant cylinder/Z3○ZSince cylinders of this series use packings etc.made of heat-resistant materials, they canoperate at high temperatures up to 150℃

Acting

Double acting


Bore size（mm）


φ 6φ10φ16φ 6φ10φ16

0.35～0.7

0.15～0.7

0.15～0.70.1～0.70.08～0.8

Cylinder for use in clean room/CFZ3

Acting


Bore size（mm）

Double acting

φ6、φ10、φ16

φ 6：0.3 ～0.7φ10：0.2 ～0.7φ16：0.15～0.7

10

Series

J1○1

J1○0

J1○2






Double acting

φ20

φ25

φ32

φ40

φ50

φ63

φ20φ25φ32φ40φ20φ25φ32φ40

0.15～1

0.15～1

0.05～1

0.02～1

MINIATURE CYLINDERJ1 SeriesNon-lubricated air applicable.

Series

J1○7




Double acting

φ20

φ25

φ32

φ40

φ50

φ63

25、50、75、100、125、150

25、50、75、100、125、150、175、200

25、50、75、100、125、150

25、50、75、100、125、150、175、200

15、25、30、50、75、100、125、150、175、200

15、25、30、50、75、100、125、150、175、200、250、300

15、25、30、50、75、100、125、150175、200、250、300、350、400

15、25、30、50、75、100、125、150、175200、250、300、350、400、450、500

25、50、75、100、150、200、250300、350、400、450、500

15、25、30、50、75、100、125、150、175、200

15、25、30、50、75、100、125、150、175、200、250、300

15、25、30、50、75、100、125、150175、200、250、300、350、400

15、25、30、50、75、100、125、150、175200、250、300、350、400、450、500

25、50、75、100、150、200、250300、350、400、450、500

0.05～1

0.02～1

MINIATURE CYLINDERDOUBLE ROD TYPEJ1○7 Series

●Mounting/Nose, Foot and Flange mounting● Switch/AX, ZC type switch（reed type, proximity type）mountable.●Cushion/Boreφ20～φ40：Rubber cushion Boreφ50,φ63：Air cushion● Specific type/Bellows

●Mounting/Nose, Foot and Flange mounting● Switch/AX, ZC type switch（reed type, proximity type）mountable.●Cushion/Boreφ20～φ40：Rubber cushion Boreφ50,φ63：Air cushion● Specific type/Bellows

11

DIRECT MOUNT CYLINDERJ1○E SeriesThe rectangular rod cover of thecylinder is directly mountable onthe unit to be mated.Using this cylinder will result notonly in saving space but alsoimproving the mounting strengthand accuracy.

Series

J1○E1

J1○E0

J1○E2J1○E7

Acting Bore size（mm） Standard stroke（mm） Pressure range

（MPa）



Double acting

φ20

φ25

φ32

φ40

φ50

φ63

φ20φ25φ32φ40φ20φ25φ32φ40

25、50、75、100、125、150

25、50、75、100、125、150、175、200

25、50、75、100、125、150

25、50、75、100、125、150、175、200

15、25、30、50、75、100125、150、175、200

15、25、30、50、75、100125、150、175、200、250、300

15、25、30、50、75、100、125、150175、200、250、300、350、400

15、25、30、50、75、125、150、175200、250、300、350、400、450、500

25、50、75、100、150、200、250300、350、400、450、（500）

0.15～1

0.15～1

0.05～1

0.02～1

● Supporting type/Front mount type, side mount type● Switch/AX, ZC type switch（reed type, proximity type）mountable.●Cushion/Boreφ20～φ40：Rubber cushion Bore φ50,φ63：Air cushion



φ25φ40φ25φ40φ25φ40φ50φ63φ25φ40φ50φ63

0.15～1

0.15～1

0.1～1

0.05～1

0.1～1

0.05～1

CUSTOM MADECYLINDER

Non-rotating piston rod cylinder/J1○U

Acting


Bore size（mm）

Double actingφ20、φ25、φ32、φ40

φ50、φ63φ20～φ40：0.05～1φ50、φ63：0.02～1

Short length cylinder/J○NDCylinders short in overall length：The nose screw portion on the head cover hasbeen cut off.

Single acting（Retracted）Single acting（Extended）

Double acting

Double acting（Double rod）

Acting


Bore size（mm）

Double acting

φ20、φ25、φ32、φ40

0.1～1

Stainless steel cylinder/J1○SThe cylinder tube, rod cover and head cover,piston rod are made of stainless steel.

Acting


Bore size（mm）

Double acting

φ20、φ25、φ32、φ40

0.1～1

High-temperature resistant cylinder/J1○XSince cylinders of this series use packings etc.made of heat-resistant materials, they canoperate at high temperatures up to 120℃

12

CUSTOM MADECYLINDER

Acting


Bore size（mm）


φ50、φ63φ20～φ40：0.05～1φ50、φ63：0.02～1

Port position in direction ofpiston axis/J1GNB

Acting


Bore size（mm）


φ50、φ63

0.1～1

Dual stroke cylinder/J1○D2This cylinder consists of two cylindersconnected in series and united as one unit.The stroke is controlled in two steps.

Acting


Bore size（mm）


φ50、φ63

0.1～1

Dual stroke cylinder/J1○D7This cylinder consists of two cylinders connectedon both head cover sides from one unit.The stroke is controlled in three steps.

Acting


Bore size（mm）


φ50、φ63

0.1～1

Adjustable stroke cylinder/J1○A7On the end where the rod is extended, thestroke is adjustable with a stopper within arange of 0 to 50 mm.

Acting


Bore size（mm）


φ50、φ63

0.1～1

Adjustable stroke cylinder/J1○A2On the rod retracted end, the stroke is adjustablewith a adjustable bolt within a range of 0 to 50 mm.

Series

K1○2




Double acting

φ32φ40φ50φ63φ80φ100φ125

50、75、100、125、150、200、250300、350、400、450、500

0.05～1

AIR CYLINDERK1 SeriesNon-lubricated air applicable.

●Mounting/Nose, Foot, Flange, Male clevis, Femals clevis and Trunion mounting● Switch/AX, SR type switch（reed type, proximity type）mountable.●Cushion/Air cushion● Specific type/Bellows

13

Series

K1○7




Double acting

φ32φ40φ50φ63φ80φ100φ125

50、75、100、125、150、200、250300、350、400、450、500

0.1～1

AIR CYLINDERDOUBLE ROD TYPEK1○7 Series

●Mounting/Nose, Foot, Flange, mounting● Switch/AX, SR type switch（reed type, proximity type）mountable.●Cushion/Air cushion● Specific type/Bellows

CUSTOM MADECYLINDER

Acting


Bore size（mm）


φ40φ50φ63φ80φ100

0.1～1

Non-rotating piston rod cylinder/K1○U

Acting


Bore size（mm）

Double acting

φ32、φ40、φ50、φ63、φ80

0.05～1

Cylinder with hollow rod/K1○RPThe hollow piston rod allows the passage of airpressure, etc.

Acting


Bore size（mm）

Double acting

φ40、φ50、φ63、φ80、φ100

0.1～0.7

Dual stroke cylinder/K1○D2This cylinder consists of two cylindersconnected in series and united as one unit.The stroke is controlled in two steps.

Acting


Bore size（mm）

Double actingφ32、φ40、φ50、φ63φ80、φ100、φ125

0.05～0.7

Dual stroke cylinder/K1○D7This cylinder consists of two cylinders connectedon both head cover sides from one unit.The stroke is controlled in three steps.

Acting


Bore size（mm）


0.1～1

Adjustable stroke cylinder/K1○A7On the end where the rod is extended, thestroke is adjustable with a stopper within arange of 0 to 50 mm.

Acting


Bore size（mm）


0.05～1

Adjustable stroke cylinder/K1○A2On the rod retracted end, the stroke isadjustable with a adjustable bolt within a rangeof 0 to 50 mm.

14

CUSTOM MADECYLINDER

Acting


Bore size（mm）

Double acting

φ40、φ50、φ63、φ80、φ100

0.05～1

High-temperature resistant cylinder/K1○XSince cylinders of this series use packingsmade of special materials, they can operate athigh temperatures up to 120℃

Acting


Bore size（mm）


φ80、φ100

0.2～1

Air-hydro cylinder/K1○OCylinders of this series are for Air-hydrosystems and are suitable for use at low speedsof 50 mm/s or less.

Series

A1○2


Maximum stroke（mm）


Double acting

φ125φ140φ160φ180φ200φ250

2000 0.1～1

AIR CYLINDERA1 SeriesHeavy duty type cylinder.

●Mounting/Nose, Foot, Flange, Male clevis, Female clevis and Trunion mounting● Switch/AX, SR type switch（reed type, proximity type）mountable.●Cushion/Air cushion● Specific type/Bellows

Series

A1○7




Double acting

φ125φ140φ160φ180φ200φ250

1200 0.1～1

AIR CYLINDERDOUBLE ROD TYPEA1○7 Series

●Mounting/Nose, Foot and Flange mounting● Switch/AX, SR type switch（reed type, proximity type）mountable.●Cushion/Air cushion● Specific type/Bellows

CUSTOM MADECYLINDER

Acting


Bore size（mm）

Double acting

φ125、φ140、φ160

0.1～1

Adjustable stroke cylinder/A1○A2On the rod retracted end, the stroke is adjustablewith a adjustable bolt within a range of 0 to 50 mm.

15

Series

Q1○1

Q1○0

Q1○2






Double acting

φ6φ10φ16φ20φ25φ32φ6φ10φ16φ20φ25φ32φ6φ10φ16φ20φ25φ32

5、10、15

5、10、15

5、10、15、20、25、30

5、10、15、20、25、30、40、50

0.3～0.7

0.15～0.7

0.2～0.7

0.35～0.7

0.15～0.7

0.2～0.7

0.15～0.7

0.1～0.7

COMPACT CUBIC MOUNTCYLINDERQ1 SeriesRigidly desidned cubical bodyimproves design flexibility andaccuracy.

● Supporting type/Rod side mount type, Head side mount type and Solid mount type● Switch/K type switch（reed type, proximity type）mountable.●Cushion/Rubber cushion

Series

Q1○U2




Double acting

φ6φ10φ16φ20φ25φ32

5、10、15、20、25、30

5、10、15、20、25、30、40、50

0.15～0.7

0.1～0.7

NON-ROTATING PISTON ROD TYPECOMPACT CUBIC MOUNTCYLINDERQ1○U Series

● Supporting type/Head side mount type● Switch/K type switch（reed type, proximity type）mountable.●Cushion/Rubber cushion

Series

X1○1

X1○0

X1○2






Double acting

φ12φ16φ20φ25φ32φ40φ50φ12φ16φ20φ25φ32φ40φ50φ12φ16φ20φ25φ32φ40φ50φ63φ80φ100φ125φ140φ160

5、10、15、20、25、30

5、10、15、20、25、30、35、40、45、5010、15、20、25、30、35、40、45、50

5、10

10、20

5、10、15、20、25、30

5、10、15、20、25、30、3540、45、50、55、60、65、70

5、10、15、20、25、30、35、40、4550、55、60、65、70、75、80、90、100

10、15、20、25、30、35、40、45、5055、60、65、70、75、80、90、100

10、20、30、40、50、75、100、125150、175、200、250、300

5、10、15、20 0.2～1

0.18～1

0.12～1

0.2～1

0.18～1

0.12～1

0.1～1

0.05～1

FLAT CYLINDERX1 SeriesSlim and space-saving designsuitable for clamping work.

● Rod end screw/Female screw（Standard）, Male screw●Mounting/Nose, Both sides tap, Foot, Flange, Female clevis and Male clevis mounting● Switch/ZE, AX, AZ type switch（reed type, proximity type）mountable.●Cushion/Rubber cushion

16

Series

X1○7




Double acting

φ12φ16φ20φ25φ32φ40φ50φ63φ80φ100φ125φ140φ160

5、10、15、20、25

5、10、15、20、25、30

5、10、15、20、25、30、35、40、45、50

10、15、20、25、30、35、40、45、50

10、20、30、40、50、75、100、125150、175、200、250、300

0.1～1

0.05～1

FLAT CYLINDERDOUBLE ROD TYPEX1○7 Series

● Rod end serew/Female screw（Standard）, Male screw●Mounting/Nose, Both sides tap, Foot and Flange mounting● Switch/ZE, AX type switch（reed type, proximity type）mountable.●Cushion/Rubber cushion

CUSTOM MADECYLINDER

Acting


Bore size（mm）

Double actingφ20、φ25、φ32、φ40φ50、φ63、φ80、φ100φ20～φ50：0.1～1φ63～φ100：0.05～1

Non-rotating piston rod Flat CylinderX1○U2

Acting


Bore size（mm）

Double actingφ12、φ16、φ20、φ25、φ32φ40、φ50、φ63、φ80、φ100

φ12～φ32：0.1～7φ40～φ100：0.05～0.7

Flat Cylinder with hollow rodX1○RPThe hollow piston rod allows the passage of airpressure, etc.

Acting


Bore size（mm）


φ12～φ32：0.1～1φ40～φ100：0.05～1

Dual stroke Flat CylinderX1○D2This cylinder consists of two cylinders connectedin series and united as one unit. The stroke iscontrolled in two steps.

Acting


Bore size（mm）


φ12～φ32：0.1～1φ40～φ100：0.05～1

Dual stroke Flat CylinderX1○D7This cylinder consists of two cylinders connectedon both head cover sides from one unit. Thestroke is controlled in tree steps.

Acting


Bore size（mm）


φ12～φ32：0.1～1φ40～φ100：0.05～1

Adjustable stroke Flat CylinderX1○A7On the end where the rod is extended, the strokeis adjustable with a stopper within a range of 0 to10 mm.

Acting


Bore size（mm）


φ12～φ32：0.1～1φ40～φ100：0.05～1

Adjustable stroke Flat CylinderX1○A2On the rod retracted end, the stroke is adjustablewith a adjustable bolt within a range of 0 to 10 mm.

17

Series

J1○HA2




Double acting

φ20

φ25

φ32

φ40

15、25、30、50、75、100125、150、175、200

15、25、30、50、75、100125、150、175、200、250、300

15、25、30、50、75、100、125、150175、200、250、300、350、400

15、25、30、50、75、100、125、150、175200、250、300、350、400、450、500

0.2～0.7

HI-PAL CYLINDERJ1○HA SeriesValve combined cylinder.

●Mounting/Nose, Foot, Flange and Trunion mounting● Switch/AX, SR, ZC type switch（reed type, proximity type）mountable.●Cushion/Rubber cushion（Standard）● Specific type/Bellows

Series

K1○HA2




Double acting

φ40φ50φ63φ80φ100

100、125、150、200、250300、350、400、450、500

0.2～0.8

HI-PAL CYLINDERK1○HA SeriesValve combined cylinder.


Series

J1○L2




Double acting

φ20

φ25

φ32

φ40

15、25、30、50、75、100125、150、175、200

15、25、30、50、75、100125、150、175、200、250、300

15、25、30、50、75、100、125、150175、200、250、300、350、400

15、25、30、50、75、100、125、150、175200、250、300、350、400、450、500

0.2～1

MINIATURE CYLINDERWITH LOCK MECHANISMJ1○L SeriesBuilt-in drop prevention anddesigned to lock at stroke end.

●Mounting/Nose, Foot, Flange and Trunion mounting● Switch/AX, SR, ZC type switch（reed type, proximity type）mountable.●Cushion/Rubber cushion（Standard）● Specific type/Bellows

Series

K1○L2




Double acting

φ40φ50φ63φ80φ100

1000

15000.15～1

AIR CYLINDERWITH LOCK MECHANISMK1○L SeriesBuilt-in drop prevention anddesigned to lock at stroke end.


SeriesCylinder HI-ROTOR

HA-25HA-32HA-40


Standard stroke（mm） Oscillation angle Output torque

（N･cm）


Double actingφ25φ32φ40

25、50、75、100 90˚、180˚95.1

161.8337.3

0.3～0.7

HYBRID-ARM EXCELHA SeriesCombination of cylinder and HI-ROTOR realizes linear andoscillation motion with 0.8 degreebacklash.

●Mounting/Through holes（Standard）, Flange mounting● Switch/Cylinder：M type switch（reed type, proximity type）mountable.

HI-ROTOR：Proximity switch unit mountable.●Cushion/Cylinder：Rubber custion（φ20,φ25）, Air cushion（φ32,φ40）（Note）Output torque is the value at 0.5 MPa.

18

Model No.

SA-0805AA1SA-0805AA2SA-1005AA1SA-1005AA2SA-1008AA1SA-1008AA2SA-1210AA1SA-1210AA2SA-1412AC1SA-1412AC2SA-1008BB1SA-1210BB1SA-1410BB1SA-1612BB1SA-2016BB1SA-2530BB1SA-2540BB1SA-2725BB1SA-1008CC1SA-1210CC1SA-1410CC1SA-1612CC1SA-2016CC1SA-2530CC1SA-2540CC1SA-2725CC1SA-3035CC1SA-3650CC1SA-4250CC1SA-4280CC1SA-1008CD1SA-1210CD1SA-1410CD1SA-1612CD1SA-2016CD1SA-2530CD1SA-2540CD1SA-2725CD1SA-3035CD1SA-3650CD1SA-4250CD1SA-4280CD1SAE-2010SAE-3020SAR-1415AC1SAR-1415AC2

Adjustment Stroke absorption（mm）

Max. absorbed energy（J） Option

Fixed type

Analogadjustingtype

Analogfine adjustingtype

Analogfine adjustingtype

Fixed type

Fixed type

5

5

8

10

12

8101012163040258

10101216304025355050808

101012163040253550508010201515

0.3920.6860.6860.980.981.471.962.453.925.881.472.943.929.8

29.44963.779.41.474.95.889.8

29.44963.779.4

196392441720

1.764.95.889.8

29.44963.779.4

19639244172019.69811.7619.6

Max. collision speed（m/s）

1

1

1

1

1.5

121.5211113333333333332222222222222222

Stopper nutDeflection angleadapter





Stopper nut


───

───

───

Stopper nut

Stopper nut

Stopper nut

Stopper nutDeflection angle adapter

SHOCK ABSORBERSA,SAE SeriesCompact design and large absorbingcapacity. Various types are availableaccording to your load and speedrequirements.

● SA：Spring return SAE：For emergency purpose SAR：Air return

Model No.

FCM3-0.5FCM4-0.7FCM5-0.8FCM6-1FCM8-1.25FCM10-1.25FCM10-1.5FCM12A-1.25FCM12A-1.5FCM14A-1.5FCM18A-1.5FCM22A-1.5FCM26A-1.5FCM30-1.5FCM40-1.5FCM45-1.5

Applicable cylinder bore size Oscillation angle Allowable eccentricity（mm） Mounting

Z3φ6、Q1φ6Z3φ10、Q1φ10Z3φ16、Q1φ16

Q1φ20J1φ20、Q1φ25K1φ32、Q1φ32

J1φ25J1φ32

JGBCφ40J1φ40、K1φ40

J1φ50、φ63、K1φ50、φ63K1φ80K1φ100

K1φ125、A1φ125、φ140A1φ160、φ180

A1φ200

±5˚

0.5

0.75

1.01.52.0

3.0

4.0

Direct mounting

Dirct mountingFlange mounting

Foot mounting

FLOAT COUPLERFC SeriesAbsorbs inclination and eccentricitybetween cylinder and piston rodand aligns shaft center.

19

Model No.

GPR1AGPR3AGPR10A

Acting Gripping force（N）

Max.stroke（mm）


Double acting17.733.372.5

101420

0.3～0.60.2～0.6

PARALLEL GRIPPERGPR,SeriesHI-ROTOR generates stronggripping force and large stroke.

●Mounting/Through holes and Tap mounting● Switch/PA type switch（proximity type）mountable.（Note）Gripping force is the value at 0.5 MPa

Model No.

GTS5SGTS2O


Max.stroke（mm）


Double acting45

1372024

0.3～0.6

GRIP & ROTATEDPARALLEL GRIPPERGTS SeriesCombing gripping with rotatemotion. Rotate angle is adjustableby external stopper.

●Mounting/Tap and Flange mounting● Switch/PB type switch（proximity type）mountable.（Note）Gripping force is the value at 0.5 MPa

Model No.

GPCR-10CGPCR-16CGPCR-20CGPCR-25CGPCR-10AGPCR-16AGPCR-20AGPCR-25A


Max.stroke（mm）


Double acting

Normally opensingle acting

9.425.545.7674.9

2136.454

48

121448

1214

0.18～0.70.12～0.7

0.1～0.7

0.35～0.7

0.25～0.7

PARALLEL GRIPPERWITH CROSS ROLLERGPCR SeriesHigh degree of gripping accuracyand rigidity.Dustproof cover and adaptor

●Mounting/Through holes, Tap and Mounting adapter● Switch/ZE type switch（proximity type）mountable.（Note）Gripping force is the value at 0.5 MPa

Model No.

GPCL-8CGPCL-10CGPCL-16CGPCL-20CGPCL-32CGPCL-50CGPCL-8AGPCL-10AGPCL-16AGPCL-20A


Max.stroke（mm）


Double acting


5.789.4

2645

157.8347.9

4.16.8

2034

46.5

1014223646.5

1014

0.22～0.70.2～0.70.12～0.7

0.1～0.7

0.4～0.70.35～0.7

0.25～0.7

PARALLEL GRIPPERWITH LINEAR GUIDEGPCL SeriesHigh degree of repeatability：±0.01 mm or lessHigh degree of centering accuracy：±0.07 mm or less


Model No.

GPDL-8GPDL-12GPDL-14GPDL-18


Max.stroke（mm）


Double acting

16.74458.8

107.8

1622

30、6040、80

0.2～0.7

0.15～0.7

EXTREMELY THIN PARALLELGRIPPER WITH LINEAR GUIDEGPDL SeriesHigh degree of gripping accuracyand rigiclity.Adjustable stroke in both openingand closing directions. ●Mounting/Through holes and Tap mounting

● Switch/ZE type switch（proximity type）mountable.（Note）Gripping force is the value at 0.5 MPa

20

Model No.

GPEL-8JAGPEL-8JBGPEL-12JAGPEL-12JB


Max.stroke（mm）


Double acting16.8

44.2

16

22

0.2～0.7

0.15～0.7

ASYNCHRONOUS TYPEPARALLEL GRIPPERWITH LINEAR GUIDEGPEL SeriesAsynchronous type designed togrip work based on the stopposition of the single side finger.The stop position of the singleside finger can be easily adjustedwith a screw.

●Mounting/Tap mounting● Switch/ZE type switch（proximity type）mountable.（Note）Gripping force is the value at 0.5 MPa

Model No.

GPK-12GPK-16GPK-20GPK-25


Max.stroke（mm）


Double acting

27.852.282.1

143.3

24324050

0.2～0.7

CRAB TYPE PARALLELGRIPPERGPK SeriesHigh gripping force and high rigidity.Long gripping stroke, lightweightand compact body.

●Mounting/Through holes and Tap mounting● Switch/ZE type switch（proximity type）mountable.（Note）Gripping force is the value at 0.5 MPa

Model No.

GVH-12GVH-16GVH-20GVH-25


Max.stroke（mm）


Double acting

0.71.83.27.3

－6～＋180 0.2～0.7

ROTATING GRIPPER WITH180° FINGER OPENINGGVH SeriesHigh gripping force and high degreeof gripping accuracy.Finger opening angle of 180°


Model No.

GVC-8CGVC-10CGVC-16CGVC-20CGVC-25CGVC-8AGVC-10AGVC-16AGVC-20AGVC-25A


Max.stroke（mm）


Double acting


22.5

12.824481.41.4

101838

－10～＋30

0.22～0.7

0.1～0.7

0.36～0.70.3～0.7

0.2～0.7

ROTATING GRIPPERGVC SeriesThe finger is made of chromiummolybdenum steel and the mainpart is hardened, assuring longservice.


21

Model No.

GPML-8-LGPML-8-MGPML-10-LGPML-10-MGPML-16-LGPML-16-MGPML-20-LGPML-20-M


Max.stroke（mm）

Single acting

1.62.53.44.54.46.46.58.3

4.0

6.5

10

14

MECHANICAL TYPEPARALLEL GRIPPERWITH LINEAR GUIDEGPML Series・Mechanical type without air line.・Gripping by spring force.

Outside dia gripping by spring force.Selecting spring force by work.

・External force is used for opening.・High accuracy, long life.

Model No.

GPM-10-LGPM-10-MGPM-16-LGPM-16-MGPM-20-LGPM-20-M


Max.stroke（mm）

Single acting

3.44.54.46.46.58.3

4

8

12

MECHANICAL TYPEPARALLEL GRIPPERGPM Series・Mechanical type without air line.・Variation of spring tension.・Using external force for operation.・NC/NO type

Model No.

VA01PSV23

VA01PSP23

Mounting Port Solenoid Positions Port size Flow rate(R/min(ANR))

Sub-basemountingSub-basemounting

3

3

Single

Single

2

2

M5

M5

22(at–100kPa)

40(at0.5MPa)

SOLENOID VALVEFOR VACUUMVA01 SeriesMost suitable for vacuum andvacuum break control・Compact and lightweight・Minimized vacuum leak・Quick response time・Mountable on manifold・Usable for air blow

Direct Operate/Rubber Seal/Poppet

● Voltage/DC24V●Wiring/Lead wire, Connector with lead wire

Model No.

VA01RDP33

VA01PEP34

Mounting Port Solenoid Positions Port size Flow rate(R/min(ANR))

In-linemountingSub-basemounting

3

4

Double

Double

3

3

M5

M5

10 (at–90kPa)8 (at 0.2MPa)

10 (at–100kPa)8 (at 0.5MPa)

SOLENOID VALVEFOR VACUUMVA01 SeriesMost suitable for attraction andconveyance of very small work・Lightweight and compact・One unit works for both

Vacuum control and vacuumBreak controls.・Quick response time・Throttle valve for vacuum

Break flow control・Atmospheric release mechanism・Manifolding


● Voltage/DC24V●Wiring/Lead wire (VA01RDP33 only), Connector with lead wire

22

Model No.

KPV

Port size Degree of attainable vacuum（kPa）

Operating pressure range（MPa）

Port V：M5、Rc¹⁄₈

Port P、VP：Rc¹⁄₈－93.3 0.3～0.5

MULTI-FUNCTIONVACUUM UNITKPV SeriesMost suitable for conveyorsystems using vacuum pumps. ● Voltage/DC12, 24V AC100, 200V（50/60Hz）

●Wiring/Plug-in connector

Model No.

KEV-□05HKEV-□07HKEV-□10HKEV-□05LKEV-□07L

Port size Degree of attainable vacuum（kPa）

Operating pressure range（MPa）

Port P：Rc¹⁄₈

Port V：M5

－86.6

－53.3

0.15～0.6

VACUUM UNITWITH BUILT-IN EJECTORKEV SeriesEjector, evacuator control valve,vacuum release valve, vacuumfilter, vacuum sensor and silencerare united into one body.

● Voltage/DC12, 24V AC100, 200V（50/60Hz）●Wiring/Plug-in connector

Model No.

NAPFNAPUNAPJNAPAPFPU

Buffer function Pad type

Spring type

Fixed type

Standard padGooseneck pad

Bellows padThin pad

Standard padGooseneck pad

Pad diameter（mm）

φ2～φ200φ10～φ200φ6～φ80φ10～φ50φ2～φ200φ10～φ200

VACUUM PADVacuum pad is a device forgripping workpiece directly byvacuum（sucking force）and iswidely used for conveyingworkpiece.

● Pad material/Nitril rubber, silicon rubber, Urethane rubber and Fluoric rubber

Model No.

MVS-030ABMVS-035GMVS-070PMVS-SGNMVS-SCNMPS-V2CMPS-R2C

Pressure setting range（kPa）

Power supply voltage（V） Output

－10.1～－101.2－2.7～－101.20～－999hPa

－4 or less～18±2（Differential pressure）

－101～0－101～500

DC12～24

DC10.8～30

NPN open collectoroutput：1 point

NPN open collectoroutput：2 points

VACUUM SENSORChoose optional type from amongwide variations to meet yourapplication.

23

Directional Control Valves

3･4 PORT MINIATURESOLENOID VALVESS Series Model No.

SS23FSS23JSS231

Type Port Positions Port size Effective area（mm2）


Direct 3 2M3M5

M5、Rc¹⁄₈

0.10.350.6

0～0.70～0.80～1

● Voltage/DC12, 24───SS23FAC100/110, 200/220V（50/60Hz）, DC12, 24V───SS23JAC100/110, 200/220V（50/60Hz）, DC24V───SS231

●Wiring/Lead wire, Connector with lead wire───SS23F, SS23JLead wire, Terminal grommet, Termminal conduit───SS231

Poppet

4 PORT MINIATURESOLENOID VALVEPC1B, RC1B SeriesCompact design with 10mm width,Latch type double solenoid.Low vacuum applicable.

Model No.

PCS241BPCL241BRCS241BRCL241B

Mounting Solenoid Positions Port size Effective area（mm2）


Sub-basemounting

In-linemounting

SingleLatch type

SingleLatch type

2M5

M31.0 －0.1～0.8

● Voltage/DC12, 24V●Wiring/Lead wire, Connector with lead wire


24

3･5 PORT MINIATURESOLENOID VALVEPC2,RC2 SeriesCompact design with 10mm width.Low power consumption of 0.5W.

Pilot Operate/Rubber Seal

Model No.

PCC232PCO232PCS242PCD242PCD342PCE342PCO342RCC232RCO232RCS242RCD242RCD342RCE342RCO342

Mounting Port Positions Port size Effective area（mm2）


Sub-basemounting

In-linemounting

3

5

3

5

Solenoid

Single

Double

Single

Double

2･NC2･NO

2

3･Closed center3･Exhaust center3･Pressure center

2･NC2･NO

2


M5

M3

1.8

0.8

2

0.8

0.4

0.2～0.7

0.2～0.7

0.4

● Voltage/DC12, 24V●Wiring/Lead wire, Connector with lead wire

3･5 PORTSOLENOID VALVEPC5,RC5 SeriesCompact design with 15mm width.Flap type solenoid is mounted toassure long service life.


Model No.

PCC235PCO235PCS245PCD245PCD345PCE345PCO345RCC235RCO235RCS245RCD245RCD345RCE345RCO345



Sub-basemounting

In-linemounting

3

5

3

5

Solenoid

Single

Double

Single

Double

2･NC2･NO

2


2･NC2･NO

2


M5Rc¹⁄₈

M5

3.7（M5）4（Rc¹⁄₈）

2.2（M5）2.5（Rc¹⁄₈）

4

2.2

0.2～0.80.2～0.7

（0.5W type）

0.2～0.80.2～0.7

（0.5W type）

● Voltage/AC100/110, 200/220V（50/60Hz）, DC12, 24V───Standard typeDC24V───0.5W type

●Wiring/Lead wire, Connector with lead wire

5 PORTSOLENOID VALVEPC13,RC13 SeriesCompact design with 18mm width.Flap type solenoid is mounted toassure long service life.


Model No.

PCS2413PCD2413PCD3413PCE3413PCO3413RCS2413RCD2413RCD3413RCE3413RCO3413

Mounting Port Positions Effective area（mm2）


Sub-basemounting

In-linemounting

5

5

Solenoid

Single

Double

Single

Double

2


2


Rc¹⁄₄

Rc¹⁄₈

12

7.5

5

12.5

8

5● Voltage/AC100/110, 200/220V（50/60Hz）, DC12, 24V───Standard type

DC24V───0.5W type●Wiring/Lead wire, Connector with lead wire

0.2～0.80.2～0.7

（0.5W type）

0.2～0.80.2～0.7

（0.5W type）

25

4･5 PORTLATCHED TYPESOLENOID VALVE

Rubber seal

Model No.

PCL245PCL2413RCL245RCL2413

Mounting Port Position Port size Effective area（mm2）


Sub-baseIn-line

5

Solenoid

Latched type 2

M5、Rc¹⁄₈

Rc¹⁄₄

M5Rc¹⁄₈

3.5（M5）3.8（Rc¹⁄₈）

123.7

12.5

0.2～0.7

● Voltage/DC24●Wiring/Lead wire, connector with lead wire

5 PORTSOLENOID VALVEPC06,RC06 Series


Model No.




Sub-basemounting

In-linemounting

5

5

Solenoid

Single

Double

Single

Double

2


2


Rc¹⁄₄

Rc¹⁄₄

10

11

12

90.2～0.8

0.2～0.8

● Voltage/AC100/110, 200/220V（50/60Hz）, DC24V●Wiring/Lead wire, Terminal grommet, Terminal conduit, DIN connector

5 PORTSOLENOID VALVEPC08,RC08 Series


Model No.




Sub-basemounting

In-linemounting

5

5

Solenoid

Single

Double

Single

Double

2


2


Rc³⁄₈

Rc³⁄₈

30

25

14

0.2～0.8

0.2～0.8

30

25

14● Voltage/AC100/110, 200/220V（50 60Hz）, DC24V●Wiring/Lead wire, Terminal grommet, Terminal conduit, DIN connector

5 PORTSOLENOID VALVEPC15 Series


Model No.

PCS2415PCD2415PCD3415PCE3415PCO3415

Mounting Port Position Port size Effective area（mm2）


Sub-basemounting

5

Solenoid

Single

Single

2


Rc¹⁄₂

70

60

0.2～0.8

0.25～0.8


26

3 PORT MINITURESOLENOID VALVEA00 Series

Direct Operate/Poppet

Model No.

A00SC23A00SC23JA00SO23A00SO23J

Mounting Port Port size Effective area（mm2）


Sub-basemounting

3

Positions

2･NC

2･NOM3

0.140.220.140.22

0～0.7

0～0.5

● Voltage/DC24, 12, 5V AC100/110V（50/60Hz）AC200/220V version of AC100/110V with voltage convertor respectively.

●Wiring/Plug-in connector

®

5 PORTSOLENOID VALVEA05,12,20 SeriesBody width remains the same, butthe flow rate 1.5 to 3 times morethan conventional valves.


Model No.

A05PS25A05PD25A05PD35A05PE35A05PO35A05RS25A05RD25A05RD35A05RE35A05RO35A12PS25A12PD25A12PD35A12PE35A12PO35A12RS25A12RD25A12RD35A12RE35A12RO35A20PS25A20PD25A20PD35A20PE35A20PO35A20RS25A20RD25A20RD35A20RE35A20RO35



Sub-basemounting

In-linemounting

Sub-basemounting

In-linemounting

Sub-basemounting

In-linemounting

5

5

5

5

5

5

Solenoid

Single

Double

Single

Single

Single

Single

Single

Double

Double

Double

Double

Double

2


2

2

2

2

2






Rc¹⁄₈

M5、C4、C6

Rc¹⁄₄

Rc¹⁄₈、C6、C8

Rc¹⁄₄、³⁄₈

Rc¹⁄₄、C8、C10

0.15～0.70.1～0.7

0.2～0.7

0.15～0.70.1～0.7

0.2～0.7

0.15～0.70.1～0.7

0.2～0.7

0.15～0.70.1～0.7

0.2～0.7

0.15～0.70.1～0.7

0.2～0.7

0.15～0.70.1～0.7

0.2～0.7

5.8

4.5

4

3.7

11.1

7.6

8.8

8.5

20.6

15.9

17.6

15.7

6.7

4.5

14.1

12

20.5

18.1● Voltage/DC24, 12, 5V AC100/110V（50/60Hz）

AC200/220V version of AC100/110V with voltage convertor respectively.●Wiring/Plug-in connector

27


Model No.

A05GS25A05GD25A05GD35A05GE35A05GO35A05FS25A05FD25A05FD35A05FE35A05FO35A12GS25A12GD25A12GD35A12GE35A12GO35A12FS25A12FD25A12FD35A12FE35A12FO35A20GS25A20GD25A20GD35A20GE35A20GO35A20FS25A20FD25A20FD35A20FE35A20FO35A05ES25A05ED25A05ED35A05EE35A05EO35A12ES25A12ED25A12ED35A12EE35A12EO35



Sub-basemounting

In-linemounting

Sub-basemounting

In-linemounting

Sub-basemounting

In-linemounting

UNI-WIREmanifoldmounting

UNI-WIREmanifoldmounting

───

───

5

5

5

5

5

5

5

5

Solenoid

Single

Double

Single

Single

Single

Single

Single

Single

Single

Double

Double

Double

Double

Double

Double

Double

2


2

2

2

2

2

2

2








Rc¹⁄₈

M5、C4、C6

Rc¹⁄₄

Rc¹⁄₈、C6、C8

Rc¹⁄₄、³⁄₈

Rc¹⁄₄、C8、C10

0.15～0.70.1～0.7

0.2～0.7

0.15～0.70.1～0.7

0.2～0.7

0.15～0.70.1～0.7

0.2～0.7

0.15～0.70.1～0.7

0.2～0.7

0.15～0.70.1～0.7

0.2～0.7

0.15～0.70.1～0.7

0.2～0.7

0.15～0.70.1～0.7

0.2～0.7

0.15～0.70.1～0.7

0.2～0.7

5.8

4.5

4

3.7

11.1

7.6

8.8

8.5

20.6

15.9

17.6

15.7

5.8

4.5

11.1

7.6

6.7

4.5

14.1

12

20.5

18.1

6.7

14.1● Voltage/A※※G, A※※F：DC24, 12, 5V A※※E：DC24V●Wiring/Plug-in connector

28

5 PORTSOLENOID VALVEK20 SeriesReliable design combination oflapped sleeve & spool and flappertype pilot operator.Excellent for critical applicationwith high protection grade of IP65,flame resistance plastic materialenvelop and standard groundterminal connection.High pressure model up to 1.6 MPasupply pressure available.

Pilot Operate/Metal Seal

Model No.

K20GS25K20GO25K20GD35K20GE35K20GO35K20PS25K20PO25K20PD35K20PE35K20PO35K20RS25K20RO25K20RD35K20RE35K20RO35



Manifoldmounting

In-linemounting

Sub-basemounting

5

5

5

Solenoid

Single

Double

Single

Single

Double

Double

2


2

2



───

Rc¹⁄₄

G¹⁄₄

Rc¹⁄₄

G¹⁄₄

0.15～0.8

0.15～0.8

0.15～0.8

18

18

15

● Voltage/AC100/110V, 200/220V（50/60Hz）, DC24V●Wiring/Plug-in, DIN connector

K20 SERIES MANIFOLDThe 5 basic manifold models meet broad range of applications.In terms of wiring, individual, integrated connector and serial interface（UNI-WIRE）come with IP65 protection grade.Common auxiliary pilot version（except MFU manifold）is available.

3･5 PORTSOLENOID VALVEPM SeriesMain valve is of sleeve spool typewith metal seal.Interface between sub-base andbody is common to direct actingtype solenoid valve A series.

Pilot Operate/Metal Seal/Sub-base Mounting

Model No.

PMS246PMD246PMD346PME346PMS2306PMS2406PMD2406PMD3406PME3406PMS2308PMS2408PMD2408PMD3408PME3408PMS2310PMS2410PMD2410PMD3410PME3410PMS2315PMS2415PMD2415PMD3415PME3415PMS2325PMS2425PMD2425PMD3425PME3425

Port Positions Port size Effective area（mm2）


5

5

5

5

5

5

3

3

3

3

3

Solenoid

Single

Single

Single

Single

Single

Single

Double

Double

Double

Double

Double

Double

2

2

2

2

2

2

3･Closed center3･Exhaust center






Rc¹⁄₈、¹⁄₄

Rc¹⁄₄、³⁄₈

Rc³⁄₈、¹⁄₂

Rc¹⁄₂、³⁄₄

Rc³⁄₄、1

Rc³⁄₄、1

Rc¹⁄₈ 6.5

11

22

38

80

190

12.5

12

30

25

50

75

170（Rc³⁄₄）200（Rc1）

165（Rc³⁄₄）190（Rc1）

0.15～1

0.2～0.8

0.2～0.8

0.2～0.8

0.2～0.8

0.2～0.8

0.2～0.7

0.2～0.7

0.2～0.7

0.2～0.7

0.2～0.7


29

3･5 PORTSOLENOID VALVEA SeriesMain valve is of sleeve spool typewith metal seal.Heavy duty type solenoid valvemade of aluminium alloy.Usable in low vaccum application.

Direct Operate/Metal Seal/Sub-base Mounting

Model No.

AS2306AS2406AD2406AD3406ADE3406AS2308AS2408AD2408AD3408ADE3408AS2310AS2410AD2410AD3410ADE3410AS2315AS2415AD2415AD3415ADE3415



5

5

5

5

3

3

3

3

Solenoid

Single

Single

Single

Single

Double

Double

Double

Double

2

2

2

2





Rc¹⁄₈、¹⁄₄

Rc¹⁄₄、³⁄₈

Rc¹⁄₄、³⁄₈、¹⁄₂

Rc¹⁄₂、³⁄₄

22

9

38Rc³⁄₈、¹⁄₂

80

10

9

30

25

50

75

－0.1～1

－0.1～1

－0.1～1

－0.1～1

● Voltage/AC100, 110, 200, 220V（50/60Hz）●Wiring/Lead wire conduit（06 type only）

Terminal conduit（08～15 type）

30

MANUALCONTROL VALVEMR SeriesRotary type selector valve withmetal seal.

Model No.

MR3400MR340MMR3401MR3402MR3403MRE3400MRE340MMRE3401MRE3402MRE3403



4

4

3Closed center

3Exhaust center

Rc¹⁄₈

Rc¹⁄₄

Rc³⁄₈

Rc¹⁄₂

Rc³⁄₄

Rc¹⁄₈

Rc¹⁄₄

Rc³⁄₈

Rc¹⁄₂

Rc³⁄₄

203665

110230203665

110230

0～1

0～1

Metal Seal

MICRO VALVECompact hand-operated valveand mechanical operated valvesuitable for sequence controlsignals.

Actuator

Roller leverPush buttonToggle

Model No. Port Port size Orifice（mm）

Prassure range（MPa）

MMS232A-RLHMS232A-PHMH232A-T

3 M5 φ2 0～1

Metal Seal

Actuator

Adjustment rod

Rolleradjustment

Roller arm

Roller plunger

Plunger

Model No. Port Port size Effective area（mm2）


MSV2306-VRMSV2406-VRMSV2306-VAMSV2406-VAMSV2306-RAMSV2406-RAMSV2306-RPMSV2406-RPMSV2306-PGMSV2406-PG

3535353535

Rc¹⁄₈、¹⁄₄10（Rc¹⁄₈）11（Rc¹⁄₄）

0～1

MANUAL VALVEM SeriesHand-operated valve with largeeffective sectional area designedfor direct control of actuator.

Actuator

Selector

Long leverselector

Flat type push buttonMedium-sizeflat typepush buttonLarge-sizeflat typepush button

Model No. Port Port size Effective area（mm2）


HHV2306-SHHV2406-SHHV2306-SLHHV2406-SLHSV2306-FHSV2406-FHSV2306-MHSV2406-MHSV2306-LHSV2406-L

3535353535

Rc¹⁄₈、¹⁄₄10（Rc¹⁄₈）11（Rc¹⁄₄）

0～1

Metal Seal/In-line Mounting

MECHANICAL VALVEM SeriesMechanical valve with largeeffective sectional area.Direct control of actuator at fixedsequence is possible.


31

3･5 PORTAIR OPERATED VALVEVC Series

Rubber Seal/Sub-base mounting

Model No.

VCC232VCO232VCS242VCD242VCD342VCE342VCO342VCC235VCO235VCS245VCD245VCD345VCE345VCO345VCS2413VCD2413VCD3413VCE3413VCO3413VCS2408VCD2408VCD3408VCE3408VCO3408VCS2415VCD2415VCD3415VCE3415VCO3415

Port Position Port size Effective area（mm2）


Pilot pressure（MPa）

3

5

3

5

5

5

5

2

2･NC2･NO

2･NC2･NO


2


M5

M5、Rc¹⁄₈

Rc¹⁄₄

Rc³⁄₈

Rc¹⁄₂

1.8

0.8

3.7（M5）4（Rc¹⁄₈）

2.2（M5）2.5（Rc¹⁄₈）

12

30

70

7.5

25

60

0.2～0.7

0.2～0.7

0.2～0.8

0.2～0.8

0.2～0.8

0.2～0.8

0.25～0.8

0.2～0.8

0～0.7

0～0.8

0.2～0.8

0～0.8

0～0.8

0～0.8

2

2

2




3･5 PORTAIR OPERATED VALVEYC Series

Rubber Seal/In-line mounting

Model No.

YCC232YCO232YCS242YCD242YCD342YCE342YCO342YCC235YCO235YCS245YCD245YCD345YCE345YCO345YCS2413YCD2413YCD3413YCE3413YCO3413

Port Position Port size Effective area（mm2）



3

5

3

5

2


2

2･NC2･NO

2･NC2･NO


M5

M5、Rc¹⁄₈

Rc¹⁄₈

1.8

0.8

4

2.2

12.5

8

0.2～0.7

0.2～0.7

0.2～0.8

0.2～0.8

0.2～0.8

0～0.7

0～0.8

0.2～0.8

0～0.8

2


32

5 PORTAIR OPELATED VALVEVM Series

Metal Seal/Sub-base Mounting

Model No.

VMS246VMD246VMD346VME346VMS2406VMD2406VMD3406VME3406VMS2408VMD2408VMD3408VME3408VMS2410VMD2410VMD3410VME3410VMS2415VMD2415VMD3415VME3415VMS2425VMD2425VMD3425VME3425




5

5

5

5

5

5

2

2

2

2

2

2







Rc¹⁄₈

Rc¹⁄₈、¹⁄₄

Rc¹⁄₄、³⁄₈

Rc³⁄₈、¹⁄₂

Rc¹⁄₂、³⁄₄

Rc³⁄₄、1

12.5

6.5 －0.1～1

－0.1～1

－0.1～1

－0.1～1

－0.1～1

－0.1～1

12

30

25

50

75

0.15～1

0.2～0.8

0.2～0.8

0.2～0.8

0.2～0.8

0.2～0.8

3･5 PORTAIR OPERATED VALVEV Series Model No.

VS2306VP2306VS2406VP2406VS2410VP2410



3

5

5

2

2

Rc¹⁄₈、¹⁄₄

Rc¹⁄₄、³⁄₈、¹⁄₂

10（Rc¹⁄₈）11（Rc¹⁄₄）

40

－0.1～1

－0.1～1


0.15～1

0.15～1


170（Rc³⁄₄）200（Rc1）

165（Rc³⁄₄）190（Rc1）

33

Other Equipment

SPEED CONTROLLERWITH PUSH-IN FITTINGFor nylon and polyurethane tubes.Sealant is coated on threadedportion, eliminating need forsealing tape.

Model No.Universal type Elbow type

MB4R-M3MB4R-M5MB4R-01MB6R-M5MB6R-01B6R-M5SCB6R-01SCB6R-02SCB8R-01SCB8R-02SCB8R-03SCB10R-02SCB10R-03SCB10R-04SCB12R-03SCB12R-04SC

M4R-M3M4R-M5M4R-01M6R-M5M6R-016R-M5SC6R-01SC6R-02SC8R-01SC8R-02SC8R-03SC10R-02SC10R-03SC10R-04SC12R-03SC12R-04SC

Screw size Applicable tube No. Pressure range（MPa）

M3M5

Rc¹⁄₈

M5Rc¹⁄₈

M5Rc¹⁄₈

Rc¹⁄₄

Rc¹⁄₈

Rc¹⁄₄

Rc³⁄₈

Rc¹⁄₄

Rc³⁄₈

Rc¹⁄₂

Rc³⁄₈

Rc¹⁄₂

TP-4、TN-4

TP-6、TN-6

TP-8、TN-8

TP-10、TN-10

TP-12、TN-12

MAX.0.7

●Meter-out type and meter-in type availabe

SPEED CONTROLLEROutstanding controllabilityattainable in low flow rate region.

Model No. Type

SP-Z-M3SPER-Z-M3SPSR-Z-M3SPR-Z-M3SP-H-M5SPE-H-M5SPF-H-M5SPER-H-M5SPSR-H-M5SPR-H-M5SP-2H-1、2SPE-2H-1、2SP-06-1、2SPE-06-1、2SPE-10-3SPE-10-34SP-15-3、4、6SP-20-6、8

StraightUniversal elbow

Universal

StraightElbowFlatUniversal elbow

Universal

StraightElbowStraightElbow

Elbow

StraightStraight

Port size（Screw size）

Effective area（mm2）


M5

Rc¹⁄₈、¹⁄₄

R、Rc¹⁄₈、¹⁄₄

Rc¹⁄₈、¹⁄₄

R、Rc¹⁄₈、¹⁄₄

R、Rc³⁄₈

External R¹⁄₂、Internal Rc³⁄₈

Rc³⁄₈、¹⁄₂、³⁄₄

Rc³⁄₄、1

M3 0.4

1.0

2.7

14、179、12

3945

64、69、70155、174

0～0.8

0～1

METERING VALVE Model No. Type

MV-M5MV-1MV-2MV-3MV-4MV-6MV-8

M5R¹⁄₈

R¹⁄₄

R³⁄₈

R¹⁄₂

R³⁄₄

R1

34

AIR MUFFLER Model No.

SL-M5SL-1SL-2LSL-6SL-8AS-6AS-8AS-10AS-15

Screw size Effective area（mm2）

Exhaust noise reduction（dB）

M5R¹⁄₈

R¹⁄₄

R³⁄₄

R1R¹⁄₈

R¹⁄₄

R³⁄₈

R¹⁄₂

4123080

150164080

106

Min.20

Min.25

Min.30

CLEANUP MUFFLERRemoves exhaust noise and oilmist to prevent deterioration ofworking environment.

Model No.

CM-03CM-06CM-08

Port size Max.flow（m3/min（ANR））


Rc³⁄₈

Rc³⁄₄

Rc1

45016003000

0～1

Oil mist removal（%）

99.9

MINIATURE IN-LINEFILTER FOR VACUUM

Model No.

LF-M5ALF-M5AALF-M5SMFL-M5S

Port size Pressure range（kPa）

filter element（μm）

M5－100～0

－100～400

6040

ROTARY JOINTLiquid supply to the rotatingobjects is easy even in a highpressure or a high speed.

Model No.

RJC-061H

RJC-062L

RJH-062M

RJC-122L

RJH-122M

Port size Rated pressure（MPa）

Max.revolution（rpm）

Pass dia.（mm） Numbers of pass

Rc³⁄₈

Rc³⁄₈

Rc¹⁄₄

Rc¹⁄₄

Rc¹⁄₄

Fluid

HydraulicAir

HydraulicAir

HydraulicHydraulic

AirHydraulic

21131

1431

14

3000

3000

φ6

φ6

1

2

3000 φ6 2

2000 φ12 2

2000 φ12 2

35

Model No.

T70C3800S/511HS/513S/514

Port size Effective area（mm2）

Pressure range（MPa） Note

A port G³⁄₈、BC port G³⁄₈

A port G¹⁄₂、BC port G³⁄₄

A port G¹⁄₄、B port G³⁄₈

A port G¹⁄₂、B port G³⁄₄

A→B70 B→C101A→B73 B→C200A→B33 B→C70A→B71 B→C155

0.05～10.07～1

0.07～0.7

－

With muffler

QUICK EXHAUSTVALVE

Model No.

T65C1800T65C2800



G¹⁄₈

G¹⁄₄

7.711.8

0.07～0.98

SHUTTLE VALVE

Model No.

ST-10ST-15ST-25



Rc¹⁄₄、³⁄₈

Rc¹⁄₂

Rc³⁄₄、1

4570

1900.15～1

PERMA-STOPConnects cylinder and valve tostop cylinder halfway, preventingadverse effect by leak in valve.

Model No.

T55C1800T55C2800T55C4800TS/523TS/524



Cracking pressure（MPa）

G¹⁄₈

G¹⁄₄

G¹⁄₂

G³⁄₄

G1

141890

195317

0.01～1

0.07～1

0.005

0.03

CHECK VALVE

36

Type

Male connector

Female connector

Male elbow

Long male elbow

Male branch tee

Male run tee

UnionUnion elbowUnion teeBulk head union

Model ConnectionApplicable tube 0.D.φ4 φ6 φ8 φ10 φ12

M

○○○

○○

○○○

○○

○○○

○○○

○○○○

○○○○

○○○

○○○○

○○

○○○○

○○○○

○○○○

○○○

○○

○○○

○○○

○○○

○○○

○○○○

○○○○

○○○

○○○○

○○○

○○○○

○○○○○○○○

○○○

○○○

○○○

○○○

○○○

○○○○○○○

M5R¹⁄₈

R¹⁄₄

R³⁄₈

R¹⁄₂

F

R¹⁄₈

R¹⁄₄

R³⁄₈

R¹⁄₂

ML

M5R¹⁄₈

R¹⁄₄

R³⁄₈

R¹⁄₂

M2L

R¹⁄₈

R¹⁄₄

R³⁄₈

R¹⁄₂

MT

M5R¹⁄₈

R¹⁄₄

R³⁄₈

R¹⁄₂

RT

M5R¹⁄₈

R¹⁄₄

R³⁄₈

R¹⁄₂

UULUTBU

－－－－

Type

Female bulk

Branch Y

Union Y ofdefferent dia.

Y connector

Reducer

L connector

Tee connector


FB○

○○○

○

○

○○○

○

○

○

○○○○

○○

○

○○○

○

○

○

○○○

○

○

○

○○

○

○

○

○○○○○

○

○

○

○

○

○

○○○○

○

○

○

○

R¹⁄₈

R¹⁄₄

R³⁄₈

BY

M5R¹⁄₈

R¹⁄₄

R³⁄₈

R¹⁄₂

Union Y UY －

UY

φ4φ6φ8φ10

Y

φ4φ6φ8φ10φ12

RC

φ6φ8φ10φ12

LC

φ4φ6φ8φ10φ12

TC

φ4φ6φ8φ10φ12

Type

Single banjo

Single banjo

Double banjo

Double banjo

Double banjo

Triple banjo

Triple banjo


S1

○○○

○○○

○○

○○

○○

○

○

○

○

○○○○

○○○○

○○

○○

○○

○○

○○

○○

○○

○○○

○○○

○○○

○○○

○○○

○○○

○○○

○○○

○○○

○○○○

○○○○

○○

○○

○○

○○

○○

○○

○○

○○○

○○○

○○

○○

○○

○○

○○

○○

○○

M5R¹⁄₈

R¹⁄₄

R³⁄₈

R¹⁄₂

D1

M5R¹⁄₈

R¹⁄₄

R³⁄₈

R¹⁄₂

S2

M5R¹⁄₈

R¹⁄₄

R³⁄₈

R¹⁄₂

S1D1

M5R¹⁄₈

R¹⁄₄

R³⁄₈

R¹⁄₂

D2

M5R¹⁄₈

R¹⁄₄

R³⁄₈

R¹⁄₂

S3

R¹⁄₈

R¹⁄₄

R³⁄₈

R¹⁄₂

S2D1

R¹⁄₈

R¹⁄₄

R³⁄₈

R¹⁄₂

Triple banjo S1D2

R¹⁄₈

R¹⁄₄

R³⁄₈

R¹⁄₂

Triple banjo D3

R¹⁄₈

R¹⁄₄

R³⁄₈

R¹⁄₂

PUSH-IN FITTINGFor nylon and polyurethane tubes.Sealant is coated on threadedportion, eliminating need forsealing tape.

37

MINIATURE FITTINGFor nylon and polyrethane tubes.

Type Applicable tube material

Tubenipple

Barbconnector

Barbnipple

universalbarb elbow

Barb tee

Barb joint

TN-04-M5TN-06-M5TU-04-M5TU-06-M5BC-03-M3BC-04-M3BC-03-M5BC-03-M3BC-04-M3BC-03-M5

BN-03

BE-03-M3

BT-03

BJ-03

M5

M5

M3○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

M5

M3

M5

－

M3

－

φ4

Nylon

Polyurethan

Nylon

Polyurethan

NylonPolyurethanNylonPolyurethanNylonPolyurethanNylonPolyurethan

Model No. ConnectionApplicable tube O.D.

φ3.2 φ3.5 φ4 φ6

Type Model No.

Universal elbow

Universal tee

Bushing

Nipple

Plug

Extension fittingPanel fittingTerminal

Gasket

M5M3M5

M5-M3R¹⁄₈-M5

M3M5M3M5M3M3

Rc¹⁄₈-M3For M3For M5

UE-M5UT-M3UT-M5B-M3B-M5N-M3N-M5P-M3P-M5LN-M3PJ-M3TM-M3G-M3G-M5

Connection

38

TUBE

Model O. D.（mm）

TN

○

○

○

○

○○○○○○○

○○○○○○○○

○○○○○○○

3.2

4

6

81012

I. D.（mm）

2.22.5344.567.59

Applicable fitting Length

Barbfitting

Miniaturefitting

Instantfitting 20m 100m

Nylon tube

●Color/Black, White, Yellow, Red, Green

SPIRAL TUBE Model O. D.（mm）

TPS

○○○○○

468

1012

I. D.（mm）

2456.58

Number of turns15

○○○○○

30○○○○○

45

MULTI STRAIGHT TUBE Model O. D.（mm）

MP

○○○○○

468

1012

I. D.（mm）

2456.58

Cores2

○○○○○

4○○○○○

○○○○○

6 8

Model O. D.（mm）

TP

△

○○

○

○○○○○○

○○○○○○○

○

○○○○○○

33.5

4

68

1012

I. D.（mm）

1.8222.5456.58

Applicable fitting Length

Barbfitting

Miniaturefitting

Instantfitting 20m 25m 100m

Polyurethane tube

●Color/Black, White, Yellow, Red, Green, Blue, Clear, Light green

39

Air Cleaning Equipment

Model No.

C45-01、02、03C45D-01、02、03C45W-01、02、03C45L-01、02、03C45LD-01、02、03C45LW-01、02、03C65-02、03、04C65L-02、03、04C105-04、06C105D-04、06C105W-04、06C105L-04、06C105LD-04、06C105LW-04、06C55-2、3、4C55-2、3、4DC55-2、3、4WC55-2、3、4LC55-2、3、4DLC55-2、3、4WL

Port sizeComponents

Air Filter Air Regulator Air LubricatorFilter element（μm）

Reduced pressure range（MPa） Option

Rc¹⁄₈、¹⁄₄、³⁄₈

Rc¹⁄₄、³⁄₈、¹⁄₂

Rc¹⁄₂、³⁄₄

Rc¹⁄₄、³⁄₈、¹⁄₂

F45-01、02、03F45D-01、02、03F45W-01、02、03F45-01、02、03F45D-01、02、03F45W-01、02、03

R45-01、02、03

R45L-01、02、03

R65-02、03、04R65L-02、03、04

R105-04、06

R105L-04、06

R55-2、3、4

R55-2、3、4L

F65-02、03、04

F105-04、06F105D-04、06F105W-04、06F105、04、06F105D-04、06F105W-04、06

L45-01、02、03L45D-01、02、03L45W-01、02、03L45-01、02、03L45D-01、02、03L45W-01、02、03

5（Standard）20

0.03～0.8

0.02～0.42

0.03～0.8

0.02～0.42

0.03～0.80.02～0.42

0.03～0.8

0.02～0.42 BracketManual drainOnepush drainCombination drainDrainmaster（45）Automatic drain

（65,105）

BracktPressure gaugeAutomatic drainSpring drain

55（Standard）40

55（Standard）40

L65-02、03、04

L105-04、06L105D-04、06L105W-04、06L105-04、06L105D-04、06L105W-04、06

F55-2、3、4F55-2、3、4DF55-2、3、4WF55-2、3、4F55-2、3、4DF55-2、3、4W

L55-2、3、4L55-2、3、4DL55-2、3、4WL55-2、3、4L55-2、3、4DL55-2、3、4W

QUBE SeriesAIR COMBINATIONUNITModular type FRL unit consistingof air filter, air regulator and airlubricator.

（Note）W：Metal bowl encircled with sight glassD：Metal bowl without sight glass

Model No.

U45-01、02、03U45D-01、02、03U45W-01、02、03U45L-01、02、03U45LD-01、02、03U45LW-01、02、03U65-02、03、04U65L-02、03、04U105-04、06U105D-04、06U105W-04、06U105L-04、06U105LD-04、06U105LW-04、06U55-2、3、4U55-2、3、4DU55-2、3、4WU55-2、3、4LU55-2、3、4DLU55-2、3、4WL

Port sizeComponents

Intergal Filter Regulator Air LubricatorFilter element（μm）


Rc¹⁄₈、¹⁄₄、³⁄₈

Rc¹⁄₄、³⁄₈、¹⁄₂

Rc¹⁄₂、³⁄₄

Rc¹⁄₄、³⁄₈、¹⁄₂

B45-01、02、03B45D-01、02、03B45W-01、02、03B45L-01、02、03B45LD-01、02、03B45LW-01、02、03B65-02、03、04B65L-02、03、04B105-04、06B105D-04、06B105W-04、06B105L-04、06B105LD-04、06B105LW-04、06B55-2、3、4B55-2、3、4DB55-2、3、4WB55-2、3、4LB55-2、3、4DLB55-2、3、4WL

L45-01、02、03L45D-01、02、03L45W-01、02、03L45-01、02、03L45D-01、02、03L45W-01、02、03

5（Standard）20

0.03～0.8

0.02～0.42

0.03～0.8

0.02～0.42

0.03～0.80.02～0.42

0.03～0.8

0.02～0.42BracketManual drainSpring drainOnepush drainCombination drainDrainmaster（45）Automatic drain

（65,105）

BracketPressure gaugeAutomatic drainSpring drain

55（Standard）40

55（Standard）40

L65-02、03、04

L105-04、06L105D-04、06L105W-04、06L105-04、06L105D-04、06L105W-04、06L55-2、3、4L55-2、3、4DL55-2、3、4WL55-2、3、4L55-2、3、4DL55-2、3、4W

QUBE SeriesAIR COMBINATIONUNITFRL unit consisting to integralFilter-Regulator and Air Lubricator.


40

QUBE SeriesAIR FILTERSeparates and removes waterand dust in compressed air.

Model No.

F45-01、02、03F45D-01、02、03F45W-01、02、03F65-02、03、04F105-04、06F105D-04、06F105W-04、06F55-2、3、4F55-2、3、4DF55-2、3、4W

Port size Filter element（μm） OptionBowl capacity

（cm3）

Rc¹⁄₈、¹⁄₄、³⁄₈

Rc¹⁄₄、³⁄₈、¹⁄₂

Rc¹⁄₂、³⁄₄

Rc¹⁄₄、³⁄₈、¹⁄₂

22

45

140

47

5（Standard）20

05（Standard）40

BracketManual drainSpring drainOnepush drainCombination drainDrainmaster（45）Automatic drain（65,105）

BracketAutomatic drainSpring drain

QUBE SeriesCOALESCING FILTERHigh-performance air filter capableof removing more than 99.99998%of aerosol consisting of water andoil of more than 0.01μm.

Model No.

M45-01、02、03M45D-01、02、03M45W-01、02、03M65-02、03、04M105-04、06M105D-04、06M105W-04、06M55-2、3、4M55-2、3、4DM55-2、3、4W


（cm3）

Rc¹⁄₈、¹⁄₄、³⁄₈

Rc¹⁄₄、³⁄₈、¹⁄₂

Rc¹⁄₂、³⁄₄

Rc¹⁄₄、³⁄₈、¹⁄₂

22

45

140

45

0.01



Recommeded max.flow（R/min（ANR））

250

340

750

340



QUBE SeriesSLUDGE FILTERSeparates and removes sludgeand drain produced by compressor.

Model No.

S45-01、02、03S45D-01、02、03S45W-01、02、03S65-02、03、04S105-04、06S105D-04、06S105W-04、06S55-2、3、4S55-2、3、4DS55-2、3、4W


（cm3）

Rc¹⁄₈、¹⁄₄、³⁄₈

Rc¹⁄₄、³⁄₈、¹⁄₂

Rc¹⁄₂、³⁄₄

Rc¹⁄₄、³⁄₈、¹⁄₂

22

45

100

45

0.3



Recommeded max.flow（R/min（ANR））

250

340

750

340


QUBE SeriesAIR REGULATOREasy-to-use and high-performanceregulator with one-touch lockingadjust knob.

Model No.

R45-01、02、03R45L-01、02、03R65-02、03、04R65L-02、03、04R105-04、06R105L-04、06R55-2、3、4R55-2、3、4L

Port size Max. supply pressure（MPa） OptionReduced pressure range

（MPa）

Rc¹⁄₈、¹⁄₄、³⁄₈

Rc¹⁄₄、³⁄₈、¹⁄₂

Rc¹⁄₂、³⁄₄

Rc¹⁄₄、³⁄₈、¹⁄₂

0.03～0.80.02～0.420.03～0.80.02～0.420.03～0.80.02～0.420.03～0.80.02～0.42

1

BracketPressure gaugeRing for Panel-mounting

41


QUBE SeriesAIR LUBRICATORSprays lubricating oil intocompressed air.

Model No.

L45-01、02、03L45D-01、02、03L45W-01、02、03L65-02、03、04L105-04、06L105D-04、06L105W-04、06L55-2、3、4L55-2、3、4DL55-2、3、4W

Port size Min air flow for oil dropping（R/min（ANR）） OptionBowl capacity

（cm3）

Rc¹⁄₈、¹⁄₄、³⁄₈

Rc¹⁄₄、³⁄₈、¹⁄₂

Rc¹⁄₂、³⁄₄

Rc¹⁄₄、³⁄₈、¹⁄₂

43

75

240

78

50

80

50

Bracket

QUBE SeriesINTEGRALFILTER-REGULATORCompact design with united airfilter and air regulator.

Model No.

B45-01、02、03B45D-01、02、03B45W-01、02、03B45L-01、02、03B45LD-01、02、03B45LW-01、02、03B65-02、03 04B65L-02、03、04B105-04、06B105D-04、06B105W-04、06B105L-04、06B105LD-04、06B105LW-04、06B55-2、3、4B55-2、3、4DB55-2、3、4WB55-2、3、4LB55-2、3、4DLB55-2、3、4WL

Port size Reduced pressure range（MPa） OptionFilter element

（μm）

Rc¹⁄₈、¹⁄₄、³⁄₈

Rc¹⁄₄、³⁄₈、¹⁄₂

Rc¹⁄₂、³⁄₄

Rc¹⁄₄、³⁄₈、¹⁄₂

22

047

140

47

0.03～0.8

0.02～0.42

0.03～0.80.02～0.42

0.03～0.8

0.02～0.42

0.03～0.8

0.02～0.42


BracketPressure gaugeAutomatic drainSpring drainRing for panel-monuting

Bowl capacity（cm3）

5（Standard）20

5（Standard）40

5（Standard）20


Model No.

SV35-01SV35-02SV35-03SV75-02SV75-03SV75-04SV105-04SV105-06

Port size Applicable unit

Rc¹⁄₈

Rc¹⁄₄

Rc³⁄₈

Rc¹⁄₄

Rc³⁄₈

Rc¹⁄₂

Rc¹⁄₂

Rc³⁄₄

QUBE45 series

QUBE65 series

QUBE105 series

QUBE SeriesSHUT-OFF VALVE3-way valve provided to stopmain pressure and exhaustremaining pressure in pipesconnecting to shut-off valve.

42

Model No.

C528（D）-02

Port sizeComponents

Air Filter Air Regulator Air LubricatorFilter element（μm）


Rc¹⁄₄ F504（D）-02 R364-02 L508（D）-025

20（Standard） 0.02～0.75BracketPressure gaugeDrainmasterSpring drain

（Note）C528：Plastic bowlC528D：Metal bowl without sight glass

Model No.

U558（D）-02

Port sizeComponents

Intergal Filter Regulator Air LubricatorFilter element（μm）


Rc¹⁄₄ B549（D）-02 L508（D）-025

20（Standard） 0.02～0.75BracketPressure gaugeDrainmasterSpring drain

AIR COMBINATIONUNITMINIATURE TYPEFRL unit consisting to integralFilter-Regulator and Air Lubricator. （Note）U558：Plastic bowl

U558D：Metal bowl without sight glass

（Note）F504：Plastic bowlF504D：Metal bowl without sight glass

AIR FILTERMINIATURE TYPESeparates and removes waterand dust in compressed air.

Model No.

F504-01、02F504D-01、02


（cm3）

Rc¹⁄₈、¹⁄₄

Rc¹⁄₈、¹⁄₄10 5（Standard）

20DrainmasterSpring drain

（Note）S504：Plastic bowlS504D：Metal bowl without sight glass

SLUDGE FILTERSeparates and removes sludgeand drain produced bycompressor.

Model No.

S504-01、02S504D-01、02

Port size Filter element（μm） OptionRecommended max. flow

（R/min（ANR））

Rc¹⁄₈、¹⁄₄

Rc¹⁄₈、¹⁄₄250 0.3

DrainmasterSpring drain

（Note）M500：Plastic bowlM500D：Metal bowl without sight glass

MICRO MIST FILTERHigh-performance air filter capableof removing more than 99.99998%of aerosol consisting of water andoil of more than 0.01μm.

Model No.

M500-01、02M500D-01、02

Port size Filter element（μm） OptionRecommended max. flow

（R/min（ANR））

Rc¹⁄₈、¹⁄₄

Rc¹⁄₈、¹⁄₄250 0.01

Oil mist removal（%）

99.99998DrainmasterSpring drain

AIR COMBINATIONUNITMINIATURE TYPEModular type FRL unit consistingof air filter, air regulator and airlubricator.

43

（Note）L508：Plastic bowlL508D：Metal bowl without sight glass

AIR LUBRICATORMINIATURE TYPE

Model No.

L508-02L508D-02

Port size Max.supply pressure（MPa） OptionBowl capacity

（cm3）

Rc¹⁄₄ 3011.2

Bracket

（Note）B549：Plastic bowlB549D：Metal bowl without sight glass

INTEGRALFILTER-REGULATORMINIATURE TYPE

Model No.

B549-01、02B549D-01、02


（cm3）

Rc¹⁄₈、¹⁄₄5（Standard）

2010

Reduced pressure range（MPa）

0.02～0.75BracketSpring drainDrainmasterPressure gauge

（Note）Direct mount pressure gauge for QUBE-45, 65 and 105 series is attached mounting screws.

PRESSURE GAUGEFor air regulators

Model No.

G25-52G10-52G10-51G10-41G10-21G10-41AG10-21AG10-3DG06-41G06-3DG04-52G04-51G04-41G025-41G01-41

Pressureindicating range

Mounting positionScrew at behind Screw at bottom Direct

Screw size

2.5MPa

1MPa

0.6MPa

0.4MPa

0.25MPa0.1MPa

R¹⁄₄

R¹⁄₄

R¹⁄₈

R¹⁄₈

－R¹⁄₈

－R¹⁄₄

R¹⁄₈

R¹⁄₈

R¹⁄₈

○○

○

－

－○－○

○

○○

－－

－

○

－－－－

－

－－

－－

－

－

○－○－

－

－－

Model No.

P130-02

Port size（Screw size）

Redured pressure range（MPa）

Rc¹⁄₄（R¹⁄₄） 0～0.07

RELIEF VALVE

AIR REGULATORMINIATURE TYPE

Model No.

R364-01、02R364L-01、02

Port size Max.supply pressure（MPa） OptionReduced pressure range

（MPa）

Rc¹⁄₈、¹⁄₄0.02～0.750.01～0.3

1.4BracketPressure gauge

44

Model No.

KAD-3EKAD-5GKAD-10GKAD-15EKAD-30EKAD-50E

Air flow（m3/min（ANR））

Applicable compressor（HP）

Inlet aircondition

Max.pressure（MPa）

Outlet airdew point（℃）

Power voltage（V Hz） Connection

0.30.51.11.53.76.3

35

10153050

Pressure 0.7MPaInlet airtemperature 35℃Ambienttemperature 32℃

110underpressure

1 phase 10050/60

1 phase 20050/60

3 phase 20050/60

Rc³⁄₈

Rc¹⁄₂

Rc³⁄₄

R³⁄₄

1B union1¹⁄₂B union

AIR DRYERKAD SeriesThis is the air dryer which isozone safety with R-134a（Ozonerupture modulus 0）as refrigerant.

●Standard type

Model No.

KAD-5SGKAD-10SGKAD-15SEKAD-20SE IIKAD-30SEKAD-50SEKAD-100SE

Air flow（m3/min（ANR））

Applicable compressor（HP）

Inlet aircondition

Max.pressure（MPa）

Outlet airdew point（℃）

Power voltage（V Hz） Connection

0.51.11.52.23.76.312.3

51015203050

100

Inlet air conditionPressure 0.7MPaInlet airtemperature 55℃Ambienttemperature 30℃

15～14underpressure

1 phase 20050/60

1 phase 10050/60

3 phase 20050/60

Rc¹⁄₂

Rc³⁄₄

R³⁄₄

R11B union1¹⁄₂B union2B union

●Higher temperature（max.80℃）inlet type

MEMBRANE TYPEAIR DRYERQ-FIT DRYERKMD SeriesNo external power sourcerequired.Freon free, environmentallyfriendly air dryer.

Model No.

KMD2KMD5

Port size Inlet air temperature（℃）

Purge air flow rate（m3/min（ANR））


Rc¹⁄₄、³⁄₈

Rc¹⁄₂0.2～0.8 5～50

Outlet air flow rate（m3/min（ANR））

20～20050～500

24（Std.）、1050（Std.）、24

http://www.kuroda-precision.co.jp/e-top

Access KURODA Home Page

FA Internet Service

Download Service

User Registration

Download

CD-ROM(CAD DATA LIBRARY)

CAD DATA LIBRARYLatest data is contained.

Customer

KURODA Sales Rep

KURODA Home Page Internet

http://www.kuroda-precision.co.jp/e-top

45

INTRODUCTION OF KURODA CAD DATA LIBRARY

KURODA CAD DATA LIBRARY contains CAD data of pneumatic equipment, ball screws,support units andsingle-axis modules.In addition, various tools for selecting pneumatic equipment and ball screws are listed in it. Please use thislibrary to improve the design performance of your FA related equipment.

CAD Data Library is available from CD-ROM supplied by our company or our company's Home Page viaInternet. For a CD-ROM, please ask KURODA sales representative in charge of your company.

How to Obtain CAD Data Library

How to Download from Home Page CAD Data of Main Pneumatic Equipment①Pneumatic Actuators

Series of air cylinders and rotary actuators are listed inCAD DAT LIBRARY.

②Pneumatic Grippers/Vacuum EquipmentSeries of parallel grippers, rotary opening/closinggrippers, vacuum units and pads are listed in it.

③Control ValvesSeries of solenoid valves such as ADEX VALVEs arelisted in it.

④Other EquipmentSeries of speed controllers, joints, etc. are listed in it.⑤Air Cleaning Equipment

Series of FRL combination QUBE are listed in it.

Kind of CAD data

Type of data CD-ROM

○

○

Home Page

○＊2○＊2

DXF

DWG(AUTO CAD)＊1

r12

r12

※1：Name of CAD software is our company's registered trademark.※2：Some of DWG type product data are not contained

(Note) CAD data is classified by each product andcontained in a self-extracting exectable file format(.exe).

parker kuroda complete catalogue

Documents

port solenoid valvepc13

port solenoid valvepc5

port solenoid valvess

port solenoid valvepm

double rod type

direct mount type

rc1b series3

rc2 series3