The World StandardIndustrial Tube Fittings,Adapters and EquipmentCatalog 4300August 2006Metric & BSP sized products are available from:MARYLAND METRICSP.O. Box 261 Owings Mills, MD 21117 USAph: (410)358-3130(800)638-1830 fx: (410)358-3142(800)872-9329web: http://mdmetric.com email: sales@mdmetric.comWhyworkyourdesignsaroundpartssomebodyelsedesigned, just because theyre available? We have an entirefacility dedicated to delivering custom fittings, manufacturedpreciselytoyourspecsordrawingsandinrecordtimewhetheryouneed2,000orjustthatone-of-a-kind.Chancesare itll cost less than you thought, too. So if you cant findthe right fitting, adapter or flange within this catalog,call1-866-222-2267.Ore-mailinquiriesregardingquota-tions to customfittings@Parker.com. Youd be amazed at thecool stuff we can do together.Our snowflake principle.(Since no two applications are the same.)Parker Hannifin CorporationTube Fittings DivisionColumbus, OhioWARNINGFAILUREORIMPROPERSELECTIONORIMPROPERUSEOFTHEPRODUCTSAND/ORSYSTEMSDESCRIBEDHEREINORRELATEDITEMSCANCAUSEDEATH,PERSONALINJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation byusershavingtechnicalexpertise.Itisimportantthatyouanalyzeallaspectsofyourapplicationandreviewtheinformationconcerningtheproductorsysteminthecurrentproduct catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making thefinal selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation andits subsidiaries at any time without notice.Offer of SaleThe items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governedby the provisions stated in the Offer of Sale. Copyright 2006, Parker Hannifin Corporation, All Rights ReservedA O-Ring Face SeaI Tube Fittings.................... Seal-Lok ........................................O-Ring Face SeaI Tube Fittings.................... Seal-Lok Lite ..................................37 FIare Tube Fittings and Adapters.......... Triple-Lok & Triple-Lok 2 ................FIareIess Bite Type Fittings.......................... Ferulok ...........................................ntru-Lok ........................................Metric Bite Type Fittings............................... EO and EO-2 .................................Adapters......................................................... Pipe Fittings and Port Adapters .....Pipe Swivels ..................................JS Fittings .....................................K4 BSP Adapters ...........................Komatsu Style Adapters ................Conversion Adapters .....................Code 61/62 FIange Connections................. Hydraulic Flanges & Components .Diagnostic, Orihce, BIeed Adapters, Screen and SpeciaIty Fittings................O-Rings and SeaIs................................................................................................Tube CIamps.................................................. ParKlamp nch Tube Clamps .........Metric Clamps ...............................Tube................................................................ Metric Tube ....................................Fabricating Equipment................................. Equipment .....................................AssembIy / InstaIIation........................................................................................GeneraI TechnicaI................................................................................................Appendix................................................................................................................Numeric Index, Fitting End Size Chart and Offer of SaIe..................................TabIe of Contents4300 CatalogntroductionParker Hannin CorporationTube Fittings Division Columbus, Ohiohttp://www.parker.com/tfdBC D E FG H I JKL M N O PQ R S T UVWN Specifically designed with an enhanced sealing arrangement and approved O-ring compounds for on-board vehicle hydrogen storage and delivery systems NAlso approved for on-board vehicle compressed natural gas(CNG) storage and delivery up to 350 bar (5000 psi).**N Designed with Parkers new H2 stud and H2 port which is compatible with standard SAE connectorsIntoday'seffortstomaximizefuelcellvehicledrivingrange,Seal-LokwithenhancedH2technologyfulfillsakeyrole.ThisParkerExclusive"seriesofferstheindustrysonly O-ring face seal (ORFS) type and positionable fitting approved for 700-bar (10,000psi)hydrogenservice.*Thefullrangeofthesestainlesssteelfittings and adapters is:Seal-LokH2 Fittings & AdaptersNShorter thread lengths and larger flow diameter than instrumentation-grade and traditional industrial hydraulic fittings NThe assembly and leak-free performance advantages of Seal-LokORFS (SAE J1453)NAdaptable to Parker Flexflange and similar light-duty flexible corrugated stainless steel tube, flexible hose interfaces, as well as hard-line metallic tube NParker Parflange method can be used, saving time and cost NTorque method can be used, assuring more consistent assemblyForhighflowatlow-tomedium-pressure applications,suchasfluidconveyanceinfuel cellsystemsandsemiconductormanufactur-ing,ParkersstainlesssteelSeal-LokLite fittingprovidesaremarkablycompact,reliable solution:for onboard hydrogen and CNG fuel systemsPRODUCT SPOTLIGHT The latest from Parker, still your fitting authority.Seal-Lok Liteflow diameterInstrumentationflow diameterthe compact, high-flow tube fittingSeal-Lok Lite *Series meets the requirements of EIHP Draft 12b, as tested by TV, and is the only fitting with approval for this demanding application. **Seal Lok fittings and adapters in both steel and stainless steel material with tested O-ring compound are approved to the ECE R110 regulation and ISO 15500 standard.Seal-Lok Litethread lengthsInstrumentationthread lengthsForalong-lasting,highlyreliableseal,ParkersTriple-Lok2combines theversatilityofourstainlesssteelTriple-Lokwithanelastomericseal design. Particlescanfindtheirwayintoasystemduringinstallation,main-tenanceandbyothermeans.Criticalandvaluablecompo-nentsneedonelastlineofdefense.Parkerscreenfittings, implementedinadditiontoyourfiltrationsystem,provide protection at the connection.NIdeal for protecting gauges and instrumentation, critical hydraulic compo-nents, precision orifices and expensive components in test bench circuits NRetain particle sizes from 480 to 65 microns, depending on screen rating NFor hydraulic or pneumatic applications constructed with stainless steel screen elements and available in standard fitting configurations, Triple-Lok 37 flare and Seal-LokORFS types NTested to determine the maximum pressure drop, screen retention and bi-directional flow capacityParker Screen Fittings for critical components and applicationsTriple-Lok 2the soft-seal stainless steel 37 fittingNIncorporates a replaceable soft seal in nose of flare, positioned to achieve leak-free connections without compromising fitting strength NUp to 20% higher working pressures than standard stainless steel 37 flared fittings NFeatures Parkers patented Robust Port Stud for easier assembly and further improved reliability for adjustable fittingsNSpecially engineered groove design prevents nose collapse for assured field performance NCan be used with standard flared tubes and hose ends and uses standard O-rings in most sizes for further convenience and savingsimproved performance by designAtParker,weneverstoppursuingperfection.Werealwaysworkingtofurtherassure leak-freeperformanceandmakecomponentsmaintaintheirlike-newintegritylonger.Theresultsareadvancedconnectionenhancements,orACEsolutions.Startingwith exclusiveinnovationslikethese,we'recontinuingtosetnewstandardsinperformance and savings for you.PRODUCT SPOTLIGHT The latest from Parker, still your fitting authority.NTrapezoidal seal shape improves retention within Seal-Lok's ORFS grooveNVirtually eliminates costly leakage and/or pre-assembly handling time NSignificantly reduces need to replace/reinstall seal NStandard O-ring can be used in field replacement (groove design unchanged)NSame material and hardness (90 Durometer Nitrile) as Parkers standard O-ringinnovative O-ring enhancementTrap-SealImagine,asealthatdoesntgetpinchedandfailprematurely.Parker'sTrap-Seal,withits consistentlypositiveretentioninthegroove,essentiallyeliminatesthepossibilityof pop-out that can occur with standard round-shaped O-rings. improved SAE adjustable port studTheRobustPortStudallowsforeasier,mistake-proofinstallationinthefieldand eliminates the potential for backup washer damage that can lead to leaks.NLonger locknut provides more area to wrench, while keeping the threads covered NNo need to retrofit any parts functional dimensions are same as current SAE adjustable connectorsJust three basic assembly steps ensure that it's done right the first time: Thread the connector into the port. Back it off to alignthe tube end. Tighten the locknut.Robust Port StudHigherpressureratingsandgreaterreliabilityareamongthevaluableadvantagesofourenhancedTriple-Lokfemaleconnectiondesign.Itfeaturesadual-angleseatthatacceptsboth37and45flarefittingsandrepositionstheseal-ing location away from the tip of the male nose. Compared with the previousswivel design, the resulting benefits include:N Increased pressure ratings in most sizes (in fact, 72% higher than competitive product)N Sealing position that helps protect cone and nose, and improves connection reliabilityN Dual seat acceptance of 37 (all sizes) and 45 flare fittings (sizes 4, 5, 8, 10) N No difference in overall swivel nut or fitting body size, no change in torque or assembly methodTriple-Lok Swivel Connectionplating changes for new global standardsNEliminates time-consuming pre-cleaning, post-cleaning and x-ray operations, as well as theneed for cleaning solvents, weld rods, acetylene or fluxNUtilizes a patented orbital spindle process to produce a reliable flange with a smooth mating surfaceNCreating a flat face requires no special skills and can be completed in fewer than 20 secondsCut your tube assembly time by as much as 75%. In one quick operation, the Parflange process perfectly flanges (90) or flares (37), providing a reliable seal for high-pressure tubes up to 1-1/2" or 38 mm O.D. without brazing or welding for a leak-free connection every time.the revolutionary tube connection systemParflange TechnologyAvailable models include the 1050 WorkCentre for large-scale industrial production and the bench mountable 1025.ParkerTubeFittingsDivisioncanmanufacturecustomproductstoyourspecifications,yourdrawings,or world standards whether you need thousands or just one of a kind. And by turning to us, you can typi-callyreduceyourleadtimesandthepriceoflower-volumeparts.With our exclusive Rapid Response system and integrated computer-to-machine technology we can:NProduce new parts in remarkably short time frames NReduce machine set-up times NProduce smaller-run quantities NRespond to emergency orders within hours, not daysfor applications as different as snowflakesNext time you have a great idea or an urgent requirement, call Parker and ask for "custom fittings."Custom ProductsWiththeuseofhexavalentchromium(Cr6)restrictedinEurope,we'vechangedourmetalplatingprocessforthebetter.OurChromium-6Freeprocessresultsinanewgenerationofcharacteristics in our metal fluid-connection components, including: NSilver (no longer gold) appearanceNSafer for the environment NImproved corrosion protection over previous platingNNo changes in assembly method or torqueNPackaging labeled Chromium-6 Free for easy identificationIt'sjustonemoreexampleofParker'sdrivetokeepourproductsandyoursinreadycompliancewith changing global requirements.Adobe Reader Help PageIntroductionThe Parker Hannifn Tube Fittings Division 4300 digital catalog is a single Adobe Reader application that is made up of many fles. We have added bookmarks and links to allow you to easily navigate through the document. You'll notice that some text is highlighted in blue throughout the catalog. This means that the text has been linked to additional in-formation about that subject. f you click on one of these words, you will immediately jump to a page with information about the subject highlighted in blue.Navigation Buttonsn addition to Adobe's standard links and bookmarks, we have created special navigation buttons to help you fnd related pieces of information. You will fnd these buttons on the pages of the catalog that show our parts. Each of these navigation buttons will take you to specifc information related to each part, as shown below:These parts will have a navigation button near the part name that looks like this:Click on the Full Dimensions button to go to the page which shows all the dimensions for that part. To return to the catalog, click on the Return To Catalog button:Adobe Menu BarThe Adobe menu bar is illustrated and described on the following page. For more information about how the Reader program works, select the "Reader Online Guide from the Help menu.Searching for a Specic PartTo make this digital catalog easier to use, we've created an index of all the key words and part numbers in the catalog. The Adobe menu bar, shown on the next page of this help fle, shows the Search icon. t is found near the right side of the menu bar. The icon looks like a pair of binoculars with a page in the background. This icon allows you to search for any part in the catalog simply by clicking on the icon. After clicking on the icon, simply type in the word, phrase, or part number you want to fnd and a list of fles will appear. Click on the frst fle in the list and the page will appear with the part number highlighted. To see the next reference, you can return to the full list of documents or use the "Next Highlight button.NOTE: Adobe as a trademark of Adobe Systems ncorporated.Parker Hannin CorporationTube Fittings DivisionColumbus, OHhttp://www.parker.com/tfdaIurnTo6aIaIogWhere Did AII the Dimensions Go?f you've used previous editions of this catalog, you'll notice that most of the tables and graphics in this edition have been edited to show only the most relevant dimensions. A feature of this digital catalog is that we have created links to pages which show all of the dimensions of a part. Not every part has one of these "fully dimensioned pages - only those parts that don't show the full dimensions in the catalog will have one.FuII ImansIonsLinks to 0rderinu nlormationLinks to Conlormance StandardsLinks to Assemblv nstructionsLinks to the TFB web SiteLinks to Relerence nlormationaIaranra86kModaIkssambIy l InsIaIIaIIon$parshoWTordarLinks to \isualndexVisuaI IndexMARYLAND METRICSP.O. Box 261 Owings Mills, MD 21117 USAph: (410)358-3130(800)638-1830 fx: (410)358-3142(800)872-9329web: http://mdmetric.com email: sales@mdmetric.comAdobe Reader Help PageParker Hannin CorporationTube Fittings DivisionColumbus, OHhttp://www.parker.com/tfdOverview of Adobe Reader with Search CapabiIity Menu BarUsing this digital catalog is simple once you've familiarized yourself with the Adobe Reader menu bar. Below is an illustration of the menu bar and a discussion of each button. Connect to Adobe'sWeb SiteOpen PrintHand ToolTextSelect ToolFirst PageNext PagePrevious PageLast PageActual SizeFitWidthFit in WindowRotate View 90 CCWGo ToPrevious ViewGo To Next ViewRotate View 90 CWSearchOpen:Click to open a new fle.Save:Click to Save a fle.Print:Click to print the current document. The print dialog box will open and allow you to select your print options.EmaiI: Email a pdf.Search: This tool searches for a word, a phrase, or a part number through all documents in the application.Hand TooI:The Hand Tool is a move and selection tool. Use it to click on linked text and buttons to activate them. Use it to move the document page on-screen by clicking and dragging the Hand Tool in the direction you want the page to move.SeIect Text TooI:Text can be selected in Adobe Reader, copied, and then pasted into other programs. Use the Select Text Tool to select text.SnapShot TooI:Use this tool to copy text and graphics.First Page:Click to go to the frst page of the open,selected document.Previous Page:Click to go to the previous page of the open, selected document.Next Page:Click to go to the next page of the open, selected document. To move to a specifc page, click on the page numbers in the status bar at the bottom of your screen. A window will open that allows you to enter the page number to which you want to go.Last Page:Click to go to the last page of the open, selected document.Go to Previous View:This button allows you to retrace your steps. Click on it to go to your previous view.This is helpful for returning to your original location after clicking a link to another location.Go to Next View:Use this button to retrace your steps forward.Zoom In TooI:Click on this tool, then on your document to zoom in. Click on the "Actual Size, "Fit in Window, or "Fit Width button to return to another view.ActuaI Size:Click to display the page at it's actual size.Fit in Window:Click to scale the whole page to ft within your screen.Fit Width: Click to scale the page width to fll the width of your screen.Rotate View 90 CCW: Click to rotate the page 90 counter-clockwise.Rotate View 90 CW: Click to rotate the page 90 clockwise.Connect to Adobe's Web Site: Click to connect to Adobe's Web site.Navigation Pane:The Navigation Pane displays the book-marks and thumbnails that have been created for the fle. When the Navigation Pane is toggled to "Hide, the bookmarks and thumbnails are not displayed and cannot be seen. Note that bookmarks and thumbnails can be displayed independently by using the Window menu and selecting Show Bookmarks or Show Page Thumbnails.Bookmarks: Bookmarks appear on the left side of your screen and allow you to jump to a specifc location from anywhere in the document. (Links, on the other hand, al-low you to jump only from a specifc location to a specifc location.) Click on a bookmark to move immediate to that location. Page ThumbnaiIs: The page thumbnails tab diplays a very small picture of each page in the fle. Click on a thumb-nail to go to that page.Navigation Pane:Bookmarks Page ThumbnailsSave EmailSnapshot ToolZoom n ToolSea-Lok O-Rng Face Sea Tube FttngsThe Fttng AuthortyA2Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsLOHB3ORFS / Braze Socket A18BLTube Nut A10TL (Inch and Metric)Braze Sleeve A11TL-ReducerBraze Reducer Sleeve A11TPL (Inch and Metric)Parfange Sleeve A10WLNLBulkhead Locknut A12TRLONTube End Reducer A19LOHL6Extender and Expander A19Nuts,SIeeves,LocknutsStraightsHLOUnion A13Straight SwiveIs45 EIbowsF87OMLOORFS / SO 6149 A16HMLOUnion - mm Hex A13WNMLOBulkhead Union - mm Hex A22V87OMLOORFS / SO 6149 A23BML Tube Nut - mm Hex A10WLNMLBlkhd Locknut - mm Hex A12SBR (Inch and Metric)Braze RingA12FLOORFS / NPTF A15GLOORFS / NPTF A16F42EDMLOORFS / BSPP-ED A16F82EDMLOORFS / Metric-ED A16LHPORFS Flange Seal A17MMLOHB3ORFS / Braze - mm Hex A18F65OLORFS Swivel / SAE-ORB A20HL6ORFS Swivel Union A19G65LORFS Swivel / SAE-ORB A20F6LORFS Swivel / NPTF A20G6LORFS Swivel / NPTF A20F687OMLORFS Swivel / SO 6149 A21F682EDMLORFS Swivel / Metric-ED A21F642EDMLORFS Swivel / BSPP-ED A21 WNLOBulkhead UnionA21VLOORFS / NPTF A22V6LOORFS Swivel Elbow A22V5OLOORFS / SAE-ORB A22V4OMLO ORFS / BSPP-ORR A23LOHT3ORFS / Tube Weld A18WLOBulkhead Union A13WMLOBulkhead Union - mm Hex A14FF5OLOORFS - Long / SAE-ORB A15F5OLOORFS / SAE-ORB A15WF5OLOORFS Blkhd / SAE-ORB A14G5LOORFS / SAE-ORB A15LHMPORFS Flange Seal A17A3Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube Fittings90 EIbowsWEMLOBulkhead Union - mm Hex A24C87OMLOORFS / SO 6149 A26C6MLOSwivel Elbow - mm Hex A25EMLO Union Elbow - mm Hex A23S6MLOSwivelBranch - mm Hex A30WJJMLO Bulkhead Run - mm Hex A30R6MLOSwivel Run - mm Hex A31JMLO Union Tee - mm Hex A28WJMLOBlkhd Branch - mm Hex A29TeesPIugs, Caps and BIeed AdaptersCrossesCC87OMLOORFS / SO 6149 - Long A27WELOBulkhead Union A24ELOUnion Elbow A23C6LOORFS Swivel Elbow A25AOEL6ORFS Swivel / SAE-ORB A25CLOORFS / NPTF A26C5OLOORFS / SAE-ORB A25CC5OLOORFS / SAE-ORB - Long A26C4OMLOORFS / BSPP-ORR A28JLOUnion Tee A28WJLOBulkhead BranchA28WJJLOBulkhead RunA29S6LOORFS SwivelBranchA30R6LOORFS Swivel Run A31S5OLOSAE-ORBBranch Tee A31R5OLO SAE-ORBRun Tee A32S87OMLOSO 6149 Branch Tee A32R87OMLO SO 6149 Run Tee A33SLONPTF Branch Tee A32S4OMLOBSPP-ORR Branch Tee A33R4OMLOBSPP-ORR Run Tee A34KMLOUnion Cross - mm Hex A34PNLOORFS Plug A35KLOUnion Cross A34FNLORFS Cap A35PNMLOORFS Plug - mm Hex A35FNMLORFS Cap - mm Hex A35C8OMLOORFS / Metric-ORR A27Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsA4Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsLOHL6 OriceOrifce Swivel withOrifce / ORFSN9LOHL6G5TPOrifce Swivel / ORFS / SAE-ORBN5PNLOBABleed Screw / ORFS N10FNLBABleed Screw / SAE-ORB N10Diagnostic,BIeed Adapters &Screen FittingsDiagnostic. Bleed Adapters & Screen Fittings (Shown in Section N)SAE FIange AdaptersFlange Adapters (Shown in Section M)LOHQ1Code 61 / ORFS M10LOVQ1Code 61 / ORFS M28LOHQ2Code 62 / ORFS M10LOEQ1Code 61 / ORFS M29LOEQ2Code 62 / ORFS M29LOVQ2Code 62 / ORFS M28O-Ringsand SeaIsO-Rings and Seals (Shown in Section O)ORFS O-Ring O3PLS Bonded SeaI O3SAE O-Ring O3ISO 6149 O-Ring O4Metric O-Ring O4Metric Retaining Ring O4BSPP O-Ring O5EOIastic SeaI Ring O6Conversion AdaptersConversion Adapters (Shown in Section L)XHL637Flare / ORFS Swivel L3LOHX6ORFS / 37 SwivelL3XHLO37 Flare / ORFS L3BUHLOORFS / Flareless (inch) L4LOHU86Metric Swivel (EO)/ORFS L4LOEX6ORFS / 37 Swivel L3BSPP Retaining O-RingO5Screen Fittings N12A5Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.Fig. A2 Captive O-ring Groove (CORG) CutawaySeaI-Lok IntroductionThe Seal-Lok ftting was developed by the Tube Fittings Division in the early 1980s. This product has proven to be very effective in eliminating leakage at the higher pressures found in today's hydraulic systems. t meets or exceeds the strict requirements of SAE J1453 and SO 8434-3. The Seal-Lok ftting is an O-ring face seal type ftting that consists of a nut, a body, an O-ring and a sleeve (Fig. A1). As shown in Fig. A3, the tube is fanged to 90 (or the tube may be brazed instead to a braze-type sleeve). When the ftting is assembled, it compresses an O-ring in the precisionmachinedgrooveofthefttingbodytoformaleak tight seal.Seal-Lok fttings are suitable for a wide range of tube wall thick-nesses and are readily adaptable to pipe, inch or metric tubing and hose. (Please refer to Tables A2 and A3 for min./max. tube wall thickness for inch and metric tubing, respectively).Seal-Lok's leak-free design and rugged construction make it suitable for a wide range of applications where higher pressures, vibra-tion and impulse are prevalent. t is popular in markets such as construction,agriculture,machinetool,utility,papermaking, automotive, etc.Design and ConstructionThe Seal-Lok ftting consists of four main components: a body, a sleeve, an O-ring and a nut. The more popular materials from which Seal-Lok is manufactured are shown in Table A1.The SeaI-Lok Fitting Body. There are over 60 different body confgurations to choose from for specifc applications. The body face is manufactured with Parker's CORG (captive O-ring groove), which keeps the high durometer O-ring captive during installa-tion (see Fig. A2). n addition, the Seal-Lok ftting body shapes are forged for added strength and longer service life, eliminating the potential leak paths associated with multi-component brazed fttings.Straight products are made from cold drawn barstock. The cold drawing process ensures consistent dimensional toler-ances, improved strength and better surface fnish. The SeaI-Lok Fitting Nut. Seal-Lok tube nuts are either cold formedormachinedfromcolddrawnbarstock,depending on the size.The cold forming process increases the material strength and its fatigue properties, imparting high strength and longer service life to the nuts. The SeaI-Lok FIange SIeeve. The preferred method of making a Seal-Lok connection is by using the Parker Parfange machine (see section S) to create the 90 fange on the tube end. A fange sleeve is used to support the fange and the tube. t also provides the contact shoulder for the nut, a back-up for the 90 tube fange and support at the tube O.D (see Fig. A3). The Parfange process provides the following advantages:Several times faster than brazing.Does not require any special pre- or post-fange cleaning.Cleaner and safer than brazing.Accommodates the use of plated or unplated sleeve and tube. Eliminates a potential leak path associated with braze joints.Fig. A1 SeaI-Lok Fitting Body, O-ring, SIeeve and NutTabIe A1 Standard MateriaI Specications for SeaI-Lok Fittings*All stainless steel nuts are coated to prevent galling at as-sembly.Note: Other materials can be produced upon request.Finish: Zinc with yellow chromate (being changed to zinc chromium 6 free) is used on all standard steel products. Stainless steel fttings are passivated.SeaI-LokFittingsSteeI StainIess SteeIASTM Type ASTM TypeForged Bodies A576 1214/1215 A182 316Bar Stock Bodies A108 12L14 A479 316Cold Formed Nuts A576 C1010 -- --Machined Nuts*A10812L14 11L37 A479 316Braze Sleeves &Braze Connectors A108 12L14 A276 316LFlange Sleeves A108 12L14 A479 316Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsA6Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsFig. A3 SeaI-Lok Union cutaway with angedand brazed assembIiesThe SeaI-Lok Braze SIeeve. A second method of sleeve at-tachment is with the braze sleeve. The sleeve is brazed to the tube end as shown in Fig. A3. The fat, smooth surface of the brazesleevesealsagainsttheO-ringwhenfullyassembled. The holding power is provided by the braze.The SeaI-Lok Trap-SeaI. The Trap-Seal, with its consistently positive retention in the groove, essentially eliminates the pos-sibility of full or partial O-ring pop out.The seal's trapezoidal shaped cross-section leads to improved retention within Seal-Lok's CORG groove and virtually eliminates costly leakage and timeconsumingpre-assemblyhandling.Thegroovedesign has not changed, so the standard O-ring can be used for seal replacement in the feld.Currently, the Trap-Seal is offered in 90-durometer Nitrile (NBR).How SeaI-Lok Fittings WorkThe Seal-Lok ftting body face contains a high durometer O-ring that is held captive in a precision machined groove. As the nut is tightened onto the ftting body, the O-ring is compressed be-tween the body and fat face of the tube fange or braze sleeve to form a tight, positive seal (see Fig. A3).As the two faces come in contact, further tightening of the nut producesasharpriseinassemblytorque.Asolidpullofthe wrench at this point, to recommended assembly torque, com-pletes the assembly. The sharp torque rise gives a "solid feel at assembly, minimizing the possibility of over tightening.Because the sealing surfaces are fat and perpendicular to the assemblypull,theyremainvirtuallyfreeofdistortionduring assembly, giving Seal-Lok fttings practically unlimited remake-ability. The O-ring should be inspected at each disassembly and replaced when necessary. See the O-Rings and SeaIs section for information on repIacement ORFS O-rings.AssembIy and InstaIIationPlease refer to Section T for the assembly and installation instructions for Seal-Lok fttings.Metric SeaI-Lok The tube/hose end connection for metric Seal-Lok is the same as standard (inch) Seal-Lok. t consists of a body, a fange or braze sleeve, an O-ring and a nut. The difference is at the port endoftheftting.nsteadoftheSAEstraightthreadconnec-tion, it features a similar connection with metric threads per SO 6149-2. Additionally, the ftting body, tube nut and locknut are manufacturedwithmetrichexesorforgingwrenchfats. The metricSeal-Lokfttingsmeetorexceedallrequirementsof SO 8434-3. Braze SIeeveO-ring (Trap-SeaI)Parange SIeeveNutFitting BodyFig. A4 Metric SeaI-Lok Straight and Shaped Connectors with Identication for use with ISO 6149-1 PortFig. A5 Metric (Tube) SeaI-Lok SIeevesTurned Diameter with GrooveTurnedDiameterSmaII Identication Groove for Metric TubeA7Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.IdenticationTo differentiate metric Seal-Lok from standard (inch) Seal-Lok, the following identifcation features have been incorporated in the design:Straight connectors (straight studs) have a short length of turn diameter with a small groove machined in it's middle, as seen in Fig. A4.The locknuts on shaped connectors (stud elbows, tees and crosses) have a similar turn diameter adjacent to the washer, without a groove, as seen in Fig. A4.The sleeve is identifed by a small groove machined on its large diameter as shown in Fig. A5.VersatiIityThe Seal-Lok ftting is very versatile in that it can be used with inch and metric tubing, as well as hose (see Fig A6). Thefollowingexampleillustratestheoptionswitha"(-8) Seal-Lok ftting:" ftting and " nut can connect to " tubing using the " sleeve. ftting and " nut can connect to 12 mm tubing using 12 mm sleeve.Without nut and sleeve, " ftting can connect to hose.Theprocessalsoworksinreverse.AmetricSeal-Lokftting and metric nut can connect to inch tubing by simply using the inch sleeve.Tube WaII ThicknessRecommended min/max tube wall thicknesses for inch and metric Seal-Lok are provided in Tables A2 and A3, respectively. When using the braze method, all tube wall thicknesses can be used. For Parfange min/max tube wall thickness range, please refer to page S26 for tooling availability.With any ftting, proper assembly and installation is critical to its success. Please refer to pages T13-T18 for the proper assembly and installation procedures for the Seal-Lok ftting.Fig. A6 SeaI-Lok Works with Inch or Metric Tube and HoseTabIe A2 Recommended Min./Max. Tube WaII Thickness for Inch SeaI-LokTabIe A3 Recommended Min./Max. Tube WaII Thickness for Metric SeaI-LokBodynch Sleeve and TubeMetric Sleeve and TubeNutHoseSizeSteeI, AIIoy SteeI, St. SteeI, Copper, MoneIO.D. InchesDash NumberSAE O-RingFace SeaI SeaI-Lok1/4 -4 .020 - .0833/8 -6 .020 - .1091/2 -8 .028 - .1485/8 -10 .035 - .1343/4 -12 .035 - .1487/8 -14 .035 - .1561-16 .035 - .18811/4 -20 .049 - .22011/2 -24 .049 - .2502-32 .058 - .250SteeI, AIIoy SteeI, StainIess SteeI, Copper, MoneIO.D. Size in mmWaII Thickness in mmUsed With Fitting Size6 .5 - 2.25 -48 1.0 - 2.5 -610 1.0 - 3.0 -612 1.0 - 3.5 -814 1.0 - 4.0 -1015 1.0 - 3.0 -1016 1.0 - 3.0 -1018 1.0 - 3.0 -1220 1.5 - 4.0 -1222 1.0 - 3.0 -1625 2.0 - 5.0 -1628 1.5 - 5.0 -2030 2.0 - 5.0 -2032 2.0 - 2.5 -2035 2.0 - 6.0 -2438 2.5 - 7.0 -24A8Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsSeaI-Lok FeaturesTabIe A4 SeaI-Lok Features, Advantages and Benets Feature Advantage BenetConformance to SAE J1453 and SO 8434-3Versatility for end user and customer standardization effortsStandardization reduces procurement costs.Elastomeric seal Tolerant of surface imperfections to provide leak-free connectionReduces operational and maintenance costsHigh pressure rating Good for wider range of applications, providing opportunity to standardizeStandardization reduces procurement costsNo tube entry (fat-face design) Easy and fast drop-in installation Saves assembly and disassembly timeCaptive O-ring groove (CORG) Prevents O-ring fall-out to ensure positive and leak-free connectionRedues operational and maintenance costsForged Shapes Higher resistance to mechanical shock and vibration that can lead to leakageReduces operational and maintenance costsSimilar envelope size to 37 fared fttingMinimizes re-design of hydraulic systems Reduces re-design costsWide tube wall range (no wall thickness limitation for braze method; however, recommended min/max ranges are shown on page A7)Allows for greater fexibility in design of hydraulic systemReduces design costsResistance to over-torque Minimizes damage during assembly Reduces operational and maintenance costsUnlimited reusability/ remakeabilityExtends the service life of the ftting Reduces maintenance costs and component replacement costs.Parfange method of assembly Several times faster than brazing/welding Reduces assembly costNo special pre- and post-braze welding cleaningReduces tube preparation costNo open fame or heat source required mproves operator safetyNo braze joint or potential leak path Reduces operational and maintenance costsA9Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.SeaI-Lok O-Ring Face SeaI Tube Ends1) D and D1 nominal may vary from the values shown in the chart by 0.004 to 0.008. Also, D for -4 metric based Seal-Lok may be D.197 (5 mm) to satisfy SO 8434-3 (1994 edition). Contact the Tube Fittings Division if there are any questions.2) Recommended clearance hole = W + 0.015.3) See page O3 for ORFS O-rings.SeaI-Lok MaIeTube EndSeaI-Lok SwiveI SeaI-Lok Tube EndAssembIySeaI-Lok BuIkheadThreadTube Nut HexSwivel Nut HexBulhkead Locknut HexNominal Drill Tube EndNominal Drill Swivel EndMax Bulkhead ThicknessTube Nut Assembled AllowanceSwivel Turn BackMaleTurn BackBulkheadAcross CornersLocknut ThicknessPilot Dia LengthTube Nut HexSwivel Nut HexSAE Dash SizeTube O.D.TUN/UNFC C2 C3 D1)D11)E F L1 L4 R W2)WWU1 U2(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in)4 1/4 6 9/16-18 11/16 17 11/16 17 13/16 22 0.172 0.165 0.55 0.255 0.6420.394 0.27 0.563 1.24 0.80 0.806 3/88 1011/16-16 13/16 22 13/16 22 1 27 0.264 0.264 0.55 0.295 0.7150.441 0.32 0.688 1.34 0.94 0.948 1/2 12 13/16-16 15/16 24 15/16 24 1 1/8 30 0.378 0.358 0.55 0.394 0.8650.512 0.35 0.813 1.44 1.08 1.0810 5/814 15 161-14 1 1/8 30 1 1/8 30 1 5/16 36 0.484 0.453 0.55 0.393 0.9800.618 0.41 1.000 1.60 1.30 1.3012 3/418 201 3/16-12 1 3/8 36 1 3/8 36 1 1/2 41 0.609 0.547 0.55 0.452 1.1100.677 0.41 1.188 1.64 1.58 1.5814 7/8 - 1 5/16-12 1 1/2 1 1/2 1 5/8 0.709 0.709 0.55 0.512 1.1450.697 0.41 1.313 1.66 1.74 1.7416 122 251 7/16-12 1 5/8 41 1 5/8 41 1 3/4 46 0.811 0.783 0.55 0.512 1.1900.697 0.41 1.438 1.66 1.88 1.8820 1 1/428 30 321 11/16-12 1 7/8 50 1 7/8 50 2 50 1.024 1.024 0.55 0.512 1.2510.697 0.41 1.688 1.66 2.16 2.1624 1 1/235 382-12 2 1/4 60 2 1/4 60 2 3/8 60 1.260 1.260 0.55 0.512 1.3300.697 0.41 2.000 1.66 2.60 2.6032 242 502 1/2-12 2 7/8 2 7/8 2 3/4 1.772 1.772 0.50 0.629 1.6900.874 0.54 2.500 1.83 3.32 3.32Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog A10Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.BLTube NutORFSSAE 520110BMLTube Nut - mm HexORFSSO 8434-3 NASAE 52M0110ATPLParfange Sleeve for nch TubingORFS Mechanically Attachable SleeveTPL {Metric]Parfange Sleeve for Metric TubingORFS MechanicallyAttachable Sleeve* Sizes 14 and 32 are not included in SAE J1453.** These tube nuts should not be exposed to annealing temperatures, such as furnace brazing. Contact the Tube Fittings Division for information on special nuts.TUBEFITTINGPART #ENDSIZE(in.)T6UNF/UNF-2BBHEX(in.)C(in.)G(in.)STANDARDMATERIALFROM STOCK-S -SS4 BL 1/4 9/16-18 11/16 0.41 0.58 6 BL 3/8 11/16-16 13/16 0.53 0.67 8 BL 1/2 13/16-16 15/16 0.65 0.83 10 BL 5/8 1-14 1 1/8 0.83 0.93 12 BL 3/4 1 3/16-12 1 3/8 0.95 1.02 12-14 BL 7/8 1 3/16-12 1 3/8 0.99 1.22 14 BL* 7/8 1 5/16-12 1 1/2 1.08 1.0416 BL 1 1 7/16-12 1 5/8 1.14 1.10 20 BL 1 1/4 1 11/16-12 1 7/8 1.42 1.10 24 BL 1 1/2 2-12 2 1/4 1.73 1.10 32 BL* 2 2 1/2-2 2 7/8 2.22 1.30 TUBEFITTINGPART #END SIZEDTHREADUN/UNF-2BD13DRILL(mm)H(mm)SHEX(mm)STANDARDMATERIALFROM STOCK(mm) (in.) S SS4BML 6 1/4 9/16-18 10.5 15 17 6BML 8,10 3/8 11/16-16 13.55 17 22 8BML 12 1/2 13/16-16 16.6 20 24 10BML 14,15,16 5/8 1-14 21.1 24 30 12BML 18,20 3/4 1 3/16-12 24.15 26.5 36 16BML 22,25 1 17/16-12 29.1 27.5 41 20BML 28,30,321 1/4 1 11/16-12 36 27.5 50 24BML 35,38 1 1/2 2-12 44 27.5 60 TUBEFITTINGPART #D5ENDSIZE(in.)D8DIA(in.)L(in.)STANDARDMATERIALFROM STOCK-S -SS4 TPL 1/4 0.50 0.30 6 TPL 3/8 0.62 0.34 8 TPL 1/2 0.74 0.42 10 TPL 5/8 0.92 0.42 12 TPL 3/4 1.09 0.47 16 TPL 1 1.34 0.53 20 TPL 1 1/4 1.59 0.52 24 TPL 1 1/2 1.91 0.49 32 TPL 2 2.39 0.54 TUBEFITTINGPART #USEDWITHFITTINGSIZED5ENDSIZE(mm)D8DIA(mm)L(mm)STANDARDMATERIALFROM STOCK-S -SSTPLS6 -4 6 13 7.5 TPLS8 -6 8 16 8.5 TPLS10 -6 10 16 8.5 TPLS12 -8 12 19 10.5 TPLS14 -10 14 21 10.5TPLS15 -10 15 23.5 10.5 TPLS16 -10 16 23.5 10.5 TPLS18 -12 18 28 12 TPLS20 -12 20 28 12 TPLS22 -16 22 34 13.5TPLS25 -16 25 34 13.5 TPLS28 -20 28 40.5 13TPLS30 -20 30 40.5 13 TPLS32 -20 32 40.5 13 TPLS35 -24 35 48.5 12.5 TPLS38 -24 38 48.5 12.5 A11Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.TL-ReducerReducer SleeveORFS Silver Braze Sleeve ReducerSAE 520115Unplated part, oil dipped for corrosion protection.* D is for silver brazing.** 12-14 TL must be assembled with 12-14 BL.TLBraze Sleeve for nch TubingORFS Silver Braze SleeveSAE 520115TL {Metric]Braze Sleeve for Metric TubingORFS Silver Braze SleeveSO 8434-3 BRSLSAE 5201M15Unplated part, oil dipped for corrosion protection.* D is for silver brazing.** Sizes 14 and 32 are not included in SAE J1453.Unplated part, oil dipped for corrosion protection.* D is for silver brazing.TUBEFITTINGPART #ENDSIZE(in.)ADIA(in.)D*(in.)E(in.)F(in.)STANDARDMATERIALFROM STOCK-S -SS4 TL 1/4 0.50 0.26 0.04 0.37 6 TL 3/8 0.62 0.38 0.04 0.37 8 TL 1/2 0.75 0.51 0.04 0.37 10 TL 5/8 0.92 0.63 0.06 0.41 12 TL 3/4 1.10 0.76 0.06 0.55 14 TL** 7/8 1.22 0.88 0.06 0.5516 TL 1 1.35 1.01 0.06 0.61 20 TL 1 1/4 1.60 1.26 0.06 0.61 24 TL 1 1/2 1.91 1.51 0.06 0.61 32 TL** 2 2.41 2.01 0.06 0.65 TUBEFITTINGPART #USEDWITHFITTINGSIZED*ENDSIZE(mm)D8DIA(mm)L(mm)L2(mm)STANDARDMATERIALFROM STOCK-S -SSTLS6 -4 6 12.8 9.5 1 TLS8 -6 8 15.8 9.5 1 TLS10 -6 10 15.8 9.5 1 TLS12 -8 12 18.9 9.5 1 TLS16 -10 16 23.5 10.5 1.5 TLS20 -12 20 27.9 14 1.5 TLS25 -16 25 34.2 15.5 1.5 TLS30 -20 30 40.6 15.5 1.5 TLS38 -24 38 48.5 15.5 1.5 TUBEFITTINGPART #END SIZEA(in.)D*(in.)E(in.)F(in.)STANDARDMATERIALFROM STOCK1(in.)2(in.) -S -SS6-4 TL 3/8 1/4 0.62 0.26 0.08 0.41 8-4 TL 1/2 1/4 0.75 0.26 0.14 0.47 8-6 TL 1/2 3/8 0.75 0.38 0.14 0.47 10-4 TL 5/8 1/4 0.92 0.26 0.20 0.53 10-6 TL 5/8 3/8 0.92 0.38 0.20 0.53 10-8 TL 5/8 1/2 0.92 0.51 0.20 0.53 12-4 TL 3/4 1/4 1.10 0.26 0.24 0.57 12-6 TL 3/4 3/8 1.10 0.38 0.24 0.57 12-8 TL 3/4 1/2 1.10 0.51 0.24 0.57 12-10 TL 3/4 5/8 1.10 0.63 0.24 0.57 12-14 TL** 3/4 7/8 1.10 0.88 0.06 0.65 16-8 TL 1 1/2 1.35 0.51 0.28 0.61 16-10 TL 1 5/8 1.35 0.63 0.28 0.61 16-12 TL 1 3/4 1.35 0.76 0.18 0.67 16-14 TL 1 7/8 1.35 0.88 0.12 0.67 20-12 TL 1 1/4 3/4 1.60 0.76 0.28 0.77 20-16 TL 1 1/4 1 1.60 1.01 0.28 0.83 24-16 TL 1 1/2 1 1.91 1.01 0.28 0.83 24-20 TL 1 1/2 1 1/4 1.91 1.26 0.28 0.83 A12Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 CatalogSeal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.WLNLBulkhead LocknutSAE 520118* Size 14 is not included in SAE J1453.WLNMLBulkhead Locknut - mm HexSO 8434-3 BHLNSAE 52M0118SBRSilver Braze Ring for nch TubingSBR recommended for steel or copper tubing.SBR-SS recommended for stainless tubing, but can be used on steel tubing.Contact the Tube Fittings Division for braze rings used in marine or special applications.SBRSilver Braze Ring for MetricTubingSBR recommended for steel or copper tubing.SBR-SS recommended for stainless tubing, but can be used on steel tubing.Contact the Tube Fittings Division for braze rings used in marine or special applications.TUBEFITTINGPART #ENDSIZE(in.)TTUBE ENDUN/UNF-2ABHEX(in.)TT(in.)STANDARDMATERIALFROM STOCK-S -SS4 WLNL 1/4 9/16-18 13/16 0.27 6 WLNL 3/8 11/16-16 1 0.32 8 WLNL 1/2 13/16-16 1 1/8 0.35 10 WLNL 5/8 1-14 1 5/16 0.41 12 WLNL 3/4 1 3/16-12 1 1/2 0.41 14 WLNL* 7/8 1 5/16-12 1 5/8 0.4116 WLNL 1 1 7/16-12 1 3/4 0.41 20 WLNL 1 1/4 1 11/16-12 2 0.41 24 WLNL 1 1/2 2-12 2 3/8 0.41 TUBEFITTINGPART #END SIZEDTUBE ENDUN/UNF-2BH2(mm)S4HEX(mm)STANDARDMATERIALFROM STOCK(mm) (in.) S SS4WLNML 6 1/4 9/16-18 7 22 6WLNML 8,10 3/8 11/16-16 8 27 8WLNML 12 1/2 13/16-16 9 30 10WLNML 14,15,16 5/8 1-14 10.5 36 12WLNML 18,20 3/4 1 3/16-12 10.5 41 16WLNML 22,25 1 1 7/16-12 10.5 46 20WLNML 28,30,32 1 1/4 1 11/16-12 10.5 50 24WLNML 35,38 1 1/2 2-12 10.5 60 TUBEFITTINGPART #ENDSIZE(in.)ADIA(in.)B(in.)C(in.)E(in.)STANDARDMATERIALFROM STOCK-S -SS4SBR 1/4 0.260 - - 0.05 6SBR 3/8 0.390 0.07 0.03 - 8SBR 1/2 0.515 0.07 0.03 - 10SBR 5/8 0.640 0.07 0.03 - 12SBR 3/4 0.765 0.08 0.04 - 14SBR 7/8 0.890 - - 0.0616SBR 1 1.015 0.08 0.04 - 20SBR 1 1/4 1.265 0.08 0.04 - 24SBR 1 1/2 1.515 0.08 0.04 - 32SBR 2 2.015 - - 0.09 TUBEFITTINGPART #END SIZE(mm)ADIA(mm)E(mm)STANDARDMATERIALFROM STOCK-S -SSSBR6 6 6.4 1.2 SBR8 8 8.4 1.2 SBR10 10 10.4 1.2 SBR12 12 12.4 1.2 SBR14 14 14.4 1.2SBR15 15 15.4 1.2 SBR16 16 16.4 1.2 SBR18 18 18.4 1.2 SBR20 20 20.4 1.6 SBR22 22 22.4 1.6SBR25 25 25.4 1.6 SBR28 28 28.4 1.6SBR30 30 30.4 1.6 SBR32 32 32.4 1.6SBR35 35 35.4 1.6SBR38 38 38.4 1.6 SBR42 42 42.4 1.6SBR50 50 50.4 2.4A13Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.HMLOUnion - mm HexORFS / ORFSSO 8434-3 SSAE 52M0101WLOBulkhead UnionORFS / ORFSSAE 520601WLO-WLNL Body with Locknut (See page A12 for WLNL)* Sizes 14 and 32 are not included in SAE J1453.** W - Bulkhead pilot diameter. Recommended clearance hole is W + 0.015".HLOUnionORFS / ORFSSAE 520101* Sizes 14 and 32 are not included in SAE J1453.TUBEFITTINGPART #END SIZEFF(in.)HHEX(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2(in.) -S -SS4 HLO 1/4 1/4 1.08 5/8 9.2 9.26 HLO 3/8 3/8 1.22 3/4 9.2 9.26-4 HLO 3/8 1/4 1.17 3/4 9.28 HLO 1/2 1/2 1.39 7/8 9.2 9.28-6 HLO 1/2 3/8 1.33 7/8 9.210 HLO 5/8 5/8 1.68 1 1/16 6.0 6.010-8 HLO 5/8 1/2 1.57 1 1/16 6.012 HLO 3/4 3/4 1.85 1 1/4 6.0 6.012-10 HLO 3/4 5/8 1.80 1 1/4 6.014 HLO* 7/8 7/8 1.87 1 3/816 HLO 1 1 1.94 1 1/2 6.0 6.016-12 HLO 1 3/4 1.92 1 1/2 6.020 HLO 1 1/4 1 1/4 2.02 1 3/4 6.024 HLO 1 1/2 1 1/2 2.09 2 1/8 5.0 5.032 HLO* 2 2 2.87 2 3/4 3.0TUBEFITTINGPART #END SIZEL6(mm)S1HEX(mm)STANDARDDynamicPressure(x 1,000 PSI) 1 & 2(mm) (in.) S SS4HMLO 6 1/4 27.5 14 9.26HMLO 8,10 3/8 31 19 9.28HMLO 12 1/2 35.5 22 9.210HMLO 14,15,16 5/8 42.5 27 6.012HMLO 18,20 3/4 47 32 6.016HMLO 22,25 1 49.5 41 6.020HMLO 28,30,32 1 1/4 51.5 46 6.024HMLO 35,38 1 1/2 53 55 5.0TUBEFITTINGPART #ENDSIZE(in.)BHEX(in.)EMAX(in.)GG(in.)SS (in.)WDIA(in.)WW(in.)STANDARDDynamicPressure(x 1,000 PSI)-S -SS4 WLO 1/4 13/16 0.53 1.90 0.06 0.56 1.24 9.2 9.26 WLO 3/8 1 0.53 2.09 0.06 0.69 1.34 9.2 9.28 WLO 1/2 1 1/8 0.53 2.30 0.06 0.81 1.44 9.2 9.210 WLO 5/8 1 5/16 0.52 2.62 0.06 1.00 1.60 6.012 WLO 3/4 1 1/2 0.50 2.72 0.06 1.19 1.64 6.0 6.014 WLO 7/8 1 5/8 0.51 2.76 0.06 1.31 1.6616 WLO 1 1 3/4 0.51 2.76 0.06 1.44 1.66 6.0 6.020 WLO 1 1/4 2 0.51 2.76 0.06 1.69 1.66 6.024 WLO 1 1/2 2 3/8 0.51 2.76 0.06 2.00 1.66 5.02A14Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 CatalogSeal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.WMLOBulkhead Union - mm HexORFS / ORFSSO 8434-3 BHSSAE 52M0601WMLO-WLNML - Body with Locknut(See page A12 for WLNML)WF5OLOStraight Thread BulkheadConnectorORFS / SAE-ORBWF5OLO-WLNL - Body with Locknut(See page A12 for WLNL)* E - Maximum bulkhead thickness.**d27- Bulkhead pilot diameter.Recommended clearance hole is d27 + 0.4 mm* E - Maximum bulkhead thickness.** W - Bulkhead pilot diameter. Recommended clearance hole is W + 0.015".TUBEFITTINGPART #END SIZEBHEX(in.)EMAX(in.)HHEX(in.)L(in.)SS(in.)WDIA(in.)WW(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2UN/UNF-2A -S -SS4 WF5OLO 1/4 7/16-20 13/16 0.53 13/16 2.14 0.06 0.56 1.24 9.24-6 WF5OLO 1/4 9/16-18 13/16 0.53 13/16 2.18 0.06 0.56 1.246 WF5OLO 3/8 9/16-18 1 0.53 1 2.31 0.06 0.69 1.34 9.28 WF5OLO 1/2 3/4-16 1 1/8 0.53 1 1/8 2.60 0.06 0.81 1.44 9.210 WF5OLO 5/8 7/8-14 1 5/16 0.52 1 5/16 2.69 0.06 1.00 1.60 6.012 WF5OLO 3/4 1 1/16-12 1 1/2 0.50 1 1/2 2.89 0.06 1.19 1.64 6.0TUBEFITTINGPART #END SIZEd27**(mm)E(mm)I2(mm)I4(mm)L15(mm)S4HEX(mm)STANDARDDynamicPressure(x 1,000 PSI) 1 & 2(mm) (in.) S SS4WMLO 6 1/4 14.3 14 31.5 1.5 48 22 9.26WMLO 8,10 3/8 17.5 14 34 1.5 53 27 9.28WMLO 12 1/2 20.6 14 36.5 2.5 58.5 30 9.210WMLO 14,15,16 5/8 25.4 14 40.5 2.5 66.5 36 6.012WMLO 18,20 3/4 30.2 14 41.5 3 69 41 6.016WMLO 22,25 1 36.5 14 42 3 70 46 6.020WMLO 28,30,32 1 1/4 42.9 14 42 3 70 50 6.024WMLO 35,38 1 1/2 50.8 14 42 3 70 60 5.0A15Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.F5OLOStraight Thread ConnectorORFS / SAE-ORBSAE 520120FF5OLOLong Straight Thread ConnectorORFS-Long / SAE-ORBSAE 521720 (previously 520122)G5LOFemale Straight Thread ConnectorORFS / SAE-ORBFLOMale Pipe ConnectorORFS / NPTF* Sizes 14 and 32 are not included in SAE J1453.TUBEFITTINGPART #END SIZEHHEX(in.)L5(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2UN/UNF-2A -S -SS4 F5OLO 1/4 7/16-20 5/8 1.13 9.2 9.24-5 F5OLO 1/4 1/2-20 5/8 1.13 9.24-6 F5OLO 1/4 9/16-18 3/4 1.20 9.2 9.24-8 F5OLO 1/4 3/4-16 7/8 1.32 9.26 F5OLO 3/8 9/16-18 3/4 1.25 9.2 9.26-4 F5OLO 3/8 7/16-20 3/4 1.34 9.2 9.26-5 F5OLO 3/8 1/2-20 3/4 1.22 9.26-8 F5OLO 3/8 3/4-16 7/8 1.38 9.2 9.26-10 F5OLO 3/8 7/8-14 1 1.53 9.2 9.26-12 F5OLO 3/8 1 1/16-12 1 1/4 1.688 F5OLO 1/2 3/4-16 7/8 1.44 9.2 9.28-4 F5OLO 1/2 7/16-20 7/8 1.43 9.28-6 F5OLO 1/2 9/16-18 7/8 1.47 6.0 9.28-10 F5OLO 1/2 7/8-14 1 1.59 6.08-12 F5OLO 1/2 1 1/16-12 1 1/4 1.75 6.0 6.08-16 F5OLO 1/2 1 5/16-12 1 1/2 1.79 6.010 F5OLO 5/8 7/8-14 1 1/16 1.70 6.0 6.010-6 F5OLO 5/8 9/16-18 1 1/16 1.65 6.010-8 F5OLO 5/8 3/4-16 1 1/16 1.78 6.010-12 F5OLO 5/8 1 1/16-12 1 1/4 1.86 6.010-16 F5OLO 5/8 1 5/16-12 1 1/2 1.90 6.012 F5OLO 3/4 1 1/16-12 1 1/4 1.92 6.0 6.012-8 F5OLO 3/4 3/4-16 1 1/4 1.91 6.0 6.012-10 F5OLO 3/4 7/8-14 1 1/4 1.99 6.0 6.012-16 F5OLO 3/4 1 5/16-12 1 1/2 1.96 6.0 6.014 F5OLO* 7/8 1 3/16-12 1 3/8 1.9116 F5OLO 1 1 5/16-12 1 1/2 1.98 6.0 6.016-10 F5OLO 1 7/8-14 1 1/2 2.04 6.016-12 F5OLO 1 1 1/16-12 1 1/2 2.14 6.016-20 F5OLO 1 1 5/8-12 1 7/8 2.06 6.0 6.020 F5OLO 1 1/4 1 5/8-12 1 7/8 2.06 6.0 6.020-16 F5OLO 1 1/4 1 5/16-12 1 7/8 2.28 6.0 6.020-24 F5OLO 1 1/4 1 7/8-12 2 1/8 2.13 5.024 F5OLO 1 1/2 1 7/8-12 2 1/8 2.13 5.0 5.024-20 F5OLO 1 1/2 1 5/8-12 2 1/8 2.35 5.032 F5OLO* 2 2 1/2-12 2 3/4 2.32 3.0TUBEFITTINGPART #END SIZEHHEX(in.)L6(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2UN/UNF-2A -S -SS4 FF5OLO 1/4 7/16-20 5/8 2.07 9.2 9.26 FF5OLO 3/8 9/16-18 3/4 2.27 9.28 FF5OLO 1/2 3/4-16 7/8 2.68 9.2 9.210 FF5OLO 5/8 7/8-14 1 1/16 3.13 6.012 FF5OLO 3/4 1 1/16-12 1 1/4 3.76 6.016 FF5OLO 1 1 5/16-12 1 1/2 4.14 6.020 FF5OLO 1 1/4 1 5/8-12 1 7/8 4.76 6.024 FF5OLO 1 1/2 1 7/8-12 2 1/8 5.26 5.0TUBEFITTINGPART #END SIZEHHEX(in.)L(in.)STANDARDDynamicPressure(x 1,000 PSI)1UN/UNF-2A2UN/UNF-2B -S -SS4 G5LO 9/16-18 7/16-20 3/4 1.10 6.06-4 G5LO 11/16-16 7/16-20 3/4 1.08 6.08-4 G5LO 13/16-16 7/16-20 7/8 0.78 6.0TUBEFITTINGPART #END SIZEFF(in.)HHEX(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2NPTF -S -SS4 FLO 1/4 1/8-27 1.07 5/8 6.0 6.04-4 FLO 1/4 1/4-18 1.26 5/8 6.0 6.04-6 FLO 1/4 3/8-18 1.32 3/4 6.0 6.04-8 FLO 1/4 1/2-14 1.52 7/8 6.06 FLO 3/8 1/4-18 1.25 3/4 6.0 6.06-6 FLO 3/8 3/8-18 1.34 3/4 6.0 6.06-8 FLO 3/8 1/2-14 1.55 7/8 6.0 6.08 FLO 1/2 3/8-18 1.48 7/8 6.0 6.08-4 FLO 1/2 1/4-18 1.48 7/8 6.0 6.08-8 FLO 1/2 1/2-14 1.64 7/8 6.0 6.08-12 FLO 1/2 3/4-14 1.69 1 1/8 6.0 6.010 FLO 5/8 1/2-14 1.82 1 1/16 6.0 6.010-6 FLO 5/8 3/8-18 1.63 1 1/1610-12 FLO 5/8 3/4-14 1.82 1 1/8 5.512 FLO 3/4 3/4-14 1.93 1 1/4 5.5 6.012-8 FLO 3/4 1/2-14 1.93 1 1/4 6.012-16 FLO 3/4 1-11 1/2 2.13 1 3/8 4.514 FLO 7/8 3/4-14 2.00 1 3/816 FLO 1 1-11 1/2 2.19 1 1/2 4.5 4.516-12 FLO 1 3/4-14 2.00 1 1/2 5.5 5.516-20 FLO 1 1 1/4-11 1/2 2.30 1 3/4 3.020 FLO 1 1/4 1 1/4-11 1/2 2.30 1 7/8 3.0 4.020-16 FLO 1 1/4 1-11 1/2 2.27 1 7/8 4.524 FLO 1 1/2 1 1/2-11 1/2 2.40 2 1/8 3.0 3.032 FLO 2 2-11 1/2 2.79 2 3/4 1.8LA16Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 CatalogSeal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.GLOFemale Pipe ConnectorORFS / Female PipeF87OMLOMetric Straight Thread ConnectorORFS / SO 6149SO 8434-3 SDSSAE 52M0187F82EDMLOMale Connector - Metric (for SO 9974-1 Port)ORFS / Metric-ED* M38X2 is not included in SO 6149.F42EDMLOMale Connector - BSPP (for SO 1179-1 Port)ORFS / BSPP-EDTUBEFITTINGPART #END SIZEFF(in.)HHEX(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2NPTF -S -SS4-4 GLO 1/4 1/4-18 1.25 3/4 6.06 GLO 3/8 1/4-18 1.30 3/4 6.08-4 GLO 1/2 1/4-18 1.20 7/8 6.0TUBEFITTINGPART #END SIZEL8(mm)S3HEX(mm)STANDARDDynamicPressure(x 1,000 PSI) 1 2(mm) (in.) SO 261 S SS4M12F87OMLO 6 1/4 M12X1.5 28.5 17 9.24M14F87OMLO 6 1/4 M14X1.5 29.5 19 9.26M12F87OMLO 8,10 3/8 M12X1.5 32 19 9.26M14F87OMLO 8,10 3/8 M14X1.5 32 19 9.26M16F87OMLO 8,10 3/8 M16X1.5 33.5 22 9.26M18F87OMLO 8,10 3/8 M18X1.5 36 24 9.28M14F87OMLO 12 1/2 M14X1.5 35 22 9.28M16F87OMLO 12 1/2 M16X1.5 36.5 24 9.28M18F87OMLO 12 1/2 M18X1.5 38 24 9.28M22F87OMLO 12 1/2 M22X1.5 39.5 27 6.08M27F87OMLO 12 1/2 M27X2 44 32 6.010M18F87OMLO 14,15,16 5/8 M18X1.5 41 27 6.010M22F87OMLO 14,15,16 5/8 M22X1.5 42 27 6.010M27F87OMLO 14, 15, 16 5/8 M27x2 47 32 6.012M22F87OMLO 18,20 3/4 M22X1.5 45 32 6.012M27F87OMLO 18,20 3/4 M27X2 48.5 32 6.012M33F87OMLO 18,20 3/4 M33X2 51.5 41 6.016M33F87OMLO 22,25 1 M33X2 52 41 6.020M38F87OMLO* 28,30,32 1 1/4 M38X2 53 46 6.020M42F87OMLO 28,30,32 1 1/4 M42X2 54.5 50 5.024M48F87OMLO 35,38 1 1/2 M48X2 57 55 5.0TUBEFITTINGPART #END SIZECHEX(mm)L(mm)STANDARDDynamicPressure(x 1,000 PSI) 1 2(mm) (in.) BSPP S SS4F42EDMLO 6 1/4 1/8 - 28 17 25.7 9.24-4F42EDMLO 6 1/4 1/4 - 19 19 30.9 9.24-6F42EDMLO 6 1/4 3/8 - 19 22 31.6 9.24-8F42EDMLO 6 1/4 1/2 - 14 27 38.4 6.06F42EDMLO 8,10 3/8 1/4 - 19 19 31.9 9.26-2F42EDMLO 8,10 3/8 1/8 - 28 19 31.1 9.26-6F42EDMLO 8,10 3/8 3/8 - 19 22 33 9.26-8F42EDMLO 8,10 3/8 1/2 - 14 27 38.5 6.06-12F42EDMLO 8,10 3/8 3/4 - 14 32 40.3 6.08F42EDMLO 12 1/2 3/8 - 19 22 34.6 9.28-4F42EDMLO 12 1/2 1/4 - 19 22 36.7 9.28-8F42EDMLO 12 1/2 1/2 - 14 27 40.1 6.08-12F42EDMLO 12 1/2 3/4 - 14 32 41.9 6.010F42EDMLO 14,15,16 5/8 1/2 - 14 27 41.1 6.010-6F42EDMLO 14,15,16 5/8 3/8 - 19 27 42.4 9.210-12F42EDMLO14,15,16 5/8 3/4 - 14 32 44.3 6.010-16F42EDMLO14,15,16 5/8 1 - 11 41 47.812F42EDMLO 18,20 3/4 3/4 - 14 32 46.1 6.012-8F42EDMLO 18,20 3/4 1/2 - 14 32 48.5 6.012-16F42EDMLO 18,20 3/4 1 - 11 41 47.5 6.012-20F42EDMLO 18,20 3/4 1 1/4 - 11 50 53.5 6.016F42EDMLO 22,25 1 1 - 11 41 49.8 6.016-12F42EDMLO 22,25 1 3/4 - 14 38 50.3 6.016-20F42EDMLO 22,25 1 1 1/4 - 11 50 53.8 6.016-24F42EDMLO 22,25 1 1 1/2 - 11 55 57.5 5.020F42EDMLO 28,30,32 1 1/4 1 1/4 - 11 50 53.8 6.020-16F42EDMLO28,30,32 1 1/4 1 - 11 48 57.3 6.020-24F42EDMLO28,30,32 1 1/4 1 1/2 - 11 55 57.6 5.024F42EDMLO 38 1 1/2 1 1/2 - 11 55 57.6 5.0TUBEFITTINGPART #END SIZECHEX(mm)L5(mm)STANDARDDynamicPressure(x 1,000 PSI) 1 2(mm) (in.) Metric S SS4M12F82EDMLO 6 1/4 M12X1.5 17 29.7 9.26M14F82EDMLO 8, 10 3/8 M14X1.5 22 32 9.26M16F82EDMLO 8,10 3/8 M16X1.5 22 32 9.28M18F82EDMLO 12 1/2 M18X1.5 24 34.6 9.210M22F82EDMLO 14,15,16 5/8 M22X1.5 27 41.1 6.012M27F82EDMLO 18,20 3/4 M27X2 32 46.1 6.016M33F82EDMLO 22,25 1 M33X2 41 49.8 6.020M42F82EDMLO 28,30,32 1 1/4 M42X2 50 53.8A17Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.LHP {nch]Flange - Seal Connector Tube-to-TubeLHMP {Metric]Flange - Seal Connector Tube-to-TubeLHP {nch]Flange - Seal Connector Tube-to-HoseLHMP {Metric]Flange - Seal Connector Tube-to-HoseSee page O3 for the required PLS bonded seal.For availability of Parfange tooling, please contact the Tube Fittings Division.See page O3 for the required PLS bonded seal.For availability of Parfange tooling, please contact the Tube Fittings Division.See page O3 for the required PLS bonded seal.For availability of Parfange tooling, please contact the Tube Fittings Division.See page O3 for the required PLS bonded seal.For availability of Parfange tooling, please contact the Tube Fittings Division.TUBEFITTINGPART #ENDSIZEHHEX(in.)L(in.)Max. Tube WaII Thickness(in.)STANDARDDynamicPressure(x 1,000 PSI)1 & 2(in.) -S -SS4 LHP 1/4 5/8 0.59 0.049 6.06 LHP 3/8 3/4 0.69 0.065 5.08 LHP 1/2 7/8 0.79 0.095 5.510 LHP 5/8 1 1/16 0.95 0.095 4.512 LHP 3/4 1 1/4 1.00 0.120 4.516 LHP 1 1 1/2 1.02 0.120 3.5TUBE FITTING PART #DASH SIZEEND SIZEL (mm)S HEX (mm)Max. TubeWaII Thickness (mm)STANDARD DynamicPressure(x 1,000 PSI)1 & 2 (mm) S SS BLHMPS6 4 6 15 17 1LHMPS8 6 8 17.5 19 1.5LHMPS10 6 10 17.5 19 1.5LHMPS12 8 12 20 22 2LHMPS16 10 16 24 27 2LHMPS20 12 20 25.5 32 2.5TUBE FITTING PART #END SIZEH HEX (in.)L (in.)Max. TubeWaII Thickness (in.)STANDARD DynamicPressure(x 1,000 PSI)1 & 2 (in.) -S -SS -B4 LHP 1/4 5/8 0.59 0.065 6.06 LHP 3/8 3/4 0.69 0.083 6.08 LHP 1/2 7/8 0.79 0.120 6.010 LHP 5/8 1 1/16 0.95 0.120 6.012 LHP 3/4 1 1/4 1.00 0.134 5.516 LHP 1 1 1/2 1.02 0.120 3.5TUBE FITTING PART #DASH SIZEEND SIZEL (mm)S HEX (mm)Max. TubeWaII Thickness (mm)STANDARD DynamicPressure(x 1,000 PSI)1 & 2 (mm) S SS BLHMPS6 4 6 15 17 1.5LHMPS8 6 8 17.5 19 2LHMPS10 6 10 17.5 19 2LHMPS12 8 12 20 22 2.5LHMPS16 10 16 24 27 3LHMPS20 12 20 25.5 32 3.5A18Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 CatalogSeal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.MMLOHBSBraze ConnectorORFS / Braze SocketSO 8434-3 BRSSAE 52M0104* D5 is for silver brazing. Standard steel parts are not recommended for welding.LOHTSTube Stub Connector ORFS / Tube WeldLOHBSBraze ConnectorORFS / Braze SocketSAE 520104* E is for silver brazing. Standard steel parts are not recommended for welding.** Size 14 is not included in SAE J1453.* Contact Tube Fittings Division for pressure ratings.TUBEFITTINGPART #END SIZED5*DIATUBESOCKETL22(mm)L26(mm)S1HEXSTANDARDDynamicPressure(x 1,000 PSI) 1 2(mm) (in.) (mm) S SS4-6MMLOHB3 6 1/4 6 6.15 13.5 22 17 9.24-8MMLOHB3 6 1/4 8 8.15 13.5 22 17 9.26-10MMLOHB3 8, 10 3/8 10 10.15 14.5 23 19 9.28-12MMLOHB3 12 1/2 12 12.15 16 24.5 22 9.210-16MMLOHB3 14, 15, 16 5/8 16 16.15 19 27.5 27 6.012-20MMLOHB3 18, 20 3/4 20 20.18 21 33.5 32 6.016-25MMLOHB3 22, 25 1 25 25.18 24.5 38.5 41 6.020-30MMLOHB3 28, 30, 32 1 1/4 30 30.2 24.5 38.5 46 6.024-38MMLOHB3 35, 38 1 1/2 38 38.2 24.5 38.5 55 5.0TUBEFITTINGPART #END SIZEDD(in.)EDIA(in.)HHEX(in.)L(in.)STANDARDMATERIALFROM STOCK1 & 2(in.) -S -SS*4 LOHT3 1/4 0.88 0.25 5/8 1.58 6 LOHT3 3/8 0.88 0.38 3/4 1.67 8 LOHT3 1/2 1.00 0.50 7/8 1.89 12 LOHT3 3/4 1.16 0.75 1 1/4 2.35 16 LOHT3 1 1.13 1.00 1 1/2 2.40 TUBEFITTINGPART #END SIZEDD(in.)E*DIA(in.)HHEX(in.)L1(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2(in.) -S -SS4 LOHB3 1/4 1/4 0.52 0.26 5/8 0.86 9.24-6 LOHB3 1/4 3/8 0.52 0.38 5/8 0.86 9.26 LOHB3 3/8 3/8 0.56 0.38 3/4 0.90 9.26-4 LOHB3 3/8 1/4 0.56 0.26 3/4 0.90 9.26-8 LOHB3 3/8 1/2 0.56 0.51 3/4 0.90 9.28 LOHB3 1/2 1/2 0.63 0.51 7/8 0.97 9.28-4 LOHB3 1/2 1/4 0.64 0.26 7/8 0.97 9.28-6 LOHB3 1/2 3/8 0.63 0.38 7/8 0.97 9.28-10 LOHB3 1/2 5/8 0.63 0.63 7/8 0.97 6.08-12 LOHB3 1/2 3/4 0.67 0.76 1 1/16 1.16 6.010 LOHB3 5/8 5/8 0.73 0.63 1 1/16 1.07 6.010-6 LOHB3 5/8 3/8 0.73 0.38 1 1/16 1.07 6.010-8 LOHB3 5/8 1/2 0.73 0.51 1 1/16 1.07 6.010-12 LOHB3 5/8 3/4 0.74 0.76 1 1/16 1.23 6.012 LOHB3 3/4 3/4 0.83 0.76 1 1/4 1.32 6.012-8 LOHB3 3/4 1/2 0.83 0.51 1 1/4 1.16 6.012-10 LOHB3 3/4 5/8 0.83 0.63 1 1/4 1.16 6.012-16 LOHB3 3/4 1 0.83 1.01 1 1/2 1.38 6.014 LOHB3** 7/8 7/8 0.97 0.88 1 3/8 1.5216 LOHB3 1 1 0.97 1.01 1 1/2 1.52 6.016-8 LOHB3 1 1/2 0.97 0.51 1 1/2 1.30 6.016-12 LOHB3 1 3/4 0.97 0.76 1 1/2 1.46 6.016-20 LOHB3 1 1 1/4 0.97 1.26 1 3/4 1.52 6.020 LOHB3 1 1/4 1 1/4 0.97 1.26 1 3/4 1.52 6.020-16 LOHB3 1 1/4 1 0.97 1.01 1 3/4 1.52 6.020-24 LOHB3 1 1/4 1 1/2 0.97 1.51 2 1/8 1.52 5.024 LOHB3 1 1/2 1 1/2 0.97 1.51 2 1/8 1.52 5.024-20 LOHB3 1 1/2 1 1/4 0.97 1.26 2 1/8 1.52 5.0A19Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.TRLONTube End ReducerORFS Swivel / ORFS Tube EndSAE 520123 (body only)SAE 520123A (body with large nut)** Assembled with Large BL Nut* Assembled with crimp nut. ** Assembled with large BL nut. ***To order reducer without large nut (body only) remove the "N" from the part number (i.e., TRLO).* Assembled withCrimp NutTUBEFITTINGPART #END SIZEF(in.)HHEX(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2(in.) -S -SS4 LOHL6 1/4 1/4 1.33 5/8 9.26 LOHL6 3/8 3/8 1.44 3/4 9.26-4LOHL6 1/4 3/8 1.37 3/4 9.28 LOHL6 1/2 1/2 1.67 7/8 9.28-6 LOHL6 3/8 1/2 1.62 7/8 9.210-8 LOHL6 1/2 5/8 1.81 1 1/16 6.012-10 LOHL6 5/8 3/4 1.99 1 1/4 6.016-12 LOHL6 3/4 1 2.16 1 1/2 6.020-16 LOHL6 1 1 1/4 2.28 1 3/4 5.024-20 LOHL6 1 1/4 1 1/2 2.35 2 1/8 4.0LOHL6Tube End Extender / ExpanderORFS / ORFS SwivelTUBEFITTINGPART #END SIZEFF(in.)HHEX(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2(in.) -S -SS4 HL6 1/4 1/4 1.59 5/8 9.26 HL6 3/8 3/8 1.77 3/4 9.28 HL6 1/2 1/2 2.12 7/8 9.210 HL6 5/8 5/8 2.42 1 1/16 6.012 HL6 3/4 3/4 2.74 1 1/4 6.016 HL6 1 1 2.95 1 7/16 6.020 HL6 1 1/4 1 1/4 3.12 1 3/424 HL6 1 1/2 1 1/2 3.33 2 1/8HL6Swivel Nut UnionORFS Swivel / ORFS SwivelTUBE FITTING PART #END SIZEF(in.)STANDARDDynamicPressure(x 1,000 PSI)TRLON TRLON TRLO*Crimp Nut StyIe**Large BL Nut StyIe***Body OnIy (For StyIe that Uses Large BL Nut)1(in.)2(in.) -S -SS6-4 TRLON - - 3/8 1/4 0.77 9.2 9.2- 8-4 TRLON 8-4 TRLO 1/2 1/4 0.86 9.2 9.28-6 TRLON - - 1/2 3/8 0.88 9.2 9.2- 10-4 TRLON 10-4 TRLO 5/8 1/4 0.90 6.0- 10-6 TRLON 10-6 TRLO 5/8 3/8 0.95 6.0- 10-8 TRLON 10-8 TRLO 5/8 1/2 1.02 6.0 6.0- 12-4 TRLON 12-4 TRLO 3/4 1/4 0.98 6.0- 12-6 TRLON 12-6 TRLO 3/4 3/8 1.03 6.0 6.0- 12-8 TRLON 12-8 TRLO 3/4 1/2 1.09 6.0 6.012-10 TRLON - - 3/4 5/8 1.16 6.0- 16-8 TRLON 16-8 TRLO 1 1/2 1.15 6.0 6.0- 16-10 TRLON 16-10 TRLO 1 5/8 1.26 6.016-12 TRLON - - 1 3/4 1.30 6.0 6.0- 20-12 TRLON 20-12 TRLO 1 1/4 3/4 1.32 5.0 5.020-16 TRLON - - 1 1/4 1 1.51 5.0- 24-16 TRLON 24-16 TRLO 1 1/2 1 1.23 4.0 4.0- 24-20 TRLON 24-20 TRLO 1 1/2 1 1/4 1.35 4.0- 32-20 TRLON 32-20 TRLO 2 1 1/4 1.42 3.0- 32-24 TRLON 32-24 TRLO 2 1 1/2 1.42 3.0A20Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 CatalogSeal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.G65LStraight Thread SwivelFemale ConnectorORFS Swivel / SAE-ORBF6LPipe Thread SwivelConnectorORFS Swivel / NPTFG6LFemale Pipe Thread SwivelConnectorORFS Swivel / NPTFF65OLStraight Thread Swivel ConnectorORFS Swivel / SAE-ORBSAE 520181TUBEFITTINGPART #END SIZEHHEX(in.)L5(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2UN/UNF-2A -S -SS4 F65OL 1/4 7/16-20 5/8 1.46 9.26 F65OL 3/8 9/16-18 3/4 1.58 9.28 F65OL 1/2 3/4-16 7/8 1.95 9.210 F65OL 5/8 7/8-14 1 1/16 2.13 6.012 F65OL 3/4 1 1/16-12 1 1/4 2.34 6.016 F65OL 1 1 5/16-12 1 1/2 2.66 6.020 F65OL 1 1/4 1 5/8-12 1 7/8 2.66 5.0TUBEFITTINGPART #END SIZEHHEX(in.)L5(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2UN/UNF-2B -S -SS4 G65L 1/4 7/16-20 3/4 1.38 6.04-6 G65L 1/4 9/16-18 13/16 1.456-4 G65L 3/8 7/16-20 3/4 1.51 6.08-4 G65L 1/2 7/16-20 7/8 1.57 6.08-6 G65L 1/2 9/16-18 7/8 1.612 G65L 3/4 1 1/16-12 1 3/8 2.2716-4 G65L 1 7/16-20 1 3/8 1.5524-4 G65L 2 7/16-20 2 1.84TUBEFITTINGPART #END SIZEFF(in.)HHEX(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2NPTF -S -SS4 F6L 1/4 1/8-27 1.33 5/8 6.04-4 F6L 1/4 1/4-18 1.52 5/8 6.06 F6L 3/8 1/4-18 1.69 3/4 6.06-6 F6L 3/8 3/8-18 1.67 3/4 6.08 F6L 1/2 3/8-18 1.95 3/4 6.08-8 F6L 1/2 1/2-14 2.14 7/8 6.010 F6L 5/8 1/2-14 2.29 1 1/16 6.012 F6L 3/4 3/4-14 2.37 1 1/4 5.516 F6L 1 1-11 1/2 2.87 1 1/2 4.5TUBEFITTINGPART #END SIZEFF(in.)H(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2NPTF -S -SS4-4 G6L 1/4 1/4-18 1.48 3/4 6.06 G6L 3/8 1/4-18 1.60 7/8 6.08-4 G6L 1/2 1/4-18 1.75 7/8 6.0A21Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.F687OMLSwivel SO 6149 ConnectorORFS Swivel / SO 6149F682EDMLSwivel Metric ConnectorORFS Swivel / Metric-EDF642EDMLSwivel BSPP ConnectorORFS Swivel / BSPP-EDWNLO45 Bulkhead Union ElbowORFS / ORFSSAE 520801 WNLO-WLNL - Body with Locknut (See page A12 for WLNL)* JJ - Across wrench fats.** E - Maximum bulkhead thickness.*** W - Bulkhead pilot diameter. Recommended clearnace hole is W + 0.015".TUBEFITTINGPART #END SIZEL8(mm)S3HEX(mm)STANDARDDynamicPressure(x 1,000 PSI) 1 2(mm) (in.) SO 261 S SS4M12F687OML 6 1/4 M12x1.5 37 17 9.26M12F687OML 8, 10 3/8 M12x1.5 39.2 19 9.26M14F687OML 8, 10 3/8 M14x1.5 39.2 19 9.26M16F687OML 8, 10 3/8 M16x1.5 43.5 22 9.28M16F687OML 12 1/2 M16x1.5 47.8 22 9.210M22F687OML14, 15, 16 5/8 M22x1.5 53 2710M27F687OML14, 15, 16 5/8 M27x2 57 3212M27F687OML 18, 20 3/4 M27x2 59.5 32 6.016M33F687OML 22, 25 1 M33x2 67.5 41 6.0TUBEFITTINGPART #END SIZEL8(mm)S1HEX(mm)STANDARDDynamicPressure(x 1,000 PSI) 1 2(mm) (in.) Metric S SS4M12F682EDML 6 1/4 M12x1.5 38.2 17 9.26M14F682EDML 8, 10 3/8 M14x1.5 40.2 198M16F682EDML 12 1/2 M16x1.5 47.3 2210M22F682EDML14, 15, 16 5/8 M22X1.5 51.8 27 6.012M27F682EDML 18, 20 3/4 M27X2 57.2 3216M33F682EDML 22, 25 1 M33X2 67 41 6.0TUBEFITTINGPART #END SIZEL8(mm)S1HEX(mm)STANDARDDynamicPressure(x 1,000 PSI) 1 2(mm) (in.) BSPP S SS6F642EDML 8, 10 3/8 1/4 40.2 19 9.28F642EDML 12 1/2 3/8 47.3 22 9.210F642EDML 14, 15, 16 5/8 1/2 51.8 27 6.012F642EDML 18, 20 3/4 3/4 57.2 32 6.016F642EDML 22, 25 1 1 67 46TUBEFITTINGPART #END SIZEBHEX(in.)EMAX(in.)JJ(in.)P(in.)SS(in.)WDIA(in.)WW(in.)ZZ(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2(in.) -S -SS4 WNLO 1/4 1/4 13/16 0.53 9/16 0.63 0.06 0.56 1.24 1.73 9.26 WNLO 3/8 3/8 1 0.53 3/4 0.74 0.06 0.69 1.34 1.91 9.28 WNLO 1/2 1/2 1 1/8 0.53 3/4 0.80 0.06 0.81 1.44 2.01 9.210 WNLO 5/8 5/8 1 5/16 0.52 1 1/16 0.92 0.06 1.00 1.60 2.23 6.012 WNLO 3/4 3/4 1 1/2 0.50 1 3/16 1.02 0.06 1.19 1.64 2.39 6.016 WNLO 1 1 1 3/4 0.51 1 7/16 1.18 0.06 1.44 1.66 2.56 6.020 WNLO 1 1/4 1 1/4 2 0.51 1 5/8 1.26 0.06 1.69 1.66 2.64 5.024 WNLO 1 1/2 1 1/2 2 3/8 0.51 1 7/8 1.45 0.06 2.00 1.66 2.64 4.0A22Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 CatalogSeal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.V6LO45 Swivel Nut ElbowORFS / ORFS SwivelV5OLO45 Straight Thread ElbowORFS / SAE-ORBSAE 520320* JJ - Across Wrench Flats* JJ - Across Hex FlatsVLO45 Male ElbowORFS / NPTF* JJ - Across Wrench Flats**Size 14 is not included in SAE J1453.WNMLO45 Bulkhead Union Elbow - mm HexORFS / ORFSSO 8434-3 BHE45SAE 52M0801 WNMLO-WLNML - Body with Locknut (See page A12 for WLNML)* S2 - Across Wrench Flats.** E - Maximum bulkhead thickness.***d27 - Bulkhead pilot diameter.Recommended clerance hole is d27 + 0.4 mm.TUBEFITTINGPART #END SIZEJJ(in.)N2(in.)P(in.)STANDARDDynamicPressure(x 1,000 PSI)1 & 2(in.) -S -SS4 V6LO 1/4 9/16 0.99 0.63 9.26 V6LO 3/8 3/4 1.12 0.74 9.28 V6LO 1/2 3/4 1.49 0.80 9.210 V6LO 5/8 1 1/16 1.53 0.92 6.012 V6LO 3/4 1 3/16 1.73 1.02 6.016 V6LO 1 1 7/16 1.87 1.18 6.020 V6LO 1 1/4 1 5/8 1.98 1.26 5.024 V6LO 1 1/2 1 7/8 2.06 1.45 4.0TUBEFITTINGPART #END SIZEJJ(in.)P(in.)Q(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2UN/UNF-2A -S -SS4 V5OLO 1/4 7/16-20 9/16 0.63 1.18 6.0 6.04-6 V5OLO 1/4 9/16-18 3/4 0.68 1.30 6.06 V5OLO 3/8 9/16-18 3/4 0.74 1.30 6.0 6.06-4 V5OLO 3/8 7/16-20 3/4 0.74 1.22 6.06-8 V5OLO 3/8 3/4-16 3/4 0.74 1.43 6.08 V5OLO 1/2 3/4-16 3/4 0.80 1.43 6.0 6.08-6 V5OLO 1/2 9/16-18 3/4 0.80 1.27 6.08-10 V5OLO 1/2 7/8-14 3/4 0.82 1.76 6.010 V5OLO 5/8 7/8-14 1 1/16 0.92 1.76 6.0 6.010-8 V5OLO 5/8 3/4-16 1 1/16 0.92 1.59 6.010-12 V5OLO 5/8 1 1/16-12 1 3/16 0.96 1.97 6.012 V5OLO 3/4 1 1/16-12 1 3/16 1.02 1.97 6.0 6.012-10 V5OLO 3/4 7/8-14 1 3/16 1.02 1.81 6.012-16 V5OLO 3/4 1 5/16-12 1 7/16 1.16 2.06 5.514 V5OLO** 7/8 1 3/16-12 1 5/16 1.18 2.0316 V5OLO 1 1 5/16-12 1 7/16 1.18 2.06 5.5 5.516-10 V5OLO 1 7/8-14 1 7/16 1.18 1.8916-12 V5OLO 1 1 1/16-12 1 7/16 1.18 2.03 6.016-20 V5OLO 1 1 5/8-12 1 5/8 1.26 2.11 4.020 V5OLO 1 1/4 1 5/8-12 1 5/8 1.26 2.11 4.0 4.024 V5OLO 1 1/2 1 7/8-12 1 7/8 1.45 2.11 4.0TUBEFITTINGPART #END SIZEJJ(in.)N1(in.)P(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2NPTF -S -SS4 VLO 1/4 1/8-27 9/16 0.64 0.63 6.04-4 VLO 1/4 1/4-18 9/16 0.86 0.68 6.06 VLO 3/8 1/4-18 3/4 0.87 0.74 6.06-6 VLO 3/8 3/8-18 3/4 0.87 0.74 6.08 VLO 1/2 3/8-18 3/4 0.95 0.80 6.08-8 VLO 1/2 1/2-14 7/8 1.17 0.86 6.010 VLO 5/8 1/2-14 1 1/16 1.17 0.92 6.012 VLO 3/4 3/4-14 1 5/16 1.30 1.02 4.016 VLO 1 1-11 1/2 1 7/16 1.48 1.18 3.020 VLO 1 1/4 1 1/4-11 1/2 1 5/8 1.67 1.26 2.5TUBEFITTINGPART #END SIZEd27(mm)E(mm)I2(mm)I4(mm)L12(mm)L18(mm)S2(mm)STANDARDDynamicPressure(x 1,000 PSI) 1 & 2(mm) (in.) S SS4WNMLO 6 1/4 14.3 14 31.5 1.5 16 44 14 9.26WNMLO 8,10 3/8 17.5 14 34 1.5 19 48.5 198WNMLO 12 1/2 20.6 14 36.5 2.5 20.5 51 1910WNMLO 14,15,16 5/8 25.4 14 40.5 2.5 23.5 56.5 2712WNMLO 18,20 3/4 30.2 14 41.5 3 26 60.5 3016WNMLO 22,25 1 36.5 14 42 3 30 65 3620WNMLO 28,30,32 1 1/4 42.9 14 42 3 32 67 41 5.024WNMLO 35,38 1 1/2 50.8 14 42 3 37 67 50A23Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.V87OMLO45 Metric Straight Thread ElbowORFS / SO 6149SO 8434-3 SDE45SAE 52M0387* S2 - Across Hex FlatsV4OMLOMale 45 Elbow - BSPP (for SO 1179-1 Port)ORFS / BSPP-ORR* Y - Across Hex FlatsELOUnion ElbowORFS / ORFSSAE 520201* JJ - Across Wrench Flats** Sizes 14 and 32 are not included in SAE J1453.EMLOUnion Elbow - mm HexORFS / ORFSSO 8434-3 ESAE 52M0201TUBEFITTINGPART #END SIZEL12(mm)L13(mm)S2(mm)STANDARDDynamicPressure(x 1,000 PSI) 1 2(mm) (in.) SO 261 S SS4M12V87OMLO 6 1/4 M12X1.5 16 30 14 6.04M14V87OMLO 6 1/4 M14X1.5 18 31.5 17 6.06M16V87OMLO 8,10 3/8 M16X1.5 19 33.5 17 6.08M18V87OMLO 12 1/2 M18X1.5 20.5 37 19 6.010M22V87OMLO14,15,16 5/8 M22X1.5 23.5 44 27 6.012M27V87OMLO 18,20 3/4 M27X2 26 50.5 27 6.016M33V87OMLO 22,25 1 M33X2 30 52.5 36 5.020M42V87OMLO28,30,32 1 1/4 M42X2 32 54 41 4.024M48V87OMLO 35,38 1 1/2 M48X2 37 56.5 50 4.0TUBEFITTINGPART #END SIZEL7(mm)S2(mm)STANDARDDynamicPressure(x 1,000 PSI) 1 & 2(mm) (in.) S SS4EMLO 6 1/4 21.5 14 9.26EMLO 8,10 3/8 25 19 9.28EMLO 12 1/2 28 19 9.210EMLO 14,15,16 5/8 33.5 27 6.012EMLO 18,20 3/4 37.5 30 6.016EMLO 22,25 1 41.5 36 6.020EMLO 28,30,32 1 1/4 44.5 41 5.024EMLO 35,38 1 1/2 49 50 4.0TUBEFITTINGPART #END SIZEJJ(in.)M(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2(in.) -S -SS4 ELO 1/4 1/4 9/16 0.85 9.2 9.26 ELO 3/8 3/8 3/4 0.98 9.2 9.28 ELO 1/2 1/2 3/4 1.10 9.2 9.210 ELO 5/8 5/8 1 1/16 1.31 6.012 ELO 3/4 3/4 1 3/16 1.47 6.0 6.014 ELO** 7/8 7/8 1 5/16 1.6316 ELO 1 1 1 7/16 1.64 6.0 6.020 ELO 1 1/4 1 1/4 1 5/8 1.76 5.024 ELO 1 1/2 1 1/2 1 7/8 1.92 4.0 4.032 ELO** 2 2 2 1/2 2.76 3.0TUBEFITTINGPART #END SIZEM(mm)N(mm)Y(mm)STANDARDDynamicPressure(x 1,000 PSI) 1 2(mm) (in.) BSPP S SS4V4OMLO 6 1/4 1/8 - 28 16 27.5 14 4.04-4V4OMLO 6 1/4 1/4 - 19 17.5 32 19 4.06V4OMLO 8,10 3/8 1/4 - 19 19 32 19 4.06-6V4OMLO 8,10 3/8 3/8 - 19 19 33.5 19 4.06-8V4OMLO 8,10 3/8 1/2 - 14 19.5 43.5 27 4.08V4OMLO 12 1/2 3/8 - 19 20.5 33.5 19 4.08-8V4OMLO 12 1/2 1/2-14 21 43.5 27 4.010V4OMLO 14,15,16 5/8 1/2 - 14 23.5 43.5 27 4.010-12V4OMLO14,15,16 5/8 3/4 - 14 24.5 46.5 30 4.012V4OMLO 18,20 3/4 3/4 - 14 26 46.5 30 4.012-16V4OMLO 18,20 3/4 1 - 11 26 51 37 4.016V4OMLO 22,25 1 1 - 11 30 51 37 4.0A24Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 CatalogSeal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.WELOBulkhead Union ElbowORFS / ORFSSAE 520701WELO-WLNL - Body with Locknut(See page A12 for WLNL)* JJ - Across wrench fats.** E - Maximum bulkhead thickness.*** W - Bulkhead pilot diameter. Recommended clearance hole is W + 0.015".**** Size 14 is not included in SAE J1453.WEMLOBulkhead Union Elbow - mm HexORFS / ORFSSO 8434-3 BHESAE 52M0701WEMLOWLNML - Body with Locknut(See page A12 for WLNML)TUBEFITTINGPART #END SIZEBHEX(in.)EMAX(in.)JJ(in.)R(in.)S(in.)SS(in.)W(in.)WW(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2(in.) -S -SS4 WELO 1/4 1/4 13/16 0.53 9/16 0.89 1.85 0.06 0.56 1.24 9.26 WELO 3/8 3/8 1 0.53 3/4 1.02 2.05 0.06 0.69 1.34 9.28 WELO 1/2 1/2 1 1/8 0.53 3/4 1.14 2.18 0.06 0.81 1.44 9.210 WELO 5/8 5/8 1 5/16 0.52 1 1/16 1.36 2.48 0.06 1.00 1.60 6.012 WELO 3/4 3/4 1 1/2 0.50 1 3/16 1.52 2.65 0.06 1.19 1.64 6.014 WELO**** 7/8 7/8 1 5/8 0.51 1 7/16 1.67 2.80 0.06 1.31 1.6616 WELO 1 1 1 3/4 0.51 1 7/16 1.67 2.80 0.06 1.44 1.66 6.020 WELO 1 1/4 1 1/4 2 0.51 1 5/8 1.79 2.97 0.06 1.69 1.66 5.024 WELO 1 1/2 1 1/2 2 3/8 0.51 1 7/8 1.95 3.13 0.06 2.00 1.66 4.0TUBEFITTINGPART #END SIZEd27(mm)E(mm)I2(mm)I4(mm)L16(mm)L17(mm)S2(mm)STANDARDDynamicPressure(x 1,000 PSI) 1 & 2(mm) (in.) S SS4WEMLO 6 1/4 14.3 14 31.5 1.5 22.5 47 14 9.26WEMLO 8,10 3/8 17.5 14 34 1.5 26 52 198WEMLO 12 1/2 20.6 14 36.5 2.5 29 55.5 19 9.210WEMLO 14,15,16 5/8 25.4 14 40.5 2.5 34.5 63 27 6.012WEMLO 18,20 3/4 30.2 14 41.5 3 38.5 67 30 6.016WEMLO 22,25 1 36.5 14 42 3 42.5 71 36 6.020WEMLO 28,30,32 1 1/4 42.9 14 42 3 45.5 75.5 41 5.024WEMLO 35,38 1 1/2 50.8 14 42 3 49.5 79.5 50 4.0* S2 - Across wrench fats.** E - Maximum bulkhead thickness.***d27 - Bulkhead pilot diameter.Recommended clearance is d27 + 0.4 mm.A25Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.C6LOSwivel Nut ElbowORFS / ORFS SwivelSAE 520221* JJ - Across Wrench Flats** Size 14 is not included in SAE J1453.C6MLOSwivel Nut Elbow - mm HexORFS / ORFS SwivelSO 8434-3 SWESAE 52M0221* S2 - Across Hex FlatsAOEL6Straight Thread Swivel ElbowORFS Swivel / SAE-ORBSAE 520281* JJ - Across Wrench FlatsC5OLOStraight Thread ElbowORFS / SAE-ORBSAE 520220* JJ - Across Wrench Flats** Sizes 14 and 32 are not included in SAE J1453.*** JJ for these parts does not conform to SAE.TUBEFITTINGPART #END SIZEAAA(in.)JJ(in.)M(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2(in.) -S -SS4 C6LO 1/4 1/4 1.07 9/16 0.85 9.2 9.26 C6LO 3/8 3/8 1.17 3/4 0.98 9.2 9.28 C6LO 1/2 1/2 1.49 3/4 1.10 9.2 9.210 C6LO 5/8 5/8 1.61 1 1/16 1.32 6.0 6.012 C6LO 3/4 3/4 1.83 1 3/16 1.48 6.0 6.014 C6LO** 7/8 7/8 2.07 1 5/16 1.6316 C6LO 1 1 2.11 1 7/16 1.64 6.0 6.020 C6LO 1 1/4 1 1/4 2.28 1 5/8 1.75 5.0 5.024 C6LO 1 1/2 1 1/2 2.41 1 7/8 1.92 4.0TUBEFITTINGPART #END SIZEL7(mm)L21(mm)S2(mm)STANDARDDynamicPressure(x 1,000 PSI)1(mm)2(in.) S SS4C6MLO 6 1/4 21.5 26.5 14 9.26C6MLO 8,10 3/8 25 29 19 9.28C6MLO 12 1/2 28 38 19 9.210C6MLO 14,15,16 5/8 33.5 41 27 6.012C6MLO 18,20 3/4 37.5 46.5 30 6.016C6MLO 22,25 1 41.5 53.5 36 6.020C6MLO 28,30,32 1 1/4 44.5 58 41 5.024C6MLO 35,38 1 1/2 49 61 50 4.0TUBEFITTINGPART #END SIZEAAA(in.)JJ(in.)N(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2UN/UNF-2A -S -SS4 AOEL6 1/4 7/16-20 1.04 9/16 1.29 6.06 AOEL6 3/8 9/16-18 1.18 3/4 1.45 6.08 AOEL6 1/2 3/4-16 1.49 3/4 1.60 6.010 AOEL6 5/8 7/8-14 1.65 1 1/16 1.97 6.012 AOEL6 3/4 1 1/16-12 1.79 1 1/16 2.1716 AOEL6 1 1 5/16-12 2.07 1 5/16 2.3520 AOEL6 1 1/4 1 5/8-12 2.29 1 5/8 2.45 4.024 AOEL6 1 1/2 1 7/8-12 2.41 1 7/8 2.59 4.0TUBEFITTINGPART #END SIZEJJ(in.)M(in.)N(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2UN/UNF-2A -S -SS4 C5OLO 1/4 7/16-20 9/16 0.85 1.29 6.0 6.04-6 C5OLO*** 1/4 9/16-18 9/16 0.92 1.45 6.04-8 C5OLO 1/4 3/4-16 3/4 0.97 1.60 6.06 C5OLO 3/8 9/16-18 3/4 0.98 1.45 6.0 6.06-4 C5OLO 3/8 7/16-20 3/4 0.98 1.37 6.0 6.06-5 C5OLO 3/8 1/2-20 3/4 0.98 1.37 6.06-8 C5OLO 3/8 3/4-16 3/4 1.04 1.60 6.0 6.06-10 C5OLO*** 3/8 7/8-14 7/8 1.15 1.97 6.06-12 C5OLO 3/8 1 1/16-12 1 1/16 1.28 2.17 6.08 C5OLO 1/2 3/4-16 3/4 1.10 1.60 6.0 6.08-6 C5OLO 1/2 9/16-18 3/4 1.10 1.44 6.0 6.08-10 C5OLO*** 1/2 7/8-14 7/8 1.21 1.97 6.08-12 C5OLO 1/2 1 1/16-12 1 3/16 1.32 2.17 6.0 6.010 C5OLO 5/8 7/8-14 1 1/16 1.31 1.97 6.0 6.010-8 C5OLO 5/8 3/4-16 1 1/16 1.31 1.80 6.010-12 C5OLO 5/8 1 1/16-12 1 3/16 1.41 2.17 6.012 C5OLO 3/4 1 1/16-12 1 3/16 1.47 2.17 6.0 6.012-8 C5OLO 3/4 3/4-16 1 3/16 1.47 1.84 6.012-10 C5OLO 3/4 7/8-14 1 3/16 1.47 2.01 6.012-16 C5OLO 3/4 1 5/16-12 1 7/16 1.62 2.35 5.514 C5OLO** 7/8 1 3/16-12 1 5/16 1.63 2.3016 C5OLO 1 1 5/16-12 1 7/16 1.64 2.35 5.5 5.516-12 C5OLO 1 1 1/16-12 1 7/16 1.64 2.32 6.0 6.016-20 C5OLO 1 1 5/8-12 1 5/8 1.76 2.45 4.020 C5OLO 1 1/4 1 5/8-12 1 5/8 1.76 2.45 4.0 4.020-16 C5OLO 1 1/4 1 5/16-12 1 5/8 1.76 2.42 4.0 4.020-24 C5OLO 1 1/4 1 7/8-12 1 7/8 1.92 2.59 4.0 4.024 C5OLO 1 1/2 1 7/8-12 1 7/8 1.92 2.59 4.0 4.024-20 C5OLO 1 1/2 1 5/8-12 1 7/8 1.92 2.59 4.032 C5OLO** 2 2 1/2-12 2 1/2 2.76 3.07 2.5A26Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 CatalogSeal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.C87OMLO90 Metric Straight Thread ElbowORFS / SO 6149SO 8434-3 SDESAE 52M0287* For special M38x2 (SO 6149-1 style) port. The current SO 6149 does not include the M38 size.CC5OLOLong Straight Thread ElbowORFS-Long / SAE-ORBSAE 521520* JJ - Across Wrench FlatsCLOMale Pipe ElbowORFS / NPTF* JJ - Across Wrench Flats* Size 14 is not included in SAE J1453.TUBEFITTINGPART #END SIZEJJ(in.)M(in.)N(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2UN-UNF-2A -S -SS4 CC5OLO 1/4 7/16-20 3/4 0.85 2.23 6.06 CC5OLO 3/8 9/16-18 3/4 0.98 2.61 6.08 CC5OLO 1/2 3/4-16 3/4 1.10 2.95 6.010 CC5OLO 5/8 7/8-14 1 1/16 1.31 3.51 6.012 CC5OLO 3/4 1 1/16-12 1 3/16 1.47 3.97 6.016 CC5OLO 1 1 5/16-12 1 7/16 1.64 4.51 5.5TUBEFITTINGPART #END SIZEJJ(in.)M(in.)N(in.)STANDARDDynamicPressure(x 1,000 PSI)1(in.)2NPTF -S -SS4 CLO 1/4 1/8-27 9/16 0.85 0.80 6.0 6.04-4 CLO 1/4 1/4-18 9/16 0.85 1.12 6.0 6.04-6 CLO 1/4 3/8-18 3/4 0.97 1.22 6.0 6.04-8 CLO 1/4 1/2-14 7/8 1.07 1.47 6.06 CLO 3/8 1/4-18 3/4 0.98 1.09 6.0 6.06-6 CLO 3/8 3/8-18 3/4 0.98 1.22 6.0 6.06-8 CLO 3/8 1/2-14 7/8 1.15 1.47 6.0 6.08 CLO 1/2 3/8-18 3/4 1.10 1.22 6.0 6.08-4 CLO 1/2 1/4-18 3/4 1.10 1.22 6.0 6.08-8 CLO 1/2 1/2-14 7/8 1.10 1.47 6.0 6.08-12 CLO 1/2 3/4-14 1 1/16 1.32 1.59 4.010 CLO 5/8 1/2-14 1 1/16 1.31 1.47 6.0 6.010-6 CLO 5/8 3/8-18 1 1/16 1.31 1.28 6.010-12 CLO 5/8 3/4-14 1 3/16 1.41 1.59 4.012 CLO 3/4 3/4-14 1 3/16 1.47 1.59 4.0 4.012-8 CLO 3/4 1/2-14 1 3/16 1.47 1.59 6.012-16 CLO 3/4 1-11 1/2 1 5/16 1.62 1.97 3.014 CLO* 7/8 3/4-14 1 5/16 1.63 1.6916 CLO 1 1-11 1/2 1 7/16 1.64 1.97 3.0 3.016-12 CLO 1 3/4-14 1 7/16 1.64 1.78 4.0 4.020 CLO 1 1/4 1 1/4-11 1/2 1 5/8 1.76 2.38 2.5 2.524 CLO 1 1/2 1 1/2-11 1/2 1 7/8 1.92 2.64 2.524-20 CLO 1 1/2 1 1/4-11 1/2 1 7/8 1.92 2.61 2.5TUBEFITTINGPART #END SIZEL7(mm)L10(mm)S2(mm)STANDARDDynamicPressure(x 1,000 PSI) 1 2(mm) (in.) SO 261 S SS4M12C87OMLO 6 1/4 M12X1.5 21.5 33 14 6.04M14C87OMLO 6 1/4 M14X1.5 24 35.5 176M12C87OMLO 8,10 3/8 M12X1.5 25 35.5 17 6.06M14C87OMLO 8,10 3/8 M14X1.5 25 35.5 17 6.06M16C87OMLO 8,10 3/8 M16X1.5 25 37.5 17 6.08M14C87OMLO 12 1/2 M14X1.5 28 36 19 6.08M18C87OMLO 12 1/2 M18X1.5 28 41 19 6.08M22C87OMLO 12 1/2 M22X1.5 31 49 27 6.010M18C87OMLO 14,15,16 5/8 M18X1.5 33.5 47.5 37 6.010M22C87OMLO 14,15,16 5/8 M22X1.5 33.5 49 27 6.012M22C87OMLO 18,20 3/4 M22X1.5 37.5 49.5 27 6.012M27C87OMLO 18,20 3/4 M27X2 37.5 55.5 27 6.016M33C87OMLO 22,25 1 M33X2 41.5 59.5 36 5.020M38C87OMLO* 28,30,32 1 1/4 M38X2 44.5 62 41 4.020M42C87OMLO 28,30,32 1 1/4 M42X2 44.5 63 41 4.024M48C87OMLO 35,38 1 1/2 M48X2 49 71.5 50 4.0A27Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.CC87OMLOLong 90 Metric Straight Thread ElbowORFS-Long / SO 6149SO 8434-3 SDELSAE 52M1587* S2 - Across Hex FlatsC8OMLOMetric Straight Thread ElbowORFS / Metric-ORR* S2 - Across Hex FlatsTUBEFITTINGPART #END SIZEL7(mm)L29(mm)S2(mm)STANDARDDynamicPressure(x 1,000 PSI) 1 2(mm) (in.) SO 261 S SS4M12CC87OMLO 6 1/4 M12X1.5 21.5 56.4 146M14CC87OMLO 8,10 3/8 M14X1.5 25 56.4 198M18CC87OMLO 12 1/2 M18X1.5 28 74.9 22 6.010M22CC87OMLO 14,15,16 5/8 M22X1.5 33.5 87.9 27 6.012M27CC87OMLO 18,20 3/4 M27X2 37.5 100.5 27 6.016M33CC87OMLO 22,25 1 M33X2 41.5 114.5 36TUBEFITTINGPART #END SIZEL7(mm)L10(mm)S2(mm)STANDARDDynamicPressure(x 1,000 PSI) 1 2(mm) (in.) SO 261 S SS4M12C8OMLO 6 1/4 M12X1.5 21.5 33 14 3.66M12C8OMLO 8, 10 3/8 M12X1.5 25 35.5 17 3.66M14C8OMLO 8, 10 3/8 M14X1.5 25 35.5 17 3.66M16C8OMLO 8, 10 3/8 M16X1.5 25 37.5 17 3.68M14C8OMLO 12 1/2 M14X1.5 28 36 198M18C8OMLO 12 1/2 M18X1.5 28 41 19 3.68M22C8OMLO 12 1/2 M22X1.5 31.5 49 27 3.610M22C8OMLO 14, 15, 16 5/8 M22X1.5 33.5 49 27 3.612M27C8OMLO 18, 20 3/4 M27X2 37.5 55.5 30 3.616M33C8OMLO 22, 25 1 M33X2 41.5 59.5 3620M38C8OMLO 28, 30, 32 1 1/4 M38X2 44.5 62 4120M42C80MLO 28, 30, 32 1 1/4 M42X2 44.5 63 41 2.5A28Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 CatalogSeal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.JLOUnion TeeORFS (all three ends)SAE 520401* JJ - Across Wrench Flats* Sizes 14 and 32 are not included in SAE J1453.JMLOUnion Tee - mm HexORFS (all three ends)SO 8434-3 TSAE 52M0401* S2 - Across Hex FlatsWJLOBulkhead Branch TeeORFS (all three ends) SAE 520959WJLO-WLNL - Body with Locknut(See page A12 for WLNL)* JJ - Across wrench fats.** E - Maximum bulkhead thickness.*** W - Bulkhead pilot diameter. Recommended clearance hole is W + 0.015".C4OMLOMale Elbow - BSPP (for SO 1179-1 Port)ORFS / BSPP-ORR* Y - Across Wrench FlatsTUBEFITTINGPART #END SIZEM(mm)N(mm)Y(mm)STANDARDDynamicPressure(x 1,000 PSI) 1 2(mm) (in.) BSPP S SS4C4OMLO 6 1/4 1/8-28 21.5 30 14 4.04-4C4OMLO 6 1/4 1/4-19 23.5 36 19 4.04-6C4OMLO 6 1/4 3/8-19 24.5 38 19 4.06C4OMLO 8,10 3/8 1/4-19 25 36 19 4.0 4.06-6C4OMLO 8,10 3/8 3/8-19 26.5 38 19 4.08-4C4OMLO 12 1/2 1/4-19 28 35.5 19 4.08C4OMLO 12 1/2 3/8-19 28 38 19 4.08-8C4OMLO 12 1/2 1/2-14 31 48.5 27 4.08-12C4OMLO 12 1/2 3/4-14 33.5 51.5 30 4.010-6C4OMLO 14,15,16 5/8 3/8-19 33.5 40.5 2710C4OMLO 14,15,16 5/8 1/2-14 33.5 48.5 27 4.010-12C4OMLO14,15,16 5/8 3/4-14 36 51.5 30 4.010-16C4OMLO14,15,16 5/8 1-11 39.5 58.5 3612-8C4OMLO 18,20 3/4 1/2-14 37.5 49.5 30 4.012C4OMLO 18,20 3/4 3/4-14 37.5 51.5 30 4.012-16C4OMLO 18,20 3/4 1-11 41 58.5 36 4.016-12C4OMLO 22,25 1 3/4-14 41.5 56 36 4.016C4OMLO 22,25 1 1-11 41.5 58.5 36 4.016-20C4OMLO 22,25 1 1 1/4-11 44.5 61 41 3.020-16C4OMLO28,30,32 1 1/4 1-11 44.5 61 41 4.020C4OMLO 28,30,32 1 1/4 1 1/4-11 44.5 61 4120-24C4OMLO28,30,32 1 1/4 1 1/2-11 49 64.5 50 2.024C4OMLO 35,38 1 1/2 1 1/2-11 49 64.5 50 2.0TUBEFITTINGPART #END SIZEJJ(in.)M(in.)STANDARDDynamicPressure(x 1,000 PSI)1-3(in.) -S -SS4 JLO 1/4 9/16 0.85 9.2 9.26 JLO 3/8 3/4 0.98 9.2 9.28 JLO 1/2 3/4 1.10 9.2 9.210 JLO 5/8 1 1/16 1.31 6.0 6.012 JLO 3/4 1 3/16 1.47 6.0 6.014 JLO* 7/8 1 5/16 1.6316 JLO 1 1 7/16 1.64 6.0 6.020 JLO 1 1/4 1 5/8 1.76 5.0 5.024 JLO 1 1/2 1 7/8 1.92 4.0 4.032 JLO* 2 2 1/2 2.76 3.0TUBEFITTINGPART #END SIZEEMAX(in.)JJ(in.)R(in.)S(in.)SS(in.)WDIA(in.)WW(in.)STANDARDDynamicPressure(x 1,000 PSI)1-3(in.) -S -SS4 WJLO 1/4 0.53 9/16 0.89 1.85 0.06 0.56 1.24 9.26 WJLO 3/8 0.53 3/4 1.02 2.05 0.06 0.69 1.34 9.28 WJLO 1/2 0.53 3/4 1.14 2.18 0.06 0.81 1.44 9.210 WJLO 5/8 0.52 1 1/16 1.36 2.48 0.06 1.00 1.60 6.012 WJLO 3/4 0.50 1 3/16 1.52 2.64 0.06 1.19 1.64 6.016 WJLO 1 0.51 1 7/16 1.67 2.80 0.06 1.44 1.66 6.0TUBEFITTINGPART #END SIZEL7(mm)S2(mm)STANDARDDynamicPressure(x 1,000 PSI) 1-3(mm) (in.) S SS4JMLO 6 1/4 21.5 14 9.26JMLO 8,10 3/8 25 19 9.28JMLO 12 1/2 28 19 9.210JMLO 14,15,16 5/8 33.5 27 6.012JMLO 18,20 3/4 37.5 30 6.016JMLO 22,25 1 41.5 36 6.020JMLO 28,30,32 1 1/4 44.5 41 5.024JMLO 35,38 1 1/2 49 50 4.0A29Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.WJMLOBulkhead Union Tee - mm HexORFS (all three ends)SO 8434-3 BHBTSAE 52M0959WJMLOWLNML - Body with Locknut(See page A12 for WLNML)* S2 - Across wrench fats.** E - Maximum bulkhead thickness.***d27 - Bulkhead pilot diameter.Recommended clearance hole is d27 + 0.4 mm.WJJLOBulkhead Run TeeORFS (all three ends)SAE 520958WJJLOWLNML - Body with Locknut(See page A12 for WLNL)* JJ - Across wrench fats.** E - Maximum bulkhead thickness.*** W - Bulkhead pilot diameter. Recommended clearance hole is W + 0.015".TUBEFITTINGPART #END SIZEEMAX(in.)JJ(in.)R(in.)S(in.)SS(in.)WDIA(in.)WW(in.)STANDARDDynamicPressure(x 1,000 PSI)1-3(in.) -S -SS4 WJJLO 1/4 0.53 9/16 0.89 1.85 0.06 0.56 1.24 9.26 WJJLO 3/8 0.53 3/4 1.02 2.05 0.06 0.69 1.34 9.28 WJJLO 1/2 0.53 3/4 1.14 2.18 0.06 0.81 1.44 9.2 9.210 WJJLO 5/8 0.52 1 1/16 1.36 2.48 0.06 1.00 1.60 6.012 WJJLO 3/4 0.50 1 3/16 1.52 2.64 0.06 1.19 1.64 6.016 WJJLO 1 0.51 1 7/16 1.67 2.80 0.06 1.44 1.66 6.020 WJJLO 1 1/4 0.51 1 5/8 1.79 2.97 0.06 1.69 1.66 5.024 WJJLO 1 1/2 0.51 1 7/8 1.95 3.13 0.06 2.00 1.66 4.0TUBEFITTINGPART #END SIZEd27(mm)E(mm)I2(mm)I4(mm)L16(mm)L17(mm)S2(mm)S4HEX(mm)STANDARDDynamicPressure(x 1,000 PSI) 1-3(mm) (in.) S SS4WJMLO 6 1/4 14.3 14 31.5 1.5 22.5 47 14 22 9.26WJMLO 8,10 3/8 17.5 14 34 1.5 26 52 19 27 9.28WJMLO 12 1/2 20.6 14 36.5 2.5 29 55.5 19 30 9.210WJMLO 14,15,16 5/8 25.4 14 40.5 2.5 34.5 63 27 3612WJMLO 18,20 3/4 30.2 14 41.5 3 38.5 67 30 41 6.016WJMLO 22,25 1 36.5 14 42 3 42.5 71 36 46 6.020WJMLO 28,30,32 1 1/4 42.9 14 42 3 45.5 75.5 41 5024WJMLO 35,38 1 1/2 50.8 14 42 3 49.5 79.5 50 60A30Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 CatalogSeal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.WJJMLOBulkhead Run Tee - mm HexORFS (all three ends)SO 8434-3 BHRTSAE 52M0958 WJJMLOWLNML - Body with Locknut(See page A12 for WLNML)* S2 - Across wrench fats.** E - Maximum bulkhead thickness.***d27 - Bulkhead pilot diameter. Recommended clearance hole is d27 + 0.4 mm.S6LOSwivel Nut Branch TeeORFS / ORFS / ORFS SwivelSAE 520433* JJ - Across Wrench Flats* Size 14 is not included in SAE J1453.S6MLOSwivel Nut Branch Tee - mm HexORFS / ORFS / ORFS SwivelSO 8434-3 SWBTSAE 52M0433* S2 - Across Wrench FlatsTUBEFITTINGPART #END SIZEAAA(in.)JJ(in.)M(in.)STANDARDDynamicPressure(x 1,000 PSI)1-3(in.) -S -SS4 S6LO 1/4 1.07 9/16 0.85 9.2 9.26 S6LO 3/8 1.17 3/4 0.98 9.2 9.28 S6LO 1/2 1.49 3/4 1.10 9.2 9.210 S6LO 5/8 1.65 1 1/16 1.31 6.0 6.012 S6LO 3/4 1.82 1 3/16 1.47 6.0 6.014 S6LO* 7/8 2.07 1 5/16 1.6316 S6LO 1 2.10 1 7/16 1.64 6.020 S6LO 1 1/4 2.29 1 5/8 1.76 5.0 5.024 S6LO 1 1/2 2.41 1 7/8 1.92 4.0TUBEFITTINGPART #END SIZEL7(mm)L21(mm)S2(mm)STANDARDDynamicPressure(x 1,000 PSI) 1-3(mm) (in.) S SS4S6MLO 6 1/4 21.5 26.5 146S6MLO 8,10 3/8 25 29 19 9.28S6MLO 12 1/2 28 38 19 9.210S6MLO 14,15,16 5/8 33.5 41 27 6.012S6MLO 18,20 3/4 37.5 46.5 30 6.016S6MLO 22,25 1 41.5 53.5 36 6.020S6MLO 28,30,32 1 1/4 44.5 58 41 4.024S6MLO 35,38 1 1/2 49 61 50TUBEFITTINGPART #END SIZEd27(mm)E(mm)I2(mm)I4(mm)L16(mm)L17(mm)S2(mm)STANDARDDynamicPressure(x 1,000 PSI) 1-3(mm) (in.) S SS4WJJMLO 6 1/4 14.3 14 31.5 1.5 22.5 47 14 9.26WJJMLO 8,10 3/8 17.5 14 34 1.5 26 52 19 9.28WJJMLO 12 1/2 20.6 14 36.5 2.5 29 55.5 19 9.210WJJMLO 14,15,16 5/8 25.4 14 40.5 2.5 34.5 63 27 6.012WJJMLO 18,20 3/4 30.2 14 41.5 3 38.5 67 30 6.016WJJMLO 22,25 1 36.5 14 42 3 42.5 71 36 6.020WJJMLO 28,30,32 1 1/4 42.9 14 42 3 45.5 75.5 4124WJJMLO 35,38 1 1/2 50.8 14 42 3 49.5 79.5 50A31Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 Catalog Seal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.R6LOSwivel Nut Run TeeORFS / ORFS Swivel / ORFSSAE 520432R6MLOSwivel Nut Run Tee - mm HexORFS / ORFS Swivel / ORFSSO 8434-3 SWRTSAE 52M0432* JJ - Across Wrench Flats* Size 14 is not included in SAE J1453.S5OLOStraight Thread Branch TeeORFS / ORFS / SAE-ORBSAE 520429* JJ - Across Wrench FlatsTUBEFITTINGPART #END SIZEAAA(in.)JJ(in.)M(in.)STANDARDDynamicPressure(x 1,000 PSI)1-3(in.) -S -SS4 R6LO 1/4 1.07 9/16 0.85 9.26 R6LO 3/8 1.17 3/4 0.98 9.28 R6LO 1/2 1.49 3/4 1.10 9.210 R6LO 5/8 1.65 1 1/16 1.31 6.012 R6LO 3/4 1.82 1 3/16 1.47 6.0 6.014 R6LO* 7/8 2.07 1 5/16 1.6316 R6LO 1 2.10 1 7/16 1.64 6.020 R6LO 1 1/4 2.29 1 5/8 1.76 5.024 R6LO 1 1/2 2.41 1 7/8 1.92 4.0TUBEFITTINGPART #END SIZEL7(mm)L21(mm)S2(mm)STANDARDDynamicPressure(x 1,000 PSI) 1-3(mm) (in.) S SS4R6MLO 6 1/4 21.5 26.5 14 9.26R6MLO 8,10 3/8 25 29 19 9.28R6MLO 12 1/2 28 38 19 9.210R6MLO 14,15,16 5/8 33.5 41 27 6.012R6MLO 18,20 3/4 37.5 46.5 30 6.016R6MLO 22,25 1 41.5 53.5 36 6.020R6MLO 28,30,32 1 1/4 44.5 58 41 4.024R6MLO 35,38 1 1/2 49 61 50 4.0TUBEFITTINGPART #END SIZEJJ(in.)M(in.)N(in.)STANDARDDynamicPressure(x 1,000 PSI) 1 2 3(in.) (in.) UN/UNF-2A -S -SS4 S5OLO 1/4 1/4 7/16-20 9/16 0.85 1.29 6.0 6.04-4-6 S5OLO 1/4 1/4 9/16-18 9/16 0.92 1.45 6.06 S5OLO 3/8 3/8 9/16-18 3/4 0.98 1.45 6.0 6.06-6-4 S5OLO 3/8 3/8 7/16-20 3/4 0.98 1.45 6.06-6-8 S5OLO 3/8 3/8 3/4-16 3/4 1.04 1.60 6.08 S5OLO 1/2 1/2 3/4-16 3/4 1.10 1.60 6.0 6.08-8-10 S5OLO 1/2 1/2 7/8-14 1 1/16 1.21 1.97 6.08-8-12 S5OLO 1/2 1/2 1 1/16-12 1 3/16 1.32 2.17 6.010 S5OLO 5/8 5/8 7/8-14 1 1/16 1.31 1.97 6.010-10-12 S5OLO 5/8 5/8 1 1/16-12 1 3/16 1.41 2.17 6.012 S5OLO 3/4 3/4 1 1/16-12 1 3/16 1.47 2.17 6.0 6.012-12-16 S5OLO 3/4 3/4 1 5/16-12 1 7/16 1.62 2.35 5.516 S5OLO 1 1 1 5/16-12 1 7/16 1.64 2.35 5.516-16-20 S5OLO 1 1 1 5/8-12 1 5/8 1.76 2.4520 S5OLO 1 1/4 1 1/4 1 5/8-12 1 5/8 1.76 2.45 4.024 S5OLO 1 1/2 1 1/2 1 7/8-12 1 7/8 1.92 2.59 4.0A32Parker Hannin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd4300 CatalogSeal-Lok O-Ring Face Seal Tube FittingsDimensions and pressures for reference only, subject to change.R5OLOStraight Thread Run TeeORFS / SAE-ORB / ORFSSAE 520428* JJ - Across Wrench FlatsS87OMLOMetric Straight Thread Branch TeeORFS / ORFS / SO 6149SO 8434-3 SDBTSAE 52M0489SLOMale Pipe TeeORFS / ORFS / NPTFSAE 520425* JJ - Across Wrench Flats* S2 - Across Hex FlatsTUBEFITTINGPART #END SIZEJJ(in.)M(in.)N(in.)STANDARDDynamicPressure(x 1,000 PSI) 1 2 3(in.) UN/UNF-2A (in.) -S -SS4 R5OLO 1/4 7/16-20 1/4 9/16 0.85 1.29 6.0 6.04-6-4 R5OLO 1/4 9/16-18 1/4 3/4 0.92 1.45 6.06 R5OLO 3/8 9/16-18 3/8 3/4 0.98 1.45 6.0 6.06-8-6 R5OLO 3/8 3/4-16 3/8 3/4 1.04 1.60 6.08 R5OLO 1/2 3/4-16 1/2 3/4 1.10 1.60 6.0 6.08-10-8 R5OLO 1/2 7/8-14 1/2 1 1/161.21 1.97 6.010 R5OLO 5/8 7/8-14 5/8 1 1/161.31 1.97 6.0 6.010-12-10 R5OLO 5/8 1 1/16-12 5/8 1 3/161.41 2.17 6.012 R5OLO 3/4 1 1/16-12 3/4 1 3/161.47 2.17 6.0 6.012-16-12 R5OLO 3/4 1 5/16-12 3/4 1 7/161.62 2.35 5.516 R5OLO 1 1 5/16-12 1 1 7/161.64 2.35 5.5 5.516-20-16 R5OLO 1 1 5/8-12 1 1 5/8 1.76 2.4520 R5OLO 1 1/4 1 5/8-12 1 1/4 1 5/8 1.76 2.45 4.0 4.024 R5OLO 1 1/2 1 7/8-12 1 1/2 1 7/8 1.92 2.59 4.0TUBEFITTINGPART #END SIZEJJ(in.)M(in.)N(in.)STANDARDDynamicPressure(x 1,000 PSI) 1 & 2 3(in.) NPTF -S -SS4-4-4 SLO 1/4 1/4-18 9/16 0.85 1.12 6.06 SLO 3/8 1/4-18 3/4 0.98 1.09 6.06-6-6 SLO 3/8 3/8-18 3/4 0.98 1.22 6.08 SLO 1/2 3/8-18 3/4 1.10 1.22 6.08-8-8 SLO 1/2 1/2-14 7/8 1.10 1.47 6.010 SLO 5/8 1/2-14 1 1/16 1.31 1.4712 SLO 3/4 3/4-14 1 3/16 1.47 1.59 4.016 SLO 1 1-11 1/2 1 7/16 1.64 1.97 3.020 SLO 1 1/4 1 1/4-11 1/2 1 5/8 1.76 2.38 2.5TUBEFITTINGPART #END SIZEL7(mm)L10(mm)S2(mm)STANDARDDynamicPressure(x 1,000 PSI) 1 & 2 3(mm) (in.) SO 261 S SS4M12S87OMLO 6 1/4 M12X1.5 21.5 33 144M14S87OMLO 6 1/4 M14X1.5 24 35.5 19 6.06M14S87OMLO 8,10 3/8 M14X1.5 25 35.5 19 6.06M16S87OMLO 8,10 3/8 M16X1.5 25 37.5 19 6.08M14S87OMLO 12 1/2 M14X1.5 28 36 198M18S87OMLO 12 1/2 M18X1.5 28 41 19 6.08M22S87OMLO 12 1/2 M22X1.5 31 49 27 6.010M22S87OMLO 14,15,16 5/8 M22X1.5 33.5 49 27 6.012M27S87OMLO 18,20 3/4 M27X2 37.5 55.5 30 6.016M33S87OMLO 22,25 1 M33X2 41.5 59.5 36 5.120M42S87OMLO 28,30,32 1 1/4 M42X2 44.5 63 41 4.024M48S87OMLO 35,38 1 1/2 M48X2 49 71.5 50A33Parker Hannin Corporati