Bill Chappell

An engineer in the robotics & semiconductor industries, he also taught college courses in microprocessor design and C programming. He uses microprocessors and electronics to solve complex problems. Designing devices from articulated motion control to satellite telemetry experiments.

At the age of 47 Bill was asked if he could build a device to communicate with the dead. At first he thought the whole Idea was amusing. On April 23 2007 he tested the device at Waverly Hills Sanatorium. A date that forever altered his life and perspective on the paranormal.

Bill believes without doubt there is more to the world and universe than we perceive with our 5 senses. Whether it is spirit, dimensional beings or the human mind itself. He has dedicated his skills to the pursuit of a tangible answer.

Bill operates Digital Dowsing llc www.Digitaldowsing.com where he sells some of the items he has created to the public.

Some of the Paranormal Devices Built By Bill Chappell

The Paranormal Puck.

Status (No Longer in production)

Designed to experiment with ITC phenomena

Captures and data logs changes in the environment, capture images and audio Via the host PC. Includes

alarm functions for unattended data capture “ Shadow Image captured in real time from Puck”

Also displays emf as video data

Example:

The ECM Puck:

Status (No Longer in Production)

Based on the Original Puck but a smaller set of sensors no video and Audio functions

The Ovilus:

Status (No Longer in Production)

A hand held device that takes energy readings and creates speech

Device has seven modes of operation with a built in 512 word list and a full

phonetic Generator for ITC experimentation

THE Ovilus FX:

Status (No Longer in Production)

The successor to the Ovilus the FX has 1024 word list built in The Ability to re-play

the

Last 1000 words said , and a pc interface( rs-232) to allow the real time capture of

data and words spoken. The FX has 9 modes of operation including a built in

speaker

The PX:

Status (No longer in Production)

The PX was replaced by the PX 1.2

Based on the Original Puck and Ovilus the PX is ultra small low

power ITC device That can run standalone or attached to a

computer

The PX: Version 1.2

Status (No longer in Production)

The PX was replaced by the Ovilus X

Based on the Original Puck and Ovilus the PX is ultra small low

power ITC device That can run standalone or attached to a

computer ** Remember Hold Both Power and Mode down to

turn off this version.

The Ovilus X:

Status (No longer in Production)

The Ovilus X was replaced by the Ovilus X, Rev A

Based on the Original Puck and Ovilus and the PX. The Ovilus X

is ultra small low power ITC device That can run standalone or attached to a

computer via it’s USB port.

The Ovilus X Rev A:

Status (No longer in Production)

The Ovilus X rev A was replaced by the Ovilus X, Rev B

Based on the Original Puck and Ovilus and the PX. The Ovilus X

is ultra small low power ITC device That can run standalone or

attached to a computer via it’s USB port.

The Ovilus X Rev B:

Status (in Production)

Based on the Original Puck and Ovilus and the PX. The Ovilus X

is ultra small low power ITC device That can run standalone or

attached to a computer via it’s USB port.

DTD “Digital Text Display”

Status (in Production)

Companion Display to See the Spoken words from the

Ovilus X series of devices.

OSD

Status (in Production)

Companion to the Ovilus X , the OSD allows the word Output

from the Ovilus X to be superimposed on Video.

Ovilus II

Status ( Limited Release ) Replace by the Ovilus II Rev A

This version of the Ovilus feature LCD Display

Advanced Speech Generation and Audio capabilities

User Programmable word list and a flash memory

Ovilus II Rev A

Status ( in Production)

Ovilus II , feature near human speech with 11 different

voices and a Built in LCD display, USB interface

Video Ovilus II

Status ( in Production)

A full featured Ovilus X with a built in video camera

and sonic range finder. Out puts to plug in Video

Goggles with built in IR illuminator and USB interface.

Xcam

Status ( in Production)

Built for paranormal investigation from the ground up. Features a IR/UV

sensitive video camera sonic distance sensor and Thermal temperature

sensor with values Overlaid in the video Output. Feature built in Ir

illuminator with Strobe function and USB port

Talker Kit:

Status (No Longer in Production)

A low cost kit utilizing phonetic speech to attempt ITC communications

Talking Sonic Reader

Status (No Longer in Production)

This unit tells the user how far way an object is by using ultrasonic sound

it will also data log to a host PC as well.

R.E.V.P (Reverse EVP)

Status (No Longer in Production)

This device was built to understand 1 potential method of how EVP is

created. Also another attempt at ITC communication . Based on

simple em modulation the REVP sends audio out in the form of an

electromagnetic field . Why, I believe it’s the same type of process

some types of EVP is being captured. It also allows a way to create

repeat events for new Equipment development.

ThermaSound

Status (No Longer in Production)

Like Many investigators thermal imaging is not an

economical answer.

The ThermaSound employ’s both thermal imaging and

Ultra sonic s in the same unit.

By sweeping back and forth a thermal image is obtained at the same time ultra sonic

Measurements are taken of the same area. The result is a thermal image that also contains

Distance information. The software can tell the user where an item is in relation to the

ThermaSound in real time. Seen on the Ghost Adventures “Stanley Hotel Episode”

God Helmet: Status (Status (No Longer in Production)

This device creates a strong magnetic field, worn on the temple it creates a sense of

Being watched or a religious experience. However this controller can operate independent from it’s

programming using the same input sensor system as the Ovilus allowing the helmet to be driven

By the environment.

IR\UV Strobe:

Status ( field tested)

Create strobe effects in 4 different wave lengths of light all computer controlled

Photon drone

Status ( Patent and right Sold)

EM Pump:

Status (No Longer in Production)

Seen on Ghost Adventures

This device has a very simple premise, it creates a EM field in the ELF VLF frequency Range sweeping

from elf to Vlf . The Idea is a possible beacon or attraction for phenomena. And a source of energy

EM Pump II

Designed to be lighter smaller with a greater battery life than the

original EM Pump. Built in Micro Processor and custom wound coil

supply a beacon like effect in EMF creating a pulse train only 18ms

long. With durations sweeping from .2 to 240 Hz

EM Vortex: Status Limited release

Creates a Variable speed EM Vortex using multiple

Coils and microprocessor control.

**Seen on Ghost Adventures

Biometric reader:

Status (Proto)

This device is a hybrid between EKG and a lie detector the premise is to measure human response

To the environment , question or sensation.

**Featured in the film “The Possessed”

Video OSD Ovilus

Status (Proto field testing) ** Seen on the Ghost Adventures

This is an Ovilus couple with an IR camera and a Video Goggle unit. The user can operate

In complete darkness will getting data in a Heads Up display fashion via the goggles.

Allows the ability to be hands free of other equipment in the dark while monitoring in real time.

The Gravity well

Status ( Proto)

Designed to produce extremely high EM fields , this device

is an attempt to create a magnetic vortex.

Computer controlled Sweep Radio “BOX”

Status ( devices are in field testing )

After doing the first RS hack box I started building a computer controlled version capable of

Multiple modes of operation linear sweep , random sweep and wave tuning. My original intension was

to add these functions to the Puck.

ASA (Atmospheric sampling array)

Status ( field tested)

**Seen on Ghost adventures Cripple Creek episode

This unit samples the air for particulate count, calculates humidly

and dew point as well returns temperature a barometric pressure.

Close Up Field Image image projected on a flat surface

Dual Head Laser

Status (Proto) ** As seen in the Booth Brother film “The Possessed”

Designed to utilize two spectrums of light (520 nm) and (820 nm)IR these laser beam split and create a

rotating 3D cube effect. Based on a theory from Keith Age. The laser light creates a visible grid to try

and detect the presence of “Shadow People”

Digital Dowsing rods

Status(Field Tested)

One of my first emf based devices used to create a

dosing rod type of experience

Using an electronic display

3D EM reader: Status (Proto)Based on the puck these device talk to each other and

triangulate energy fields in the environment The Data is feed to a PC where in can

be over laid on live video to produce a picture of the energy fields.

Micro EMF Detector: Status (Complete) www.chapp.com/emf.wmv This Device

is 100% digital single switch on off with four led display of EMF strength

Capacitive field reader

Status ( Proto )

Device reads capacitive changes in open air, ultra sensitive to field

changes

Talker Plus

Status( Prototype )

Talker is a EMF/ Inductive device that has an interface for 0-5 volt

sensors such as light and

geomagnetic devices. It converts signals to Phonetic speech or signals

to tones.

Ghost Lab

Status ( Complete )

Ghost creates a data streams from EMF, Light, Temperature and motion.

The Data is used to trigger event logging camera’s and other devices.

Mini Board

Status (Complete )

The Mini Board is a broad use micro controller that’s just a little

larger than a quarter. It can be programmed to run Radio’s in

Linear sweep and RVG type modes as well as trigger . Strobe

lights or modulate lasers for intensity control.

High Current Controller,

Status ( Complete )

Designed to pulse high current magnetic coils 200+ volts dc at

60 amps used for high intensity magnetic experiments

Five Channel USB Strobe controller: (No Photo ) Status (Complete)

Show here inside a Creepy Hollow IR Strobe See Video www.chapp.com/strobe.wmv

Each channel can control up to 30 amps at 12 volts DC. Designed for large are high intensity displays

Inductive Transceiver Status (Active on Skype since 2009)

This ITC device has no radio no voice chip just an Inductive

feedback circuit. And tone generation . The feedback circuit

will cancel out the tones leaving just a hissing Sound. When

the device is entreated with the tones become present again in

the form of an Audio signal. Use this device by calling

crossovertalk on Skype

The FM Ghost Box:

Status (On the Bench series Project 2010 )

Small battery operated palm sized programmable FM Ghost

Box

Image PX:

Status (Available for Download)

A free Software application designed to

enhance and clarify images formatted

For net books.

iPhone, iPad, iPod applications :

iOvilus Status ( Released ) Creating an

ITC type device on a Cell Phone. The

iOvilus has an enhanced dictionary

mode featuring a 1000 word

vocabulary for the iPhone and iPod

Touch

Gaia Speaks:

Status (Complete)

This Iphone app uses an array of paranormal pucks tied to a special Sensor

array to allow for global consciousness experiments via the iPhone and iPod

iCrystal:

Status (Complete)

This Iphone app uses the LCD to attempt charging and changing Crystals

stored energy patterns

iPhone or iPod

emFX

status (Complete)

3 Axis EMF meter for the iPhone iPod and iPad

Designed for use in low light has two level ranges

Displays all axis plus min max and average as well as current

Emf levels. Also has a talking yes/no function for ITC work

MagCam

Status(complete)

3 axis EMF controlled camera

Select the emf level to capture images at Magcam

Captures the images and records time date and emf levels

Right on the image.

** As seen on Ghost Adventure “Stanley Hotel Episode”

ITC

Status (Complete)

ITC combines several popular ITC feature

In one research tool. Used to create Evp

From the sweep of vocal tracks

iGeo Phone

status ( Complete)

This app uses the 3 axis accelerometer to

Give a visual display of movement . Adjust able

Display range allows the user to set the sensitivity

MagCam Pro

Status(beta Testing)

Using a PC and multiple iphone or ipods as sensors to

monitor

EMF Sound and Vibration remotely, also controls remote

wifi cameras and sound recorders all from a central PC.

Field Research

Chronicling the past 3 years of experiments with Mediums and Investigators.

Experiments with Kinect by Microsoft 3D camera with custom written interface software

Second image mapped in after an hour of filming at the Saint James Hotel

Also seen on Ghost Adventures “Cripple Creek Episode”

Prototype SEM meter

(The Future of Paranormal Research)

I continue to build new devices for the paranormal field all the time. My focus has shifted slightly

As I plan to create more software applications rather than hardware In the future. With the massive

Market share and processing power of many of the new cell phone Ghost Hunting will never be the

same.

What the Heck is SEM ? Sentient Energy Masses

Thanks for taking a look !

Best Regards !

Bill Chappell

Look for my new Books: coming soon

Adventures in the Depletion Zone “the truth about ITC”

And

Don’t Lick The Walls