Paper Mache Masks

Paper Mache Masks

• You will be constructing and designing your own mask using the generic mask form given to you.

• We are working on the form element of art in this project.

• You might decide to create a sugar skull mask, a movie character, or something totally original.

The Process

The Process

• You will received a plastic mask form.

• To prevent the paper mache from sticking to the mask (when we need to pull it off later), we will put a sheet of foil on as our first "layer".

The Process

• You will use a simple mix of glue and water as paste, newspaper and paper towel to create the mask layers, and a brush to lay the paste.

The Process

• You will apply a layer of newspaper first.

• Then you will apply a layer of paper towel.

• You will alternate between newspaper and paper towel for a total of 6 layers.

• The paper towel will be your last layer.

The Process

• After the last layer is dry, you will paint on a layer or two of white gesso. This creates a nice blank canvas.

• Remove the mask from the plastic form and you are ready to decorate. You can use acrylic paint for this. Markers will work on small detail areas.

• Feel free to add embellishments like jewels, sequins, and feathers to make your mask unique.

Sugar SkullCreated with a fine tipped sharpie after laying out the design lightly with pencil first.

The Process

• This student found a design online to replicate on her mask.

Mask Criteria

Construction:

• The paper mache portion was done neatly and patiently.

• The mask is sturdy and well made.

Craftmanship:

• The mask is neat and attention to detail is evident.

• Touch-ups are not needed.

• The mask is and looks finished.

Mask Criteria

Creativity

• Interesting and creative design.

• Shows individual style.

Effort

• Gave 100% on this project or went above and beyond.

• A lot of time and hard work was put into this.

• Extra design elements were added.