paper craft - yamaha motor company · pdf filepaper craft thank you for downloading the...

PAPER CRAFT

Thank you for downloading the "XJR1300" paper craft model. By simplyfollowing this manual while referring to the names and numbers shown on theparts sheets, you can assemble an authentic-looking replica of the XJR1300.

Assembly instructions: Fourteen A4-sized sheets.Paper craft: Nineteen A4-sized sheets with 185 parts in all

Assembly Instructions

These instructions apply only to the "XJR1300".These Paper Craft parts are easier to work with when printed out on strong,thick paper (like postcard stock).*In creating these Paper Craft models we use 135kg Kent paper stock (0.18mm).

Note

TO BEGIN

Items of Caution*Take care when using sharp or pointed objects or when

using bladed cutting tools. Place a heavy sheet of paper

under the paper you want to cut.

*Use glue and other adhesives only in well-ventilated

areas.

*When printing, use a slightly reduced font size as there

are many differences in dimensions depending on the

type of printer used.

Tools and materials needed-Ruler -Scissors - Blade cutter or "Exacto-knife" - Awl or

other pointed tool (for making a folding crease) - Felt

pen - Pin set - Glue - Hand towel ( for cleaning your

fingers) - Dictionary or other heavy book ( to press the

papers flat)

HOW TO ASSEMBLE

*Follow the working method and markings carefully.

*Cut carefully along the outer line with a cutting blade,

Exacto-knife or scissors.

*Cut carefully with a cutting blade, Exacto-knife orscissors.

*For folding parts, first use an awl or other pointedtool to make a light crease along the dotted or solidline. This will make the folds straight. Avoid makingstrong creases, as this will cause the paper to tear.

*As an adhesive, white wood glue is recommended.Avoid over-application as this will cause the paperto wrinkle.

*Before beginning assembly, test adhesive amountson extra paper.

*Occasionally, white spots will be apparent on foldsand cuts. Use a marker or pencil to fill-in these spots.It is recommended that this be done after each stageof assembly because coloring becomes more diffi-cult once parts are assembled.

One - point Advice

Basic working method and markings

Fold along these lines. The printed

surface should be on the outside of

the folded shape.

Solid lines

Dotted line

Fold along these lines. The printed

surface should be on the inside of

the folded shape.

Broken lines

Cut out parts marked with an as-

terisk (*).

Cut along these lines

Red dots are the reference positions

for gluing surfaces.

- 2 -

Do not fold or cut the parts

marked .

- 3 -

A-1

Fuel TankSheet A, 1 part in total Fold each relevant part according to the assembly symbols.

Reference photo

First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.

Indication ofWorking Methods Fold or Curve Glue

1 Assembling the Fuel Tank

Fold and glue the parts making sure both tabs(illustrated by dotted-lines) are neatly tucked in.

B-3

B-17

B-21

B-2

B-6

B-7

B-31B-33

B-13

B-14B-34

B-32

B-19

B-23

B-24

B-12

B-22

B-20

B-18

B-16

B-15

B-4

B-1

B-5

B-9B-10

B-25B-29

B-35 B-30

B-26

B-28B-27

B-36

B-8

B-11

Reference photo

- 4 -

Steering columnSheet B, 36 parts in total

Fold each relevant part according to the assembly symbols.



2 Assembling the Steering Column

Please use the dots on each component as reference when gluing surfaces.

C-2

C-4C-17

C-6

C-1

C-3

C-16

C-24

C-18

C-26

C-5

C-7

C-9

C-11

C-13

C-20

C-22C-28

C-29

C-25

C-27

C-19

C-8

C-12

C-10

C-14

C-21

C-23C-15

- 5 -

FrameSheet C, 29 parts in total

Fold each relevant part according to the assembly symbols.



3 Assembling the Frame


Reference photo

in the diagram indicates where the parts are to be glued later.Please do not glue parts at this stage.

Oil Cooler

Oil Cooler Frame (Center) Frame (Right&Left)

- 6 -

EngineSheet D, 38 parts in total

Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.



4 Assembling the Engine

Reference photo

D-1D-2

D-3

D-4

D-5

D-36D-35

D-11

D-10 D-24 D-6

D-25

D-8

D-31D-32

D-37

D-29

D-30

D-21

D-17D-18

D-19

D-20

D-26

D-28

D-12D-7

D-9

D-23D-22

D-27

D-34D-38

D-13D-14

D-15D-16

D-33

Cut out.

E-2

E-1

E-3

E-4

E-10

E-12E-14

E-23

E-6E-5

E-16E-8

E-7

E-9E-11 E-13

E-15

E-22

E-21

E-19

E-17

E-20

E-18

- 7 -

Reference photo

ExhaustSheet E, 23 parts in total




5 Assembling the Exhaust

Referring to the photo on the right, becareful of the angle when gluing each part.

To Exhaust joint

< Exhaust joint >

- 8 -

Seat and Side CoverSheet F, 5 parts in total




6 Assembling the Seat and Side Cover , Rear Årm

Reference photo

F-1F-3

F-2 F-4

F-5

G-1

G-2

G-3

G-4

G-6

G-5

G-7

Reference photo

Rear ArmSheet G, 7 parts in total


- 9 -

Reference photo

Sheet H, 10 parts in totalFold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.



7 Assembling the Rear Suspensions and Rear Fender

Rear Suspensions

Sheet I, 9 parts in totalRear Fender Fold each relevant part according to the assembly symbols.


H-3

I-1 & I-2

H-5

H-7

H-1

H-9

H-8

H-6

H-10

H-2

H-4

I-9 I-8

I-5I-7

I-3

I-6

I-4

Reference photo

J-9

J-10

J-13

J-7

J-14

J-12

J-11

J-8

J-5J-3

J-1

J-4J-6

J-2

- 10 -

Front tireSheet J, 14 parts in total




8 Assembling the Front Tire

Reference photo

*Glue the completed front wheel to the assembled front tire.

[Front tire]

[Front wheel]

[Rear tire]

- 11 -

Rear tireSheet K, 13 parts in total




9 Assembling the Rear Tire

Reference photo

*Glue the completed rear wheel to the assembled rear tire.

[Rear wheel]

K-12

K-11

K-13

K-7

K-10

K-8

K-9

K-6

K-5

K-2

K-1

K-3

K-4

Steering columnglue the assembled parts in numericalorder through .

- 12 -

10 Finish


Assembly Instructions

Glue the central frame to the fuel tank.

Glue the seat to the fuel tank.

Glue the seat to the rear fender.

Glue the engine to the central frame.

Glue the rear arm to the engine.

Glue the exhaust pipe to the engine.

Glue the exhaust pipe to the rear arm.

Insert the right and left frames into the central frameand glue this part to the seat.

Glue the right and left rear shock absorbers to the right andleft frame and rear fender.

Glue the rear tire to the rear arm.

Glue the oil cooler to the frame.

Glue the front tire to the steering column.

Complete the assembly by gluing the steeringcolumn to the central frame.

Frame (Center)Fuel Tank Seat & Side Cover Rear Fender

Engine

Rear Tire

Rear Suspensions

Rear Arm

ExhaustFrame (Right&Left)

Front TireOil Cooler

11 Assembled Model and the List of PartsPlease refer to the photo below when attaching each component.

- 13 -

RIGHT FRONT

E -1E -2E -3E -4E -5E -6

E -7E -8E -9E-10E-11E-12

E-13E-14E-15E-16E-17E-18

E-19E-20E-21E-22E-23

J- 1J- 2J- 3J- 4J- 5

B- 1B- 2B- 3B- 4B- 5B- 6B- 7

B- 8B- 9B-10B-11B-12B-13B-14

B-15B-16B-17B-18B-19B-20B-21

B-22B-23B-24B-25B-26B-27B-28

J- 6J- 7J- 8J- 9J-10

J-11J-12J-13J-14

A-1

K- 1K- 2K- 3K- 4K- 5

K- 6K- 7K- 8K- 9

K-10K-11K-12K-13

H -1H -2H -3H -4H -5

H -6H -7H -8H -9H-10

B-29B-30B-31B-32B-33B-34B-35B-36

F -1F -2F -3

F -4F -5

Rear Suspensions Seat & Side Cover Fuel Tank

Front TireExhaustRear Tire

Steering

12 Assembled Model and the List of PartsPlease refer to the photo below when attaching each component.

- 14 -

LEFT REAR

I -1I -2I -3I -4I -5

I -6I -7I -8I -9

G -1G -2G -3

G -4G -5G -6

G -7

C-17

C -1C -2C -3C -4C -5C -6C -7

C -8C -9C-10C-11C-12C-13C-14

C-15C-16C-18C-19C-20C-21C-22

C-23C-24C-25C-26C-27C-28C-29

D -1D -2D -3D -4D -5D -6D -7

D -8D -9D-10D-11D-12D-13D-14

D-15D-16D-18D-19D-20D-21D-22

D-23D-24D-25D-26D-27D-28D-29

D-30D-31D-32D-33D-35D-36D-37D-38

Engine

Oil Cooler

Frame Rear Arm Rear Fender

paper craft - yamaha motor company · pdf filepaper craft thank you for downloading the...

Documents