panther 2000 c o vert buried cable intrusion detection sensor · panther 2000 produces a controlled...
TRANSCRIPT
Panther 2000C overt Buried Cable Intrusion Detection Sensor
Very high probability of detection
Low false/nuisance alarm rate
Completely covert
Low vulnerability to defeat
Tamper-proof
Terrain following
Panther™ 2000 is a covert, buried securitysensor that creates an invisible electromag-netic detection field around the patentedSC-1 single sensor cable.
Because the sensor cable is buried and thedetection field is invisible, intruders do notknow the location of the detection zone.This results in a very low vulnerability todefeat.
Unlike other sensor technologies, Panther2000 uniquely senses a human intruder’selectromagnetic cross-section. Commonfalse/nuisance alarm sources like birds,small animals, rain, foliage, snow, blowingsand, wind, fog, seismic, acoustic andmagnetic effects are easily filtered out,ensuring a high level of operator confi-dence.
The detection field is not disrupted byuneven terrain or irregular perimeter shapes.The sensor cables can be installed in mostburial media, including sand, soil, gravel,asphalt and concrete.
Panther 2000 produces a controlled detec-tion field over the length of each zone andprovides continuous, fail-safe operation.Panther 2000 is an ideal sensor for applica-tions such as VIP residences, commercial
sites, parked aircraft and vehicles, utilitystorage sites and many more.
Put the stealth of a Panther into your perimeter security!
C overt Buried Cable Intrusion Detection Sensor
INTERNATIONALSenstar-Stellar Corp.
119 John Cavanaugh RoadCarp, ON K0A 1L0
CanadaTel: (613) 839-5572Fax: (613) 839-5830
UNITED STATESSenstar-Stellar Inc.
43184 Osgood RoadFremont, CA 94539Tel: (510) 440-1000Fax: (510) 440-8686
1-800-676-3300 • West Coast (HQ)[email protected]
UNITED KINGDOMSenstar-Stellar Limited
Orchard HouseEvesham Road
BroadwayWorcs., U.K. WR12 7HU
Tel: (1386) 834433Fax: (1386) 834477
LATIN AMERICASenstar-Stellar Latin America,
Pradera No.214Col. Pradera
Cuernavaca, Morelos62170, Mexico
Tel: 011 52 (73) 130 288Fax: 011 52 (73) 170 [email protected]
EUROPESenstar GmbH
Riedheimer Str. 8<None>88677 Markdorf GermanyTel: 011 49 7544-95910
Fax: 011 49 [email protected]
Senstar-Stellar isrepresented by dealers
in over 76 countries.ISO 9002
www.senstarstellar.comCopyright ©2001 All rights reserved. Features and specifications are subject to change without notice. Senstar-Stellar and the Senstar-Stellar logo are registered trademarks of Senstar-Stellar Corporation
A1MM0312-001 Printed in Canada
Extremely high probability of detection& low false/nuisance alarm ra t e• minimizes losses• minimizes costs of responding to false
alarms• reduces operating costs,fewer guards
required• promotes high level of operator
confidence
Single Cable Design• simpler, lower cost installation
Extremely Reliable Hardwa r e• low ownership and maintenance costs
over product life
Te r rain Fo l l ow i n g• minimizes installation costs• adapts easily to site requirements• can protect varying perimeter
configurations
Completely Cove r t• low vulnerability to defeat and
tampering• no effect on site appearance
Equipment with diagnostic facilities• facilitates calibration and promotes
user confidence
Compatible with other manufacturers’ sensorsand alarm annunciation e q u i p m e n t• suitable for sites with existing security
systems• reduced system and installation costs
Physical • (Enclosure and Electronics)Size• 34.2 cm x 26.2 cm x 8.9 cm• (13.5 in.x 10.25 in. x 3.5 in.)Weight• 3.5 kg (8 lbs.)
E n v i ro n m e n t a l• Operating temperature:0˚C to 50˚C
(32˚F to 122˚F) for control unit
Panther 2000
SP E C I F I C AT I O N S
E l e c t r i c a l• Input power: 12 VDC + 20% /-15%,
@700 mA• Two ± 2.5 V analog outputs for zone A
and B detection response• Banana plugs for connection of chart
recorder or voltmeter• Ramp and 1.00 V calibration output• Alarm outputs - Form C relay 16 V
DC max.0.25 A max. 4 VA resistiveload
• Remote inputs - test and reset - activated by grounding input (sink 5 mA for 30 ms min.)
Terminal Connection Board• 40-pin ribbon cable for module
connection• 18-position 45˚ screw terminal strip for
wiring connections• 10-position DIP switch for option
selection• 3AG fuse plus spare• Provision for solderless installation
of end-of-line resistors on all relaycontact outputs
Sensor Cable• Available in standard lengths of
100 m (328 ft.) or 150 m (492 ft.)• Each cable also includes 50 m
(164 ft.) of lead-in section
* Specifications subject to change without priornotice.