panel processing - woodworking network · 2017. 1. 27. · colonial saw co. inc., 122 pembroke st.,...
TRANSCRIPT
PANEL PROCESSING PANEL SAWS REFERENCE CHART
Product Name/No
Vert
ical
Sl
idin
g Ta
ble
Bea
m
Ang
ular
Motor hp
Man
ual
Sem
iAut
omat
ic
Aut
omat
ic
NC or CNC
Capacity per 8 hr. Shift
Work Piece Size
Scor
ing
Type of Tilt
Type of Hold Down
No.
of O
pera
tors
Special Features
Hyd
raul
ic
Man
ual
Pneu
mat
ic
redbookonline.com RED|BOOK
Adwood Corp., P.O. Box 1195, High Point, NC 27261 (336) 884-1846 www.adwood.com Elcon D-Series ■ 3 ■ 4' x 8' 1 Fast changeover. Easy plunging.
Elcon DX-Series ■ 4 ■ 7’ x 13’ ■ Pneumatic 1 Reinforced construction. Prog.rail.
Elcon DSX-Series ■ 7.5 ■ 7’ x 17’ ■ Pneumatic 1 Up to 3” of panel thickness.
Elcon DSXE-Series ■ 7.5 ■ 7’ x 60’ ■ Pneumatic 1 Up to 5” of panel thickness.
Casolin Astra 3000 ■ 4.8 ■ 10’ x 10’ ■ Pneumatic avail. 1 1
Casolin SE 400 ■ 9 ■ 10’ x 10’ ■ Pneumatic avail. 1 1
Casolin SE 400NT ■ 9 ■ 10’ x 10’ ■ Pneumatic avail. 1 1 Motorized blade height & tilt, dig. readout for tilt angle.
Casolin Digit NT ■ 9 ■ 10’ x 10’ ■ Pneumatic avail. 1 1 See above.
Casolin Digit NTSQ ■ 9 ■ * 10’ x 10’ ■ Pneumatic avail. 1 1 See above plus motorized rip fence.
Casolin Digit 5CNC ■ 9 ■ NC ■ Pneumatic avail. 1 1 All functions controlled by NC.
Atlantic Machinery Corp., 36 South End Plaza, New Milford, CT 06776 (860) 354-7200 www.atlanticmach.com Putsch/Menicon Univer SVP EL3200 Univer SVP133 Univer SVP145 Univer SVP950A Univer SVP145A
■ ■ ■ ■ ■
4.8, 6, 7.5 4.8, 6, 7.5 4.8, 6, 7.5 7.5 7.5
■ ■ ■
■ ■
Medium Medium Medium High High
5’ x 10’ 5’ x 12’ 5’ x 10’ 6’ x 12’ 6’ x 14’ 6’ x 12’
Opt. Opt. Opt. Opt. Opt.
1 All Univer saws have a one-piece heavy-duty welded steel frame, electrically operated shifting grid, pop-up rollers, opt. micro- adjustable scoring unit; 0.1mm over 1 meter length guaranteed with factory installation. Solid Surface/VUniver grooving models available.
Univer SVP145/45° ■ 4.8, 6, 7.5
■ Medium 6’ x 12’ Opt. 1 Cuts at 45° bevel as well as at 90° positions.
Paoloni S260 ■ 6.6 ■ Medium 8’ x 8’ Driven ■ Eccentric 1 Same as Univer SVP145/45°.
Paoloni S300 ■ 7.5 ■ Medium 10’ x 10’ 1 hp ■ Eccentric 1 Same as above.
Paoloni P45 ■ 9 ■ High 8’ x 10’ 1 hp ■ Eccentric 1 Electric blade lift/scoring adjustment.
Paoloni P3200S ■ 9 ■ High 10’ x 10’ 1 hp ■ Eccentric/ Electric 1 Same as above + electric blade tilt.
Paoloni P3200A ■ 9
■ High 10’ x 10’ 1 hp ■ Eccentric/ Electric 1 Same plus electric moving rip fence.
Biesse America, P.O. Box 19849, Charlotte, NC 28219-9849 (704) 357-3131 www.biesseamerica.com Selco Sektor 450 ■ 12 ■ CNC 75mm Projection up to 13.5’ ■ Pressure beam 1 PC based control, helical rack &
pinion saw carriage drive, integrated side alignment.
Selco Sektor 470 ■ 18 ■ CNC 90mm Projection up to 13.5’ ■ Pressure beam 1 PC based control, helical rack & pinion saw carriage drive, integrated side alignment. Servo drive blade raising.
Selco WN 610 ■ 20 ■ CNC 95mm Projection up to 13.5’ ■ Pressure beam 1 PC based control, helical rack & pinion saw carriage drive, integrated side alignment. Servo drive blade raising
Selco WN 630 ■ 25 ■ CNC 108mm Projection up to 13.5’ ■ Pressure beam 1 PC based control, helical rack & pinion saw carriage drive, integrated side alignment. Servo drive blade raising
Selco WN 650 ■ 25 ■ CNC 123mm Projection up to 13.5’ ■ Pressure beam 1 PC based control, helical rack & pinion saw carriage drive, integrated side alignment. Servo drive blade raising
Selco WNT 610 ■ 20 ■ CNC 95mm Projection up to 13.5’ ■ Pressure beam 1 Rear/Side loading lift table, PC control helical rack & pinion saw carriage drive, pat. quick change, electronic scoring adj. Servo blade raising.
Selco WNT 630 ■ 25 ■ CNC 108mm Projection up to 13.5’ ■ Pressure beam 1 Rear/Side loading lift table, PC control helical rack & pinion saw carriage drive, pat. quick change, electronic scoring adj. Servo blade raising
Selco WNT 650 ■ 25 ■ CNC 123mm Projection up to 13.5’ ■ Pressure beam 1 Rear/Side loading lift table, PC control helical rack & pinion saw carriage drive, pat. quick change, electronic scoring adj. Servo blade raising
PANEL PROCESSING PANEL SAWS REFERENCE CHART
Product Name/No
Vert
ical
Sl
idin
g Ta
ble
Bea
m
Ang
ular
Motor hp
Man
ual
Sem
iAut
omat
ic
Aut
omat
ic
NC or CNC
Capacity per 8 hr. Shift
Work Piece Size
Scor
ing
Type of Tilt
Type of Hold Down
No.
of O
pera
tors
Special Features
Hyd
raul
ic
Man
ual
Pneu
mat
ic
redbookonline.com RED|BOOK
Selco WN 710 ■ 25 ■ CNC 107mm Projection up to 13.5’ ■ Pressure beam 1 PC based control, helical rack & pinion saw carriage drive, integrated side alignment. Servo drive blade raising
Selco WN 730 ■ 25 ■ CNC 127mm Projection up to 13.5’ ■ Pressure beam 1 PC based control, helical rack & pinion saw carriage drive, integrated side alignment. Servo drive blade raising
Selco WN 750 ■ 40 ■ CNC 152mm Projection up to 13.5’ ■ Pressure beam 1 PC based control, helical rack & pinion saw carriage drive, Servo side alignment/dust extr.. Servo drive blade raising
Selco WNT 710 ■ 25 ■ CNC 107mm Projection up to 13.5’ ■ Pressure beam 1 Rear/Side loading lift table, PC control helical rack & pinion saw carriage drive, pat. quick change, electronic scoring adj. Servo blade raising
Selco WNT 730 ■ 25 ■ CNC 127mm Projection up to 13.5’ ■ Pressure beam 1 Rear/Side loading lift table, PC control helical rack & pinion saw carriage drive, pat. quick change, electronic scoring adj. Servo blade raising
Selco WNT 750 ■ 40 ■ CNC 152mm Projection up to 13.5’ ■ Pressure beam 1 Rear/Side loading lift table, PC control helical rack & pinion saw carriage drive, pat. quick change, electronic scoring adj. Servo blade raising, Servo side alignment/dust extr.
Twin Pusher 1.2 Sektor Series
■ 12 / 18 ■ CNC 75 – 90 mm Projection
up to 13.5’ ■ Pressure beam 1 Uniquely designed, non-motorized Independent 2 gripper system w/side support. Productivity increase up to 25%
Twin Pusher 2.1 6 Series
■ 20 / 25 ■ CNC 90 – 123 mm Projection
up to 13.5’ ■ Pressure beam 1 Independent Servo controlled single gripper w/side movement and support. Simultaneous stagger and rip/cross cut ability.
Twin Pusher 2.2 7 Series
■ 25 / 40 ■ CNC 107 – 152 mm Projection
up to 13.5’ ■ Pressure beam 1 Two Independent Servo controlled grippers w/side movement and support. Simultaneous stagger and rip/cross cut ability.
WNA 600 Synchrologic
■ 40 ■ CNC 145mm Projection up to 13.5’ ■ Pressure beam ? Compact angular
WNA 600 Shuttle System
■ 40 ■ CNC 145mm Projection up to 13.5’ ■ Pressure beam ? Patented shuffle transfer from Rip to Cross
Cantek America Inc.,PMB #104,1124 Fir Ave.,Blaine,WA 98230 (888) 982-2683 www.cantekamerica.com P405M ■ 7.5 & 1 ■ 5’ by 10’
panels ■ Manual 1 Power blade rise/fall & manual tilting. 16’ blade capacity
P400E ■ ■ NC 5’ by 10’ panels ■ Manual 1 3-axis NC control for power rip
fence, blade rise/fall & tilting. (2) digital readouts on crosscut fence and (1) for angular adjustment
Casadei Busellato, 4322 Piedmont Pkwy., Greensboro, NC 27410 (336) 854-1211 www.delmac.com Casadei SC315 ■ 6.6 to 9 ■ 2600x2600mm
3800x3200mm ■ ■ Eccentric clamp 1 Alum. alloy carriage, precision hard. & rectified steel ways, ball bearing syst.
Casadei SC350M ■ 6.6 to 9 ■ 2600x2600mm 3800x3200mm ■ Eccentric clamp 1 Motorized movement of height &
tilt on saw blade. Ball bearing system
Casadei SC400 ■ 9 to 12 ■ 2600x2600mm 3800x3200mm ■ ■ Eccentric clamp 1 Alum. alloy carriage, precision
hard. & rectified steel ways, ball bearing syst.
Casadei SC400A ■ 9 to 12 ■ NC 2600x2600mm 3800x3200mm ■ Eccentric clamp 1 Auto prog. movement of height &
tilt on saw blade. Ball bearing system
Casadei SC450 ■ 9 to 15 ■ 2600x2600mm 3800x3200mm ■ ■ Eccentric clamp 1 Alum. alloy carriage, precision
hard. & rectified steel ways, ball bearing syst.
Casadei SC450A ■ 9 to 15 ■ 2600x2600mm 3800x3200mm ■ Eccentric clamp 1 Auto prog. movement of height &
tilt on saw blade. Ball bearing system
Casadei AXO 65 3200 ■ 12 ■ CNC Var. based on
cutting pattern. 3200mm ■ Pneumatic beam & grippers 1 Steel plate saw carriage positions
fast via belt drive on 8 hardened V rollers, indep. main & scoring motors w/vertical movement of main saw. PC/PLC integrated control syst.
Casadei AXO 65 3800 ■ 12 ■ CNC Var. based on
cutting pattern. 3800mm ■ Pneumatic beam & grippers 1 Same as above
Casadei AXO 85 3200 ■ 18 ■ CNC Var. based on
cutting pattern. 3200mm ■ Pneumatic beam & grippers 1 Same as above
PANEL PROCESSING PANEL SAWS REFERENCE CHART
Product Name/No
Vert
ical
Sl
idin
g Ta
ble
Bea
m
Ang
ular
Motor hp
Man
ual
Sem
iAut
omat
ic
Aut
omat
ic
NC or CNC
Capacity per 8 hr. Shift
Work Piece Size
Scor
ing
Type of Tilt
Type of Hold Down
No.
of O
pera
tors
Special Features
Hyd
raul
ic
Man
ual
Pneu
mat
ic
redbookonline.com RED|BOOK
Casadei AXO 85 3800 ■ 18 ■ CNC Var. based on
cutting pattern. 3800mm ■ Pneumatic beam & grippers 1 Same as above
Colonial Saw Co. Inc., 122 Pembroke St., P.O. Box A, Kingston, MA 02364 (781) 585-4364 www.csaw.com Striebig Compact ■ 4 ■ Up to 2 units 5’ x 10’ x 2-3)/
8” ■ Spring tension & panel end stop 1 All-welded frame; HD support
rollers, midshelf w/movable fingers & full-length small parts support; auto-shifting back grid; TRK dust system; opt.true split-blade scoring.
Striebig Compact Auto Striebig Compact Plus ■ ■ 5-1/44
■ ■ Up to 2 units Up to 2 units 5’ x 10’ x 2-3)/
8” 6’9”x15’ x 2-3/8”
■ Spring tension &Same as above. Same as above. Same as above.
Striebig Compact Plus Auto ■ 5-1/4 ■ Up to 2 units 6’9”x15’ x 2-
3/8” Same as above. Same as above. Striebig OptisawStandard ■ 7.5 ■ Up to 2 units 5’6”x14’x3-
1/8” ■ Spring tension &locking rollers 1 Same +V grooving option.
Striebig Evolution ■ 7.5 ■ Up to 2 units 5’6” or 7” x 14’ or 17-1/4” x 3-1/8”
■ Spring tension &auto locking rollers
1 Same + digital measuring; full wood back grid, auto-locking sawbeam/ roller; push-button plunge/tilt/lock of saw head, opt. shimless scoring, bottompanel edge trimming.
Striebig Control 7.5 ■ 15-20% increase Same ■ Same 1 Same plus auto trave (33-82 fpm); end sensor; cycle selector; start position memory.
Striebig DMS DigitalMeasuring System Above, plus
increased accuracy, reduced waste, higher production, enhanced versat.
Digital measuring system for allStriebig saws. Rapid cut set up to 0.005"/0.1mm, instant inch/metric conversion, LED display.
EPS Programmable Stop NC As above plus
approx. 25% production increase on any model except Compact
Automatic programmable digitalstop for Striebig saws. Rapid cut System setup from keyboard. Stores up to 400 addresses. Retrofittable.
Striebig WSG Angle-Cutting Attachment Allows cutting of
angles 0-46° Rapid mounting and dismounting. Unipoint system simplifies measuring.
Doucet Machineries Inc., 340 6th St., Daveluyville, PQ, Canada G0Z 1C0 (819) 367-2633 www.doucetinc.com RS-75 20-30 or 40 ■ ■ ■ Power
Feed Up to 75 fpm Up to 60” wide Up to 0.75” thick
opt. Rollers 1 Optional feeder/stacker Throughfeed machine.
HRS-120 75 or 100 ■ Power Feed Up to 120 fpm Up to 60” wide
Up to 4” thick opt. Inflated rollers 1 Optional augers 2x30 hp Throughfeed machine.
Edgetech Inc., 11933 12th Ave. S., Burnsville, MN 55337 (952) 881-1925 www.edgetechusa.com CTS730 Countertop Saw ■ ■ 5 ■ Variable Countertops
Bar topssolid surface
Pneumatic clamp Miter cuts, drawbolt cavities, variable speed. Opt. dual laser lightguide. Opt. variable mitre w/digitalreadout. Opt. attached conveyors.
CTS740 (Extended length)Countertop Saw
■ ■ 5 ■ Variable Countertops Bar topssolid surface
Pneumatic clamp Extended length saw for largercutting capacity. Mitre cuts, drawbolt cavities, variable speed. Opt. duallaser light guide, opt. variable mitrew/ digital readout, opt. 5th router.Opt. 20” blade, opt. attached conveyors.
CTR960 Countertop Router ■ 3-1/4Opt. 5
hpHigh Freq. Motor
■ Variable Countertops Bar topssolid surface
Pneumatic clamp Cuts openings in countertops for sinks & rangetops. Makes laminate endcaps & sidesplash blocks. Cuts rectangular openings w/o template.
CTR960-U Undermount sink router
■
3-1/4Opt. 5 hp highfreq. motor
■ Variable Countertops Bar tops Pneumatic clamp Routs groove for undermount sink
installation in laminate countertops. European Woodworking Machinery, PO Box 550, Franklinton NC 27525 (919) 494-5197 www.ewmco.com
ANTHON PORTA ■ 12, 30 ■ ■ ■ CNC Dep. on pattern 4' X 10' up to
8' X 21" Beam & rolls 2 Automatic feeding and racking is possible, side aligners.
ANTHON LN ■ 12, 18 ■ ■ ■ CNC 25 cu. m 4' X 10' up to 7' X 18' ■ Pressure beam &
pneumaticcylinders 1 Patented turn table for head cutting, data transfer from external PC via interface to saw computer, special clamps, sidealigners, various systems of feeding and stacking depend. on requirements, PC-controloptimizing system, waste disposal.
ANTHON PROFIT ■ ■ 12, 18 ■ ■ CNC 60 cu. m 5' X 10' up to 8' X 18'
■ Pressure beam & pneumatic cylinders
2 Same as above.
ANTHON LNB ■ ■ 30 ■ CNC 100 cu. m. 5' X 12' up to 11' X 21' ■ Pressure beam &
pneumatic 1 Same as ANTHON LN.
PANEL PROCESSING PANEL SAWS REFERENCE CHART
Product Name/No
Vert
ical
Sl
idin
g Ta
ble
Bea
m
Ang
ular
Motor hp
Man
ual
Sem
iAut
omat
ic
Aut
omat
ic
NC or CNC
Capacity per 8 hr. Shift
Work Piece Size
Scor
ing
Type of Tilt
Type of Hold Down
No.
of O
pera
tors
Special Features
Hyd
raul
ic
Man
ual
Pneu
mat
ic
redbookonline.com RED|BOOK
cylinders ANTHON LNC ■ 37, 42 ■ CNC 150 cu. m. 5' X 12' up to
11' X 21' ■ Pressure beam & pneumatic cylinders
1 Same as ANTHON LN.
ANTHON PVL/PVQ 13 X 5 ■ CNC Dep.onthickness 4' X 10' up to 8' X 16' ■ Pneumatic
cylinders 1 Multiple rip of X-cutting saw for single sheets.
ANTHON CP ■ 2x25 ■ CNC 120mm/book 21’ cut length ■ Pressure beam & clamps Allen Bradley or Siemens
PLC,Visualization, turntable for head cuts feeding systems, stacking systems,postforming saw, optimization, AC-Servo motors for programmablepusher, THK guiding system.
ANTHON POA 25 each ■ CNC 100mm/book 12x100’ width Pressure beam & clamps Allen Bradley or Siemens PLC,
visualization, feeding systems, stackingsystems, optimization, THK guiding system.
ANTHON POB 30 each ■ CNC 150mm/book See above See above See above. ANTHON POC 40 each ■ CNC 200mm/book See above See above See above.
Giben America Inc., 2915 Courtyards Drive, Ste. C, Norcross, GA 30071 (770) 448-9140 www.giben.com Smart ST ■ 15 ■ NC Variable based on
cutting pattern Start 16000mm up to 3300mm L
■ Pne. pressure beam w/Torsion bar
1, 2 Quick change tooling system.
Smart 80 SP ■ 15 ■ PC w/Windows OS
Variable based on cutting pattern CL 3300-
4400mm PS 3350-4300mm
■ Pne. pressure beam w/Torsion bar
1 On board opt. avail. Quick change tooling syst., auto dynamic sid aligner, floating grippers, air flotation tables.
Smart 95 SP High Tech ■ 15-18 ■ PC
w/Windows OS
Variable based on cutting pattern
CL 3300-4400mm PS 3350-4300mm Pne. pressure
beam w/Torsion bar
1 Same as above
Smart 95 SPT High Tech ■ 15-18 ■ PC
w/Windows OS
Variable based on cutting pattern CL 3300-
4400mm TS 3300x1600mm to 4400 x 2200mm
Pne. pressure beam w/Torsion bar
1 Same as above plus auto. material loading from the lift table.
Prisma 3000 SP ■ 18-25 ■ PC w/Windows OS
Variable based on cutting pattern CL 3300-
4500mm PS 3350x4550mm
■ Pne. split pressure beam for full grip location flexibility
1 Sym. saw carriage guidance syst. Quick change tooling, fully auto dyn. side aligner. Floating grippers, airtables, opt grooving & postform cut.
Prisma 3000 SP X-Cut ■ 25 ■ PC
w/Windows OS
Variable based on cutting pattern CL 3300-
4500mm PS 3300x4500mm
■ Pne. split pressure beam for full grip location flexibility
1 Sym. saw carriage guidance syst. Quick change tooling, auto dyn. side aligner. PM tech. w/X axis grip. , airtables, opt grooving & postform cut.
Prisma 3000 SP Y-Cut ■ 25 ■ PC
w/Windows OS
Variable based on cutting pattern CL 3300-
4500mm PS 3300x4500mm
■ Pne. split pressure beam for full grip location flexibility
1 Same as above. Award-winning PM technology on X & Y axis.
Prisma 3000 SPT ■ 18-25 ■ PC w/Windows OS
Variable based on cutting pattern CL 3300-
4300mm PS 3300x4500mm
■ Pne. split pressure beam for full grip location flexibility
1 Same as SP plus Giben gripper infeed, syst., flexible loading solutions.
Prisma 3000 SPT X-Cut ■ 25 ■ PC
w/Windows OS
Variable based on cutting pattern CL 3300-
4500mm TS 3300x1600mm to 4500x2200mm
■ Pne. split pressurebeam for full griplocation flexibility
1 Same as above.
Prisma 3000 SPT Y-Cut ■ 25 ■ PC
w/Windows OS
Variable based on cutting pattern CL 3300-
4500mm TS 3300x1600mm to 4500x2200mm
■ Pne. split pressure beam for full grip location flexibility
1 Same as SP version plus grip. infeed syst. Giben lifting grippers, flexible loading solutions.
401 SP 401 SPT ■ ■ 36-48 36-48 ■
■ Same Same as above 3500 to 4500mm Pusher stroke 3350 up to 4550
■ ■ Pneumatic
splitpressure beam forfull gripper flex.
1 Symmetrical saw carriage guide syst. double-sided main arbor support. Auto. dynamic double side aligner.Patented gripper infeed on SPT.
Sigma 3000 ■ 30 ■ PC w/Windows OS
Variable based on cutting pattern CL 3300-
4500mm TS 3300x1600mm to 4500x2200mm
■ Pne. split pressure beam for full grip location flexibility
1 Sym. saw carriage guidance syst.,quick change tooling, auto dynamic multiple roller syst, floating grip, pat infeed syst.
Sigma 3000 X-Cut ■ 30 ■ Same Same Same ■ Same 1 Same plus PM tech on the X axis Sigma 3000Y-Cut ■ 30 ■ Same Same Same ■ Same 1 Same plus PM tech on the X & Y
axis Supermatic 17 Supermatic 19 Hypermatic 17 Hypermatic 19
■ ■ ■ ■
48 48 60 60 ■ ■ ■ ■
Same Same as above Per customer requirements ■
■ ■ ■
Pneumatic splitpressure beam forfull gripper flex.
1 Symmetrical saw carriage guide syst. Double-sided main arbor support. Auto. dynamic multiple roller sidealigner, patented gripper infeed syst.
HSC ■ 2 @ 25 ■ Same Same as above Per customer requirements Same as above 1 Same, but with vertical saw
carriage guidance system.
PANEL PROCESSING PANEL SAWS REFERENCE CHART
Product Name/No
Vert
ical
Sl
idin
g Ta
ble
Bea
m
Ang
ular
Motor hp
Man
ual
Sem
iAut
omat
ic
Aut
omat
ic
NC or CNC
Capacity per 8 hr. Shift
Work Piece Size
Scor
ing
Type of Tilt
Type of Hold Down
No.
of O
pera
tors
Special Features
Hyd
raul
ic
Man
ual
Pneu
mat
ic
redbookonline.com RED|BOOK
Tetramatic ■ 2 @ 30 ■ Same Same as above Per customer requirements Same as above 1 Same as above, but with vertically-
opposed symmetical saw carriageguidance system.
ICON2 105 ICON 2 125 ■
■ 18 25 ■ ■ Same Variable based on
cutting pattern CL rip 4400mm CL cross 15500mm TS 4400x1600mm to 4400 x2200mm
■ ■ Steel
pneumaticpress. beam w/torsion bar mech.
1 A compact angular offering high prod. output in approx. same floor space as conven. rear load mach. Rips & crosscuts w/o need to rotate strips manualy
Hendrick, 36 Commercial St., Salem, MA 01970 (978) 741-3600 www.hendrickmanufacturing.com PRO-V ■ 9/12 hp ■ Med. Prod. 4’,5’,6’,8’ or
10’ ■ Pneumatic 1 Three cutting modes: normal, reciprocating and scoring
HP-3 ■ 9/12 hp ■ CNC High Prod. 4’,5’,6’,8’ or 10’ ■ Pneumatic Same as above.
HPP Vertical bevel ■ 9/12 hp 9/12 hp ■
■ CNC CNC High Prod. 5’,8’, 10’
4’,5’,6’,8’ or 10’
■
■ Pneumatic Pneumatic 1 1 Unique vertical machine w/ jump
scoring Three cutting modes: normal, reciprocatingand scoring
HPS ■ 5/7.5 hp ■ Med. Prod 4’,5’,6’,8’,10’ or 12’ ■ Pneumatic 1 Custom table configurations
CTCS ■ 5/7.5 hp ■ Med. Prod 4’ ■ 1 Post form countertop cutting station US-X ■ 12 hp ■ CNC High Prod. 28” or 50” ■ Pneumatic 1 Crosscut beam saw with
jumpscoring option SRP ■ 16/24 hp ■ CNC High Prod. 8’,10’,12’ ■ Pneumatic 1 Solid back table configurations
forcutting small parts. PC controller w/onboard optimization standard
NRP ■ 16/24 hp ■ CNC Ind. High Prod. 8’,10’,12’ ■ Pneumatic 1 High speed material indexing and sawcarriage traverse. PC controller w/onboard optimization standard
URP ■ 16/24 hp ■ CNC Ind. High Prod. 8’,10’,12’ ■ Pneumatic 1 Wide format beam saw w/ customlengths and up to 8” depth of cut. PC controller w/ onboardoptimization standard
Holz-Her, a division of Weinig, P.O. Box 3158, Mooresville, NC 28117 (704) 799-0100, (800) 666-8533 www.weinigusa.com #1265S ■ 4 hp ■ Custom shop 62” x 125” ■ Mechanical 1 SuperCut scoring. #1255 ■ 5.5 hp ■ Custom shop 74” x 169” ■ Mechanical 1 SuperCut scoring. #1260 ■ 5.5 hp ■ Med. prod. 74” x 169” ■ Mechanical 1 SuperCut scoring. #1270 ■ 4 hp ■ Med. prod. 74” x 169” ■ Mechanical 1 SuperCut scoring. Cut 70 ■ 15 hp ■ CNC Med. prod. up to 12’ x 12’ ■ Pneumatic 1 THK guides, rack & pinion drives. Cut 85 ■ 20 hp ■ CNC High prod. up to 14’ x 14’ ■ Pneumatic 1 Front & rear load. Cut 110 ■ 25 hp ■ CNC Industry-High prod. up to 14’ x 14’ ■ Pneumatic 1 Front & rear load.
Joos USA Inc., 680 Madison Ave., Manalapan, NJ 07726 (732) 786-0490 www.joosusa.com Mayer PS 9 100 ■ 20 ■ CNC Variable ±300
sheets up to 12 ft ■ Beam 1 PC w/ diagnostics & technology database.
Mayer PS 2 120 ■ 28 ■ CNC Variable ±400 sheets up to 14 ft ■ Beam 1 Same as above.
Mayer PS 2 140 ■ 35 ■ CNC Variable ±500 sheets up to 14 ft ■ Beam 1 Same as above.
Mayer PS 2 200 ■ 54 ■ CNC Variable ±700 sheets up to 14 ft ■ Beam 1 Same as above.
Mayer PS250 ■ ■ up to 100 ■ CNC Variable custom ■ Beam 1 Same as above. Laguna Tools Inc.,17101 Murphy Ave.,Irvine,CA 92614 (800) 234-1976 or (949) 474-1200 www.lagunatools.com
Robland Z3200 ■ 7.5 hp ■ 10' length 3/4 hp ■ Manual 1 Robland Z2500 ■ 7.5 hp ■ 8' length 3/4 hp ■ Manual 1 18” blade diameter, 54” rip. Z3800 ■ 7.5 hp ■ 12’ panels 3/4 hp ■ Manual Same as above Laguna 2700 ■ ■ 4.5 hp ■ 4’ x 9’ panels 1 hp ■ Manual Signature Series ■ ■ 9 hp ■ 5’ x 10’ panels 1 hp ■ Manual C45 ■ ■ 7.5 hp ■ Med. prod. 10-1/2” ■ ■ Mechanical 1 Auto-Star-Delta start NZ3200 ■ ■ 7.5 hp ■ Med. prod. 10-1/2” ■ Mechanical 1 Dust collect., opt. auto tilting blade PRO27 ■ ■ 4.5 hp ■ Med. prod. 9’ ■ ■ Mechanical 1 Entry level
Lobo Machinery Corp., 13731 Proctor Ave., City of Industry, CA 91746 (626) 369-6500 www.lobomachine.com SC-H5 ■ ■ 4 hp ■ 129” x 62” Pressure shoe TSP-3200 ■ ■ 9 hp ■ 10’ x 5’ ■ ■ TSP-10A ■ 10 hp ■ NC Max. 16’x16’
Custom sizes avail.
■ Pressure beam Auto cutting length travel, pneumatic stops.
TSP-10AAT ■ 10 hp ■ NC Max. 16’x16’ ■ Pressure beam Auto program pusher and cutting cycle, cutting length, screen
PANEL PROCESSING PANEL SAWS REFERENCE CHART
Product Name/No
Vert
ical
Sl
idin
g Ta
ble
Bea
m
Ang
ular
Motor hp
Man
ual
Sem
iAut
omat
ic
Aut
omat
ic
NC or CNC
Capacity per 8 hr. Shift
Work Piece Size
Scor
ing
Type of Tilt
Type of Hold Down
No.
of O
pera
tors
Special Features
Hyd
raul
ic
Man
ual
Pneu
mat
ic
redbookonline.com RED|BOOK
display, PC control, on-line available front or side loading system.
TSP-1030D ■ 15 hp ■ CNC Max. 16’x16’ ■ Pressure beam Same. TSP-330R ■ 25 hp ■ CNC Max. 16’x16’ ■ Pressure beam Same except front or rear loading. TRS 1014 ■ 40 hp ■ Pressure rollers Feed trough, multiple cutting.
Martin Woodworking Machines Corp., 8107-M Arrowridge Blvd., Charlotte, NC 28273 (704) 525-3963 www.martin-usa.com Martin T74 Sliding Table Saw Martin T60 Sliding Table Saw
■ ■ 7.5 ■ ■ ■ ■ 5' x 12' ■ ■ Pneumatic or manual 1 Angular tilting.
Midwest Group One, 2645 26th Ave. S., Minneapolis, MN 55406 (612) 721-5347 www.midwestgroupone.com CS 4330/5840/5347 Cutting Stations ■ ■ 5.0 ■ ■ Variable Countertops,
Solid surface, panels 4 pneumatic
clamps 1 Cuts miters and drawbolts slots. Uses optional laser and variable mitre kit to increase productivity.
Mini Max USA, 2475 Satellite Blvd., Duluth, GA 30096 (770) 813-8818 or (800) 292-1850 www.minimax-usa.com Mini Max SC 3W ■ 4.8 or 6.6 ■ 4' x 8' ■ ■ Eccentric clamp 1 63" Crosscut capacity, 50" rip
capacity, Hardened Steel Guideways, outfeed extension table, Sliding Table Lock.
Mini Max SC4W ■ 4.8 or 9 ■ 4' x 8' ■ ■ Eccentric clamp 1 63" Crosscut capacity, 50" rip capacity, outfeed Extension Table, mitre gauge with fence, telescopic support arm.
Mini Max S315WS ■ 4.8 or 9 ■ 5' x 9' ■ ■ Eccentric clamp 1 109" Crosscut capacity, 50" rip capacity, separate motor scoring, mitre gauge with fence, dial indicator for tilt, cast iron rip support with microadjustment, 2 position table lock, external scoring adjustments.
Mini Max Formula S35 ■ 9 ■ 5' x 10' ■ ■ Eccentric clamp 1 126" crosscut capacity w/sliding
table, Gantry Mounted overarm saw guard, cast iron rip fence support, rip capacity 59", separate motor scoring (1hp), height and tilt adjustment by hand wheels on front of machine.
Mini Max Formula S40 ■ 12 ■ 5' x 10' ■ ■ Eccentric clamp 1 126" crosscut capacity, Gantry
Mounted swinging overarm saw guard, cast iron rip fence support, rip capacity 59", separate mitre gauge with fence, 3-speed main blade, power raise and lower, programmable powered rip fence w/digital readout. Opt. 144" Stroke.
Multiscore Mfg. Co., 15-7157 Honeyman St., Delta, BC Canada V4G 1E2 (604) 946-6130 www.multiscore.com Model 21 System (Rip/Crosscut) ■ 20–60 ■ 2000 panels 5' x 10' Opt. Roller 3 Sawing and/or grooving. Model MR-21 Rip Saw Gang Rip 20–200 ■ 4000 panels 62” width Roller 1 Sawing and/or grooving. MC21 Crosscut Saw 20-200 ■ 4000 panels Up to 122” Roller 1 Sawing and/or grooving.
Paul Saws & Systems, A Div. of Koch Ltd., 300 Lake Ridge DR SE, Smyrna GA 30082 (678) 444-5000 www.paulsaws.com K 34 Rip/Crosscut ■ 20-125
■ ■ 6000 panels Up to 8’ x 10’ Opt.
K 34 Rip/Crosscut 5 hp/saw ■ ■ ■ CNC 6000 panels Up to 8’ x 10’ Opt. Powermatic Corp., WMH Tool Group, 2420 Vantage DR, Elgin IL 51026 (847) 851-1000 www.wmhtoolgroup.com
511 Panel Saw ■ ■ 62” ■ 1 Worm drive motor
HPS 67 ■ 5 ■ 5’ x 10’ ¾ HP ■ Eccentric 1 Ball bearing, hardened steel rodways on cartridge; Dado capacity13/16; 50” rip capacity; separatescoring motor; 4” cutting depth
HPS 126 ■ 7.5 ■ 5’ x 10’ ¾ HP ■ Eccentric 1 54” rip capacity, sep. scoring motor;5” cutting depth over arm guard.
PANEL PROCESSING PANEL SAWS REFERENCE CHART
Product Name/No
Vert
ical
Sl
idin
g Ta
ble
Bea
m
Ang
ular
Motor hp
Man
ual
Sem
iAut
omat
ic
Aut
omat
ic
NC or CNC
Capacity per 8 hr. Shift
Work Piece Size
Scor
ing
Type of Tilt
Type of Hold Down
No.
of O
pera
tors
Special Features
Hyd
raul
ic
Man
ual
Pneu
mat
ic
redbookonline.com RED|BOOK
Progressive Systems Inc., 800 McKinley St. NW, Anoka, MN 55303 (800) 841-1392 www.progressivesys.com
PSI RF4-40/3085Panel sizer 10-40 hp
speeddependent
■ ■ 30 ppm on 4 x 8Size dependent 3’-5’ wide 4’-
10’ long 1/8”-1-1/2” thick
■ Indiv. air cushion loaded poly rollsover driven feed
Balanced feed rolls, indiv. air loaded hold-downs & psi precision feed chain square panel sizing @ max. feed rates.
PSI RF/CF Two Pass Cut to Size System 10-40 hp ■ ■ trim split @300-400
Size dependent 3’-12’ wide 6’-35’ long1/8”-6” thick 3’x3’ min output
■ Same & powered vertical adjust on rails & bearings
Same as above plus sound enclosure on trim/hog saws. Scoring saws w/ easy adjust. CNC w/Sony scale saw position reference.
PSI RF 4/6/8 Roll Feed 10-300 hp ■ ■ Size dependent 100-
300 fpm 1/8” - 6” thickness
2’-9’ wide 3’-40’ long1” min rip width1/8”-6” thick
■ Same & air loaded press plate holddown at saw arbor
4, 6, or 8, balanced feed rolls, indiv. & full length air cushion loadedpress rolls for positive straight feeding of panels.
PSI RF 4/6/8 Roll Feed Siding-Groover & Flange Profiler
10-150 hp ■ ■ Grooving quantity dep. 100-300 fpm 2’- 5 wide 6’-
24’ long6”x12” siding 1/4”-3/4” thick
■ Same & air loaded press plate holddown at saw arbor
4, 6, or 8, balanced feed rolls, indiv. & full length air cushion loadedpress rolls for positive straight feeding of panels. PSI high speed spindle.
PSI SB/DC 40/50/60/80Dip Chain 75-150 hp ■ ■ Thickness & saw
dependent30-200 fpm
2’-12’ wide 3’-24’ long3/4” min rip w1/4”-3-1/2” thick
Same & air loaded press plate holddown at saw arbor
Slat bed feed system w/replaceablepolyurethane inserts mounted on PSI feed chains w/air cushion loaded-press rolls.
PSI T/ACC-4/12 Trim & Angular Flying
10-30 hp ■ ■ Size dep. cont. line speed 50-200 fpm
2’-12’ wide cont. input length ■ Staggered air
cush. loaded poly rolls
Trim multi-split, cut to length cont. process panels. CNC adjusted splitting saws
PSI RCC 2/10 Reciprocating Crosscut 10-60 hp ■ ■ Size dep., cont. line
speed 50-600 fpm 2’-10’ wide cont. input length Air actuated hold
down beam Saw reciprocates on rails & bearings, w/oil mist lubrication. Servo motor carriage.
Riebling Machinery, 1511 Rte. 22, Ste. 309, Brewster, NY 10509 (914) 668-4800 www.riebling.com Shark ■ 9 hp ■ 5’ x 10’ ■ ■ Pneumatic 1 3 & 4 axis control, electric tilt
&height of blade. KS320P ■ 9 hp ■ 5’ x 10’ ■ ■ Pneumatic 1
SCM Group North America Inc., 2475 Satellite Blvd., Duluth, GA 30096 (770) 813-8818 www.scmgroup-usa.com Sigma Prima N ■ 12 hp ■ CNC 10.5 x 12.5 ■ Pressure beam 1 Magnetic pusher measurement,
airflotation tables, automatic side align.,desktop PC, quick blade change
Sigma Impact 85K ■ 18 hp ■ CNC 10.5 to 14.5 ■ Pressure beam 1 High speed servo driven rack & pinioncarriage/pusher. PC/Windows interfacewith onboard optimizer, automatic sidealigners, quick blade change
Sigma Impact 107C/D ■ 18/24 hp ■ CNC 10.5 to 14.5 ■ Pressure beam 1 Same as above. Gabbiani Galaxy 125L ■ 24 hp ■ CNC 10.5 to 14.5 ■ Pressure beam 1 Same as above w/ prismatic
guidewaysin carriage Gabbiani Galaxy 125HS ■ 30 hp ■ CNC 10.5 to 14.5 ■ Pressure beam 1 High speed carriage w/ prismatic
guideways, auto scoring, grooving, optimized beam w/ automatic side aligners
Gabbiani Galaxy 125T HS ■ 30 hp ■ CNC 10.5 to 14.5 ■ Pressure beam 1 Same as above plus rear lift w/
lead screwspowered rollers, optional tri-lateral loading, thin panel loading, turntable
Gabbiani Galaxy T3 130 ■ 30 hp ■ CNC 10.5 to 14.5 ■ Pressure beam 1 Servo controlled blade height, auto
scoring& grooving, easily removed base panels, motorized side aligners, prismatic guidesin carriage/pusher
Gabbiani Galaxy 140/140T ■ 30 hp ■ CNC 10.5 to 14.5 ■ Pressure beam 1 High speed carriage w/
prismatic.guideways, auto scoring, grooving,optimized beam w/ automatic side aligners
Gabbiani Axioma 105/125 ■ 24/30 hp ■ CNC 10.5 to 14.5 ■ Pressure beam 1 Same as above. Gabbiani Ocean 160 ■ 50 hp ■ CNC 10.5 to 14.5 ■ Pressure beam 1 Same as above.
Safety Speed Manufacturing, 13943 Lincoln St. N.E., Ham Lake, MN 55304 (763) 755-1600 www.safetyspeed.com Model C4 ■ 3-1/4 hp ■ W: 50" L: 96”
1.75" thick ■ Spring arm 1 Zinc plated guide tubes, plastic rollers, spring loaded syst, vert & horiz.
Model C5 ■ 3-1/4 hp ■ W: 64" L: 96” 1.75" thick ■ Spring arm 1 Zinc plated guide tubes, plastic
rollers, spring loaded syst, vert & horiz.
Model H4 ■ 3-1/4 hp ■ W: 50" L: Unlim. 1.75" thick
■ Spring arm 1 Same as above
Model H5 ■ 3-1/4 hp ■ W: 64" L: ■ Spring arm 1 Same as above
PANEL PROCESSING PANEL SAWS REFERENCE CHART
Product Name/No
Vert
ical
Sl
idin
g Ta
ble
Bea
m
Ang
ular
Motor hp
Man
ual
Sem
iAut
omat
ic
Aut
omat
ic
NC or CNC
Capacity per 8 hr. Shift
Work Piece Size
Scor
ing
Type of Tilt
Type of Hold Down
No.
of O
pera
tors
Special Features
Hyd
raul
ic
Man
ual
Pneu
mat
ic
redbookonline.com RED|BOOK
Unlim. 1.75" thick
Model H6 ■ 3-1/4 hp ■ W: 76" L: Unlim. 1.75" thick ■ Spring arm 1 Same as above
Model 6400 ■ 3 hp, worm drive ■ W: 64" L:
Unlim. 1.75" thick
■ Spring arm 1 Chrom plated tube guides, alum rollers, counterweight vert. & horiz. rulers
Model 6800 ■ 3 hp, worm drive ■ W: 74" L:
Unlim. 1.75" thick
■ Spring arm 1 Same as above
Model 7400 ■ 2 or 3 hp induction ■ W: 64" L:
Unlim. 2.125" thick
■ ■ Floating pressuresaw foot
1 Dual V-track guide syst., alum rollers, counterweight syst, midway fence, vert& horiz rulers
Model 7400XL ■ 2 or 3 hp induction ■ W: 64" L:
Unlim. 2.125" thick
■ ■ Floating pressuresaw foot
1 Same as above
Model ES52 ■ 5 hp or 7 hp induction ■ W: 61” L:
Unlim. 2.25” thick
■ ■ Floating pressuresaw foot
1 European style traveling carriage. Opt. scoring syst., adjust grid, midway fence,vert & horiz rulers w/stops
SR-5 Panel saw/router ■ 3-1/4 hp ■ W: 62" L:
Unlim 1.75" thick
■ Spring arm 1 Counterweight syst., vert. & horiz. rulers, midway fence w/stop, adj. floating router head
SR-5U Panel saw/router ■ 3 hp worm
drive ■ W: 62" L: Unlim 1.75" thick
■ Spring arm 1 Counterweight syst., vert. & horiz. rulers, midway fence w/stop, adj. floating router head
SawTrax Mfg. Inc., 3694 Kennesaw S. Ind. Drive, Ste. A, Kennesaw, GA 30144 (770) 974-0021 www.sawtrax.com C52VP ■ 3 1 hp ■ 65"x42"x78" optional
add on ■ Spring arm
Optional Sheet Clamp
1 Varsity and 1000 Series Pkg - Standard Equipment, Dust Port, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Dual Rip Gauge, Saw Motor Bracket, 15 amp Porter Cable saw on a spinning insert and a 24 tooth carbide saw blade
C64VP ■ 3 1 hp ■ 65"x42"x90 Optional add on
■ Spring arm Optional Sheet Clamp
1 Varsity and 1000 Series Pkg - Standard Equipment, Dust Port, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Dual Rip Gauge, Saw Motor Bracket, 15 amp Porter Cable saw on a spinning insert and a 24 tooth carbide saw blade
1052 ■ 3 1 hp ■ 122"x42"x78" Optional add on
■ Spring Arm Optional Sheet Clamp
1 Varsity and 1000 Series Pkg - Standard Equipment, Dust Port, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Dual Rip Gauge, Saw Motor Bracket, 15 amp Porter Cable saw on a spinning insert and a 24 tooth carbide saw blade
1064 ■ 3 1 hp ■ 122"42"90" Optional add on
■ Spring arm Optional Sheet Clamp
1 Varsity and 1000 Series Pkg - Standard Equipment, Dust Port, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Dual Rip Gauge, Saw Motor Bracket, 15 amp Porter Cable saw on a spinning insert and a 24 tooth carbide saw blade
1076 ■ 3 1 hp ■ 122"x42"x102"
Optional add on
■ Spring arm Optional Sheet Clamp
1 Varsity and 1000 Series Pkg - Standard Equipment, Dust Port, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Dual Rip Gauge, Saw Motor Bracket, 15 amp Porter Cable saw on a spinning insert and a 24 tooth carbide saw blade
1088 ■ 3 1 hp ■ 122"x42"x114"
Optional add on
■ Spring arm Optional Sheet Clamp
1 Varsity and 1000 Series Pkg - Standard Equipment, Dust Port, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Dual Rip Gauge, Saw Motor Bracket, 15 amp Porter Cable saw on a spinning insert and a 24 tooth carbide saw blade
10100 ■ 3 1 hp ■ 122"42"126" Optional add on
■ Spring arm Optional Sheet Clamp
1 Varsity and 1000 Series Pkg - Standard Equipment, Dust Port, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop,
PANEL PROCESSING PANEL SAWS REFERENCE CHART
Product Name/No
Vert
ical
Sl
idin
g Ta
ble
Bea
m
Ang
ular
Motor hp
Man
ual
Sem
iAut
omat
ic
Aut
omat
ic
NC or CNC
Capacity per 8 hr. Shift
Work Piece Size
Scor
ing
Type of Tilt
Type of Hold Down
No.
of O
pera
tors
Special Features
Hyd
raul
ic
Man
ual
Pneu
mat
ic
redbookonline.com RED|BOOK
Bar & Measuring Tapes, Dual Rip Gauge, Saw Motor Bracket, 15 amp Porter Cable saw on a spinning insert and a 24 tooth carbide saw blade
2052 ■ 3 1/4 worm drive
■ 122"x42"x78" Optional add on
■ Spring arm Optional Sheet Clamp
1 2000 Series Pkg - Standard Equipment, Dust Port, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Dual Rip Gauge, Spinning Saw Insert, 15 amp Worm Drive Saw with toggle power switch, Dust Hood, Dust Collection Upgrade, Steel Sleeved Material Rollers , 24 tooth Carbide saw blade
2064 ■ 3 1/4 worm drive
■ 122"x42"x90" Optional add on
■ Spring arm Optional Sheet Clamp
1 2000 Series Pkg - Standard Equipment, Dust Port, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Dual Rip Gauge, Spinning Saw Insert, 15 amp Worm Drive Saw with toggle power switch, Dust Hood, Dust Collection Upgrade, Steel Sleeved Material Rollers , 24 tooth Carbide saw blade
2076 ■ 3 1/4 worm drive
■ 122"x42"x102"
Optional add on
Spring arm Optional Sheet Clamp
1 2000 Series Pkg - Standard Equipment, Dust Port, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Dual Rip Gauge, Spinning Saw Insert, 15 amp Worm Drive Saw with toggle power switch, Dust Hood, Dust Collection Upgrade, Steel Sleeved Material Rollers , 24 tooth Carbide saw blade
3050 ■ Milwaukee 10" Blade
■ 122"x42"78" Optional add on
■ Spring arm Optional Sheet Clamp
1 3000 Series Pkg - Standard Equipment, Dust Port, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Dual Rip Gauge, Spinning Saw Insert, 15 amp Milwaukee 10" Saw, Dust Hood, Dust Collection Upgrade, Steel Sleeved Material Rollers and a general purpose blade
3062 ■ Milwaukee 10" Blade
■ 122"x42"x90" Optional add on
■ Spring arm Optional Sheet Clamp
1 3000 Series Pkg - Standard Equipment, Dust Port, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Dual Rip Gauge, Spinning Saw Insert, 15 amp Milwaukee 10" Saw, Dust Hood, Dust Collection Upgrade, Steel Sleeved Material Rollers and a general purpose blade
3074 ■ Milwaukee 10" Blade
■ 122"x42"x102"
Optional add on
■ Spring arm Optional Sheet Clamp
1 3000 Series Pkg - Standard Equipment, Dust Port, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Dual Rip Gauge, Spinning Saw Insert, 15 amp Milwaukee 10" Saw, Dust Hood, Dust Collection Upgrade, Steel Sleeved Material Rollers and a general purpose blade
C52SM ■ 3 1 ■ 65"x42"x78" Optional add on
■ Spring arm Optional Sheet Clamp
1 Sign Maker's Pkg - Standard Equipment, Dust Hood, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Spring Hold Down, OLFA Knife Cutter Insert, Dual Rip Gauge, Makita 7 1/4 inch saw on a spinning saw insert plate and a 24 tooth Carbide saw blade
C64SM ■ 3 1 ■ 65"x42"x90" Optional add on
■ Spring arm Optional Sheet Clamp
1 Sign Maker's Pkg - Standard Equipment, Dust Hood, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Spring Hold Down, OLFA Knife Cutter Insert, Dual Rip Gauge, Makita 7 1/4 inch saw on a spinning saw insert plate and a 24 tooth Carbide saw blade
FS52SM ■ 3 1 ■ 122"x42"x78" Optional add on
■ Spring arm Optional Sheet
1 Sign Maker's Pkg - Standard Equipment, Dust Hood, Dust
PANEL PROCESSING PANEL SAWS REFERENCE CHART
Product Name/No
Vert
ical
Sl
idin
g Ta
ble
Bea
m
Ang
ular
Motor hp
Man
ual
Sem
iAut
omat
ic
Aut
omat
ic
NC or CNC
Capacity per 8 hr. Shift
Work Piece Size
Scor
ing
Type of Tilt
Type of Hold Down
No.
of O
pera
tors
Special Features
Hyd
raul
ic
Man
ual
Pneu
mat
ic
redbookonline.com RED|BOOK
Clamp Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Spring Hold Down, OLFA Knife Cutter Insert, Dual Rip Gauge, Makita 7 1/4 inch saw on a spinning saw insert plate and a 24 tooth Carbide saw blade
FS64SM ■ 3 1 ■ 122"x42"x90" Optional add on
■ Spring arm Optional Sheet Clamp
1 Sign Maker's Pkg - Standard Equipment, Dust Hood, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Spring Hold Down, OLFA Knife Cutter Insert, Dual Rip Gauge, Makita 7 1/4 inch saw on a spinning saw insert plate and a 24 tooth Carbide saw blade
FS76SM ■ 3.1 ■ 122"x42"x102"
Optional add on
■ Spring arm Optional Sheet Clamp
1 Sign Maker's Pkg - Standard Equipment, Dust Hood, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Spring Hold Down, OLFA Knife Cutter Insert, Dual Rip Gauge, Makita 7 1/4 inch saw on a spinning saw insert plate and a 24 tooth Carbide saw blade
FS88SM ■ 3 1 ■ 122"x42"x114"
Optional add on
■ Spring arm Optional Sheet Clamp
Sign Maker's Pkg - Standard Equipment, Dust Hood, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Spring Hold Down, OLFA Knife Cutter Insert, Dual Rip Gauge, Makita 7 1/4 inch saw on a spinning saw insert plate and a 24 tooth Carbide saw blade
FS100SM ■ 3.1 ■ 122"x42"x126
Optional add on
■ Spring arm Optional Sheet Clamp
1
Schelling America Inc., P.O. Box 80367, Raleigh, NC 27623 (919) 544-0430 www.schelling.com fh 4330 Auto ■ 21 hp ■ CNC 10’ ■ Pressure Beam 1 3.3” blade exposure, Evolution
tech.Sep. pushoff carriage & feeder unitfor reduced cycle time. Max. saw travel speed 380ft/min. Open platform-Windows XP operatingsystem. DUPLUS option (two feedersfor crosscutting)
fh 4330 Manual ■ 21 hp ■ CNC 10’ ■ Pressure Beam 1 3.3” blade exposure, Evolution tech.Max. saw travel speed 380ft/min.Open platform-Windows XPoperating system. DUPLUS option(two feeders for crosscutting)
fh 4430 Auto ■ 21 hp ■ CNC 12’ (14’) ■ Pressure Beam 1 3.3” blade exposure, Evolution tech.Sep. pushoff carriage & feeder unitfor reduced cycle time. Max. sawtravel speed 380ft/min. Openplatform-Windows XP operatingsystem. DUPLUS option (two feedersfor crosscutting
fh 4430 Manual ■ 21 hp ■ CNC 12’ (14’) ■ Pressure Beam 1 3.3” blade exposure, Evolution tech.Max. saw travel speed 380ft/min.Open platform-Windows XPoperating system. DUPLUS option(two feeders for crosscutting)
fh 6330 Auto ■ 37 hp ■ CNC 10’ ■ Pressure Beam 1 5.3” blade exposure, Evolution tech.Sep. pushoff carriage & feeder unitfor reduced cycle time. Max. saw travel speed 500ft/min. Openplatform-Windows XP operating system.
fh 6330 Manual ■ 37 hp ■ CNC 10’ ■ Pressure Beam 1 5.3” blade exposure, Evolution tech. Max. saw travel speed 500ft/min.Open platform-Windows XPoperating system.
fh 6430 Auto ■ 37 hp ■ CNC 12’ (14’) ■ Pressure Beam 1 5.3” blade exposure, Evolution tech.Sep. pushoff carriage & feeder unitfor reduced cycle time. Max. sawtravel speed 500ft/min. Openplatform-Windows XP operating system.
fh 6430 Manual ■ 37 hp ■ CNC 12’ (14’) ■ Pressure Beam 1 5.3” blade exposure, Evolution tech.Max. saw travel speed 500ft/min.Open platform-Windows
PANEL PROCESSING PANEL SAWS REFERENCE CHART
Product Name/No
Vert
ical
Sl
idin
g Ta
ble
Bea
m
Ang
ular
Motor hp
Man
ual
Sem
iAut
omat
ic
Aut
omat
ic
NC or CNC
Capacity per 8 hr. Shift
Work Piece Size
Scor
ing
Type of Tilt
Type of Hold Down
No.
of O
pera
tors
Special Features
Hyd
raul
ic
Man
ual
Pneu
mat
ic
redbookonline.com RED|BOOK
XPoperating system. fh 6580 Auto ■ 37 hp ■ ■ CNC 19’ ■ Pressure Beam 1 5.3” blade exposure, Evolution
tech.Sep. pushoff carriage & feeder unitfor reduced cycle time. Max. sawtravel speed 500ft/min. Openplatform-Windows XP operating system.
fh 6580 Manual ■ 37 hp ■ CNC 19’ ■ Pressure Beam 1 5.3” blade exposure, Evolution tech.Max. saw travel speed 500ft/min.Open platform-Windows XPoperating system.
fh 8330 Auto ■ 45 hp ■ CNC 10’ ■ Pressure Beam 1 6.5” blade exposure, Evolution tech,Sep. pushoff carriage & feeder unitfor reduced cycle time. Max. sawtravel speed 500ft/min. Openplatform-Windows XP operating system.
fh 8330 Manual ■ 45 hp ■ CNC 10’ ■ Pressure Beam 1 Same but w/o pushoff carriage &feeder unit
fh 8430 Auto ■ 45 hp ■ CNC 12’ (14’) ■ Pressure Beam 1 Same as 8330 Auto. fh 8430 Manual ■ 45 hp ■ CNC 12’ (14’) ■ Pressure Beam 1 Same as 8330 Manual. fh 8580 Auto ■ 45 hp ■ CNC 19’ ■ Pressure Beam 1 Same as 8330 Auto. fh 8580 Manual ■ 45 hp ■ CNC 19’ ■ Pressure Beam 1 Same as 8330 Manual. ah 6 ■ 37 hp ■ CNC 10’, 12’, 19’, > ■ Pressure Beam 1 Custom specific configs possible. ATH ■ 85 (100
opt) ■ CNC 10’, 12’, 19’, > ■ Pressure Beam 1 Custom specific configs possible. ASH ■ 100 hp ■ CNC 10’, 12’, 19’, > ■ Pressure Beam 1 Custom specific configs possible. Silver Machine Inc., 160 W. Beaver Creek Road, Unit 3, Richmond Hill, ON L4B 1B4 Canada (888) 354-3388
www.silvermachineinc.com SF-45 ■ 7.5 ■ 118”w x 4”
thick ■ 1 Motorized blade height.
SF-45A ■ 7.5 ■ 126”w x 4” thick
■ 1 Motorized blade height.
SMP-330 ■ 20 ■ 10’ ■ Pressure Beam 1 120” crosscut capacity
SMJ-3200A ■ 45˚ 7.5 hp ■ 10’ ■ 1 Round steel rail, 2 saw speeds, Tilting blade, power elevation for saw blade
SMJ-2500A ■ 45˚ 5 hp ■ 8’ ■ 1 Same as above.
SBS-120 ■ 18 hp ■ CNC 128” ■ Pressure beam 1 High speed up to 100m/min programmable saw blade projection
Stiles Machinery Inc., 3901/3965 44th St. SE, Grand Rapids, MI 49512 (616) 698-7500 www.stilesmachinery.com Holzma HPP 230 ■ 10 x CNC 125+ 5’ x 12’ ■ Pressure beam 1 PC-based CADmatic control, rack
& pinion driven saw carriage, auto length & speed, touch free magnetic measuring system, ability to add online label printing.
Holzma HPP 250
■
12
■ CNC 175+ 5’ x 12’ ■
Pressure beam 1
PC-based CADmatic control, rack & pinion driven saw carriage, auto cut height, length, & speed, touch free magnetic measuring system, ability to add online label printing.
Holzma HPP 350
■
18
■ CNC 250+ panels 5’ x 12’ ■
Pressure beam 1
PC-based CADmatic control, rack & pinion driven saw carriage, auto cut height, length, & speed, touch free magnetic measuring system, ability to add online label printing, exceptionally high op. speeds, and wide range specialty cutting capabilities.
Holzma HPP 380 ■ 28 ■ CNC 300+ panels 5' x 12' ■ Pressure beam 1 PC-based CADmatic control, rack & pinion driven saw carriage, auto cut height, length, & speed, touch free magnetic measuring system, ability to add online label printing, exceptionally high op. speeds, and wide range specialty cutting capabilities.
Holzma HPL 11 Optimat
■ 28 ■ CNC 400+ panels 5’ x 12’ ■ Pressure beam 1 Same as above.
Holzma HPL 410
■
28 ■ CNC 400+ panels 5’ x 12’ ■ Pressure beam 1 Automatic infeed, thin panel infeed devices standard. PC-based CADmatic control, rack & pinion driven saw carriage, auto cut height, length, & speed, touch free magnetic measuring system, ability to add online label printing,
PANEL PROCESSING PANEL SAWS REFERENCE CHART
Product Name/No
Vert
ical
Sl
idin
g Ta
ble
Bea
m
Ang
ular
Motor hp
Man
ual
Sem
iAut
omat
ic
Aut
omat
ic
NC or CNC
Capacity per 8 hr. Shift
Work Piece Size
Scor
ing
Type of Tilt
Type of Hold Down
No.
of O
pera
tors
Special Features
Hyd
raul
ic
Man
ual
Pneu
mat
ic
redbookonline.com RED|BOOK
exceptionally high op. speeds, and wide range specialty cutting capabilities.
Holzma HPL 530
■
40
■
CNC 500+ panels 5' x 12'
■
Pressure beam 1 Automatic infeed, thin panel infeed devices standard. PC-based CADmatic control, rack & pinion driven saw carriage, auto cut height, length, & speed, touch free magnetic measuring system, ability to add online label printing, exceptionally high op. speeds, and wide range specialty cutting capabilities.
Holzma HPL 570 ■ 58 ■ CNC 750+ panels 5' x 12' ■ Pressure beam 1 Automatic infeed, thin panel infeed devices standard. PC-based CADmatic control, rack & pinion driven saw carriage, auto cut height, length, & speed, touch free magnetic measuring system, ability to add online label printing, exceptionally high op. speeds, and wide range specialty cutting capabilities.
Stiles Shop Solutions, 3965 44th St. S.E., Grand Rapids, MI 49512 (616) 698-8456 www.stilesshopsolutions.com Altendorf WA 6 ■ 4 ■ 8’ x 10’ up to
3” thick ■ ■ 1 Shimless scoring Altendorf WA 8M ■ 7.5 ■ 10’ x 10’ up to
5” thick ■ ■ 1 Same as above WA 8 ■ 7.5 ■ 10’ x 10’ - Up
to 3” thick ■ Pneumatic Avail. 1 Motorized blade height & tilt. Digital readout for the tilt angle & RAPIDO(shimless) scoring.
Altendorf WA 80 ■ 7.5 ■ 10’ x 10’ - Up to 5” thick ■ Pneumatic Avail. 1 Eye-level control, motorized tilt,
shimless scoring F-45 Standard ■ 7.5 - 10 ■ 10' x 10' - Up
to 5.8125” thick
■ Pneumatic Avail. 1 RAPIDO scoring, motorized blade tilt & height, w/ digital readouts.
F-45 Challenger ■ 7.5 - 10 ■ 10' x 10' - Up to 5.8125" thick
■ Pneumatic Avail. 1 Motorized rip fence, blade height & tilt, RAPIDO scoring, digital readouts.
F-45 Select ■ 7.5 - 10 ■ 10' x 10' - Up to 5.8125" thick
■ Pneumatic Avail 1 Motorized rip fence, motorized blade height & tilt, RAPIDO (shimless)scoring, digital readouts.
F-45 Elmo 3 ■ 7.5 - 10 ■ NC 10' x 10' - Up to 5.8125" Thick
■ Pneumatic Avail 1 Motorized rip fence, motorized blade height & tilt, RAPIDO (shimless)scoring, dig. readouts, motorized adj.
F-45 Elmo 4 ■ 7.5 - 10 ■ NC 10' x 10' - Up to 5.8125" Thick
■ Pneumatic Avail 1 Motorized rip fence, motorized crosscut fence, motorized height & tilt, RAPIDOscoring, dig. readouts, motorized adj.
Holzma HPP 230 ■ 10 x CNC 125+ 5’ x 12’ ■ Pneumatic pressure beam PC-based CADmatic control,
cut/groove capability, rack & pinion driven saw-carriage, auto cut height, length & speed,touch free magnetic measuring system,ability to add online label printing.
Holzma HPP 250 ■ 12.5 ■ CNC 200+ 5’ x 12’ ■ Same as above Same as above Tech Mark Inc., 7901 Industry Drive, North Little Rock, AR 72117 (800) 787-6747 www.tech-mark.com Rojek PK 300A ■ 3.6 or 6.0
hp ■ 10’ length ■ ■ Eccentric Clamp 1 118” crosscut capacity, 59” rip capacity. Dado capability.
Rojek PF 300L ■ 6.5 or 9.0 hp ■ 10.5’ length ■ ■ Eccentric Clamp 1 126” crosscut capacity, 59” rip cap.
Dado capability, sep. scoring motor.
Rojek PF 400S ■ 9.0 or 12.0 hp ■ 10.5’ length ■ Ele ctric Eccentric Clamp 1 Same as above, plus 16” blade
dia. electric tilt & height adjustment.