paints, marking - plucka.co · working environment when using solvents primary hazards associated...
TRANSCRIPT
PAINT
Fascia, Fence & Gutter 30-06
Line Marking 30-07
Mine Marking 30-10
Primers 30-02
Spray Paint 30-06
Spray Paint – Fluoro 30-13
Stencil Sprays 30-13
Strippers 30-02
Survey Marking 30-09
Thinners 30-01
PAINT ROLLERS 30-14
PRIMERS – PAINT 30-02
SPRAY PAINTING EQUIPMENT 30-19
SPRAYS & ROLLERS – STENCIL 30-13
STENCIL SPRAY & STENCILS 30-13
STRIPPERS – PAINT 30-02
THINNERS – PAINT 30-01
TINS – PAINT 30-19
TRAYS & CONTAINERS – PAINT ROLLER 30-15
WATERPROOFING – PAINT & COATINGS 30-10
APPLICATORS
Line Marking 30-08
Mine Marking 30-10
Survey Marking 30-09
BRUSHES 30-17
COATINGS
Metal Protection 30-03
Rust Treatment 30-05
CRAYONS & CHALK 30-24
DROP SHEETS 30-19
DYES 30-11
EXTENSION HANDLES – ROLLER FRAMES 30-16
GRAFFITI MANAGEMENT 30-13
INKS 30-11
MARKERS
Industrial Pens 30-21
Temperature 30-12
Line 30-07
Mine 30-10
Survey 30-09
PAINTS, MARKING & SPRAY EQUIPMENT
PAIN
TS &
MA
RKIN
GPAINTS, MARKING & SPRAY EQUIPMENT
30
30-01 Call 13 73 23
Thinners & Reducers – Paint
Paint Thinner
®
300C – Enamel Spray Thinner • Fast evaporating
thinner• Suitable for use
with enamel coating products
• Ideal for cleaning and degreasing metal surfaces prior to painting
400D – Industrial Thinner• Slow evaporating thinner• Aromatic thinner• Suitable for use with Galmet Cold
Galvanizing products
500E – Etch Thinner• Fast evaporating solvent action• Suitable for use with Keytite Etch Primer
Type Size Part Number
300C 1L 0027 0147300C 4L 0117 1254300C 20L 0027 0062400D 1L 0410 3107400D 4L 0410 3301500E 1L 0529 5555500E 4L 0491 9353
Lacquer Thinner
1L 4L
20L
• Fast drying to a high gloss finish• Improves paint finishing and
reduces imperfections• General purpose thinner and cleaner• Suitable for automotive, domestic and
industrial applications and finishes• Ideal for thinning lacquers and varnishes
and as a general purpose cleaning solvent (removes gum, some inks and waxes)
Size Part Number
1L 0329 39444L 0044 961620L 0220 7339
Enamel Thinner
1L 4L
20L
• Thins enamel paints for spraying• Fast drying• Removes wax and grease prior to spraying• Improves paint consistency and allows
paint to acquire optimum film characteristics• Suitable for use in surface preparation and
cleaning enamel overspray• Ideal for use in automotive, panel beating
and painting workshops, domestic and industrial applications and finishes
Size Part Number
1L 0220 73054L 0220 732220L 0363 3315
All Purpose Thinner
• Suitable for thinning acrylic and nitrocellulose lacquers, primer surfaces and other products requiring an acrylic or lacquer thinner
4L
Size Part Number
4L 0070 143720L 0070 145460L 0070 1471
USING THINNERS AND PAINT STRIPPERS• Thinners and paint strippers are made up of solvents
• Ensure adequate ventilation, Personal Protective Equipment and a safe working environment when using solvents
Primary hazards associated with solvents: • Many solvents are extremely fl ammable and present a fi re and
explosion hazard
• Solvents can also be toxic – principle routes of exposure are inhalation of vapours, skin contact and/or ingestion of liquids
• Solvents can react violently with acids, resulting in fi res or explosions
Poisons Information Centre: 13 11 26. Australia wide, 24 hours a day.
HANDY HINT
PAIN
TS & M
ARKIN
GPAINTS, MARKING & SPRAY EQUIPMENT
30
30-02blackwoods.com.au
Strippers – Paint
Paint Stripper
• Heavy duty paint remover• Suitable for stripping specialist coatings in the
automotive industry
Size Part Number
4L 0070 0332
Kwik Strip Remover
• Fast-acting paint and varnish remover• Non-drip application• Washes off with water
Size Part Number
250ml 0411 7902500ml 0411 80081L 0411 81054L 0434 7905
GRAFFITI TOWELS• Combines high quality graffi ti remover formula
with an absorbent, abrasive, non-scratching towel• Loosens and removes graffi ti and spray paint,
allowing the towel to absorb and hold residue without redepositing paint on the surface
• Suitable for removing graffi ti, paint, lipstick, grease, ball point ink and crayon
• Ideal for removing graffi ti from aluminium, glass, signage, phone booths, lockers, buses, trains, bathroom walls, painted surfaces, stainless steel, table tops, vinyl and upholstery, elevators and train stations
PART NUMBER 0550 4828
RELATED PRODUCT
SEE HYGIENE, JANITORIAL & CLEANING CHAPTER 11
Paint – Primers
Industrial Primer
®
• Quick drying, industrial anti corrosive primer formulated for use by structural steel fabricators on various types of steelwork exposed to mild conditions
• Excellent base for enamels• May be painted over with a turpentine based paint• Apply by brush, spray or roller• Suitable for steel beams and sections,
garden furniture, fences, gates and exterior steelwork
Colour Size Part Number
Grey oxide 4L 0433 5506Red oxide 4L 0433 5108Red oxide 20L 0141 5500
Spraypaint Primer
Grey Red
®
• Extremely quick drying aerosol primer• Can be top coated with a turpentine based paint• Suitable for factory equipment, garden furniture,
fences, gates and fixtures• Ideal base for Galmet Spraypaint aerosols
Colour Size Part Number
Grey 350g Aerosol 0406 9365Red 350g Aerosol 0406 9382
Keytite Steel Primer
®
• Slow drying single pack alkyd primer designed to penetrate lightly rusted surfaces
• Inclusion of a corrosion inhibiting phosphate pigment serves to passivate the coated metal surface
• Combines steel wetting and flow characteristics for easy application with brush and roller
• Suitable for steel beams and sections, garden furniture, fences, gates and exterior steelwork
• Ideal for use with any Galmet Topcoat product
Colour Size Part Number
Red 350g Aerosol 0549 8112Grey 350g Aerosol 0025 3606Grey 500ml 0433 5807Grey 1L 0098 9016Grey 4L 0098 9033
SAFETY TIPTHE FIRE TRIANGLEA fi re requires three basic components – fuel, oxygen and heat. Removal of any one of the sides of this Fire Triangle will extinguish the fi re.
Keytite Etch Primer (Non-ferrous Metals)
®
• One pack, epoxy etch primer, grey in colour, designed to etch and passivate a variety of ferrous and non-ferrous metals
• Adhesion and barrier properties when used correctly over Galmet Cold Galvanizing and other zinc coatings prior to applying a Galmet Topcoat product
• Can be recoated by most one and two pack coatings
• Suitable for galvanised iron, aluminium, copper, iron, steel, stainless steel and alloys
Size Part Number
350g Aerosol 0098 8897500ml 0098 91011L 0098 89144L 0098 8931
PAIN
TS &
MA
RKIN
GPAINTS, MARKING & SPRAY EQUIPMENT
30
30-03 Call 13 73 23
Keytite Aqua Primer
®
• Water-based anti corrosive grey primer for use on ferrous and non-ferrous metals
• Suitable for galvanised iron, aluminium, iron and steel
• Ideal for use as an isolating coat to Galmet Cold Galvanizing
Size Part Number
1L 0775 14804L 0775 1463
Blue Plus® Primer
®
• Quick drying solvent based aerosol spray primer finish that improves corrosion resistance on steel surfaces
• Designed for touch-up of Onesteel Tubeline® pre-coated steel tubing
• Suitable for steel beams and sections, fences, gates, exterior steelwork and touch-up of Blue Plus® steel
Size Part Number
350g Aerosol 0091 9581
Plastic Primer
• Single coat and highly adhesive primer for use on most types of plastic substrates
• Indoor and outdoor use• Suitable for use on varying types of plastic
including polypropylene, PVC and vinyl• Ideal for use on chairs, tables, plant pots, automotive
dashboards, interiors, guards and other plastic structures
Size Part Number
325g Aerosol 0200 4784
CUPPED SPECIALTY RESPIRATORS – ORGANIC VAPOUR GP2• Activated carbon layer provides protection
against nuisance levels* of organic vapours and odours
• Type ‘G’ class rating is suitable for low vapour pressure (below 1.3 Pa @ 25°C) of many agricultural chemicals, such as pesticides and herbicides
• Proprietary 3M Cool Flow valve reduces heat and moisture build-up in hot and humid working environment
• Robust shell for durability• Suitable for protection against dusts, mists, fume and organic vapours
generated during painting (excluding 2-pack), coating, varnishing, and spraying pesticide, herbicide and fungicide
• Complies with AS/NZS 1716:2012
PART NUMBER 0779 4592
RELATED PRODUCT
SEE SAFETY – PERSONAL PROTECTIVE EQUIPMENT CHAPTER 07
Paint – Metal Protection
Cold Galvanizing Zinc Rich Coating
®
• Organic zinc rich protective coating designed for long-term protection of iron and steel against rust and corrosion
• Provides a long lasting barrier similar in action to galvanising
• Suitable for welds and damaged galvanising, steel structures, tank exteriors, wrought iron, ducting and trailers
Size Part Number
400g Aerosol 0039 2909250ml 0410 2409500ml 0410 25061L 0410 26034L 0410 2807
Cold Galvanizing Zinc
• Long lasting zinc coating compound protects iron and steel from rust and corrosion
• 93% zinc in dry film• Seals out moisture and forms a galvanic cell with iron or steel• Very good resistance to water, oil, petrol and other chemicals• Suitable for use as a flash rust preventative on welded areas• Ideal for protecting machinery, equipment, exhaust stacks, metal
buildings, fences, metal roofs, gutters, downpipes and air conditioning units
Size Part Number
350g Aerosol 0441 4508
Paint – Zinc It
• Suitable for use on transmission towers, structural steel, trailers and guard rails
• Ideal for use on coastal and ship borne installations subject to severe salt water and salt spray corrosion
Zinc It• Convenient zinc rich coating in an aerosol pack• Forms a tough and flexible coating• Single component zinc rich compound with a special epoxy binder• Contains 95% of highest purity zinc when cured• Fuses directly to all clean metal surfaces through electrochemical action to
establish protection against rust and corrosion for an excess of six years• In accordance with ASTM Salt Spray Test
Bright Zinc• Quick drying, zinc rich coating for corrosion protection where a bright galvanised
finish is required• Rich coating which dries to the colour of new galvanising• Scratch and solvent resistant• Dried film contains more than 40% pure zinc• No primer required, can be sprayed directly onto bare metal• Designed to give an outstanding decorative finish – balance this with a high level
of corrosion protection and it creates an all round professional coating• Suitable for fences, trailers, marine, spouting and gates• Ideal for use in after weld touch ups, marine applications and
new galvanising touch-ups
Black Zinc• Quick drying, primer less top coat reinforced with zinc complexes• Scratch and solvent resistant• Unique resin system bonds strongly to most metals
Description Size Part Number
Zinc It 350g Aerosol 0446 1001Bright Zinc 350g Aerosol 0533 9231Black Zinc 300g Aerosol 0670 1373
PAIN
TS & M
ARKIN
GPAINTS, MARKING & SPRAY EQUIPMENT
30
30-04blackwoods.com.au
COLD GALVANISING• Cold galvanising is not galvanising – it’s simply the application of
a zinc-rich paint
• Galvanising, or hot-dip galvanising, involves dipping parts into molten zinc
• Both galvanised and cold galvanised materials can last for many years if protected by an additional paint layer
• When painting with cold galvanising paint, ensure complete surface coverage
• Even though galvanising inhibits corrosion of the underlying steel, rusting will be inevitable, especially if the local rainfall is at all acidic in nature, or the material is near a marine area
PRODUCT INSIGHT
Zinc Guard™
• High build, self priming top coat (priming required for non-ferrous metals)
• Advanced zinc anti-corrosive formula• Durable, long lasting finish• Toluene free, anti-chroming and UV resistant• Exceptional gloss levels• Suitable for use on all metal surfaces• Ideal for fences, roofs, gutters, doors, patios and light machinery
Colour Size Part Number
Gloss Black 325g Aerosol 0228 3737Gloss White 325g Aerosol 0228 3754Signal Red R13 325g Aerosol 0228 3771Deep Ocean (Colorbond®) 325g Aerosol 0228 3788Cottage Green (Colorbond®) 325g Aerosol 0228 3805Golden Yellow Y14 325g Aerosol 0228 3822Aluminium 325g Aerosol 0228 3839Machine Grey 325g Aerosol 0228 3856Flat Black 325g Aerosol 0228 3873Flat White 325g Aerosol 0228 3890
Rustpaint Epoxy Finish
®
• Single pack high gloss epoxy modified enamel especially formulated to protect and beautify both new and old steel surfaces
• Epoxy resin base ensures a tough, abrasion resistant finish and can be applied by brush, roller or spray
• Suitable for wrought iron, garden furniture, pipelines, fences, gates and steel sections
Colour Size Part Number
Black Flat 350g Aerosol 0652 4616Black Flat 1L 0419 7954Black Flat 4L 0072 2756Black Satin 350g Aerosol 0027 4788Black Satin 1L 0030 3671Black Satin 4L 0029 0547Black Gloss 350g Aerosol 0650 6919Black Gloss 1L 0419 7859Black Gloss 4L 0072 1558Pewter Grey N63 350g Aerosol 0070 8157Pewter Grey N63 1L 0419 8454Pewter Grey N63 4L 0072 2954Koala Grey N45 4L 0032 6978Ocean Blue 350g Aerosol 0879 1913Ocean Blue 1L 0419 8056Ocean Blue 4L 0072 3158Sky Blue 4L 0072 3352Brunswick Green G12 350g Aerosol 0027 4805Brunswick Green G12 1L 0029 0598
Colour Size Part Number
Brunswick Green G12 4L 0030 1597Emerald Green G13 350g Aerosol 0027 4822Emerald Green G13 1L 0030 1495Emerald Green G13 4L 0029 0853Rainforest Green G15 4L 0030 1631International Orange R11 350g Aerosol 0109 9460International Orange R11 1L 0419 8562International Orange R11 4L 0072 0861Bright Red R15 350g Aerosol 0650 6812Bright Red R15 1L 0419 8659Bright Red R15 4L 0072 2858Signal Red R13 350g Aerosol 0027 4958Signal Red R13 1L 0030 1563Signal Red R13 4L 0072 0759Indian Red R64 4L 0029 0887Silver 350g Aerosol 0650 7413Silver 1L 0419 8755Silver 4L 0071 1055White 350g Aerosol 0650 7112White 1L 0419 8863White 4L 0072 0956Golden Yellow Y14 350g Aerosol 0650 7316Golden Yellow Y14 1L 0419 8966Golden Yellow Y14 4L 0070 5558Ivory Y45 4L 0030 3688
Hammered Metal Finish
®
• Single pack gloss enamel which as it dries produces a dimpled, metallised coating
• Dry coating simulates the effect of sheet metal hammered with a ball pein hammer
• Protects and beautifies especially rough or damaged surfaces
• Can be brushed, rolled or sprayed• Suitable for industrial machinery, garden
furniture, wrought iron, arts and crafts, metal trim and restoration of old steel and metal structures
Colour Size Part Number
Gunmetal 350g Aerosol 0460 1966Gunmetal 4L 0386 9158Jade Green 350g Aerosol 0462 0855Jade Green 4L 0386 8366Macho Grey 350g Aerosol 0461 1861Macho Grey 4L 0386 8764Reef Blue 350g Aerosol 0463 9662Reef Blue 4L 0386 7155Silver 350g Aerosol 0461 1958Silver 4L 0386 9556
Hammered Metal Finish
• Hammered finish paint range• Durable paint for machine and
metal surfaces• Fast dry enamel• Suitable for all repair, fabrication
and maintenance work• Ideal for farming, mining,
transport and manufacturing
Colour Size Part Number
Green 250g Aerosol 0214 5459Grey 250g Aerosol 0214 5476Silver 250g Aerosol 0214 5493Blue 250g Aerosol 0214 5442
PAIN
TS &
MA
RKIN
GPAINTS, MARKING & SPRAY EQUIPMENT
30
30-05 Call 13 73 23
DuraGal® Silver Paints
®
• Anti corrosive silver protective paint and touch-up coating for welds and other iron and steel products giving the appearance of a new coated surface
• Suitable for DuraGal® steel welds and pre-primed steel sections
• DuraGal® is a trademark of Onesteel Ltd
Size Part Number
350g Aerosol 0485 98591L 0485 99574L 0486 006220L 0484 8965
COATING SURFACES• When coating a surface, ensure that it is clean, dry and sound
• It is recommended to try a small test piece or area to confi rm that the coating is the right one for the job. This will save time and money in the future
PRODUCT INSIGHT
Coatings – Rust Treatment
Rust Converter – Ironize Cs
250ml/1L/4L/500ml
®
• Fast-acting rust converter and sealer can be applied directly to a rusty surface
• Reacts with rust to form a stable compound that binds the surface, which is further protected by a tough flexible sealer
• Safe to use and can be recoated with a turpentine based enamel within 3 hours
• Suitable for rusted steel surfaces, ferrous components, gutters, roofs and concrete reinforcing bars
Size Part Number
250ml 0447 7600500ml 0447 78041L 0447 77074L 0447 7901
CLOTH DROP SHEET – PRO SERIES• Professional quality, reusable, fabric
drop cloths in heavy duty cotton
PART NUMBER 0038 5054
RELATED PRODUCT
SEE PAINTS, MARKING & SPRAY EQUIPMENT CHAPTER 30
Rust Treatment
Rust PrimeRust ConverterRust Converter
• Concentrated phosphoric acid based rust converter• Suitable for removing rust stains from porcelain, marble and terrazzo
Rust Prime
• Rust converter with added primer• Suitable to prime and seal metals for subsequent priming and top coating
Description Size Part Number
Rust Converter 5L 0070 0434Rust Converter 20L 0096 9017Rust Prime 4L 0529 7088
Rust Prevention
Rust Proof
Deodorised Fish Oil
Rust Proof
• Heavy duty corrosion preventative coating• Dries to a soft brown, waxy coating
that inhibits rust formation• Suitable for use in internal box sections, door
cavities, sills and pillars of motor vehicles
Deodorised Fish Oil
• Deodorised corrosion preventative • Penetrates through rust, gives the parent
metal protection from further rusting• Suitable for inhibiting rust formation in internal
box sections, door cavities, sills and pillars of motor vehicles, structural steel, railings, gates, bridges, pontoons and for protection of welds
• In accordance with AS 2262 – Part 1 – 1993 Corrosion Inhibition (Rust Proofing) – Motor Vehicles
Description Size Part Number
Rust Proof 350g Aerosol 0070 0366Rust Proof 20L 0070 1539Deodorised Fish Oil 350g Aerosol 0067 5393Deodorised Fish Oil 20L 0019 0842
MASTER PAINTER ROLLS• White aluminium oxide for a sharper
cutting action• Painted surface preparation• Heavy-weight paper for extra strength
and durability• Perforated every metre for easy
tear-off lengths• Suitable for maintenance applications
PART NUMBER 0000 0374
RELATED PRODUCT
SEE ABRASIVES CHAPTER 05
PAIN
TS & M
ARKIN
GPAINTS, MARKING & SPRAY EQUIPMENT
30
30-06blackwoods.com.au
Paint – Spraypaint
Spraypaint
®
• Fast-dry, high-gloss• Steel and structural enamel• Formulated to provide a tough coating
for the protection of metal surfaces• Suitable for use as a general purpose
industrial finishing coat
Colour Size Part Number
Black Satin 350g Aerosol 0341 1023Black Gloss 350g Aerosol 0084 0837Bright Red R15 350g Aerosol 0341 1040Brunswick Green G12 350g Aerosol 0341 1057Black Flat 350g Aerosol 0341 1108Clear Gloss 350g Aerosol 0061 5910Ocean Blue 350g Aerosol 0341 1159Golden Yellow Y14 350g Aerosol 0341 1091Natural Green 350g Aerosol 0341 1142PC Primrose 350g Aerosol 0341 1176Pewter Grey 350g Aerosol 0341 1193Signal Red 350g Aerosol 0341 1210Silver 350g Aerosol 0341 1227Sky Blue 350g Aerosol 0341 1244White 350g Aerosol 0341 1261
Spraypaint – General Purpose
• High gloss durable paint range• Includes solid and metallic colours• Fast drying• Suitable for all repair, fabrication and
maintenance work• Ideal for farming, mining, transport
and manufacturing
Colour Size Part Number
Chrome – Metallic 250g Aerosol 0488 1030Flash Blue – Metallic 250g Aerosol 0214 5306Gold – Metallic 250g Aerosol 0214 5323Silver – Metallic 250g Aerosol 0368 3006Gloss White 250g Aerosol 0368 3125Bright Red 250g Aerosol 0368 3091Emerald Green 250g Aerosol 0368 3108Gold Yellow 250g Aerosol 0368 3142Grey Primer 250g Aerosol 0214 5340Heritage Green 250g Aerosol 0214 5374International Orange 250g Aerosol 0368 3159Matt Black 250g Aerosol 0368 3074Mission Brown 250g Aerosol 0368 3176Satin Black 250g Aerosol 0214 5425Sky Blue 250g Aerosol 0214 5408Royal Blue 250g Aerosol 0368 3193
Available in other colours on request
ALUMINIUM TRESTLES• Rungs and stiles are fully welded• All aluminium construction• Internal spreaders• Large sole plates with stake holes• XHD construction (stiles and rungs)• Welded for extra strength• 120kg Industrial Duty Load Rating per trestle• Complies to AS/NZS 1892.1:1996
PART NUMBER 0790 3868
RELATED PRODUCT
SEE LADDERS & PLATFORMS CHAPTER 29
Paint – Fence Gutter Fascia
Fence Gutter Fascia Paint Aerosols
®
• Available in a range of Colorbond® colours• Flexible and extremely durable exterior acrylic• Tolerates extreme temperatures• Suitable for touching-up spot repairs on
metal surfaces
Colour Size Part Number
Classic Cream 350g Aerosol 0341 0904Cottage Green 350g Aerosol 0341 0700Deep Ocean 350g Aerosol 0341 0802Evening Haze 350g Aerosol 0798 3190Harvest 350g Aerosol 0341 0989Loft 350g Aerosol 0798 3207Manor Red 350g Aerosol 0341 0751Monument 350g Aerosol 0798 3224Night Sky 350g Aerosol 0341 0717Pale Eucalypt 350g Aerosol 0341 0785Paperbark 350g Aerosol 0341 0768Riversand 350g Aerosol 0341 0921Shale Grey 350g Aerosol 0341 0734Surf Mist 350g Aerosol 0341 0819Wilderness 350g Aerosol 0341 0870Woodland Grey 350g Aerosol 0341 0887
Fence Gutter Fascia Paint Aerosols
• For exterior use on metal surfaces• Fast dry satin finish acrylic• Convenient pocket size 150g can• Suitable for fencing and guttering,
sheds and water tanks• Ideal for repair of damaged Colorbond®
and powdercoat surfaces
Colour Size Part Number
Classic Cream 150g Aerosol 0214 5510Cottage Green/Evergreen 150g Aerosol 0214 5527Domain/Primrose 150g Aerosol 0214 5544Evening Haze/Summershade 150g Aerosol 0214 5561Manor Red/Red Oak 150g Aerosol 0214 5578Meadow/Pale Eucalypt 150g Aerosol 0214 5595Paperbark/Terrace 150g Aerosol 0214 5612Bushland/Tea Tree 150g Aerosol 0214 5629Woodland Grey/Grey Ridge 150g Aerosol 0214 5646Wilderness/Willow 150g Aerosol 0214 5663Surfmist 150g Aerosol 0215 1443
Available in other colours on request
TUFBAK PAPER SHEETS – WET & DRY – T417• Suitable for metal or acrylic
painted surfaces• Ideal for waterproof sanding
PART NUMBER 0043 1501
RELATED PRODUCT
SEE ABRASIVES CHAPTER 05
PAIN
TS &
MA
RKIN
GPAINTS, MARKING & SPRAY EQUIPMENT
30
30-07 Call 13 73 23
Paint – Line Marking
Line Marker Paints
• Dual purpose hand and machine use
• Machine attachment inside cap
• Toluene free formula• 500g Aerosol• Suitable for inverted
permanent marking on warehouse and factory floors, playgrounds and car parks
• Ideal for adhering to wood, concrete, bitumen, rock and grass (does not kill grass)
Colour Suits Part Number
Yellow Hazard/Caution 0103 8554Blue Handicap 0794 3614Red Danger/Prohibition 0083 6434White General 0103 8656Black General 0098 4494
Machine Line Marking Paints
• Fast drying acrylic paint• UV resistant• Specially formulated to provide long lasting lines• Toluene free formula• Designed for use with Dy-Mark Line Master• Suitable for line marking on car parks, factories,
warehouses, sporting fields and courts
Colour Size Part Number
Black 500g Aerosol 0302 8370Yellow 500g Aerosol 0055 1242White 500g Aerosol 0055 1225Blue 500g Aerosol 0118 2187Green 500g Aerosol 0118 2221Orange 500g Aerosol 0118 2238Red 500g Aerosol 0403 0792
Hand Held Line Marking Paints
• Specially designed nozzle• Fast drying acrylic paint• UV resistant• Suitable for hand held line and spot marking
Colour Size Part Number
White 500g Aerosol 0546 3059Yellow 500g Aerosol 0546 3025
LINE MARKING• Line marking paints can be used on a wide variety of substrates, both
natural and synthetic, indoors and outdoors, with some paints able to mark moist surfaces
• Line marking paints are available for the mining sector, for both open-cut and underground applications
• Specifi c line marking paints are dedicated to underground coal mines and other applications where the fi re potential is high
HANDY HINT
Easyline Line Marking Paints
• Formulated with a high concentration of pigment and resins to provide a high opacity, durable, semi-gloss finish
• Used in conjunction with a four wheel applicator for line marking in both interior and exterior applications
• Highly durable, traffic grade epoxy aerosol combined with a range of precision engineered, easy-to-use applicators
• Produces sharp bright lines every time – up to 110m line per can
• Suitable for car parks, schools, factories, warehouses, indoor and outdoor areas
Colour Size Part Number
Green 750ml Aerosol 0123 6254Black 750ml Aerosol 0123 6055Red 750ml Aerosol 0123 6555White 750ml Aerosol 0123 6657Blue 750ml Aerosol 0123 6152Yellow 750ml Aerosol 0123 6754Orange 750ml Aerosol 0123 6453
Turf Master Paint
• Temporary grass marking paint• Quick dry, toluene free formula• Low toxicity formula does not damage grass• Designed for use with the Dy-Mark Line Master• Suitable for use by hand (nozzle available separately)• Ideal for landscaping and sporting grounds
Colour Size Part Number
White 500g Aerosol 0063 4482
Bulk Line Marker Paints
• Durable solvent based, acrylic line marking paint• Fast drying, touch dry in 10 minutes, drive on in 30 minutes at 20°C• Spray, brush or roller application• Suitable for schools and sports clubs• Ideal for professional line markers
Colour Size Part Number
Blue 4L 0214 5051Blue 15L 0214 5068Black 4L 0214 5085Black 15L 0214 5102Red 4L 0214 5119Red 15L 0214 5136White 4L 0214 5187White 15L 0214 5204Yellow 4L 0214 5221Yellow 15L 0214 5238Thinner 4L 0214 5153Thinner 20L 0214 5170
PAIN
TS & M
ARKIN
GPAINTS, MARKING & SPRAY EQUIPMENT
30
30-08blackwoods.com.au
Bulk Line Marking Paint
White 20L
• Alkyd-chloro rubber road marking paint• High durability• Brush, spray or roller application
Colour Size Part Number
White 4L 0411 8325White 20L 0411 8291Yellow 4L 0132 2318Yellow 20L 0411 8308
Acrylic water-based formula available on request
Applicators – Line Marking
Marking Applicators
Steel Overhead Extension Arm
2 Wheel Survey Marker
4 Wheel Survey Marker
• Avoids bending – saves back strain• Strong, powder coated all steel construction• Suits Polypak, Ultracolor, White Knight, Dymark, Signet, Stripe, Spot, Ox,
Contractor and some other brands of line and spot marking paints and cans
Extension Arm• Fits Polypak and Ultracolor non-flammable vertical cans for marking
in hard-to-reach areas• Provides extra reach and reduces the chance of operator strain-related injuries• Suitable for freehand line marking, spotting and general marking
2 Wheel Survey Marker• Designed to roll over surface to be marked, avoiding fatigue• Suitable for marking temporary lines on rough surfaces
4 Wheel Survey Marker• Adjustable line width from 25 – 100mm• Standard spray head mounts either centrally or to either side, allowing
lines to be marked up close to walls• Suitable for marking smooth straight lines
Applicator Type Part Number
Steel overhead extension arm 0106 86272 Wheel survey marker 0106 84234 Wheel survey marker 0106 8593
SUN PROTECTSunscreen• SPF50+ Sunscreen provides 50 times the skin’s normal
protection against the sun’s harmful UVA and UVB rays• Four hours water resistant to withstand heavy
perspiration or immersion in waterSunscreen Dispenser• Suits 1L cartridges• Wall mountable• Lifetime guarantee
PART NUMBER 0996 7430 (1L Cartridge) 0996 7447 (Dispenser)
RELATED PRODUCT
SEE SAFETY – PERSONAL PROTECTIVE EQUIPMENT CHAPTER 07
Line Marking Applicator
• Ergonomic design• Built-in side line attachment for marking
lines close to walls and machinery• Heavy duty steel construction• Adjustable line width• Lightweight, removable handle for spot marking• Includes utility tray and storage for five cans
of Dy-Mark’s line marking paint• Suitable for warehouses, factories,
sports grounds, schools and car parks
Applicator Type Part Number
4 Wheel line marker 0546 2906
Easyline® Line Marking Applicators
Hand Held Line Marker
4 Wheel Line Marker
Hand Held Line Marker• Suitable for use with Rocol® Easyline® paint when spraying numbers or stencils
4 Wheel Line Marker• Used with Rocol® Easyline® paint• Quick shift device allows the user to select line widths of 50 or 75mm
in a single operation
Applicator Type Part Number
Hand held line marker 0123 59534 Wheel line marker 0123 8752
PLASMA• Full frame design with thermoplastic
rubber temple arm tips and nose pads for all day comfort and grip
• Smoke Grey and Smoke Polarised lens – hard coat fi nish on both sides of the lens for high level scratch resistance
• Smoke Grey lens – ideal for outdoor environments where a high level of sun glare is present
• Bronze lens – ideal for outdoor environments where a medium level of sun glare is present
• Smoke Polarised lens – ideal for outdoor environments where a high level of sun glare is present; also reduces glare at certain angles from shiny surfaces such as wet surfaces
• Suitable for a wide range of industries• Certifi ed to AS/NZS 1337.1:2010 – Medium impact protection
PART NUMBER 0211 6338
RELATED PRODUCT
SEE SAFETY – PERSONAL PROTECTIVE EQUIPMENT CHAPTER 07
Smoke Polarised
PAIN
TS &
MA
RKIN
GPAINTS, MARKING & SPRAY EQUIPMENT
30
30-09 Call 13 73 23
Paint – Survey Marking & Accessories
Survey Markers
• Fast dry formula• General purpose layout marker• Toluene free formula• Inverted use only• Suitable for marking concrete, bitumen, gravel and grass• Ideal for site layout, surveying and spot marking
Colour Size Part Number
Black 350g Aerosol 0061 5859Blue 350g Aerosol 0245 9261Fluorescent Green 350g Aerosol 0471 4367Yellow 350g Aerosol 0471 6064White 350g Aerosol 0471 5967Fluorescent Pink 350g Aerosol 0471 5757Fluorescent Orange 350g Aerosol 0471 4462Red 350g Aerosol 0245 9363
Spray & Mark (Marking Out Paints)
• Designed for inverted use• Fast dry formula• Suitable for use in construction,
landscaping, civil works and surveying• Ideal for use with the long arm handle
and 2 wheel spot marking handle
Colour Size Part Number
Blue 350g Aerosol 0471 3956Black 350g Aerosol 0546 3076Orange 350g Aerosol 0326 9940Red 350g Aerosol 0471 4053Violet 350g Aerosol 0200 4767White 350g Aerosol 0471 4155Yellow 350g Aerosol 0055 1208Green 350g Aerosol 0246 6894Fluorescent Orange 350g Aerosol 0080 8146Fluorescent Pink 350g Aerosol 0471 4558Fluorescent Red 350g Aerosol 0070 1267Fluorescent Yellow 350g Aerosol 0471 4655Fluorescent Blue 350g Aerosol 0048 4245Fluorescent Green 350g Aerosol 0132 5701
MINERAL TURPENTINE• Low aromatic, white spirit hydrocarbon• Colourless mobile liquid with a petroleum/
solvent odour• Suitable for thinning oil based paints and
cleaning equipment
PART NUMBER 0327 2819 (20L)
RELATED PRODUCT
SEE HYGIENE, JANITORIAL & CLEANING CHAPTER 11
Survey Marking Applicators
Long Arm Handle 2 Wheel Spot Handle
• Prevents back muscle strain
• Provides extra reach• Made of lightweight
aluminium• Suitable for use with Dy-Mark Spray and Mark paints
Applicator Type Part Number
Long arm handle 0411 82742 Wheel spot handle 0546 2940
Survey Pegs
Length mm Size mm Type Part Number
150 25 x 25 White 0232 2190200 50 x 50 Red 0078 9242230 38 x 38 White 0232 2207230 50 x 50 White 0232 2173300 25 x 25 White Top 0385 5029350 50 x 50 Red 0078 9361450 50 x 25 White 0232 2224600 50 x 50 Capped 0138 7241900 25 x 25 White 0008 9908900 50 x 25 White 0232 21391200 25 x 25 White Top 0385 4859
Surveyor/Flagging Tapes
• Plastic flagging tape• Superior visibility with intense colours permitting
easy sighting even at great distances• Improved stretchability• Suitable for building sites, hazardous locations, surveyors and site preparation
Colour Length m Width mm Std Pack Part Number
Glo-Lime 100 25 12 0407 4873Glo-Orange 100 25 12 0407 4890Glo-Pink 100 25 12 0402 7987Red 100 25 12 0407 4907Blue 100 25 12 0144 1692White 100 25 12 0144 1607Yellow 100 25 12 0144 1590
PDNS0010 TWO TONE HIGH VISIBILITY REFLECTIVE TAPE POLO SHIRT – SHORT SLEEVE• 160gsm Breathable polyester micromesh • Australian Standards compliant retro-refl ective
tape for enhanced night time visibility• Pocket with pen partition• Style Code: PDNS0010• Orange/Navy• Complies with AS/NZS 4399 – UPF 40
Excellent protection• Complies with AS/NZS 4602.1:2011 and AS/NZS 1906.4:2010 – Class
D/N Day or Night Use
PART NUMBER 0979 3129
RELATED PRODUCT
SEE CLOTHING CHAPTER 09
PAIN
TS & M
ARKIN
GPAINTS, MARKING & SPRAY EQUIPMENT
30
30-10blackwoods.com.au
Paint – Mine Marking
Mine Marking Paint
• Produces bright and highly visible marks on dark surfaces
• Easy application• 360° Action for vertical and horizontal use;
either by hand or with the mine marking handle• Suitable for underground and open cut mines
(not to be used for underground coal mines)• Ideal for marking out ore zones in grading control,
pit walls and survey grid layouts
Colour Size Vertical Horizontal
Blue 350g Aerosol 0340 2931 0360 7560Black 350g Aerosol 0069 3523 0360 7509Red 350g Aerosol 0362 2741 0547 7390White 350g Aerosol 0340 2965 0405 0410Yellow 350g Aerosol 0340 2948 0388 5476Fluorescent Pink 350g Aerosol 0530 0828 0530 0794Fluorescent Orange 350g Aerosol 0784 1631 0360 7594Fluorescent Red 350g Aerosol 0530 0811 0530 0777
Mine Marking Non-Flammable Paints
• Non-flammable layout marker• Bright and highly visible marks
on dark surfaces• Easy application• 360° Action for vertical and horizontal use• Suitable for use by hand or with mine
marking handle• Ideal for underground coal mines
and other fire sensitive situations
Colour Size Vertical Horizontal
Red 400g Aerosol 0411 8393 0031 4211White 400g Aerosol 0132 2216 0045 2727Yellow 400g Aerosol 0411 8376 0057 4566Fluorescent Orange 400g Aerosol 0411 8342 0530 0692Fluorescent Pink 400g Aerosol 0028 2336 0031 4092Fluorescent Red 400g Aerosol 0546 3110 0530 0675
Non-Flammable Marking Paint
• Cans available for either vertical or horizontal spray application
• Fast drying and easy to use
• Bright colours for high visibility
• Suitable for use in underground mines
• Ideal for high risk fire areas, including coal mines
Colour Size Vertical Horizontal
White 400g Aerosol 0117 7597 0031 2358Fluorescent Orange 400g Aerosol 0028 2047 0464 9805Fluorescent Pink 400g Aerosol 0214 5255 0462 4766Fluorescent Red 400g Aerosol 0087 0689 0065 8665Fluorescent Yellow 400g Aerosol 0214 5272 0464 9864
Applicators – Mine Marking
Mine Marking Handle
• Designed for use with mine marking and mine marking / non-flammable paints
• Three part handle extends up to 5m• Reduces repetitive back strain• Not to be used in underground coal mines• Suitable for marking mine ceilings
Type Length m Part Number
Aluminium 3 – 5 0530 1117
Paint & Coatings – Waterproofing
Bitumen Paint
• Primes, protects and waterproofs • Solvent based, bituminous paint and primer• Waterproof, acid and alkali resistant• Will not contaminate drinking water when dry• Approximately 10m²/L coverage on metal and 8m²/L coverage on concrete
Size Part Number
4L 0458 521720L 0458 5013
Brushable Hydroseal
• Waterproofing sealant • Black, bituminous, rust inhibiting
sealing compound• Formulated for application to
dry or damp surfaces• Will not contaminate drinking water when dry• Provides approximately 1.5m2/L coverage• Suitable for sticking down new bituminous roofing rolls
Size Part Number
1L 0433 71064L 0433 730020L 0418 9011
KNEE PADS – KNEEON• Extra heavy duty, slip resistant, single
strap, non-marking, lightweight with upper shin protection
• Designed for the knee pad wearer who spends long periods of time kneeling
• Provides maximum protection and comfort with a pad that is almost 2cm thick at the deepest point
• Pad bends back towards the knee when kneeling, reducing the gap between pad and knee, minimising potential of waste materials falling into the gap other knee pads leave
• Pad surface has cross hatching giving good grip and reduced slipping• Single lower strap reduces pressure above the knee• Extra padding on the inside between the pad and strap, which has longer
hook and loop adjustment for larger wearers
PART NUMBER 0231 8382
RELATED PRODUCT
SEE CLOTHING CHAPTER 09
PAIN
TS &
MA
RKIN
GPAINTS, MARKING & SPRAY EQUIPMENT
30
30-11 Call 13 73 23
Trowelable Hydroseal (Black Jack)
• Thick, waterproof, bituminous sealing compound• Easy to spread and adheres to all clean,
dry surfaces• Alkali and acid resistant, when dry it will not
contaminate drinking water• Thick skin forms quickly, yet the material dries
slowly with less than 20% shrinkage• Withstands slumping temperatures up to 70°C• 1.1L fills a joint approximately
25mm x 5mm x 8m long
Size Part Number
4L 0410 4504
Inks & Dyes (Stains)
Flaw Chek (Flaw & Crack Finder)
• Four step flaw and crack detection system
• Non-destructive testing method• Detects fine to large flaws• Suitable for all metallic surfaces• Complies with AS 2062:1997 –
Type 2 Method C
Type Size Part Number
No. 1 Pre-cleaner 350g Aerosol 0403 7406No. 2 Penetrant 350g Aerosol 0403 7503No. 3 Remover 350g Aerosol 0403 7600No. 4 Developer 350g Aerosol 0403 7707Kit (4 cans) 350g Aerosol x 4 0401 2738
Flawfinder Crack Detection
• Three part method of flaw and crack detection for welded joints and engineering components during maintenance or manufacturing
• Non destructive testing required• Suitable for cast and welded metal
components, glass and ceramic components and under normal light conditions
Description Size Part Number
Flawfinder™ Cleaner Spray 300g Aerosol 0027 4205Flawfinder™ Developer Spray 300g Aerosol 0027 4302Flawfinder™ VW Penetrant Spray 250g Aerosol 0027 4409Flawfinder™ Kit (three-part) 2 x 300g & 1 x 250g Aerosols 0097 7405
Layout Dyes (Stains)
• Marks on all hard surfaces• Good adhesion to metal and glass• Suitable for engineering and metal
fabrication industries
Colour Size Part Number
Black 1L 0530 0709Blue 1L 0027 9242Red 1L 0530 0743Green 1L 0530 0726
WB800 Timber Stress-Grading Inks
• Used for coding stress-graded timber• Lightfast• Suitable for use with automatic stress-grading
machines and green chain branders
Colour Size Part Number
Black 10L 0630 4950Green 10L 0721 5436Red 10L 0707 7362Violet 10L 0707 7379
R600 Timber Branding Ink
• Dye-based ink designed for use with timber branders• Lightfast and durable• Suitable for marking porous surfaces such as
timber and cardboard
Colour Size Part Number
Black 1L 0027 9310
Magnetic Ink• High sensitivity black magnetic ink • Black iron oxide suspended in fine, low aromatic petroleum distillate• Suitable for revealing surface and near surface defects in
ferro-magnetic materials, mild and low alloy steels
Model Colour Size Part Number
800/3 Black 300g Aerosol 0033 8538
Background Lacquer
• Suspension of white pigment in a resin base• Contains a fast drying solvent for quick application• Provides a contrasting white background when dark
steels are being tested for cracks• Suitable for the detection of fine defects when applied
with Adrox 800/3• Not for use on plastic or rubber• Dangerous Goods Class 3 – Flammable liquids
Model Colour Size Part Number
8901W White 300g Aerosol 0035 15268901W White 5L 0589 8939
GOGGLES• One piece moulded lens and frame with integrated
facial seal for excellent comfort and seal• Splash resistant design with drain channel
to direct fl uid splashed away from vents• Vented to reduce heat and perspiration vapour• Clear and Smoke Grey lens – anti-fog/anti-scratch
coating on both sides of the lens• Smoke Grey lens – ideal for outdoor environments where a high level of
sun glare is present• Suitable for a wide range of industries including where protection from
low hazard splash is required• Certifi ed to AS/NZS1337.1:2010 – Medium impact protection and splash
resistance requirements
PART NUMBER 0988 4742
RELATED PRODUCT
SEE SAFETY – PERSONAL PROTECTIVE EQUIPMENT CHAPTER 07
Clear
PAIN
TS & M
ARKIN
GPAINTS, MARKING & SPRAY EQUIPMENT
30
30-12blackwoods.com.au
Temperature Markers
Thermomelt® Sticks
• Surface temperature marker• Accurate to within ±1%
stated temperature• Fast, economical method• Stainless steel holder with pocket clip• Suitable for all industries where knowledge of treatment temperature is essential
Temperature °C Temperature °F Part Number
38 100 0436 060743 109 0530 086245 113 0530 087952 125 0436 070466 150 0436 080173 163 0436 090879 175 0436 100483 182 0436 110187 188 0446 480490 194 0436 130593 200 0436 1402101 213 0530 0930107 225 0436 1509114 238 0436 1606121 250 0436 1703124 256 0070 3698128 263 0436 1907132 269 0436 2003135 275 0436 2100139 282 0436 2207142 288 0436 2304146 294 0436 2401149 300 0436 2508152 306 0530 0964156 313 0530 0981159 319 0436 2605164 325 0436 2702166 331 0436 2809170 338 0436 2906177 350 0436 3109184 363 0436 3206198 388 0436 3400204 400 0436 3507212 413 0530 0998218 425 0436 3604232 450 0436 3808246 475 0436 4001253 488 0436 4108260 500 0436 4205288 550 0436 4409302 575 0436 4506343 650 0436 4807371 700 0436 4904399 750 0436 5000427 800 0436 5107510 950 0436 5505538 1000 0436 5602550 1022 0436 5709565 1050 0436 5806593 1100 0436 5903621 1150 0436 6009649 1200 0436 6106677 1250 0436 6203704 1300 0436 6300843 1550 0436 70081038 1900 0436 7600
WELDER’S LEATHER APRONS – BIB STYLE• Full bib with webbing straps
PART NUMBER 0395 3507
RELATED PRODUCT
SEE CLOTHING CHAPTER 09
Paintstik Marker – Markal
• Real paint in stick form • Permanent, weatherproof and fade proof• Suitable for marking at various temperatures
B Marking Range: -46°C to +66°C• Lead-free and non-toxic• Suitable for use on all materials• Ideal for layout, colour coding, fabrication and identification
BL Marking Range: -46°C to +66°C• Marks bleed through solvent and oil based primers and paints• UV and durable weather resistant• Sealing marked areas with water-based epoxy paint prevents
bleed through on finished coat• Suitable for construction, bridge fabrication and ship building or repair• Ideal for use on steel, iron and structural steel
P Marking Range: -46°C to +66°C• Non-drying• Marks are completely removed in pickling bath and will
not interfere with the galvanising process• Suitable for marking steel prior to galvanising process
M Marking Range: 0°C to 871°C• Marks withstand annealing and heat treating operations• Marks will not come off in oil or water baths
H Marking Range: 107°C to 593°C• Marks will not run, char, discolour, crack or peel• Suitable for use on coils, billets, slabs, bars and ingots
HT Marking Range: 204°C to 871°C• Marks are weather and fade resistant• Suitable for use on coils, billets, slabs, bars and ingots
K Marking Range: 982°C to 1204°C• Marks on extremely hot steel• Marks will not run, char, discolour, peel or crack• Suitable for use on iron and steel castings, ingots, forgings,
blooms, billets and high temperature metal alloys
Type Colour Std Pack Part Number
B Black 12 0404 0202B Blue 12 0404 0503B Brown 12 0404 1007B Green 12 0404 0600B Grey 12 0404 1104B Orange 12 0404 0707B Pink 12 0404 0901B Purple 12 0404 0804B Red 12 0404 0406B White 12 0404 0105B Yellow 12 0404 0309BL Blue 12 0404 1405P White 12 0055 4285M Red 12 0077 1222H Black 144 0028 6059H Green 144 0028 6076H Red 144 0028 6042HT Blue 144 0246 6911HT Red 144 0071 3813HT White 144 0062 0942HT Yellow 144 0025 1923K White 12 0030 4640
KEVLAR HEAT PROTECTION GLOVES AND MITTS• High tensile strength• Working temperature of up to 350°C• High resistance to cuts and abrasions• Fully wool lined
PART NUMBER 0493 4155
RELATED PRODUCT
SEE SAFETY – PERSONAL PROTECTIVE EQUIPMENT CHAPTER 07
PAIN
TS &
MA
RKIN
GPAINTS, MARKING & SPRAY EQUIPMENT
30
30-13 Call 13 73 23
Paint – Graffiti Management
Graffiti Cover-Up Paint
• High flow valve for fast application• High opacity for painting over graffiti• Common utility and fence colours• Jumbo can – covers large areas• Suitable for councils and utilities
Colour Size Part Number
Electricity Utility Box Green 500g Aerosol 0214 5680Galvanised Light Post Silver 500g Aerosol 0214 5697Mission Brown 500g Aerosol 0214 5714Colorbond® – Primrose 500g Aerosol 0214 5731
Available in other colours on request
Graffiti Remover
• Removes graffiti• Spray on and wipe or scrape off• Convenient and economical• Suitable for councils and utilities
Description Size Part Number
Graffiti and paint remover 250g Aerosol 0214 5357
Paint – Fluoro, Writing & Marking
Spray Writer (Forestry & Plantation Marker)
• Reduced toxicity marking paint• Marks wet surfaces without cracking and peeling• Unique formulation reduces spray drift• Suitable for marking masonry and concrete• Ideal for all natural and cut timber applications,
forestry and timber processing industries
Colour Size Part Number
Red 350g Aerosol 0065 8495Green 350g Aerosol 0411 8427Yellow 350g Aerosol 0405 0342White 350g Aerosol 0065 8512Orange 350g Aerosol 0405 0359Blue 350g Aerosol 0331 3868Black 350g Aerosol 0411 8410Violet 350g Aerosol 0411 8444Fluorescent Orange 350g Aerosol 0534 4943Fluorescent Pink 350g Aerosol 0030 4317Fluorescent Red 350g Aerosol 0411 8461Fluorescent Yellow 350g Aerosol 0534 4926Fluorescent Blue 350g Aerosol 0534 4909Fluorescent Green 350g Aerosol 0030 4351
Pak-Writer
• Toluene free formula• Bright, high visibility colours• Suitable for 360°
all-directional spray marking, pack marking and identification
• Ideal for open cut mining, construction, forestry, logging and demolition
Colour Size Part Number
White 350g Aerosol 0336 4936Blue 350g Aerosol 0624 8323Yellow 350g Aerosol 0072 4754Fluorescent Orange 350g Aerosol 0072 4652Fluorescent Pink 350g Aerosol 0074 6803
Sprays & Rollers – Stencil
Spray Lacquer Colour Coding Paint
• High quality paint • Lightfast and durable• Standard colours can be removed in a pickling bath• Colours matched to Australian steel industry standards• Suitable for stencils and colour coding
Colour Size Part Number
Black 350g Aerosol 0066 0314Yellow 350g Aerosol 0142 2397Fluorescent Pink 350g Aerosol 0597 2668
Spray Ink (Stencil Sprays)
• Specially formulated for stencil applications• Unique formulation minimises build-up when used on stencils• Good adhesion to most surfaces• Fast drying and lightfast• Suitable for general colour coding
Colour Size Part Number
Blue 315g Aerosol 0546 3178Black 315g Aerosol 0546 3127Brown 315g Aerosol 0546 3229Green 315g Aerosol 0546 3195Red 315g Aerosol 0546 3144Orange 315g Aerosol 0042 8655White 315g Aerosol 0546 3246Yellow 315g Aerosol 0401 8688
Stencil Mate Rollers
• Stencil ink applicator suitable for all industries
• Economical and clean• Brush or foam roller application• Disposable ink cartridges
Type Colour Size mm Std Pack Part Number
Ink cartridges Red – 6 0530 0471Ink cartridges Green – 6 0530 0488Ink cartridges Blue – 6 0530 0505Ink cartridges Black – 6 0530 0522Replacement roller – 75 1 0488 9853Roller head assembly – 75 1 0530 0267
PAIN
TS & M
ARKIN
GPAINTS, MARKING & SPRAY EQUIPMENT
30
30-14blackwoods.com.au
Stencil Sets – Brass Interlocking
• Heavy duty reusable stencils• Simply select letters and interlock together• Convenient way to customise messages• Easy to clean
Letter Height mm Style Part Number
25 A – Z 0530 055650 A – Z 0530 057375 A – Z 0530 0590100 A – Z 0530 060725 0 – 9 0530 062450 0 – 9 0040 247575 0 – 9 0530 0641100 0 – 9 0530 0658
Stencil Sets – Zinc
• Solvent resistant• Durable, rust resistant zinc materials• Long service life• Suitable for all stencilling needs
Letter Height mm Style Part Number
12 A – Z 0427 690819 A – Z 0427 700425 A – Z 0404 740938 A – Z 0404 750650 A – Z 0404 760364 A – Z 0427 710175 A – Z 0446 5405100 A – Z 0427 7305125 A – Z 0446 5308150 A – Z 0427 7208175 A – Z 0530 997412 0 – 9 0427 740225 0 – 9 0404 710838 0 – 9 0404 720550 0 – 9 0404 730264 0 – 9 0427 760675 0 – 9 0446 5502100 0 – 9 0427 7800125 0 – 9 0446 4406150 0 – 9 0427 7703175 0 – 9 0411 8495
Stencils – Oilboard
• Manufactured from long fibre wood chip that cuts very crisply without tearing board
• Oil treatment adds life to the cut stencil• Suitable for all brands of stencil machines and for low volume use stencils
Size mm Size inch Part Number
610 x 178 24 x 7 0299 1293
Stencil Spray
• Cardboard coloured spray• Fast drying and easy to use, covers unwanted text• Formulated to not react with old felt pen or printing ink• Allows cartons to be reused with new addresses saving money
and waste• Ideal for transport and warehousing industries
Colour Size Part Number
Carton cover 350g Aerosol 0214 5289
Kits – Paint Roller
Paint Roller Kits
General Purpose
Narrow Long Arm
Narrow
General Purpose Paint Roller Kit• 5.7mm diameter steel frame plus five wire
steel cage• Threaded handle for use with Ebony
extension pole• Includes: plastic tray and paint stirrer• Suitable for walls, ceilings, general maintenance
and fit-outs
Narrow Paint Roller Kit• 5.0mm diameter steel frame• Includes: narrow plastic tray and paint stirrer• Suitable for general plant maintenance and
equipment coating
Narrow Long Arm Paint Roller Kit• Long arm roller frame for difficult to
access environments• Quality fabric• Suitable for use on a wide variety of paints
and industrial coatings
Description Size mm Part Number
General purpose paint roller kit with tray 230 0231 0121General purpose paint roller kit with tray 270 0231 0104Narrow paint roller kit 50 0231 0138Narrow long arm paint roller kit 110 0231 0189
Tray colour may vary
Paint Roller Kits
682 683
• Frame, cover and tray together
• Suitable for water based painting
Mfr No. Description Size mm Part Number
682 Handyman kit with cover, frame & plastic tray 230 0648 4811
683Premium kit with cover for most paints, heavy duty frame & plastic tray
270 0439 7658
PAINTING WITH ROLLERS• Before painting, prepare the surface carefully by smooth sanding and
thorough cleaning. Prepare the roller by washing it in warm soapy water to remove any loose fi bres, making sure to thoroughly rinse and dry it.
• Half fi ll the tray with paint and dip the roller in it. Lift the roller out and roll it down the sloped grating two or three times, making sure that you don’t go back into the paint. Dip the roller into the paint again and roll it on the grating until the roller has an even coat of paint on it. Ensure that the roller is not overloaded with paint, as it will slide and drip, leaving an uneven coat.
• Begin painting by using diagonal strokes, making sure that the roller doesn’t dry out. Finish off each application with slightly overlapping vertical strokes.
HANDY HINT
PAINTS, MARKING & SPRAY EQUIPMENT
30
30-15 Call 13 73 23
BRUS
HES
, SPR
AYER
S &
EQ
UIPM
ENT
Baby Foam Rollers and Kits
582
583
• Suitable for full and semi-gloss enamels on small, smooth surfaces
Mfr No. Description Size mm Part Number
582 Roller complete with frame 50 0360 8713583 Roller cover (pack of 2) 50 0360 9013623 Roller complete with frame 75 0055 9205624 Roller cover (pack of 2) 75 0360 9110
Nook & Cranny Rollers
686 686R 686F
686M
• Long handled frame ideal for hard to reach places• Handle threaded for use with extension pole• 100mm rollers are great for trim work around
window and door frames• Roller covers available in fabric, foam and mohair• Suitable for gloss paints• Ideal for smooth and semi-smooth surfaces in
wet areas, kitchens, bathrooms and laundries
Mfr No. Description Size mm Part Number
686 Long handled frame & fabric roller cover 100 0039 5654686R Replacement fabric cover (pack of 2) 100 0042 2552686F Replacement foam cover (pack of 2) 100 0087 5772686M Replacement mohair cover (pack of 2) 100 0221 1572676M Replacement mohair cover (packet of 10) 100 0051 9545676R Replacement fabric cover (packet of 10) 100 0862 4413676F Replacement foam cover (packet of 10) 100 0221 1555
HIGH PERFORMANCE GREEN MASKING TAPE 401+/233+• Excellent conformability to irregular surfaces • Resists paint bleed-through • Great paint lines • Colour: green • Resistant up to 121°C• Suitable for industrial paint masking, bundling,
holding, marking, colour coding and sealing
PART NUMBER 0227 5254
RELATED PRODUCT
SEE TAPES & PACKAGING CHAPTER 06
Trays & Containers – Paint Roller
Paint Roller Trays
670
673
• 673 is designed to be hung over steps or rungs of a ladder, saving time and effort
• Suitable for all paint jobs
Mfr No. Description Size mm Part Number
670 Polypropylene black handyman 270 0052 5351673 Polypropylene heavy duty hooded 270 0069 7158
Pro Series Paint Bucket
• Roller ramp allows more paint to be carried• Premium quality seamless construction with
solid grid and carrying handles• Suitable for all paint jobs
Mfr No. Description Size mm Part Number
678345 Heavy duty steel bucket – small 345 x 300 0221 1640
Paint Buckets
• Roller ramp allows more paint to be carried
• Made with heavy duty plastic and carrying handles
• Suitable for all paint jobs
Mfr No. Description Size mm Part Number
674P Painters bucket with lid 250 0221 1589677P Painters bucket with lid 330 0221 1606678P Painters bucket with lid 440 0221 1623
Frames – Paint Roller
Quikway Regular Roller Frame
• Handle threaded for use with extension pole
• Five wire cage
Mfr No. Size mm Part Number
726 230 0003 0974
PAINTS, MARKING & SPRAY EQUIPMENT
30
30-16blackwoods.com.au
BRUSHES, SPRAYERS &
EQUIPM
ENT
Classic Heavy Duty Roller Frames
• Fits any cover with end cap• Solvent resistant handle threaded for use with extension pole• Bronze finish frame with five wire steel cage
Mfr No. Size mm Part Number
650 75 0048 1807651 130 0360 9411727 270 0068 8211
Pro Series Adjustable 'U' Frame
• Adjustable aluminium frame• Lightweight, rustproof and extremely durable • End caps allow for easy fitting of roller covers• Threaded end for use with extension poles
Mfr No. Size mm Part Number
662 270 – 460 0039 4854
Pro Series Premium Quality Roller Frame
• Heavy duty professional quality with stainless steel cage and chrome plated frame
• End caps and handle made from solvent resistant polypropylene and internally threaded for use with extension pole
• Reinforced metal band in handle prevents splitting• Frame is completely rustproof
Mfr No. Size mm Part Number
657 270 0087 6265
Available in 230mm version on request
Extension Handles – Roller Frames
Extension Pole
• Telescopic aluminium handle with locking screw• Suitable for use with Ebony rollers kits and most leading brands• Ideal for paint rolling of walls. ceilings, floors, general maintenance and fit-outs
Description Size m Part Number
Aluminium extension pole 3.6 0231 0087
Aluminium Telescopic Extension Handles
• Pro Series aluminium telescopic handle with locking button• Alloy construction• Suitable for use in all situations where a telescopic pole is needed
Mfr No. Size m Part Number
764 1.2 – 2.4 0979 7013766 1.8 – 3.6 0039 8156
Wooden Extension Handle
• Disposable timber extension poles threaded for use with Oldfields roller frame
Mfr No. Size m Part Number
661 1.8 0311 2258
Covers – Paint Roller
Roller Covers
110mm & 270mm• Quality fabric • Suitable for use with Ebony and leading brand roller frames• Ideal for use on a wide variety of paints and industrial coatings
230mm• Polyester fabric• Suitable for use with Ebony and leading brand roller frames• Ideal for general use with water based paints
Description Size mm Part Number
Fabric roller cover – narrow long arm 110 0231 0206Polyester roller cover 230 0231 0172Fabric roller cover 270 0231 0155
Classic Trade & Handyman Roller Covers
All Paints
Gloss Paints
Long Nap
Economy Polyester
All Paints• Regular woven polyester nap • Suitable for all oil based or
water-based paints on smooth and semi-smooth surfaces
Gloss Paints• Short woven polyester nap• Suitable for all oil based or
water-based gloss and semi-gloss paints on smooth surfaces
Long Nap• Long knitted polyester nap• Suitable for all flat, low sheen and
gloss water-based paints on semi-rough and rough surfaces
Economy Polyester• Fits standard cage frame• Polyester fabric• Suitable for use with most paints• Ideal for industrial use and
water-based paints
Mfr No. Style Pile mm Size mm Part Number
700 All Paints 10 180 0087 5755701 All Paints 10 230 0042 8859698 All Paints 10 270 0028 4104704 Gloss Paints 6 180 0068 8296705 Gloss Paints 6 230 0087 5738705-270 Gloss Paints 6 270 0083 5754731 Long Nap 20 230 0068 8262737 Long Nap 20 270 0068 8245641 Economy Polyester 11 230 0978 2759
CHALK LINE REEL• Rewinds 3½ times faster than regular chalk lines• Cases are chrome plated, high impact plastic for durability• Locking handle allows tool to be used as a plumb bob• Includes: fast, easy pushbutton line release, large chalk
capacity and easy pop-in line refi ll• Suitable for construction
PART NUMBER 0522 4063
RELATED PRODUCT
SEE TOOLS – HAND, MEASURING & PRECISION CHAPTER 23
PAINTS, MARKING & SPRAY EQUIPMENT
30
30-17 Call 13 73 23
Foam Roller Covers
• Urethane foam cover for use on smooth or semi-smooth surfaces with full and semi-gloss enamels
• Suitable for use with cement based materials to achieve a smooth finished surface
Mfr No. Size mm Pile mm Part Number
631 75 10 0039 3054636 230 10 0069 6557622 270 10 0069 6762
Corrugated Foam Roller Cover
• Fits 230mm standard roller cage frames• Suitable for 75mm corrugated roof and wall sheeting• Ideal for use with full and semi-gloss enamels and
roofing paints
Mfr No. Size mm Part Number
688 230 0039 7254
Pro Series Texture Roller Covers
• Designed to mask rough or poor surfaces with texture coatings
• Fine texture
Mfr No. Size mm Part Number
733 230 0039 4257734 270 0039 4456
Pro Series Premium Quality Roller Covers
Blue Regular Nap
Green Any Paints
Red Oil Paints
• Premium trade quality range of roller covers
Blue Regular Nap• Regular woven polyester nap• Suitable for all flat and low sheen water-
based paints on smooth and semi-smooth surfaces
Blue Long Nap• Long knitted polyester nap• Suitable for all flat, lowsheen and gloss
water-based paints on semi-rough and rough surfaces
Green Any Paints• Regular universal fabric nap • Suitable for any oil based or water-based paints on smooth and semi-smooth
surfaces
Red Oil Paints• Mohair blend fabric• Suitable for use with gloss paints on smooth surfaces
Mfr No. Style Pile mm Size mm Part Number
611 Blue Regular Nap (polyester) 11 230 0446 7607612 Blue Regular Nap (polyester) 11 270 0445 4607613 Blue Regular Nap (polyester) 11 360 0038 8953614 Blue Regular Nap (polyester) 11 460 0038 9754619 Blue Long Nap (polyester) 22 270 0069 7556606 Green Any Paints (universal fabric) 10 75 0446 8800607 Green Any Paints (universal fabric) 10 130 0038 5855600 Green Any Paints (universal fabric) 10 180 0038 6655601 Green Any Paints (universal fabric) 10 230 0038 7455602 Green Any Paints (universal fabric) 10 270 0038 7954603 Green Any Paints (universal fabric) 10 360 0038 8255602-18 Green Any Paints (universal fabric) 10 460 0038 8556629 Red Oil Paints (mohair) 6 75 0039 3452645 Red Oil Paints (mohair) 6 130 0360 8519632 Red Oil Paints (mohair) 6 180 0447 6407633 Red Oil Paints (mohair) 6 230 0447 6300634 Red Oil Paints (mohair) 6 270 0445 4500
Brushes – Signwriter
Sash Tool Brushes
51708
• 70 Series brushes have timber handle and nickel plated ferrule
• 517 Series brushes have polypropylene (PP) handle and ferrule• Suitable for window painting • Ideal for cleaning machinery and tools
Mfr No. Size mm Handle Type Part Number
7002 10 Timber 0413 31067006 18 Timber 0413 35047008 25 Timber 0413 37087012 30 Timber 0413 400851704 16 Polypropylene 0453 385851706 18 Polypropylene 0453 395351708 25 Polypropylene 0453 4055
Brushes – Paint
Offset Handle Paint Brushes
• Uniquely designed handle fitted to an offset style head• Suitable for those very awkward to get at places
Mfr No. Size mm Part Number
04130808 38 0413 080804130905 50 0413 0905
Paint Brushes
• Industrial quality• Chinese black pig bristle set in epoxy resin• Nickel ferrule and painted polypropylene
(PP) handle• Suitable for general workshop, maintenance
and field service applications
• Ideal for use with paint, grease and lubricants
Size mm Part Number
12 0039 755525 0412 920438 0412 930150 0412 940875 0412 9602100 0412 9709
Professional Paint Brushes
• Reliable, long wearing, highly practical brush for the master painter
• Chinese black pig bristles set in a stainless steel ferrule
• Polypropylene (PP) handle• Varnish style handle• Suitable for a wide range of painting applications
in additionto MRO and general industrial use
Size mm Part Number
12 0412 910725 0759 011538 0787 501850 0732 691075 0074 3954100 0074 5254
BRUS
HES
, SPR
AYER
S &
EQ
UIPM
ENT
PAINTS, MARKING & SPRAY EQUIPMENT
30
30-18blackwoods.com.au
Plastic & Wooden Handle Varnish Brushes
• Low cost disposable workshop brushes• Suitable for general workshop, maintenance and field service applications• Ideal for use with paint, grease and lubricants
Size mm Handle Type Part Number
25 Plastic 0314 881538 Plastic 0413 010945 Plastic 0314 883250 Plastic 0413 020612 Wooden 0596 712625 Wooden 0413 000275 Wooden 0042 8723100 Wooden 0042 8740
Tar Brush
Mfr No. Size mm Type Part Number
60000388 57 Long handle - 1.20m 0424 5405
Brushes – Fitch
Lining Fitch Brushes20112
20325
• Available in pure bristle and polyester filament
• Hand crafted quality• Nickel plated ferrule• Suitable for extremely fine cutting-in and touch-up work
Mfr No. Size mm Type Part Number
20106 6 Pure bristle 0413 030320306 6 Polyester filament 0221 165720112 12 Pure bristle 0413 040020312 12 Polyester filament 0221 167420118 18 Pure bristle 0413 050720318 18 Polyester filament 0221 169120125 25 Pure bristle 0413 060420325 25 Polyester filament 0221 1708
Flat Fitch Brushes – 577 Series
• Suitable for sign and letter writing, art and craftwork
Mfr No. Size mm Size Part Number
5776 7.2 x 15 6 0413 73555778 10.1 x 17 8 0413 745257710 10.8 x 21 10 0413 755457712 11.5 x 29 12 0329 8755
Round Fitch Brushes – 777 Series
• Suitable for sign and letter writing, art and craftwork
Mfr No. Size mm Size Part Number
7772 3.4 x 12 2 0069 85617774 6.0 x 14 4 0413 14097776 8.1 x 18 6 0413 16037778 9.3 x 22 8 0413 170077710 12.0 x 24 10 0413 180777712 14.5 x 25 12 0413 1904
Brushes – Touch-up
Touch-up Brushes – Series 111
• Soft hair touch-up brush• Suitable for fine detail and craftwork
Mfr No. Diameter mm Size Part Number
11102 2.5 2 0075 696211104 3.5 4 0413 220411106 4 6 0413 230111108 5 8 0413 240811110 6 10 0075 775511112 8 12 0075 7960
Pencil Brushes.01
.08
5
• Premium quality brush• Round-head shaped brush with a soft
taper and lacquered handle• Premium squirrel hair is set in a vulcanised bonding agent• Suitable for solvent based paints• Ideal for automotive, art and general touch-up work
Mfr No. Size Part Number
3060V.01 .01 0343 47383060V.02 .02 0343 47043060V.04 .04 0343 47213060V.06 .06 0137 72963060V.08 .08 0137 73133060V 3 3 0413 21073060V 5 5 0445 36083060V 10 10 0576 2615
Brushes – Painter’s Dusting
Painter's Dusting Brush
• Designed for master painters who prefer the 4-knot style of duster in pure bristle• Aluminium ferrule and clear lacquered handle• Hog bristle
Mfr No. Size mm Part Number
104100 100 0053 6452
Brushes – Acid
2-Knot Acid Brush
• Tampico fibre resistant to acids• Seamless copper ferrules• Fibre weight: 170g (6oz)• Suitable for acid work and brick cleaning
Mfr No. Size mm Part Number
2006 125 0413 5104
Stencil Brush
• Nickel ferrule• Short and stiff• Suitable for filling in stencils and small stippling jobs
Mfr No. Size mm Part Number
16506 25 0413 5900
BRUSHES, SPRAYERS &
EQUIPM
ENT
PAINTS, MARKING & SPRAY EQUIPMENT
30
30-19 Call 13 73 23
Containers (Pots) – Paint
Paint Pot
• Galvanised steel finish• Heavy duty• Solid wire handle
Capacity Part Number
4.5L 0155 1105
Paint Tin with Lid
500ml
Capacity Part Number
500ml 0075 41541L 0040 25552L 0075 37544L 0040 2754
Drop Sheets – Paint
Cloth Drop Sheet – Pro Series
• Professional quality, reusable, fabric drop cloths in heavy duty cotton
Mfr No. Size m Part Number
870P 3.6 x 2.7 0038 5355871P 3.6 x 3.6 0038 5054873P 3.6 x 5.4 0087 5704
Sizes are approximate
MICROMAX® NS• Manufactured from high quality microporous fi lm laminate,
offering excellent liquid and dust protection in a soft and fl exible fabric with good moisture vapour transmission properties
• Single exposure coveralls that offer protection against hazardous dry particles and light splashes from low hazard liquid chemicals
• Two-way stretch fi lm results in good strength properties• Lakeland superb pattern featuring three piece hood and
crotch gusset for improved fi t and durability• Elasticised hood, waist, wrist and ankles• Ideal for spray painting (non-linting surfaces),
food processing, pharmaceutical processing and manufacturing, asbestos removal and handling, general cleaning and maintenance, and electronic assembly (non-linting and anti-static), clean room (may require additional cleaning) and protection against oils and resins
• Complies with chemical protective coveralls category III EN ISO 13982-1 Type 5 – Protection against hazardous dry particles
• Complies with chemical protective coveralls category III EN ISO 13034 Type 6 – Protection against light splashes and light sprays of liquid chemicals
• Complies with EN 1149-1 – Anti-static – must be worn with static dissipating footwear or wearer must be earthed
• Complies with EN 1073-2 – Protection against particulate radioactive contamination
• Complies with the US test ASTM F1671-97a – Against penetration of micro-biological bacteria
PART NUMBER 0724 3282
RELATED PRODUCT
SEE CLOTHING CHAPTER 09
EN1073-2
!
EN1149TYPE 6TYPE 5
Cloth Drop Sheet – CoverGrip
881P 882P 883P
• Slip-resistant canvas drop cloth
• Innovative design features thousands of rubberised traction dots, holds fast to floors
• Suitable for indoor or outdoor protection of surfaces and floors from paint, dust or stains
• Ideal for use on stairs
Mfr No. Dimensions Part Number
881P 3.65 x 1.06m 0215 4724882P 2.43 x 1.52m 0215 4741883P 3.04 x 2.43m 0215 4758
Spray Painting Equipment – Air
S-90 Series II Heavy Duty Spray Guns
High Performance
• Colour coded retaining ring• Suction and pressure feed models
available on request• High performance and durable for
most finishing applications
Mfr No. Colour Description Part Number
S102363 Grey General purpose spray gun (syphon feed) 0453 1464S102364 Red High performance spray gun (syphon feed) 0453 1362S102366 Green General purpose spray gun (pressure feed) 0453 1566
Suction Feed Gun
• Renowned DeVilbiss® atomisation quality• Removable air cap retaining baffle• Light smooth trigger action, reduces operator fatigue
Mfr No. Description Part Number
JGASHD-T 1.8mm with 1L pot 0529 9315
AIR HOSE ASSEMBLIES – CRIMPED• Temperature range: -23°C to +70°C• Tube: PVC• Reinforcement: spiral synthetic yarn• Cover: blue, PVC• Lightweight, non-conductive and
non-marking advanced hose• Good oil resistance• UV stabilised• Fitted with genuine Nitto 200 Series ‘One Touch’ Cuplas• Suitable for use in industrial, agriculture, automotive, construction,
building and multi-purpose applications• Ideal for air transfer with ultimate fl exibility in low and high
temperature applications• Exceeds AS/NZS 2554:1998 Class B
PART NUMBER 0210 9300
RELATED PRODUCT
SEE HOSE & HOSE FITTINGS CHAPTER 14
BRUS
HES
, SPR
AYER
S &
EQ
UIPM
ENT
PAINTS, MARKING & SPRAY EQUIPMENT
30
30-20blackwoods.com.au
Spray Gun Container
• Drip proof, lever locking and 3⁄8" BSP threaded swivel nut
Mfr No. Description Part Number
801-02 1L Syphon paint container with lid 0093 6754
Engine Cleaning Gun
• Air consumption: 141L/min @ 276kPa• Air connection: 1⁄4" BSP male• Suitable for degreasing, cleaning machinery and engines• Ideal for mould lubrication in die-casting and foundries
suction feed type
Mfr No. Description Part Number
S161001 Engine cleaning gun with container 0803 2902
Touch-Up Spray Gun
• Specially designed for touch-up operations where sensitivity of spray control is paramount
• Suction feed type• Air pressure: 140 – 280kPa• Air consumption: 55 – 115L/min• Air connection: 1⁄4" BSP male• Suitable for a wide range of automotive and industrial finishes
Mfr No. Description Part Number
S155000 Touch-up spray gun with container 0096 4556
Arnold SLS Medium Size Spray Gun
• High speed spraying for general purpose work• Syphon or pressure feed type• Air pressure: 155 – 450kPa• Air connection: 1⁄4" BSP male• Suitable for furniture, automotive refinishing or handyman work
Mfr No. Description Part Number
S106251 Spray gun with container – medium 0096 4454
SPRAY PAINTERS KIT• Complete respiratory system• Visor, auxiliary air hose for spray gun
or air tool• Waistbelt with activated carbon fi lter• Two person combination fi lter set,
including all airline fi ttings• 7.5m Air hose with fi ttings• Ideal for use when applying 2-pac paint• Complies with AS/NZS 1716:2012 –
Respiratory protection
PART NUMBER 0330 7425
RELATED PRODUCT
SEE SAFETY – PERSONAL PROTECTIVE EQUIPMENT CHAPTER 07
Gravity Fed Spray Guns
W400
• High transfer efficiency and less overspray for less wastage• Fine atomisation spray
W400
• Designed for base coat, clear coat, solvent and water borne applications
• Lightweight, ergonomic design• Available in 1.2, 1.3, 1.6, 1.8 and 2.5mm set-ups on request• Suitable for medium to large paint jobs in the automotive finish industry
LPH400
• Lightweight, ergonomic design• Available in 1.2, 1.6, and 1.8mm set-ups on request• Suitable for two-pack, enamels and Polyurethane (PU)• Ideal for medium to large paint jobs
AZ3HTE2
• Ergonomic design and polished body for easy cleaning• Available in 1.3, 1.5, 2.0, 2.5 and 3.0mm set-ups on request• Suitable for two-pack primer, enamels and contact adhesives• Ideal for automotive finish, industrial and manufacturing industries
Mfr No. Type Description Part Number
W400142GC W400 Gun & pot 1.4mm 0149 8608LPH400144C LPH400 Gun & pot 1.4mm 0129 3860AZ3HTE218C AZ3HTE2 Gun & pot 1.8mm 0529 8584
Suction and Pressure Feed Spray Guns
W200 with 1L Pot
• High transfer efficiency and less overspray for less wastage• Fine atomisation spray
W101
• Lightweight, ergonomic and compact design• Available in 0.8, 1.0, 1.5, and 1.8mm set-ups on request• Suitable for automotive refinish and furniture industries• Ideal for 2-pak, enamels and Polyurethane (PU)
W200
• Lightweight, ergonomic design• Available in 0.8, 1.0, 1.2, 1.5, 2.0 and 2.5mm set-ups on request• Suitable for furniture, engineering and industrial industries• Ideal for enamels, lacquers and primers
AZ1HTE20C
• Ergonomic design and Teflon-coated for easy cleaning• Available in 1.0, 1.3, 1.5, 1.8, 2.5 and 3.0mm set-ups on request• Suitable for industrial, furniture and manufacturing industries• Ideal for 2-pak, primers, enamels and contact adhesives
Mfr No. Type Description Part Number
W101131S W101 Spray gun only 1.3mm 0129 3775W200182S W200 Spray gun only 1.8mm 0129 3877W200182SC W200 Spray gun & 1L pot 1.8mm 0529 8652AZ1HTE20C AZ10HTE Spray gun & 1L pot 2.0mm 0529 8601
COMPRESSORS – BELT DRIVE – PORTABLE• Portable wheel mounted air compressors are robust,
professional, belt-driven units• Rugged, twin cylinder pumps constructed of aluminium
for maximum heat dissipation• Cast iron barrels for maximum wear resistance are driven by heavy duty
industrial fan cooled motors through fully guarded V-belt• Fitted with wheel mounted air receiver, complete with fi lter regulator• Fully automatic operation controlled by pressure switch• Motor is overload protected• Suitable for use with pneumatic tools which consume less than 270L/min of
air, such as drills, die grinders, impact wrenches, angle grinders and blowers
PART NUMBER 0579 1788
RELATED PRODUCT
SEE TOOLS – MACHINERY & WORKSHOP CHAPTER 26
BRUSHES, SPRAYERS &
EQUIPM
ENT
PAINTS, MARKING & SPRAY EQUIPMENT
30
30-21 Call 13 73 23
PEN
S &
MA
RKER
SHeavy Duty Suction/Pressure Feed Spray Guns
W77.2C
• Heavy duty conventional spray gun• Built-in air adjuster• Excellent manoeuvrability• High atomisation air caps available on request• Available in 1.2 and 2.5mm set-ups on request• Suitable for lacquers, enamels, primer and zinc,
and for industrial use
Mfr No. Description Part Number
W77.11 Spray gun only 1.5mm 0704 2274W77.2 Spray gun only 2.0mm 0821 0106W77.2C Spray gun & 1L pot 2.0mm 0529 8618
Disposable Spray Booth Filter
• Dry filter spray booths
Mfr No. Dimensions m Part Number
20-72-29 9.1 x 0.91 0533 2058
Spray Painting Equipment – Airless
Electric Airless Spray Unit
• Semi-professional unit for spraying lacquer, enamel, acrylic and latex paints out of 20L drums
• Electric diaphragm type pump • Includes: pump on trolley, 15m hose, gun and reversible tip• Motor size: 0.875hp• Max tip size: 0.019"• Suitable for use in factory maintenance
Mfr No. Description Fluid Output L/min Part Number
PS240F Airless spray unit 1.5 0529 8856
Pneumatic Airless Spray Units
ALS.333
ALS.333
• Continuous spraying of large paint jobs from 20L drums
• Includes: pump on trolley, 15m paint hose, gun and spray tip
• Pressure ratio: 25:1• Max fluid pressure: 170bar (2500psi)• Suitable for spraying lacquer, stain, sealer,
enamel and primer • Ideal for use in furniture and metal industries
ALS.433
• Continuous spraying of large paint jobs from 20L drums• Includes: pump on trolley, 15m paint hose, gun and spray tip• Pressure ratio: 30.1• Max fluid pressure: 210bar (3000psi)• Suitable for spraying enamel, primer and protective coatings• Ideal for use in construction and metal industries
Mfr No. Description Fluid Output L/min Part Number
ALS.333 Airless spray unit 2.5 0529 8958ALS.433 Airless spray unit 2.5 0529 8975ALG.7 Airless spray gun and tip 4.7 0531 3765
Markers – Industrial Pens
Texpen® Markers
• Medium line – steel ball tip paint marker• Writes sharp, defined bright marks• Writes through grease and oil, upside down
and underwater• Controlled paint flow by pressure bulb
Colour Std Pack Part Number
Black 12 0956 6118Blue 12 0005 6504Green 12 0630 4917Red 12 0023 9207White 12 0956 5711Yellow 12 0956 5915
No. 520 Bullet Tip – uni Markers
BlueBlack
• Medium line: 3.0mm approximately• Alcohol based• Xylene free• Fast drying• Waterproof
Colour Part Number
Black 0410 7037Blue 0410 7054Red 0410 7088
PX-20 – uni Paint Markers
Black Gold
Red
• Medium line: 2.8mm approximately• Opaque glossy paint• Spirit based• Aluminium barrel
Colour Part Number
Black 0410 6782Blue 0152 1864Gold 0410 6765Green 0152 1847Orange 0152 1830Pink 0074 7184Red 0152 1813Silver 0410 6799White 0002 5993Yellow 0002 6027
PAINTS, MARKING & SPRAY EQUIPMENT
30
30-22blackwoods.com.au
PENS &
MA
RKERSPX-21 – uni Paint Markers
Yellow
Silver
Pink
• Fine line: 1.2mm approximately• Marks on all surfaces• Spirit based• Aluminium barrel
Colour Part Number
Black 0410 6816Blue 0410 6833Pink 0410 6884Red 0410 6901Silver 0410 6918White 0410 6935Yellow 0410 6952
PX-30 – uni Paint Markers
Yellow
• Broad chisel tip: 4.0 – 8.5mm approximately• Opaque fadeproof ink• Waterproof uni Super Ink™ – does not run
when the surface is heated• Writes on practically every surface• Suitable for virtually all industrial applications
of markers where a broad line is required
Colour Part Number
Black 0792 3962Blue 0792 3979Red 0792 3996Yellow 0792 4013White 0792 4030
400, 440 & 444 Artline® Paint Markers
400
440 444
• Fade proof, permanent opaque markers• Fast drying, writes on any surface• Can withstand up to 100°C temperature exposure• Suitable for indoor or outdoor use • Ideal for hard to mark surfaces and black material• RoHs compliant ink
400
• 2.3mm Writing width, fibre tip nib
440
• 1.2mm Writing width, fibre tip nib
444
• 0.8mm Writing width, plastic tip nib
Model Colour Nib mm Part Number
400 Black 2.3 0311 4455400 White 2.3 0881 4719400 Red 2.3 0287 0452400 Yellow 2.3 0956 5517400 Blue 2.3 0287 0554400 Green 2.3 0287 0355440 White 1.2 0084 3999444 Black 0.8 0088 5309444 White 0.8 0059 7380
Paint Markers
Black
White
Yellow
• Permanent oil based opaque paint marker
• Quick drying ink marks opaque and glossy on light or dark surfaces
• AP Non-toxic, xylene free• Valve action nibs• Waterproof, fade and abrasion resistant• Suitable for metal, pottery, wood,
rubber, glass, and plastic
Model Colour Nib mm Part Number
Sharpie Oil Black 1.5 0216 9684Sharpie Oil White 1.5 0216 9701Sharpie Oil Yellow 1.5 0216 9718
Paint Markers
• High performance paint marker• Xylene-free, fast dry formula• Bold, easy to read marks• Replaceable, heavy duty nibs• Suitable for marking a range of surfaces
P10
• Medium bullet tip
P20
• Reversible bullet/chisel tip
Model Colour Part Number
P10 Black 0839 7735P10 Red 0839 7752P10 Yellow 0839 7769P10 White 0839 7786P20 Black 0839 7803P20 Red 0839 7820P20 Yellow 0839 7837P20 White 0839 7854P20 Blue 0982 8064P20 Green 0982 8081
40 Paint Crayon
• Permanent industrial paint crayon• Rough surfaces won't damage the nib• Dries in 5 – 7 minutes• Fade resistant and waterproof• Thermal resistance: -10°C to +200°C
Colour Part Number
Black 0771 6222Blue 0771 6256Red 0771 6239White 0771 6290Yellow 0771 6273
Action Marking Pen
• Lasts 12 times longer than fibre filled markers• Patented valve ensures Action Marker will not dry out• Marks will not smudge or rub off• Suitable for use on glass, timber, plastic and cardboard
Colour Std Pack Part Number
Black 12 0123 8155
Replacement chisel or bullet tips available
PAINTS, MARKING & SPRAY EQUIPMENT
30
30-23 Call 13 73 23
PEN
S &
MA
RKER
SHeavy Duty Ink Markers
• Refillable valve action marker• Reliable and heavy duty industrial marker• Refill with Dy-Mark’s P200 lightfast and
permanent marking ink
Type Colour Size Part Number
P200 Marker ink Black 1L 0027 9293P200 Marker ink Blue 1L 0530 9940P200 Marker ink Red 1L 0530 9957D90 Refillable marker – – 0496 5231D90 Belt holster – – 0530 0845
Maruzen Markers
• Valve action, general purpose heavy duty marker
• Non-toxic• Each marker provides up
to 6km of marking• Suitable for all surfaces including steel,
glass, wood, plastic, paper and leather
Type Colour Part Number
No.4 Black 0427 7907No.4 Blue 0427 8003No.4 Red 0427 8100
Mark-Tex Texpen
• Fine line ball point marker• Suitable for marking on all surfaces
Size mm Colour Part Number
3 Yellow 0031 08623 White 0031 0981
Ballmarkers & Inks
• Unique spring loaded ball valve writing head• Ink feed is controlled by a flexible
‘squeeze flow’ plastic bottle• Hardened tip ensures economical ink usage• Lightfast, waterproof and penetrates
grease, oil and rust• Suitable for providing permanent and
lightfast marks on steel, timber and tyres
Type Colour Size Part Number
Ballmarker Ink T400 Black 1L 0028 6093Ballmarker Ink T400 Blue 1L 0413 6957Ballmarker Ink T400 Green 1L 0530 0539Ballmarker Ink T400 Red 1L 0380 9554Ballmarker Ink T400 Yellow 1L 0799 5817Ballmarker Ink T400 White 1L 0486 5164Ballmarker Ink PB80 White 1L 0411 8529Ballmarker bottle – 125ml 0721 3923Ballmarker replacement tip – 4mm 0530 0454Ballmarker replacement tip – 6mm 0413 7054Ballmarker replacement tip – 8mm 0530 0437
Trades Marker
• All purpose marker• Moisture resistant marks• Does not require sharpening• Handy pocket clip• Push button stick advance• Suitable for marking on metal, plastic, glass, wood, china,
cardboard and paper• Ideal for fabrication and packaging applications
Type Colour Std Pack Part Number
Trades Marker with 5 refills Assorted 5 0530 0369Trades Marker refills Orange 6 0530 0335Trades Marker refills White 6 0530 0301Trades Marker refills Yellow 6 0530 0284Trades Marker refills Black 6 0530 0352Trades Marker refills Red 6 0530 0318
Metal Markers – Silver-Streak®
Flat Round
• Will not rub off like soapstone• Supplied with metal holder to prevent damage• Suitable for metal layout, fabrication and
all metal surfaces
Type Std Pack Part Number
Silver-Streak® holder – flat 1 0531 0008Silver-Streak® holder – flat 10 0530 0420Silver-Streak® refills – flat 25 0531 0059Silver-Streak® refills – flat 100 0531 0076Silver-Streak® holder – round 1 0531 0025Silver-Streak® refills – round 6 0531 0042
Metal Markers – Red-Riter®
Marker Refills
• Highly visible marks• Fine line marker suitable for all metal surfaces• Suitable for metal layout and fabrication• Ideal for aluminium and stainless steel
Type Std Pack Part Number
Red-Riter® marker – flat 10 0530 0403Red-Riter® refills – flat 25 0530 0386
Ink Markersi70
iFlip
iFine
• Quick drying• Waterproof marks• Longer cap off time • Convenience of both bullet and chisel tips• Suitable for metal, wood, glass, ceramics,
plastics, rubber, concrete, stone, paper and cardboard
Model Colour Part Number
i70 Black 0200 4903i70 Red 0200 4920i70 Blue 0200 4937i90 Black 0200 4954i90 Red 0200 4971i90 Blue 0200 4988
PAINTS, MARKING & SPRAY EQUIPMENT
30
30-24blackwoods.com.au
PENS &
MA
RKERSModel Colour Part Number
iFlip Mixed 0200 5005iFlip Black 0200 5022iFlip Red 0200 5039iFlip Blue 0200 5056iFine Black 0200 5073iFine Red 0200 5090iFine Blue 0200 5107
Crayons & Chalk
Lumber Crayons
• Industrial quality• General purpose crayon• Suitable for use marking of timber,
concrete, cardboard and most difficult surfaces
Colour Std Pack Part Number
White 12 0403 5806Yellow 12 0403 5709Red 12 0403 5602Green 12 0403 5408Blue 12 0403 5301Black 12 0403 5505Fluorescent Orange 12 0221 9851
Industrial Crayons
Standard
Fluorescent
• Industrial quality, versatile marking crayon• Fluorescent colours can be used with
most automated docking machines• Suitable for rubber, steel, glass,
concrete, leather, plastic, polystyrene and all timbers
• Ideal for underwater and wet surfaces
Colour Std Pack Part Number
White 12 0221 9868Orange 12 0221 9885Red 12 0221 9902Green 12 0221 9936Blue 12 0221 9970Purple 12 0221 9919Brown 12 0221 9953Black 12 0221 9987Fluorescent Yellow 12 0222 0004Fluorescent Yellow/Orange 12 0222 0021Fluorescent Orange 12 0222 0038Fluorescent Pink 12 0222 0055Fluorescent Dark Pink 12 0222 0072Fluorescent Magenta 12 0222 0089Fluorescent Red 12 0222 0106Fluorescent Purple 12 0222 0123Fluorescent Brown 12 0222 0140Fluorescent Green 12 0222 0157Fluorescent Dark Green 12 0222 0174Fluorescent Blue 12 0222 0191
Engineer's Chalk• Leaves sharp white lines• Water-resistant• Industrial quality• Available in full blocks or splits• Suitable to mark steel, concrete, masonry and timber
Description Dimensions mm Colour Std Pack Part Number
Special split 10 x 5 x 75 White 88 0931 7516Large stick 10 x 10 x 75 White 44 0403 3808Slab 10 x 60 x 75 White 8 0403 3701
PROTECTIVE HAND CREAM• Solvent resistant barrier cream• Contains lanolin to help prevent industrial dermatitis• Protects skin from dry powders, dusts, oil, grease
and solvents• 500ml pump pack
PART NUMBER 0492 9760
RELATED PRODUCT
SEE HYGIENE, JANITORIAL & CLEANING CHAPTER 11
ELIMINATOR HAND CLEANER• Heavy duty hand cleaner • Non-petroleum, non-hazardous
and biodegradable• Suitable for safely removing enamel
and acrylic paints, adhesives, body fi llers and other resin-based products
• 4L pump pack
PART NUMBER 0102 2302
RELATED PRODUCT
SEE HYGIENE, JANITORIAL & CLEANING CHAPTER 11
KNEE PADS – KNEEON• Acid, oil and heat resistant face, easy
to adjust straps, removable inserts • Highest level of mobility with
adequate knee protection• Lightweight, low profi le to lessen
catching and fatigue• Top and bottom straps to keep the
knee pad securely against the leg• Stabiliser insert offers a higher level of comfort and impact protection • Designed for trades such as electrical and building where the user is
kneeling for short periods and is highly mobile around the site• LKPF – Straps of high visibility orange for safety. LKPN - Blue
PART NUMBER 0144 1811
RELATED PRODUCT
SEE CLOTHING CHAPTER 09
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
LIFTING & RIGGING
MANUAL HANDLING & STORAGE
WELDING & GAS
ABRASIVES
TAPES & PACKAGING
FASTENERS & FIXINGS
SAFETY - PERSONAL PROTECTIVE EQUIPMENT
SAFETY - SITE & ENVIRONMENTAL
CLOTHING
FOOTWEAR
HYGIENE, JANITORIAL & CLEANING
VALVES & FLOW CONTROL
PIPE & TUBE FITTINGS
HOSE & HOSE FITTINGS
GASKET MATERIAL, PACKING & SEALS
PUMPS
LUBRICANTS & LUBRICATION EQUIPMENT
POWER TRANSMISSION
BEARINGS
ELECTRICAL
AUTOMOTIVE
OFFICE, STATIONERY & KITCHEN
TOOLS - HAND, MEASURING & PRECISION
TOOLS - CUTTING, THREADING & CARBIDE
TOOLS - POWER, PNEUMATIC & PETROL
TOOLS - MACHINERY & WORKSHOP
HARDWARE
LADDERS & PLATFORMS
BUILDING & CONSTRUCTION MATERIALS
PAINTS, MARKING & SPRAY EQUIPMENT
ADHESIVES, SEALANTS & FILLERS
STEEL & METALS