paint basics for applicators dan p. buelk pcs presented by:
TRANSCRIPT
PAINT BASICS
for APPLICATORS
Dan P. Buelk PCSPresented by:
Paint....Simple?
Yes!
It’s nothing more than a…
Chemical
Menagerie
in
A
Can!
Whatcha paintin?• Look familiar?
Let’s get ready to paint...
• What’s the surface aka substrate?• Drywall, wood, stucco or EIFS?• Block ~ Concrete ~ Masonry?• Metal ~ Ferrous or Non-ferrous?• Galvanized – is it spangled?• Pre-Painted – with what?• New – or has it already been coated?
Paint....Simple!!!
• Paint comes in a CAN!
It’s ALL on the Can!
• Where to use it...
• Surface prep requirements...
• Application...
• Coverage...
• Dry times...
• Clean-up...• SEE THE DATA SHEET FOR MORE DETAILS!
If All ELSE FAILS...read & follow
• By Label Direction!• Each coating has it’s own little
quirks!
• -Oilpaints are effected by temperature
• -Latex paints are effected by humidity
• -Waterbornes paints are effected by surface preparation
• -Epoxies are effected by...
• d. All of the above.
Paint....Simple!!!
• Paint comes in a CAN!
• Paint is usually WET!
The 4 PAINT Basics...
• Solids
• Binder
• Additives
• Vehicle
How much do you need?
• A liquid having 100% VOLUME SOLIDSWill cover an area 1604 square feet @ 1 mil thick
• How large an area are you painting?
• What are the VOLUME SOLIDS of the paint you are going to use?
• Coverage @ 1 mil=1604 x VS%
• What DRY FILM THICKNESS is recommended?
• Coverage @ Rec. DFT=Coverage @ 1DFT/Rec Mils
• Gallons needed = Area to painted / Rec. DFT
Is it READY to PAINT, yet?
• Loose flakes removed & sanded
• Holes filled• Bare Areas PRIMED?
What’s in the BUDGET?
• Surface Preparation requirements of the coating
• Expected longevity• Number of Coats needed
for SYSTEM• Are specifications
WRITTEN?• Who’s going to do the
work?
1stQtr
2ndQtr
3rdQtr
4thQtr
0
10
20
30
40
50
60
70
80
90
1stQtr
2ndQtr
3rdQtr
4thQtr
East
West
North
QUALITY PAYS REWARDS!
• Do the surface prep to Label Direction!
• Use the HIGHEST quality coating available!
• It’s cheaper to do it RIGHT!!!
• than it is to do it AGAIN!!!
I know...
• It’s not in the BUDGET!
• & the.....
• is in the...
Surface Prep, what’s that?
• Is it CLEAN?
• I mean CLEAN!!!
• REALLY CLEANREALLY CLEAN?• And is it…
• S = sound?
• C = clean?
• A = abraded?
• D = dry?
Paint....Simple!!!
• Paint comes in a CAN!
• Paint is usually WET!
• Apply WET paint to SURFACE!
How ya gunna get it out the bucket?
– Apply WET paint to SURFACE!
• Brush = 98% Efficient
• Roll = 96% Efficient
• Spray...
• Airless = 50% Efficient
• Air = 25% Efficient
• HVLP = 85% Efficient
They want to use it WHEN?!?*#@!
• Remember...the term...
• COATING SYSTEMCOATING SYSTEM• This is to include surface preparation, one coat of
primer (as needed) and either..• One FINISH Coat or• an Intermediate Coat & 1 or 2 Finish Coats• SO,
Paint....Simple!!!
• Paint comes in a CAN!
• Paint is usually WET!
• Apply WET paint to SURFACE!
•Paint DRIES!!!
Ok...you spread the paint...
• Now let it dry...
• Look @ the CAN...
• 1 hour, 2 hours, 4 hours or...
• OVERNITE!
• &
• What’s the RECOAT time?
Picking A Paint & Manufacturer...is not so simple!!!
• Pittsburgh Paints
• Alocit (you can apply under water!)
• Magic Paint
• Jotun Paint
• Flood-Pro Stains
• PPG MegaSeal Finishes
• EnviroPeel
Do it RIGHT call...
• High Quality Coatings!• Just in Time delivery!• Paint for every situation!• And every project budget• Architectural...• Commercial...• Industrial...• So, lets’ get to work...
What’s your Name? I got your Number...• ManorHall 86 Line
• SpeedHide 6 Line
• Direct to Metal Acrylic 90 Line
• Aquapon (Solvent Based) 97- (Call Danny on this one!)
• Aquapon-WB 98 Line
• Alocit 98.15• SunProof 78 Line, ect
• Pitthane Ultra 95-?
We’ll do our part to help!
• Professional advise on the coating type needed
• Stay within your budget
• We’ll be readily available throughout your job• We have the expertise to make the job GO RIGHT!!!
• Hassle FREE!!!
• All we ask you to do is....
Just...ASK4DAN(757) 871-3871