page 1 of 104...page 4 of 104 101 best homemade automotive tools from homemadetools.net vehicle vise...

of 104

101 Best Homemade Automotive Toolsfrom HomemadeTools.net

This ebook contains the 101 best homemadeautomotive tools from HomemadeTools.net.

Click on any homemade tool to see more photos,details, or videos of the homemade tool.

For the newest homemade automotive tools, clickthe link below:

Click here for the latesthomemade automotive tools

of 104

http://www.homemadetools.net/category/automotive?utm_source=ebook&utm_campaign=bestautomotivetools&sort=publication.desc


101 Best Homemade Automotive Tools from HomemadeTools.net

Axle Standsby: thehomeengineer

Homemade axle stands constructed fromtubing and steel pins. Provides an extrameasure of safety when lifting a vehicle.

Click here for more details on: Axle Stands

of 104

http://www.homemadetools.net/forum/axle-stands-67484?utm_source=ebook&utm_campaign=bestautomotivetools#post110710




Bolt-on Receiver Hitchby: Frank S

Homemade bolt-on receiver hitch constructedfrom steel plate, tubing, nuts, bolts, and ahitch ball.

Click here for more details on: Bolt-on Receiver Hitch

of 104

http://www.homemadetools.net/forum/bolt-transport-reciever-hitch-28877?utm_source=ebook&utm_campaign=bestautomotivetools#post39268




Vehicle Viseby: naughtyboy

Homemade vehicle vise fabricated from steeland intended to facilitate impromptu repairsduring off-road adventures.

Click here for more details on: Vehicle Vise

of 104

http://www.homemadetools.net/forum/vehicle-vice-232?utm_source=ebook&utm_campaign=bestautomotivetools#post632




Engine Tilterby: brianhw

Homemade engine tilter constructed from asurplus jack, hooks, and tubing.

Click here for more details on: Engine Tilter

of 104

http://www.homemadetools.net/forum/homemade-engine-leveller-tilter-56272?utm_source=ebook&utm_campaign=bestautomotivetools#post83369




Mini Dozerby: dozerbuilder01

Homemade mini dozer adapted from a zeroturn mower. Bodywork was fabricated fromsteel and intended to replicate theappearance of a Caterpillar Model 22.

Click here for more details on: Mini Dozer

of 104

http://www.homemadetools.net/forum/caterpillar-twenty-two-mini-dozer-build-13729?utm_source=ebook&utm_campaign=bestautomotivetools#post16985




Chassis Jig Tablesby: astroracer

Homemade chassis jig tables featuring slidingH-beams to accommodate varying trackwidths. Mobility and leveling are eachfacilitated with both casters and jacking lugs,respectively, at each corner. One tableincorporates a melamine top to enable layoutmarking directly on the washable surface.

Click here for more details on: Chassis Jig Tables

of 104

http://www.homemadetools.net/forum/homemade-chassis-jig-tables-72?utm_source=ebook&utm_campaign=bestautomotivetools#post179




Air Bag Liftby: Ed ke6bnl

Homemade lift consisting of two stacked airbags placed atop an automotive wheel dolly.A wooden block serves as a cushion betweenthe upper bag and the vehicle's lifting point.

Click here for more details on: Air Bag Lift

of 104

http://www.homemadetools.net/forum/engine-motor-jack-4424?utm_source=ebook&utm_campaign=bestautomotivetools#post5397




Adjustable Standsby: kess

Homemade adjustable stands constructedfrom bar stock, threaded rod, nuts, andtubing.

Click here for more details on: Adjustable Stands

of 104

http://www.homemadetools.net/forum/adjustable-stands-47263?utm_source=ebook&utm_campaign=bestautomotivetools#post67635




Rearend Cradleby: jniolon

Homemade floor jack adaptor cradle designedto facilitate the installation of a rearend.Fabricated from schedule 40 pipe. Cradle isadjustable side-to-side to allow for differentspring saddles, and includes an adjustablearm that supports the nose.

Click here for more details on: Rearend Cradle

of 104

http://www.homemadetools.net/forum/rearend-cradle-43?utm_source=ebook&utm_campaign=bestautomotivetools#post113




Free Standing Truck Bed Slideby: Keith William Knull

Homemade free-standing truck bed slideconstructed from 2x4s, pressure-treatedplywood, and casters.

Click here for more details on: Free Standing Truck Bed Slide

of 104

http://www.homemadetools.net/forum/free-standing-truck-bed-slide-29914?utm_source=ebook&utm_campaign=bestautomotivetools#post40985




Topside Mechanic Creeperby: Imabass

Homemade topside mechanic creeperconstructed from surplus lumber, 2x4s, aladder, and a ratcheting strap.

Click here for more details on: Topside Mechanic Creeper

of 104

http://www.homemadetools.net/forum/topside-mechanic-creeper-69608?utm_source=ebook&utm_campaign=bestautomotivetools#post117966




Tiltable Cab Dollyby: chief36chevy

Homemade tiltable cab dolly featuringhinge-mounted 2x4s intended to enableone-man access to the cab's bottom surface.An engine crane is utilized to rotate the cababout one hinge. Dolly is caster-mounted forimproved mobility.

Click here for more details on: Tiltable Cab Dolly

of 104

http://www.homemadetools.net/forum/tilt-able-cab-dolly-2547?utm_source=ebook&utm_campaign=bestautomotivetools#post3332




Brake Line Bending Fixtureby: astroracer

Homemade brake line bending fixtureconstructed from aluminum plate and bolts.

Click here for more details on: Brake Line Bending Fixture

of 104

http://www.homemadetools.net/forum/building-brake-line-bending-fixture-55822?utm_source=ebook&utm_campaign=bestautomotivetools#post82597




Vacuum Testing Machineby: Hotz

Homemade vacuum testing machineconstructed from an inhaler machine, anelectrical box, a power switch, a vacuumgauge, hose, wire, and high-density foam.Intended to facilitate the process of testingengine valve seal efficiency.

Click here for more details on: Vacuum Testing Machine

of 104

http://www.homemadetools.net/forum/test-vacuum-15751?utm_source=ebook&utm_campaign=bestautomotivetools#post20772




Carburetor Standby: bobs409

Homemade carburetor stand constructed fromsurplus engine valves, collars, and setscrews.

Click here for more details on: Carburetor Stand

of 104

http://www.homemadetools.net/forum/carburetor-work-stands-old-valves-56664?utm_source=ebook&utm_campaign=bestautomotivetools#post84118




Carburetor Monitoring Systemby: chy_farm

Homemade carburetor diaphragm monitoringsystem constructed from a displacementdetector, magnetic coil, signal amplifier,voltage divider, analog-to-digital converter, ahomemade pulser coil, and a laptop.

Click here for more details on: Carburetor Monitoring System

of 104

http://www.homemadetools.net/forum/carburetor-diaphragm-movement-detector-its-system-67278?utm_source=ebook&utm_campaign=bestautomotivetools#post109996




Hydraulic Jack Standsby: 67mustangal

Homemade hydraulic jack stands fabricatedfrom angle iron and utilizing 1-ton bottle jacksto supply the lifting force. Jacks provide extraworking clearance without compromisingstability.

Click here for more details on: Hydraulic Jack Stands

of 104

http://www.homemadetools.net/forum/hydraulic-jack-stands-78?utm_source=ebook&utm_campaign=bestautomotivetools#post197




Wall-Mounted Bead Breakerby: wadeamca

Homemade wall-mounted bead breakeradapted from a truck's receiver hitch.

Click here for more details on: Wall-Mounted Bead Breaker

of 104

http://www.homemadetools.net/forum/shop-bead-breaker-11156?utm_source=ebook&utm_campaign=bestautomotivetools#post13289




Engine Crane Come-Alongby: chief36chevy

Homemade engine crane come-alongmodification utilizing a pair of pulleys to yieldincreased range of operation.

Click here for more details on: Engine Crane Come-Along

of 104

http://www.homemadetools.net/forum/adding-comalong-engine-crane-2550?utm_source=ebook&utm_campaign=bestautomotivetools#post3337




Puzzle Nut Keyby: Don42

Homemade puzzle nut key constructed fromsteel stock and drill rod.

Click here for more details on: Puzzle Nut Key

of 104

http://www.homemadetools.net/forum/key-trailer-wheel-puzzle-nut-42767?utm_source=ebook&utm_campaign=bestautomotivetools#post61705




Tire Liftby: ruxu

Homemade tire lift constructed from a surplusfloor jack, tubing, bar stock, and bearings.

Click here for more details on: Tire Lift

of 104

http://www.homemadetools.net/forum/tire-lift-aligner-60847?utm_source=ebook&utm_campaign=bestautomotivetools#post92298




Truck Wheel Ring Straightenerby: Frank S

Homemade truck wheel ring straightenerconstructed from a length of bar stock and acam bolted to the work table.

Click here for more details on: Truck Wheel Ring Straightener

of 104

http://www.homemadetools.net/forum/truck-wheel-ring-straightener-67195?utm_source=ebook&utm_campaign=bestautomotivetools#post109794




D10 Bulldozer Blade Conversionby: Frank S

Homemade D10 bulldozer blade conversionconstructed by modifying the structure of asurplus U-shaped bulldozer blade.

Click here for more details on: D10 Bulldozer Blade Conversion

of 104

http://www.homemadetools.net/forum/d10-dozer-blade-conversion-40314?utm_source=ebook&utm_campaign=bestautomotivetools#post57141




Wreckerby: Jerrdan john

Homemade wrecker constructed from scrapand surplus components. Utilizes a Chevronboom and three 10,500 pound 2-speedwinches. Features wireless remote operation.

Click here for more details on: Wrecker

of 104

http://www.homemadetools.net/forum/home-built-wrecker-19996?utm_source=ebook&utm_campaign=bestautomotivetools#post28420




Modular Body Cartby: astroracer

Body cart made from scrap pressure-treatedlumber. Includes modular top that can bemodified to accommodate various automotivebodies.

Click here for more details on: Modular Body Cart

of 104

http://www.homemadetools.net/forum/body-cart-pickup-cab-69?utm_source=ebook&utm_campaign=bestautomotivetools#post162




VW Engine Standby: teched

Homemade VW engine stand constructedfrom a surplus hospital bed table, lawnmowerbrackets, and trailer jack pipe.

Click here for more details on: VW Engine Stand

of 104

http://www.homemadetools.net/forum/vw-engine-stand-hospital-bed-table-29379?utm_source=ebook&utm_campaign=bestautomotivetools#post40167




Screw Standsby: Frank S

Homemade screw stands constructed frompipe, scaffolding screws, and lumber.

Click here for more details on: Screw Stands

of 104

http://www.homemadetools.net/forum/simple-screw-stands-69055?utm_source=ebook&utm_campaign=bestautomotivetools#post115378




Seal Installation Toolsby: Catfish

Homemade seal installation tools fashionedfrom HDPE and based on actual sealdimensions.

Click here for more details on: Seal Installation Tools

of 104

http://www.homemadetools.net/forum/seal-install-tools-dodge-98-4x4-front-axle-seals-10292?utm_source=ebook&utm_campaign=bestautomotivetools#post12193




Pedal Depressorby: woodstockva

Homemade pedal depressor constructed froma non-retracting caulking gun, a 4' length of1/4" steel rod, a 5/16" ID fuel line, and aU-bolt.

Click here for more details on: Pedal Depressor

of 104

http://www.homemadetools.net/forum/how-make-pedal-depressor-7268?utm_source=ebook&utm_campaign=bestautomotivetools#post8677




Chassis Jigby: Astro

Homemade chassis jig constructed from3"x2"x1/8" RHS steel. Features four integralleveling feet. Intended to facilitate the processof enlarging a racecar's cockpit whilemaintaining all other critical measurements.

Click here for more details on: Chassis Jig

of 104

http://www.homemadetools.net/forum/racecar-project-chassis-jig-17970-2?utm_source=ebook&utm_campaign=bestautomotivetools#post25335




Tappet Locking Toolby: Hotz

Homemade tappet locking tool adapted froma sharpening file. Intended to facilitate theprocess of performing valve adjustments.

Click here for more details on: Tappet Locking Tool

of 104

http://www.homemadetools.net/forum/locking-tool-tappet-valve-19023?utm_source=ebook&utm_campaign=bestautomotivetools#post26631




Valve Seal Installation Toolsby: Hotz

Homemade valve seal installation toolsfashioned in a range of sizes and zinc-coated.

Click here for more details on: Valve Seal Installation Tools

of 104

http://www.homemadetools.net/forum/installer-seals-valves-18996?utm_source=ebook&utm_campaign=bestautomotivetools#post26604




Axle Nut Socketsby: Frank S

Homemade axle nut sockets constructed fromflat bar stock and surplus sockets.

Click here for more details on: Axle Nut Sockets

of 104

http://www.homemadetools.net/forum/axle-nut-sockets-28308?utm_source=ebook&utm_campaign=bestautomotivetools#post38516




Chassis Jig Spindle Fixtureby: astroracer

Homemade chassis jig spindle fixtureconstructed from tubing, flat bar stock, andwashers.

Click here for more details on: Chassis Jig Spindle Fixture

of 104

http://www.homemadetools.net/forum/chassis-jig-spindle-fixtures-36850?utm_source=ebook&utm_campaign=bestautomotivetools#post50997




Engine Hoist Cab Attachmentby: Super 55

Homemade engine hoist cab attachmentconstructed from lumber.

Click here for more details on: Engine Hoist Cab Attachment

of 104

http://www.homemadetools.net/forum/truck-cab-attachment-engine-hoist-37084?utm_source=ebook&utm_campaign=bestautomotivetools#post51410




Automotive Wiring Organizerby: astroracer

Homemade automotive wiring organizerconstructed from cardboard, a surplusaluminum pole, lumber, and screw eyes.

Click here for more details on: Automotive Wiring Organizer

of 104

http://www.homemadetools.net/forum/cheap-automotive-wiring-organizer-39940?utm_source=ebook&utm_campaign=bestautomotivetools#post56281




Belt Tensioner Socketby: sossol

Homemade belt tensioner socket constructedfrom a spark plug socket and a 6-point socket.

Click here for more details on: Belt Tensioner Socket

of 104

http://www.homemadetools.net/forum/honda-element-serpentine-belt-tensioner-socket-failure-46470?utm_source=ebook&utm_campaign=bestautomotivetools#post66481




Differential Square Socketby: mattthemuppet

Homemade differential square socketconstructed from hex bar stock.

Click here for more details on: Differential Square Socket

of 104

http://www.homemadetools.net/forum/13mm-square-socket-subaru-rear-differential-54525?utm_source=ebook&utm_campaign=bestautomotivetools#post80097




Strap Wrenchby: dtech

Homemade strap wrench constructed from asurplus socket, timing belt, washer, andtubing.

Click here for more details on: Strap Wrench

of 104

http://www.homemadetools.net/forum/strap-tool-filter-tool-56656?utm_source=ebook&utm_campaign=bestautomotivetools#post84110




Wiper Removal Toolby: franklynb

Homemade wiper removal tool constructedfrom tubing, steel stock, and a nut and bolt.

Click here for more details on: Wiper Removal Tool

of 104

http://www.homemadetools.net/forum/windshield-wiper-removal-tool-57470?utm_source=ebook&utm_campaign=bestautomotivetools#post85660




GM Radio Removal Toolby: nortin

Homemade GM radio removal toolconstructed from a surplus screwdriver handleand a pneumatic quick connect fitting.

Click here for more details on: GM Radio Removal Tool

of 104

http://www.homemadetools.net/forum/gm-car-truck-radio-removal-tool-57759?utm_source=ebook&utm_campaign=bestautomotivetools#post86191




Hydroboost Nut Socketby: Frank S

Homemade Hydroboost nut socketconstructed from surplus pipe.

Click here for more details on: Hydroboost Nut Socket

of 104

http://www.homemadetools.net/forum/hydroboost-mounting-nut-socket-59959?utm_source=ebook&utm_campaign=bestautomotivetools#post90436




Hub Nut Socketby: Frank S

Homemade hub nut socket constructed fromsurplus pipe and a screwdriver.

Click here for more details on: Hub Nut Socket

of 104

http://www.homemadetools.net/forum/ford-hub-nut-socket-62664?utm_source=ebook&utm_campaign=bestautomotivetools#post96813




Bushing Install Toolby: Frank S

Homemade bushing install tool constructedfrom round bar stock.

Click here for more details on: Bushing Install Tool

of 104

http://www.homemadetools.net/forum/s-cam-bushing-install-tool-69560?utm_source=ebook&utm_campaign=bestautomotivetools#post117556




Chassis Rotisserie Conversionby: astroracer

Homemade chassis rotisserie conversionbased on a pair of 1,000 lb. capacity enginestands. Features solid 10" casters on one endand swivels on the other. Frames are securedto the rotisserie with 2" x 2" U-bolts.

Click here for more details on: Chassis Rotisserie Conversion

of 104

http://www.homemadetools.net/forum/chassis-rotisserie-71?utm_source=ebook&utm_campaign=bestautomotivetools#post174




Helping Handby: nortin

Homemade helping hand utilized to hold aflywheel stationary while torquing theflywheel-to-crankshaft bolts.

Click here for more details on: Helping Hand

of 104

http://www.homemadetools.net/forum/helping-hand-2702?utm_source=ebook&utm_campaign=bestautomotivetools#post3501




Adjustable Pushrod Length Checkerby: Cobalt327

Homemade pushrod length checker intendedto aid in determination of valve traingeometry. Constructed from a used pushrodand threaded stock.

Click here for more details on: Adjustable Pushrod Length Checker

of 104

http://www.homemadetools.net/forum/adjustable-push-rod-length-checker-5?utm_source=ebook&utm_campaign=bestautomotivetools#post7




Magneto Static Timing Unitby: Greg Dix

Homemade magneto static timing unit basedon the principal of sensing the coil's inductivereactance.

Click here for more details on: Magneto Static Timing Unit

of 104

http://www.homemadetools.net/forum/magneto-static-timing-unit-15806?utm_source=ebook&utm_campaign=bestautomotivetools#post20917




Pinion Bearing Toolby: Frank S

Homemade pinion bearing tool constructedfrom a surplus bearing.

Click here for more details on: Pinion Bearing Tool

of 104

http://www.homemadetools.net/forum/pinion-shaft-bearing-install-tool-68703?utm_source=ebook&utm_campaign=bestautomotivetools#post114283




Slide Hammer Bearing Puller Adaptorby: Frank S

Homemade slide hammer bearing pulleradaptor constructed from steel rod and a pairof nuts.

Click here for more details on: Slide Hammer Bearing Puller Adaptor

of 104

http://www.homemadetools.net/forum/slide-hammer-bearing-puller-adapter-68788?utm_source=ebook&utm_campaign=bestautomotivetools#post114504




Universal Pulley Holderby: blknblu

Homemade universal pulley holder inspiredby the OTC 4754 tool and intended tofacilitate the process of loosening thecrankshaft pulley of a Mazda 1.8L FP engine.Constructed from two flat bars, sourced fromHF ratchet clamps, and two M8 bolts.

Click here for more details on: Universal Pulley Holder

of 104

http://www.homemadetools.net/forum/universal-crankshaft-pulley-holder-automotive-5414?utm_source=ebook&utm_campaign=bestautomotivetools#post6524




Oil Cooler Testerby: Frank S

Homemade oil cooler tester constructed froma foot-operated bicycle pump, tire valve, anda metal pan.

Click here for more details on: Oil Cooler Tester

of 104

http://www.homemadetools.net/forum/dodge-cummins-oil-cooler-tester-40389?utm_source=ebook&utm_campaign=bestautomotivetools#post57284




Stuck Engine Flywheel Toolby: KustomsbyKent

Homemade stuck engine flywheel toolconstructed from steel plate, bar stock, nuts,and bolts.

Click here for more details on: Stuck Engine Flywheel Tool

of 104

http://www.homemadetools.net/forum/stuck-engine-flywheel-tool-41423?utm_source=ebook&utm_campaign=bestautomotivetools#post59675




Engine Loosening Toolby: Frank S

Homemade engine loosening tool constructedfrom bar stock and a hex fitting.

Click here for more details on: Engine Loosening Tool

of 104

http://www.homemadetools.net/forum/stuck-engine-tool-46510?utm_source=ebook&utm_campaign=bestautomotivetools#post66550




Compression Testerby: Cascao

Homemade compression tester constructedfrom a gauge, high pressure hose, Schradervalve, and homemade adaptors.

Click here for more details on: Compression Tester

of 104

http://www.homemadetools.net/forum/engine-compression-tester-56336?utm_source=ebook&utm_campaign=bestautomotivetools#post83474




Engine Locating Jigby: astroracer

Homemade engine locating jig constructedfrom tubing, angle iron, and motor mounts.

Click here for more details on: Engine Locating Jig

of 104

http://www.homemadetools.net/forum/engine-locating-jig-56515?utm_source=ebook&utm_campaign=bestautomotivetools#post83815




Valve Holding Colletby: tonyfoale

Homemade valve holding collet constructedfrom aluminum stock.

Click here for more details on: Valve Holding Collet

of 104

http://www.homemadetools.net/forum/valve-holding-measuring-collet-58294?utm_source=ebook&utm_campaign=bestautomotivetools#post87183




Valve Removal Toolby: sossol

Homemade valve removal tool constructedfrom a C-clamp and surplus washing machinedrive gears.

Click here for more details on: Valve Removal Tool

of 104

http://www.homemadetools.net/forum/quick-ugly-overhead-valve-remover-tool-60057?utm_source=ebook&utm_campaign=bestautomotivetools#post90583




Pulley Removal Toolby: TexBuxer

Homemade pulley removal tool constructedfrom surplus steel stock, threaded rod, andbolts.

Click here for more details on: Pulley Removal Tool

of 104

http://www.homemadetools.net/forum/pulley-removal-tools-62326?utm_source=ebook&utm_campaign=bestautomotivetools#post96051




Brake Caliper Piston Wind Back Toolby: ian

Homemade brake caliper piston wind backtool designed for working on the rear brakepiston calipers of Volkswagen vehicles.Fabricated from an M10x100mm bolt, largewasher, 2 M10 nuts, piece of 1/8th plate, and2 M6 set screws.

Click here for more details on: Brake Caliper Piston Wind Back Tool

of 104

http://www.homemadetools.net/forum/homemade-brake-caliper-piston-wind-back-tool-45?utm_source=ebook&utm_campaign=bestautomotivetools#post124




Disc Brake Caliper Toolby: hemifan

Homemade disc brake caliper tool adaptedfrom a caulking gun.

Click here for more details on: Disc Brake Caliper Tool

of 104

http://www.homemadetools.net/forum/disc-brake-caliper-tool-7614?utm_source=ebook&utm_campaign=bestautomotivetools#post9072




One-Person Brake Bleederby: jere

Homemade one-person brake bleederconstructed from a garden sprayer, a tirepressure gauge, vinyl tubing, rubber, a brassfitting, a brass 'T', nuts, and bolts.

Click here for more details on: One-Person Brake Bleeder

of 104

http://www.homemadetools.net/forum/portable-one-person-pressure-brake-bleeder-19718?utm_source=ebook&utm_campaign=bestautomotivetools#post27831




Brake Booster Rod Measuring Toolby: dtech

Homemade brake booster rod measuring toolfashioned from steel.

Click here for more details on: Brake Booster Rod Measuring Tool

of 104

http://www.homemadetools.net/forum/automotive-booster-rod-measuring-tool-27348?utm_source=ebook&utm_campaign=bestautomotivetools#post36894




Brake Turning Toolby: darkoford

Homemade brake turning tool steel stock andthreaded rod.

Click here for more details on: Brake Turning Tool

of 104

http://www.homemadetools.net/forum/brake-lathe-restoration-62425?utm_source=ebook&utm_campaign=bestautomotivetools#post96288




Transmission Fillerby: Dave W

Homemade long-reach transmission fillerfabricated from a 20" length of stainless steelsupply hose, a 1/2" pipe nipple, and a funnel.

Click here for more details on: Transmission Filler

of 104

http://www.homemadetools.net/forum/transmission-filler-8?utm_source=ebook&utm_campaign=bestautomotivetools#post11




Transfer Box Jack Adapterby: naughtyboy

Homemade transfer box jack adaptorintended to facilitate lifting operations duringwork on Land Rover and Range Rovertransmissions. Adaptor was fabricated fromsteel and attached to a floor jack's liftingsaddle.

Click here for more details on: Transfer Box Jack Adapter

of 104

http://www.homemadetools.net/forum/t-box-jack-102?utm_source=ebook&utm_campaign=bestautomotivetools#post264




Transmission Hoistby: chief36chevy

Homemade transmission hoist constructedfrom angle iron and a winch.

Click here for more details on: Transmission Hoist

of 104

http://www.homemadetools.net/forum/engine-hoist-winch-%3D-43493?utm_source=ebook&utm_campaign=bestautomotivetools#post62690




Transmission Tailshaft Plugby: nortin

Homemade transmission tailshaft plugconstructed from a kitchen sink drain pipe,plastic, and sealant.

Click here for more details on: Transmission Tailshaft Plug

of 104

http://www.homemadetools.net/forum/transmission-leak-stopper-49111?utm_source=ebook&utm_campaign=bestautomotivetools#post70145




Heavy Duty Transmission Jackby: Frank S

Homemade heavy duty transmission jackconstructed from 4x4 square tubing, 1"sprinkler pipe, casters, swivels, CRS barstock, homemade collars, and a chromedcylinder.

Click here for more details on: Heavy Duty Transmission Jack

of 104

http://www.homemadetools.net/forum/heavy-duty-transmission-jack-68222?utm_source=ebook&utm_campaign=bestautomotivetools#post112831




Groove Cutting Toolby: Frank S

Homemade groove cutting tool constructedfrom a surplus hand tool ground with apointed edge. Used for cutting a groovearound the mating surfaces of a flywheelhousing.

Click here for more details on: Groove Cutting Tool

of 104

http://www.homemadetools.net/forum/grove-cutting-tool-68410?utm_source=ebook&utm_campaign=bestautomotivetools#post113566




Radius Platesby: Spannerdude

Homemade radius plates constructed fromMDF and steel plate. Intended to facilitate theprocess of accurately tracking the wheels of aFiat 500.

Click here for more details on: Radius Plates

of 104

http://www.homemadetools.net/forum/radius-plates-1866?utm_source=ebook&utm_campaign=bestautomotivetools#post2534




Ball Joint Fixtureby: astroracer

Homemade ball joint fixture constructed fromsteel plate.

Click here for more details on: Ball Joint Fixture

of 104

http://www.homemadetools.net/forum/shop-fabbed-ball-joint-fixture-lower-control-arm-fabrication-36871?utm_source=ebook&utm_campaign=bestautomotivetools#post51025




Axle Tube Bleeder Housingby: DLW

Homemade axle tube bleeder housingconstructed from aluminum, fittings, hose, &O-rings.

Click here for more details on: Axle Tube Bleeder Housing

of 104

http://www.homemadetools.net/forum/hello-my-name-dave-i-am-addicted-all-things-mechanical-39230?utm_source=ebook&utm_campaign=bestautomotivetools#post54790




Front Shock Mock Up Toolby: astroracer

Homemade front shock mock up toolconstructed from flat bar stock, nuts, andbolts.

Click here for more details on: Front Shock Mock Up Tool

of 104

http://www.homemadetools.net/forum/front-shock-mock-up-tool-56613?utm_source=ebook&utm_campaign=bestautomotivetools#post84021




Strut Compressor Standby: dtech

Homemade strut compressor standconstructed from a surplus engine stand.

Click here for more details on: Strut Compressor Stand

of 104

http://www.homemadetools.net/forum/strut-compressor-stand-engine-stand-56662?utm_source=ebook&utm_campaign=bestautomotivetools#post84116




Valve Spring Compressorby: TacoSalad

Homemade valve spring compressorconstructed from an oxygen sensor socketand scrap steel. Intended for a Volvo B230engine.

Click here for more details on: Valve Spring Compressor

of 104

http://www.homemadetools.net/forum/valve-spring-compressor-16366?utm_source=ebook&utm_campaign=bestautomotivetools#post22018




Carburetor Standby: astroracer

Homemade carburetor stand constructed froma surplus carburetor spacer, bolts, and nuts.

Click here for more details on: Carburetor Stand

of 104

http://www.homemadetools.net/forum/holley-carb-work-stand-56612?utm_source=ebook&utm_campaign=bestautomotivetools#post84020




Oil Filter Cutterby: funflyer

Homemade oil filter cutter constructed fromaluminum stock, threaded rod, skateboardwheel bearings, and a tubing cutter blade.

Click here for more details on: Oil Filter Cutter

of 104

http://www.homemadetools.net/forum/oil-filter-cutter-43239?utm_source=ebook&utm_campaign=bestautomotivetools#post62332




Oil Filter Wrench Modificationby: mattthemuppet

Homemade oil filter wrench modificationconstructed from a surplus measuring jug andsealant.

Click here for more details on: Oil Filter Wrench Modification

of 104

http://www.homemadetools.net/forum/simple-oil-filter-wrench-cup-60525?utm_source=ebook&utm_campaign=bestautomotivetools#post91548




Bead Breakerby: TERBPA

Homemade bead breaker fashioned bywelding a short length of I-beam to a piece ofheavy angle iron. Intended to facilitate tirechanging operations for a '41 Dodge truck'ssplit rims.

Click here for more details on: Bead Breaker

of 104

http://www.homemadetools.net/forum/hey-o-down-southern-border-4818?utm_source=ebook&utm_campaign=bestautomotivetools#post5846




Bead Breaker Attachmentby: aametalmaster

Homemade bead breaker attachment for ashop press fabricated from 3/8" flat steelstock and a short section of pipe.

Click here for more details on: Bead Breaker Attachment

of 104

http://www.homemadetools.net/forum/shop-press-1285?utm_source=ebook&utm_campaign=bestautomotivetools#post4537




Valve Cap Toolby: Rick Sparber

Homemade valve cap tool constructed fromflexible tubing and a rod.

Click here for more details on: Valve Cap Tool

of 104

http://www.homemadetools.net/forum/tire-valve-stem-cap-tool-48640?utm_source=ebook&utm_campaign=bestautomotivetools#post69420




Steering Knuckle Fixtureby: astroracer

Homemade steering knuckle fixtureconstructed from steel plate and round barstock.

Click here for more details on: Steering Knuckle Fixture

of 104

http://www.homemadetools.net/forum/astro-van-steering-knuckle-mods-making-another-jig-fixture-36999?utm_source=ebook&utm_campaign=bestautomotivetools#post51250




Honda Steering Rack Adjusterby: handycrowd

Homemade Honda steering rack adjusterconstructed from a 40mm wrench and awasher.

Click here for more details on: Honda Steering Rack Adjuster

of 104

http://www.homemadetools.net/forum/honda-steering-rack-slipper-adjustment-tool-63889?utm_source=ebook&utm_campaign=bestautomotivetools#post100247




Car Battery Testerby: Boyntonstu

Homemade car battery tester constructedfrom an electrical multimeter and a length of#8 solid copper wire.

Click here for more details on: Car Battery Tester

of 104

http://www.homemadetools.net/forum/car-battery-tester-measure-amps-alternator-draw-measure-dc-amps-27988?utm_source=ebook&utm_campaign=bestautomotivetools#post38023




Laser Wheel Alignment Gaugesby: Spannerdude

Homemade laser wheel alignment gaugesfabricated from 1" square steel tube andutilizing inexpensive air gun sights mounted toadjustable fittings. Capable of accommodatinga range of rim sizes and vehicle widths.

Click here for more details on: Laser Wheel Alignment Gauges

of 104

http://www.homemadetools.net/forum/laser-wheel-alignment-gauges-1867?utm_source=ebook&utm_campaign=bestautomotivetools#post2535




Tapered Axle Pullerby: nonhog

Homemade tapered axle puller adapted froma surplus Toyota MR2 hub and utilizing asection of black iron pipe as the tool's body.

Click here for more details on: Tapered Axle Puller

of 104

http://www.homemadetools.net/forum/tapered-axle-puller-972?utm_source=ebook&utm_campaign=bestautomotivetools#post1417




Differential Casing Separatorby: TexBuxer

Homemade differential casing separatorconstructed from tubing, flat bar stock,threaded rod, nuts, and a dial indicator.

Click here for more details on: Differential Casing Separator

of 104

http://www.homemadetools.net/forum/differential-separator-30868?utm_source=ebook&utm_campaign=bestautomotivetools#post42577




Single Hole Spanner Wrenchby: Frank S

Homemade single hole spanner wrenchconstructed from flat bar stock. Used to holdthe flange when tightening axle nuts.

Click here for more details on: Single Hole Spanner Wrench

of 104

http://www.homemadetools.net/forum/single-hole-adjustable-spanner-wrench-68792?utm_source=ebook&utm_campaign=bestautomotivetools#post114519




Panel Jogglerby: richthemechanic

Homemade panel joggler adapted from a doorskin edging tool. Utilizes a reversible nylonblock and a sturdier jaw fabricated from steel.

Click here for more details on: Panel Joggler

of 104

http://www.homemadetools.net/forum/panel-joggler-5510?utm_source=ebook&utm_campaign=bestautomotivetools#post6629




Dollyby: nonhog

Homemade dolly adapted from aninexpensive 3-pound dumbbell. Smoothedand polished with successive grits untilacceptable for use. Capable of being mountedin a vise.

Click here for more details on: Dolly

of 104

http://www.homemadetools.net/forum/cheap-dolly-962?utm_source=ebook&utm_campaign=bestautomotivetools#post1401




Hammer Forming Toolby: astroracer

Homemade hammer forming tool constructedfrom a block of steel.

Click here for more details on: Hammer Forming Tool

of 104

http://www.homemadetools.net/forum/another-hammer-forming-tool-40079?utm_source=ebook&utm_campaign=bestautomotivetools#post56554




Cross Member Jigby: Frank S

Homemade crossmember jig constructedfrom steel plate, C-channel, and squaretubing.

Click here for more details on: Cross Member Jig

of 104

http://www.homemadetools.net/forum/49-chevy-cross-member-jig-40391?utm_source=ebook&utm_campaign=bestautomotivetools#post57286




Towbar Conversionby: kess

Homemade towbar conversion constructedfrom flat bar stock, nuts, bolts, and washers.

Click here for more details on: Towbar Conversion

of 104

http://www.homemadetools.net/forum/convert-towbar-fit-peugeot-206-a-47050?utm_source=ebook&utm_campaign=bestautomotivetools#post67329




Wheel Well Lip Benderby: astroracer

Homemade wheel well lip bender constructedfrom steel plate.

Click here for more details on: Wheel Well Lip Bender

of 104

http://www.homemadetools.net/forum/easy-make-flange-wheel-well-lip-bender-54420?utm_source=ebook&utm_campaign=bestautomotivetools#post79921




Pickup Bumperby: Frank S

Homemade pickup bumper constructed fromsheetmetal. Contains compartments for safetyequipment and connectors.

Click here for more details on: Pickup Bumper

of 104

http://www.homemadetools.net/forum/front-bumper-masda-pickup-68722?utm_source=ebook&utm_campaign=bestautomotivetools#post114337




Pickup Bumperby: astroracer

Homemade pickup bumper constructed froma surplus bumper, sheetmetal, and tubing.

Click here for more details on: Pickup Bumper

of 104

http://www.homemadetools.net/forum/bumper-build-95-gmc-pickup-68727?utm_source=ebook&utm_campaign=bestautomotivetools#post114346




Frame Horn Toolby: Frank S

Homemade frame horn tool constructed fromrectangular tubing.

Click here for more details on: Frame Horn Tool

of 104

http://www.homemadetools.net/forum/another-frame-horn-tool-69559?utm_source=ebook&utm_campaign=bestautomotivetools#post117555




Tire Bead Spreaderby: Frank S

Homemade tire bead spreader constructedfrom surplus lumber.

Click here for more details on: Tire Bead Spreader

of 104

http://www.homemadetools.net/forum/simple-quick-tire-bead-spreaders-64268?utm_source=ebook&utm_campaign=bestautomotivetools#post101160




Backhoe Bucket Quick Disconnectby: Frank S

Homemade backhoe bucket quick disconnectconstructed from 1" steel plate.

Click here for more details on: Backhoe Bucket Quick Disconnect

of 104

http://www.homemadetools.net/forum/backhoe-bucket-quick-disconnect-50424?utm_source=ebook&utm_campaign=bestautomotivetools#post72458




Fork Carriageby: Frank S

Homemade fork carriage constructed fromsteel plate, angle iron, and homemadebushings.

Click here for more details on: Fork Carriage

of 104

http://www.homemadetools.net/forum/fork-carriage-my-ford-755-a-55970-3?utm_source=ebook&utm_campaign=bestautomotivetools#post84156




More top homemade tools from HomemadeTools.net

For more homemade automotive tools from HomemadeTools.net, click the

link below:

Click here for morehomemade automotive tools

For more of the best homemade tools from HomemadeTools.net, click the

link below:

Click here for more of thebest homemade tools

of 104



http://www.homemadetools.net/best?utm_source=ebook&utm_campaign=bestautomotivetools

http://www.homemadetools.net/best?utm_source=ebook&utm_campaign=bestautomotivetools

page 1 of 104...page 4 of 104 101 best homemade automotive tools from homemadetools.net vehicle vise...

Documents