page 1 assembled trap bolt trap jars screens dive weights (6kg) rope threading 8-mm rope trap cones...
TRANSCRIPT
Page 1
Assembled trap
Bolt
Bolt
Trap jars
Screens
Dive weights (6kg)
Rope threading
8-mm rope
Trap cones
13mm sockets
13mm sockets
Cut cable ties to remove
Unscrew to removeand screw on lid
A 125 mm Troll float is used as a subsurface float
Lift by the rope only and keep vertical
Rest the trap on the side of the boat on the bottom plate
Puncture the parcel-tape patch to spill excess water
If sediment above the patch, catch the water and sediment in the 5-litre jug and transfer to a 2-litre bottle and label
The bottom trap will have more sediment than the top !
Traps @ 1, 2, 6, and 7 are likely to have large amounts of sediment
There are 2 traps at the top and two at the bottom = 4 traps per line
= total of 40 traps
Sediment trap River delta sediment
Sediment Coring Map
General locations of proposed sediment traps and delta samples
1
2
3
4
56
7
8
9
10
Trap coordinates Depth1 35o 19.085’ 3.8 m
174o 07.528’
2 35o 18.481’ 7.3 m174o 10.308’
3 35o 15.834’ 8.0 m174o 06.096’
4 35o 13.719’ 22.0 m174o 06.262’
5 35o 11.311’ 44.0 m 174o 08.605’
6 35o 11.960’ 9.0 m174o 02.051’
7 35o 10.896’ 9.0 m174o 02.567’
8 35o 11.274’ 29.5 m174o 06.235’
9 35o 15.035’ 17.0 m174o 10.063’
10 35o 14.290’ 14.5 m174o 12.530’
Field trip 23-27 November 2009
LIN09305 / CSI
15A
16A
17A
19A
18A
Sediment trap River delta sediment
Sediment Coring Map
General locations of proposed sediment traps and delta samples
1
2
3
4
56
7
8
9
10
Trap coordinates Depth1 35o 19.085’ 3.8 m
174o 07.528’
2 35o 18.481’ 7.3 m174o 10.308’
3 35o 15.834’ 8.0 m174o 06.096’
4 35o 13.719’ 22.0 m174o 06.262’
5 35o 11.311’ 44.0 m 174o 08.605’
6 35o 11.960’ 9.0 m174o 02.051’
7 35o 10.896’ 9.0 m174o 02.567’
8 35o 11.274’ 29.5 m174o 06.235’
9 35o 15.035’ 17.0 m174o 10.063’
10 35o 14.290’ 14.5 m174o 12.530’
Field trip 23-27 November 2009
LIN09305 / CSI
15A
16A
17A
19A
18A
South Pacific Ocean. New Zealand. North Island – 1:502,000