paco vl 40127
DESCRIPTION
pump inlineTRANSCRIPT
11/19/12 Grundfos Quotation System 12.0.0.22
1/1grundfos.intelliquip.com/IEQ_HydSel/HydSel_JSP/intelliquip/main.jsp?selectedURL=/performancedatash…
Home | New Item | Documents | Session Preferences | Feedback | Help | Return to Website
Selection Criteria Selection Results Configuration
Conditions of Service Search Results Configurator
Product Lines Performance Curve Construction Datasheet
Size List Performance Datasheet Dimensional Drawing
Life Cycle Cost
Units Curve Preferences Print Show Flow #2 Multi-Speed Curves
Performance Datasheet Additional Data Multiple Conditions
Header Information
Performance Details
PACO Model : 40127 VL
Stages : 1
Operating Conditions
Flow , rated 300.0 USgpm
Differential head / pressure, rated (requested) 127.0 ft
Differential head / pressure, rated (actual) : 126.9 ft
Suction pressure, rated / max 0.00 / 0.00 psi.g
NPSH available, rated Ample ft
Frequency 60 Hz
Performance
Speed criteria Synchronous Variable
Speed, rated set @ 1,760 rpm
Impeller diameter, rated set @ 11.11 in
Impeller diameter, maximum : 12.10 in
Impeller diameter, minimum : 9.50 in
Eff iciency : 70.94 %
NPSH required / margin required : 9.88 / 0.00 ft
- : -
MCSF : 116.0 USgpm
Head, maximum, rated diameter : 130.3 ft
Head rise to shutoff : 2.59 %
Flow , best eff. point (BEP) : 512.1 USgpm
Flow ratio (rated / BEP) : 58.58 %
Diameter ratio (rated / max) : 91.82 %
Cutw ater ratio (rated / cutw ater) : 86.33 %
Head ratio (rated dia / max dia) : 83.50 %
Cq/Ch/Ce ANSI/HI 9.6.7-2010 : 1.00 / 1.00 / 1.00
Selection status : Acceptable
Based on curve number
Liquid type
Additional liquid description
Solids diameter, max
Solids concentration, by volume
Temperature, max
Fluid density, rated / max
Viscosity, rated
Vapor pressure, rated
Material requested
Material selected
Maximum w orking pressure
Maximum allow able w orking pressure
Maximum allow able suction pressure
Hydrostatic test pressure
Motor sizing specif ication
Margin over specif ication
Service factor
Pow er, hydraulic
Based on duty point (rated pow er)
Non-overloading (max pow er)
Pow er reserve (rated / max / sizing spec)
Nameplate motor rating
Performance Curve
Curve Comment
Create/edit curve comment
©2000-2012