pack...pack 12 stage 46 the electronic control unit stage 47 connecting the wires and testing the...

1212packpack

Pack 12

Stage 46

The electronic control unitStage 47

Connecting the wires and testing the lightsStage 48

Attaching the wires to the chassisStage 49

Installing the gear leverStage 50

Assembling the fire extinguisher

Editorial by: Milanoedit srl, milanoedit.com Translation by: TperTradurre

Picture credits: NBCUniversal Archive

©️ 2019 Universal City Studios LLC. Fast & Furious and all related marks and characters are trademarks and copyrights of Universal Studios.All Rights Reserved.

Dodge, HEMI and related logos, vehicle model names and trade dress are trademarks of FCA US LLC and used under license by Premium and Collectibles Trading Co. Ltd. ©2019 FCA US LLC.

©️ 2019 Editorial Planeta DeAgostini S.A.U. Todos los derechos reservados.

©️ 2019 De Agostini Publishing Italia S.p.A. Tutti i diritti riservati.

Warning: Not suitable for children under the age of 14.

This product is not a toy and is not designed or intended for use in play.

Items may vary from those shown.

STAGESTAGE

181

These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience. Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.

46A

46D

46B

46C

DM

Publi

sher

Not

e: th

e app

eara

nce o

f the

par

ts sh

own

on th

ese p

ages

may

diff

er fr

om th

at of

the p

ieces

inclu

ded

in th

is pa

ck.

This

in n

o way

affe

cts t

he q

ualit

y or a

ssem

bly i

nstru

ction

s.

PIECES FOR THIS STAGE

In this assembly session you will attach the electronic control unit to your model car. The unit controls the lights and sound effects.

46A Electronic control unit46B Wiring and switch for sound effects of horn and engine46C Wiring and switch for the lights46D Dashboard lights with wiring

DM Screws 1.7×3x5 mm (x 5)*

* Some of the parts are spares.

ELECTRONIC CONTROL UNIT

THE ELECTRONIC THE ELECTRONIC CONTROL UNITCONTROL UNIT

4646

182

46A

30A

DM

46C

46B

46A

46D

1F

1G

1H

46.1 Insert the connector on the wiring for the sound effects 46B into socket 1F of the electronic control unit 46A; the connector on the wiring for the lights

46C into socket 1G; and the wiring of the dashboard lights 46D into socket 1H.

46.2 WIth the electronic control unit 46A facing the same way as in the illustration, put it on the four pins

located on the left side of the middle section of the chassis 30A. Secure with four type DM screws.

STAGE 46STAGE 46

183

43B

44A

*Batteries not included

44A

45B

46A

1E

1D

46.4 test the sound. Insert three AAA* batteries into the battery holder and switch on.

46.3 Insert the connector on the wire of the speaker 45B into socket 1E in the control unit. Then, connect the wire of the battery

holder to socket 1D.

STAGE 46STAGE 46

184

STAGE 46 FINAL RESULT

You have now attached the electronic control unit to the chassis, and connected the first set of wires.

46.5 Press the switch on the wiring for the sound effects 46B once. The speaker 45B should reproduce the sound of the horn. Press switch 46B again, and you should hear the sound of the engine. To stop the sound, press the switch again. Use the

switch on the battery holder 44A to turn the system off.

45B

46B

STAGE 46STAGE 46

STAGESTAGE

185


Publi

sher

Not

e: th

e app

eara

nce o

f the

par

ts sh

own

on th

ese p

ages

may

diff

er fr

om th

at of

the p

ieces

inclu

ded

in th

is pa

ck.

This

in n

o way

affe

cts t

he q

ualit

y or a

ssem

bly i

nstru

ction

s.


In this assembly session you will connect the wires of the brake light, headlights and rear lights to the control unit. You will then perform a simple test to check that the lights work properly.

CONNECTING THE CONNECTING THE WIRES AND TESTING WIRES AND TESTING THE LIGHTSTHE LIGHTS

47A Wiring and switch for the brake light47B Wiring for the LED headlights 47C Wiring for the LED rear lights

47D Type A wire grommet (x 3)47E Type B wire grommet (x 3)47F Stands for the chassis (x 4)

CM Screws 1.7×3 mm (x 14)*


ELECTRONIC CONTROL UNIT

4747

47A

47B

47C

47D

47E

CM

47F

186

47C

46A

47A

47B

1C

1A1B

44A

STAGE 47STAGE 47

47.2 noW, you are going to check if the lights work properly. Turn on the switch on the battery holder

44A.

47.1 ConneCt the connector on the wiring for the brake light 47A to socket 1B in the electronic control unit 46A; the connector of the wiring for the headlights 47B to socket 1A, and that of the rear lights 47C to socket 1C.

187

47C

47B

46D

46C

47B

47A

STAGE 47STAGE 47

47.3 Press the switch on the wiring 46C to turn on the rear lights 47C, the headlights 47B, and the dashboard lights 46D.

47.4 Press the switch on the wiring for the brake light 47A to increase the intensity of the rear lights 47C

(or to switch them on if the switch on the lights 46C is turned off).

188

STAGE 47STAGE 47


You have now finished wiring the lights of your model car, and have checked that they work.

47.5 onCe you have finished testing the model car’s electronic functions, turn off the switch on the battery holder 44A and remove the battery holder cover 43B

and the three AAA batteries. 43B

44A

A USEFUL TIPAt the end of this session, put the chassis on the supplied stands to prevent the tyres from deforming.

STAGESTAGE

189


48A

48B

Publi

sher

Not

e: th

e app

eara

nce o

f the

par

ts sh

own

on th

ese p

ages

may

diff

er fr

om th

at of

the p

ieces

inclu

ded

in th

is pa

ck.

This

in n

o way

affe

cts t

he q

ualit

y or a

ssem

bly i

nstru

ction

s.


In this assembly session you will attach the wires to the chassis. You will also attach four hooks to the floor pan. Follow our instructions carefully, using the illustrations to help you.

ATTACHING THE ATTACHING THE WIRES TO THE CHASSISWIRES TO THE CHASSIS

48A Floor pan48B Hooks (x 4)


FLOOR PAN

4848

190

31A

47D

30A

47D

47D

CMCM

CM

30A

31A

47C

44A47C

48.1 Pass the wire for the rear lights 47C between the three pairs of linchpins located on the middle and rear sections of the chassis (30A and 31A). Also, insert the wire for the battery holder 44A between the first two pairs of linchpins, those on the middle section of the chassis.

48.2 Get the wire grommets and screws that came with session 47. Slide the three type A wire

grommets 47D onto the pairs of linchpins on the middle and rear sections of the chassis (30A and 31A). Secure each wire grommet with two type CM screws.

STAGE 48STAGE 48

191

21A

47E47E47E

CM CMCM

21A47A

46B

46C

46D

47B

48.4 to attaCh this group of wires to the chassis, slide the three type B wire grommets 47E onto the

pairs of linchpins on the front platform 21A. Secure each wire grommet with two type CM screws.

48.3 GrouP together the following wires between the pairs of linchpins on the front platform 21A: those of the switch for the horn and engine sound

effects 46B; those of the front headlights 47B; those of the brake light switch 47A; those of the lights 46C; and, finally, those of the dashboard lights 46D.

STAGE 48STAGE 48

192

48B

48A


48A

48B

You have now attached the wiring for the electrical system to the chassis, and the four hooks to the floor pan.

48.5 Insert two of the hooks 48B into the two holes on the floor pan 48A, next to the central tunnel.

48.6 Insert the remaining two hooks 48B into the holes on the other side of

the tunnel.

STAGE 48STAGE 48

STAGESTAGE

193


49A 49B

49E

49C 49D

AP

Publi

sher

Not

e: th

e app

eara

nce o

f the

par

ts sh

own

on th

ese p

ages

may

diff

er fr

om th

at of

the p

ieces

inclu

ded

in th

is pa

ck.

This

in n

o way

affe

cts t

he q

ualit

y or a

ssem

bly i

nstru

ction

s.


In this assembly session you will connect the wires of the brake light, headlights, and rear lights to the electronic control unit. You will then perform a simple test to check that the lights work properly.

INSTALLING THE INSTALLING THE GEAR LEVERGEAR LEVER

49A Gear lever49B Gear knob49C Shift rail49D Centre console

49E Middle section of the transmission tunnelAP Screws 1.7×4 mm (x 8)*


GEAR LEVER

4949

194

49C

49D

AP

49A

49D

49C

49B

STAGE 49STAGE 49

49.1 PlaCe the shift rail 49C on the centre console 49D, and join the two components together using two type AP screws.

49.2 Insert the thinner end of the gear lever 49A into the corresponding housing in the centre console 49D, ensuring that the ball at the opposite end fits

into its housing. Then put the gear knob 49B onto the gear lever.

195

49.4 JoIn the floor pan and the middle section of the transmission tunnel 49E, by inserting the two tabs into the corresponding slots.

49.3 attaCh the piece you have just assembled to the middle of the floor pan 48A, ensuring it faces the same way as in the illustration. Secure

the centre console 49D to the floor pan with two type AP screws.

49D

48A

AP

48A

49E

STAGE 49STAGE 49

196

49.5 turn the floor pan over and attach it to the middle section of the transmission tunnel 49E using two type AP screws.

STAGE 49 FINAL RESULT You have now installed the gear lever and the middle section of the transmission tunnel on the floor pan.

48A

49E

AP

AP

STAGE 49STAGE 49

STAGESTAGE

197


50A

50D 50E

50B50C

AP

Publi

sher

Not

e: th

e app

eara

nce o

f the

par

ts sh

own

on th

ese p

ages

may

diff

er fr

om th

at of

the p

ieces

inclu

ded

in th

is pa

ck.

This

in n

o way

affe

cts t

he q

ualit

y or a

ssem

bly i

nstru

ction

s.


In this assembly session you will assemble the fire extinguisher and attach it to the floor pan. Follow our instructions very carefully, using the illustrations to help you.

ASSEMBLING THE ASSEMBLING THE FIRE EXTINGUISHER FIRE EXTINGUISHER

50A Fire extinguisher stand50B Fire extinguisher (front)50C Fire extinguisher (back)50D Pressure gauge

50E Brackets (x 2)AP Screws 1.7×4 mm (x 10)*


sERbAtOiO E ALtOPARLANtEFiRE EXtiNGUisHER

5050

198

50D

50B

50B

50C

AP

50.1 JoIn the front and back of the fire extinguisher 50B and 50C together. Secure them with two type AP screws.

50.2 Press the pressure gauge 50D into the hole in the front of the fire extinguisher 50B.

STAGE 50STAGE 50

199

50A

48A

49E

50C

50A

48A

AP

50.3 Get the floor pan 48A you were working on at the end of the last assembly session. Attach the fire extinguisher stand 50A to the middle section of the transmission tunnel 49E, ensuring it faces the same way as in the illustration.

50.4 Mount the fire extinguisher on the base 50A, so that the two linchpins on the back of the fire extinguisher 50C fit

into the corresponding holes. Secure the components with two type AP screws, inserting them from underneath the floor pan 48A.

STAGE 50STAGE 50

200

AP AP

50E50E

48A

50.5 alIGn the two brackets 50E with the corresponding holes in the right side of the floor pan 48A, next to the hooks that you

mounted in assembly session 47. Secure each of the two brackets with two type AP screws.

STAGE 50 FINAL RESULT You have now attached the two brackets and the fire extinguisher and its base to the floor pan.

STAGE 50STAGE 50

pack...pack 12 stage 46 the electronic control unit stage 47 connecting the wires and testing the...

Documents