p3 magnetic blow out - paramount.net.in · magnetic blow out two no magnetic blow out 10a @ 110 vdc...
TRANSCRIPT
P3 RELAY WITH
MAGNETIC BLOW OUT Two NO Magnetic Blow Out
10A @ 110 VDC 1
Contat Specifications - Single Contacts
Materials : Standard AgCuNi
24
(-) 3 magnet (+) 6 2 Contact Configuration 2 NO
A1 (+)
Nominal Switching Capacity 220 VDC 5A DC1
110 VDC 10A DC1
A2 Electric Life Expectancy 110 VDC 10A DC1
7 apprx. 100,000 operations
(360 operations /h)
1 8 Max. Inrush Current 30A for 20 ms
11 21
Switching Current Range 50mA to 10A
Max. Switching Current 20A(Max, 4S at Duty cycle <10%)
Switching Power Range 1 KW for DC
14
Switching Power Range 1 KW for DC
0.3 VA (W) to 2500 VA
Contact Resistance 20m Ω
Specifications
Mechanical Life Expectancy > 108 operations
Must Pull in Voltage (AC & DC) 80% of the Rated voltage
Must Drop Out Voltage (DC) 10% of the Rated voltage
Mechanical Switching Frequency 20 Hz
Pull-in-time 12 ms at DC / 3-10 ms at AC
Release Time 3.5 ms at DC / 2-15 ms at AC
Bounce time normally
Open Contact 3.5 ms at DC / 3-6 ms at AC
Bounce Time break contact 9ms at DC / 6-11 ms at AC
Shock Resistance AK : > 10g
Vibration Resistance 10-55 Hz, AK : 10g, RK: 3g
Test Voltage , coil / contact 5000 Veff
Test Voltage, but Adjacent contacts 2000 Veff
Test voltage, open contact 1500 Veff
Insulation Resistance 1000 M Ω Min. @ 500VDC
Weight app. 80 g
Mounting Position anyMounting Position any
Ambient Temperature - 40° C to + 70° C
Protection Standard IP 40