p24al & p34 al manual

Download p24al & p34 Al Manual

Post on 27-Oct-2015

183 views

Category:

Documents

3 download

Embed Size (px)

DESCRIPTION

Manual de la maquina de hielo vogt p24

TRANSCRIPT

  • P-24AL &

    P-34AL TUBE-ICE MACHINE

    Service Manual $5000

    12/12/07

  • 12/12/07

    NOTICE

    This manual is the property of the owner of this particular Tube-Ice machine. Model #____________________ Serial #____________________. It is to be left on the premises with this machine at all times. After start-up, it should be stored in a safe place where it can be readily available when needed for future reference in maintaining troubleshooting or servicing. Failure to comply with this notice will result in unnecessary inconvenience and possible additional expenses. This manual is intended as an informational tool for the installation, operation, maintenance, troubleshooting, and servicing of this equipment. If an existing situation calls for additional information not found herein, we suggest that you contact your distributor first. If further assistance or information is needed, please feel free to contact the factory at 502-635-3000 or FAX at 502-635-3024 or 502-634-0479. IMPORTANT: The Warranty Registration/Start-Up Report found in the front of this manual is to be completed and returned to the factory promptly after the official start-up. Please return to: Tube Ice, LLC 1000 W. Ormsby, Suite 19 Louisville, KY 40210

    Att. Tube-Ice Service Department

  • Vogt Tube-Ice Machine MID & LARGE MACHINE WARRANTY REGISTRATION/START-UP REPORT

    MUST COMPLETE AND RETURN TO INITIATE WARRANTY Machine Model No. ________________________________ Serial No. ____________________________________________ Installed at: ____________________________________________________________( )_______________________________________ Company Name Phone _______________________________________________________________________________________________________ Address City State Zip ______________________________________________________________________________________________________ Installed by: ___________________________________________________________( )________________________/____/________ Company Name Phone Date _______________________________________________________________________________________________________ Address City State Zip Describe any damage to machine/repairs made: _____________________________________________________________________________ __________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________ Start up by: ___________________________________________________________( )________________________/____/_________ Company Name Phone Date _______________________________________________________________________________________________________ Address Name of person starting up machine: ____________________________________________________________________________________

    PRE START-UP CHECK CHECK

    Service Manual on hand Machine room suitable 50F minimum, 110F maximum Proper power supply, actual voltage _______________, _________________, _________________ (machine not running) Compressor crankcase heater on 12 hour minimum Necessary hand valves opened as required Solenoid valve stems in auto position System leak checked/tight Auxiliary equipment overloads wired into control circuit Compressor oil level _______ (1/4 glass min.) All water distributors in place (visually inspected) Water supply and drain lines installed and connected properly Compressor, pump, cutter and other motor direction of rotation correct Make-up water float valve adjusted properly Hour meter in control panel connected

    OPERATION CHECK Machine charged with refrigerant lbs.______________ Actual voltage ____________ , _______________, ________________(machine running) Ambient temp. _____ F Fan cycles On _____ Off _____ Tower water in _____F out ______ F Comp motor RLA _____________, _____________, _____________, Actual _____________, _____________, _____________, Pump RLA _____________, _____________, _____________, Actual _____________, _____________, _____________ Cutter motor RLA _____________, _____________, _____________, Actual _____________, _____________, _____________ Suction pressure end of freezing _______, end of harvest _______ Discharge pressure end of freezing ___________, end of harvest __________ Evaporator/suction line frost _____________________________ Receiver liquid level operating ___________________

    Test Cycle

    Water Temp

    FreezeTime

    Min/Sec

    Harvest Time

    Min/Sec

    First Ice Out

    Min/Sec

    All Ice Out

    Min/Sec

    Avg. Hole

    Size

    Ice Lb. Per

    Harvest

    Ice Lb. Per

    Day #1 #2 #3 #4

    Note: Ice lb. per day can be found by: ice lb. per harvest x 1440 (freeze time + harvest time) The machine operated satisfactorily for ___ continuous hours. Date _______________________________________ Comments__________________________________________________________________________________________________________ __________________________________________________________________________________________________________________ Installer signature ____________________________________________ End user signature _________________________________ Please return to: Tube Ice LLC, 1000 W. Ormsby, Suite #19, Louisville, KY 40210

  • VOGTTUBE-ICE MACHINES P24AL & P34AL Model

    Installation, Service Manual, and Parts Catalog #12A-4171L14

    Tube Ice, LLC 1000 W. Ormsby Avenue, Suite 19 Louisville, Kentucky, 40210 800-853-8648 502-635-3000 Fax: 502-634-0479

    12/12/07

  • P24AL & P34AL Service Manual

    TABLE OF CONTENTS

    12/12/07

    i

    TABLE OF CONTENTS

    Vogt TUBE-ICE MACHINES Model P24AL & P34AL

    Page No. 1. INTRODUCTION

    A Brief History Of Our Company .................................................................................................................................1-1

    Vogt Energy-Savings Tube-Ice Machines ..................................................................................................................1-1

    Preview .....................................................................................................................................................................1-1

    Important Safety Notice.................................................................................................................................................1-2

    Safety Symbols and What They Mean ..........................................................................................................................1-2

    Special Precautions To Be Observed When Charging Refrigeration Systems ..............................................................1-3

    Assembly Drawing Model P24AL Tube-IceMachine .................................................................................................1-4, 5, 6, 7

    Assembly Drawing Model P34AL Tube-IceMachine .................................................................................................1-8, 9, 10, 11

    2. RECEIPT OF YOUR TUBE-ICE MACHINE

    Inspection .....................................................................................................................................................................2-1

    Description of Machine .................................................................................................................................................2-1

    Safety Tags and Labels..................................................................................................................................................2-1

    Model designation for P-Series Ice Machine, Figure 2-1 ..............................................................................................2-2

    Storage (prior to installation and start-up) .....................................................................................................................2-2

    3. INSTALLING YOUR TUBE-ICE MACHINE

    Machine Room ..............................................................................................................................................................3-1

    Space Requirements.......................................................................................................................................................3-1

    Foundation 3-1

    Lifting Procedures .........................................................................................................................................................3-1

    P24AL Space Diagram, FIGURE 3-1............................................................................................................................3-2,3-3

    P24AL Foundation Layout, FIGURE 3-2......................................................................................................................3-4

    P34AL Space Diagram, FIGURE 3-3............................................................................................................................3-5, 3-6

    P34AL Foundation Layout, FIGURE 3-4......................................................................................................................3-7

    Lifting Procedure for P24A