oxyview ®. smart nasal cannula tm introducing oxyview ® oxyview ® is a safety device and the...
TRANSCRIPT
OxyviewOxyview®®
SMART Nasal CannulaTM
Introducing Oxyview®Oxyview® is a safety device and the world's first in-line oxygen flow-meter. The Oxyview® quickly turns your nasal cannula into a Smart Nasal Cannula that is capable to monitoring your oxygen flow, while at the same time assures proper equipment function. This is a low cost solution that provides an easy to read, real time accurate measurement of continuous oxygen flow.
A disposable high-quality latex-free soft-tip cannula with an In-Line Oxyview that is maintenance free. “Self Monitoring Advanced Respiratory Technology” offers the patient the same piece of mind as Oxyview itself but in a single package.
Smart Nasal Cannula w/ Oxyview comes in sizes:
- Adult- Child- Infant
and in flows of 0-3 and 0-6 liters per minute
- Oxyview® Monitors real-time oxygen flow rate continuously !
- Oxyview® Assures proper function of your oxygen equipment including your regulator and tank !
- Oxyview® Provides additional safety and assurance to home oxygen patients who rely on oxygen therapy !
Revolutionary Oxyview Flow-Revolutionary Oxyview Flow-MeterMeter In-line with cannula, near patient
Works in any position (non-gravity dependent)
Patient Friendly and Durable
Lightweight
Inexpensive
More Accurate
Allows clinician to see oxygen flow during rehab and at home when a patient requires extenders to be attached to their nasal cannula for mobility
Patients using a low flow oxygen can quickly verify oxygen flow even though they do not always feel the gas flow.
Improves Oxygen Therapy
Oxyview® is a flow-meter.
Oxyview® mounts between the cannula and the tank “in-line”
Oxyview® delivers an easily read confirmation of actual flow
Oxyview® is the worlds first gravity independent flow-meter
Oxyview® is pneumatic and requires no batteries
Oxyview® can be used with oxygen devices including: Concentrators CPAPs Gas or liquid oxygen tanks And other oxygen equipment
Equipment can be placed at any distance from the patient since Oxyview® can be mounted close to the patient and “in-line” with the oxygen tubing.
Oxyview® can quickly verify to the patient/caregiver the correct oxygen flow, leaks or malfunction in the regulator or respiratory equipment.
Oxyview® is the new generation of pneumatic safety devices needed in
the growing oxygen therapy market.
What Is Oxyview®?
ISO 13485:2003 Certified
FDA Registered
DHS Licensed
CMS Medicare Approved
Reimbursement Code
Made in the USA
Adjustable over-the-ear style
Soft non-flared nasal top
One piece seamless design
Clear lightweight tubing
Crush-resistant tubing
Latex-free safe material construction
Oxyview® inline Flow-Meter
Life-Time Warranty
Conventional Flow-Meters
$52 $55$43 $895
Attach at the tank, distant from patient
Only works upright (gravity)
Bulky
Heavy
Expensive
Less Accurate
DifferencesOxyview® Conventional Flow-Meters Oxyview works in any direction, hands-free, using several
controlled forces to include oxygen flow, cyclonic inductionand Ingen's patented proprietary gravity-independentspring technology.
Conventional flow-meters work on two forces, oxygen flow and gravity.
Oxyview is 90%-100% accurate in any position regardlessof friction, moisture, vibration, temperature or position. Further, because of the accuracy, faulty regulators and other gauges can be identified.
Oxyview can be mounted near the cannula. This allowsfor exact flow rate measurement. It can help the patientwith problems associated with tubing obstruction.
Oxyview is strong and lightweight. The polycarbonate construction is rust resistant and stronger than steel or brass . The Oxyview can be installed in less than a minute without using any special wrench.
Conventional flow-meters are 20-30% inaccurate due toseveral reasons:
Friction… ball inside rubs against the walls. Moisture… water vapor will build-up inside. Vibration… sound and movement causes more friction. Temperature….inside material contracts & expands. Position…device must be perpendicular to the
earth.
Conventional Flow Meters are heavy and made of steel,glass and brass. They are subject to weather defectsand will crack. These devices can only be mounted onthe tank and requires special tools and knowledge.
Conventional flow meters are costly to purchase and replace. It is not a simple fix.
Home Care & Assisted LivingMore and more people are using oxygen therapy outside the hospital, permitting them to lead active, productive lives. People with asthma, emphysema, chronic bronchitis, occupational lung disease, lung cancer, cystic fibrosis, or congestive heart failure may use oxygen therapy at home.
Home oxygen therapy accounts for the largest share of Medicare payments for durable medical equipment.
Oxyview allows home care patients to live relatively “Worry Free” by providing peace-of-mind at minimal cost
Confirmation that DME equipment is functioning properly
Determine if flow is reduced by addition of humidifier bottle
Assurance that prescribed flow is being supplied through the cannula
Accurately read meter whether person is sitting, standing or sleeping.
Market Research Data 8-9% of Americans suffer from respiratory conditions such as: Asthma COPD Bronchitis The largest respiratory market is asthma.
Oxyview applies to the non-asthma markets which represents $4Billion today
and will increase to $6Billion by 2012. Despite the delivery apparatus, Oxyview can participate in the $4-$6 Billion market because reliable oxygen therapy is critical to all patients, caregiversand suppliers.
Opportunities for Oxyview in the home health care setting are driven by the
convergence of two trends: First, the segment of the US population aged 65 and over will double by 2015 Second, there is a concerted drive to move patients from the hospital to the
home care setting as quickly as possible.
Oxygen and respiratory manufacturers are competing aggressively for new
patients by introducing new, easier-to-use equipment.
An extensive study performed by In-Touch Life Sciences, LLC indicates that
Oxyview can be a successful medical device for the oxygen therapy market
place.
8-9% US Market
Market Projections
11,500,000 Americans have COPD, increasing 5-6% annually
Aging population increasing for the 55+ target audience
Smoking prevalence in men & women
800,000 severe COPD cases receive constant oxygen therapy
640,000 Oxygen Concentrators
140,000 Liquid Oxygen portable units
COPD is major cause of hospitalizations and 5th leading cause of death in the US
38,000,000 COPD sufferers in US, EC and Japan
Annual sales will increase as follows: Oxygen system sales will increase from $618M to $954M by 2012
Airway Mgt Device sales will increase from $599M to $815M by 2012
Nebulizer sales will increase from $600M to $879M by 2012
Ventilator sales will increase from $718M to $1B by 2012
Humidifier sales will increase from $763M to $1B by 2012
Pulse Oximeter sales will increase from $1.1B to $1.9B by 2012
PAP sales will increase from $218M to $299M by 2012
Overall, respiratory has had excellent growth of 17% per annum since 1997with projected growth of 10% per year for the next few years.
Other Markets for Oxyview Aviation (Commercial and Private)
Emergency Response (Ambulance and Paramedics)
Fire Department
Military and Department of Defense
Thank You!