CNC thermal cutting machine Vanad Proxima is highly efficient device which is to be used by really exacting customers in heavy operations. The machine works perfectly on large metal sheets and could be used with many oxy-fuel torches along with manual or fully automatic bevelling. Installed plasma carriages are ideal for usage of the latest and most efficient plasma sources. This machine can be also equipped with other additional devices.

technical solution

VanadPROXIMA

PROXIMAPLASMAOXY-FUEL

High performance•High accuracy•Accessories•

Vanad 2000 a. s.Riegrova 824, 582 82 Golčův Jeníkov, Czech RepublicPhone: +420 569 400 411, Fax: +420 569 400 444E-mail: vanad@vanad.com, www.vanad.com EUROPEAN UNION

EUROPEAN REGIONAL DEVELOPMENT FUNDINVESTMENT IN YOUR FUTURE

technical solution

VanadPROXIMA

PROXIMA

Double-sided longitudinal travel path•Linear bearing guiding in all axes•15” touch panel with technological keyboard for •easy controlExact control of the working area of the torch•Exact control of the ignition height of the torch•High accuracy of the positioning also after long •term operationThickness of cutted material up to 300 mm •Excellent dynamic properties of the machine•Elimination of any unproductive time during •operationHigh-performance, stable, user-friendly CNC •system

The machine can be delivered as a part of the complete delivery of the whole cutting workplace, i. e. including the plasma source and the consuming parts for plasma cutting or oxyacetylene cutting, the compressor for the air supply, including air treatment, filter equipment for the exhaustion of burnt gases originated during the thermal cutting of materials.

Double-sided portal drive•Longitudinal reinforced IPE beams•Flexible energy chains•Electronic regulation of the height of the torch•Electric ignition of the oxyacetylene torch•Transfer of cutting plans by USB or LAN •networkExact control of the heigh of the plasma torches•Pneumatic-electrical adjustment of the ignition •height of the plasma torch.Servo-control for cutt-off (piercing)•

Standard equipment

Marking unit – plasma marking•Marking unit – micro-punching•Marking unit – drawing needle•Drilling unit•Unit for contact control of the heigh of •the plasma torch – for cutting of thin sheetsOxyacetylene burner unit for burning of •direct bevels (V,X)CAD/CAM software for the preparation •of burning data

Optional equipment

VanadPROXIMA

The advantages of the

15 20 25 30 - up to 60

Working width A [mm] 1634 2134 2634 3134

then by 500

up to 6134

Working length B [m] ( 3, 4, 6, 8, 10, 12, 14, max 24 ) up to 24 000

Total width of the machine C [mm] 2990 3490 3990 4490 up to7490

Total length of the machine D [mm] according to working length of the machine up to 26 000

Loading width for metal sheet E [mm] 1600 2100 2600 3100 up to 6100

Loading length for metal sheet F [mm] according to working length of the machine up to 24 000

Maximum travel speed - [m/min.] 35,4

Maximum number of supports 1xPS, 1xSSP, 6xSSO, 2xAD, 3THR, 2x3THM

VanadPROXIMA

technical solution