oxy-fuel combustion for power generation and carbon dioxide (co2) capture || contributor contact...
TRANSCRIPT
123456789101234567892012345678930123456789401243X
© Woodhead Publishing Limited, 2011
Contributor contact details
ForewordJános M. BeérMassachusetts Institute of
Technology (MIT)Building 66, Room 30177 Massachusetts AvenueCambridgeMA 02139USAE-mail: [email protected]
Editor and Chapter 1L. ZhengCanmetENERGY, Natural Resources
Canada1 Haanel DriveOttawaOntarioCanadaK1A 1M1E-mail: [email protected]
Chapter 2D. Thimsen, J. Wheeldon and D.
Dillon*CoalFleet for Tomorrow ProgramElectric Power Research Institute
(EPRI)
3420 Hillview AvenuePalo Alto CA 94303USAE-mail: [email protected]
[email protected] [email protected]
Chapters 3 and 8Y. TanCanmetENERGY, Natural Resources
Canada1 Haanel DriveOttawaOntarioCanadaK1A 1M1E-mail: [email protected]
Chapter 4T. Wall* and R. StangerSchool of EngineeringThe University of NewcastleCallaghanNSW 2308AustraliaE-mail: [email protected]
(* = main contact)
xi
12345678 9101234567892012345678930123456789401243X
© Woodhead Publishing Limited, 2011
xii Contributor contact details
Chapter 5E. J. Anthony*CanmetENERGY, Natural Resources
Canada1 Haanel DriveOttawaOntarioCanadaK1A 1M1E-mail: [email protected]
H. HackFoster Wheeler North America
Corporation12 Peach Tree Hill RoadLivingstonNJ 07039USAE-mail: [email protected]
Chapter 6C. Shaddix*Sandia National Laboratories7011 East AvenueLivermoreCA 94550USAE-mail: [email protected]
A. MolinaSchool of Processes and EnergyFaculty of MinesNational University of ColombiaCar. 80 No. 65-223MedellínColombiaE-mail: [email protected]
Chapter 7J. Shan*Advanced Burner Product LineSIEMENS Environmental Systems
& ServicesSiemens Energy271 Route 202/206PO Box 410PluckeminNJ 07978USAE-mail: [email protected]
A. FrySenior EngineerReaction Engineering InternationalSuite 21077 West 200 SouthSalt Lake CityUT 84101USAE-mail: [email protected]
Chapter 9Y. Liu*, T. Wall and S. KhareSchool of EngineeringThe University of NewcastleCallaghanNSW 2308AustraliaE-mail: [email protected]
[email protected] [email protected]
R. GuptaDepartment of Chemical and
Materials EngineeringThe University of Alberta9107 – 116 StreetEdmonton, AB T6G 2V4CanadaE-mail: [email protected]
123456789101234567892012345678930123456789401243X
© Woodhead Publishing Limited, 2011
Contributor contact details xiii
Chapter 10N. Prosser and M. M. Shah*Praxair, Inc.175 East Park DriveTonawandaNY 14150USAE-mail: [email protected]
Chapter 11M. M. ShahPraxair, Inc.175 East Park DriveTonawandaNY 14150USAE-mail: [email protected]
Chapter 12H. Kobayashi* and L. E. BoolPraxair, Inc.175 East Park DriveTonawandaNY 14150USAE-mail: [email protected],
Chapter 13B. Clements*, R. Pomalis, L. Zheng
and T. HerageCanmetENERGY, Natural Resources
Canada1 Haanel DriveOttawaOntarioCanadaK1A 1M1E-mail: [email protected]
[email protected] [email protected] [email protected]
Chapter 14H. Jin* and X. ZhangInstitute of Engineering
ThermophysicsChinese Academy of SciencesP.O. Box 270611 Beisihuanxi RoadBeijing 100190People’s Republic of ChinaE-mail: [email protected]
Chapter 15N. Zhang* and W. HanInstitute of Engineering
ThermophysicsChinese Academy of SciencesP.O. Box 2706No. 11, West of North 4th Ring
RoadBeijing 100190People’s Republic of ChinaE-mail: [email protected]