owners club sales list - veloce spares · pdf fileowners club sales list veloce spares ltd....

Owners Club

SALES LIST

VELOCE SPARES LTD. The Old Chapel, Cheney End, Huncote, Leics. LE9 3AD

Website: velocespares.co.uk

This Parts & Price List is for use by members of THE VELOCETTE OWNERS CLUB

JUNE 2018 EDITION

The parts that appear in this list are either in stock or they are shown as “On order”

or “Hoping to be reordered soon”, based on the stock position at the time of

printing. Where a part is listed as “Hoping to reorder soon” it is because a source is

available, but either other parts are a greater priority for the currently available VSL

volunteers or the part is believed to be readily available from the remaining

Velocette parts suppliers as listed in the “Contacts” page of the Club’s website.

New issues expected monthly - see them first on velocespares.co.uk

Part number VSL376 Revised 24 May 2018 Price £2.00

The Velocette Owners Club set up “Veloce Spares Limited” to help its members to keep on riding. It is ONLY AVAILABLE TO MEMBERS, therefore ALL ORDERS MUST INCLUDE YOUR MEMBERSHIP NUMBER. Using the VSL Sales List The original Velocette part number is used to identify the part wherever possible. Parts should be ordered by this part number, and VSL's Sales List is mainly in part number sequence. In addition, many special parts have been made at the request of members. These all have a part number starting VSL and they are clearly identified in the Sales List. It is therefore essential that you have a copy of the original Velocette Spare Parts List publication for your motorcycle. A copy of the original Velocette publication not only enables you to identify the part, but also, for models since the mid-1950's, it shows you how to assemble the parts correctly. Reprints of most of the original Velocette Spare Parts List publications are available from VSL, as are copies of the original Velocette Service Manuals. In the VSL Sales List - Part Numbers VSL102/ are Service Manuals, Part Numbers VSL104/ are Spares Lists. Please note that the presence of a part in the VSL Sales List does not mean it is currently on the shelf. Although most items are in stock, parts are bought or made in batches and this can only be done when the minimum order quantity is justified. Use the appropriate Order Form Your order should be entered on the appropriate VSL Order Form Order by Part Number not just by Description This makes the biggest single contribution to efficient use of our volunteers’ time. Any other method wastes precious time as they try and work out what you want, and if they guess wrong then everyone’s time is wasted. PLEASE INCLUDE DETAILS OF MODEL AND YEAR Ordering by Post Simply post your order to Veloce Spares Ltd, The Old Chapel, Cheney End, Huncote, Leicester LE9 3AD UK Ordering by e-mail Orders sent by e-mail must not contain your full Credit or Debit card number. Instead, you need to register your Card Number with VSL before e-mailing subsequent orders. For information on how to register and how to download a Registration Form see the VSL Website (velocespares.co.uk). VSL will confirm your registration by e-mail including all the information you need to order by e-mail. Once you have received confirmation of your registration you can use your word processor to complete and send your order. Post and Pack Post and pack is extra on all orders. Postage & Packing will be charged at cost once the parts have been packed and weighed. Payments Credit and Debit cards are strongly preferred. Maestro, Visa Credit and Debit, and MasterCard Credit and Debit are accepted. In addition to your Card Number and Expiry Date and your Name & Address it is necessary for you to provide the three digit Security Code from your card. It is usually on the back, near to the signature block, and possibly near to a repeat of all or part of your card number. If you have to use a cheque the payee should be "Veloce Spares Ltd" (not VOC ). For Mail Orders the cheque must be “open” as in this example or unfortunately it will have to be returned. The cheque must be endorsed with "Not to exceed £xx" rather than a specific amount. The endorsement must be written vertically within the crossed, A/C payee area. VSL can then complete the amount once the postage costs or price changes have been taken into account.

Delivery Please remember that the Spares Company is run entirely by volunteers. Volunteers deal with all the orders received by post, fax or e-mail on one day each week (usually a Thursday) and so you should allow for this when anticipating delivery. The Old Chapel does not have any permanent staff, so communication by telephone is not normally possible. Sensible Use of Parts Please note that it is the user's responsibility to ensure that the part is suitable for the intended use. Many of our replacement parts are precision manufactured on 'modern' CNC machines, but in some circumstances may still require a degree of skill when being installed on our elderly machines to achieve a satisfactory fit. Veloce Spares Limited and the Velocette Owners' Club cannot accept liability for any loss, damage or claims occurring through the use of parts or information provided and (save for death or personal injury arising from negligence) all such liability is hereby excluded. Huncote Spares Open Days: - Opening time is 9:30 am to 3.00 pm with no break at lunchtime. Our over-the-counter spares service will be available to members on the following days: (non-members are very welcome and may join on the day)

Sunday 14 January 2018 Sunday 11 February 2018 Saturday 10 March 2018

Sunday 8 April 2018 Sunday 6 May 2018 Saturday 9 June 2018

Sunday 8 July 2018 Sunday 12 August 2018 Sunday 16 September 2018

Sunday 14 October 2018 Saturday 10 November 2018 Sunday 9 December 2018

Huncote has to be reached using some minor roads. Although it is surrounded by the M1, M69 and M6 it is not "on the motorway". Please note that junction 2 of the M69 does not have an exit for those traveling towards Leicester; instead leave at junction 1 and go down the A5 then up the B4114 until you see the signs to Croft. From junction 21 of the M1 first go back towards Leicester, then back on yourself at the next roundabout and onto another roundabout where you can at last come down the B4114 until Narborough where you will see signs for Huncote. THERE IS NO PARKING AT OR BEYOND THE OLD CHAPEL FOR CARS, VANS, ETC. Instead, please park in the large car-park of the Red Lion or the main street in front of it, or in the first few yards of Cheney End. There is limited parking for motorcycles, preferably Velocettes, on the forecourt of the Old Chapel.

Part Number Description Other Information Price

PUBLICATIONS

VSL376 SPARES LIST Sales List sent separately (i.e. with no other parts) costs

£3.00 for UK (please pay with stamps), £5.00 for Europe and £6.00 for Rest of the World (postage included in all cases).

£2.00

VSL100 HAYNES MANUAL - VM,VR,MSS ETC £17.50

VSL101/D INSTRUCTION BOOK - RIGID MSS The Rider's handbook (not the full service manual) £6.00

VSL102/A SERVICE MANUAL - VM,VR,MSS £12.95

VSL102/C SERVICE MANUAL - SWING ARM MAC £9.50

VSL102/E SERVICE MANUAL - MK2 KSS & KTS £12.75

VSL102/F SERVICE MANUAL - RIGID MAC & MOV £10.60

VSL102/G SERVICE MANUAL - MK1 KSS Hoping to reorder soon £8.00

VSL102/H INSTRUCTION BOOK - GTP The Rider's handbook, and also includes servicing information

£8.00

VSL104/A SPARE PARTS LIST - VM,VR,MSS etc £10.25

VSL104/C SPARE PARTS LIST - S/ARM MAC £7.95

VSL104/D SPARE PARTS LIST - RIGID MSS £7.95

VSL104/E SPARE PARTS LIST - MK2 KSS & KTS £11.25

VSL104/F SPARE PARTS LIST - RIGID MAC & MOV £8.75

VSL104/G SPARE PARTS LIST - MK1 KSS Hoping to reorder soon £8.00

VSL104/H SPARE PARTS LIST - GTP £8.00

VSL156A 24HOUR POSTER FULL SIZE Replica - approx 46cm wide by 69cm high £6.50

VSL158/DVD DVD GEARBOX REBUILD How to assemble …. By the late Dave Allcock £15.00

VSL159/DVD DVD ENGINE REBUILD How to assemble …. By the late Dave Allcock £15.00

VSL160 CALENDAR 1999 From the VOC France Section £3.00

VELOCETTE PART NUMBERS

A15/19 REAR MUDGUARD FRONT PIECE Not stocked - See VSL041

A22/13 NUMBER PLATE (RIGID MODELS) MOV/MAC/MSS/KSS MK2 up to 1939 - Hoping to reorder soon

£30.00

A22/20 NUMBER PLATE Rigid MOV/MAC/MSS post 1940. Also early s/arm MAC & MSS - Hoping to reorder soon

£26.50

A23 FRONT NUMBER PLATE All models £6.00

A27/6 PRIMARY CHAIN 75 LINKS £36.50

A28/4 SECONDARY CHAIN 108 LINKS £48.00

A28/8 SECONDARY CHAIN 124 LINKS £47.00

A34 5/16 BALL BEARINGS For front wheel £0.35

A37/2D OIL JET SEALING WASHER Bonded rubber inside metal £0.50

A37/5 1/4 INCH ALLOY SEALING WASHER See also A37/5D £0.18

A37/5D 1/4 INCH DOWTY SEALING WASHER Bonded rubber seal inside metal £0.22

A37/6D OIL JET SCREW SEALING WASHER Bonded rubber inside metal £0.32

A37/7 ALLOY SEALING WASHER 1/8 BSP For oil unions £0.30

A37/7D DOWTY SEALING WASHER 1/8 BSP Bonded rubber seal inside metal, replaces A37/7 £0.55

A131 REAR MUDGUARD TRANSFER £1.90

A132 PETROL TANK TRANSFER (MODERN) £1.90

A132/2 PET TANK TRANSFER T.T.WINNERS £1.90

A133 STEERING HEAD TRANSFER Waterslide transfer, varnish type no longer available £2.50

A134/2 OIL TANK TRANSFER, RIGID MODEL £1.90

A134/4 OIL TANK TRANSFER, S/ARM MODEL £1.95

A153/2 TOOL BOX TO FRAME CLIP Mild steel in primer £2.95

A172/2 MUDGUARD TAILPIECE Not stocked - See VSL039A

A179/3R G/BOX TO PCC GSK, MOV&MAC Nitrile Rubber £3.60

A179/5 PRI CH/CASE GASKET VM S/A models and KSS MK2 £3.98

A179/5R PRIM CH'CASE GASK, IN RUBBER In Nitrile rubber, S/A models and KSS MK2 £7.98

A179/6 GEARBOX TO C/CASE GASKET S/A See A179/6R for a much superior version. £0.90

A179/6R G/BOX TO PCC GSK. S/A. Nitrile Rubber £3.60

A220 LONG VELO TWISTGRIP RUBBER Hoping to reorder soon £6.35

A220/2 SHORT VELO TWISTGRIP RUBBER Suits all springers and later rigids £7.25

A225 LONG VELO LH HBAR RUBBER Hoping to reorder soon £6.35

A225/2 SHORT VELO LH HBAR RUBBER Suits all springers and later rigids £7.25

A250 SHOULDERED WASHER FOR OIL TANK £2.50

A253 CLUTCH COVER TRANSFER, MODERN "Clutch Adjust" transfer for S/A models. Waterslide £1.90

A253/2 CLUTCH COVER TRANSFER, RIGID "Clutch Adjust" transfer for rigid models £1.90

A253A CLUTCH COVER STICKER A "stick-on" version of A253 £1.00

A254 KICKSTART FOOTPIECE SPRING Pre '46 £3.00

A254/2 K/START SPRING WASHER 46 ON Fits swivelling crank type £0.55


A254/3 K/START F/PIECE SPRING SS Stainless £3.00

A276 PET TANK STRAP 5" CENTRE 3 GAL Stainless £3.40

A276/2 PETROL TANK STRAP, 4-1/4 GALL Up to 1962 Stainless £4.00

A287 OIL TANK FILTER CAP GASKET For bottom cap £0.75

A288 FELT OIL FILTER ELEMENT See also VSL019 & VSL020 £15.30

A293/2 OIL TANK FILTER CENTRE TUBE Alloy centre tube £7.25

A316 SUSPENSION UNIT RUBBERS Bottom rubber for rear suspension unit, priced per pair for one unit

£4.20

A319 WM1 DUST COVER FELT For Woodhead Monroe units £2.50

A353 PETROL TANK RUBBER U-SHAPE Se LE681 for rubber to suit 4 1/4g tank £3.40

B5/4 MOV/MAC G/BOX M/SHAFT £8.80

B22E SLEEVE GEAR BALL BEARING Budget priced equivalent of B22 of eastern origin £30.25

B22/2 GEARBOX LAYSHAFT BEARING Also use for B22/3 & BK22 which are identical £12.90

B22/3 GEARBOX LAYSHAFT BEARING Please order B22/2 which is the same bearing

B23 G/BOX (LATER) END COVER BEARING £11.25

B29 BALLJOINT PIVOT FOR B28/3 Ball joint for B28/3 Mk I KSS £4.00

B31/2 G/BOX OIL RETAINER SHIM £1.48

B34 1/8 C'SUNK SCREW £0.30

B35/2 SLEEVE GEAR DISTANCE PIECE Sleeve gear distance piece for rigid 0.625" length - Hoping to reorder soon

£4.40

B38 DRAIN PLUG Stainless, See also B38/M £3.50

B38/2 OIL LEVEL BOLT Stainless, 1934 on, KSS1/2, MOV, MAC to 15791/MSS £4.40

B38M B38 WITH MAGNETIC INSERT Stainless £9.00

B43 G/BOX GASK EARLY MK 1 KSS £0.60

B43/2 GEARBOX END COVER GASKET For Swinging Arm models £1.02

B60/4 GEAR LEVER RUBBER As fitted to Swinging Arm models £5.00

B60/5 FOOTREST RUBBER Also kickstart rubber and rigid gearchange £6.50

B86 L/SHAFT GEAR 28T MOV/MAC STD £8.30

B86/2 L/SHAFT GEAR 27T MOV/MAC Close ratio £8.30

B87 K/START ENG GEAR 1ST MOV/MAC Kickstart/first gear (18 teeth) MOV/MAC close ratio £9.40

B98 G/BOX END COVER GASKET £0.42

B100 GEARBOX MAINSHAFT CIRCLIP £0.40

BK19 KICKSTART RETURN SPRING See BK19A

BK19A IMPROVED K/START RETURN SPRING VSL development with improved characteristics. £8.00

BK19/2 K/START ENGAGING SPRING £1.05

BK22 GEARBOX LAYSHAFT BEARING Please order B22/2 which is the same bearing

BK23 G/BOX END COVER BEARING KTS/MSS £18.25

BK33 SLEEVE GEAR OIL THROWER Machined from tougher steel to resist damage to centre £7.50

BK40 OIL FILLER PLUG High quality unpolished stainless, engraved 'OIL' £6.50

BK40P OIL FILLER PLUG - PLAIN As BK40 but not engraved. £4.75

BK43 G/BOX GASK LATER MK 1 KSS Mk I KSS £0.60

BK43/2 G/BOX GASK MK II MOV/MAC R/MSS £0.85

BK52 THRUST CUP WIRE SPRING £2.95

BK73/2 K/START SPRING ANCHOR PIN ALL Fits all models, stainless £6.30

BK82 K/START L/SHAFT THRUST WASHER £5.90

BK82/2 K/START L/SHAFT THRUST WASHER KTT £4.00

BK85/2 KICKSTART BEARING BUSH £17.50

BK95 LAYSHAFT WASHER - SER 12 BOX £4.60

BK106 GEARSHAFT NUT, NF UNF thread 1/2 x 20 TPI nyloc £1.00

BK106/2 GEARSHAFT NUT BSF BSF thread 1/2 x 16 TPI nyloc £1.00

C6/2 CLUTCH THRUST PIN M/M/M/KSS £0.90

C6/3 CLUTCH THRUST PIN For 9 plate clutch £3.00

C7/26 CLUTCH THRUST BRG PLAIN RING See also VSL094 & VSL095 £12.10

C8 SLEEVE GEAR SHIM £1.55

C12 CLUTCH SPRING, EARLY MODELS £0.35

C12/3 CLUTCH SPRING, KSS/MSS Also early MAC - i.e. all 7 plate clutches £0.80

C12/4 CLUTCH SPRING, VR/VM/ETC £0.80

C28 CLUTCH SPHERICAL THRUST RING See also VSL094 & VSL095 £12.30

C31/3 CLUTCH OP. LEVER IN G/BOX Hoping to reorder soon £3.00

C32 SLEEVE NUT LOCK PLATE K;MAC 1940 See also B34 - locking plate screw £3.00

C32/2 SLEEVE NUT LOCK PLATE VM(9-PL) See also B34 - locking plate screw £3.00

C32/2A SLEEVE NUT PLATE UNDRILLED As C32/2 but supplied undrilled for the perfectionist. See also B34 - locking plate screw

£3.00

CK14/2 CLUTCH CABLE STOP Stainless £5.50

CK21/2 CLUTCH CABLE STOP HOLDER TOWER Stainless £8.00

E6/5 DYNAMO STRAP Mild steel, in primer - Hoping to reorder soon £8.45

E9/5 BATTERY STRAP, FRONT In brushed stainless steel £11.00


E9/6 BATTERY STRAP, REAR In brushed stainless steel £11.00

E16 DYNO BELT FLAT GTP £16.80

E16/2 FLAT DYNAMO BELT, KSS/MSS See also VSL380 to VSL386 - Hoping to reorder soon £16.80

E16/3 DYNAMO ' V ' BELT, SHORT e.g. for VM&36W Dynamo See also VSL380 to VSL386 £6.20

E16/4 DYNAMO ' V ' BELT, LONG e.g. for VM&60W Dynamo See also VSL380 to VSL386 £6.20

E51 BATTERY STRAP TRUNNION, PLAIN Stainless £3.15

E51/2 BATTERY STRAP TRUNNION, THREAD Stainless £3.65

E53 2 BA x 1-1/2'' BAT STRAP BOLT Stainless £2.50

F4/3 REAR STAND PIVOT PIN Stainless £6.50

F4/5 R.STAND PIVOT PIN MSS/KSS 1936 on - Stainless £6.00

F4/6 REAR STAND PIVOT PIN With silencer support - Stainless £7.90

F4/10 PROP STAND BOLT S/A models, Stainless £3.60

F4/25 PROP/REAR STAND BOLT RIGIDS H,U,GTP, KSS MkI & to 1941 MOV,MAC Rigid models, Stainless

£5.20

F32/3 STEERING HEAD TOP CONE Not stocked - See VSL164

F32/4 STEERING HEAD BOTTOM CONE Not stocked - See VSL165

F60/7A REAR CH/GUARD FRT SEC MOV/MAC Will not be re-stocked owing to tooling costs - F60/9 is

almost indistinguishable, the difference is just the lower lip, which is approx 1/2" lower

F60/7B REAR CH/GUARD REAR SEC MOV/MAC £62.90

F60/9 REAR CH/GUARD FRT SEC MSS/KSS £55.00

F60/10 REAR CH/GUARD REAR SEC MSS/KSS £71.40

F69/2 STAND SPRING 1920 TO 27 £28.00

F69/5 PROP STAND SPRING Stainless, also fits centre stand £4.30

F130/9 REAR BRAKE LEVER PIVOT, MK2 Stainless, KSS Mk II £7.80

F130/9A R. BRAKE LEVER PIVOT M. STEEL £4.00

F130/10 REAR BRAKE LEVER PIVOT, RIGID Stainless, 1940 on £7.70

F130/14 REAR BRAKE LEVER SUPPORT S/A £6.40

F174/4 FR ENGINE PLATE S/A MAC Enamelled mild steel £5.75

F201/2 FIXING PIN CHAINCASE Stainless Steel - new lower price ! £2.80

F233 REAR BRAKE PEDAL SPRING £7.80

F233/4 BRAKE PED SPRING 46/53 RIGIDS Not stainless - Hoping to reorder soon £3.60

F233/5 BRAKE PEDAL SPRING Stainless, for S/A models £3.20

F252 FRONT FORK SPRINGS - SOLO priced per spring £7.25

F253 FORK TOP NUT, STANDARD Stainless £14.00

F253/2 FORK TOP NUT, THRUXTON Stainless £14.00

F256 TOP FORK BUSH - 1.240 Order as LE215

F256/2 TOP FORK BUSH - 1.250 For later fork leg with 1.250" OD - Oilite material £15.00

F263 STEERING DAMPER ROD Stainless steel £7.00

F267 FORK DAMPER CIRCLIP £0.80

F269 H/BAR CLAMP BOLT S/A Stainless, for S/A models £4.40

F270/2 STEERING HD L/NUT DAMPER TYPE Stainless, for steering head £15.95

F270/3 STEERING HD L/NUT THRUXTON Stainless, for steering head - Hoping to reorder soon £12.20

F272 S/A H/LAMP BRKT RUBBER BUFFER Headlamp bracket rubber buffer for S/A models £1.57

F282 T/FORK SPRING DUST COV BUFFER Dust cover rubber buffer for telescopic forks £1.10

F284/2 PRI CH/CASE W BEADING per correct length £10.50

F285 CHAINCASE O-RING SMALL BOSS Crankcase to chaincase 'O' ring seal for small boss (MAC & MSS to 12078)

£1.00

F285/2 CHAINCASE O-RING LARGE BOSS For VM, VR, VMT also MSS from 12079 £0.95

F291 FELT STRIP, REAR C/GUARD £0.60

F292 CENTRE STAND PIVOT £4.35

F295 SUSPENSION UNIT TOP RUBBER Top rubber and steel sleeve for a single suspension unit £5.00

F301 TRUNNION SHAFT FELT SEAL Not stocked - use F301A

F301A TRUNNION SHAFT GREASE SEAL Bonded rubber seal substitute for felt £1.80

F303 REAR MUDGUARD STAY SPACER Stainless £1.80

F309 PRIMARY C/CASE FELT RING Please use F309A

F309A PRIMARY C/CASE NITRILE SEAL Medium hardness nitrile rubber seal (replaces earlier neoprene and silicone versions). Preferably needs to be bonded into the groove, & oiled on assembly.

£9.30

FA1/3 TRUNNION SHAFT Stainless £22.50

FA3/5 TRUNNION BUSH, NYLON/METAL TYP Acetyl copolymer. After fitting, ream for very tight fit £4.25

FA47 REAR CHAIN ADJUSTER S/A 1/4 BSF nut not included, order a VSL333 £3.00

FA122 FRT M/GD DIST PCE VMT. £2.50

FB11/5 FRONT BRAKE CAM LEVER Stainless £5.00

FB21/3 FRONT WHEEL SPINDLE MOV/MAC to '38 £4.40

FB54 FRONT BRAKE COTTER SHACKLE Stainless £2.25

FB61 FELT FOR BRAKE SHACKLE PIN £0.39

FK19/2 GEARBOX ADJUSTER £5.50


FK23/2 SQUARE F/REST BAR £19.70

FK23/10 FOOTREST BAR Square bar, 4.75" long overall, Right-hand side, Rigid models from 1942

£4.25

FK23/11 FOOTREST BAR Square bar, 3" long overall, Left-hand side, Rigid models from 1942

£3.75

FK23/14 FOOTREST BAR Square bar, S/Arm models, fits either side, priced per single side

£5.90

FK26&FK27 FRONT/ REAR ENGINE PLATE SET For Mk 1 KSS models £42.50

FK43 BRAKE ROD THREADED TRUNNION Stainless £4.30

FK43/2 BRAKE ROD TRUNNION, PLAIN Stainless £3.75

FK50/2 BRAKE TORQUE BOLT High tensile stainless steel £5.00

FK61/4 HANDLEBAR GTP See VSL021

FK61/8 HANDLEBAR See VSL030

FK75/14 ENGINE STEADY, FLAT Stainless - Hoping to reorder soon £4.10

FK81 GEARBOX BOLT, LONG Stainless £7.50

FK81/2 G/BOX BOLT, SHORT Stainless £7.75

FK151 RUBBER TANK BUFFERS (LONG TOP) For rigid MOV, MAC & MSS £2.30

FK151/KTT RUBBER TANK BUFFER KTT (LONG) As FK151 but for 7/16 bolt. £2.00

FK151/2 RUBBER TANK BUFFERS (SHORT) For rigid MOV,MAC & MSS £2.25

FK151/2KTT RUBBER TANK BUFFER KTT (SHORT) As FK151/2 but for 7/16 bolt £2.00

FK151/3 RUBBER TANK BUFFER (V. SHORT) KSS MK2 and rigid MSS rear. £2.00

FK151/4 PETROL TANK RUBBER BUFFER S/A models £3.85

FK152 TANK FIXING BOLT KSS/MSS £6.80

FK152/2 TANK FIXING BOLT Washer not included, order a VSL347 £4.53

FK157/15 CENTRE MUDGUARD STAY Stainless.Centre fitting for S/A teleforks £22.00

FK166 SADDLE PINS,REAR Stainless £7.60

FK171/7CAST PAIR OF STAND LEG CASTINGS Bare castings for MOV/MAC/MSS/KSSMK2. Not supplied by mail - too heavy.

£55.00

FK205A PRIMARY CHAINCASE SPACER Distance piece made in alloy and complete with O-ring seals. - Hoping to reorder soon

£7.25

FK206 STUD Rear chainguard to primary chaincase cover for rigid models

£0.70

FK207 STUD Dynamo belt cover to primary chaincase cover for rigid

models

£0.70

FK221/3 ENGINE BOLT SPACER Stainless £3.80

FK221/3A ENGINE BOLT SPACER M/STEEL Mild steel £1.50

FK228 GEARBOX ADJUSTER STOP Stainless £6.50

FK242 FLAT STEERING DAMPER PLATE S/Arm models - Hoping to reorder soon £5.10

FK243 CRANKED STEERING DAMPER PLATE S/Arm models - Hoping to reorder soon £5.10

FK246 STEERING DAMPER PRESSURE DISC £4.90

FK249 STEERING DAMPER FRICTION DISC Hoping to reorder soon £4.75

FK257 TOOLBOX TO MUDGUARD CLIP Stainless £4.50

FK264 LOCK PLATE FOR PCC SCREWS Hoping to reorder soon £2.80

GC24/2 STRIKING PAWL SPRING £3.00

GC45 GEARLEVER PIVOT MK II KSS Stainless £8.00

GC53 G/BOX ROCKER SHAFT BUSH-SHORT Hoping to reorder soon £6.20

GC54 G/BOX ROCKER SHAFT BUSH , LONG Hoping to reorder soon £6.95

K2/6 INLET VALVE, MK I 5/16'' STEM Plasma nitrided stems. £30.00

K2/12 VALVE IN OR EX MK1 KSS TO '35 Our valve is 3/8" stem and 1.725" head diameter £22.50

K2/13 EX VALVE MKIV & MKV KTT Our valve is 3/8" stem and 1.66" head diameter £11.00

K2/14 INLET VALVE KSS MKII 1 9/16" head diameter £27.00

K2/15 EXHAUST VALVE, MK II Plasma nitrided stems £31.50

K2/16 INLET VALVE KSS MKII Head diameter 1.680". Plasma nitrided stems £31.50

K2/17SP EXHAUST VALVE MKVIII KTT As K2/17 but 4.328 inches long £28.50

K2/19 INLET VALVE MKVIII KTT £32.00

K3/3 INLET VALVE GUIDE, K MKI Not stocked - Use K3/6

K3/4 MK 1 KSS EX GUIDE £20.00

K3/6 MK 1 KSS IN GUIDE Larger flange, oil hole, for 5/16" valve stem £23.25

K3/13 VALVE GUIDE, INLET Use K3/13C

K3/13C KSS MK2 IN GUIDE COLSIBRO Valve guide in high duty Colsibro material £27.00

K3/14 VALVE GUIDE, EXHAUST Use K3/14C

K3/14C KSS MK2 EX GUIDE COLSIBRO Valve guide in high duty Colsibro material £27.00

K32&K33 BOTTOM BEVEL GEAR PAIR Only sold as a pair and only to be used as a pair £155.00

K6/2&K7/3 VALVE SPRING SET - LOOSE INNER Priced per set of 2x K6/2 & 2x K7/3. £22.50

K6/7&K7/6 VALVE SPRING SET - TIGHT INNER Priced per set of 2x K6/7 & 2x K7/6 £18.00

K41/4 ROCKER SKID Cam follower for MK1 K models £10.75

K52 VERTICAL SHAFT GLAND NUT Stainless £17.60

K55 TIMING COVER SCREW - SLOTTED Stainless £1.20


K55A TIMING COVER SCREW - SOCKET Stainless £0.35

K67 OIL REGULATOR SPRING £3.75

K68 PACKING FOR MAGNETO CHAINCASE £0.90

K68/2 TIMING COVER GASKET KSS MKI Hoping to reorder soon £0.99

K68/3 TIMING COVER GASKET KSS MKII £0.50

K71 SPROCKET FOR MAGNETO MK1 KSS and KTT - Hoping to reorder soon £18.00

K71/2 KSS MAGNETO SPROCKET £33.00

K75 KSS MAGNETO DRIVE SPROCKET (Engine end) £35.10

K76 VALVE LIFTER LEVER SCREW Stainless - Hoping to reorder soon £2.00

K84 JUMP RING (CIRCLIP ) ALL KSS £1.10

K87 CRANKSHAFT BALL BEARING Mainshaft ball bearing, taper bore, timing side KSS Mk I & II, MOV, MAC

£105.00

K87/2 CRANKSHAFT BEARING Mainshaft roller bearing, taper bore, drive side for KSS Mk I, MOV, MAC, timing side to MSS6300 & Mk VIII

(MCRA22)

£110.00

K95 TAPPET COVER SCREW, SLOTTED Stainless £1.20

K95A TAPPET COVER SCREW, SOCKET Stainless - Hoping to reorder soon £0.40

K95L TIMING/TAPPET CVR SOCKET SCREW Stainless - 3/4 long for damaged thread situations - Hoping to reorder soon

£0.40

K100 STEERING HD BALL See also VSL164 & VSL165 £0.08

K108/2 ROCKER COVER GASK MK2 KSS £0.50

K109/4 CAMBOX END COVER PACKING, KTP £0.30

K110 OIL PUMP SHIM, KSS £1.25

K111 SHIM - M/SHAFT BEV GEAR 0.003" £0.85

K111/2 SHIM - M/SHAFT BEV GEAR 0.005" £0.85

K111/3 SHIM - M/SHAFT BEV GEAR 0.010" £0.85

K113 MAG CHAIN FOR CAMMYS Endless £20.00

K113L MAG CHAIN FOR CAMMYS Chain with joining link £20.00

K115 BALL VALVE SPRING £3.00

K120 PAPER PACKING FOR K46/2 £0.42

K123 COPPER ASBESTOS WASHER FOR K99 Hoping to reorder soon £0.30

K123/2 BEVEL HOUSING COVER GASKET £0.55

K127 CRANKSHAFT KEY-WASHER (Goes under left-hand threaded nut) £1.15

K128 SHIM - CAMSHAFT BEARING 0.002" £0.85

K128A SHIM FOR CAMSHAFT BALLRACE 0.003"

KSS Mk II £1.60

K128/2 SHIM - CAMSHFT BEARING 0.005" £0.85

K128/2A SHIM FOR CAMSHAFT BALLRACE 0.006"

KSS Mk II £1.60

K128/3 SHIM FOR CAMSHAFT BALLRACE 0.008"

KSS Mk II £0.85

K148 FELT PAD FOR ROCKER,KSS MK I £0.48

K150 OIL SHIM, MAIN BEARING £1.15

K155 VALVE LIFTER SPRING MK1 KSS £4.50

K155/2 VALVE LIFTER SPRING KSS MKII Stainless £4.90

K159/2 FELT WASHER For rocker spindle Mk I KSS £0.75

K172 CAMBOX COV FELT MK1 £0.35

K174 MAIN BEARING SHIM, 0.005'' £0.80

K174/2 MAIN BEARING SHIM, 0.003" £0.80

K174/2A MAIN BEARING SHIM, 0.002" £0.80

K174/3 MAIN BEARING SHIM, 0.010" £0.80

K174/3A MAIN BEARING SHIM, 0.008" £0.80

K180 CARBURETTOR PACKING KSS Mk II £0.51

K180/24 CARBURETTOR PACKING GASKET 4mm Tufnol gasket, 0.937 ins bore. For MOV/MAC £5.25

K180/3 CARBURETTOR PACKING GASKET 4mm Tufnol gasket, 1.062 ins bore for Spring frame MSS & MAC

£5.25

K191 BIG END ROLLERS STD ONLY £1.10

K191H HOFFMAN BIG END ROLLERS STD Genuine Hoffman rollers £1.65

K193 BIG END CAGE,MAC £5.40

K203/2 KSS MKII COMP PLATE 0.031 £2.60

K220 KSS HEAD GASKET £5.20

K239 KSS ROCKER PIN NUT - PLATED Mk II rocker shaft locknut. Cadmium plated. - Hoping to reorder soon

£5.00

K240 MAGNETO DRIVE COVER GASKET £0.75

K241 O RING MK2 KSS ROCK SPINDLE £0.50

KA4/9 PETROL TANK CAP Not stocked - please order as VSL007

KA6/4 OIL TANK CAP - NON-VENTED Please order as VSL008A

KA6/6 OIL TANK CAP - VENTED Please order as VSL008


KA12/5 TOOLBOX Metal part only for metal/leather toolbox up to 1934 - Hoping to reorder soon

£65.00

KA12/8 TOOLBOX Metal part only for metal/leather toolbox 1934 to 1937 - Hoping to reorder soon

£65.00

KA12/10AS TOOLBOX - D SHAPED All metal - includes knob and clip - Hoping to reorder soon

£75.00

KA12/11AS TOOLBOX "D" SHAPE WD TYPE All metal-includes knob and clip - Hoping to reorder soon £90.00

KA16/9 FRONT MUDGUARD Not stocked - See VSL042

KA27 PRIMARY CHAIN 74 LINKS £32.00

KA27/2 PRIMARY CHAIN 68 LINKS £34.00

KA27/4 PRIMARY CHAIN 67 LINKS £37.00

KA28/2 SECONDARY CHAIN 100 LINKS £36.71

KA28/4 SECONDARY CHAIN 99 LINKS Complete with joining link £44.80

KA28/6 REAR CHAIN 101 LINKS £64.50

KA28/6T CHAIN 102 LINKS, 0.625 X 0.38 £49.00

KA46 GREASE NIPPLE 1/4 BSF £0.65

KA70/4L L/H KNEEGRIP RIGID MODELS £15.25

KA70/4R R/H KNEEGRIP RIGID MODELS £15.25

KA70/5AS R/H KNEEGRIP S/A MODELS £15.85

KA70/6AS L/H KNEEGRIP S/A MODELS £15.85

KA76/2 FOOTREST RUBBER £8.10

KA93/3AS OUTER BELT COVER For KSS/MOV/MAC/MSS & early springer MAC/MSS - Hoping to reorder soon

£35.00

KA93/6AS DYNO COV INNER MOV/MAC For MOV/MAC rigid & early springer MAC - Hoping to reorder soon

£23.00

KA93/8 INNER BELT COVER For KSS, MSS rigid & early springer MSS - Hoping to reorder soon

£24.00

KA93/11 DYNO OUTER COVER VM/VR Hoping to reorder soon £32.00

KA100/17 FORK GAITER CLIP An ordinary worm-drive clip. Stainless - Hoping to reorder soon

£2.45

KA115/2D BALL VALVE UNION SEALING WASHER Bonded rubber inside steel £0.60

KA115/3D BALL VALVE BODY SEALING WASHER Bonded rubber inside steel £0.60

KA142/2 RE-MOVEABLE SILENCER BAFFLE £18.00

KA169 PILLION F/REST RUBBER STRAIGHT £11.75

KA169/2 PILLION RUBBER JOHN BULL TYPE £11.75

KA179 PRIMARY CHAINCASE GASKET Rigid MOV/MAC £4.40

KA244 PRIM CASE INSP COV CORK £0.70

KA261 CLUTCH ADJUSTMENT COVER Rigid models £12.00

KA281 KSS EX PIPE/HEAD COPPER SEAL £1.55

KA287 KNEE GRIP SCREWS Polished stainless £2.55

KA303 REAR MUDGUARD EXTENSION BOLT Stainless £7.91

KA312 FORK GAITER VM VMT ETC Priced per single gaiter £20.00

KA314 PET TANK BADGE SCREW For round badge - Stainless - Hoping to reorder soon £2.40

KA315 TANK BADGE VIPER SILVER £34.80

KA315/2 TANK BADGE VENOM RED Hoping to reorder soon £34.80

KA315/4 TANK BADGE OBLONG £30.00

KA328 SPECIAL TANK TRIM L/HD SHORT £11.00

KA328/2 SPECIAL TANK TRIM L/HD LONG £11.00

KA329 SPECIAL TANK TRIM R/HD SHORT £11.00

KA329/2 SPECIAL TANK TRIM R/HD LONG £11.00

KC40AS SPRING HOLDER ASSEMBLY MAC & MOV up to 1941 £9.40

KS8/10 REAR WHEEL SPINDLE EN16T with Stainless head £30.50

KS12/2 REAR WHEEL STUD RIGIDS MOV ETC £2.25

KS13 BRAKE SHOE SPRING MSS/KSS £2.05

KS18/3 FRONT & REAR WHEEL BEARINGS £20.50

KS43 BRAKE ROD SPRING RIGID Stainless. Rigids except MAC & MOV £2.45

KS41/2 REAR BRAKE STEADY 7 KSS/MSS 7/16" Wheel Spindle £4.00

KS41/3 REAR BRAKE STEADY KSS/MSS 5/8" Wheel Spindle £4.00

KS43/2 BRAKE ROD SPRING S/A Stainless. S/A models and rigid MAC & MOV £2.45

KS44 BRAKE ROD ADJUSTING NUT Stainless £6.00

KS51/2 WHEEL SPINDLE WASHER Stainless £2.50

KS52/2 REAR WHEEL DISTANCE PIECE Rigid models - Stainless £5.50

KS52/4 REAR WHEEL DISTANCE PIECE S/A models - Stainless. £7.00

KS60 REAR BRAKE DRUM STUD NUT Stainless Steel £4.10

LE106 BRAKE CAM STEADY FELT £0.85

LE118 KICKSTART CRANK PLUNGER SPRING For folding footpiece using spring and ball location £2.00

LE191 CIRCLIP FOR TELE-FORK BUSH £1.25

LE215 TOP FORK BUSH - 1.240 To fit 1.240" fork leg (see also F256/2) - Oilite material £16.75


LE216 BOTTOM FORK BUSH £12.50

LE242 KICKSTART COTTER PIN £0.90

LE319/2 REAR NUMBER PLATE S/A Space for 6 characters - Hoping to reorder soon £29.50

LE319/3 REAR NUMBER PLATE S/A Space for 7 characters £20.00

LE335/2 FRONT FORK OIL SEAL £5.25

LE532 STEERING HEAD CUP Not stocked - See VSL 164 & 165

LE572 OIL FILTER GASKET, TOP £0.75

LE598 SPLIT BEADING, PER YARD £2.90

LE608 ENGINE FAIRING TRANSFER Winged-style transfer, waterslide, used on Engine Fairings £2.80

LE681 CRUCIFORM TANK RUBBER Use with any 4 1/4 gallon tank £7.00

M2/2A VALVE FOR MOV/MAC. IN or EX As M2/2 but in better material £24.00

M2/4 INLET VALVE, MSS IRON ENG £29.00

M2/5 EXHAUST VALVE MSS IRON ENGINE £29.00

M2/6 EXHAUST VALVE S/A MSS Not stocked - See M2/17A

M2/7 INLET VALVE, VM/MSS £19.50

M2/7A VM INLET VALVE LEAD FREE For unleaded £30.00

M2/8 ALLOY MAC INLET/EXHAUST VALVE For unleaded £21.50

M2/11 EXHAUST VALVE, LATE MAC, 3/8" Plasma nitrided stems £27.50

M2/12 VR IN VALVE Unknown material specification - See M2/12A £8.00

M2/12A VALVE INLET VR UNLEADED Suitable for unleaded fuels. Plasma nitrided stems. £25.80

M2/16 VR EX VALVE Not stocked - See M2/16A or M2/16N

M2/16A VR EX VALVE UNLEADED For unleaded £27.00

M2/16N VIPER EX.VALVE N80 LEAD FREE For unleaded £48.00

M2/17A EX VALVE VM U/LEADED For unleaded. Plasma nitrided stems £25.00

M3 MOV/MAC IN/EX VALVE GUIDE £18.50

M3/2 EXHAUST VALVE GUIDE, MSS, IRON £18.20

M3/3 IRON MSS INLET GUIDE £18.20

M3/5 EX GUIDE VM/VR ETC.. Alu/Bronze See also M3/5C £14.50

M3/5C VALVE GUIDE EXH VM COLSIBRO VM/VR/MSS Exhaust valve guide in high duty Colsibro material

£18.90

M3/6 INLET GUIDE VM/VR(MAC IN/EX) Alu/Bronze See also M3/6C. (also used on some MAC inlet and exhaust)

£11.55

M3/6C VALVE GUIDE IN VM COLSIBRO VM/VR/MSS Inlet valve guide in high duty Colsibro material

£17.75

M6/4&M6/5 VALVE SPRINGS VM/VR ETC Priced per set of four springs for two valves £28.50

M39 MOV/MAC/MSS TAPPET ADJUSTER £2.20

M52/A P/ROD TUBE GL/NUT EXCL O RING Pushrod tube gland nut with O-ring groove, requires O-ring - See M261/2.

£11.00

M56/2 CYLINDER HOLDING STUD Short adapter in plated mild steel for 5/16 cylinder studs - Hoping to reorder soon

£1.25

M56/6 CYLINDER HOLDING STUD Short adapter in stainless steel for 3/8 cylinder studs £4.40

M56/7 CYLINDER HOLDING STUD Long adapter in stainless steel for 3/8 cylinder studs £5.00

M68 TIMING COVER GASKET £0.94

M70 CYLINDER BASE GASKET, MOV/MAC £0.45

M70/2 CYLINDER BASE GASKET, MSS IRON 4 gaskets printed on A4 sheet - cut your own. - Hoping to reorder soon

£1.50

M70/3 CYL BASE GASKET VM/VR ETC £0.60

M72/5 ATD GEAR 11 DEG. £12.20

M72/9 MAGNETO GEAR £46.00

M80/4 OIL PUMP GEAR/SPIN FOR .186 WI Oil pump spindle with 0.186" wide gear £4.50

M82 OIL PUMP GEAR .311 WIDE £5.00

M82/2 OILPUMP GEAR.186 WIDE £5.00

M87 CRANKSHAFT BEARING Roller bearing for KSS and iron MSS (L462) - Hoping to reorder soon

£240.00

M87/3 MAIN BRG VM/VR ETC.. Taper roller -Timken manufacture £55.00

M90 ENG SHOCK ABS SPRING MOV/MAC Hoping to reorder soon £6.20

M90/2 ENG SHAFT SHK/ABS SPRING £6.75

M91/3 ENG SHOCK ABS SPKT 3 LOBE MAC £9.90

M93 ENGINE SHOCK ABSORBER NUT Not stocked - see M93A

M93A ENGINE SHOCK ABSORBER NUT For MAC. With hexagon for tightening. No split pin facility but could be drilled. (See also SL6/67)

£11.50

M93/2 ENGINE SHOCK ABSORBER NUT Not stocked - see M93/2A

M93/2A ENGINE SHOCK ABSORBER NUT For MSS,VR,VM With hexagon for tightening. No split pin facility, but could be drilled. (See also SL6/67)

£12.50

M97 OILPUMP SCREW MAC/MOV/MSS £0.70

M120 PUSH ROD TUBE TOP GASKET £0.58

M120/2 PUSH ROD TUBE BOTTOM GASKET £0.95

M155/2 EXHAUST VALVE LIFTER SPRING Stainless £3.00


M180/2 GASK. CARB TO CYL HEAD £5.25

M180/22 GASK. CARB TO CYL HEAD, VR/MSS VR and MSS £1.00

M180/25 CARBURETTOR PACKING GASKET 4mm Tufnol gasket, 1.00 ins bore for VR & Mk2 KSS £5.25

M180/30 CARBURETTOR PACKING GASKET 4mm Tufnol gasket, 1.187 ins bore for VM models £5.25

M192 BIG END PIN - MOV Old stock - Pattern component. One piece construction. Supplied without nuts

£20.00

M193 MOV BIG END BEARING CAGE £11.00

M203 MOV/MAC COMP PLATE 0.031 £2.60

M203/6 VM/VR/MSS COMP PLATE 0.031 £2.00

M208 CYLINDER STUD NUTS MAC/MOV £3.80

M214 OIL BOLTS £5.50

M216 BELLEVILLE WASHER £2.70

M220 CYL HD COPPER GASK MOV/MAC £3.95

M220/2 CYL HD COPPER GASK IRON MSS £2.60

M220/3 CYL HD COPPER GASK VM/MSS £4.90

M222 ROCKER THRUST SPRING £1.90

M224/2 VALVE GUIDE/SPRING COV GASKET £0.48

M226 OIL PUMP BASE PLATE GASKET £0.40

M245 MAIN BRG SHIM VM ETC .003 £0.65

M245/2 MAIN BRG SHIM VM ETC .005 £0.65



M248 MAC VALVE SEAT £4.50

M250 ROCKER BRG BRKT GASKET MAC £0.50

M251 CYLINDER STUD WASHER For alloy MAC, 1952 on - Hoping to reorder soon £0.40

M255 BALL VALVE SPRING £1.90

M256 MAC R/BOX GASKET ALLOY HD Paper type £0.60

M256/2 TAPPET COV GASKET VM/VR/MSS £0.55

M260 MAGNETO FLANGE GASKET £0.80

M261 CYLINDER STUD OIL SEAL Also used for the valve lifter shaft seal £0.30

M261/2 CARB FLANGE O RING Also for M52/A Gland Nut £0.50

M263 ROCKER BOX GASKET Wire reinforced for VM etc £7.35

M266 3/8" NYLOC NUT CYL HD.NOT S/S For VM etc £0.85

MAS6 STEERING HEAD LOCKNUT For models with no steering damper - Stainless £16.10

MAS24 REAR CHAIN COVER, FRONT HALF Hoping to reorder soon £37.00

MAS37/2 TOOLBOX S/ARM MODELS (Not VMT) S/A Tool Box painted black, inc. Brackets & Stainless Knob

£125.00

MAS41 BRAKE ROD S/ARM 20 INCH Stainless - Hoping to reorder soon £14.00

MAS44/2 DYNAMO STRAP RIGID MODELS Voltage regulator above dynamo £15.00

MAS44/2A DYNAMO STRAP S/A MAC/MSS/VIPER Voltage regulator above dynamo £15.00

MAS57 CLUTCH THRUST CAGE WITH BALLS Not stocked - See VSL094 & VSL095

MAS73 HUB DUST COVER AND SLEEVE Stainless £15.75

MAS85 REAR MUDGUARD TAILPIECE Not stocked - See VSL039

MAS95 REAR CHAINGUARD S/A MODELS £68.00

MAS117/2 S/A NO PLATE TUNNEL £29.00

MAS120 INNER BELT COVER Inner dynamo belt cover for later VM/VR/MSS - Hoping to reorder soon

£25.50

RT68 GTP OIL PUMP COVER GASKET £0.30

RT115 OIL VALVE SPRING Mov/Mac - Hoping to reorder soon £1.00

S27/2 BRAKE SHOE SPRING S/A £0.90

S32 FRONT BRAKE CLEVIS PIN Stainless steel £4.20

S41/3 REAR BRAKE STEADY MOV/MAC For 5/8" Wheel Spindle and 13/16" Cam Boss £4.00

S41/5 REAR BRAKE STEADY S/ARM Stainless £5.00

S55/3 REAR BRAKE TORQUE STAY Stainless £7.00

S68 REAR BRAKE PLATE BUSH 2 required per assembly £2.00

SL6/39 CENTRE STAND STUD WASHER Hoping to reorder soon £0.50

SL6/42 PRI CH/CASE STEPPED WASHER £2.35

SL6/50 HEAVY DUTY 3/8 WASHER Suitable for cylinder head studs. £0.15

SL6/60 REAR SUSP PIVOT PIN WASHER Hoping to reorder soon £1.70

SL6/65 GEAR SHAFT WASHER, SPROCKET £1.30

SL6/65B GEAR SHAFT SPROCKET, LOCKING £1.50

SL6/67 SHOCK ABSORBER WASHER Fits inside shock absorber nut £2.10

SL8/5 1/4 BSF X 3/4 HEX SCREW Consider cutting down VSL322A

SL8/3 1/4 BSF X 9/16 DOME HEAD BOLT Hoping to reorder soon £1.80

SL8/4 1/4 BSF X 1/2 DOME HEADED BOLT £1.80

SL8/5A 1/4 BSF X 3/4 DOME HEADED BOLT £1.80

SL8/16 BOLT 1/4 BSW X 1 INCH Please order VSL322A


SL8/17 BOLT 1/4 BSW X 1 1/4 INCH Please order VSL322B

SL8/21 BOLT 1/4 BSW X 1 3/4 INCH Please order VSL322C

SL8/22 BOLT 1/4 BSW X 11/16 INCH Consider cutting down VSL322A

SL9/3 OIL TANK FIXING BOLT Stainless £3.00

SL9/18 5/16 BSF X 2 3/4 BOLT Please order VSL326

SL9/19E KSS MK2 CYL HD BOLT EXTENDED Heads extended by about 1.5", they protrude above fins to avoid spanner damage. Made in high-tensile steel, but could easily be shortened.

£9.60

SL9/22 5/16 BSF X 1 1/2 HEX BOLT Please order VSL320

SL11/1 REAR ENG PLATE BOLT & G/BOX Stainless £4.65

SL11/1/B REAR ENG PLATE & G'BOX BOLT Blackened H-T Steel - Hoping to reorder soon £2.25

SL11/2 FRONT ENGINE PLATE BOLT Stainless £4.96

SL11/2/B FRONT ENGINE PLATE BOLT Blackened H-T Steel - Hoping to reorder soon £2.30

SL11/15 KICKSTART PIVOT BOLT Stainless £2.85

SL30/12 BRAKE ROD KSS/MSS RIG 23 INCH Stainless - Hoping to reorder soon £14.00

SL30/24 CR/CASE STUD 1/4 X 2-7/16 Plated £0.90

SL30/37 BRAKE ROD, MOV/MAC 27 INCH Stainless £10.87

SL31/17 CENTRE STAND PIVOT STUD Stainless £5.50

SL32/5 MAGNETO STUD MK1 K Blackened H-T Steel - Hoping to reorder soon £1.15

SL56/5 5/16 CYCLE THREAD NUT Please order VSL337

SL56/6 5/16 CYCLE THRD NUT-SMALL HEX Suitable for magneto nuts on early engines £1.20

SL56/8 3/8 CYCLE THREAD NUT Please order VSL340

SL56/9 REAR WHEEL NUT MK1 K Blackened H-T Steel £1.40

SL56/13 5/16 BSW NUT WITH SMALL HEX Used on magneto flange and gearbox adjuster £2.60

SL56/19 MAGNETO NUT MK1 K Blackened H-T Steel £1.20

SL56/32 MAINSHAFT NUT - TIMING SIDE Left hand thread £2.50

SL56/33 5/16 CEI 1/4 HEX G/BOX SEL BAR £1.40

SL56/33/B TAPPET NUT/GEAR SEL ROD NUT Blackened H-T Steel £1.20

SL71/1 MAINSHAFT S/ABS NUT COTTER PIN £0.25

SL71/2 1/16'' X 1/2'' SPLIT PIN £0.20

SL80/21 SCREW 2BA X 1/4 INCH For Voltage Regulator Box - Hoping to reorder soon £0.30

SL80/22 SCREW 2BA X 3/8 INCH Chaincase screw and timing cover oil jet £0.40

SL80/22A SOCKET SCREW 2BA X 1/2 INCH Primary chaincase £0.75

SL102/13A OIL TANK FILTER STUD Stainless £5.00

SL109/6 BOLT 5/16 BSF X 2 INCH Please order VSL325

SL109/10 5/16 BSF X 1 1/4 BOLT Please order VSL302B

SL109/11 BOLT 5/16 BSF X 1 5/8 INCH Please order VSL324

SL109/15 5/16 BSF X 3 HEX BOLT Please order VSL327



SL110/4 BOLT 3/8 BSF X 1 29/32 INCH Please order VSL329A

SL110/8 3/8 IN X 2 IN U/H BOLT FK TOP Please order VSL329A

SL111/1 TRUNNION LUG CLAMP BOLT Stainless £3.10

T66 REAR STAND NUT, RIGID Stainless £2.30

T66B REAR STD NUT BLACK ORIGINAL £0.55

W8 BRAKE PLATE SPH WASHER Blackened H-T Steel £1.80

W12/2 FELT WASHER, FRONT BRAKE CAM £0.60

W15/2 BALL VALVE BALL £0.40

W15/2R BALL VALVE BALL IN RUBBER Nitrile rubber. Tried and tested. Does seal. £2.70

W21/6 FRONT WHEEL SPINDLE EN16T material with Stainless head £30.50

W53 F.BRK ADJ FERRULE 32 TO 38 Hoping to reorder soon £1.50

W58 CABLE STOP ON BRK.PL.KSS 32-38 Hoping to reorder soon £1.60

W60 FRONT WHEEL GREASE RETAINER £2.50

W64/2 FRONT WHL SPIN CLAMP S/A Stainless - Hoping to reorder soon £7.30

W65/2 WHEEL SPINDLE NUT S/ARM £5.90

W71 FRONT BRAKE CAM BUSH £2.50

WA27 GASKET GP CARB TO CYL HEAD £0.75

WEBB FORK PARTS

* Note - We have a limited selection of unidentified fork spindles

Please send your old spindles or a good drawing and we will try to match them.

4MS FRONT FORK SPRING KSS/MSS £43.40

8M FRONT FORK SPRING, MAC/MOV Unpainted for your own finish £43.40

9M MUDGUARD BRACKET Top part only - mild steel £5.80

11/2M FORK BUSH 3/8 DIAMETER. £3.75

11MS FORK BUSH 7/16 DIAM £4.65

12MS FORK BUSH 1/2 DIAM £4.85


17/2F WEBB TOP SPIN H/W FORK KSS, MSS 1939 to 47. Top front and rear fitment. Single sided damper. Thick links. 7/16 dia x 8 1/2 long.

£20.00

17F H.WT. TOP SPINDLES KSS, MSS 1925 to 38. Top front and rear fitment. Single or double sided damper. Thin links. 7/16 dia x 8 3/16 long.

£20.00

19F 3/8 SPRING WASHER - SPINDLE For fork spindles £0.50

20F GIRDER FORK SPINDLE NUT 3/8 cycle thread and 0.71 A/F hex. Wider than 59/2P. - Hoping to reorder soon

£3.00

20/2M DAMPER FRICTION DISC M/MAC 39- MOV/MAC 39-46 £5.90

21M H/BAR BOLTS, RIGID, EACH Stainless £4.40

21M/B H/BAR BOLT RIGID Blackened H-T Steel - Hoping to reorder soon £1.25

22F KNURLED WASHER 7/16 I/D and 1.125 O/D £3.30

23M RUBBER BUFFER 1936-38 MOV/MAC For MOV/MAC 1935 to 38 and KSS MK2/rigid - Hoping

to reorder soonMSS

£2.00

27F WEBB BOTT SPIN H/WT FORK KSS, MSS 1925 to 36. Bottom front and rear fitment. Double sided damper. 1/2 dia x 9 11/16" long.

£22.50

27/2F WEBB BOT SPIN FRONT H/W FORK KSS MSS 1937 to 38. Bottom front fitment. Single sided damper. Thin links. 1/2 dia x 9 9/16" long.

£23.00

27/3F WEBB BOT SPIN REAR H/W FORK KSS MSS 1937 to 38. Bottom rear fitment. Single sided damper. Thin links. 1/2 dia x 8 3/4" long. - Hoping to reorder soon

£22.50

27/4F WEBB BOT SPIN FRONT H/W FORK MSS, KSS, KTS 1939-47. Bottom front fitment. Single sided damper. Thick links. 1/2 dia x 10 1/16" long.

£28.00

27/5F WEBB BOT SPIN REAR H/W FORK MSS, KSS, KTS 1939-47. Bottom rear fitment. Single sided damper. Thick links. 1/2 dia x 9 1/4" long.

£22.50

29F 1/2 SPRING WASHER - SPINDLE £0.50

30F GIRDER FORK SPINDLE NUT 1/2 cycle thread and 0.71 A/F hex. £3.00

31F 7/16 SPRING WASHER - SPINDLE For fork spindles £0.50

32F KNURLED WASHER 1/2 I/D and 1.25 O/D. £2.50

33F SHK ABS FRICT DISC. MK1 Single sided £6.75

33/2F SHK ABS FRICT DISC . MAC 40 ON £4.85

40F CROSS PIN , HANDLEBAR LUG KSS £6.60

40F/B CROSS PIN, H'BAR LUG KSS/MSS Blackened H-T Steel - Hoping to reorder soon £1.30

53P RIGID ST/HD DAMP NUT Hoping to reorder soon £15.95

55P 55P MOV 1933-40, MAC 1933-38, GTP. Top front and rear fitment. Single or double sided damper. 3/8 dia x 7 7/16" long. - Hoping to reorder soon

£11.25

55/2P WEBB TOP SPIN L/W FORK MOV 1946-47, MAC 1940-47 Top front and rear. Single sided damper. 7/16 dia x 7 1/2 long.

£4.90

57P GIRDER FORK SPINDLE NUT 3/8 cycle thread and 0.6 A/F hex. (Same as 70P ?) £3.00

57/2P GIRDER FORK SPINDLE NUT 7/16 cycle thread and 0.71 A/F hex. Wider than 73P. (Consider using as 28F and 18F?)

£3.00

58P KNURLED WASHER 3/8 I/D and 1.0 O/D £2.50

59P GIRDER FORK SPINDLE NUT 5/16 cycle thread and 0.6 A/F hex. £3.00

59/2P GIRDER FORK SPINDLE NUT 3/8 cycle thread and 0.71 A/F hex. £3.00

60P 5/16 SPRING WASHER - SPINDLE For fork spindles £0.50

62P DAMPER FRICTION DISC M/MAC 34- MOV, MAC 34-36 £5.90

72P KNURLED WASHER 7/16 I/D and 1.0 O/D. £2.50

73P GIRDER FORK SPINDLE NUT 7/16 cycle thread and 0.71 A/F hex. £3.00

75P BOT SPIN L/W EARLY MOV/MAC MOV 1933-36, MAC 1933-36, GTP to 1936. Bottom front and rear fitment. Double sided damper. 7/16 dia x 8 1/2 long.

£11.50

75/2P WEBB BOT SPIN L/W FORK MOV 1937-38, MAC 1937-38, GTP. Bottom front fitment. Single sided damper. Thin links. 7/16 dia x 9" long.

£11.50

75/3P WEBB L/WT BOT REAR S/DAMP MOV 1937-38, MAC 1937-38, GTP. Bottom rear fitment. Single sided damper. Thin links. 7/16 dia x 8 1/4 long.

£11.50

75/4P WEBB FORK SPINDLE - L'WT MOV 1939-47, MAC 1939-47. Bottom front fitment.

Single sided damper. Thick links. 7/16 dia x 9 1/2 long

£15.75

75/5P WEBB FORK SPINDLE - L'WT MOV 1939-47, MAC 1939-47. Bottom rear fitment. Single sided damper. Thick links. 7/16 dia x 8 3/4 long.

£15.75

VSL051 WEBB SPINDLE NUTS VARIOUS £1.90

VSL171 FRICT DISC BLANK 3.25 ROUND To make your own friction disk - Hoping to reorder soon £4.85


SPECIALS FROM VELOCE SPARES

ELECTRICAL

38ET MILLER REP T/LAMP S/A 6V BULB £14.00

H35 BEARING RETAINING PLATE £0.55

H37 DYNO THRU BOLTS SHORT £0.55

H41 BRUSH SPRING POS/NEG STATE? State whether for positive or negative £0.35

H46 BRASS TERMINAL EXTENSIONS £0.25

L564 LUCAS 564 REP. R/ LIGHT,12V £12.00

L564G LUCAS 564 GENUINE R/LIGHT, 12V Genuine Lucas £26.50

MT210 REPLICA LUCAS TAIL LIGHT Hoping to reorder soon £16.80

VSL060 LUCAS MAG CAP CHROME £3.30

VSL065A K1F PICKUP GASKET Hoping to reorder soon £0.45

VSL067A LUCAS SLIP RING £9.91

VSL070 MILLER REPLICA HEADLIGHT SWITC 3 Position dim-off-full £45.00

VSL073 MILLER REPL. HORN /DIP-SWITCH £12.50

VSL075 REPLICA MILLER AMMETER 2" £25.50

VSL075A RUBBER MOUNT'G RING FOR AMMET £0.50

VSL075D MILLER REPLICA 2" DEEP TYPE British made product £23.00

VSL076 MILLER REP.''STOP'' LIGHT,12V £19.95

VSL076L MILLER LENS, ROUND TAIL LIGHT This replica part fits the cicular "Stop" type rear light fitted to some of the rigid models, 2 1/2 ins diameter.

£5.95

VSL081 WIRING CABLE Available: Black, Blue, Brown, Red, Yellow, Green or

White - priced per yard

£0.55

VSL085 ATD SPRING MAC 498157 PAIR £1.35

VSL086 ATD SPR VM ETC 422243/S PAIR £1.35

VSL087 BRK LIGHT SWITCH PLATE S/S Stainless - Hoping to reorder soon £5.00

VSL087A BRK LT SWITCH PLATE MILD STEEL Plate blank to mount your own stop light switch. £3.30

VSL088 12 V 6 WATT SINGLE CONTACT £0.35

VSL089 BULB 12V 48/48 PRE-FOCUS Hoping to reorder soon £1.00

VSL089C BULB 12V 50/40 PRE-FOCUS £2.57

VSL090 6V 21/5W SBC BULB R.LIGHT £0.95

VSL090A BULB 6V 30/24 H/LIGHT £3.50

VSL090B 12V 21/5W STOP/TAIL BULB £0.45

VSL090C BULB PILOT MIN.B C 6V 3W £0.90

VSL090D BULB, 12V, 2.2W, SCREW IN £0.65

VSL090E 6V 5W REAR LIGHT BULB For rear light w/o stop light £0.70

VSL350 WIRING LOOM LUCAS PLASTIC £35.00

VSL351M WIRING LOOM. ORIG PATT MILLER. For Miller Dynamo combined with Miller switch, an exact replica of original in a plastic sheath, as were most but not all post-war models.

£38.00

VSL352 WIRING LOOM COIL PLASTIC For Coil Ignition system £38.00

VSL352A WIRING LOOM COIL BRAIDED For Coil Ignition system - Hoping to reorder soon £24.00

VSL391 REPLICA MILLER 6 1/2 H/L RIM Does not include sprung toggle fixing, see VSL393 £19.85

VSL392 REPLICA MILLER 7 INCH H/L RIM Does not include sprung toggle fixing, see VSL393 £19.85

VSL393 H LAMP RIM CLIP Replica in Stainless - complete set of parts for sprung toggle 'wing' clip

£10.95

VSL453 1 1/2 INCH REAR REFLECTOR Chromed bezel £6.20

VSL460 STOPLIGHT SWITCH Could replace Miller switch by modifying bracket £5.88

VSL462 BULB HOLDER FOR SMITHS CHRONOM £8.90

HANDLEBARS & GRIPS

VSL021 HANDLEBAR PUSH/PULL THROTTLE Stainless, Dull finish, requires polish or plate - FK61/4AS

equivalent £49.50

VSL022 HANDLEBAR MOV/MAC/GTP WEBB Stainless, bright finish but not polished - FK61/3 equivalent - Hoping to reorder soon

£31.00

VSL025 HANDLEBAR KSS Stainless, bright finish but not polished - FK61/6 equivalent

£29.00

VSL026 HANDLEBAR KTS/RIGID MSS Stainless, Dull finish, requires polish or plate - FK61/4 equivalent

£29.00

VSL027 H/BAR KTT Unplated steel - Hoping to reorder soon £31.00

VSL030 HANDLEBAR TELE FORKS STANDARD Stainless, bright finish but not polished - FK61/8

equivalent for all models with tele forks (including Dowty) - Hoping to reorder soon

£31.00

VSL114 HANDLE BAR RUBBERS, PLAIN 6 inch long, fits twistgrip side only £0.30


CONTROL & DRIVE CABLES

These control cables replace the Velocette originals for steel blade controls without adjusters.

If you have non-standard levers, please check that the cable dimensions are suitable before

attempting to fit them - damaged or modified cables cannot be exchanged or refunded

VSL122 FRONT BRAKE MOV/MAC 33-48 Front brake, Mac/Mov 1933-48 £16.00

VSL123 FRONT BRAKE TELES 49-52 Front brake, Mac telescopic fork 1949-52- please order VSL126 which is equivalent - Hoping to reorder soon

VSL125 FRONT BRAKE KSS 32-48 Front brake, KSS 1932-48 £21.50

VSL126 FRONT BRAKE ALL S/ARM 53 ON Front brake, all swing/arm 1953 on £15.00

VSL127 FRONT BRAKE VMT HEAVY DUTY Front brake, Thruxton, heavy duty type £15.60

VSL128 CLUTCH RIGID ADJ.UNDER TANK Clutch, rigids, mid adjuster under petrol tank £14.00

VSL129 CLUTCH S/ARM ADJ. UNDER TANK Clutch, swing/arm, mid adjuster under petrol tank £14.00

VSL130 CLUTCH S/A ADJ AT G.BOX Clutch, swing/arm, adjuster above gearbox £14.00

VSL131 MAGNETO BTH Magneto, advance/retard, BTH ( not competition mag) £11.50

VSL132 MAGNETO LUCAS Magneto, advance/retard, Lucas £15.00

VSL133 VALVE LIFTER BARREL NIPPLE Valve lifter, barrel shaped nipple at handlebar end £12.00

VSL133A VALVE LIFTER CABLE (SPECIAL) Barrel nipples at each end with angled tube to avoid cylinder fins, additional adjuster near handlebar end

£15.50

VSL134 VALVE LIFTER BALL NIPPLE Valve lifter, ball shaped nipple at handlebar end £13.00

VSL134A VALVE LIFTER CABLE (SPECIAL) Ball nipple at handlebar with angled tube to avoid cylinder

fins, additional adjuster near handlebar end - Hoping to reorder soon

£15.50

VSL135 THROTTLE 275/6 WITH MID-ADJUST Throttle, 275/6, mid adjuster, top hat at carb.(1/4" diameter nipple)

£7.50

VSL135A THROTTLE 275/6 Throttle, 275/6, adjuster in carb top & accessible mid adjuster (1/4" diameter nipple)

£9.75

VSL136 THROTTLE MONOBLOC Throttle, monobloc, accessible mid adjuster, top hat at carb. (1/4" diameter nipple)

£11.25

VSL136A THROTTLE MONOBLOC Throttle, monobloc,accessible mid adjuster, plain ferrule at carb. for adjuster in carb top (1/4" diameter nipple)

£9.95

VSL136C THROTTLE MONOBLOC Throttle, monobloc, mid adjuster, top hat at carb. (3/16"

diameter nipple)

£9.75

VSL137 THROTTLE CONCENTRIC Throttle, concentric, mid adjuster, top hat at carb. (3/16" diameter nipple)

£10.50

VSL137A THROTTLE CONCENTRIC Throttle, concentric, accessible mid adjuster, plain ferrule at carb. for adjuster in carb top (3/16" diameter nipple)

£10.50

VSL137B THROTTLE CONCENTRIC Throttle, concentric, accessible mid adjuster, top hat at carb. (1/4" diameter nipple)

£11.25

VSL137D THROTTLE CONCENTRIC Throttle, concentric, accessible mid adjuster, plain ferrule at carb. for adjuster in carb top. (1/4" diameter nipple)

£10.50

VSL141 CHOKE ALL CARBS MID-ADJ Choke, all, accessible mid adjuster, top hat at carb. £10.50

VSL142 CHOKE ALL CARBS ADJ IN CARB Choke, all, adjuster in carb top £10.50

VSL143 SPEEDO CHRONOMETRIC S/ARM Speedometer, chronometric, 5'-3" swing/arm £14.00

VSL144 SPEEDO MAGNETIC S/ARM Speedometer, magnetic, 5'-3" swing/arm £14.00

VSL145 SPEEDO CHRONOMETRIC RIGIDS Speedometer, chronometric 4'-8" rigids £12.50

VSL146 SPEEDO CHRONO FRONT WHEEL Speedometer, chronometric, front wheel, 2'-4", with spade

drive

£11.50

VSL147 TACHO CHRONOMETRIC Tachometer, chronometric, with spade drive £12.00

VSL148 TACHO MAGNETIC Tachometer, magnetic, with spade drive £12.00

VSL149 SPADE FOR VSL146, SPEEDO,CHRO £3.10

VSL180 CLUTCH CABLE BOOT- G/BOX END Waterproof gaiter for clutch cable at gearbox - Hoping to reorder soontower

£1.00

VSL181 SMALL CABLE GAITER Small universal rubber cable boot £0.50

GASKET SETS

VSL009 GASKET SET IRON MAC/MOV £18.00

VSL010 ALLOY MAC GASKET SET £19.50

VSL011 KSS MK2 GASKET SET £20.98

VSL012 VM/MSS GASK SET Includes reinforced rocker box gasket £26.00

VSL154 VIPER GASKET SET Includes reinforced rocker box gasket £20.40

VSL155 THRUXTON GASKET SET Includes reinforced rocker box gasket £24.00

VSL099 GASKET PAPER 0.25MM X A4 Cut your own unobtainable gaskets. £0.75


CARRIERS

VSL003 PANNIER FRAME Fits S/arm models only. See also pannier bags, VSL169 &

170 - priced per single side, please order L or R. £61.50

VSL003/SS PANNIER FRAME - STAINLESS As VSL003 but in Stainles Steel - Priced per Single Side £72.50

VSL004 CARRIER FOR 3.5G TANK For use on bikes with 3 1/2 gallon tank and standard pannier frames already fitted; unless you make your own support brackets

£37.00

VSL004/SS CARRIER FOR 3.5G TANK IN SS As VSL004 but in SS £45.00

VSL005 CARRIER FOR 4G TANK For use on bikes with 4 1/4 gallon tank and standard pannier frames already fitted; unless you make your own support brackets

£37.00

VSL005/SS CARRIER FOR 4 G TANK IN SS As VSL005 but in SS £45.00

DYNAMO TOOTHED BELT DRIVE CONVERSIONS

A range of engine pulleys, dynamo pulleys and belts which can be mixed and matched to

suit MOV, MAC, All MSS, VR, VM, VMT & KSS MkII and provide two dynamo speed options

for any of these models.

YOU NEED TO TELL US WHICH MODEL you want to fit the conversion to and whether

you want the dynamo to run at 1.1 x engine speed or 1.25 x engine speed.

Originally, MSS after engine number 12914, VR after 3605 and VM after 5049 probably had

larger dynamo pulleys (60w dynamo and longer belt E16/4) to give a slower dynamo speed.

Otherwise 36w dynamos can be run faster.

Items can be ordered separately, but for kits just tell us your Model and Speed choice

VSL380 ENG PULLEY 40T VM/MSS/VR/VMT All MSS/KSS/VM/VR - Hoping to reorder soon £38.45

VSL381 ENG PULLEY 40T MOV\MAC MAC/MOV £38.45

VSL382 DYNO PULLEY 32T For faster dynamo speed option £29.90

VSL383 DYNO PULLEY 36T For slower dynamo speed option £32.40

VSL384 TOOTHED BELT 90T For VSL381 + VSL382 £11.40

VSL385 TOOTHED BELT 95T For VSL381 + VSL383 OR VSL380 + VSL382 £11.80

VSL386 TOOTHED BELT 100T For VSL380 + VSL383 £12.30

VSL388 DYNO PULLEY 36T FOR 13 MM SHAFT Keywayed shaft for Alton alternator and Lucas Dynamo £35.40

FLEXIBLE PIPE & FITTINGS

VSL396 OIL PIPE 3/8 INCH BORE - RUBBER Black rubber (with specification printed along length),

proper fuel/oil resistant with thick reinforced walls- 11/16 inch O.D., priced per yard

£5.00

VSL397 OIL PIPE 5/16 INCH BORE - PLASTIC Clear PVC with braided reinforcement, 1/2 inch O.D., priced per yard

£2.10

VSL398 OIL PIPE 3/8 INCH BORE - PLASTIC Clear PVC with braided reinforcement, 5/8 inch O.D., priced per yard

£2.50

VSL399 OIL PIPE 5/16 INCH BORE - RUBBER Black rubber (with specification printed along length),

reinforced, proper fuel/oil resistant, 19/32 inch O.D., priced per yard

£4.50

VSL400 PET.PIPE 1/4 INCH BORE - PLASTIC Clear PVC with braided reinforcement, 15/32 inch O.D., priced per yard

£2.10

VSL401 FERRULE .41 INCH INSIDE For 3/8" Outside Diameter pipe £0.95


VSL403 UNION NUT 1/4 BSP Use with VSL408 £0.95


VSL406 FUEL TAP DOWTY WASHER Dowty washer 1/4" BSP £0.85

VSL408 STRAIGHT SPIGOT - 1/4 For 1/4" bore piping & petrol taps below, use with VSL403

£0.95

VSL409 SPIGOT ELBOW 1/4 BSP For petrol tap below, includes nut £4.60

VSL410 T-PIECE For 1/4" bore petrol pipe £4.20

VSL411 PETROL TAP 1/4 BSP PUSH/PUSH Brass nickel plated, Teflon coated with round knurled pull on fitted with filter

£25.00

VSL411A PETR0L TAP 1/4 BSP PUSH ON/OFF Hoping to reorder soon £18.40

VSL414 PETROL TAP 1/4 BSP LEVER TYPE Brass with round lever fitted with filter £26.75

VSL420 LEVER TYPE PETROL TAP Marked OFF/ON. Non-original, functional,die cast alternative tap with filter

£7.80

VSL421 LEVER TYPE PETROL TAP. RESERVE Marked OFF/RES. Non-original, functional,die cast alternative tap with filter.

£7.80


FASTENERS

VSL023 4 IN PLASTIC CABLE TIE £0.02

VSL079 5 1/2 IN PLASTIC TIE £0.03

VSL080 12" PLASTIC CABLE TIE £0.08

VSL024 15 IN PLASTIC CABLE TIE £0.12

VSL315 2BA X 1/2 LONG HEX HEAD SCREW Stainless - Hoping to reorder soon £0.50

VSL300 1/4 BSF X 3/8 HEX SCREW PLATED Plated £0.68

VSL316 1/4" BSF X 1/2" LONG HEX SCREW Stainless £1.20

VSL300A 1/4 BSF X 5/8 HEX SCREW PLATED Plated £0.68

VSL316A 1/4BSF X 3/4 LONG HEX SCREW Stainless - use as SL8/5 £1.30

VSL316B 1/4 BSF X 1 HEX BOLT Stainless £0.85

VSL301 1/4 BSF X 1 1/8 HEX BOLT PL Plated £0.25

VSL317 1/4" BSF X 1 1/4" HEX BOLT Stainless £1.30

VSL301A 1/4" BSF X 1 1/2" HEX BOLT Plated £0.25

VSL301B 1/4 BSF X 1 1/4 HEX BOLT PLATE Not high tensile. Zinc plated. £0.12



VSL316W 1/4 BSW X 1/2 SCREW Stainless £0.30

VSL322A 1/4 BSW X 1 HEX SCREW Stainless - use as SL8/16 or cut down for SL8/6 or SL8/22 - Hoping to reorder soon

£0.80

VSL322B 1/4 BSW X 1 1/4 HEX BOLT Stainless - use as SL8/17 £0.90

VSL322C 1/4 BSW X 1 3/4 HEX BOLT Stainless - use as SL8/21 £1.10

VSL321 5/16" BSF X 3/4" HEX SCREW Stainless £1.18

VSL302 5/16" BSF X 7/8" HEX BOLTS Plated £0.30

VSL302A 5/16 BSF X 1 1/4 HEX SCREW PL £0.30

VSL302B 5/16 BSF X 1 1/4 HEX SCREW Stainless - use as SL109/10 £2.70

VSL320 5/16" BSF X 1 1/2" HEX BOLT Stainless - use as SL9/22 £3.35

VSL324 5/16 BSF X 1 5/8 HEX BOLT Stainless - use as SL109/11 £1.95

VSL325 5/16 BSF X 2 HEX BOLT Stainless - use as SL109/6 £2.50


VSL327 5/16" BSF X 3" HEX BOLT Stainless - use as SL109/15 £3.37

VSL304 3/8" BSF X 1 1/4" BOLT Plated £0.40

VSL328 3/8 BSF X 1 1/4 HEX SCREW Stainless - use as SL110/2 £1.80


VSL329A 3/8 BSF X 2 HEX BOLT Stainless - use as SL110/4 and SL110/8 £2.50

VSL331 2BA NYLOC NUT £0.45

VSL332 2BA NUT Stainless £0.17

VSL332B 2BA NUT BRASS Brass £0.20

VSL330 3/16 WHIT NUT. PLATED. Plated - for rear light units £0.05

VSL333 1/4" BSF NUT Stainless £0.30

VSL334 1/4" BSF NYLOC NUT Stainless £1.80


VSL336 5/16" BSF NYLOC NUT Stainless £2.25

VSL337 5/16 CYCLE THREAD NUT Stainless - use as SL56/5 £0.95


VSL340 3/8 CYCLE THREAD NUT Stainless - use as SL56/8 £0.95

VSL341 7/16" BSF NUT Zinc plated £0.75

VSL341A 7/16 BSF NYLOC NUT Zinc plated £1.95

VSL343 2BA PLAIN WASHER Stainless £0.05

VSL343K 3/16 SHAKEPROOF WASHER Stainless £0.09

VSL354 3/16 PLAIN WASHER PLATED Plated £0.03

VSL335B 5/16 BSF CASTELLATED NUT Not plated. £0.15

VSL344 1/4 PLAIN WASHER Stainless £0.05

VSL353 1/4 SHAKEPROOF WASHER Plated £0.05

VSL344K 1/4 SHAKEPROOF WASHER Stainless - Hoping to reorder soon £0.09

VSL344L 1/4 SINGLE COIL LOCK WASHER Stainless £0.09

VSL344P 1/4" X 1" O/D WASHER Plated Mild Steel £0.06

VSL345 5/16" PLAIN WASHER Stainless £0.08

VSL309 5/16" SHAKEPROOF WASHER Plated £0.07

VSL345K 5/16 SHAKEPROOF WASHER Stainless - Hoping to reorder soon £0.02

VSL345L 5/16 SINGLE COIL LOCK WASHER Stainless £0.08

VSL310 3/8 FLAT WASHER PLATED Plated £0.08

VSL314 2BA X 7/8 CHEESE HD SCREW Mild steel. Not Plated. £0.10

VSL346 3/8 PLAIN WASHER Stainless £0.08


VSL346L 3/8 SINGLE COIL LOCKWASHER Stainless £0.20


VSL347 7/16" PLAIN WASHER Stainless £0.17


VSL347L 7/16 SINGLE COIL LOCKWASHER Stainless £0.25

VARIOUS

When ordering items such as fork spindles or nuts, it is well worth sending us a sample

VSL001 TOOLBOX KNOB ONLY Polished stainless steel but without securing washer - Hoping to reorder soon

£8.00

VSL007 PETROL TANK CAP £14.75

VSL008 OIL TANK CAP VENTED £14.00

VSL008A OIL TANK CAP NON VENTED £14.00

VSL013 REAR WHEEL DUST COV 3 HOLE Hub must be bare (no spokes) to fit £18.80

VSL014 SPACER TUBE FOR VSL 013 In stainless steel for use with new dust covers VSL 013 £3.50

VSL019 PAPER OIL FILTER KIT COMP Complete with element, fits all S/Arm models with no external modifications.

£32.50

VSL020 PAPER OIL FILTER ELEMENT £13.25

VSL036 F/MUDGUARD MOV/MAC/KTS/RIG MSS Replica of KA 16/5 in strong fibreglass. Not sent by mail

(except at your risk)

£50.00

VSL037 INTERNAL GEARBOX LINKAGE KIT Spherical rod-end joint kit. Fits all swing arm models - no mods necessary

£27.70

VSL039 REAR MUDGUARD TAILPIECE F/G MAC/MSS S/Arm equivalent to MAS85, in fibreglass for use with VSL041. Not sent by mail (except at your risk).

£12.00

VSL041 R/MUDGUARD MAC/MSS S/ARM F/G Equivalent to A15/19 in fibreglass, use tailpiece VSL039. Not sent by mail (except at your risk).

£38.50

VSL044 BRKT FOR REAR F/G M/GUARD Hoping to reorder soon £4.90

VSL052 DAMPER NUTS Send us a drawing in case we can match what you need £4.90

VSL094 BRASS CAGE LESS ROLLERS Replaces MAS57, requires 14 of rollers VSL095. Laser cut for accuracy; some roller slots will require slight scraping or filing to remove heat splatter and laser entry

ridge.

£7.95

VSL095 3/16 X 3/16 ROLLERS For use in VSL094 £0.16

VSL098 LUGS FOR PR. CH/CASE BAND Bare casting, priced in units of one £2.30

VSL103 EXCHANGE BRAKE SHOES Only available at Huncote counter, not by mail order - your old shoes must be a pair, in good condition and with undamaged bearing surfaces.

£28.80

VSL107 5/8 X 3/8 1 1/2 LINK Two links, one with cranked plates to give 'two inners' £3.50

VSL108 5/8 X 3/8 JOINING LINK £2.50

VSL110 1/2 X 5/16 1 1/2 LINK Two links, one with cranked plates to give 'two inners' £4.00

VSL111 1/2 X 5/16 JOINING LINK £2.00

VSL115 SLEEVE GEAR NUT TOOL £19.75

VSL116 MAIN SADDLE SPRINGS PAIR For rigid models £32.00

VSL117 FLEXIBLE MOUNTINGS Hoping to reorder soon £0.30

VSL150 CLUTCH FRICTION PLATE Hoping to reorder soon £12.90

VSL151 CLUTCH PLAIN PLATE £7.25

VSL152 CLUTCH CHAINWHEEL For 9-plate clutches - Hoping to reorder soon £130.00

VSL153 CLUTCH CHAINWHEEL For 7 plate clutches. Uses VSL150 & VSL151 plates. £130.00

VSL157 BRKT FOR FRT F/G M/GUARD £3.50

VSL164 BRG.TAPER ROLLER STRG.HD.TOP i.e. Replaces LE532 + F32/3 + 19xK100 - S/Arm only £24.75

VSL165 BRG.TAPER ROLLER STRG.HD.BOTTO As VSL 164 but with centre ground out to correct

diameter of lower stem and so replace F32/4 - S/Arm only

£45.00

VSL361 REAR CHAIN ADJUSTMENT STRAP For correct chain adjustment-made in stainless steel £5.00

VSL364 GLAND NUT SPANNER For OHC vert shaft housing nuts £7.00

VSL454 EXHAUST PIPE CLAMP 2 INCH Band and trunnion type, clamps 2" diameter - Hoping to reorder soon

£9.00

VSL457 EXHAUST PIPE CLAMP 1.3/4 INCH Band and trunnion type, clamps 1.75" diameter. £9.00

VSL461 7 INS LYCETT TYPE MATTRESS SPR Tapered at one end for the front of saddle. £3.90

owners club sales list - veloce spares · pdf fileowners club sales list veloce spares ltd....

Documents