owner’s manual - hearth n home...this pellet burning appliance has been tested and listed for use...
TRANSCRIPT
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/161 3-90-09730c
INSTALLER: Leave this manual with party responsible for use and operation.OWNER: Retain this manual for future reference.Contact your local dealer with questions on installation, operation or service.
Please read this entire manual before installation and use of this pellet fuel-burning room heater. Failure to follow these instructions could result in property damage, bodily injury or even death.
• Donotstoreorusegasolineorotherflammablevaporsandliquidsinthevicinityofthisoranyotherappliance.
• Donotoverfire-Ifanyexternalpartstartstoglow,youareoverfiring.Reducefeedrate.Overfiringwillvoidyourwarranty.
• Complywithallminimumclearancestocombustiblesasspecified.Failuretocomplymaycausehousefire.
Checkbuildingcodespriortoinstallation.• InstallationMUSTcomplywithlocal,regional,stateand
nationalcodesandregulations.• Contactlocalbuildingorfireofficialsaboutrestrictions
andinstallationinspectionrequirementsinyourarea.
Testedandapprovedforwoodpelletsonly.Burningofanyothertypeoffuelvoidsyourwarranty.
Hot glass will cause burns.• Donottouchglassuntilitiscooled• NEVERallowchildrentotouchglass• Keepchildrenaway• CAREFULLYSUPERVISEchildreninsameroomas
stove.• Alertchildrenandadultstohazardsofhightemperatures. High temperatures may ignite clothing or other
flammable materials.• Keepclothing,furniture,draperiesandotherflammable
materialsaway.
HOT SURFACES!
Glassandother surfacesarehotduringoperationANDcooldown.
To obtain a French translation of thismanual, pleasecontactyourdealerorvisitwww.harmanstoves.com
Pourobtenirunetraductionfrançaisedecemanuel,s’ilvous plaît contacter votre revendeur ou visitezwww.harmanstoves.com
NOTE
WARNING
WARNING
Owner’s ManualCare and Operation
Model(s):Advance Freestanding Pellet Stove
NOTICE: SAVE THESE INSTRUCTIONS
CAUTION!
CAUTION!
AdvanceUse&CareVideo
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/162 3-90-09730c
Listing Label Information/Location
A. CongratulationsCongratulationsonselectingaHarman®FreestandingPelletStove.TheHarman®Advancepelletstoveyouhaveselectedisdesignedtoprovide theutmost insafety, reliability,andefficiency.Astheownerofanewpelletstove,you’llwanttoreadandcarefullyfollowalloftheinstructionscontainedinthisowner’smanual.Payspecialattentiontoallcautionsandwarnings.
Thisowner’smanual shouldberetainedforfuturereference.We suggest that you keep it with your other importantdocumentsandproductmanuals.YournewHarman®AdvanceFreestandingPelletStovewillgiveyouyearsofdurableuseandtrouble-freeenjoyment.WelcometotheHarman®family!
Themodelinformationregardingyourspecificstovecanbefoundontheratingplateusuallylocatedinthecontrolareaofthestove.
Read this manual before operating this appliance. Please retain this Owner’s Manual for future reference.
Read the Installation Manual before making any installation or finishing changes.
1 Welcome
Brand: ________________________________________________ ModelName: ___________________________
SerialNumber: __________________________________________ DateInstalled: __________________________
Appliance Information:
Local Dealer InformationDEALER: Fill in your name, address, phone and email information here and appliance information below.
DealerName:________________________________________________________
Address:____________________________________________________________
____________________________________________________________
Phone:_____________________________________________________________
Email:______________________________________________________________
Entrée Max Note: £ 5,7 carburant/hÉmissions certifiés EPA: 1,8 g/hNote électrique: 240 VAC, 50 Hz, 2,6 AMPS Lancer, Exécuter 2,0 AMPSUS Note électrique: 115 VAC, 60 Hz, Start 4,2 AMPS, Run 2,8 AMPSCaution: The combustion air opening must not be obstructed.Attention: Les ouvertures d’air de combustion ne doit pas être obstruée.Ne faites pas obstacle l’espace sous le réchauffeur. toujours fournir un approvisionnement suffisant en air frais jusqu’au lieu d’installation applaince.Tenir la porte frontale et le couvercle de trémie hermétiquement clos durant le fonctionnement de l’appareil.
MODEL / MODÈLE: “Advance”Room Heater Pellet Fuel-Burning Type
SUITABLE FOR MOBILE-HOME INSTALLATIONThis pellet burning appliance has been tested and listed for use in
Manufactured Homes In accordance with OAR 814-23-900 through 814-23-909
BARCODE LABEL008Serial No.No de série:
Made in U.S.A. of US and imported parts. / Fabriqué aux États-Unis-d’Amérique par des pièces d’origine américaine et pièces importées.
Rev G3-90-08732
US ENVIRONMENTAL PROTECTION AGENCYCertified to comply with 2015 particulate emission standards. Not approved for sale after May 15, 2020.Certifié conforme aux normes 2015 d’émission de particules. Non approuvé pour la vente après le 15 mai 2020.
Input Rating Max: 5.7 lb. fuel/hrEPA Certified Emissions: 1.8 g/hrElectrical Rating: 240 VAC, 50 Hz, Start 2.6 AMPS, Run 2.0 AMPSU.S. Electrical Rating: 115 VAC, 60 Hz, Start 4.2 AMPS, Run 2.8 AMPS
MINIMUM CEARANCES TO COMBUSTIBLES/DISTANCE DE SECURITE PAR RAPPORT AUX MATERIAUX COMBUSTIBLES:Back Wall / Entre Mur Arrière 1” (25mm)Side Wall / Entre Paroi Latérale 10" (254mm)Corner Installation / En AngleWalls to Appliance 7” (178mm)Entre Murs et AppareilFloor Protection/Protection du Plancher USA CANADASides/Côtés (A) 6” 152mmBack/Arrière (B) 1” 25mmFront/Avant (C) 6” 152mmUse a non-combustible floor protector extending under and to the sides, front and back of the unit as shown in floor protection diagram. Measure front distance from the surface of the glass door.Recommended: Non-combustible floor protection extended beneath the fluepipe when installed with horizontal venting.
A
C
B
Floor protector
7"178mm
7"178m
m 10"254m
m
1"26mm
Floor Protection
Floor Protection
Floor Protection
Report #/Rapport #135-S-19-2, 135-S-19b-6.2Test to/testé à: ASTM E 2779-10, ASTEM E 2515-11, ASTM E 1509-04, ULC/ORD-C1482-M1990, ULC-S627-00, EPA Method 28RRoom Heater, Pellet Fuel-Burning Type, Also For Use In Mobile Homes. (UM) 84-HUD“PREVENT HOUSE FIRES” Install and use only in accordance with manufactures installation and operation instructions.This wood heater needs periodic inspection and repair for proper operation. Consult the owner’s manual for further information. It is against federal regulations to operate this wood heater in a manner inconsistent with the operating instructions in the owner’s manual.Contact local building or fire officials about restrictions and installation inspection in your area.WARNING: FOR MANUFACTURED HOMES: Do not install appliance in a sleeping room. An outside combustion air inlet must be provided. The structural integrity of the manufactured home floor, ceiling and walls must be maintained.Refer to manufacturer’s instructions and local codes for precautions required for passing chimney through a combustible wall or ceiling. Inspect and clean exhaust venting system frequently in accordance with manufacturer’s instructions.Use a 3” or 4” diameter type “L” or “PL” venting system.Do not connect this unit to a chimney flue servicing another appliance.Do not obstruct the space beneath the heater.FOR USE WITH PELLETIZED WOOD FUEL ONLY.Fuel Type: Wood PelletsRoute power cord away from unit.OPERATE ONLY WITH DOORS CLOSEDDANGER: Risk of Electrical Shock. Disconnect Power Before Servicing Unit.For Further Instruction refer to Installation and Owner’s Manual.Replace glass only with 5mm mirrored ceramic available from your dealer.DO NOT REMOVE THIS LABEL / NE PAS ENLEVER CETTE ÉTIQUETTE
Test pour / tested à: ASTM E 2779-10, ASTEM E 2515-11, ASTM E 1509 à 1504, ULC / ORD-C1482-M1990, ULC-S627-00, EPA Method 28RAppareil de chauffage à granulés (UM) 84- HUD"Empêcher MAISON incendies" Installer et utiliser uniquement en conformité avec les instructions du fabricant d'installation et d'exploitation.Ce poêle à bois doit inspection périodique et la réparation pour un fonctionnement correct. Consultez le manuel du propriétaire pour plus d'informations. Ce est contre les règlements fédéraux pour faire fonctionner ce poêle à bois d'une manière incompatible avec les instructions d'utilisation dans le manuel du propriétaire.Contactez le service des incendies à propos des restrictions et l'inspection d'installation dans votre région.AVERTISSEMENT: POUR maisons préfabriquées: Ne pas installer l'appareil dans une chambre à coucher. Une entrée d'air de combustion à l'extérieur doit être fournie. L'intégrité structurale de la maison étage, plafond et murs fabriqués doit être maintenue.Reportez-vous aux instructions du fabricant et les codes locaux pour les précautions nécessaires pour faire passer la cheminée à travers un mur ou un plafond combustible. Inspectez et nettoyez système d'évacuation souvent en conformité avec les instructions du fabricant.Utilisez un "ou 4" Type de diamètre «L» 3 ou le système de ventilation "PL".Ne pas connecter cet appareil à un conduit de cheminée desservant un autre appareil.Ne pas obstruer l'espace sous le chauffe-eau.À UTILISER AVEC LA GRANULE DE BOIS SEULEMENT.Type de carburant: granulés de bois.Route cordon électrique de l'appareil.Fonctionner uniquement avec les portes ferméesDANGER: Risque de choc électrique. Débranchez l'alimentation avant l'Unité des services.Pour de plus amples instructions, reportez-vous à l'installation et le manuel du propriétaire.Remplacer le verre seulement avec 5mm miroir en céramique disponibles chez votre revendeur.
352 Mountain House RoadHalifax, PA 17032
ECO: 79668
PART # / REV: 3-90-008732_RevG
ORIGINATOR: SpidleT
DATE: 02/16
LABEL SIZE: 5.25” H x 11.5” W
LOCATION: Rear Top
CLASS:
ADHESIVE: 486
MATERIAL: METAL
INK: BLACK
OVERCOAT:
LABEL TICKET
Corners .062
Date of Manufacture / Date de fabrication:2016 2017 2018 JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
Manufactured by / Fabriqué par: Hearth and Home Technologies 352 Mountain House Road, Halifax PA 17032
SerialNumberModelName
EXAMP
LE
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/163 3-90-09730c
TABLE OF CONTENTS
Safety Alert Key:• DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury.• WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury.• CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.• NOTICE: Used to address practices not related to personal injury.
!
6 Troubleshooting and Frequently Asked Questions A. ErrorCodeDescription. . . . . . . . . . . . . . . . . . . . . . . . . . . 24B. FrequentlyAskedQuestions . . . . . . . . . . . . . . . . . . . . . . 24C. Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
7 Reference Materials A. SafetyReminders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26B. MotorandComponentLocation. . . . . . . . . . . . . . . . . . . . 27C. LossofPowerAddendum . . . . . . . . . . . . . . . . . . . . . . . . 28D. EmergencyManualIgnition. . . . . . . . . . . . . . . . . . . . . . . 28E. ContactInformation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
= Contains updated information
1 Welcome A. Congratulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2B. LimitedLifetimeWarranty. . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 Product Specific and Important Safety Information A. ApplianceCertification. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6B. MobileHomeApproved. . . . . . . . . . . . . . . . . . . . . . . . . . . 6C.GlassSpecifications(Ceramic) . . . . . . . . . . . . . . . . . . . . . 6D. ElectricalRating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6E. BTU&EfficiencySpecifications. . . . . . . . . . . . . . . . . . . . . 7
3 General Information A. ApplianceSafety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8B. ClearSpace. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8C.ControlExplanation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9D. FuelSpecification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10E. GeneralOperatingInformation. . . . . . . . . . . . . . . . . . . . . 11
4 Operating Instructions A. StartingYourFirstFire. . . . . . . . . . . . . . . . . . . . . . . . . . . 12B. FireCharacteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12C. FeedRateAdjustmentInstructions . . . . . . . . . . . . . . . . . 12D. IgnitionCycles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13E. AutomaticIgnition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14F. DisabledIgnition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5 Maintenance and Service A. ProperShutdownProcedure. . . . . . . . . . . . . . . . . . . . . . 16B. QuickReferenceMaintenanceChart. . . . . . . . . . . . . . . . 16C.GeneralMaintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16D.GlassMaintenance..............................17E. AshPanRemoval...............................18F. BurnpotMaintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . 19G.BrickPanelRemoval . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20H.HeatExchanger. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21I. CombustionBlowerChamber . . . . . . . . . . . . . . . . . . . . . 22J. PelletFeederChamber . . . . . . . . . . . . . . . . . . . . . . . . . . 23
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/164 3-90-09730c
4021-645F02-18-13 Page1of2
Hearth & Home TechnologiesLIMITED LIFETIME WARRANTY
Hearth&HomeTechnologies,onbehalfofitshearthbrands(”HHT”),extendsthefollowingwarrantyforHHTgas,wood,pellet,coalandelectrichearthappliancesthatarepurchasedfromanHHTauthorizeddealer.
WARRANTY COVERAGE:HHTwarrantstotheoriginalowneroftheHHTapplianceatthesiteofinstallation,andtoanytransfereetakingownershipoftheapplianceatthesiteofinstallationwithintwoyearsfollowingthedateoforiginalpurchase,thattheHHTappliancewillbefreefromdefectsinmaterialsandworkmanshipatthetimeofmanufacture.Afterinstallation,ifcoveredcompo-nentsmanufacturedbyHHTarefoundtobedefectiveinmaterialsorworkmanshipduringtheapplicablewarrantyperiod,HHTwill,atitsoption,repairorreplacethecoveredcomponents.HHT,atitsowndiscretion,mayfullydischargeallofitsobligationsundersuchwarrantiesbyreplacingtheproductitselforrefundingtheverifiedpurchasepriceoftheproductitself.Themaximumamountrecoverableunderthiswarrantyislimitedtothepurchasepriceoftheproduct.Thiswarrantyissubjecttoconditions,exclusionsandlimitationsasdescribedbelow.
WARRANTY PERIOD:Warrantycoveragebeginsonthedateoforiginalpurchase.Inthecaseofnewhomeconstruction,warrantycoveragebeginsonthedateoffirstoccupancyofthedwellingorsixmonthsafterthesaleoftheproductbyanindependent,authorizedHHTdealer/distributor,whicheveroccursearlier.Thewarrantyshallcommencenolaterthan24monthsfollowingthedateofproductshipmentfromHHT,regardlessoftheinstallationoroccupancydate.Thewarrantyperiodforpartsandlaborforcoveredcomponentsisproducedinthefollowingtable.Theterm“LimitedLifetime”inthetablebelowisdefinedas:20yearsfromthebeginningdateofwarrantycoverageforgasappliances,and10yearsfromthebeginningdateofwarrantycoverageforwood,pellet,andcoalappliances.Thesetimeperiodsreflecttheminimumexpectedusefullivesofthedesignatedcomponentsundernormaloperatingconditions.
Seeconditions,exclusions,andlimitationsonnextpage.
Parts Labor Gas Wood Pellet EPAWood Coal Electric Venting
X X X X X X X
AllpartsandmaterialexceptascoveredbyConditions,
Exclusions,andLimitationslisted
X X X Igniters,electroniccomponents,and glassX X X X X Factory-installedblowers
X Moldedrefractorypanels
X Firepotsandburnpots
5years 1year X X Castingsandbaffles
7years 3years X X X Manifoldtubes,HHTchimneyandtermination
10years 1year X Burners,logsandrefractory
LimitedLifetime 3years X X X X X Fireboxandheatexchanger
X X X X X X X Allreplacementpartsbeyondwarrantyperiod
WarrantyPeriod HHTManufacturedAppliancesandVenting
1Year
ComponentsCovered
3years
2years
90Days
B. Limited Lifetime Warranty
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/165 3-90-09730c
4021-645F02-18-13 Page2of2
WARRANTY CONDITIONS:• ThiswarrantyonlycoversHHTappliancesthatarepurchasedthroughanHHTauthorizeddealerordistributor.Alistof
HHTauthorizeddealersisavailableontheHHTbrandedwebsites.• ThiswarrantyisonlyvalidwhiletheHHTapplianceremainsatthesiteoforiginalinstallation.•ThiswarrantyisonlyvalidinthecountryinwhichtheHHTauthorizeddealerordistributorthatsoldtheappliance
resides.• Contactyourinstallingdealerforwarrantyservice.Iftheinstallingdealerisunabletoprovidenecessaryparts,contact
thenearestHHTauthorizeddealerorsupplier.Additionalservicefeesmayapplyifyouareseekingwarrantyservicefromadealerotherthanthedealerfromwhomyouoriginallypurchasedtheproduct.
• Checkwithyourdealerinadvanceforanycoststoyouwhenarrangingawarrantycall.Travelandshippingchargesforpartsarenotcoveredbythiswarranty.
This warranty is void if:• Theappliancehasbeenover-firedoroperatedinatmospherescontaminatedbychlorine,fluorine,orotherdamaging
chemicals.Over-firingcanbeidentifiedby,butnotlimitedto,warpedplatesortubes,rustcoloredcastiron,bubbling,crackinganddiscolorationofsteelorenamelfinishes.
• Theapplianceissubjectedtoprolongedperiodsofdampnessorcondensation.• Thereisanydamagetotheapplianceorothercomponentsduetowaterorweatherdamagewhichistheresultof,but
notlimitedto,improperchimneyorventinginstallation.
LIMITATIONS OF LIABILITY:• Theowner’sexclusiveremedyandHHT’ssoleobligationunderthiswarranty,underanyotherwarranty,expressor
implied,orincontract,tortorotherwise,shallbelimitedtoreplacement,repair,orrefund,asspecifiedabove.InnoeventwillHHTbeliableforanyincidentalorconsequentialdamagescausedbydefectsintheappliance.Somestatesdonotallowexclusionsorlimitationofincidentalorconsequentialdamages,sotheselimitationsmaynotapplytoyou.Thiswarrantygivesyouspecificrights;youmayalsohaveotherrights,whichvaryfromstatetostate.EXCEPTTOTHEEXTENTPROVIDEDBYLAW,HHTMAKESNOEXPRESSWARRANTIESOTHERTHANTHEWARRANTYSPECIFIEDHEREIN.THEDURATIONOFANYIMPLIEDWARRANTYISLIMITEDTODURATIONOFTHEEXPRESSEDWARRANTYSPECIFIEDABOVE.
WARRANTY EXCLUSIONS:Thiswarrantydoesnotcoverthefollowing:• Changesinsurfacefinishesasaresultofnormaluse.Asaheatingappliance,somechangesincolorofinteriorand
exteriorsurfacefinishesmayoccur.Thisisnotaflawandisnotcoveredunderwarranty.• Damagetoprinted,plated,orenameledsurfacescausedbyfingerprints,accidents,misuse,scratches,melteditems,
orotherexternalsourcesandresiduesleftontheplatedsurfacesfromtheuseofabrasivecleanersorpolishes.• Repairorreplacementofpartsthataresubjecttonormalwearandtearduringthewarrantyperiod.Theseparts
include:paint,wood,pelletandcoalgaskets,firebricks,grates,flameguides,batteriesandthediscolorationofglass.• Minorexpansion,contraction,ormovementofcertainpartscausingnoise.Theseconditionsarenormalandcom-
plaintsrelatedtothisnoisearenotcoveredbythiswarranty.• Damagesresultingfrom:(1)failuretoinstall,operate,ormaintaintheapplianceinaccordancewiththeinstallation
instructions,operatinginstructions,andlistingagentidentificationlabelfurnishedwiththeappliance;(2)failuretoinstalltheapplianceinaccordancewithlocalbuildingcodes;(3)shippingorimproperhandling;(4)improperopera-tion,abuse,misuse,continuedoperationwithdamaged,corrodedorfailedcomponents,accident,orimproperly/incorrectlyperformedrepairs;(5)environmentalconditions,inadequateventilation,negativepressure,ordraftingcausedbytightlysealedconstructions,insufficientmake-upairsupply,orhandlingdevicessuchasexhaustfansorforcedairfurnacesorothersuchcauses;(6)useoffuelsotherthanthosespecifiedintheoperatinginstructions;(7)installationoruseofcomponentsnotsuppliedwiththeapplianceoranyothercomponentsnotexpresslyauthorizedandapprovedbyHHT;(8)modificationoftheappliancenotexpresslyauthorizedandapprovedbyHHTinwriting;and/or(9)interruptionsorfluctuationsofelectricalpowersupplytotheappliance.
• Non-HHTventingcomponents,hearthcomponentsorotheraccessoriesusedinconjunctionwiththeappliance.• Anypartofapre-existingfireplacesysteminwhichaninsertoradecorativegasapplianceisinstalled.• HHT’sobligationunderthiswarrantydoesnotextendtotheappliance’scapabilitytoheatthedesiredspace.Informa-
tionisprovidedtoassisttheconsumerandthedealerinselectingtheproperappliancefortheapplication.Consider-ationmustbegiventoappliancelocationandconfiguration,environmentalconditions,insulationandairtightnessofthestructure.
B. Limited Lifetime Warranty (continued)
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/166 3-90-09730c
2 Product Specific and Important Safety Information A. Appliance Certification
C. Glass SpecificationsThis appliance is equipped with 5mm mirrored ceramicglass.Replaceglassonlywith5mmceramicglass.Pleasecontactyourdealerforreplacementglass.
D. Electrical Rating120VAC,60Hz,Start4.2Amps,Run2.8AmpsNOTE: Some generator or battery back-up systems may not be compatible with the micro-processor electronics on this appliance. Please consult the power supply manufacturer for compatible systems.
T H E S T R U C T U R A L I N T E G R I T Y O F T H E MANUFACTURED HOME FLOOR, WALL, AND CEILING/ROOF MUST BE MAINTAINED.
DO NOT INSTALL IN SLEEPING ROOM.
WARNING!
The Advance is Certified to comply with2015 particulate emission standards. NotapprovedforsaleafterMay15,2020.
NOTE: Thisinstallationmustconformwithlocalcodes.In the absence of local codes youmust complywiththe ASTM E1509-2004, ULC-S627-00, ULC/ORD-C-1482-M1990, (UM) 84-HUD
MODEL: AdvancePelletStoveLABORATORY: OMNITestLaboratories,IncREPORT NO. 135-S-19b-6.2TYPE: PelletFueled/SupplementaryFor
ResidentialUseSTANDARD(s): ASTME1509-04,ULC/ORD-
C1482-M1990,ULC-S627-00,ASTME2779-10,ASTME2515-11
B. Mobile Home ApprovedThis appliance is approved formobile home installationswhennotinstalledinasleepingroomandwhenanoutsidecombustionairinletisprovided.Thestructuralintegrityofthemobilehomefloor,ceiling,andwallsmustbemaintained.Theappliancemustbeproperlygroundedtotheframeofthemobilehomeanduseonlylistedpelletvent,Class“PL”connectorpipe.AHarman®OutsideAirKitmustbeinstalledinamobilehomeinstallation.
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/167 3-90-09730c
EPA Certified Emissions: 1.82g/hr*LHV Tested Efficiency: 78%**HHV Tested Efficiency: 67.4%***EPA BTU Output: 5,400-29,500****BTU Input 9,100-48,100Vent Size: 3InchHopper Capacity: 60lbsFuel WoodPellet
E. BTU & Efficiency Specifications
NOTE: Hearth&HomeTechnologies,manufacturer ofthisappliance,reservestherighttoalteritsproducts,theirspecificationsand/orpricewithoutnotice.
BTUoutputwill vary,dependingon thebrandof fuel youuseinyourappliance.ConsultyourHarman®dealerforbestresults.WARNING! Risk of Fire! Hearth & Home Technologies disclaims any responsibility for, and the warranty and agency listing will be voided by the below actions.DO NOT: • Install or operate damaged appliance • Modify appliance • Install other than as instructed by Hearth & Home
Technologies • Operate the appliance without fully assembling all
components • Overfire • Install any component not approved by Hearth &
Home Technologies • Install parts or components not Listed or approved. • Disable safety switchesImproper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Forassistanceoradditionalinformation,consultaqualifiedinstaller, service agency or your dealer.
Harman® is a registered trademark of Hearth & HomeTechnologies.
*WeightedaverageLHVefficiencyusingdatacollectedduring EPA emissions test.**WeightedaverageHHVefficiencyusingdatacollectedduring EPA emissions test.***ArangeofBTUoutputsbasedonEPADefaultEfficiencyand the burn rates from the low and high EPA tests.****Based on the maximum feed rate per hour multiplied by approximately 8,600 BTU’s which is the average BTU’s from a pound of pellets.Thiswoodheaterneedsperiodicinspectionandrepairforproperoperation.Itisagainstfederalregulationstooperatethiswoodheater in amanner inconsistentwith operatinginstructionsinthismanual.
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/168 3-90-09730c
If you expect that small children or vulnerable adultsmay come into contact with this appliance, the followingprecautionsarerecommended:• Installaphysicalbarriersuchas: - Adecorativefirescreen. - Adjustablesafetygate.• Install a switch lock or awall/remote controlwith childprotectionlockoutfeature.
• Keepremotecontrolsoutofreachofchildren.• Never leave children alone near a hot stove,whetheroperatingorcoolingdown.
• TeachchildrentoNEVERtouchthestove.• Considernotusingthestovewhenchildrenwillbepresent.• Use only specified components as replacement parts.Othercomponentsmaynotallowyourstovetooperateasitwasintended.
Contact your dealer for more information, or visit: www.hpba.org/safety-information.Topreventunintendedoperationwhennotusingyourstoveforanextendedperiodoftime(summermonths,vacations,trips,etc):• Unplugstovefromreceptacle.
A. Appliance SafetyWARNING! DO NOT operate stove before reading and understanding operating instructions. Failure to operate stove according to operating instructions could cause fire or injury.
3 General Information
B. Clear SpaceWARNING! RISK OF FIRE! Do NOT place combustible objects in front or to the sides of the appliance. High temperatures may ignite clothing, furniture or draperies.Mantel: Avoid placing candles and other heat-sensitiveobjectsonmantelorhearth.Heatmaydamagetheseobjects.NOTICE: Clearances may only be reduced by means approved by the regulatory authority having jurisdiction.WARNING! RISK OF FIRE! Keep combustible materials, gasolineandother flammable vaporsand liquids clear ofappliance.• Do NOT store flammable materials in the appliance’s
vicinity.• Do NOT use gasoline, lantern fuel, kerosene, charcoal
lighterfluidorsimilarliquidstostartor“freshenup”afirein this heater.
Keep all such liquids well away from the heater while it is in use as combustible materials may ignite.
HOT SURFACES!GlassandothersurfacesarehotduringoperationANDcooldown.
Hot glass will cause burns.• DO NOTtouchglassuntilitiscooled• NEVERallowchildrentotouchglass• Keepchildrenaway
• CAREFULLYSUPERVISEchildreninsameroomasstove.• Alertchildrenandadultstohazardsofhightemperatures.
High temperatures may ignite clothing or other flammable materials.• Keep clothing, furniture, draperies and other flammablematerialsaway.
WARNING!
WARNING!THIS WOOD HEATER HAS A MANUFACTURER-SET MINIMUM LOW BURN RATE THAT MUST NOT BE ALTERED. IT IS AGAINST FEDERAL REGULATIONS TO ALTER THIS SETTING OR OTHERWISE OPERATE THIS WOOD HEATER IN A MANNER INCONSISTENT WITH OPERATING INSTRUCTIONS IN THIS MANUAL.
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/169 3-90-09730c
Feed limitSets the maximum feed rate
TestRuns all motors at full speed for one minute to check operation. A f t e r w a r d s t h e control will simulate a minimum burn with the combustion blower remaining on low.
Distribution Blower speed ad jus tment range.
L = lowH = high
Temperature DialAllows you to adjust the room temperature setting, in Room Temp Mode, using the outer scale marked in degrees Fahrenheit. It also allows you to adjust the constant burn setting, while in Constant burn Mode, using the inner scale marked from 1 to 7.
Mode Selector Allows you to choose between Room Temp Mode, Constant burn Mode, or OFF. Also allows you to vary the distribution blower speed by turning the knob to the high or low side of each mode.
Power LightIndicates power to the control.
Indicates power to the feed motor.
Indicates power to combustion blower
Status LightWill be lit in either stove or room temp mode when pointer is not within off position band except after normal shut down. Blinks to indicate errors listed below.
Indicates power to distribution blower.
Dealer Diagnostic PortFor dealer maintenance only. Requires special DDM monitor supplied to Harman® Dealers exclusively.
Indicates igniter is on.
Igniter switchSet to appropr iate Start-Up mode.
C. Control Explanation
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1610 3-90-09730c
NOTICEHearth&HomeTechnologiesisnotresponsibleforstoveperformanceorextramaintenancerequiredasaresultofusingfuelwithhigherashormineralcontent.
Size• Pellets are either 1/4 inch or 5/16 inch (6-8mm) in
diameter• Lengthshouldbenomorethan1-1/2inches(38mm)• Pellet length can vary from lot to lot from the same
manufacturer.Performance• Higherashcontentrequiresmorefrequentmaintenance.• “Premium” grade pelletswill produce the highest heat
output.• Burning pellets longer than 1-1/2 inches (38mm) can
causeinconsistentfeedingand/orignition.
Werecommendthatyoubuyfuelinmulti-tonlotswheneverpossible. However, we do recommend trying differentbrands prior to purchasing multi-ton lots, to ensure yoursatisfaction.
CAUTION! Tested and approved for use with wood pellets ONLY. Burning of any other fuel will void your warranty.
Storage• Woodpelletsshouldbeleft intheiroriginalsealedbag
untilreadytouse,topreventmoisture.• Donotstorefuelwithinthespecifiedclearanceareas,or
inalocationthatwillinterferewithroutinecleaningandmaintenanceprocedures.
D. Fuel SpecificationsFuel and Fuel StoragePellet fuel quality can fluctuate from manufacturer tomanufacturer,andevenfrombagtobag.Hearth&HomeTechnologiesrecommendsusingonlyfuelthatiscertifiedbythePelletFuelsInstitute(PFI).
FuelMaterial• Madefromsawdustand/orotherwoodby-products• Sourcematerialtypicallydeterminesashcontent
HigherAshContentMaterial• Hardwoodswithhighmineralcontent• Barkandleavesassourcematerial• “Standard”gradepellets
LowerAshContentMaterial• Softwood;pine,fir,etc.• Materialswithlowermineralcontent• “Premium”gradepellets
CAUTION!Tested and approved for usewithwood pelletsONLY.Burningofanyotherfuelwillvoidyourwarranty.
ClinkersMinerals and other non-combustible materials, like sand,willturnintoahardglass-likesubstancewhenheated.Treesfromdifferentareaswillvaryinmineralcontent.Forthis reason, some fuels will produce more clinkers thanothers.
MoistureAlways burn dry fuel. Burning fuel with high moisturecontenttakesenergytodryandtendstocooltheappliancethus,robbingheatfromyourhome.Damppelletfuelcouldturnbackintosawdustwhichdoesnotflowproperlythroughthefeedsystem.
CAUTION!Do not burn fuel that contains an additive.• Maycausehopperfire• DamagetoproductmayresultReadthelistofingredientsonthepackaging.
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1611 3-90-09730c
FireHazard.Keepcombustiblematerials,gasolineandotherflammablevaporsandliquidsclearofappliance.
E. General Operating Information1. Room Sensor Calls For HeatTheapplianceislikemostmodernfurnaces;whentheroomsensorcallsforheat,yourappliancewill automaticallylightanddeliverheat.Whentheroomisuptotemperatureandtheroomsensorissatisfied,theappliancewillshutdown.2. Heat Output ControlsThe appliancewill turn on and off as the room sensordemands.Whentheroomsensorcallsforheat,theappliancewillalwaysstartuponHigh.Afterburningapproximately7-10minutes,theappliancewillthenburnattherateatwhichitwasoriginallyset.Iftheapplianceissetatoneofthelowersettings,itwillrunquieterbuttakelongertoheatupanareathanifitweresetatahigherburnrate.Regardlessoftheburnrate,whentheareaiswarmenoughtosatisfytheroomsensor,theappliancewillshutoff.
WARNING!
• DoNOTstoreflammablematerialsintheappliance’svicinity.
• NEVERUSEGASOLINE,GASOLINE-TYPELANTERNFUEL,KEROSENE,CHARCOAL LIGHTERFLUID,ORSIMILARLIQUIDSTOSTARTOR“FRESHENUP”AFIREINTHISHEATER.KEEPALLSUCHLIQUIDSWELLAWAYFROMTHEHEATERWHILEITISINUSE.
• DONOTBURNGARBAGEORFLAMMABLE FLUIDSSUCHASGASOLINE,NAPHTHAORENGINEOIL.
• DONOTUSECHEMICALSOFFLUIDSTOSTARTTHEFIRE.
• Combustiblematerialsmayignite.
Figure 3.1
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1612 3-90-09730c
B. Fire CharacteristicsAproperlyadjustedfirehasamediumactiveflamepatternthat extends out of the burn pot approximately 6 inches(152mm).
C. Feed Limit InstructionsThe FeedLimit control is factoryset at #4,andshouldbeadequateformostfuels. However,iftheflameheightistoohighortoolow,youwillneedtoadjusttheFeedLimit. Wait until theappliance has beenburningfor15minutesbeforemakingyouradjustmentsand allow15minutesforfeedadjustmenttotakeeffect.
A. Starting Your First Fire1. A roomsensor is required for proper operationof this
appliance in “RoomTemp”mode.At this time, fill thehopperwith pellets, insure the control is set to “OFF”.Figure4.2.Plugthepowercordintoaproperlygrounded,nearbyoutlet.
2.Oncepowerispresent,theunititwillrunthroughaquickdiagnosticstesttoinsurethecontrolisoperatingproperly.Thisisnormal.
3. Foryourfirstfireitmaybenecessarytopurgetheaugersystembyputting the feed limit knob to “Test”prior tostarting theunit.Figure4.3.This insures thatplentyoffuelenterstheburnpotforproperignition.
4. Flip toggleswitch todesiredmode “AutoorDisabled”.Figure4.4.Setfeedlimitknobtodesiredsettingandturnmodedialto“RoomTemp”or“Constantburn”Figure4.5.Note:Feedrateof#4isagoodstartingpoint.Adjustmentsmayneedtobemadedependingonfuelqualityand/orheatoutputdesired.
5. Thefuelfeedsystemandtheignitershouldnowbeon.6. Oncetheappliancehasignited,letitburnforapproximately
7-10minutes.Afterthistime,theigniterlightshouldturnoffandtheunitshouldbegintooperateperthesettingsatthecontrol.
Figure 4.5
Odorsandvaporsreleasedduringinitialoperation.• Curingofhightemperaturepaint.• Openwindowsforaircirculation.
Odorsmaybeirritatingtosensitiveindividuals.
Figure 4.2 Figure 4.3
Figure 4.4
4 Operating Instructions
CAUTION!
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1613 3-90-09730c
D. Ignition Cycles1. Atthebeginningofeachignitioncycle,itisnormaltosee
somesmokeinthefirebox.Thesmokewillstoponcethefirestarts.
2. Thedistributionblowerwillautomaticallyturnonafteryourappliancehasreachedthesettemperature.Thisblowertransfersheatfromyourapplianceintotheroom,andwillcontinuetorun in“constantburn”modeatthesetspeedyouhavethecontrolknobat.In“roomtemp”mode however, the blowerwill turn on and offinaccordance towhat temperature theroomsensor isreading.Whentheroomsensorissatisfiedtheblowerwillshutdownuntiltheroomsensorseesademandforheat.
3. Occasionallytheappliancemayrunoutoffuelandshutitselfdown.Whenthishappens,theunitwillneedtobeturnedtotheoffpositionandrestarted. Ifneeded, follow the instructions inSectionA “StartingYourFirstFire”.
FireRiskDoNOToperateappliance:• Withappliancedooropen.• Burnpotflooropen.• Cleaningslideplatesopen.
DoNOTstorefuel:• Closerthanrequiredclearancestocombustiblestoappliance• Withinspacerequiredforloadingorashremoval.
WARNING!
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1614 3-90-09730c
Igniter Switch to "AUTO" (up position)Makesuretheunitispluggedintoaproperlygrounded,120VAC,60Hzelectricalsource.Thepowerlightshouldbetheonlylightlit.Note: Be sure there is no fuel or other combustibles in the ash pan prior to lighting.1. TurnModeSelectorto"OFF".2. Fillhopperwithpellets.3. Cleanburnpotwithscraper,ifnecessary.4. Ifstartingafteranemptyhopper,turnFeedLimitto"TEST"
(forone60secondcycle).Thiswillflowpelletsintotheauger tubeandalsoallowyoutocheck themotors foroperation.
NOTE: The auger motor will not operate with the view door open.5. TurnFeedLimitto#4.6. FliptheIgniterSwitchupintothe"AUTO"position.7. TurntheTemperatureDialtothedesiredroomtemperature.8. TurnModeSelectortoRoomTemperatureorConstant
Burnmode.9. Fillhopperwithpelletsandremoveashesasrequired.
Keep thehopper lid and fireboxdoors closedwhile inoperation.Maintaindoorsealsingoodcondition.Failuretodosowillaffectoperationof theapplianceandmaypermitescapeofsmokeorgases into the livingspacecausingsmokedetectorstosound.
1. Fines are small pieces of broken pellets (sawdust). Fines do notfloweasilyandoftenbuilduponthehopperfunnelbottomangles.Thesefinescanbepushedintothefeederopeningandthenfillthehopperwithpellets.Asthesystemworks,theywillbe burned.
2. The "TEST" cycle will operate the feed motor for exactly one minute. Turning to "TEST" again and again may load too much fuel into the burn pot causing excessive smoke on start-up.
3. Thefireboxlowpressureswitchwillnotallowtheaugermotoror the igniter element to operate if the view door is open.
4. AdjustFeedLimit.Ifthisisyourfirstfireoryouaretryingdifferentpellets, set the feed limit to #4, Figure 4.6 This is a conservative number and will probably need to be increased. After you know a Feed Limit setting that works well, use that setting. Remember, if your feed rate is too high you may waste fuel.
5. This is usually a weekly maintenance procedure. Cleaning the burn pot with the scraper with a small amount of new fuel in the bottom is not a problem. First, scrape the ashes off the front of the burn pot into the ash pan. Then scrape the holed surface downward into the burn pot. When the stove feeds, these scrapings will be pushed out by the feeder.
6. The ash pan can hold the ashes from approximately 1 ton of premium fuel. This means the ashes will only need to be emptied a few times a year.
7. Setting the feed limit # for maximum burn: With the unit burning in "AUTO", turn to "Constant Burn" and put the fan on "H". Set the Temperature Dial to #7. Allow the unit to burn for about 30 minutes and check ash on front of burn pot. Figure 4.7. If the ash line is larger than 1", turn the feed limit from #4 to #5. Allow another 30 minutes of burn time and check again. If, at #6 setting, a 1" or less ash bed is not obtainable, it is not a problem. The 1" ash bed is only at maximum burn rate and during normal operation, the ash bed will be larger.
Figure 4.6
See Note 71"
Figure 4.7
E. Automatic Ignition
BURNING GARBAGE, USE OF IMPROPER FUELS, FIRE STARTERS OR ALTERING THE STOVE FOR HIGHER HEAT OUTPUT MAY CAUSE DAMAGE TO THE STOVE AND COULD RESULT IN A HOUSE FIRE. USE ONLY APPROVED FUELS AND FOLLOW ONLY THESE OPERATION GUIDELINES.
WARNING!
NEVER USE GASOLINE, GASOLINE-TYPE LANTERN FUEL, KEROSENE, CHARCOAL LIGHTER FLUID, OR SIMILAR LIQUIDS TO START OR 'FRESHEN UP' A FIRE IN THIS HEATER. KEEP ALL SUCH LIQUIDS WELL AWAY FROM THE HEATER, WHILE IN USE.
WARNING!
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1615 3-90-09730c
TheAdvancePelletStoveismorethanjustautomaticignition,it is also automatic temperature control. The automaticsystemwillallowthefiresizetobeadjustedtomatchtheheatingneedsandevenputthefireoutifnecessary.Ifheatisneededafterthefireisout,theAdvancePelletStovewillautomaticallyre-igniteandadjustthefiresizetomatchtheheatingneed.The totallyautomatic roomsensormode isrecommendedbecauseof its efficiency.The unit can beswitched between "AUTO" and "DISABLED" at any timeduringoperation.Igniter switch to “AUTO”Room Temperature ModeIn“RoomTempMode”heatoutputiscontrolledautomaticallybytheRoomSensingProbe.WhentheRoomSensingProbecallsforheat,thestovewillincreaseoutput.WhentheRoomSensingProbeisgettingclosetothesettemperature,thestovewillbegintoleveloffoutputandkeepthefireburningatjusttherighttemperaturetomaintainthatsetting.Highoutput isdeterminedby theFeedLimit setting.Thissetting,generallyon#4,canbeincreasedifhigherburnratesarenecessary(Figure4.6).Theunit’smaximumburnrateshouldnotcreatelessthan1”ofashontheburnpotfrontedge(Figure4.7).Overfeedingisnotasafetyconcern,butfuelmaybewastedifunburnedpelletsfallintotheashpan.In“RoomTempMode”aconstantfuelconsumptionrateissacrificedforexactroomtemperature.Therefore,asitgetscoldermorepelletswillbeburnedautomatically.The distribution blower speedwill vary according to thepositionofthemodeselectorpointer,andfiresize.Igniter switch to “AUTO”Constant Burn ModeThisallowsforautomaticignitionuponstart-uponly.Theunitcanthenbesetatanydesiredsetting.Theheatoutputandfuel consumptionwill remainconstant regardlessof roomtemperature.Theunit’smaximumfeedrateshouldnotcreatelessthan1”ofashontheburnpotfrontedge.Figure4.7.Theunit’slowburnormaintenancesettingisaslowasitwillgo.Itwillnotgooutunlessitrunsoutoffueloristurnedoff.Shut-Down ProcedureTo kill the fire or stop burning the stove, turn theModeSelector to“OFF”.Thiswillcausethefire todiminishandburnout.Whenthefireburnsoutandthestovecoolsdowneverythingwillstop.Ifyoupulltheplugtoshutdownthestove,allmotorswillstop.Thismaycauseincompletecombustionandsmokeinthefirebox.Iftheloaddoorisopened,thesmokemayescape.Thebestwaytoshutdownthestoveissimplyletitrunoutofpellets,thestovewillshutdownautomatically.
Room Temperature Mode: This setting will produce a room temperature of 70 degrees with the distribution blower at medium speed.
This setting will produce medium heat with the distribution blower on "low".
This setting will produce continuous maximum heat output with the distribution blower at full speed.
Constant burn Mode
E. Automatic Ignition (Continued)
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1616 3-90-09730c
B. Quick Reference Maintenance Chart
Follow the detailed instructions found in this section for each step listed in the chart below.
Cleaning or Inspection Frequency Daily Weekly Monthly YearlyAshPan Every5bagsoffueldepending
onthefueltypeorashbuild-upOR X
AshRemovalfromFirebox Every5bagsormorefrequentlydependingonthefueltypeorashbuild-up
OR X
HeatExchanger Every1tonoffuel OR XBlower,Combustion(Exhaust) Morefrequentlydependingon
thefueltypeOR X
Blower,Distribution Every25bagsormorefrequentlydependingonthefueltype
OR X
DoorGasketInspection Priortoheatingseason OR XExhaustPath Morefrequentlydependingon
ashbuild-upOR X
Firebox-PrepareforNon-BurnSeason Atendofheatingseason OR XBurnpot-Burningpellets-hardwood Every3bags OR XBurnpot-Burningpellets-softwood Every5bags OR XGlass Whenclearviewofburnpot
becomesobscureOR X
Hopper/HopperLidGasket Every50bagsoffuelorwhenchangingfueltypes
OR X
VentingSystem Morefrequentlydependingonthefueltype
OR X
NOTICE:Thesearerecommendations.Cleanmorefrequentlyifyouencounterheavybuild-upofashattherecommendedintervaloryouseesootcomingfromthevent.Not properly cleaning your appliance on a regular basis will void your warranty.
5 Maintenance & Service
Shock and Smoke Hazard• Turnunittotheoffposition,letappliance
completelycoolandcombustionblowermustbeoff.Nowyoucanunplugappliancebeforeservicing.
• Smokespillageintoroomcanoccurifapplianceisnotcoolbeforeunplugging.
• Riskofshockifappliancenotunpluggedbeforeservicingappliance.
A. Proper Shutdown Procedure
C. General MaintenanceTypes of FuelThetypeoffuelyouareburningwilldictatehowoftenyouhavetocleanyourburnpot.
Ifthefuelyouareburninghasahighdirtorashcontentitmaybenecessarytocleantheburnpotmorethanonceaday.
Dirtyfuelwillcauseclinkerstoformintheburnpot.Aclinkerisformedwhendirt,ashoranon-burnablesubstanceisheatedto2000°F(1093°C)andbecomesglass-like.
Whenproperlymaintained,yourstovewillgiveyoumanyyearsoftrouble-freeservice.Contact your dealertoanswerquestionsregardingproperoperation,trouble-shootingandserviceforyourappliance.Visitwww.harmanstoves.comtofindyourclosestdealer.Werecommendannualservicebyaqualifiedservicetechnician.
CAUTION!
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1617 3-90-09730c
D. Glass MaintenanceTheglassusedinyourstoveismanufacturedtoexactstandardstowithstandthehighheatofthefire,butlikeallglass,itmust be treated with common sense and care. Never slam the door shut or strike the glass with a heavy object. If the glass is broken or damaged, do not operate the stove until it has been replaced.Glass - ReplacementIfthestove’sglassiscrackedorbroken,youmustreplaceitbeforeoperatingyourstove.Removepiecescarefully.ReplaceglassonlywithHarman®replacementglass;do not use substitutes.Carefullyremovedamagedglass,gasketmaterial,andglassclips(setaside).Installtheselfadhesive1/4”gasketmaterialaroundthefrontfaceoftheglass.Settheglasspanelandgasketgentlyontothedoor.Installtheglassclipsandtighten.Glass - CleaningSometimesitwillbenecessarytocleanaccumulatedashfromtheglasssurface;allowingthisashtoremainontheglassforlongperiodscanresultin“etching”duetotheacidityoftheash.Nevercleantheglasswhileitishot,anddo not use abrasivesubstances.Washthesurfacewithcoolwater,andrinsethoroughly.Youmaywishtouseanon-abrasivecleanerspecificallydesignedforuseonstoveglass.Inanycase,drythoroughlybeforerelightingyourstove.
Top Glass Clip
Side Glass Clip
Nuts
Btm Glass Clip
Side Glass
Window Gasket
Door Assembly
Nut
Nut
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1618 3-90-09730c
CAUTION: Surfaces are hot while in operation, Wear gloves to protect from burns. 1. Opensidedoors.Figure5.12. Releasespringlatchesontherightandleftsideofthe
ashpan.Figure5.23. Slideashpanforwardenoughtoliftwithcenterhandle.
Emptyashesandreinstallashpan.Figure5.3Disposal of Ashes:Ashes should be placed in a steel container with a tight fitting lid. The closed container of ashes should be moved outdoors immediately and placed on a noncombustible floor or on the ground, well away from all combustible materials, pending final disposal. If ashes are disposed of by burial in soil or otherwise locally dispersed, they should be retained in the closed container until all cinders have thoroughly cooled. Other waste shall not be placed in this container.4. Inspectthegasketropelocatedonthebacksideofthe
ashpanfordamage.Replaceifnecessary.5. Insertspringlatchfronthooksintotheashpansideslots.
Pushbothlatchestotherearatthesametimetolatch.Soot and Fly AshFormation and Need For Removal -The products ofcombustionwillcontainsmallparticlesofflyash.Theflyashwillcollectintheexhaustventingsystemandrestricttheflowofthefluegases.Incompletecombustion,suchasoccursduringstartup,shutdown,orincorrectoperationoftheroomheater,willleadtosomesootformationwhichwillcollectintheexhaust venting system.Theexhaust venting systemshouldbeinspectedatleastonceeveryyeartodetermineifcleaningisnecessary.Whenremovingtheashpantoemptyashes,youwillnoteabuildupofashfinesbehindtheashpan.Thisspacebehindtheashpanwasdesignedtoallowthefinestofalloutoftheverticalheatexchangersandcollectwheretheyareeasilycleanedout, rather thangoing into the fluepipewhere itwouldbedifficulttoclean.Thesefinesshouldnotbeallowedtobuildup.Theymaynotallowtheashpantobeseatedintoitsgasketproperly.NOTE: If an extreme amount of force is required to snap the latch on one or both sides of the ash pan, the area behind the ash pan should be checked for ash build up.
E. Ash Pan Removal
Figure 5.1
Figure 5.2
Figure 5.3
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1619 3-90-09730c
Wheneveraddingfuel,taketheopportunitytocleantheburnpot.(Weekly at minimum)• Scrapethetopholedsurfaceandsidesoftheburnpot
down to auger tubeFigure 5.4. It is not necessary tocompletely removeallmaterial from theburnpot.Theexcesswillbepushedoutduringthenextuse.
• With the fire out and burn pot cold, use the suppliedallenwrench to remove any build-up thatmay haveaccumulated intheholesof theburnpotgrate.Simplypushtheallenwrenchdownthrougheachholeensuringitisclearofanybuild-uppayingattentionnottodamagetheigniterelementintheprocess.
Monthly, or after each ton of fuel burned:• Loosenthe(2)wingthumbscrewsonthelowerfrontangle
oftheburnpot.Figure5.5• Liftofftheclean-outcovertoopenthebottomclean-out
chamber.Figure5.6
• Cleanashbuildupfrominsidethechamberwhilecoverisoff.Usethescrapertotaponthetopfrontedgeoftheburnpot.Thiswill helpknockpiecesofash, loosenedbythescrapingprocess,downthroughtheholes.Italsohelpsknockscaleoffoftheigniterelement.
Figure 5.6Theigniterismadetoberemovableforservicebyinsulatedmale/femalewireconnectors.Theseconnectionsbetweenthehot leads(thewires inside theburnpot)and thecoldleads(thewiresfromthecontrolboard)arealwayspulledtotheinsiderearofthefeederbody. (Not coiled inside the burn pot.)Itisveryimportantthattheseconnectionsaretotheinsiderearofthefeederbody.Also,theextrawireoftheigniterwireserviceloopmustbepulledoutthroughtherearofthefeederandtiedupsothatitwillnotbedamagedbyanymovingparts.
Note: The hot lead/cold lead connection must always be pulled to the rear of the feeder body before operation.
Viewed from below through the ash pan opening.
Igniter hot lead wires(High temperature)
Burn pot igniter
F. Burnpot Maintenance
Figure 5.4
Figure 5.5
Figure 5.6
Wing Thumb Screws
Use caution when cleaning burn pot clean-out chamber. Do not damage the high temperature igniter wires.
WARNING!
Disconnect the power to the unit before removing cover.
DANGER!
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1620 3-90-09730c
Slidebrick panel straight upwardwith both hands.Whileholdingthebrickpanelupwithonehand,removetheflameguidefromthetopoftheburnpot.Figure5.7Slidethebrickpanelintotheleftcornerofthefireboxwiththepanelrestingonthetopedgesoftheburnpot.Rotatetherightsideofthebrickpanelthroughthedooropening.Figure5.8Reverse this operation to reinstall the brick panel aftercleaning.
Firebox Brick Panel
Flame Guide/Brick panel holder
Burn pot
Slideupattheseareas.
Removeflameguide
Slidetotheleft Pulltowardyou
G. Brick Panel Removal
Figure 5.7
Figure 5.8
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1621 3-90-09730c
Hook Tab Tab Slot
Monthly Cleaning- continued:1. Removefluebaffleslocatedoneachsideoftheburnpot.
Figures5.9&5.10.Thebaffleisheldinplacebyinsertingthe tab into theslot (located toward theoutsideof thefirebox)andrestingonthehooktablocatedbesidetheburnpot.
2. Pullthepointedendofthebaffleslightlyfrontwithonehandwhilepushingupfrombelowwiththeotherhand.Figure5.10.
3. Withthebafflereleasedfromthetabs,rotatethepointedendtowardthedooropening.Liftbaffleupandout.
Therightandleftbaffleareinterchangeable.4. Nowremovetheheatexchangerbaffleplates.Figure5.11.
Toremovetheleftplate,slidethecenterlocktotheright.Toremovetherightplate,slidethecenterlocktotheleft.(Therightandleftplatesareinterchangeable.)
Thiswillallowaccesstoalloftherearverticalheatexchangersurfaces.5. With all four baffle plates removed, cleaning can be
performedwiththearrowendofthescraper.Figure5.12.6. Scrape all of the heat exchanger surfaces. (Be sure
to cleanany internal ledgeswhere flyash couldhavecollected.)
CenterLock
TopAccordionHeatExchangers
RearFirewallHeatExchanger
H. Heat Exchanger
Figure 5.9
Figure 5.10
Figure 5.11
Figure 5.12
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1622 3-90-09730c
Monthly Cleaning- continued:Thereisacombustionintakecoverlocatedbehindtheashpanthatmustberemovedtoproperlycleanthecombustionblower fan blade. Figure 5.13. In order to remove thecombustion intake cover youmust pull up on the intakeretainer.Figure5.14.Thiswillallowthecombustionintakecover to be removed.To remove the combustion intakecoverpull towardsthefrontoftheunitwhileslidingtotheright.Figure5.15.Nowthatthecombustionintakecoverisremovedyoucanremove any flyash or debris that has collected aroundcombustionblowerfanbladeandareasaroundit.The exhaust passagemay need cleaned aswell. KeepinmindtheESPSensorislocatedjust insidetheexhaustpassageFigure5.16.BesurenottodamagetheESPSensorwhilecleaningthisarea.Figure 5.13
I. Combustion Blower Chamber
Figure 5.14 PulluponIntakeRetainer
Figure 5.15
ESPSensorFigure 5.16
ExhaustPassage
Cover Retainer Handle
Combustion Intake Cover
Pullandslidetotheleft
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1623 3-90-09730c
Feeder ChamberThis chambermaygetabuildupof fines from the feedermechanismmovement.Thisareashouldbecheckedandcleanedatleastonceayear.To remove the feeder cover:• Loosenthe5/16"wingnut.Figure5.17.• Liftupandslidethecoveroffofthethreadedstud.• InspectandcleantheinnerchamberifnecessaryFigure
5.18.• Reinstallthecovermakingcertainitisseatedproperlyon
thefeederbodyandtightenastightlyasyoucanbyhand.NOTE: Views are shown with the rear motor covers removed.
Pellet Metering Slide Plate
Possible pellet fines buildup area.
Figure 5.18
5/16" Wing NutFeeder clean out cover
Figure 5.17
J. Pellet Feeder Chamber
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1624 3-90-09730c
6 Troubleshooting and Frequently Asked Questions Status light error messages:3 Blinks:IndicatesthattheESP(ExhaustSensingProbe)hasfailed,hasabrokenconnection,orhasgoneoutofrangetoomanytimes.Thisrequiresamanualreset*.
4 Blinks: Can occur only in Room TempMode andindicatesRoomSensingProbe failedornot installed. IfaRoomSensingProbeistheninstalled,thestatuslightwillautomaticallyreset.
NOTE:Unitwillnotstartin"AUTO"withthisstatuserror.5 Blinks (In Igniter Auto. Mode Only):Indicatesthattheunithasfailedtolightwithinthe36minutestartcycle.Toreset-TurnModeSelectorto"OFF",thenturntoeithermodeagain.)
6 Blinks :Indicatesthatthecontrolhascalculatedpoororincompletecombustionoccurringformorethan25minutes.Asixblinkstatusmaybesetifthestoveisallowedtorunoutofpellets.Toreset,turnmodeselectorto"OFF"thenbackontothedesiredmode.Iftheunitwasnotoutofpellets,seeTroubleshootingsectionformoredetails.* Manual reset-disconnectpowercordforafewsecondsandreconnect.IferrorstilloccurscallyourDealer.
A. Error Code Description
B. Frequently Asked Questions
ISSUES SOLUTIONS1. Metallicnoise. 1. Noiseiscausedbymetalexpandingandcontractingasit
heatsupandcoolsdown,similartothesoundproducedbyafurnaceorheatingduct.Thisnoisedoesnotaffecttheoperationorlongevityofyourappliance.
2. Whiteashbuilduponglass. 2. Thisisnormal.Cleantheglassusinganynon-abrasiveglasscleaner.
3. Glasshasbuildupofblacksoot 3. Excessive build-up of ash.See solution #4.The lowerburn settings will produce more ash, the higher burnsettingsproduceless.Themoreitburnsonlowthemorefrequentcleaningoftheglassisrequired.
4. Glasshasturneddirty. 4. Excessivebuildupofash.The lowerburnsettingswillproducemoreash,thehigherburnsettingsproduceless.Themoreitburnsonlowthemorefrequentcleaningoftheglassisrequired.
5. Firehastallflameswithblacktailsandislazy. 5. Thefeedrateneedstobereducedortheburnpotneedscleaning. Heat exchanger or exhaust blower needscleaning.
6. Smokystart-uporpuffsofsmokefromtheairwash. 6. Either the burnpot is dirty or there is toomuch fuel atstart-upandnotenoughair.
7. Largeflameatstart-up. 7. This is normal. Flamewill settle down once the fire isestablished.
Contact your dealer for additional information regarding operation and troubleshooting. Visit www.harmanstoves.com to find dealer.
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1625 3-90-09730c
STOVE DOES NOT FEED1. Nofuelinhopper.2. Fireboxdraftmaybetoolowforsensingswitchinfeeder
circuit to operate.Check for closed doors, loose ormissinggasketondoorsorhopperlid.
3. Feedmotorwillnotrununtil theESPcontrolsensesacertaintemperature.Maybeyoudidnotputenoughfuelorstartinggelintheburnpotbeforemanuallylightingthefire.
4. Restrictioninthehopperorfeeder.Removeallfuelandexamine.Cleartheobstruction.
5. Feedmotorhasfailed.PARTIALLY BURNED PELLETS1. Feedratetoohigh.2. Poorairtofuelmixture.(Checkburnpotclean-outcover
andairintake).3. Burnpotorheatexchangertubesmayneedtobecleaned.4. Combinationofalltheabove.5. #6statusblink:A6blinkcontrolboardstatusindication
iscausedbypoororincompletecombustion.ThecircuitboardhastheabilitytotrackthecombustionthroughfeedsettingsandESPtemperatures.Whenthecontrolboardhascalculatedpoororincompletecombustion,itwillshutdown theunitasasafety feature. (Pooror incompletecombustionisacontributorofcreosotewhichmaycauseachimneyfire)
A 6 blink status may be caused by several things:1. Blockedorpartiallyblockedflue.2. Blockedorpartiallyblockedinletair.
a.Backdraftdamperontheinletpipemaybestuckclosed.b.Ifoutsideairisinstalled,theinletcovermaybeblocked.
3. Theairchamberundertheburnpotmaybefilledwithfinesandsmallbitsofash.
4. Theholesintheburnpotmaybegettingfilledwithashorcarbonbuildup.
5. Combustionblowerfanbladesmayneedcleaned.6. Fuelrestrictionsasnotedabove.SMOKE SMELLSealtheventpipejointsandconnectiontostovewithsilicone.Theexhaustventistheonlypartofthesystemthatisunderpositivepressure.FIRE HAS GONE OUT- Check for status light.1. Nofuelinhopper.2. Draftistoolow,blockedflue.3. Somethingisrestrictingfuelflow.4. Hopperlidnotclosedproperly.5. Feedmotororcombustionblowerhasfailed.
SMOKE IS VISIBLE COMING OUT OF VENT1. Air-fuelratioistoorich.
a.Feedratetoohigh.b.Drafttoolowcausedbyagasketleak.
LOW HEAT OUTPUT1. Feedratetoolow2. Drafttoolowbecauseofgasketleak.3. Poorqualityordamppellets4. Combinationof1and2.HELPFUL HINTS1. Cleaning Burn PotWheneveryourstoveisnotburning,taketheopportunitytoscrape theburnpot to removecarbonbuildup.Avacuumcleanerishandytoremovetheresidue.Besurethestoveiscoldifyouuseavacuum.Carbonbuildupcanbescrapedloosewiththefireburningusingthespecialtoolprovidedwithyourstove.Scrapethefloorandsidesoftheburnpot.Thecarbonwillbepushedoutbytheincomingfuel.Alwayswearglovestodothis.2. Removing AshesTurn theTemperatureDial tonumber1approximately30minutesbeforeremovingashes.Thiswillresultinacoolerstoveandashpan.Maximum Feed Limit settings are not needed inmostcases.Operatinginthenormalrange(#4)isrecommendedwhenmaximumheatoutputisnotrequired.TheESPprobepreventsthestovefrombeingover-fired.Keepthestovefreeofdustanddirt.FuelTheAdvancePelletStoveisapprovedforburninganygradeofpelletizedbio-massfuel.It should be noted, however, that higher ash contentwillrequiremorefrequentashremoval,scrapingoftheburnpot,andmayprovidelessBTU’sperpound.Themoisturecontentofpelletsmustnotexceed8%.HighermoisturewillrobBTU’sandmaynotburnproperly.Fuel shouldnot be storedwithin the stove installationclearancesorwithin the space required for cleaningandashremoval.
C. TroubleshootingWithproper installation,operation,andmaintenanceyourappliancewillprovideyearsof trouble-freeservice. Ifyoudoexperienceaproblem,thistroubleshootingguidewillassistaqualifiedservicepersoninthediagnosisofaproblemandthecorrectiveactiontobetaken.Thistroubleshootingguidecanonlybeusedbyaqualifiedservicetechnician.
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1626 3-90-09730c
7 Reference Material A. Safety RemindersWhenoperatingyourHarman®AdvancePelletStove,respectbasic safety standards.Read these instructions carefullybefore youattempt to operate theAdvancePelletStove.Failuretodosomayresultindamagetopropertyorpersonalinjuryandmayvoidtheproductwarranty.Duetohightemperatures,thisstoveshouldbeplacedoutoftrafficandawayfromfurnitureanddraperies.Childrenandadultsshouldbealertedtothehazardsofhighsurfacetemperaturesandshouldstayawaytoavoidburntoskinand/orclothing.Youngchildrenshouldbecarefullysupervisedwhentheyareinthesameroomasthestove.Clothingandotherflammablematerialsshouldnotbeplacedonornearthisstove.Installationand repair of this stove should bedoneby aqualifiedserviceperson.Theapplianceshouldbeinspectedbeforeuseandatleastannuallybyaqualifiedserviceperson.Morefrequentcleaningwillberequired.Itisimperativethatcontrol compartmentsand circulatingair passagewaysofthisstovebekeptclean.Disposal of ashes:Ashes should be placed in ametalcontainerwith a tight fitting lid.The closed container ofashesshouldbeplacedonanon-combustiblefloororontheground,wellawayfromallcombustiblematerials,pendingfinaldisposal.Iftheashesaredisposedofbyburialinsoilorotherwise locallydispersed, theyshouldbe retained intheclosedcontaineruntilallcindershavethoroughlycooled.Soot and fly ash: Formationandneed for removal.Theproductsof combustion contain small particlesof flyash.Theflyashwillcollectintheexhaustventingsystemandwillrestricttheflowofthefluegases.Pelletfuelshavedifferentashcontentsdependingonwhattypeofwoodhasbeenusedtomakethepellets.We recommend to clean the system after approximately 1 ton of pellets have been burned and judge from that how often the stove should be cleaned, remember if you change pellets it may change how often you have to clean your stove. Whenburningwoodslowly,thepotentialexistsforcreosotetoform.Theventingsystemshouldbeinspectedperiodicallythroughout theheatingseason todetermine if a creosotebuildup has occurred. If a significant layer of creosotehasaccumulated(3mmormore),itshouldberemovedtoreduce the riskofachimneyfire. Ifafireoccurs,call thefire department, shut down the stove, and evacuate theresidence.Before using the appliance, have the ventingsystem thoroughly inspected and replace any damagedcomponents.
CAUTION!THE STRUCTURAL INTEGRITY OF THE MOBILE HOME FLOOR, WALL, AND CEILING/ROOF MUST BE MAINTAINED.
CAUTION!THE STOVE IS HOT WHILE IN OPERATION.KEEP CHILDREN, CLOTHING AND FURNITURE AWAY. CONTACT MAY CAUSE SKIN BURNS.
WARNING!USE OF IMPROPER FUELS, FIRESTARTERS OR ALTERING THE STOVE FOR HIGHER HEAT OUTPUT MAY CAUSE DAMAGE TO THE STOVE AND COULD RESULT IN A HOUSE FIRE. USE ONLY APPROVED FUELS AND OPERATION GUIDELINES
WARNING!KEEP COMBUSTIBLE MATERIALS SUCH AS GRASS, LEAVES, ETC. AT LEAST 3 FEET AWAY FROM THE POINT DIRECTLY UNDER THE VENT TERMINATION.
WARNING!MOBILE/MANUFACTURED HOME GUIDELINES DO NOT ALLOW INSTALLATION IN A SLEEPING ROOM.
CAUTION!This appliance must be vented to the outside.
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1627 3-90-09730c
The Low Draft Pressure Switchisadifferentialpressureswitchthatmonitors thenegativepressure (Draft) in the firebox. If thedraftbecomestoo lowforpropercombustion, theswitchopens,cuttingpowertothefeedmotorandtheignitercircuits.ThisswitchisconnectedintotheAC(highvoltage)wiring.
TheControl Board/ESP combination is responsible forall highlimitsafetycontrol.Thereare2highlimits,onenormaloperationhighlimitandonebackuphighlimit.Thecontrolhasanautomaticdiagnosticcircuit thatcontinuouslymonitors theESPandRoomSensorforfaults.Ifafaultshouldoccur,thecontrolsendsastatusalertandatthesametimetheunitgoesdowntominimumfeed/minimumburnasasafetycondition.
B. Motor and Component Location
Advance Pellet Stove Safety Devices
Low Draft Pressure Switch
Combustion Blower
Feed motor
Backdraft Damper AssemblyAlways check to see if thedamperplate swings freely inwardand thatthe seating edges are not coveredwithdirtorlint.
ESP
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1628 3-90-09730c
C. Loss of PowerMinimizing Smoke During Loss of Power Using Battery Back-upHarman® strongly recommends installing battery back-up to minimize entry of smoke into the room in the event of power loss.Your pellet/biomass burning appliance relies on acombustionblowertoremoveexhaust.Apowerfailurewillcause the combustion blower to stop. This may lead toexhaustseepingintotheroom.Verticalriseintheventingmay provide natural draft. It is, however, no guaranteeagainstleakage.There are two Harman® approved battery back-up options for your appliance:Uninterruptible Power Supply UPSbatteryback-upsareavailableonlineoratcomputerandofficeequipmentstores.Your Harman® appliance with Rev E or later softwareavailable beginning in November 2010 may be pluggeddirectlyintoaHarman®approvedUPS:• The APC (American Power Conversion) model
#BE750GandtheTrippLitemodelINTERNET750Uaretestedandapproved.Otherbrandsormodelsmaynotbecompatible.
Whenpowerislost,afullychargedUPSwillpowerasafe,combustion blower only shut-down. Your appliance willpulsetheblowereveryfewsecondstoclearexhaustuntilthefireisout. NOTE: The UPS provides safe shut-down only. It is not intended for continued operation.• TheSurefire512connectstoa12voltdeepcyclebattery
thatwill runyourappliance forup toeight (8)hours. Itincludesatricklechargefeaturethatkeepsyourbatterychargedwhenpowerisavailable.NOTE:Ifthepowerisoutforlongerthanbatterylife,smokeleakagemaystilloccurunlessyourstovehasbeensafelyshutdown.
Yourappliancewillrecognizewhenpowerisrestored.Whathappens depends onESP temperature andwhether it isequippedwithautomaticignition:• In “Automatic” Mode,unitsequippedwithautomatic
ignitionwillrespondtothesetpointandESPtemperatureandresumenormaloperation.
• In “Idle” Mode,orforunitswithoutautomaticignition:• If the ESP is cool, the appliance will remain shut
down.• IfthefireisoutandtheESPisstillwarm,thefeeder
mayrestart.Sincethefireisout,theESPtemperaturewillnotrise.Theunitwillthenshut-down,andmayflashasix-blinkstatuserror.(SeeESPerrorcodes)
• If the fire is still burning, it will resume normaloperation.
Contact your dealer if you have questions about UPScompatibilitywithyourappliance.
Use only Harman® approved battery back-up devices. Other products may not operate properly, can create unsafe conditions or damage your appliance.
CAUTION!Always keep appliance doors and hopper lid closed and latched during operation and during power failures to minimize risk of smoke or burn-back.
D. Emergency Manual IgnitionHarman® pellet stovesand inserts shouldbe lit using theautomatic ignition system. This is the safest and mostreliablewayforignitingtheunit.Intheeventtheautomaticigniterisnotfunctioning,thestepsbelowmaybefollowedtomanuallylightthestoveorinsertinthe“ConstantBurn”mode. Manual lighting is for emergency purposes only,andtheignitershouldberepairedorreplacedassoonaspractical.
WARNING!Only use firestarter commercially marketed for pelletstoves and inserts, including wax coated wood chips,pellet starter gel and pellet igniter blocks. Use of anyothertypeoffirestarterisprohibited.
To avoid serious injury or death read and followmanufacturer’swarningandinstructionsforuseoffirestarter.Useoffirestarterisonlypermittedwhenperformingacoldstart.Neverattempt tomanually lightastoveor insert thathasbeen operated recently and is not at room temperature.If automatic ignition was attempted, be sure to give thestoveorinsertatleast30minutesorlongertocooltoroomtemperature.Besurethatthestoveorinsertisinthe“Igniter-Disabled”modeofoperation.Once all the precautions have been taken, follow thesesteps:1.TurntheModeSelectorto“OFF”.2.Fillburnpotwithpellets,onlyhalfway.(DoNotOverFill).3.Add firestarter to pellets following manufacturer’s
instructions.4.Lightpelletgelwithamatch,andclosethedoor,turnMode
SelectortoConstantBurn.Operationwillbeginwhenthefirereachesthepropertemperature.
WARNING!
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1629 3-90-09730c
-
Harman® • Advance Owner’s Manual_R41 • 1999 - ___ • 04/1630 3-90-09730c
352MountainHouseRoad,Halifax,PA17032www.harmanstoves.com
E. Contact Information
PleasecontactyourHarman®dealerwithanyquestionsorconcerns.ForthelocationofyournearestHarman®dealer,
pleasevisitwww.harmanstoves.com.
- NOTES -
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
DO NOT DISCARD THIS MANUAL
NOTICE
• Leave thismanualwithpartyresponsibleforuseandoperation.
• Important operatingand maintenanceinstructionsincluded.
• Read,understandandfollowtheseinstructionsforsafeinstallationandoperation.
Printed in U.S.A.