owens corning spiral duct liner now being manufactured by superior duct fabrication

Download Owens Corning Spiral Duct Liner now being manufactured by Superior Duct Fabrication

Post on 16-Aug-2015

22 views

Category:

Services

0 download

Embed Size (px)

TRANSCRIPT

  1. 1. On time Deliveries | High Quality | Efciency | Integrity | Knowledge | Dedication to Excellence Air Handling Insulation Solution Members of: SMACNA, SPIDA, SMWIA, IHACI Superior Duct Fabrication | 1683 Mount Vernon Ave. | Pomona, Ca. 91768 | Hours: Monday - Friday 5:00am to 5:00pm (800) 797-Duct (3828) Toll-Free | (909) 620-6374 Main Fax | www.sdfab.com Superior Duct Fabrication is pleased to now offer Owens Corning QuietZone Spiral Duct Liner. It is both anti-bacterial and anti-fungal. QuietZone Spiral Duct Liner is available in 1", 1.5", and 2" thicknesses. It is tested according to UL 181 standards and is listed with UL Laboratories The R-value and sound absorption of QuietZone Spiral Duct Liner outperforms other compressed insulation available in the market. Superior Duct Fabrications highly trained and experienced mechanics and sheet metal workers use Superiors special equipment and processes to assure that every QuietZone Spiral Duct Liner board is carefully grooved, cut to size and fitted in spiral duct and fittings.The surface is fitted with a durable and permanent airstream surface that is longer lasting, when compared to insulating products with sprayed-on coatings that tend to get brittle and crack over time. Superior Duct Fabrication round, internally-lined systems are the perfect, economical solution.. QuietZone Spiral Duct Liner Key Features Outstanding thermal and acoustical performance Cleanable surface with a black mat facing that provides a smooth, durable surface making it easier to clean the duct liners using methods and equipment described in North American Insulation Manufacturers Association (NAIMA) Publication AH122, Cleaning Fibrous Glass Insulated Duct Systems: Recommended Practice Bacterial and fungal growth resistant with an EPA registered biocide that protects the airstream surface from microbial growth Standards, Codes Compliance National Fire Protection Association Standards NFPA 90A/90B ICC International Mechanical Code NYC MEA# 186-69 Meets requirements of ASTM C1338, ASTM G21, fungi test) and ASTM G22 (bacteria test) ASTM C1071, Type II Rigid Superior Duct Fabrication is an independent contractor and not an affiliate of Owens Corning Insulating Systems, LLC or its affiliated companies. The color PINK is a registered trademark of Owens Corning. Quiet Zone.qxp_Layout 1 4/28/15 2:37 PM Page 1
  2. 2. On time Deliveries | High Quality | Efciency | Integrity | Knowledge | Dedication to Excellence Air Handling Insulation Solution Superior Duct Fabrication | 1683 Mount Vernon Ave. | Pomona, Ca. 91768 | Hours: Monday - Friday 5:00am to 5:00pm (800) 797-Duct (3828) Toll-Free | (909) 620-6374 Main Fax | www.sdfab.com 1. The surface burning characteristics of these products have been determined in accordance with UL 723. This standard should be used to measure and describe the properties of materials, products or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. Values are reported to the nearest 5 rating. ASTM E84 and UL 723 are the same test method. Thermal Performance at 75F (24C) Mean Temperature Physical Property Data 1" (25mm) 1.5" (38mm) 2.0 (5lmm) R-value: ft2F/Btu (RSI: m2C/W) 4.3 (0.76) 6.5 (1.15) 8.7 (1.53) k-value: Btuin/hrft2F (W/m2C) 0.23 (0.033) 0.23 (0.033) .23 (0.033) Property Test Method Value Maximum Temperature Limits UL 181 Internal 250F (121C) External 150F (66C) Maximum Air Velocity UL 181 Erosion Test 6,000 fpm (30.5 m/s) Water Vapor Sorption (by weight) ASTM C1104