overriding dead lock batt elps

ELPS\LPI Instr. 1

Instructions for Overriding Dead

Lock Battery using the LPI/ELPS

SAFLOK LPI/ELPS

(Lock Programmer-Interrogator/Emergency Lock Power Supply)

The SAFLOK LPI/ELPS device is more frequently used for programming and

interrogating locks. However, the device can also be used to open a lock that has a dead

internal battery. Typically a lock with a dead battery will not flash any lights after a

keycard is used. If a lock displays flashing lights after a keycard is used, please consult

your services manual for troubleshooting other conditions.

SAFLOK System Requirements

1. LPI/ELPS device (Part # 74334)

2. Male 25DB-Male 25DB parallel cable (Part # 7542380)

3. 6 ‘ Download cable (part # 71982)

4. Handheld module (Part # 701913 with Software Version # 031905 or greater)

5. PC with a serial port and SAFLOK Client application (Version # 2.36 or greater)

6. SAFLOK SL2500 ASIC or MT series locks (Software Version # 81305 or

greater)

Top View Bottom View

ELPS\LPI Instr. 2



Procedure

1. Launch and then logon to the SAFLOK Client application. Select the Locks tab.

Select the Program Locks button.

2. The Information box will appear. Before making a selection, connect one end of the

download cable to the serial port on the PC and the other end to the handheld. Select

OK on the Information box.

ELPS\LPI Instr. 3



3. The Select LPI Command window will appear. Select the Override Lock Problem

option and click the OK button.

4. The Ekey Selection window will appear. Click the Emergency key inside the box,

and click the OK button.

ELPS\LPI Instr. 4



5. The SAFLOK Client message box will appear. Click OK. At this point, the

handheld is configured.

6. Now view the HH5 Main Menu screen on the handheld device. Press 2 on the

keypad, which will move the cursor to 2.Take Unit to Locks, then press Enter.

7. Screen M254 will appear. Follow the screen instructions and then press Enter.

Additionally, separate the handheld from its base, then take the handheld and

LPI/ELPS to the lock

8. On the following screen, Press 6 that will move the cursor to 6. Send ELPS key.

Press Enter.

9. Screen M252 will appear. Follow the on screen instruction by pressing Enter.

HH5 MAIN MENU

02-18-06 09:09AM DST

2. Take Unit to Locks

3. Setup Menu

M254: Disconnect

Terminal Cables and

Connect LPI Probe

**PRESS ANY KEY**

02-18-06 09:09AM DST

5. Lock Vers/LED Diag

6. Send ELPS key

Select Choice ?

ELPS\LPI Instr. 5



10. Screen M251 will display until the LPI/ELPS device is inserted into the lock.

11. As soon as screen M236 appears turn the lock’s handle to open the door.

12. After the door has been opened, remove the LPI/ELPS device from the lock. Press

Enter and then ESC on the handheld. The handheld will return to the following

screen. Select 7. Disable ELPS key and then press Enter

13. At this point the ELPS feature has been disable and the handheld should be returned

to its base.

****Warning***** The battery in the LPI/ELPS device will be drained of its power

if connected to the handheld while the handheld is on its base charger. Please

remove the LPI\ELPS device from the handheld when it’s not in use.

M252: Press Any Key

and then Insert LPI

Probe into Lock!

(Press ESC to Abort)

M251: Please Wait

Programming the Lock

M236: ELPS is powered

and the lock is open

Please turn handle

Press Any Key

02-18-06 09:10AM DST

6. Send ELPS key

7. Disable ELPS key

Select Choice ?

overriding dead lock batt elps

Documents