outside air pressure pickup port c16oa static pressure pickup port accessories for hvac/r 02012018...
TRANSCRIPT
Next level building automation engineered to help you make smart decisions.
1150 Roberts Boulevard, Kennesaw, Georgia 30144770-429-3000 Fax 770-429-3001 | www.automatedlogic.com© Automated Logic 2017
OA Static Pressure Pickup PortAccessories for HVAC/R
02012018
Automated Logic’a Outside Air Pressure Pickup Port is an easy,
economical and attractive way of measuring outdoor static pressure.
The pickup port also helps stabilize readings because it significantly
reduces the pressure fluctuations caused by wind gusts. Differences
in building pressure are caused by the operation of supply fans
or exhaust fans and usually measure less than .1 inches of water
column (W.C.). A gentle breeze of 10 MPH provides a pressure of .048
inches W.C., while a strong wind of 40 MPH provides .772 inches W.C.
A gale of 75 MPH can measure over 2.7 inches. BAPI’s pickup port
significantly reduces these wind pressures for a stable and accurate
reading at the pressure sensor and controller.
The unit is also very rugged with a UV-resistant and flame-
retardant housing to perform and last under harsh conditions.
It is available in Rooftop or Wall Mount or Vertical Mount for
building soffits or ceilings.
C16Zone Pressure Sensors (ZPS)
Building Automation Products, Inc. • 750 North Royal Avenue, Gays Mills, WI 54631 USATel: +1-608-735-4800 • Fax: +1-608-735-4804 • Email: [email protected] • Web: www.bapihvac.com
Outside Air Pressure Pickup Port
Specifications
Rooftop or Wall Mount
EnvironmentalOperation Range: Temperature: -40 to 212 °F (-40 to 100 °C) Humidity: 0% to 100% RH, condensing
Material: UV-resistant plastic
l Rooftop, Wall or Vertical Mountl Helps Stabilize Readings by Reducing
Fluctuations from Wind Gusts
BAPI’s Outside Air Pressure Pickup Port is an easy, economical and attractive way of measuring outdoor static pressure. The pickup port also helps stabilize readings because it significantly reduces the pressure fluctuations caused by wind gusts. Differences in building pressure are caused by the operation of supply fans or exhaust fans and usually measure less than .1 inches of water column (W.C.). A gentle breeze of 10 MPH provides a pressure of .048 inches W.C., while a strong wind of 40 MPH provides .772 inches W.C. A gale of 75 MPH can measure over 2.7 inches. BAPI’s pickup port significantly reduces these wind pressures for a stable and accurate reading at the pressure sensor and controller. The unit is also very rugged with a UV-resistant and flame-retardant housing to perform and last under harsh conditions. It is available in Rooftop or Wall Mount or Vertical Mount for building soffits or ceilings.
Features & Options
Rooftop Mount or Wall Mount
(Conduit and tubing not included)
Part Number DescriptionZPS-ACC10............ Rooftop or Wall Mount UnitZPS-ACC10-V ........ Vertical Mount Unit
Patent Pending
Vertical Mount
Rev. 12/19/16
Ordering Information
C16Zone Pressure Sensors (ZPS)
Building Automation Products, Inc. • 750 North Royal Avenue, Gays Mills, WI 54631 USATel: +1-608-735-4800 • Fax: +1-608-735-4804 • Email: [email protected] • Web: www.bapihvac.com
Outside Air Pressure Pickup Port
Specifications
Rooftop or Wall Mount
EnvironmentalOperation Range: Temperature: -40 to 212 °F (-40 to 100 °C) Humidity: 0% to 100% RH, condensing
Material: UV-resistant plastic
l Rooftop, Wall or Vertical Mountl Helps Stabilize Readings by Reducing
Fluctuations from Wind Gusts
BAPI’s Outside Air Pressure Pickup Port is an easy, economical and attractive way of measuring outdoor static pressure. The pickup port also helps stabilize readings because it significantly reduces the pressure fluctuations caused by wind gusts. Differences in building pressure are caused by the operation of supply fans or exhaust fans and usually measure less than .1 inches of water column (W.C.). A gentle breeze of 10 MPH provides a pressure of .048 inches W.C., while a strong wind of 40 MPH provides .772 inches W.C. A gale of 75 MPH can measure over 2.7 inches. BAPI’s pickup port significantly reduces these wind pressures for a stable and accurate reading at the pressure sensor and controller. The unit is also very rugged with a UV-resistant and flame-retardant housing to perform and last under harsh conditions. It is available in Rooftop or Wall Mount or Vertical Mount for building soffits or ceilings.
Features & Options
Rooftop Mount or Wall Mount
(Conduit and tubing not included)
Part Number DescriptionZPS-ACC10............ Rooftop or Wall Mount UnitZPS-ACC10-V ........ Vertical Mount Unit
Patent Pending
Vertical Mount
Rev. 12/19/16
Ordering Information
Part Number Description
NSB-ZPS-ACC10-A Rooftop or Wall Mount Unit
Specifications
Enclosure Material
• UV-resistant plastic
Environmental Operation Range:
• Temperature: -40 to 212 °F | (-40 to 100 °C)
• Humidity: 0% to 100% RH, condensing
C16Zone Pressure Sensors (ZPS)
Building Automation Products, Inc. • 750 North Royal Avenue, Gays Mills, WI 54631 USATel: +1-608-735-4800 • Fax: +1-608-735-4804 • Email: [email protected] • Web: www.bapihvac.com
Outside Air Pressure Pickup Port
Specifications
Rooftop or Wall Mount
EnvironmentalOperation Range: Temperature: -40 to 212 °F (-40 to 100 °C) Humidity: 0% to 100% RH, condensing
Material: UV-resistant plastic
l Rooftop, Wall or Vertical Mountl Helps Stabilize Readings by Reducing
Fluctuations from Wind Gusts
BAPI’s Outside Air Pressure Pickup Port is an easy, economical and attractive way of measuring outdoor static pressure. The pickup port also helps stabilize readings because it significantly reduces the pressure fluctuations caused by wind gusts. Differences in building pressure are caused by the operation of supply fans or exhaust fans and usually measure less than .1 inches of water column (W.C.). A gentle breeze of 10 MPH provides a pressure of .048 inches W.C., while a strong wind of 40 MPH provides .772 inches W.C. A gale of 75 MPH can measure over 2.7 inches. BAPI’s pickup port significantly reduces these wind pressures for a stable and accurate reading at the pressure sensor and controller. The unit is also very rugged with a UV-resistant and flame-retardant housing to perform and last under harsh conditions. It is available in Rooftop or Wall Mount or Vertical Mount for building soffits or ceilings.
Features & Options
Rooftop Mount or Wall Mount
(Conduit and tubing not included)
Part Number DescriptionZPS-ACC10............ Rooftop or Wall Mount UnitZPS-ACC10-V ........ Vertical Mount Unit
Patent Pending
Vertical Mount
Rev. 12/19/16
Ordering Information