osprey metal powders product range - … · 2 osprey metal p owders the following document contains...

osprey™ metal powdersPRODUCT RANGETECHNICAL SPECIFICATION

2 Osprey metal pOwders

The following document contains details of the various Osprey™ alloy families manufactured by Sandvik. These include the following:

products- Stainless steels - Austenitic stainless steels - Duplex and special stainless steels - Ferritic stainless steels - Martensitic stainless steels - Precipitation hardening stainless steels

- Binary alloys- Cobalt alloys- Copper alloys- High speed steels - Low alloy steels - Magnetic alloys - Master alloys- Nickel alloys- Super alloys- Tool steels

The list of alloys represents the more popular products within the portfolio, but it is not exhaustive. If there is an alloy of interest that does not appear in the list, please contact our sales department for details on availability.

The majority of alloys listed are based on ASTM standards. These can also be provided in accordance with other regional standards such as the European EN standards. Please check with our sales department for more details.

The chemical composition of these alloys can be adjusted and refined to suit individual customer requirements.

chemical compositionPlease note that the values in the following tables are the nominal values unless otherwise stated. Maximum values are highlighted by an asterisk *.

OVERVIEW OF OUR METAL POWDERS

3Osprey metal pOwders

PRECIPITATION HARDENING STAINLESS STEELS

Alloy UNS Chemical composition (nominal) %

Fe C Mn Si Cr S P Cu Nb Al Ni

15-5 PH S15500 Balance 0.07* 0.7 0.7 14.5 0.03* 0.04* 3.5 0.3 4.5

17-4 PH S17400 Balance 0.07* 0.7 0.7 16.5 0.03* 0.04* 4.0 0.3 4.5

17-7 PH S17700 Balance 0.09* 0.7 0.7 17.0 0.04* 0.04* 1.1 7.2

FERRITIC STAINLESS STEELS


Fe C Cr Mo Si Mn S P

430L Balance 0.03* 17.0 0.7 0.7 0.03* 0.04*

434 S43400 Balance 0.12* 17.0 1.0 0.7 0.7 0.03* 0.04*

MARTENSITIC STAINLESS STEELS


Fe C Cr Mo Si Mn S P Others

410 S41000 Balance 0.15* 12.5 0.7 0.7 0.03* 0.04*

420 S42000 Balance 0.25 13.0 0.7 0.7 0.03* 0.04*

420-J2 S42000 Balance 0.45 13.0 0.7 0.7 0.03* 0.04* 1.5 Nb

440A S44002 Balance 0.65 17.0 0.75* 0.7 0.7 0.03* 0.04*

440B S44003 Balance 0.8 17.0 0.65 0.7 0.7 0.03* 0.04*

440C S44004 Balance 1.1 17.0 0.65 0.7 0.7 0.03* 0.04*

AUSTENITIC STAINLESS STEELS


Fe C Cr Ni Mo Si Mn S P Cu

304L S30403 Balance 0.03* 19.0 10.0 0.7 1.5 0.03* 0.04*

310L S30600 Balance 0.04* 25.0 20.5 1.0 1.5 0.03* 0.04*

316L S31603 Balance 0.03* 17.0 12.0 2.5 0.7 1.5 0.03* 0.04*

904L - Balance 0.02* 21.0 25.0 4.5 0.7 1.5 0.035* 0.04* 1.5

DUPLEX AND SPECIAL STAINLESS STEELS


Fe C Cr Ni Mo Nb W Si Mn P S Other

1.4091 - Balance 1.15 34.0 15.0 3.0 0.8 1.0 0.7 0.03* 0.03*

1.4882 - Balance 0.5 21 4.5 2.3 1.3 0.3 9.0 0.05* 0.03* 0.4 N

HK-30 J94203 Balance 0.3 25.0 20.5 0.5* 1.3 1.2 1.0 0.04* 0.04*

SAF 2205 S31803 Balance 0.03* 22.5 5.5 3.2 0.7 1.5 0.03* 0.015* 0.18 N

SAF 2507 S32750 Balance 0.03* 25.0 7.0 4.0 0.4 0.9 0.04* 0.03* 0.28 N


COPPER ALLOYS

Alloy Chemical composition (nominal) %

Cu Fe Ni P Sn Mn Al O

OFHC Cu 99.99 Min. 0.15*

HC Cu 99.95 Min. 0.30*

HC Cu (Cold Spray) 99.95 Min. 0.05*

Cu10Al Balance 2.5 1.0* 1.0* 1.0 9.5

Cu10Sn Balance 0.4* 10,0

Cu15Sn Balance 0.4* 15.0

COBALT ALLOYS


Co C Cr Mo Ni W Mn Si Fe

Co 212 Balance Various 28.5 6.0 0.1* 0.7 0.7 0.75*

Co 452 Balance 1.0 27.0 1.0* 3.0* 4.5 0.7 1.5 3.0*

Co 502 Balance 1.4 29.0 3.0* 8.5 0.7 1.5 3.0*

Co 90 Balance 0.1* 20.0 10.0 15.0 1.0 0.4* 3.0*

BINARY ALLOYS


Fe Cr Ni Cu Co Mo W C Mn Si

Fe-Co Balance 1 to 50 0.2* 0.7 0.7

Fe-Cr Balance 1 to 50 0.5* 0.1* 1.5 1.5

Fe-Mo Balance 1 to 38 0.2* 0.3 0.7

Fe-Ni Balance 1 to 50 0.1* 0.7 0.7

Fe-Si Balance 0.1* 0.7 1 to 45

Fe-W Balance 1 to 30 0.2* 0.7 0.7

Ni-Cr 1 to 50 Balance 0.2* 0.3 0.3

Ni-Cu Balance 1 to 40 0.1* 0.3 0.3


TOOL STEELS AND HIGH SPEED STEELS


Fe C Mn Si Cr Ni Mo W V Co Ti Al

A6 T30106 Balance 0.7 2.1 0.3 1.1 0.3* 1.1

D2 T30402 Balance 1.5 0.4 0.4 12.0 0.3* 0.9 1.1*

H13 T20813 Balance 0.4 0.3 1.0 5.0 0.3* 1.5 1,0

M2 T11302 Balance 0.95 0.3 0.3 4.1 0.3* 5.0 6.0 2.0

S2 T41902 Balance 0.5 0.4 1.1 0.3* 0.5 0.5*

T15 T12015 Balance 1.5 0.3 0.3 4.2 0.3* 1.0* 12.5 5.0 5.0

18Ni300 - Balance 0.03* 0.1* 0.1* 0.3* 18.0 4.8 9.0 0.7 0.1

1,2709 - Balance 0.03* 0.1* 0.1* 18.0 5.2 9.5 0.9

LOW ALLOY STEELS


Fe C Cr Ni Mo Si Mn S P

4140 G41400 Balance 0.4 0.9 0.2 0.25 0.85 0.04* 0.035*

4340 G43400 Balance 0.4 0.8 1.8 0.25 0.25 0.7 0.04* 0.035*

4365 G43650 Balance 0.65 0.8 1.8 0.25 0.25 0.7 0.04* 0.035*

4605 G46050 Balance 0.5 2.0 0.35 0.7

8620 G86200 Balance 0.2 0.5 0.5 0.2 0.25 0.8 0.04* 0.035*

SAE 52100 (100Cr6) G52986 Balance 1.0 1.5 0.25 0.35 0.025* 0.025*

SCM415 G41180 Balance 0.15 1.0 0.25 0.25 0.25 0.7 0.03* 0.03*

MASTER ALLOYS

Alloy Blend Ratio Chemical composition (nominal) %

MA Carbonyl Fe Fe C Cr Ni Cu Nb Mo Si Mn W V

304L/MA 1 2 Balance 0.07* 56.0 26.0 1.5 1.5

316L/MA 1 2 Balance 0.03* 55 38.0 7.3 0.7 0.5

17-4 PH/MA 1 2 Balance 0.07* 50.0 13.0 12.0 0.70 1.5 0.7

420/MA 1 3 Balance 0.9 50.0 1.5 1.5

440C/MA 1 2 Balance 3.0 50.0 2.25 2.0 2.0

4140/MA 1 2 Balance 1.2 2.9 0.6 0.75 2.6

4340/MA 1 2 Balance 1.2 2.4 4.6 0.75 0.75 1.8

4605/MA 1 4 Balance 0.5 10.0 1.7 1.5

8620/MA 1 2 Balance 0.6 1.6 1.6 0.6 0.9 2.4

Fe50Cr(LC) - - Balance 0.02* 50.0 1.5 1.5

M2/MA 1 2 Balance 3.0 12.5 15.0 1.0 0.8 18.0 6.0


NICKEL ALLOYS


Fe Cr Ni Co C S Mn Si Al O

Fe29Ni17Co (Kovar) Balance 0.2* 29 17 0.02* 0.3 0.2 0.01*

Invar 36 Balance 0.02* 36 0.3 0.25

Ni 0.5* Balance 0.02* 0.01* 0.4*

MAGNETIC ALLOYS


Fe C Mn Si Cr Mo S P Co Ni

430F Balance 0.13 0.7 0.7 17.0 0.4

430L Balance 0.03* 0.7 0.7 17.0 0.03* 0.04*

Fe8Cr Balance 0.03* 0.6 0.8 8.0 0.35 0.03* 0.03*

Fe12Cr Balance 0.03* 0.6 0.8 12.0 0.35 0.03* 0.03*

Fe18Cr Balance 0.03* 0.6 0.8 18.0 0.35 0.03* 0.03*

Fe1.5Si Balance 0.03* 0.3* 1.5 0.03* 0.03*

Fe3Si Balance 0.03* 0.3* 3.0 0.03* 0.03*

Fe7Si Balance 0.03* 0.3* 7.0 0.03* 0.03*

Fe27Co0.2Si Balance 0.25 0.25 0.7* 27.0 0.7*

Fe50Co0.2Si Balance 0.25 0.25 0.7* 50.0 0.7*

Fe49Ni Balance 0.05* 0.5 0.5* 0.5* 49.0

Fe50Ni Balance 0.05* 0.5* 0.5* 0.5* 50.0

Fe80NiMo Balance 0.2* 0.2* Various 80.0

Ni17Fe2Mo 17.0 0.5* 0.5* 2.0 Balance

Ni20Fe 20.0 0.5* 0.5* Balance

Ni4.5Mo 15.5 0.2* 0.2* 4.5 Balance

SUPER ALLOYS


Ni Cr Fe Nb Mo Al Ti Co C Si Mn V Other

GHS-4 - 39.0 12.5 Balance 6.0 1.0* 2.2 1.7 1.1 0.9 0.5 W

H-C22 N06022 Balance 21.5 5.0 13.0 2.5* 0.03* 0.4 0.7 0.3* 4.0 W

H - X N06002 Balance 21.5 18.5 9.0 1.5 0.15* 0.7 0.7 0.6 W

IN 600 N06600 Balance 15.5 8.0 0.15* 0.3 0.7

IN 625 N06625 Balance 21.5 5* 3.5 9.0 0.4* 0.4* 0.1* 0.3 0.3

IN 713C N07713 Balance 13.0 2.5* 2.3 4.5 5.5 0.7 0.13 0.5* 0.1 Zr

IN 718 N07718 52.0 18.5 Balance 5.1 3.0 0.5 0.9 0.04 0.35* 0.35*

NI 80A N07080 Balance 19.5 1.0* 0.3* 1.5 2.3 2.0* 0.07 0.7 0.7 0.08 Zr

NI 90 N07090 Balance 19.0 1.5 1.2 2.2 18.0 0.13* 0.7 0.7


TYPICAL PARTICLE SIzE DISTRIBUTIONS*

Particle size distribution (µm)

D10 (%) D50 (%) D90 (%)

-38 5.5 13.0 31.0

-32 5.0 12.0 29.0

80% -22 4.5 11.5 27.0

90% -22 4.0 10.5 22.0

90% -16 3.5 9.0 16.0

*Values measured using Malvern laser diffraction method

of particle analysis.

particle size distributionIn our flexible atomizing facilities we are capable of manufacturing high quality metal powder in an extremely wide range of particle size distributions, up to 250 μm. In particular, Sandvik has developed proprietary technology specifically designed for the production of fine powder, less than 38 μm.

Different applications require different particle size distributions. In the context of Metal Injection Moulding (MIM) Sandvik offers the following standard particle size ranges:

For other applications please contact our sales offices to discuss the recommended particle size ranges in more detail. Tailor-made particle size distributions are also available on request.

S-P

T0

47-

DS

-EN

G. 0

5.2

015

SMt.SanDVIk.coM/MetalpowDer

osprey metal powders product range - … · 2 osprey metal p owders the following document contains...

Documents