os 1744 with 4 camera - lorex technology · 2016-02-08 · menu quad/autoca1 ca 2 ca 3 ca 4 talk...
TRANSCRIPT
Before operating the unit, please read this manual thoroughly and retain it for future reference
OWNER'S MANUAL
REAL TIME BUILT-IN QUAD OBSERVATION SYSTEMWITH REMOTE CONTROL17" B/W BUILT-IN QUAD & PAN/TILT CONTROL MONITORWITH 4 CAMERA
OS
174
4
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS.
Explanation of Graphical Symbols
This symbol is intended to alert the user to the presence of uninsulated, dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute risk of electric shock.
This symbol is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.
RISK OF ELECTRIC SHOCK DO NOT OPEN.
CAUTION
WARNING
CAUTION
WARNING
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DONOT REMOVE THE COVER (OR BACK) NO USERSERVICEABLE PARTS INSIDE FOR SERVICING REFER TO AQUALIFIED SERVICE PROFESSIONAL
1. READ INSTRUCTIONS-All the safety and operating instructions
should be read before the appliance is operated.
2. RETAIN INSTRUCTIONS-The safety and operating instructions
should be retained for future reference.
3. CLEANING-Unplug the monitor from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
4. ATTACHMENTS-Do not use attachments not recommended by the
monitor manufacturer as they may result in the risk of
fire, electric shock or injury.
5. WATER AND MOISTURE-Do not use this television equipment near
water (eg,bathtub,washbowl,kitchen sink,laundrytub, etc.)
6. ACCESSORIES-Do not place this monitor on an
unstable cart, stand or table. The monitor may fall,
causing serious injury to a child or adult, and serious damage to the
equipment. Wall or shell mounting should follow the manufacturer's
instructions, and should use a mounting kit approved by the
manufacturer.
6A. The monitor and cart combinations should be moved with
care. Quick stops, excessive force, and uneven surfaces may cause
the equipment and cart combination to overturn.
7. VENTILATION- Slots and openings in the cabinet and the back or
bottom are provided for ventilation, and to ensure reliable operation of
the monitor and to protect it from overheating. These
openings must not be blocked or covered. The openings should never
be blocked by placing the monitor on a bed, sofa, rug. or
other similar surface. This monitor should never be placed
near or over a radiator or heat register. This monitor/camera
should not be placed in a built-in installation such as a
bookcase unless proper ventilation is provided.
8. POWER SOURCES-This monitor should be operated
only from the type of power source indicated on the marking label. For
monitors designed to operate from battery power refer to
the operating instructions.
9. GROUNDING OR POLARIZATION-This monitor is
provided with a polarized alternating-current line plug(a plug having
one blade wider then the other). The plug will fit into the power outlet
only one way.
ALTERNATE WARNING-This product is equipped with a three wire
grounding-type plug. This plug will only fit into a grounding-type power
outlet.
I M P O R T A N T S A F E G U A R D S
I M P O R T A N T S A F E G U A R D S
10. POWER CORDS-Do not allow anything to rest on the power cord.
11. HEED WARNINGS-Follow all instructions marked on the monitor.
12. LIGHTNING-For added protection for this monitor during
a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the video
product due to lightning and power-line surges.
13. OVERLOADING-Do not overload wall outlets and extension cords as
this can result in a risk of fire or electric shock.
14. OBJECT AND LIQUID ENTRY-Never push objects of any kind into
monitor through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric
shock. Never spill any kind of liquid on the product.
15. SERVICING-Do not attempt to service this monitor
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified
service personnel.
16. DAMAGE REQUIRING SERVICE-Unplug this monitor from the wall
outlet and refer servicing to qualified service personnel under the
following conditions:
A. When the power supply cord or the plug has been damaged.
B. If liquid has been spilled,or objects have fallen into the video
product.
C. If the video product has been exposed to rain or water.
D. If the video product does not operate normally by following the
operating instructions, adjust only those controls that are covered
by the operating instructions. A improper adjustment of other
controls, may result in damage and will often require extensive
work by a qualified technician to restore the video product to its
normal operation.
E. If the video product has been dropped, or the cabinet damaged.
F. When the video product exhibits a distinct change in performance -
this indicates a need for service.
17. REPLACEMENT PARTS-When replacement parts are required, be
sure the service technician has used replacement parts specified by
the manufacturer or that have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric
shock or other hazards.
18. SAFETY CHECK-Upon completion of any service or repairs to this
video product, ask the service technician to perform safety checks to
determine that the video product is in proper operating condition.
SAVE THESE INSTRUCTIONS.
NOTE:This equipment has been tested and found to comply with the limits for a Class A digital device, pursuit to Part 15of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in aresidential installation This equipment generates, uses, and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radio communication. However there is noguarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to tryto correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio or television technician for help.
FCC CLASS A NOTICE
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in theRadio Interference Regulations of the Canadian Department of Communications.
Le present appareil numerique n'emet pas de bruits radio electriques depassant les limites applicables aux appareilsnumeriques de la class A prescrites dans le Reglement sur le brouillage radio eiectrique edicte par le ministetre desCommunications du Canada.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.
The users manual or instruction manual for an intentional or unintentional radiator shall caution theUser that changes or modifications not expressly approved by the party responsible for compliancecould void the user authority to operate the equipment.
WARNING:TO PREVENT DAMAGE WHICH MAY RESULT
IN FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
FCC CLASS A NOTICE
CERTIFICATION:This unit complies withDHHS rules 2 cfrsubchapter J and FCCrules 47 c f r par t isapplicable at date ofmanufacture.
RISK OF ELECTRIC SHOCK DO NOT OPEN.
CAUTION
TABLE OF CONTENTS
Introduction ........................................................................................... 3
Precaution Before Installing or Using the System ................................. 3
Description of ControlsMonitor Unit ............................................................................................ 4-9Camera Units .......................................................................................... 10-12
InstallationCamera Units ...........................................................................................13-15Monitor Unit .................................................................................... 16-17
Wiring Diagram ..................................................................................... 18
Trouble shooting guide ......................................................................... 19
Specifications Monitor Unit ............................................................................................ 20Camera Unit ........................................................................................... 21-23
Accessories .......................................................................................... 24-25
Care and Maintenance ......................................................................... 26Warranty ............................................................................................... 27
page
This OBSERVATION SYSTEM will give you added security and comfort for many years. It is easy to install in almost anywhere you need audio/ video surveillance. To safely use all the high technical functions of the unit, please read the installation and operating instruction in this manual, and keep it for the future reference. FEATURES
• Built- in Real Time Quad Processor • 2 Way audio between monitor and cameras • Pan+ Tilt controls for dome camera • Motion sensor capability of up to 20fit distance • Record and review the images with a standard VCR or Time Lapse Recorder • On Screen Date/Time/Camera ID Display • Built-in alarm Inputs /Outputs
SYSTEM CONTENTS • 17” B/ W Quad + Pan/ Tilt monitor • 2 B/W Motion sensor cameras with built-in speaker • 1 B/W High resolution camera with built-in speaker • 1 B/ W Pan/ Tilt dome camera without built-in speaker • 4 - 65 ft camera connection cables • Remote control
Read the following precautions before installing or using the system 1. Choose an ideal location for the camera so that the lens won't be exposed to any direct light source. The camera unit must also be protected against moisture and vibration. 2. The monitor should only be operated with the correct power source indicated on the adaptor. 3. Check the system for operation prior to installing the unit.
4. Be extra careful not to scratch the camera lens. 3
INTRODUCTION
4
DESCRIPTION OF CONTROLS & OPERATION
VOLUME V-HOLD.H-POSI.BRIGHT CONT.
VCR
123456
7 8 9 10 111213
MIC POWER
PUSH
MENU CA1 CA 2 CA 3 CA 4 TALKQUAD/AUTO
BUILT-IN QUADOBSERVATION SYSTEM
CAMERA1 CAMERA2
CAMERA3 CAMERA4
AUTO AL
2002. 10. 28. 12:32:26
15
14
Front View
A. Monitor Unit FRONT VIEW
1. POWER ON/OFF SWITCH (STANDBY)By pushing the standby button the image and sound on the monitor can beswitched ON and OFF. The alarm functions also remain active.
2. TALK BUTTONPress and hold this button to talk through to the camera. Release it to receive audio. When you press the “TALK” button in the quad mode, the Monitorwill display the letter “T”. The channel being displayed, “T” means it is ready to transmit the audio. To transmit, press the selected channel button. In full screen mode, press the“TALK” button to transmit the audio.
3. CAMERA-1,2,3,4 BUTTONSPress each button to monitor the desired channel.
4. QUAD / AUTO SWITCHING BUTTONThis button is used to change between the QUAD and AUTO modes. Pressing this button changes the screen from QUAD display to full screen display. The monitor will automatically switch between the four camera locations. Press this button to return to QUAD display.Quad function - Displays up to four cameras on the screen at one time. The pictures are reduced in size to one-fourth of the screen. The screen is divided into four quadrants. Auto function - Selecting the system in the auto switching mode, with more thanone camera will automatically display the locations one by one. When turning the system on, Camera 1 will operate automatically. After turning on the system, you can program the Auto Switching sequence of the cameras being viewed. By pressing the Auto button again the automatic switching function is switched off. NOTE : AUTO appears on the screen.
DESCRIPTION OF CONTROLS & OPERATION
5
5. MENU(ON SCREEN DISPLAY) This monitor provides an on screen programming function including camera identification, sequence, scan dwell time, alarm reset time and time/date.SETTING UPTo enter the on-screen programming, press the MENU button located on the front of the monitor. The main menu, as identified below will appear.
NOTE: USE THE (UP / DOWN) AND (LEFT / RIGHT) ARROW BUTTONS LOCATED ON THE FRONT OF THE MONITORTO MOVE AROUND THE SCREEN.
1) TITLE SET (CAMERA IDENTIFICATION) Press the MENU button to enter the title set (Camera Identification) mode. The Cursor button will automatically flash over the first letter in Camera1. Use the (UP / DOWN) and (LEFT / RIGHT) buttons to name the camera location (EG. FRONT, COUNTER, etc) A total of eight characters are available. When complete, press the MENU button to proceed to cameras 2,3 and 4. Press the MENU button until you exit, and return to the main menu. You can turn the monitor display ON or OFF.
2) SEQUENCEThis function is used in the AUTO mode. The camera will automatically rotate between the four camera locations in AUTOmode. The monitor has been defaulted to a 1-2-3-4-Q setting. To change this setting proceed as outlined below. Otherwise proceed to SCAN DWELL TIME. To change the sequence of camera setting, press the menu button. Use the (UP / DOWN) and (LEFT / RIGHT) buttons to change the camera sequence. When complete, press the MENU button to exit.
3) SCAN DWELL TIMEThis function is used in AUTO Mode to automatically rotate from one camera to another. The setting is defaulted to 1 second, but can be adjusted between 1-60 seconds. To change the Scan Dwell time, proceed as outlined below. Otherwise proceed to ALARM RESET TIME• Use the (UP / DOWN) arrow keys to go to SCAN DWELL TIME selection.
• Press the MENU button to scan dwell time. Use the (UP / DOWN) arrow keys to adjust the time. When complete, press the MENU button to exit.
4) TIME / DATETo adjust the time or date, proceed as follows: Use the (UP / DOWN) arrow keys to go to proceed to the TIME/DATE menu.Press the MENU button to enter this setting and use the (UP / DOWN) arrow keys to change the settings. When complete, press the MENU button to exit the TIME/DATE menu. You can turn the monitordiplay ON or OFF.
( MAIN MENU )1. TITLE SET2. SEQUENCE3. SCAN DWELL TIME4. TIME / DATE5. ALARM MODE6. EXIT
DESCRIPTION OF CONTROLS & OPERATION
6
5) ALARM MODEWhen motion / movement is detected at the camera location,the monitor will display in full-screen for this camera. The letters AL will appear at the top right corner of the screen and the camera location where the alarm has taken place will appear in the top left hand corner. An Alarm buzzer will sound to alert you of an emergency situation. This alarm will sound for five seconds. 1. Defaulting alarm time procced 15 seconds, and used to adjust
selecting defaulting time. 1) Used to adjust selecting time schedule, allowing to switch turn
ON/OFF the monitor display of each channel. 2) Pressing “Alarm ON/OFF default” goes to turning off.
2. Alarm operation1) With one channel operation, the channel with which the alarm has
taken placed will operate in full screen only. If there is more than two channels operating, the letter AL will appear.
2) When the signal is cut off from the Camera, you can see the “LOSS” in quad display, and an Alarm buzzer will sound to alert you of an emergency situation.Use the (UP / DOWN) arrow keys to go to the ALARM RESET TIME MODE selection.Press the MENU button to enter this setting. Use the (UP / DOWN) arrow keys to change the setting. When complete, press the MENU button to exit ALARM RESET TIME MODE.
When the alarm function is used, the monitor will automatically switch to full screen display when motion/movement is detected. The user will be alerted to motion being detected for 1-90 seconds (see alarm reset time). At the end of this time, the monitor will automatically switch back to the previous mode in which it was originally set. Should additional triggers be received during the second period, the systemwill automatically switch to the relevant cameras and continue the
warning sound. Optional recording devices (VCR. time lapse VCR, Eventrecorders) can also be connected to the monitor to record key events.
Remark : The monitor installed SENSOR input / PIR sensor camera will always switches to the camera image of the last-received alarm. Sensor inputs/outputs switches allow you to control optional sensor accessories directly to the monitor. The alarm trigger device should be coneected to the monitor. The alarm trigger device should be normally open. The alarm output can be either normally open or closed.
6. MICROPHONEPick up sound around the monitor.
7. VOLUME CONTROL KNOBTurn on the VOLUME control up or down to reach the desired volume.
8. VERTICAL HOLD CONTROL KNOBUsed to adjust the VERTICAL synchronization.
9. HORIZONTAL POSITIONUsed to adjust the HORIZONTAL stability of the screen.
10. BRIGHTNESS CONTROL KNOB Used to adjust the BRIGHTNESS of the screen.
Normally open+ DC 12V(MAX 100mA)_ GND
SENSOR IN ALARMOUT
C1 C2 C3 C4
11. CONTRAST CONTROL KNOBUsed to adjust the CONTRAST of the screen.
12. VCR ON/OFF SELECTOR Press this button to playback the video signal from VCR. Press it again to stop the video signal. (When the VCR button is “ON”, the red LED will display)VCR Recording Reviewing Method1) Connect the monitor to the VCR and press the RECORD button
on the VCR to start recording the pictures. (NOTE: Ensure your VCR is set to auxiliary mode. Consult your VCR Owner’s manual for details.)
2) To review the recorded pictures, press the VCR button on themonitor and then the PLAY button on the VCR.
13. PAN/TILT ON/OFF SELECTORThis feature allows you to control the dome camera. The motorized PAN/TILT camera allows you to change the camera direction, either up or left to right depending on your prefernce.• Use the (Left/Right) arrow keys to rotate the camera 355
horizontally. Use the (Up/Down) arrow keys to rotate the camera85 vertically.
• In the Quad Mode, pressing the Pan/Tilt key will diaplay the letter “P” on the monitor. The letter “P” will appear in the upper left hand quadrant for Camera 1. Pressing the Pan/Tilt key again will place the letter “P” in the second quadrant or Camera 2, and so on, for Camera 3 and 4.
• For the Full Screen Mode(Pan/Tilt), press the Quad/Auto button to switch it back to full screen. Press the individual camera channel 1,2,3or 4, depending on the camera channel the Pan/Tilt Dome camera is connected to. Finally, press the Pan/Tilt button to activate the Pan/Tilt feature. The letter “P” will appear on the screen. use the left/right and
up/down arrow keys to rotate the camera.14. FREEZE ON/OFF SELECTOR
Stoppage of image or playback is allowed only in Quad or Full Screenmode. • In the Quad Mode press the Freeze button to stop the image, and press it again to release or unfreeze the image. The letter “F” will be appear on the display screen. Press the freeze button and then press the individual camera channel 1,2,3 or 4 to freeze the image on that channel. Press the camera channel again to unfreeze the image.
• For the Full Screen Mode, you must press the Quad/Auto button to switch it back to full screen. Press the individual channel to take it out of the AUTO mode. Press the individual channel again(1,2,3 or 4) to freez the camera image, and press again to unfreeze it.
15. REMOTE CONTROL SENSORTurn on the main power, and push the stand-by button. Using the remote control gives you full switcher functions on the front panel of the monitor (except for the power function).
DESCRIPTION OF CONTROLS & OPERATION
7
MENU
QUADVCR
1
3
5
54 6
87 9
0
QUAD
CA1
CA2
CA3 CA4
AUTO
VCR PAN/TILT FREEZE
CAMERA 1~4
AUTOFREEZE (QUAD)
PAN/TILT
2
4
6
7
MENU
Remote controller
2 “AAA” Batteries requiredfor remote control
REAR VIEW
16. CAMERA INPUT JACKSInputs to connect camera.
17. VIDEO INPUTReceives video signal from VCR or other recording devices.
18. AUDIO INPUTReceives audio signal from VCR.
19. AUDIO OUTPUTTransmits audio signal to audio amplifier. Also used in recording on VCR.
20. VIDEO OUTPUTTransmits video signal from a camera to another monitor. Also used in recording on VCR.
21. AC POWER CORDPlug the supplied power supply cord into the monitor, the other end to an outlet.
22. SLAVE MONITOR OUTPUTAudio and video output for slave monitor. Connect via double male to doublemale phone leads of required length. NB: Maximum recommended distance between master and slave monitor is 65ft.
23. ALARM FUNCTION INPUT / OUTPUTSSwitches alarm function on/off NB alarm function is set to on position upon activation of the monitor via power switch.
DESCRIPTION OF CONTROLS & OPERATION
8
C1 C2 C3 C4
SENSOR IN ALARM OUT CA1 CA2 CA3 CA4
CAMERA IN PUT
1623 2421 17 19 20 22
25
26
18
CA1 CA2 CA3 CA4
A)B+B)Audio inC) Camera audio AMP:B+,
PAN/TILT control signalD)Video inE)Audio outF)N.C
Rear View
D
E
F
A
B
C
DESCRIPTION OF CONTROLS & OPERATION
9
24. MAIN POWER SWITCHThis switch is used to turn ON or OFF all power to the monitor.
25. LOOPING OUTPUTS 1~4These are looping outputs for cameras, one through four. Can be used to display cameras on a separate monitor or recorder.
26. BNC CAMERA INPUTS 1~4These inputs are used for standard cameras with BNC type connectors.
DESCRIPTION OF CONTROLS & OPERATION
A. Motion Sensor Camera Unit
1)
3)
2)
Front View
4) 5)
a. b. c. d. e.
Front View
1. MICROPHONEPick up sound around the camera
2. CCD CAMERAA LENSDelivers a clear detailed pocture to the Monitor (auto-focus, auto-iris)
3. MONITOR SENSORSensor detects movement within a 6 meter range
4. CABLE CONNECTOR COVERRemove the 2 screws to release the Cover and connect the cable
5. CABLE CONNECTORThe camera cable will plug into this Connector. The following color coding for the wires are listed below.a. Black (Motion Sensor signal)b. Yellow (Microphone audio signal)c. Black (Ground for A/V signal)d. White (Camera video signal)e. Red (Power supply input)
10
DESCRIPTION OF CONTROLS & OPERATION
1. CCD CAMERA LENSTurn the front ring of the lens to obtain the focus desired.
2. MICROPHONEPick up sound around the camera.
3. ALARM TERMINALConnect an optional alarm device to this terminal.
4. MONITOR INPUT JACKConnect to cable the monitor.
5. BRACKET
6. SPEAKERDeliver the sound from the monitor.
B. High Resolution Camera Unit
Front View Rear View
1
26
5
TO MONITOR
4
3TERMINAL
IN Alarm input (normally open)GND GroundB+ Power output +12V DC 100mA
IN
GND
B+
TERMINAL
11
DESCRIPTION OF CONTROLS & OPERATION
107
C. Pan/Tilt Dome Camera Unit
Adaptor plate
fl3 x 20 screw
Hook
Base (hold base when you twist to attach the dome to adaptor plate)Swivel
Bubble
1. CCD Camera Lens - Delivers a clear detailed picture to the monitor2. Pan/Tilt Mechanism - Up/Down & Left/Right movements, giving you 3553. Din Plug Connector - Connect the 65 ft cable from this connector on the dome camera to the monitor
(1) (2)
(3)
12
INSTALLATION
A. Motion Sensor Camera UnitInstalling the mounting bracket/rain cover
PILOT HOLE
HORIZONTAL MOUNTING SURFACE
MOUNTING BRACKET
VERTICALMOUNTINGSURFACE
MOUNTING SCREW
Installing the mounting bracket/rain cover
MOUNTING BRACKET
CAMERA
MOUNTING SURFACE
1.The camera mounting bracket can be installed on any vertical or horizontal flat surface using the two mounting screws provided (fpr the best viewing angle install between 2 to 4 meters from the ground)
2.Once the mounting bracket is secure on the wall or ceiling, remove the camera cable cover by taking out the two small screws with a Philips screwdriver
3. Attach the camera to the privot bolt on the mounting bracket by screwing it on by hand4. Plug the camra cable into the connector on the back of the camera and run the other end of the cable back to the monitor5. Replace the cover on the back of the camera
13
INSTALLATION
B. High Resolution Camera Unit
Permanent installation using pedestal stand.
CAUTION : Keep camera installed away from direct sunlight. Also avoid places where humidity is high or where the camera is not protected from rain. The mounting bracket must be attached to a structural object such as a wall stud or ceiling rafter using suitable fastener. Do not touch the glass of the lens. This could damage the delicate coating on its surface. If the lens has to be cleaned, use a special lens cleaning tissue available at any camera store.
14
1. Attach the Pedestal using 4 screws. 2. Attach the Camera onto the Pedestal and tighten the thumb screw.
INSTALLATION
A
105
10510
7
FRONT VIEW TOP VIEW
Electrical power is not connected to the dome and observation / quad monitor during installation.
Adaptor plate
fl3 x 20 screw
Hook
Base (hold base when you twist to attach the dome to adaptor plate)Swivel
Bubble
To install the dome camera on a ceiling or wall follow these procedures :
1. Twist open the clear dome cover in a CCW direction to reach inside the dome camera (Turn at the swirel section of the camera).
2. Place the dome camera on a flat surface.
3. Run the 65 ft DIN cable (Included with the dome camera) from the wired lead of the dome camera to the back of the monitor, in one of the camera inputs labeled, “CH1, CH2, CH3 or CH4”
4. Attach the adaptor plate on the ceiling or wall, using the 3 screws provided (Ø3 X 20 screw)
5. Twist the base of the dome camera to the adaptor plate on the ceiling or wall.
Do not hold clear bubble or swivel, when you attach the dome on the adaptor plate.
15
C. Pan/Tilt Dome Camera Unit
C. Monitor Unit
1-4 Camera connections
Using the provided cables, connect the camera to the monitor as shown in the diagram below.
C1 C2 C3 C4
SENSOR IN ALARM OUT CA1 CA2 CA3 CA4
CAMERA IN PUT
1 2 3 4
CA1 CA2 CA3 CA4
1. Camera 1 TerminalConnect camera 1 cable to this terminal.
2. Camera 2 TerminalConnect camera 2 cable to this terminal.
3. Camera 3 TerminalConnect camera 3 cable to this terminal.
4. Camera 4 TerminalConnect camera 4 cable to this terminal.
INSTALLATION
AC Power Cord
16
Monitor with BNC cameras
The observation monitor may be installed with a standard BNC output security camera. Connect one end of the BNCvideo cable to the output of the camera and the other end of the BNC video cable to the BNC camera input on the rear of the observation monitor.
INSTALLATION
AUDIO/ VIDEO JACK CONNECTIONS.
Refer to the following connection method, when connecting to the VCR
INSTALLATION WITH A TIME- LAPSE RECORDER.
Monitor VCR Terminal
Video OUT Video INAudio OUT Audio INVideo IN Video OUTAudio IN Audio OUT
Monitor Back view TIME lapse recorder
Video 1 OUT Video INAudio 1 OUT Audio INVideo IN Video OUTAudio IN Audio OUT
SLAVE Monitor
Video 2 OUT Video IN Audio 2 OUT Audio IN
NOTE: The cable for this connection is not supplied with the unit. An "RCA" type cable is required.
NOTE: Ensure your VCR is SET to AUXILIARY (AV) MODE. Consult your owners manual for details
17
NOTE: Do not use RCA jack to connect any cameras.
WIRING DIAGRAMS
WIRING Connections
C1 C2 C3 C4
SENSOR IN ALARM OUT CA1 CA2 CA3 CA4
CAMERA IN PUT
CAMERA1
CAMERA3
CAMERA4
CAMERA2
CA1 CA2 CA3 CA4
CCD CAMERA
CCD CAMERA
18
TROUBLE SHOOTING GUIDE
19
Problem
Multiple image in picture
Picture rolls up or down
Too dark or bright picture.
NO POWER
Poor picture quality
Picture but no sound
Sound but no picture
Shrinking picture
Monitor
Check Point
Readjust the VERTICAL Holdcontrol knob.
Readjust the VERTICAL Holdcontrol knob.
Readjust the CONTRAST orBRIGHTNESS controls.
Check for AC connection.
Clean the camera lens.Readjust the CONTRAST or
BRIGHTNESS controls.
Adjust the VOLUME control knob.
Readjust the CONTRASTor BRIGHTNESS controls.
Check the condition of thePOWER source.
Before calling service, check the following points for possible misuse.
SPECIFICATIONS
Monitor
Picture tubeHorizontal resolutionTV signal formatCamera inputVideo input (VCR) Video outputMax. wiring distanceConnection Camera switching timeOutput slave monitor A/VAlarm inputAlarm outputAlarm time (OSD menu) Power sourceDimensionsWeightAmbient temperature (operating/storage) Cabinet humidity (operating/storage) Cabinet
17" B/W 90° deflection angle750 lines at center
EIA : 700 lines, 60 Hz 1.0V p-p 75Ω terminated1.0V p-p 75Ω terminated1V p-p (75Ω load) 100 m 6 pin DIN JACK / BNC Connector1 ~ 60 seconds (Adjustable) RCA connectors8 pin push type4 pin push type1 ~ 90 Seconds (Adjustable)100-240V~, 50/60Hz, 0.7A161/4”(W) X 141/2”(D) X 151/4”(H)mm32 lbs14°F ~ 122°F10% ~ 90%Metal with plastic front
20
SPECIFICATIONS
21
High Resolution Camera Unit
Image SensorEffective Picture ElementsHorizontal Drive FrequencyVertical Drive FrequencyVideo OutputAudio Output
Iris, Automatic Control by Electronic SystemAngle PictureLens MountAlarm inputs Power RequirementsMinimum Light lluminanceOperating TemperatureDimensions
1/3" CCD B/WEIA : 492(V) X 512(H)EIA : 15.75 KHz / CCIR : 15.625KHz EIA : 60Hz / CCIR : 50Hz1V p-p 75 ohm200 mV
Horizontal 74° Vertical 55°C/CS mount3 PIN terminals12V 200mA, Maximum 2.4W0.1 Lux-10°C ~ +50°C (14°F ~ 122°F)50(W) X 120(D) X 50(H)mm
SPECIFICATIONS
Motion Sensor Camera Unit
Image SensorPicture ElementsResolutionMin. IlluminationVideo/Audio OutputS/N RatioOperating Temp.DimesionsSensor rangeRange of the motion sensor
1/3” B/W CCD251,000 Pixels>380 TV Lines1 Lux1V p-p (75 ohm)>50 dB-10°C ~ +50°C118(W) X 95(D) X 110(H) mm6 MetreHorizontal 90° Vertical 80°
22
SPECIFICATIONS
Power sourceImage sensorActive pixelsImage sensor areaSignal to noiseElectronic irisSynchronization Signal formatVideo outputAudio outputAmbient temperatureAmbient humidityResolution Min. illumination LensPower consumptionDimensions
12V 1/3” interline transfer CCD, B/WEIA : 512(H) X 492(V) 4.8(H) X 3.7(V)mm46dB1/100.000 secInternalEIA : 525 lines, 2:1 interlace1.0V p-p (75 ohms) 600 ohms line level-10°C ~ +50°C0-96% Non-condensing> 380 TV lines1 Lux3.6mmMAX 2.4W126 X 95 mm
Pan/Tilt Dome Camera Unit
23
Because this product is subject to continuous improvement, the manufacturer reserves the right tomodify its design and specifications without notice and without incurring any obligation. E & O.E.
ACCESSORIES
Standard Accessories
Screws Pedestal stand/Mounting Bracket6P Cable(20m)
24
Remote Control
54 6
87 9
0
QUAD
CA1
CA2
CA3 CA4
AUTO
VCR PAN/TILT FREEZE
MENU
ACCESSORIES
25
Optional Accessories
Bullet Camera Dome Camera Mounts
Extension cable
High Power Night Vision Camera
Weather proof housingVCR
STOP/EJECT
POWER
REC
DIGITAL CCD CAMERA
CARE AND MAINTENANCE
Your video observation system is an example of superior craftsmanship. Followingthese precautions will give you many years of solid performance and enjoyment.
Keep your monitor & camera dry. If it does wet,wipe it dry immediately.
Use and store your unit in normal temperature environment.Extreme temperatures can shorten the life of electronic devices.
Handle the monitor carefully. Dropping it can causeserious damage to the unit.
Occasionally, clean the unit with a damp cloth to keep it lookingnew. Do not use harsh chemicals, cleaning solvents, or strongdetergents to clean the unit.
Keep the unit away from excessive dirt and dust.These can cause premature wear of parts.
Note : All specifications subject to change without notice. E & OE.
26
Home Sentinel warrants this home security product ("The Product") to be free from defects in material andworkmanship for a period of one year from date of purchase. This warranty does not cover any expenses incurredin the removal and reinstallation of the product. This warranty is offered to the original purchaser of the productonly.
If the product should prove defective within the warranty period, return the product postage prepaid to HomeSentinel, along with your dated sales slip or other proof of purchase which will establish your eligibility for thewarranty. Home Sentinel will at its option, replace or repair the product free of charge and return the product toyou postage prepaid. This warranty does not apply to the product which has been damaged, misused, altered orrepaired by anyone other than a Home Sentinel authorized service facility.
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE AND MERCHANTABILITY ARE LIMITED INDURATION TO THE PERIOD OF THE EXPRESS WARRANTY SET FORTH ABOVE, AND NO PERSON ISAUTHORIZED TO ASSUME FOR HOME SENTINEL ANY OTHER LIABILITY IN CONNECTION WITH THE SALEOF THE PRODUCT. HOME SENTINEL EXPRESSLY DISCLAIMS LIABILITY FOR INCIDENTAL ANDCONSEQUENTIAL DAMAGES CAUSED BY THE PRODUCT. THE REMEDIES PROVIDED UNDER THIS WARRANTYARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state orprovince to provinces Some states/provinces do not allow limitation on how long warranty lasts, so the abovelimitation may not apply to you. Additionally, some states/provinces do not allow the exclusion of limitation ofconsequential or incidental damages, so the above limitation or exclusion may not apply to you.
WARRANTY
27