Prof. V.M.Patil Department of Mechanical Engineering RCPIT, Shirpur

Orthographic Projection Practice Questions

ED-U-II/N1: Using First Angle Projection Method draw –

(a) Front View (b) Top View (c) Left Hand Side View for the following object.

ED-U-II/N2: Using Third Angle Projection Method draw –

(a)Front View (b) Top View & (c) Right Hand Side View for the following object.

Prof. V.M.Patil Department of Mechanical Engineering RCPIT, Shirpur

ED-U-II/N3: Using First Angle Projection Method draw –

(a) Front View (b) Top View & (c) Right Hand Side View for the following

object.

ED-U-II/N4: Using First Angle Projection Method draw –

(a) Front View (b) Top View & (c) Left Hand Side View for the following object.

Prof. V.M.Patil Department of Mechanical Engineering RCPIT, Shirpur

ED-U-II/N5: Using Third Angle Projection Method draw –

(a)Front View (b) Top View & (c) Right Hand Side View for the following object.

ED-U-II/N6: Using First Angle Projection Method draw –

(a) Front View (b) Top View & (c) Right Hand Side View for the following object.

Prof. V.M.Patil Department of Mechanical Engineering RCPIT, Shirpur

ED-U-II/N7: Using Third Angle Projection Method draw –

(a) Front View (b) Top View & (c) Right Hand Side View for the following object.

ED-U-II/N8: Using Third Angle Projection Method draw –

(a) Front View (b) Top View & (c) Right Hand Side View for the following object.

Prof. V.M.Patil Department of Mechanical Engineering RCPIT, Shirpur

ED-U-II/N9: Using First Angle Projection Method draw –

(a) Front View (b) Top View & (c) Right Hand Side View for the following object.

ED-U-II/N10: Using Third Angle Projection Method draw –

(a) Front View (b) Top View & (c) Left Hand Side View for the following object.

Prof. V.M.Patil Department of Mechanical Engineering RCPIT, Shirpur

ED-U-II/11: Using First Angle Projection Method draw –

(a) Front View (b) Top View & (c) Right Hand Side View for the following object.

ED-U-II/N12: Using First Angle Projection Method draw –

(a) Sectional Front View (b) Top View & (c) Left Hand Side View for the following object.

Prof. V.M.Patil Department of Mechanical Engineering RCPIT, Shirpur

ED-U-II/N13: Using Third Angle Projection Method draw –

(a) Front View (b) Top View & (c) Left Hand Side View for the following object.

ED-U-II/N14: Using Third Angle Projection Method draw –

(a) Front View (b) Top View & (c) Right Hand Side View for the following object.

Prof. V.M.Patil Department of Mechanical Engineering RCPIT, Shirpur

ED-U-II/N15: Using Third Angle Projection Method draw –

(a) Front View (b) Top View & (c) Left Hand Side View for the following object.

ED-U-II/N16: Using Third Angle Projection Method draw – (a) Front View(b) Top View & (c)

Left Hand Side View for the following object.

Prof. V.M.Patil Department of Mechanical Engineering RCPIT, Shirpur

ED-U-II/N17: Using First Angle Projection Method draw – (a) Front View (b) Top View & (c)

Left Hand Side View for the following object.

ED-U-II/N18: Using First Angle Projection Method draw – (a) Front View (b) Top View & (c)

Left Hand Side View

Prof. V.M.Patil Department of Mechanical Engineering RCPIT, Shirpur

ED-U-II/N19: Using First Angle Projection Method draw – (a) Front View (b) Top View & (c)

Right Hand Side View for the following object.

ED-U-II/N20: Using First Angle Projection Method draw – (a) Front View(b) Top View & (c)

Right Hand Side View for the following object.

Prof. V.M.Patil Department of Mechanical Engineering RCPIT, Shirpur

ED-U-II/N21: Using First Angle Projection Method draw – (a) Front View,(b) Top View & (c)

Left Hand Side View for the following object.

ED-U-II/N22: Using Third Angle Projection Method draw – (a) Front View (b) Top View &

(c) Left Hand Side View

Prof. V.M.Patil Department of Mechanical Engineering RCPIT, Shirpur

ED-U-II/N23: Using Third Angle Projection Method draw – (a) Sectional Front View, sections

along X-X (b) Top View & (c) Right Hand Side View for the following object.

ED-U-II/N24: Using Third Angle Projection Method draw – (a) Front View (b) Top View &

(c) Right Hand Side View for the following object.

Prof. V.M.Patil Department of Mechanical Engineering RCPIT, Shirpur

ED-U-II/N25: Using First Angle Projection Method draw – (a) Front View (b) Top View & (c)

Left Hand Side View

ED-U-II/N26: Using First Angle Projection Method draw – (a) Front View (b) Left Hand Side

View

Prof. V.M.Patil Department of Mechanical Engineering RCPIT, Shirpur

ED-U-II/N27: Using First Angle Projection Method draw – (a) Front View (b) Top View & (c)

Left Hand Side View for the following object.

ED-U-II/N28: Using First Angle Projection Method draw – (a) Front View (b) Top View & (c)

Left Hand Side View

Prof. V.M.Patil Department of Mechanical Engineering RCPIT, Shirpur

ED-U-II/N29: Using Third Angle Projection Method draw – (a) Front View (b) Top View & (c)

Left Hand Side View