organisational management and enterpreneurship …
TRANSCRIPT
ORGANISATIONAL MANAGEMENT AND ENTERPRENEURSHIP
(15EC51T)
Department of Electronics and Communication engg. Jain polytechnic Belagavi
UNIT 1
1 Write a note on inter-personal skills. 5M-Apr-2018
2 Define Management. List the functions of management and explain
them.
10M-Apr-2018
5M-Apr-2019/Nov
2019/2020
3 List the benefits of SWOT-analysis. 5M-Nov-2017
4 a) Compare Team and Group.
b) Analyze the importance of knowing yourself or interpersonal skills.
10M-Nov-2017
5M-Apr-2019/nov
2019/2020
5 Identify the barriers for effective communication 5M-Apr-2019/2020
UNIT 2
1 Explain the methods of purchasing. 5M-Apr-2018/ nov
2019/2020
2 Explain stores management system. 10M-Apr-2018
3 Illustrate the types of production with their characteristics. 10M-Apr-2018/2020
4 Explain MRP and ERP. 10M-Apr-2018
10M-Apr-2019
5 Define MRP and ERP. 5M-Nov-2017
6 Classify and explain production process. 10M-Nov-2017
7 Explain break-even analysis with breakeven chart. 10M-Nov-2017
10M-Apr-2019
8 Illustrate the various inventory control techniques. And write its
functions
10M-Nov-2017/ nov
2019
9 Discuss the methods to improve the productivity 10M-Apr-2019/Nov
2019/April-2020
10 Explain Production ,Planning and control. 10M Nov
2019/April-2020
11 Explain
a) Breakeven Analysis
b) Logistic Management
Nov 2019
UNIT 3
1 Explain Pareto chart of TQM. 5M-Apr-2018
2 Describe the benefits of TPM. 5M-Apr-2018/2020
3 Describe flow chart and control of TQM. 10M-Apr-2018
10M-Apr-2019
4 Write the procedures to attain ISO registration. 10M-Apr-2018
5 List the types of TQM tools. 5M-Nov-2017/Nov
2019
6 Explain ISO 9000 series quality standards. 5M-Nov-2017/ nov
2019/2020
ORGANISATIONAL MANAGEMENT AND ENTERPRENEURSHIP
(15EC51T)
Department of Electronics and Communication engg. Jain polytechnic Belagavi
7 Describe flow chart and pareto chart of TQM with neat diagrams. 10M-Nov-2017/2020
5M-Apr-2019
8 Illustrate the different types of inspections. 10M-Nov-2017/ nov
2019
9 Describe Kaizen and Sigma TQM tools. 10M-Apr-2019/2020
10 Define planned maintenance and predictive maintenance. 5M-Apr-2019
11 Explain the use of quality circle and its objectives. 5M-Apr-2019/2020
12 Write the factors that affect quality. Nov 2019
13 Explain briefly different types of maintenance nov 2019/2020
UNIT 4
1 Explain indirect losses duties to accident. 5M-Apr-2018/2020
2 Mention the duties of safety inspector. 5M-Apr-2018
3 Illustrate the general safety rules. 10M-Apr-2018
10M-Apr-2019/ nov
2019
4 Mention the duties of safety supervisor. 5M-Nov-2017 nov
2019/2020
5 Explain the indirect losses due to accident. 5M-Nov-2017
6 Describe the types of fire extinguishers. 10M-Nov-2017
5M-Apr-2019
7 Describe the various causes of industrial accidents.and define accident. 5M-Apr-2019/nov
2019/2020
UNIT 5
1 Explain project planning. 5M-Apr-2018
2 Write scope and role of small scale industries 5M-Apr-2018/2019
3 Explain the factors which influence to start an enterprise. 10M-Apr-2020
4 Explain the sources of finance to start an enterprise. 10M-Apr-2018/ nov
2019
5 Define entrepreneur and entrepreneurship. 5M-Nov-2017/2020
6 Summarize the factors that influence entrepreneurship. 5M-Nov-2017
7 Explain the sources of finance to start an enterprise. 10M-Nov-2017
8 Write a note on market survey and market risks. 10M-Nov-2017
9 Describe the steps involved in project planning & preparation of project
report.
10M-Apr-2019
10 Write the procedure to start a small scale Industry 10M-Apr-2019/ nov
2019/2020
11 Evaluate the market risk involved in starting an enterprise 5M-Apr-2019/2019
ORGANISATIONAL MANAGEMENT AND ENTERPRENEURSHIP
(15EC51T)
Department of Electronics and Communication engg. Jain polytechnic Belagavi
12 List the qualities of an Entrepreneur. 10M nov 2019
13 Classify industries and explain briefly its features. 10M nov 2019/2020
UNIT 6
1 Write the different areas of employment opportunities. 5M-Apr-2018/ nov
2019/2020
2 Explain the sources of recruitment. 10M-Apr-2018
3 Mention the important causes for unemployment. 5M-Nov-2017
5M-Apr-2019/2020
4 a) Write and explain the different employment opportunities in India.
b) Express the steps/process in selection(scientific selection process).
10M-Nov-2017
a)5M-Apr-2019/ nov
2019
5 Express the method of psychometric tests 5M-Apr-2019/2020
6 Identify the causes of Employment 5M-Apr-2019/2020
7 Explain employment opportunities in Govt sector 10M nov 2019/2020
ARM CONTROLLER [15EC52T ]
Question Bank – Unit Wise
Department of Electronics& Communication Engineering, Jain Polytechnic Belagavi
Unit - 1
1 List the applications ofARM processor. 5M Dec-2017
Nov-2019
2 (a)Explain ARM CORE data flow model.
(b) Justify the feature that improves code density. 10M Dec-2017, Apr/May-
2020
3 (a)Explain bit structure of CPSR.
(b) Justify how ARM is suitable for mobile applications. 10M Dec-2017
4 List the special features of ARM processor design. 5M Apr/May-2018
5 a) Explain three stages pipelining of ARM 7 with
examples.
b) Discuss mode bits of CPSR registers.
10M Apr/May-2018
6 Explain ARM core data flow model with neat diagram. 10M Apr/May-2018
7 Describe the functions of flags CPSR register 5M April-2019
Nov-2019
8 Explain exception handling in arm processor 5M April-2019
9 Explain different ARM processor modes 6M Apr/May-2019
10 Explain banked registers with a neat diagram 10M Apr/May-2019
11 Define the following terms with respect to ARM7.
a) Pipelining
b) Banked register
c) R13
d) R14
e) R15
5M Apr/May-2020
12 Write a note on AMBA bus 5M Apr/May-2020
Unit-2
1 Explain Barrel shifter with a neat sketch. 5M Dec-2017, Apr/May-
2020
2 (a) Explain MVN, MRS and MSR instruction with example.
(b) Distinguish between post and pre indexed addressing
mode with an example
10M Dec-2017
Nov-2019
3 (a) Test whether the following instructions are pre or post
index addressing mode : (i) STR R6, [R4, #4] (ii) LDR R3,
[R12], #6 (iii) LDRB R4, [R3, R2] (iv) LDR R6, [R0, R1,
ROR # 6] (v) STR R3, [R0, R5, LSL # 3]
(b) Calculate the effective address of the following
instructions if Register R3 -0 x 4000 & register R4 = 0 x 20.
(i) STRH R9, [R3, R4] (ii) LDRB R8, [R3, R4, LSL #3] (iii)
LDR R7, [R3], R4 (iv) STRB R6. [R3], R4. ASR
#2 (v): LDR R0. [R3,- R4,lsl #3]
10M Dec-2017
4 Explain AND & EOR & PSR instructions with examples. 5M Apr/May-2018, Nov-
2019, Apr/May-2020
5 a) Explain five different shift operations that can used
with barrel shifters. 10M Apr/May-2018
ARM CONTROLLER [15EC52T ]
Question Bank – Unit Wise
Department of Electronics& Communication Engineering, Jain Polytechnic Belagavi
b) Write the instruction to perform the following
operations:
(i) Add number 256 to R1,place the sum in
register R2.
(ii) Place a 2’s complement of -1 into register R3.
(iii) AND ing, R1 content with the complement of
256, place the result in register R2.
(iv) To returning from subroutine.
(v) Copy a complement of 4 into R1.
6 Explain SWAP & SWI instructions with example. 5M Apr/May-2019,
Apr/May-2020
7 Expalain the different processor modes 7M Apr/May-2020
8 Write any 3 applications of ARM processor 5M Apr/May-2020
9 Predict the operation performed by the execution of
each compare instruction.
4M Apr/May-2020
Unit-3
1 Describe the following directives: EQU, SPACE, ALIGN,
DCD, DCW. 5M Dec-2017
2 Explain ARM-THUMB networking using BLX instruction. 5M Dec-2017
April-2019,
Apr/May-2020
3 (a) Compare ARM and THUMB instructions.
(b) Write an ALP to find largest number in an array. 10M Dec-2017
4 Describe the function of ENTRY, AREA
,DCD,DCB,DCWand SPACE assembler directives. 5M Apr/May-2018
April-2019,
Apr/May-2020
5 Explain register usage in thumb. 5M Apr/May-2018,
Apr/May-2020
6 a) Predict the operation performed by the execution of
each compare instruction.
b) Distinguish between post and pre indexed addressing
modes with an examples.
10M Apr/May-2018
7 a) Compare ARM and thumb instructions.
b) Write an ALP to find length of a null terminated
string.
10M Apr/May-2018
8 Explain TST & TEQ instructions with example 5M Apr/May-2019
9 Explain ARM & Thumb instructions 5M Apr/May-2019
10 Write an ALP to add to 32 bit numbers 5M Apr/May-2020
Unit-4
1 Write code for enabling IRQ and FIQ interrupts. 5M Dec-2017, Apr/May-
2020
2 Write code for disabling IRQ and FIQ interrupts. 5M Dec-2017
3 (b)Explain non-nested interrupt handler with a neat sketch.
(b) List the interrupt handling schemes. 10M Dec-2017
Apr/May-2019
ARM CONTROLLER [15EC52T ]
Question Bank – Unit Wise
Department of Electronics& Communication Engineering, Jain Polytechnic Belagavi
4 Write a note on exception priorities. 5M Apr/May-2018,
Apr/May-2020
5 Define the term interrupt latency and list the methods to
minimize latency.
5M Apr/May-2018
6 a) Differentiate between interrupts and exceptions.
b) Explain vector tables.
10M Apr/May-2018
7 Write code for enabling IRQ & FIQ interrupts 5M Apr/May-2019
8 List various interrupt handling schemes 5 Apr/May-2020
Unit-5
1 List any five features of RTC. 5M
Dec-2017
3 Name any five features of I2c. 5M Dec-2017
4 Sketch a memory map of LPC 2148. 10M Dec-2017
5 List any five features of LPC2148. 5M Apr/May-2018
Apr/May-2019
6 Discuss RESET and wake up timers. 5M Apr/May-2018
7 a) Explain the importance of brownout detector.
b) Explain power modes supported by LPC2148.
10M Apr/May-2018
Apr/May-2019
8 List any five features of UART. 5M Apr/May-2019
9 List any four features of Timer in LPC 2148 4M Apr/May-2019
10 List any five features of SPI in LPC2148 5M Apr/May-2020
11 Define watchdog timer.Explain the importance of brown out
detector.
5M Apr/May-2020
Unit-6
1 Explain the bit structure of PLL STAT register. 5M Dec-2017
2 Calculate the values of PLL configuration register (PLLCFG)
for the following frequency specification CCLK = 60 MHz,
PCLK = l5 MHz. PCLK is l56 MHz to 320 MHz, FOSC = 10
MHz.
b)List any four features of Timer in LPC2148.
10M Dec-2017
Apr/May-2020
3 (a) Write C program to interface LEDS to all pins in port 0
(P0.0 to P0.l5) make repeatedly blink all LEDs high then
low, then high and so on (Introduce some delay).
(b) List any four applications of GPIO.
10M Dec-2017
Apr/May-2020
Apr/May-2019
4 Sketch a neat block diagram of TIMER. 2
(b) List the Legacy GPIO registers.
(c) Explain legacy GPIO registers.
10M Dec-2017
Apr/May-2019
5 a) Name the applications of timers
b) Write embedded C statement to configure: 5M Apr/May-2018
ARM CONTROLLER [15EC52T ]
Question Bank – Unit Wise
Department of Electronics& Communication Engineering, Jain Polytechnic Belagavi
(i) Pin 19 of port 0 as output and want to drive it
high (logic 1)
(ii) Configuring first 16 pins of port 0 (P0.0 to
P0.15) has outputs and settings them high.
6 a) Sketch a neat block diagram of PLL.
b) Write a procedure for PLL frequency calculation
10M Apr/May-2018
7 a) List any five features of GPIO.
b) Explain the applications of GPIO
c) Choosing FOSE=10MHz and CCLK=60Hz
configure PLLO.
10M
5M
Apr/May-2018
Apr/May-2019
8 a) List any five features of timer in LPC2148.
b) Explain pin connect block of LPC.2148 10M Apr/May-2018,
Apr/May-2020
9 Define timer & PWR of LPC2148 5M Apr/May-2019
10 Explain the bit structure of PLLCFG register 5M Apr/May-2019
11 Sketch a neat block diagram of PLL 6M Apr/May-2019,
Apr/May-2020
12 Explain the registers used in pin connect block of Lpc2148 5M Apr/May-2020
ADVANCED COMMUNICATION [15EC53T ]
Question Bank – Unit Wise
Department of Electronics& Communication Engineering, Jain Polytechnic Belagavi
Unit - 1
1 Define waveguide. List the types of waveguides. 5M Apr-2018
Nov-2019
2 Explain construction and working, of two cavity klystron. 10M Apr-2018
Nov-2019/2020
3 Explain the construction and working of an lMPATT diode. 10M Apr-2018
4 List the applications of microwave signal.
5M Dec-2017
5 Explain the construction, working and application of
magnetron.
10M Dec-2017
6 Sketch the construction of a TWT and explain its working. 10M Dec-2017
Apr-2019
Nov-2019/2020
7 List the antenna Scanning and tracking Methods 5M Apr-2019/2020
Unit-2
1 Define average power and peak power. 5M Apr-2018
2 Compare A-scope and PPI displays. 5M Apr-2018
Apr-2019
3 Explain the working of FM-CW Radar. 10M Apr-2018
Nov-2019
4 Sketch the block diagram of MTI Radar & explain its
working. 10M Apr-2018
Nov-2019
5 Explain the factors that influence Radar range. 5M Dec-2017
Nov-2019/2020
6 Compare A-scope and PH display. 5M Dec-2017
Nov-2019
7 Derive the radar range equation. 10M Dec-2017/2020
8 Illustrate the working of ILS method of aircraft landing
system.
10M Dec-2017/2020
9 List any 5 applications of radar 5 Nov-2020
Unit-3
1 Explain apogee and perigee heights With a neat sketch. 5M Apr-2018
2 Explain LEO, MEO and GEO satellite. 10M Apr-2018
3 Define satellite and explain the satellite orbits. 5M Dec-2017/2020
4 (a) Define LEO, MEO & GEO.
(b) Explain apogee and perigee heights with a neat sketch.
10M Dec-2017
Nov-2019/2020
5 Explain UPLINK and Down link 5M Apr-2019
Nov-2019
6 Explain GPS 5M Apr-2019
7 Compare LEO, MEO and GEO satellite. 10M Apr-2019
8 Define station keeping and altitude control. 5 Nov-2020
ADVANCED COMMUNICATION [15EC53T ]
Question Bank – Unit Wise
Department of Electronics& Communication Engineering, Jain Polytechnic Belagavi
Unit-4
1 Define transponders and list the types of satellite
transponders.
5M Apr-2018
Nov-2019
2 (a) Explain methods of increasing the channel capacity of a
satellite.
(b) Explain power sub-system of a satellite.
10M Apr-2020
3 With a block diagram. explain satellite communication
system.
5M Dec-2017
Nov-2019/2020
4 (a) List the different types of satellite-subsystems.
(b) Explain single conversion transponder with a neat sketch.
10M Dec-2017
Unit-5
1 List the remote sensing applications of satellite.
5M Apr-2018
Nov-2019
2 Explain VSAT. 5M Apr-2018
Nov-2019/2020
3 Explain DTH system with neat figure. 10M Apr-2018 Apr-2019
Nov-2019/2020
4 List the satellite applications for different areas. 5M Dec-2017 Apr-2019
5 Explain the earth observation application of satellite. 5M Dec-2020
6 Explain GPS system with a neat sketch. 10M Dec-2017 Apr-2019
Unit-6
1 List the Zigbee network topologies. 5M Apr-2018
2 Explain 1G and 2G mobile systems. 5M Apr-2018
3 Explain the operation of GSM architecture with neat sketch. 10M Apr-2018
Nov-2019
4 Explain the features of Wi-Fi & Hot Spot technologies. 10M Apr-2018
5 (a) Explain the applications of zigbee.
(b) Illustrate the cell-splitting and cell selloring.
10M Apr-2018
Apr-2019
Nov-2020
6 Explain HandolT strategies.
5M Dec-2017
Nov-2019
Nov-2020
7 Write the importance of cell-splitting and cell-sectarian in
mobile networks.
5M Dec-2017
Nov-2020
8 (a) Define mobile communication and list the generations of
mobilecommunications.
(b) List the features of GSM system.
10M Dec-2017
Nov-2020
9 Explain the network topologies and applications of ZIGBEE. 10M Dec-2017
10 Explain the features of Wi-Fi and Hot-Spot technology. 10M Dec-2017, Nov-2020
ADVANCED COMMUNICATION [15EC53T ]
Question Bank – Unit Wise
Department of Electronics& Communication Engineering, Jain Polytechnic Belagavi
11 Explain the importance of frequency reuse in mobile
communication
5M Apr-2019
12 Explain the features of CDMA 2000 System 10M Apr-2019
Nov-2019
13 Mention any 5 applications of bluetooth 5 Nov-2019
14 Explain with neat diagram working of a typical cellular
system
10 Nov-2019 Nov-2020
APPLICATIONS OF ELECTRONICS AND ENGINEERING [15EC54T ]
Question Bank – Unit Wise
Department of Electronics& Communication Engineering, Jain Polytechnic Belagavi
Unit - 1
1 Write short notes on Xerox Machine. 5 Nov/Dec 2017
Nov/Dec 2018
Nov/Dec 2019
2 Write about working principle of Microwave cooking and
write the block diagram of Microwave oven.
10 Nov/Dec 2017
Apr-2018
April-2019/ Nov
2019/Nov-2020
3 What in a calculator? With a neat diagram explain Internal
organization of a Calculator.
10 Nov/Dec 2017
Apr-2019/ Nov
2019/Nov-2020
4 Distinguish between Barcode and QR code 5 Nov 2019
5 List 3 applications of duzzy logic control in washing machine 3 Nov 2019
6 Name any 3 features of printer 3 Nov 2019/2020
Unit-2
1 Explain Electronic ignition lock system. 5 Nov/Dec 2017
April-2018
April 2019/ Nov
2019
Nov-2020
2 Explain the following :
(a) ABS (b) Solar automobiles. 10 Nov/Dec 2017
Apr-2019
3 With block diagram explain vehicle proximity detection
system. 10 Nov/Dec 2017
Apr-2018/Nov-2020
4 Describe briefly the ultrasonic car safety belt systems 5 Nov 2019
5 Explain thje anti brake system with block diagram 5 Nov 2019
6 Explain theft detection and remote locking in vehicles. 5 Nov 2019/Nov-2020
7 Develop a vehicle navigation system and explain 5 Nov 2019/Nov-2020
Unit-3
1 List different types of Microphones headphones and Loud
Speakers. 5 Nov/Dec 2017
April-2018
Nov-2020
2 Explain the operation of any one headphone with neat figure. 5 Nov/Dec 2017
April-2018
April-2019
3 With relative diagram explain any two microphones. 10 Nov/Dec 2017
April-2019/Nov-
2020
4 Demonstrate how capacitive microphone works 5 Nov 2019
5 Describe the operation of moving iron head phone 5 Nov 2019
6 List five features of ideal loudspeaker 5 Nov 2019/Nov-2020
7 List five features’ of woofers 5 Nov 2019/Nov-2020
Unit-4
1 List image/ video capturing and displaying electronic
devices.
5 Nov/Dec 2017
April-2018/Nov-
APPLICATIONS OF ELECTRONICS AND ENGINEERING [15EC54T ]
Question Bank – Unit Wise
Department of Electronics& Communication Engineering, Jain Polytechnic Belagavi
2020
April-2019
2 Write a note on Smart TV. 5 Nov/Dec 2017
Apr-2018
April-2019/Nov-
2020
3 (a) Draw the block diagram of Color TV Receiver.
(b) Mention the features of digital camera.
10 Nov/Dec 2017
April-2018
4 Name any five features of crt 5 Nov 2019/Nov-2020
5 List five features of touch screen 5 Nov 2019
6 Compare analog tv with hdtv 5 Nov 2019
7 Explain working of plasma tv 5 Nov 2019
8 Differentiate LCD with LED monitor 5 Nov 2020
Unit-5
1 Mention atleast five electronic Musical Instruments. 5 Nov/Dec 2017
April-2018/ Nov
2019
April-2019
2 Mention the applications of virtual reality. 5 Nov/Dec 2017
Apr-2018
April-2019
3 (a)Write a note on electronic guitar.
(b) Write a short note on video gaming system.
10 Nov/Dec 2017
April-2018
April-2019
Nov-2020
4 Sketch and explain operation of electronic synthesizer 7 Nov 2019/Nov-2020
5 List 3 advantages of virtual reality systems 3 Nov 2020
Unit-6
1 Define robotics and list applications of robotics. 5 Nov/Dec 2017
April 2018/ Nov
2019/Nov-2020
2 Analyze the non-servo control system and servo control
system in robotic application] 10 Nov/Dec 2017
Nov/Dec 2018
April 2019/ Nov
2019/Nov-2020
3 (a) Explain degrees of freedom.
(b) List advantages and disadvantages of Robot
10 Nov/Dec 2017
April-2019/Nov-
2020
4 (a) Define Sensors. Classify different Robotic sensors.
(b) Define Actuators. Explain electrical actuators.
10 Nov/Dec 2017
April-2019/ Nov
2019/Nov-2020
5 Describe components of robotic system with neat diagram 10 Nov 2019
6 Explain components of vision system in robotics 7 Nov 2020
APPLICATIONS OF ELECTRONICS AND ENGINEERING [15EC54T ]
Question Bank – Unit Wise
Department of Electronics& Communication Engineering, Jain Polytechnic Belagavi