ordering guidelines summary - honeywell...

AIT-IV Ordering Guidelines SummaryW91QUZ-09-D-0044

Central Order Processing Offices

Chad SimsPD-AMISCOM: 703-325-1890FAX: [email protected]

Eddie Chase, AFMC 403 SCMS/GUEA, WPAFB Comm 937-656-9210. [email protected]

Lorrey BentzelNAVSUP N65Navy AIT Program Manager(717) 605-6724 DSN [email protected]

Mr. Tony Brill, Team Lead, USMC AIT, MARCORSYSCXOM, IS&I, Comm: (703) 432-5123, Fax: (703) 432-3352, Email: [email protected]

COPO currently not assigned. Contact US Army COPO POCs.

Ordering Guidelines SummaryFind the complete ordering instructions at the AIT Ordering Guide at http://home.intermec.com/AIT/

These offices perform a specific function regarding the processing of orders issued under the AIT‐IV contract. Orders must be processed by the appropriate COPO before being processed by the Contractor. Following review, the COPO will assign a UCN number, which is required to process all delivery and task orders.

The delivery orders are issued by any warranted Contracting Officer or other authorized credit card holder in the Department of Defense, Coast Guard, and other Federal agencies. PM J‐AIT is assigned as the COPO for the U.S. Coast Guard and other Federal agencies to receive and review all delivery orders from their respective service agency and, after reviewing and approving the order, forwards the order to Intermec.

U.S. Army, U.S. Coast Guard, and Other Federal Agencies

U.S. Air Force, AFMC-lso/loa

U.S. Marine Corps, Marine Corps Systems Command

U.S. NAVY, Naval Supply Systems Command

Defense Logistic Agency (DLA)

Section 9: CLIN List and Prices Changes Through P00025 - 05.15.13


Completing an SF1449 Order

Block Title Description

1 Requisition Number Enter assigned requisition number.2 Contract Number The contract number is: W91QUZ‐09‐D‐0044

3 Effective Date

This is the effective date of the order. In selecting the effective date, the contracting officer must consider the time required for COPO review, etc. to ensure the order is “mailed” to the contractor on/not later than the effective date of the order (FAR 11.403).Enter the locally assigned number.Note: Only ITEC4 may use numbers 0001 – 9999.

9 Issued By

Your contracting office name, address, and the name and commercial telephone number of the individual who prepared the order and can answer questions regarding it. The code to be included in this block is the six‐digit DODACC for your activity.

11 Destination Indicates the delivery destination.12 Discount Terms Leave blank.13a DPAS Rated Block 13a is checked (X) if an order has been assigned a rating.13b Rating If a rating is required for the order, enter DO/A7 in Block 13.

This block must contain the name and commercial phone number of a single POC for the entire order; as well as the delivery address, DoDAAC, and email address. If an order includes multiple Ship To addresses, a POC for each of these locations must be provided in addition to a POC for the entire order. “See Schedule” may be entered in Block 15 and ship to information listed on the “Continuation Sheet” of the SF 1449.

Note: Orders received without this information cannot be accepted.CODE: S4801ADCMA SEATTLE188 106TH AVE NESuite 660BELLEVUE, WA 98004

Order Number

15 Deliver To

16 Administered By

4

Form SF 1449 is used to purchase commercial items when simplified acquisition procedures are used. An SF 1449 form is issued for each order to ship and receive products. The required blocks must be completed in order for the request to be filled. Standard Form 30 should be used to modify the order. The required fields to complete form SF 1449 are as follows:



Must list the contractor’s address as follows:Intermec Technologies CorporationShannon Landis (Code: 33825)6001 36th Avenue WestEverett, WA 98203‐9280Must list the Payment Office as follows:All orders purchased with DoD funds:CODE: HQ0339DFAS – Columbus CenterWest Entitlement OperationsP.O. Box 182381Columbus, OH 43218‐2381All orders purchased with Non‐DoD funds must list the appropriate Payment Office annotated on the individual order.

The line item taken from contract. This block contains the appropriate Contract Line Item Number (CLIN) and/or Subcontract Line Item Number (SLIN) from the Schedule of Supplies/Services on the AIT‐IV contract. Only assigned CLINs may be used to order items and services from this contract.

Note: Do not use any other numbers in this block. DFAS needs the CLIN/SLIN numbers to be reflected on the SF 1449 in order to do initial entry of orders into their automated payment system. When the Contractor submits a request for payment, DFAS will compare the request for payment of CLIN/SLINs with the order CLIN/SLINs. Use of item numbers in Block 19 on the SF 1449 and not CLIN/SLIN numbers will result in payment delays and excessive administrative costs to both the Contractor and the Government.

20Schedule of Supplies/ Services (includes Continuation Sheet)

Information to be entered to include: UCN, description of supplies and services and delivery schedule.

21 Quantity Quantity ordered.22 Unit Unit of measure.23 Unit Price Unit price.24 Amount The dollar amount ordered.

25 Accounting and Appropriation DataEnter the accounting and appropriation line to be charged. For DoD orders, enter the Accounting Classification Reference Number (ACRN).

26 Total Award Amount The total award amount.31a Signature32a Received and Accepted

19 Item Number

17a

18a

Contractor

Payment Will be Made By



32b Government Signature32c Date33 Ship Number42a Signature42c Date


AIT-IV Ordering CatalogW91QUZ-09-D-0044Option Period 1

CLIN # Description UM Unit Price

1001 Hand Held Barcode Terminals1001AA Hand Held Barcode Terminal (HHT‐A) with Abbreviated Keypad and Wireless (802.11g/i)

Communications

Intermec CN3G: CN3BRH80000Z4G8 (BT enabled) or CN3BRH80000Z4G6 (BT disabled)Num,Aimg/SH,804,NoGPS,WM6 WWEIncludes Mini‐SD Card, 2GB (installed in HHT)Intermec 871‐025‐002 CN3 Charger / Communications DockIntermec model 9004‐AE01 Universal Power SupplyIntermec 318‐016‐102 CN3 Operational and Spare BatteryIntermec 714‐626‐001 CN3 Operational and Spare StylusIntermec 321‐576‐004 USB Interface CableCAC Reader ‐ Apriva BT200‐T Bluetooth CAC Reader with CAC enablement softwareIntermec 946‐002‐xxx CD Documentation AIT IVCountry Specified Power Cord ‐ variable P/NNote: Intermec Model AR6(850‐818‐xxx) CN3 CAC Reader (USB Snap‐on) is available upon customer request at no additional cost, in lieu of the Apriva BT200‐T CAC Reader.

EA 1,553

1001AB HHT‐A Holster and Shoulder StrapIntermec 825‐207‐001 CN3 Holster with Shoulder Strap

EA 63

1001AC HHT‐A Detachable Handle and Trigger (if available and not inherent to the HHT)Intermec 203‐839‐101 CN3 Series Scan handle

EA 69

1001AD HHT‐A Rechargeable BatteryIntermec 318‐016‐102 CN3 Extended Battery Pack

EA 52

1001AE HHT‐A Multiple (4) Battery ChargerIntermec 852‐065‐101 Battery Charger, Quad, CN3Intermec model 9004‐AE01 Universal Power SupplyCountry Specified Power Cord ‐ variable P/N

EA 312

1001AF HHT‐A Transparent, Flexible Dust CoverIntermec 655‐117‐101 CN3 Dust Cover

EA 16

1001AG HHT‐A One pack of 12 tethered replacement styliIntermec 203‐812‐101 Kit, Stylus, tethered CN3 Series (12 pack)

EA 39

Section 9: CLIN List and Prices Page 1 of 23 Changes Through P00025 - 05.15.13



1001BA Hand Held Barcode Terminal (HHT‐B) with Abbreviated Keypad and Batch Communications (No Wireless Capability)Intermec CN3G: CN3BRH80000Z4G5Num,Aimg/SH,804,NoGPS,WM6 WWEIncludes Mini‐SD Card, 2GB (installed in HHT)Intermec 871‐025‐002 CN3 Charger / Communications DockIntermec model 9004‐AE01 Universal Power SupplyIntermec 318‐016‐102 CN3 Operational and Spare BatteryIntermec 714‐626‐001 CN3 Operational and Spare StylusIntermec 321‐576‐004 USB Interface CableIntermec Model AR6(850‐818‐xxx) CN3 CAC ReaderIntermec 946‐002‐xxx CD Documentation AIT IVCountry Specified Power Cord ‐ variable P/N

EA 1,553

1001BB HHT‐B Holster and Shoulder StrapIntermec 825‐207‐001 CN3 Holster with Shoulder Strap

EA 63

1001BC HHT‐B Detachable Handle and Trigger (if available and not inherent to the HHT)Intermec 203‐839‐101 CN3 Series Scan handle

EA 69

1001BD HHT‐B Rechargeable BatteryIntermec 318‐016‐102 CN3 Extended Battery Pack

EA 52

1001BE HHT‐B Multiple (4) Battery ChargerIntermec 852‐065‐101 Battery Charger, Quad, CN3Intermec model 9004‐AE01 Universal Power SupplyCountry Specified Power Cord ‐ variable P/N

EA 312

1001BF HHT‐B Transparent, Flexible Dust CoverIntermec 655‐117‐101 CN3 Dust Cover

EA 16

1001BG HHT‐B One pack of 12 tethered replacement styliIntermec 203‐812‐101 Kit, Stylus, tethered CN3 Series (12 pack)

EA 39




1001CA Hand Held Barcode Terminal (HHT‐C) with Full Alpha‐numeric Keypad and Wireless (802.11g/i) Communications, and Win Mobile 6.x InstalledIntermec CN3eG: CN3FWH80000Z4G8 (BT enabled) or CN3FWH80000Z4G6 (BT disabled)Alpha,Aimg/SH,804,NoGPS,WM6 WWEIncludes Mini‐SD Card, 2GB (installed in HHT)Intermec 871‐025‐002 CN3 Charger / Communications DockIntermec model 9004‐AE01 Universal Power SupplyIntermec 318‐016‐102 CN3 Operational and Spare BatteryIntermec 714‐626‐001 CN3 Operational and Spare StylusIntermec 321‐576‐004 USB Interface CableCAC Reader ‐ Apriva BT200‐T Bluetooth CAC Reader with CAC enablemtn softwareIntermec 946‐002‐xxx CD Documentation AIT IVCountry Specified Power Cord ‐ variable P/NNote: Intermec Model AR6(850‐818‐xxx) CN3 CAC Reader (USB Snap‐on) is available upon customer request at no additional cost, in lieu of the Apriva BT200‐T CAC Reader.

EA 1,640

1001CB HHT‐C Holster and Shoulder StrapIntermec 825‐207‐001 CN3 Holster with Shoulder Strap

EA 60

1001CC HHT‐C Detachable Handle and Trigger (if available and not inherent to the HHT)Intermec 203‐839‐101 CN3 Series Scan handle

EA 66

1001CD HHT‐C Rechargeable BatteryIntermec 318‐016‐102 CN3 Extended Battery Pack

EA 49

1001CE HHT‐C Multiple (4) Battery ChargerIntermec 852‐065‐101 Battery Charger, Quad, CN3Intermec model 9004‐AE01 Universal Power SupplyCountry Specified Power Cord ‐ variable P/N

EA 296

1001CF HHT‐C Transparent, Flexible Dust CoverIntermec 655‐141‐001 CN3e Dust Cover

EA 15

1001CG HHT‐C One pack of 12 tethered replacement styliIntermec 203‐812‐101 Kit, Stylus, tethered CN3 Series (12 pack)

EA 37

1001CH




1001CJ Hand Held Barcode Terminal (HHT‐C) with Full Alpha‐numeric Keypad, Wireless (802.11g/i) Communications, and Win Mobile 5.0 InstalledIntermec CN3eG: CN3FWH84000Z1G6Alpha,Aimg/SH,804,NoGPS,WM5 WWEIncludes Mini‐SD Card, 2GB (installed in HHT)Intermec 871‐025‐002 CN3 Charger / Communications DockIntermec model 9004‐AE01 Universal Power SupplyIntermec 318‐016‐102 CN3 Operational and Spare BatteryIntermec 714‐626‐001 CN3 Operational and Spare StylusIntermec 321‐576‐004 USB Interface CableIntermec Model AR6(850‐818‐xxx) CN3 CAC ReaderIntermec 946‐002‐xxx CD Documentation AIT IVCountry Specified Power Cord ‐ variable P/N

EA

1001CK Win Mobile 6.X Upgrade Option (Self Installable)Intermec 238‐055‐001CN3 Upgrade Kit, Windows Mobile 6 Classic

EA

1001DA Hand Held Barcode Terminal (HHT‐D) with Full Alpha‐numeric Keypad and Batch Communications (No Wireless Capability)Intermec CN3eG: CN3FWH80000Z4G5Alpha,Aimg/SH,804,NoGPS,WM6 WWEIncludes Mini‐SD Card, 2GB (installed in HHT)Intermec 871‐025‐002 CN3 Charger / Communications DockIntermec model 9004‐AE01 Universal Power SupplyIntermec 318‐016‐102 CN3 Operational and Spare BatteryIntermec 714‐626‐001 Operational and Spare StylusIntermec 321‐576‐004 USB Interface CableIntermec Model AR6(850‐818‐xxx) CN3 CAC ReaderIntermec 946‐002‐xxx CD Documentation AIT IVCountry Specified Power Cord ‐ variable P/N

EA 1,603

1001DB HHT‐D Holster and Shoulder Strap

Intermec 825‐207‐001 CN3 Holster with Shoulder Strap

EA 60

1001DC HHT‐D Detachable Handle and Trigger (if available and not inherent to the HHT)

Intermec 203‐839‐101 CN3 Series Scan handle

EA 66

1001DD HHT‐D Rechargeable Battery

Intermec 318‐016‐102 CN3 Extended Battery Pack

EA 49




1001DE HHT‐D Multiple (4) Battery ChargerIntermec 852‐065‐101 Battery Charger, Quad, CN3Intermec model 9004‐AE01 Universal Power SupplyCountry Specified Power Cord ‐ variable P/N

EA 296

1001DF HHT‐D Transparent, Flexible Dust CoverIntermec 655‐141‐001 CN3e Dust Cover

EA 15

1001DG HHT‐D One pack of 12 tethered replacement styli Intermec 203‐812‐101 Kit, Stylus, tethered CN3 Series (12 pack)

EA 37

1001EA Hand Held Barcode Terminal (HHT‐E) with Extended Reading Range, Full Alpha‐numeric Keypad, and Wireless 802.11i a/b/g/n Communication with Windows Embedded HHT 6.5.3, VGA Touch Screen and WiFi Certified for WPA and WPA2

CK71GA4MN00H1A40 ‐ AlphaNum, EX25, NoC, WLAN, WEH‐P, WWE, 802/BT,0” SSDAlphaNum: Alpha‐numeric Keypad, EX25: Near/Far long‐range imager, NoC: No Camera, WLAN Only: No WWAN, WEH‐P: Windows Embedded Handheld – Premium edition, WWE: World‐wide English, 802/BT: WiFi & BluetoothDX1A02B20 ‐Desktop,USB,Batt,CK70/71,NoPwrCd, EU, 851‐095‐1xx Univ Supply, 12V 48W, RA 2.5x5.5 Level V871‐238‐001 Ether Mod, Single Dk‐FlexDk/CN3/CN50/CK3 (included only upon request)321‐576‐004 Cable, USB‐A to USB‐B, 2meter RoHS318‐046‐111 Operational and Spare Battery Pack, CK70/71 203‐928‐001 Kit, Tethered Stylus, CK70/71 (5/pk)MICRO‐SD CARD, 2GBBT200‐T ‐ Bluetooth Common Access Card Reader with CAC enablement software851‐097‐001 USB Power Adapter, 5V 2.5W, Level V RoHS 946‐002‐xxx CD Documentation AIT IVCountry Specified Power Cord ‐ variable P/N NOTE: Naval Surface Warfare Center, Dahlgren tested for Hazards of Electromagnetic Radiation to Ordnance (HERO) and the recommended safe distance separation is 0 inches.

Note: In order to use the HHT wirelessly in FIPS mode SLIN 1031GB must be purchased separately

EA 2,062

1001EB HHT‐E Holster and Shoulder Strap815‐075‐101 Holster, CK71 w/ Scan Handle

EA 60

1001EC HHT‐E Detachable Handle and Trigger (if available and not inherent to the HHT)805‐836‐101 Scan Handle, CK71

EA 66




1001ED HHT‐E Rechargeable Battery318‐046‐111 Battery Pack, CK70/CK71

EA 34

1001EE HHT‐E Multiple (4) Battery ChargerDX2G4BB20 4‐pos Battery Chgr CK3/CK7x No Pwr Cord 851‐095‐121 Univ Supply, 12V 48W, RA 2.5x5.5 Level VCountry Specified Power Cord ‐ variable P/N

EA 254

1001EF HHT‐E Semi‐transparent, Flexible Dust CoverNA – Ck71 is IP67 rated sealed dust tight with gorilla glass and dust cover is not required

EA 15

1001EG HHT‐E One pack of 12 tethered replacement styli203‐928‐001 Kit, Tethered Stylus, CK70/71 (5/pk) x 3 packs

EA 41

1001FA Hand Held Barcode Terminal (HHT‐F) with Direct Part Mark Reading Capability, Full Alpha‐numeric Keypad, and Wireless (802.11g/i) Communications Hand Held Barcode Terminal (HHT‐F) with Direct Part Mark Reading Capability, Full Alpha‐numeric Keypad, and Wireless (802.11i a/b/g/n) Communications, Windows Embedded HHT 6.5.3, VGA Touch Screen and WiFi Certified for WPA and WPA2CK71GA4KN00H1A40 ‐ AlphaNum, EA30, NoC, WLAN, WEH‐P, WWE, HERO, 802/BTAlphaNum: Alpha‐numeric Keypad, EX25: Near/Far long‐range imager, NoC: No Camera, WLAN Only: No WWAN, WEH‐P: Windows Embedded Handheld – Premium edition, WWE: World‐wide English, 802/BT: WiFi & BluetoothDX1A02B20 ‐Desktop,USB,Batt,CK70/71,NoPwrCd, EU, 851‐095‐1xx Univ Supply, 12V 48W, RA 2.5x5.5 Level V871‐238‐001 Ether Mod, Single Dk‐FlexDk/CN3/CN50/CK3 (included only upon request)321‐576‐004 Cable, USB‐A to USB‐B, 2meter RoHS318‐046‐111 Operational and Spare Battery Pack, CK70/71 203‐928‐001 Kit, Tethered Stylus, CK70/71 (5/pk)MICRO‐SD CARD, 2GBBT200‐T ‐ Bluetooth Common Access Card Reader with CAC enablement software851‐097‐001 USB Power Adapter, 5V 2.5W, Level V RoHS 946‐002‐xxx CD Documentation AIT IVCountry Specified Power Cord ‐ variable P/N NOTE: Naval Surface Warfare Center, Dahlgren tested for Hazards of Electromagnetic Radiation to Ordnance (HERO) and the recommended safe distance separation is 0 inches.

Note: In order to use the HHT wirelessly in FIPS mode SLIN 1031GB must be purchased separately

EA 1,797

1001FB HHT‐E Holster and Shoulder Strap815‐075‐101 Holster, CK71 w/ Scan Handle

EA 60




1001FC HHT‐E Detachable Handle and Trigger (if available and not inherent to the HHT)805‐836‐101 Scan Handle, CK71

EA 66

1001FD HHT‐E Rechargeable Battery318‐046‐111 Battery Pack, CK70/CK71

EA 34

1001FE HHT‐E Multiple (4) Battery ChargerDX2G4BB20 4‐pos Battery Chgr CK3/CK7x No Pwr Cord 851‐095‐121 Univ Supply, 12V 48W, RA 2.5x5.5 Level VCountry Specified Power Cord ‐ variable P/N

EA 254

1001FF HHT‐E Semi‐transparent, Flexible Dust CoverNA – Ck71 is IP67 rated sealed dust tight with gorilla glass and dust cover is not required

EA 15

1001FG HHT‐E One pack of 12 tethered replacement styli203‐928‐001 Kit, Tethered Stylus, CK70/71 (5/pk) x 3 packs

EA 41

1005 Barcode Imagers/Scanners1005AA Imager for PC Input ‐ General Bar Code (w/Data Conversion)

Intermec SR61TG: SR61TGHP‐001 SR61TG Area Imager (EA30), World Intermec 236‐219‐001 CBL, USB, Coiled 3ft to 8ft Intermec 203‐878‐001 Desktop Stand SR61T

EA 590

1005BA Imager for PC Input ‐ Reads IUID Direct Part Markings (w/Conversion)SR61THD DPM Indt High Dens Area Im, AIT4203‐878‐001 Desktop Stand203‐876‐002 ‐ Wall or Vehicle Mount Holder236‐240‐001 ‐ Cable USB 2.0, 6.5 feet

EA 750

1005CA Magnetic Stripe and Bar Code ReaderId Tech #WCR3237‐733UOmni Heavy Duty Slot ReaderMagnetic Stripe Reader with Tracks 1, 2 and 3Barcode Reader with InfraredUSB Interface

EA 339

1009 Barcode Printers




1009AA Portable/Wearable Bar Code Label Printer 123‐100258 P4D Printer Kit that includesZebra P/N: Zebra P4D‐0U100000‐G2Portable Bar Code Label Printer, Shoulder Strap and Operational Battery CT18499‐1 Spare Battery BL18590‐1 USB Cable AT18913‐002 Power Supply BL17205‐1 Cable RS232 to HHT

Adapter: Select:850‐558‐xxx ‐ Adapter, CN3 Type, RS232 (Snap‐on adapter for enabling RS232 or DEX cabled support from bottom of CN3 (CLIN 0001AA) or CN3e (CLIN 0001CA)). OR 850‐815‐xxx ‐ Adapter, CK3 Type, RS‐232 (Snap‐on adapter for enabling RS232 support from the bottom of the CK3 (CLINs 0001EA & 0001FA)).

EA 1,484

1009AB Rechargeable Battery for Portable/Wearable BC Label PrinterZebra CT18499‐1 Battery Pack

EA 115

1009AC Battery Charger for Portable/Wearable BC Label PrinterZebra AT17696‐1 Charger

EA 83

1009AD Carrying Case with Strap for Portable/Wearable BC Label PrinterZebra DA18923‐1 Soft Case

EA 61

1009AE 4" x 6" Label and Ribbon Set for Portable/Wearable BC Label Printer

Zebra 10008424K

EA 62

1009BA Portable/Stationary Bar Code Label PrinterIntermec PF8G: PF8TG03000000USB Cable, Companion CD w/Windows Drivers, LabelShop & ManualsIntermec 946‐002‐xxx CD Documentation AIT IVCountry Specified Power Cord ‐ variable P/N

EA 376

1009BB Carrying Case with Strap for Portable/Stationary BC Label PrinterIntermec 825‐206‐001 Carrying Case for PF8t (soft)

EA 71

1009BC Roll of 4" by 6" Synthetic Label Stock for Portable/Stationary BC Label PrinterIntermec E22104 BL 4.000 X 6.000 POLYETH 3 MIL

EA 22

1009BD Resin Ribbon for 4" Width Labels for Portable/Stationary BC Label PrinterIntermec 13634012

EA 11




1009CA Stationary Bar Code Label PrinterIntermec PD42G: PD42GJ1100001020 Internal Rewinder Kit and Ethernet Module Installed USB Cable, RS232 Serial (DB9F), USB Port, Parallel IEEE 1284, User QuickStart Guide, Companion CD w/Windows Drivers, LabelShop & Manuals Intermec 946‐002‐xxx CD Documentation AIT IV Country Specified Power Cord ‐ variable P/N

EA 908

1009CB Roll of 4" by 6" Synthetic Label Stock (8 inch diameter roll) for Stationary BC Label PrinterIntermec E22103 BL 4.000 X 6.000 POLYETH 3 MIL

EA 42

1009CC Roll of 4" by 3" Synthetic Label Stock (8 inch diameter roll) for Stationary BC Label PrinterIntermec E23641

EA 63

1009CD Resin Ribbon for 4" Width Labels for Stationary BC Label PrinterIntermec 13574106

EA 15

1009DA Stationary Bar Code Label Printer with installed Take‐Up ReelIntermec PD42G: PD42GJ1100001020PD42 ‐ with installed take up reelInternal Rewinder Kit and Ethernet Module InstalledUSB Cable, RS232 Serial (DB9F), USB Port, Parallel IEEE 1284, User QuickStart Guide, Companion CD w/Windows Drivers, LabelShop & ManualsIntermec 946‐002‐xxx CD Documentation AIT IVCountry Specified Power Cord ‐ variable P/N

EA 956

1009EA Stationary Bar Code Label Printer with 802.11g/i Wireless CommunicationsIntermec PD42GJ2100001020WIFI Module, Take up Reel and Ethernet Module InstalledUSB Cable, Self Strip, RS232 Serial (DB9F), USB Port, Parallel IEEE 1284, User QuickStart Guide, Companion CD w/Windows Drivers, LabelShop & ManualsIntermec 946‐002‐xxx CD Documentation AIT IVCountry Specified Power Cord ‐ variable P/N

EA 974

1009FA Stationary Bar Code and Gen2 RFID Label Printer/EncoderIntermec PM4G: PM4DG11410005020RFID Module installedUSB Cable, Self Strip, RS232 Serial (DB9F), USB Port, Ethernet Port, Barwand interface, Compact Flash slot, RS‐232 Cable and Companion CD w/Windows Drivers, LabelShop & ManualsUser & Installation ManualsIntermec 946‐002‐xxx CD Documentation AIT IVCountry Specified Power Cord ‐ variable P/N

EA 2,200




1009FB Roll of Plastic 4" by 6" Gen2 RFID Labels ‐ General Purpose ‐ (8 inch diameter roll) for Stationary BC Label PrinterIntermec ILR00209

EA 149

1009FC Roll of Plastic 4" by 2" Gen2 RFID Labels ‐ General Purpose ‐ (8 inch diameter roll) for Stationary BC Label Printer

Intermec ILR00208

EA 306

1009FD Resin Ribbon for 4" width labels for Stationary Bar Code and Gen2 RFID Label Printer/Encoder

Intermec 13574106

EA 15

0015 Wireless Radio Frequency Data Communications0015AA Radio Frequency Access Point (indoor environment)

AP‐105‐1‐ Aruba 105 Wireless Access Point, TAA Compliant**NOTE: this AP does not require a separate mounting kit NOTE: Naval Surface Warfare Center, Dahlgren tested for Hazards of Electromagnetic Radiation to Ordnance (HERO) and the recommended safe distance separation is 0 inches

EA 504

0015BA Radio Frequency Access Point (NEMA Enclosure)AP‐105‐1‐ Aruba 105 Wireless Access Point, TAA CompliantAP‐105‐MNT‐DC – Aruba 105 Access Point Mounting Kit203‐944‐002 Nema EnclosureNOTE: Naval Surface Warfare Center, Dahlgren tested for Hazards of Electromagnetic Radiation to Ordnance (HERO) and the recommended safe distance separation is 0 inches

EA 647

0015CA Radio Frequency GatewayARUBA 3200‐XXF1 Controller FIPS/TAAincludesLIC‐8‐AP Access Point License (8 Access Point License )LIC‐RFP‐8 RFP License (WIP+Spectrum) (8 APs)LIC‐XSC‐32 xSec Module License (32 Sessions)LIC‐PEF‐32 Policy Enforcement Firewall Module License (32 Users)This product will provide 802.11i FIPS 140‐2 compliancy when utilized with Juniper OAC FIPS edition client SW for the HHTs (CLIN0031GB).

EA 6,795

0019 Contact Memory Buttons




0019AA Contact Memory Button, Small Size, 32k (Pack of 100 each)Intermec 591971‐001 MacSema BMEWK32 Contact Memory Button: 32KQuantity 100

EA 1,239

0019BA Contact Memory Button, Small Size, 64k (Pack of 100 each)Intermec 591972‐001 MacSema BMEWK64 Contact Memory Button: 64KQuantity 100

EA 1,571

0019CA Contact Memory Button Probe, Small (for HHT)Intermec 236‐220‐001 MacSema Contact Memory Button Probe, Combo mini/small with mini USB connector, Users Manual

EA 120

0019DA Contact Memory Button Probe, Small (for PC)Intermec 236‐220‐101 MacSema Mini/Micro ButtonLink, with USB Interface Cable, Users Manual

EA 164

0019EA Contact Memory Button, Micro, 4k (Pack of 100 each)Intermec 591969‐001 MacSema BTEWK4 Contact Memory Button: 4KQuantity 100

EA 882

0019FA Contact Memory Button Probe, Micro (for HHT)Intermec 236‐220‐001 MacSema Contact Memory Button Probe, Combo mini/small with mini USB connector, Users Manual

183

0019GA Contact Memory Button Probe, Micro (for PC)Intermec 236‐220‐101MacSema Mini/Micro ButtonLink, Tube Style, with USB Interface Cable, Users Manual

EA 197

00211021AA IUID Marking Equipment and Verifiers1021BA IUID Part Marking Integrated Configuration, includes label and part marking equipment, verifier, PC, and

softwareID Integration IUID marking cart : SYLCIDI‐M50‐LT1System includes:Epilog 50 watt CO2 Mini 24 laser marking system with CDRH Class III work enclosureSentry Air FA1 air filtration system, Intermec PD42G printer, CAC enabled semi rugged Laptop PC, Microscan UID verifier, Cognex Dataman 7500 handheld imager.IUID Marking Integration Software

Approximate dimensions of the cart system are 30” Wide x 65” length x 45” high

EA 73,388




1021CA IUID Part Marking Laser for labels and small partsID Integration laser marking system: SYLMAF‐M501System includes:Epilog 50 watt CO2 Mini Laser marking system with CDRH Class III work enclosure and stand.Fumex FA1 air filtration system with HEPA and activated carbon filters.

EA 28,571

1021DA IUID Part Marking Dot Peen Equipment for Data plates and small partsID Integration portable dot peen marking system: SYDPSIC‐P122‐1System includes:SIC e8‐p122 portable dot peen marking system with Ethernet interface card.

Flexible column and base to allow marking in a fixed column with the added capability to mark parts with handheld dot peen marking.

EA 19,238

1021EA Verifier for IUID Direct Part Marks (desktop)ID Integration desktop verifier for direct part marking: HWVRSIEUIDDPMMicroscan IUID compliance verifier for direct part marking.System includes Kaiser stand

EA 14,630

Verifier for IUID Labels (desktop)ID Integration desktop verifier for labels and data plates: HWVRSIE‐2Microscan IUID compliance verifier for labels and data plates.System includes power cord, network cable, RS 232 communication cable, and UID checker software.

EA 10,569

1023 Transit Cases And Transit Case Configurations




1023AA Transit Case Configuration for Five (5) Hand Held Barcode Terminals (HHT‐C) With Win Mobile 6.X (Latest Version) OS , Full Keypad and 802.11g/i wireless communicationsIntermec 655‐142‐001 Rugged Aluminum Transit Case Including:Intermec CN3eG: CN3FWH80000Z4G8 (BT enabled) or CN3FWH80000Z4G6 (BT disabled)Alpha,Aimg/SH,804,NoGPS,WM6 WWE, Qty 5

Includes Mini‐SD Card, 2GB (installed in HHT), qty 5

Intermec 871‐025‐002 CN3 Charger / Communications Dock, qty 5 Intermec Model 9004 –AE01 Universal Power Supply, Qty 6 Intermec 318‐016‐102 CN3 CN3 Operational and Spare Battery, qty 5 sets Intermec 714‐626‐001 CN3 Operational and Spare stylus, qty 5 Intermec 321‐576‐004 USB Interface Cable, qty 5CAC Reader ‐ Apriva BT200‐T Bluetooth CAC Reader with CAC enablement software, qty 5

Note: Intermec Model AR6 (850‐818‐xxx) CN3 CAC Reader (USB Snap‐on) is available upon customer request at no additional cost, in lieu of the Apriva BT200‐T CAC Reader.

Intermec 825‐207‐001 CN3 Holster and Shoulder Strap, qty 5 Intermec 203‐839‐101 CN3 Series Scan Handle, qty 5 Intermec 852‐065‐101 CN3 Multiple Battery Charger

AP‐105‐1‐ Aruba 105 Wireless Access Point, TAA CompliantAP‐105‐MNT‐DC – Aruba 105 Access Point Mounting Kit203‐944‐002 Nema EnclosureAP‐AC‐UN Universal Power AdapterPD‐3501G‐AC 1 Port 802.3af PoE Midspan 10/100/1000 15.4W

Country specified power cord‐ variable P/N, qty 6Intermec 942‐002‐XXX CD Documentation AIT‐IVTraining for 0023AA Transit Case on CD

EA 10,913




1023AB Transit Case Configuration for Five (5) Hand Held Barcode Terminals (HHT‐C) With Win Mobile 5.0 OS , Full Keypad and 802.11g/i wireless communicationsIntermec 655‐142‐001 Rugged Aluminum Transit Case Includes Mini‐SD Card, 2GB (installed in HHT), qty 5Includes Mini‐SD Card, 2GB (installed in HHT), qty 5

Intermec 655‐142‐001 Rugged Aluminum Transit Case Including: Intermec CN3eG: CN3FWH84000Z1G6 Alpha,Aimg/SH,804,NoGPS,WM5 WWE, qty 5 Intermec 825‐207‐001 CN3 Holster and Shoulder Strap, qty 5 Intermec 203‐839‐101 CN3 Series Scan Handle, qty 5 Intermec 318‐016‐102 CN3 CN3 Operational and Spare Battery, qty 5 sets Intermec 714‐626‐001 CN3 Operational and Spare stylus, qty 5 Intermec 321‐576‐004 USB Interface Cable, qty 5 Intermec Model AR6 (850‐818‐xxx) CN3 CAC Reader, qty 5 Intermec 871‐025‐002 CN3 Charger / Communications Dock, qty 5 Intermec 852‐065‐101 CN3 Multiple Battery Charger Intermec Model 9004‐AE01 Universal Power Supply, qty 6

Country specified power cord‐variable P/N, qty 6

AP‐105‐1‐ Aruba 105 Wireless Access Point, TAA CompliantAP‐105‐MNT‐DC – Aruba 105 Access Point Mounting Kit203‐944‐002 Nema EnclosureAP‐AC‐UN Universal Power AdapterPD‐3501G‐AC 1 Port 802.3af PoE Midspan 10/100/1000 15.4W

Intermec 942‐002‐xxx CD Documentation AIT‐IV Training for 0023AA Transit Case on CD

EA 10,878

1023AC Transit Case Only for Five (5) Hand Held Barcode Terminals HHT‐C), Full Keypad and 802.11g/i wireless communications

Intermec 655‐142‐001Rugged Aluminum Transit Case Only for 5 HHT‐C Handheld Terminals and Access Point

EA 612

1023AD Request for Nomenclature (DD Form 61), for 5 Hand Held Barcode Terminals (HHT‐C) Transit Case Configuration

EA




1023BA Transit Case Configuration, Stationary Bar Code Label Printer and AccessoriesIntermec 655‐143‐001 Rugged Aluminum Transit Case, includingIntermec PD42G: PD42GJ1100001020 Stationary Bar Code Label Printer w/USB Interface Cable to host computerIntermec 226‐000001‐200 AC Power Cord US Intermec 226‐000010‐100 Power Cord for Europe Intermec 226‐000011‐400 Power Cord for UK Intermec E22104 8‐inch roll of 4 by 6‐inch, plastic bar code label stockIntermec 13574106 Resin Printer RibbonIntermec 946‐002‐xxx CD Documentation AIT IVTraining for 0023AA Transit Case on CD

EA 1,352

1023BB Transit Case Only, Stationary Bar Code Label Printer and AccessoriesIntermec 655‐143‐001 Rugged Aluminum Transit Case

EA 600

1023BC Request for Nomenclature (DD Form 61), for Stationary Bar Code Printer Transit Case Configuration EA




1023CA Transit Case Configuration, Hand Held Barcode Terminal(HHT‐C) With Win Mobile 5.0, Full Keypad and 802.11g/i wireless communications, Includes Mini‐SD Card, 2GB (installed in HHT) and Stationary Bar Code Label Printer and AccessoriesIntermec 655‐144‐001 Rugged Aluminum Transit CaseIncluding:Intermec CN3eG: CN3FWH84000Z1G6Alpha,Aimg/SH,804,NoGPS,WM5 WWE

Intermec 825‐207‐001 CN3 Holster and Shoulder StrapIntermec 203‐839‐101 CN3 Series Scan Handle Intermec 318‐016‐102 CN3 Operational and Spare BatteryIntermec 714‐626‐001 Operational and Spare StylusIntermec 321‐576‐004 USB Interface CableIntermec 850‐818‐001 CAC ReaderIntermec 852‐065‐101 Multiple Battery Charger Intermec 871‐025‐002 CN3 Charger / Communications DockIntermec model 9004‐AE01 Universal Power Supply, qty 2

Intermec PD42G: PD42GJ1100001020 Stationary Bar Code Label Printer w/USB Interface Cable to host computer

Intermec 1‐974028‐025 AVG AC Power Cord, US, qty 3Intermec 1‐974027‐025 AVG AC Power Cord, Europe, qty 3Intermec 1‐974029‐020 AVG AC Power Cord, UK, qty 3Intermec E22104 8‐inch roll of 4 by 6‐inch, plastic bar code label stockIntermec 13574106 Resin Printer RibbonIntermec 935‐030‐001 CD Documentation AIT IVIntermec Training for 0023AA Transit Case on CD

EA 4,315




1023CB Transit Case Configuration, Hand Held Barcode Terminal(HHT‐C) With Win Mobile 5.0, Full Keypad and 802.11g/i wireless communications, Includes Mini‐SD Card, 2GB (installed in HHT) and Stationary Bar Code Label Printer and Accessories

Intermec 655‐144‐001Rugged Aluminum Transit CaseIncluding:

Intermec CN3eG: CN3FWH80000Z4G6Alpha,Aimg/SH,804,NoGPS,WM6 WWE

Intermec 714‐626‐001 Operational and Spare StylusIntermec 321‐576‐004 USB Interface CableModel AR6(850‐818‐xxx) CAC ReaderIntermec 074101‐001 CN3 Holster and Shoulder StrapIntermec 203‐839‐001 CN3 Series Scan handleIntermec 318‐016‐102 CN3 Extended Battery Pack / CN3 Operational and Spare BatteryIntermec 852‐065‐001 Multiple Battery Charger, 1 eachIntermec 851‐082‐103 or 851‐082‐003 Univ Power Supply Intermec 871‐025‐002 CN3 Charger / Communications DockIntermec 321‐576‐004 USB Interface CableIntermec model 9004‐AE01 Universal Power Supply

Intermec PD42BG0100000020Stationary Bar Code Label Printer w/ USB Interface Cable to host computer

Intermec 1‐974027‐025 AC Power Cord, Europe RoHS, qty 3Intermec 1‐974028‐025 AC Power Cord, US RoHS, qty 3Intermec 1‐974029‐020 AC Power Cord, UK RoHS, qty 3Intermec E22104 8‐inch roll of 4 by 6‐inch, plastic bar code label stock, 1 eachIntermec 13574106 Resin Printer Ribbon, 1 eachIntermec 935‐030‐001 CD Documentation AIT IVIntermec Training for 0023AA Transit Case on CD

EA 4,308

1023CC Transit Case Only, Hand Held Barcode Terminal (HHT‐C), Full Keypad and 802.11g/i wireless communications, and Accessories and Stationary Bar Code Label Printer

Intermec 655‐144‐001 Rugged Aluminum Transit Case

EA 632

1023CD Request for Nomenclature (DD Form 61), for Hand Held Bar Code Terminal (HHT‐C) and Stationary Printer Transit Case Configuration

EA




1023DA Transit Case Configuration, Small Arms Room KitIntermec 655‐145‐001– Rugged Aluminum Transit Case, including:Smarttrack Digital Arms Room SoftwareCognex Dataman 7500 DMR‐7500‐00 with USB Bar Code Imager for Direct Part Marks Dell E157FPT POS 15” LCD touch screen displayHP HP2015d Portable laser document printerItronix IX270‐01G Ruggedized Notebook Computer with Touch Screen MonitorBelkin CF‐VEBU06W Mini Port ReplicatorSCM 904622‐SCM CAC ReaderTopaz Systems Z‐T‐LBK462‐HSB Signature PadDatabook DBPRO‐80 1 back up hard driveAPC BK500 1 Uninterrupted Power supply (UPS)Packing lists for each caseInstallation Manual & hardware manuals for individual products

EA 39,615

1023DB Transit Case Configuration, Small Arms Room Kit ‐ Lot of 50 EA ConfigurationsIntermec 655‐145‐001– Rugged Aluminum Transit Case, including:Smarttrack Digital Arms Room SoftwareCognex Dataman 7500 DMR‐7500‐00 with USB Bar Code Imager for Direct Part Marks Dell E157FPT POS 15” LCD touch screen displayHP HP2015d Portable laser document printerItronix IX270‐01G Ruggedized Notebook Computer with Touch Screen MonitorBelkin CF‐VEBU06W Mini Port ReplicatorSCM 904622‐SCM CAC ReaderTopaz Systems Z‐T‐LBK462‐HSB Signature PadDatabook DBPRO‐80 1 back up hard driveAPC BK500 1 Uninterrupted Power supply (UPS)Packing lists for each caseInstallation Manual & hardware manuals for individual products

LT 1,686,257




1023DC Transit Case Configuration, Small Arms Room Kit ‐ Lot of 100 EA Configurations

Intermec 655‐145‐001– Rugged Aluminum Transit Case, including:Smarttrack Digital Arms Room Software

Cognex Dataman 7500 DMR‐7500‐00 with USB Bar Code Imager for Direct Part Marks Dell E157FPT POS 15” LCD touch screen displayHP HP2015d Portable laser document printerItronix IX270‐01G Ruggedized Notebook Computer with Touch Screen MonitorBelkin CF‐VEBU06W Mini Port ReplicatorSCM 904622‐SCM CAC ReaderTopaz Systems Z‐T‐LBK462‐HSB Signature PadDatabook DBPRO‐80 1 back up hard driveAPC BK500 1 Uninterrupted Power supply (UPS)Packing lists for each caseInstallation Manual & hardware manuals for individual products

LT 3,225,264

1023DD Transit Case Configuration, Small Arms Room Kit ‐ Lot of 250 EA Configurations



LT 7,695,035




1023DE Transit Case Configuration, Small Arms Room Kit ‐ Lot of 500 EA Configurations



LT 12,445,069

1023DF Transit Case Only, Small Arms Room KitIntermec 655‐145‐001 Rugged Aluminum Transit Case

EA 632

1023DG Request for Nomenclature (DD Form 61), for Small Arms Room Kit Transit Case Configuration EA

Software1031 Software Development Resource Kit (for Handheld Terminals)

Intermec SDK: 074925SW v2.4, for all HHT'sThe HHT SDK and documentation are provided via electronic download at no charge from http://www.intermec.com/products/devresourcekit/index.aspx

EA

1031AA Software Development Resource Kit (for Contact Memory Buttons)MacSema SDK: 592060 SW v4.1.0, for Contact Memory ButtonsIncludes Users Manual

EA N/C

1031BA Application Generation Software ‐ Graphic User Interface programming toolIncluded with CLIN 0031CB ‐ NSP

EA 426

1031CA Application Generation Software Server Runtime License (for PC Server)Mobileframe: S‐US‐BUS‐S‐45‐SPO

EA NSP

1031CB Application Generation Software Client Runtime License (for HHT)The per license cost decreases with the increased number of licenses purchased as noted here. Qty 1 $624, Qty 5 $561, Qty 50 $499, Qty 75 $436, Qty 100 $374, Qty 300 $311, Qty 500 $249 Each quantity level can be purcahsed with the CLINs 0031CC‐ 0031CJ that follow

ea 11,875




Application Generation Software Client Runtime License (for HHT) ‐ Lot of 1Mobileframe: S‐US‐CLT‐S‐45‐SPO Includes one (1) user license

EA 593

1031CC Application Generation Software Client Runtime License (for HHT) ‐ Lot of 5Mobileframe: S‐US‐CLT‐S‐45‐SPO‐5 Includes five (5) user licenses

EA 593

1031CD Application Generation Software Client Runtime License (for HHT) ‐ Lot of 50Mobileframe: S‐US‐CLT‐S‐45‐SPO‐50 Includes fifty (50) user licenses

EA 2,665

1031CE Application Generation Software Client Runtime License (for HHT) ‐ Lot of 75Mobileframe: S‐US‐CLT‐S‐45‐SPO‐75 Includes seventy‐five (75) user licenses

EA 23,703

1031CF Application Generation Software Client Runtime License (for HHT) ‐ Lot of 100Mobileframe: S‐US‐CLT‐S‐45‐SPO‐100 Includes one‐hundred (100) user licenses

EA 31,065

1031CG Application Generation Software Client Runtime License (for HHT) ‐ Lot of 300Mobileframe: S‐US‐CLT‐S‐45‐SPO‐300 Includes three‐hundred (300) user licenses

EA 35,530

1031CH Application Generation Software Client Runtime License (for HHT) ‐ Lot of 500Mobileframe: S‐US‐CLT‐S‐45‐SPO‐500 Includes five‐hundred (500) user licenses

EA 88,635

1031CJ Bar Code Label Design and Printing SoftwareSegull Scientific BarTender: BT‐A3 Label Design and Printing Software

EA 188,275

1031DA IUID Marking Integration SoftwareSavi I‐guides: UID‐BS IUID Marking Integration SoftwareIncludes five (5) User Licenses

EA 472

1031EA Wireless Network Management Software (Server)SOTI Wireless Network Management Software (Server)SOTISERVER Available for download at no charge from the Intermec AIT‐IV website

EA 30,752

1031FA Wireless Network Management Client Software (HHT)Intermec 474‐300‐501SOTI Wireless Network Management Client Software (HHT)

EA 11

1031FB FIPS 140 Wireless Security Software for Network (Server)Included with CLIN 0015CA ‐ NSP

EA 30

1031GA FIPS 140 Wireless Security Software for Client (HHT)Juniper OAC FIPS edition client SW ‐ This HHT client software requires use of the radio frequency gateway (CLIN 0015CA). The per license cost decreases with the increased number of licenses purchased as noted here. Qty 1 $66, Qty 5 $64, Qty 10 $62, Qty 25 $60, Qty 50 $58, Qty 100 $55, Qty 125 $55 Each quantity level can be purcahsed with the CLINs 0031GB‐ 0031GJ that follow

EA NSP

1031GB FIPS 140 Wireless Security Software for Client (HHT) ‐ Lot of 1Juniper: OAC‐ADD‐F1CLTOAC FIPS edition client SWIncludes one (1) user licenseThis HHT client software requires use of the radio frequency gateway (CLIN 0015CA)

EA 63




1031GC FIPS 140 Wireless Security Software for Client (HHT) ‐ Lot of 5Juniper: OAC‐ADD‐F5CLTOAC FIPS edition client SWIncludes five (5) user licensesThis HHT client software requires use of the radio frequency gateway (CLIN 0015CA)

EA 304

1031GD FIPS 140 Wireless Security Software for Client (HHT) ‐ Lot of 10Juniper: OAC‐ADD‐F10CLTOAC FIPS edition client SWIncludes ten (10) user licensesThis HHT client software requires use of the radio frequency gateway (CLIN 0015CA)

EA 589

1031GE FIPS 140 Wireless Security Software for Client (HHT) ‐ Lot of 25Juniper: OAC‐ADD‐F25CLTOAC FIPS edition client SWIncludes twenty‐five (25) user licensesThis HHT client software requires use of the radio frequency gateway (CLIN 0015CA)

EA 1,425

1031GF FIPS 140 Wireless Security Software for Client (HHT) ‐ Lot of 50Juniper: OAC‐ADD‐F50CLTOAC FIPS edition client SWIncludes fifty (50) user licensesThis HHT client software requires use of the radio frequency gateway (CLIN 0015CA)

EA 2,755

1031GG FIPS 140 Wireless Security Software for Client (HHT) ‐ Lot of 100Juniper: OAC‐ADD‐F100CLTOAC FIPS edition client SWIncludes one‐hundred (100) user licensesThis HHT client software requires use of the radio frequency gateway (CLIN 0015CA)

EA 5,225

1031GH FIPS 140 Wireless Security Software for Client (HHT) ‐ Lot of 125Juniper: OAC‐ADD‐F125CLTOAC FIPS edition client SWIncludes one‐hundred twenty‐five (125) user licensesThis HHT client software requires use of the radio frequency gateway (CLIN 0015CA)

EA 6,531

Small Arms Room Management SoftwareWilliams Software SmartTrack ‐ The per license cost decreases with the increased number of licenses purchased as noted here. Each quantity level can be purcahsed with the CLINs 0031HA‐ 0031HF that follow: qty 1 $30,431, qty 2 $29,816, qty 50 $28,280, qty 100 $27,050, qty 250 $24,591, qty 500 $23,054

1031HA Small Arms Room Management Software ‐ Lot of 1Williams Software: SmartTrack‐1Includes one (1) user license

EA 26,875




1031HB Small Arms Room Management Software ‐ Lot of 2Williams Software: SmartTrack‐49Includes two (2) user license2

EA 53,750

1031HC Small Arms Room Management Software ‐ Lot of 50Williams Software: SmartTrack‐99Includes fifty (50) user licenses

EA 1,093,750

1031HD Small Arms Room Management Software ‐ Lot of 100Williams Software: SmartTrack‐249Includes one‐hundred (100) user licenses

EA 2,062,500

1031HE Small Arms Room Management Software ‐ Lot of 250Williams Software: SmartTrack‐499Includes two‐hundred‐fifty (250) user licenses

EA 4,843,750

1031HF Small Arms Room Management Software ‐ Lot of 500Williams Software: SmartTrack‐500Includes five‐hundred (500) user licenses

EA 7,187,500

1031JA Manufacturing and Warehouse Management SoftwareAIT Warehouse Management (Single Server) SoftwareHL Group: 235‐192‐001, SW v2.0AIT Manufacturing Execution (Single Server) SoftwareHL Group: 235‐187‐001, SW v2.0

EA 289,600

1031KA CAC Enablement SoftwareTecSec CAC Reader Middleware V1.0 Go to http://intermec.com/AIT/‐clcick on Support, downloads, and then select handheld Barcode Terminals HHT that corresponds to the unit from the drop down. All downloads available for the HHT will be displayed. Select CAC Middleware SDK (Software Development Kit)

EA nsp

0081 CAC Enablement SoftwareTecSec CAC Reader Middleware V1.0

EA



Central Order Processing Offices

Chad SimsPD-AMISCOM: 703-325-1890FAX: [email protected]

Eddie Chase, AFMC 403 SCMS/GUEA, WPAFB Comm 937-656-9210. [email protected]

Lorrey BentzelNAVSUP N65Navy AIT Program Manager(717) 605-6724 DSN [email protected]

Mr. Tony Brill, Team Lead, USMC AIT, MARCORSYSCXOM, IS&I, Comm: (703) 432-5123, Fax: (703) 432-3352, Email: [email protected]

COPO currently not assigned. Contact US Army COPO POCs.

Ordering Guidelines SummaryFind the complete ordering instructions at the AIT Ordering Guide at http://home.intermec.com/AIT/

These offices perform a specific function regarding the processing of orders issued under the AIT‐IV contract. Orders must be processed by the appropriate COPO before being processed by the Contractor. Following review, the COPO will assign a UCN number, which is required to process all delivery and task orders.

The delivery orders are issued by any warranted Contracting Officer or other authorized credit card holder in the Department of Defense, Coast Guard, and other Federal agencies. PM J‐AIT is assigned as the COPO for the U.S. Coast Guard and other Federal agencies to receive and review all delivery orders from their respective service agency and, after reviewing and approving the order, forwards the order to Intermec.

U.S. Army, U.S. Coast Guard, and Other Federal Agencies

U.S. Air Force, AFMC-lso/loa

U.S. Marine Corps, Marine Corps Systems Command

U.S. NAVY, Naval Supply Systems Command

Defense Logistic Agency (DLA)



Completing an SF1449 Order

Block Title Description

1 Requisition Number Enter assigned requisition number.2 Contract Number The contract number is: W91QUZ‐09‐D‐0044

3 Effective Date

This is the effective date of the order. In selecting the effective date, the contracting officer must consider the time required for COPO review, etc. to ensure the order is “mailed” to the contractor on/not later than the effective date of the order (FAR 11.403).Enter the locally assigned number.Note: Only ITEC4 may use numbers 0001 – 9999.

9 Issued By

Your contracting office name, address, and the name and commercial telephone number of the individual who prepared the order and can answer questions regarding it. The code to be included in this block is the six‐digit DODACC for your activity.

11 Destination Indicates the delivery destination.12 Discount Terms Leave blank.13a DPAS Rated Block 13a is checked (X) if an order has been assigned a rating.13b Rating If a rating is required for the order, enter DO/A7 in Block 13.

This block must contain the name and commercial phone number of a single POC for the entire order; as well as the delivery address, DoDAAC, and email address. If an order includes multiple Ship To addresses, a POC for each of these locations must be provided in addition to a POC for the entire order. “See Schedule” may be entered in Block 15 and ship to information listed on the “Continuation Sheet” of the SF 1449.

Note: Orders received without this information cannot be accepted.CODE: S4801ADCMA SEATTLE188 106TH AVE NESuite 660BELLEVUE, WA 98004

Order Number

15 Deliver To

16 Administered By

4

Form SF 1449 is used to purchase commercial items when simplified acquisition procedures are used. An SF 1449 form is issued for each order to ship and receive products. The required blocks must be completed in order for the request to be filled. Standard Form 30 should be used to modify the order. The required fields to complete form SF 1449 are as follows:



Must list the contractor’s address as follows:Intermec Technologies CorporationShannon Landis (Code: 33825)6001 36th Avenue WestEverett, WA 98203‐9280Must list the Payment Office as follows:All orders purchased with DoD funds:CODE: HQ0339DFAS – Columbus CenterWest Entitlement OperationsP.O. Box 182381Columbus, OH 43218‐2381All orders purchased with Non‐DoD funds must list the appropriate Payment Office annotated on the individual order.

The line item taken from contract. This block contains the appropriate Contract Line Item Number (CLIN) and/or Subcontract Line Item Number (SLIN) from the Schedule of Supplies/Services on the AIT‐IV contract. Only assigned CLINs may be used to order items and services from this contract.

Note: Do not use any other numbers in this block. DFAS needs the CLIN/SLIN numbers to be reflected on the SF 1449 in order to do initial entry of orders into their automated payment system. When the Contractor submits a request for payment, DFAS will compare the request for payment of CLIN/SLINs with the order CLIN/SLINs. Use of item numbers in Block 19 on the SF 1449 and not CLIN/SLIN numbers will result in payment delays and excessive administrative costs to both the Contractor and the Government.

20Schedule of Supplies/ Services (includes Continuation Sheet)

Information to be entered to include: UCN, description of supplies and services and delivery schedule.

21 Quantity Quantity ordered.22 Unit Unit of measure.23 Unit Price Unit price.24 Amount The dollar amount ordered.

25 Accounting and Appropriation DataEnter the accounting and appropriation line to be charged. For DoD orders, enter the Accounting Classification Reference Number (ACRN).

26 Total Award Amount The total award amount.31a Signature32a Received and Accepted

19 Item Number

17a

18a

Contractor

Payment Will be Made By



32b Government Signature32c Date33 Ship Number42a Signature42c Date


ordering guidelines summary - honeywell...

Documents