Orbi Wall-Mounting KitQuick Start Guide

Model RBKWM

Install the wall mount with the cradle for smaller Orbi products

You can adjust the cradle to fit smaller Orbi products.

You must prepare the wall mount before following these instructions. For more information, see Prepare the wall mount on the other side of this quick start guide.

Note: These instructions show the Orbi Tri‑band WiFi System (model RBK20).

Install the wall mount with the cradle

You must prepare the wall mount before following these instructions. For more information, see Prepare the wall mount on the other side of this quick start guide.

If you need to use the cradle but your Orbi product is too small for the cradle, see Install the wall mount with the cradle for smaller Orbi products.

Note: These instructions show the Orbi AC3000 Tri‑band WiFi System (model RBK50).

1

2

3

1

2

3

44 5

5

Package contents Prepare the wall mount

Wall-mount bracket

Wall-mount cover

Note: The bracket and cover come preattached.

Cradle

Screws (2)Wall anchors with (2)

Install the wall mount without the cradle

Use this method to install Orbi models with mounting holes on the bottom.

Note: These instructions show the Orbi WiFi 6 System AX6000 (model RBK852).

Support and Community

Visit netgear.com/support to get your questions answered and access the latest downloads.

You can also check out our NETGEAR Community for helpful advice at community.netgear.com.

© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only.

NETGEAR INTERNATIONAL LTD Floor 1, Building 3, University Technology Centre Curraheen Road, Cork, T12EF21, Ireland

NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA

1

2

1 2

3

IMPORTANT: You can only install the wall mount vertically on a wall. Do not install the wall mount horizontally or on the ceiling.

March 2020

4

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à https://www.netgear.com/support/download/.

(If this product is sold in Canada, you can access this document in Canadian French at https://www.netgear.com/support/download/.)

For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy‑policy.

By using this device, you are agreeing to NETGEAR’s Terms and Conditions at https://www.netgear.com/about/terms‑and‑conditions. If you do not agree, return the device to your place of purchase within your return period.

Regulatory and Legal

For more information about this setup, see Install the wall mount without the cradle.

Determine if your wall mount needs the cradle

If your Orbi model has mounting holes on the bottom, you can install the wall mount without the cradle.

For more information about this setup, see one of the following sections on the other side of this quick start guide:

• Install the wall mount with the cradle

• Install the wall mount with the cradle for smaller Orbi products

Wall mount without the cradle

Wall mount with the cradle

Mounting holes

https://www.netgear.com/supporthttps://community.netgear.comhttps://www.netgear.com/support/download/https://www.netgear.com/support/download/https://www.netgear.com/about/regulatoryhttps://www.netgear.com/about/privacy-policy/https://www.netgear.com/about/terms-and-conditions/https://www.netgear.com/about/terms-and-conditions/