OR-PR 156

Fabricate a Standard Full Calf Cuff

Fabricate a Standard Full Calf Cuff Cut a strip of leather 2 1/2” wide and the

length of the largest calf circumference + 2 1/2”

Largest Calf Circumference + 2 1/2”

2 1/2”

Fabricate a Standard Full Calf Cuff

Cut out pearl/cream cow strip as long as cuff and about 2” wider

Make sure that stretch runs along length

Cuff width + 2”

Cuff length

STRETCH

Fabricate a Standard Full Calf Cuff

Glue back of cuff as well as cowhide

Fabricate a Standard Full Calf Cuff

Stretch cowhide lengthwise

Fabricate a Standard Full Calf Cuff Turn leather strip over, center, and adhere to

cowhide strip

Fabricate a Standard Full Calf Cuff Measure in 2 1/2 “ from each end and mark top

& bottom edges of cuff Cut cowhide at 45° angles as shown Glue edges of leather strip within cut lines

2 ½” 2 ½”

Fabricate a Standard Full Calf Cuff Fold and glue down cowhide over edges of cuff Sew around perimeter of cuff, 3/16” from edges

Fabricate a Standard Full Calf Cuff Trim away cowhide around perimeter of cuff Trim folded-over cowhide 1/8” from stitching Miter corners of cuff slightly

Fabricate a Standard Full Calf Cuff Your cuff is now ready to attach to the calf band