optimal solutions - essentra components · where ˜ bre breakout is required, ... 436˚439 440˚446...

Protect vulnerable optical � bres, particularly where � bre breakout is required, and you'll avoid costly signal failure and data errors.

Essentra o� ers an extensive range of � bre optic products, meeting telecom and datacom application requirements at all levels. Our products help eliminate potential hazards such as macro and micro bends caused by mishandling of optical � bres during installation, maintenance and upgrade.

OPTIMAL SOLUTIONS

www.essentracomponents.�

436-439

440-446

449-455

456

459-463

457-458

435

OPTIMAL SOLUTIONS

FIBRE MANAGEMENT

Splice Trays and Supports

Fibre Clips and Supports

Fibre Reels and Guides

Fibre Bend Limiting Tubing and Accessories

Fibre Breakout and Manifolds

Fibre Strain Relief, Blanking Plugs and Caps

436

SPLICE TRAYS AND SUPPORTSSPLICE TRAYS AND SUPPORTSSPLICE TRAYS AND SUPPORTSSPLICE TRAYS AND SUPPORTSSPLICE TRAYS AND SUPPORTS

Type 4

Type 1

Type 2

Type 3

Optical Fibre Splice Tray SystemOFST

• Lid, trays, and hinges all sold separately or in a kit: OFST-A-P-1

• Inter-tray fiber routing possible through slots along one of the long sides

• OFSTH color coded hinges indicate side of tray to open from

• Can be used with OFSH splice holders, OFSP splice protectors and OFBLT bend limiting tubing

Part Number Type Description Material Color Std Pack Qty

OFST-1-L 1 OF Splice Tray Lid PPE + PS Blend, RMS-105 Black 20

OFST-1-M 2 OF Splice Tray Managed with Radius Control & Dark Fiber StorageGlass-Filled UL94 V0 Nylon 6/6, RMS-18A

Black 20

OFST-1-P 3 OF Splice Tray Plain with Basic Storage FacilityGlass-Filled UL94 V0 Nylon 6/6, RMS-18A

Black 20

OFSTH-1-RED 4 OF Splice Tray HingePP, RMS-150 & TPE, RMS-182

Red 20

OFSTH-1-GRN 4 OF Splice Tray HingePP, RMS-150 & TPE, RMS-182

Green 20

OFST-A-P-1 -Splice Tray Kit Includes: 1 x OFST-1-L,

1 x OFST-1-P, 2 x OFSTH-1-RED, 2 x OFSTH-1-GRN See above See above 10

DARK FIBRE STORAGE

TYP

TYP

TYP

TYP

TYP

TYP

TYP

TYP

tel | +358 9 2522 1500 fax | +358 9 2522 1540

437

Splice HolderOFSH-T

Black

• OFSH-T-6 designed to hold up to 6 x 3mm Fibre or components, i.e. couplers, splice protectors (OFSP on page 439), and WDM’s

• OFSH-T-12 designed to hold up to 12 crimp splice protectors

• OFSH-T Splice Holders can be used with OFST Series Splice Trays

OFSH-T-6 OFSH-T-12

Part Number Contents Std Pack QtyOFSH-6-3.5 No Adhesive 10

OFSH-6-3.5A With Adhesive, RMS-400 10OFSH-6-3.5L Lid Only 10

Part NumberStd Pack

QtyUL94 V2 Nylon 6/6, RMS-01

UL94 V0 Nylon 6/6, RMS-19

25% Glass-Filled UL94 V0 Nylon 6/6, RMS-104

OFSH-T-6-01BLK OFSH-T-6-19BLK OFSH-T-6-GFBLK 100OFSH-T-12-01BLK OFSH-T-12-19BLK - 100

OFSH–6–3.5L OPTIONAL LID SOLD SEPARATELY

OPTIONAL ADHESIVE PAD

4 FEET X Ø 5

REF

REF

Optical Fibre Splice HolderOFSH-6

Natural PP, RMS-150 and TPE, RMS-182


email | [email protected] web | www.essentracomponents.fi

438

Splice TrayEFA04-25-001

Black UL94 V0 Nylon 6, RMS-390

• Moulded-in features maintain bend radius at 30mm

• Accepts Isolator Clips EFA04 61, 63 and 64 001 (shown below) for holding splicing components

• Accepts 16-way Fibre Clip EFA04 06 and 08 001 broken into a 4-way segment for holding splicing components

Part Number Std Pack QtyEFA04-25-001 50

8 x Ø 2.8mm on 30mm PCD

24-Way Splice HolderOFSH2

Black UL94 V0 Nylon 6/6, RMS-19

Type 1 Type 2

Part Number Type Mounting Method Splice Protector Size After Heat Shrink Std Pack QtyOFSH2-24-1 1 0.8mm Thick adhesive pad, RMS-375 Up to 1.6 50OFSH2-24-2 1 No Adhesive Up to 1.6 50OFSH2-24-3 2 M3 OR #4 Screw Up to 1.6 50

REF

REF

REF


tel | +358 9 2522 1500 fax | +358 9 2522 1540

439

Type 2

Type 1 Part Number TypeDimensions (mm)

Std Pack Qty“A” Nominal Sleeve

Length Ref.“B” Inner

Tube Ø“C” Nominal

Rod Ø“D” Recovered

Ø Ref.OFSP-10-25 1 25 1.5 1 2.4 100OFSP-10-30 1 30 1.5 1 2.4 100OFSP-10-35 1 35 1.5 1 2.4 100OFSP-10-40 1 40 1.5 1 2.4 100OFSP-10-45 1 45 1.5 1 2.4 100OFSP-10-61 1 61 1.5 1 2.4 100OFSP-15-40 1 40 1.5 1.5 2.8 100OFSP-15-61 1 61 1.5 1.5 2.8 100OFSP-08-25 1 25 0.5 0.8 1.6 100OFSP-08-40 1 40 0.5 0.8 1.6 100

ROFSP-40-40 2 40 3.6 X 1 4 X 1.8 5 X 3 100

Part Number Each Bag Supplied With: Std Pack QtyOFFM 10 Manifolds, No Tubing 10

OFFM-1-12

10 Manifolds120M coil PTFE-1-120-NAT

10 x 30mm long silicone tube10 x 15mm long silicone tube

10 pieces PE foam adhesive tape

10

2 HOLES Ø3

STAINLESS STEEL ROD

CERAMIC ROD

INNER TUBE

INNER TUBE

OUTER TUBE

OUTER TUBE

Optical Fibre & Ribbon Fibre Splice ProtectorOFSP/ROFSP

Outer Tube - Heatshrink 3:1 Ratio Polyolefin, RMS-225

Inner Tube - Clear PE Copolymer Adhesive, RMS-226

Rod - OFSP - SS, RMS-227

ROFSP - Ceramic, RMS-170

Optical Fibre Flat ManifoldOFFM

Natural PTFE UL94 V0, RMS-291

Grey Glass-filled UL94 V0 PBT, RMS-290

• Maximum of 12 fibres

• A range of flanged termination crimp kits (OFTK Series) are available to give a strong, mechanical anchorage for common size element/blown fibre tubing and OFBLT

• The Optical Fibre Flat Manifold has the ability to breakout and protect primary fibre from cable element tubing, ribbon fibre or a blown fibre unit. The input fibre tube is secured by a clamping system moulded into the product. Each output fibre is protected in a 900 µm PTFE tube, also secured by a moulded detail

Product Number Material Std Pack QtyPTFE-1-120-NAT Natural PTFE UL94 V0, RMS-291 120m

miniflex

Part Number Std Pack QtyOFEB-3-19 1000

0.8 THICK, DOUBLE SIDED ADHESIVE TAPE

6 x Ø3 TYP.

Optical Fibre Expandable BracketOFEB

Natural UL94 V-0 Nylon 6/6, RMS-19

Adhesive backing, RMS-15



440






FIBRE CLIPS AND SUPPORTSFIBRE CLIPS AND SUPPORTSFIBRE CLIPS AND SUPPORTSFIBRE CLIPS AND SUPPORTSFIBRE CLIPS AND SUPPORTS

Coupler ClipEFA04-18/EFA04-71

Black UL94 V0 Nylon 6, RMS-390; Adhesive RMS-143

• EFA04 18 can be broken apart to form individual clips

EFA04 18

EFA04 71 X03Ø3.9 Coupler Clip



Part Number Contents Std Pack QtyEFA04-18-001 4-way 3.9mm, 6-way 3.4mm, 6-way 2.9mm coupler clips 100EFA04-18-ASS EFA04 18 001 with 8 adhesive pads 100EFA04-71-001 6-way 2.9mm coupler clip 100EFA04-71-P01 EFA04 71 001 with 3 adhesive pads 100EFA04-71-002 6-way 3.4mm coupler clip 100EFA04-71-P02 EFA04 71 002 with 3 adhesive pads 100EFA04-71-003 4-way 3.9mm coupler clip 100EFA04-71-P03 EFA04 71 003 with 2 adhesive pads 100


tel | +358 9 2522 1500 fax | +358 9 2522 1540

441



Isolator ClipsEFA04-6X

UL94 V0 Nylon 6, RMS-390; Adhesive, RMS-143

• Designed for use in the Array Tray EFA04-25-001 (shown above)

• Can be screw or rivet mounted or mounted with self adhesive pads, please see Section C

• EFA04 61 001 has anti-rotation pins to securely mount when using screw or rivet

Type 1 Type 2

Part Number

Type Contents ColorDimensions (mm) Std

Pack Qty“A” “B”EFA04-61-001 1 6MM Isolator Clip Red 6.9 5.3 100EFA04-61-ASS 1 6MM Isolator Clip with Adhesive Pad Red 6.9 5.3 100EFA04-63-001 2 5.5MM Isolator Clip Green 7.5 4.9 100EFA04-63-ASS 2 5.5MM Isolator Clip with Adhesive Pad Green 7.5 4.9 100EFA04-64-001 2 4.5MM Isolator Clip Yellow 8.5 5.3 100EFA04-64-ASS 2 4.5MM Isolator Clip with Adhesive Pad Yellow 8.5 5.3 100

442


tel | +358 9 2522 1500 fax | +358 9 2522 1540

16-Way Fibre ClipsEFA04-06/EFA04-08

UL94 V0 Nylon 6, RMS-390; Adhesive RMS-143

• Can be broken apart to form 3 individual clips holding 4, 4 and 8 components

• A broken apart 4-way can be used in the Splice Tray EFA04 25 001

Optical Fibre Splice HolderOFSH-4

Natural

• Holds 12 x 2.7mm or 4 x 4.2mm splices

• Fastens with either a self-adhesive pad RMS-270, provided, or via a screw or rivet

Part Number Contents Color “A” (mm) Std Pack QtyEFA04-06-001 16-way 3mm fibre clip Black 4.8 100EFA04-06-ASS 16-way 3mm fibre clip with adhesive pad Black 4.8 100EFA04-08-001 16-way 2mm fibre clip Blue 6.4 100EFA04-08-ASS 16-way 2mm fibre clip with adhesive pad Blue 6.4 100

Part Number Material Std Pack QtyOFSH-4-1-01LA UL94 V-2 Nylon 6/6, RMS-01 50OFSH-4-1-19LA UL94 V-0 Nylon 6/6, RMS-19 50


443



Fibre ClipEFA-04-02-ASS


• Designed to hold 3mm diameter fibre or components, i.e. couplers, splice protectors, and WDM’s

Part Number Contents Std Pack QtyEFA-04-02-ASS 3mm fibre clip with adhesive, RMS-143 100

ADHESIVE PAD

OFBLT Mounting SaddleOFTGSP

Natural UL94 V0 Nylon 6/6, RMS-19

Type 1

Type 1 Mounting Hole Detail Type 2 Mounting Hole Detail

Type 2

Part Number Type Hole Ø Panel Thickness Max. Std Pack QtyOFTGSP-1-05-19 1 6.35 ± 0.08 2.4 100OFTGSP-2-05-19 2 5 ± 0.08 1.8 100

444

Part NumberStd Pack QtyNatural Nylon

6/6, RMS-01Natural UL94 V0 Nylon,

6/6RMS-19MOFNSB-2-01A-RT MOFNSB-2-19A-RT 1000

Mini Optical Fibre Network Saddle on Adhesive BaseMOFNSB

Adhesive Back: RMS-15

TYPICAL RELEASE TAB LOCATION DOUBLE SIDED

ADHESIVE TAPE

BASE THICKNESS2.18

Part Number Std Pack QtyOFSMB-4-05GFBK 10


tel | +358 9 2522 1500 fax | +358 9 2522 1540

Optical Fibre Slotted Multi BracketOFSMB

Black Glass-Filled UL94 V0 Nylon, RMS-104

• Miniflex technology manufactured by Richco - patented

• Optical Fibre Slotted Multi-Brackets are for use at distribution points where orderly fibre management, protection and strain relief are required

• An additional security feature allows fitting of a cable tie around OFSMB’s which prevents removal of any retained tubes

• OFBLT retention: >70N

• Holds a maximum of 12 tubes

TYP. 10

TYP.Ø8.5

TYP.Ø5

445

Optical Fibre Holder on Base, 2mmOFHB2

Natural Nylon 6/6, RMS-19

Product Number Std Pack QtyOFHB3-4-19A-RT 1000

Part Number Std Pack QtyOFHB2-4A1-RT-19 1000

DOUBLE SIDED ADHESIVE TAPE

4 x Ø 3 CABLES

TYPICAL RELEASE TAB LOCATION

5.1 TYP.

4 x Ø 2 TYP. TYPICAL RELEASE TAB LOCATION

.8 THICK DOUBLE SIDED ADHESIVE, RMS-102

Optical Fibre Holder on Base, 3mmOFHB3


Adhesive Backing, RMS-15



446


tel | +358 9 2522 1500 fax | +358 9 2522 1540

Part Number Type Hole Ø Panel Thickness Std Pack QtyOFB-BH-6-19 1 7.92 ± 0.05 6.35 Min. 1000OFB-BH-9-19 2 7.92 ± 0.05 6.35 Min. 1000

CABLES

CABLES

Type 1

Type 2

REF

REF

REF

REF

Optical Fibre Bracket, Blind HoleOFB-BH


Part Number Std Pack QtyOFB3P-4-19 1000

RECOMMENDED MOUNTING HOLES IN 1.6 MAX.

THICK PANEL

Optical Fibre Bracket, 3mm, Plug-In, 4 SlotOFB3P


• Anti-rotation pin prevents fibre kinking due to bracket turning in the mounting hole

9.1

REF 25 REF


New

HERE ARE JUST A FEW OF OUR NEW PRODUCTS!

OVER 35,000 PRODUCTS VISIT OUR WEBSITE TODAY!

Motion Control

Pages 664-685

Handles and KnobsPages 686-753

LocksPages 494-541

MagnetsPages 984-987

SpringsPages 464-491

HingesPages 567-617

Cable Management

Pages 328-391

Circuit Board HardwarePages 154-219

General ProtectionPages 20-153

Security Seals

Pages 886-100

448 TEL: +358 9 2522 1500 FAX: +358 9 2522 1540www.essentracomponents.�

WE MAKE IT EASYOver 35,000 products in stock - it's easy to find what you need!

It's easy to order - simply call us or order online

Fast delivery from 1 billion parts in stock - it's easy!

SAME DAY DISPATCH

MORE CHOICE

FREE SAMPLES

449 email | [email protected] web | www.essentracomponents.fi

FIBRE REELS AND GUIDESFIBRE REELS AND GUIDESFIBRE REELS AND GUIDESFIBRE REELS AND GUIDESFIBRE REELS AND GUIDES

Optical Fibre Coiling ClipOFCC/OFCG

Black Rigid PVC, RMS-04; Adhesive, RMS-15

• Two extruded clips snap into each other to form a clip with a smooth, curved surface to accommodate fibre optic bundles

Type 1 Type 2

Chain PlateOFCP

Natural UL94 V0 Nylon 6/6; RMS-19

• Complete the circle for an excess fibre spool to form a “Y” for breakout points

Optical Fibre Support BaseOFSB

• Designed for use in fibre optic patch panel applications

Part Number Std Pack QtyOFCP-50-19 500

Part Number Type Std Pack QtyOFCC-16A-RT 1 100

OFCG-16 2 100

0.8 THICK, DOUBLE SIDED ADHESIVE TAPE

DOUBLE SIDED ADHESIVE TAPE

1.6 THICK

R40.6 MIN..

1.5 TYP. WALL THICK

26 DIA.

4.8 DIA.

R43.2

4.75 DIA.

Mounting RivetsPart Number Hole Ø Panel Thickness Range

SR-5045 5.1 - 5.2 1.5 - 2.5SR-5055 5.1 - 5.2 2.5 - 3.5SR-5065 5.1 - 5.2 3.5 - 4.5SR-5075 5.1 - 5.2 4.5 - 5.5SR-5085 5.1 - 5.2 5.5 - 6.5SR-5095 5.1 - 5.2 6.5 - 7.5SR-5105 5.1 - 5.2 7.5 - 8.5

Part NumberMounting Method Std Pack QtyNatural UL94 V2

Nylon 6/6, RMS-01Natural UL94 V0

Nylon 6/6, RMS-19OFSB-4-85-01A OFSB-4-85-19A Adhesive tape, RMS-15 100OFSB-4-85-01 OFSB-4-85-19 Screw or Rivet Mount 100

• All connections maintain a bend radius greater than 30mm

450


tel | +358 9 2522 1500 fax | +358 9 2522 1540

Fibre ReelsEFA04

UL94 V0 Nylon 6, RMS-390; Adhesive: RMS-143

• Board mountable using standoff EFA04 27 ASS

• Stackable using Stacking Pillar EFA04 53 ASS

• Type 1 can be broken apart into 4x90° bending control devices

Part Number Type Contents “C” (mm) Max. Fibre Storage Std Pack QtyEFA04-04-001 1 25 mm radius fibre reel 4 2.5m of 900 micron fibre 100EFA04-04-ASS 1 EFA04-04-001 with 4 self-adhesive pads 4 2.5m of 900 micron fibre 100EFA04-21-001 1 25 mm radius fibre reel 6.35 4.5m of 900 micron fibre 100EFA04-21-ASS 1 EFA04-21-001 with 4 self-adhesive pads 6.35 4.5m of 900 micron fibre 100EFA04-10-001 2 30mm radius fibre reel 3.9 3m of 900 micron fibre 100EFA04-10-ASS 2 EFA04-10-001 with 4 self-adhesive pads 3.9 3m of 900 micron fibre 100EFA04-14-001 2 30mm radius fibre reel 12.4 9m of 900 micron fibre 100EFA04-14-ASS 2 EFA04-14-001 with 4 self-adhesive pads 12.4 9m of 900 micron fibre 100EFA04-76-001 2 35mm radius fibre reel 8 15m of 900 micron fibre 100EFA04-76-ASS 2 EFA04-76-001 with 4 self-adhesive pads 8 15m of 900 micron fibre 100EFA04-23-001 3 40mm radius fibre reel 6.35 7m of 900 micron fibre 100EFA04-23-ASS 3 EFA04-23-001 with 4 self-adhesive pads 6.35 7m of 900 micron fibre 100

Type 1

8 Holes, Ø2.8 C/SKØ4.6 with 0.5mm

parallel 90° Incl. on30mm PCD

Type 2

8 Holes Ø2.8,C/SK Ø4.6 with 0.5

parallel 90° Incl. on30mm PCD

Type 3

4 Holes Ø2.8,C/SK Ø4.6 with

0.5 parallel 90° Incl. on 30mm PCD

4 Holes Ø4 thruon a 15mm PCD

451



Fibre Reel Mounting PillarEFA04-53-ASS


• Pillar is rivet mounted from the bottom of the board with SRHR-3555 rivet

• Reels are retained using the included spring retaining clip

Fibre Reel StandoffEFA04-27-ASS


• Standoff is rivet mounted from the bottom of the board with SRHR-3555 rivet

• Reel snaps onto the top of the standoff, holding it in place

SPRING RETAINING CLIP INCLUDED

Fibre Winding ReelEFA04-67-ASS


Part Number Std Pack QtyEFA04-53-ASS 100



• Wound fibre is taped to maintain bend radius and provide identification (tape not supplied)

• Two-part reel is then disassembled for easy fibre removal

• Stores up to 8m of 900 micron fibre at a 30mm radius

• Reusable

452


tel | +358 9 2522 1500 fax | +358 9 2522 1540

Corner GuideEFA04-34


• Maintains bending radius through a 90° turn

Type 1

Type 2

Type 3

Type 4

Part Number Type Contents “A” Height Std Pack QtyEFA04-34-002 1 35mm Radius Corner Guide 4.8 100EFA04-34-P02 1 Guide with Self-Adhesive Pad 4.8 100EFA04-34-R02 1 Guide with SRHR-3555 Rivets 4.8 100EFA04-34-PR2 1 Guide with Pad and Rivets 4.8 100EFA04-34-005 1 35mm Radius Corner Guide 12 100EFA04-34-P05 1 Guide with Self-Adhesive Pad 12 100EFA04-34-R05 1 Guide with SRHR-3555 Rivets 12 100EFA04-34-PR5 1 Guide with Pad and Rivets 12 100EFA04-34-001 2 30mm Radius Corner Guide 5 100EFA04-34-P01 2 Guide with Self-Adhesive Pad 5 100EFA04-34-R01 2 Guide with SRHR-3555 Rivets 5 100EFA04-34-PR1 2 Guide with Pad and Rivets 5 100EFA04-34-010 2 30mm Radius Corner Guide 8 100EFA04-34-P10 2 Guide with Self-Adhesive Pad 8 100EFA04-34-R10 2 Guide with SRHR-3555 Rivets 8 100EFA04-34-PR0 2 Guide with Pad and Rivets 8 100EFA04-34-004 2 30mm Radius Corner Guide 12 100EFA04-34-P04 2 Guide with Self-Adhesive Pad 12 100EFA04-34-R04 2 Guide with SRHR-3555 Rivets 12 100EFA04-34-PR4 2 Guide with Pad and Rivets 12 100EFA04-34-003 3 40mm Radius Corner Guide 4.8 100EFA04-34-P03 3 Guide with Self-Adhesive Pad 4.8 100EFA04-34-R03 3 Guide with SRHR-3555 Rivets 4.8 100EFA04-34-PR3 3 Guide with Pad and Rivets 4.8 100EFA04-34-006 3 40mm Radius Corner Guide 12 100EFA04-34-P06 3 Guide with Self-Adhesive Pad 12 100EFA04-34-R06 3 Guide with SRHR-3555 Rivets 12 100EFA04-34-PR6 3 Guide with Pad and Rivets 12 100EFA04-34-007 4 Ribbon Fiber Guide 5.5 100EFA04-34-P07 4 Guide with Self-Adhesive Pad 5.5 100EFA04-34-R07 4 Guide with SRHR-3555 Rivets 5.5 100EFA04-34-PR7 4 Guide with Pad and Rivets 5.5 100

453



Straight GuideEFA04 60


Part Number Contents Std Pack QtyEFA04-60-001 Guide 100EFA04-60-P01 Guide with Self-Adhesive Pad 100EFA04-60-R01 Guide with SRHR-3555 Rivets 100EFA04-60-PR1 Guide with Pad and Rivets 100

Optical Flexible Fibre Guide SystemOFFG/OFFGSP


OFFGSP-F OFFGSP-R

Patented

OFFG-165M-19-BK

Part Number OFFG Mounting Type Standoff Height “A” Std Pack QtyOFFGSP-F-19-BK Flat Support Post - 100OFFGSP-R-05-BK Standoff Support Post 5 100OFFGSP-R-10-BK Standoff Support Post 10 100OFFGSP-R-16-BK Standoff Support Post 16 100

OFFG-165M-19-BK - - 100

CREATES 25.0 BEND LIMITING FEATUREWHEN CHANNEL IS FLEXED INTO POSITION

GUIDE CAN BE CUT TO VARIOUS LENGTHSAT FLEXIBLE LINK SECTIONS

TO SNAP-LOCK INTO A2.5±0.05 HOLE, IN A 1.6BOARD THICKNESS

TO SNAP-LOCK INTO A2.5±0.05 HOLE, IN A 1.6BOARD THICKNESS

TYP.TYP. TYP.

TYP.

TYP.

TYP.

• For use with 250 and 900 micron fibre

• Fibre can enter and exit at any point, without risk of fibre snagging or kinking

454


tel | +358 9 2522 1500 fax | +358 9 2522 1540

Optical Fibre Network SaddleOFNS

Type 1 Type 2 Type 3

Type 4 Type 5 Type 6

SEE FIGURE

Part NumberType

Dimensions (mm)Mounting

HolePanel

ThicknessStd

Pack QtyNatural UL94 V2 Nylon 6/6, RMS-01



A B C D

OFNS-16-187-01 OFNS-16-187-01B OFNS-16-187-19 1 34.3 28.7 25.1 34.4 Ø 4.75 0.8 - 2 1000OFNS-13-187-01 OFNS-13-187-01B OFNS-13-187-19 1 26.8 21.2 19 28.2 Ø 4.75 0.8 - 2 1000OFNS-16-312-01 OFNS-16-312-01B OFNS-16-312-19 2 34.3 28.7 25.1 34.4 Ø 7.92 0.8 - 1.6 1000OFNS-13-312-01 OFNS-13-312-01B OFNS-13-312-19 2 26.8 21.2 19 28.2 Ø 7.92 0.8 - 1.6 1000

OFNS-16-S307-01 OFNS-16-S307-01B OFNS-16-S307-19 3 34.3 28.7 25.1 34.4 7.8 Square 0.8 - 2 1000OFNS-13-250-01 OFNS-13-250-01B OFNS-13-250-19 4 26.8 21.2 19 28.2 Ø 6.35 0.8 - 2 1000

OFNS13-S9.5M-01 OFNS-13-S9.5M-01B OFNS13-S9.5M-19 5 26.8 21.2 19 28.2 9.5 Square 0.8 - 2 1000OFNS16-S9.5M-01 OFNS-16-S9.5M-01B OFNS16-S9.5M-19 5 34.3 28.7 25.1 34.4 Ø 9.5 0.8 - 2 1000OFNS28-S9.5M-01 OFNS-28-S9.5M-01B OFNS28-S9.5M-19 5 43 35 44 55 9.5 Square 0.8 - 2 500OFNSB16-01A2-RT - OFNSB16-19A2-RT 6 34.3 28.7 25.1 38.9 0.8 thick adhesive, RMS-24 0.8 thick adhesive, RMS-24 500OFNSB13-01A2-RT - OFNSB13-19A2-RT 6 26.8 21.2 19 32.7 0.8 thick adhesive, RMS-24 0.8 thick adhesive, RMS-24 500

455


PANEL DETAIL, 1.6 THICK PANEL

SECTION A-A

Optical Fibre Rack BracketOFRB


• Mounts into a 19” rack with a 1/4 turn

Part NumberDimensions (mm)

Std Pack QtyA B

OFRB-1BK 11.7 11.8 100OFRB-2BK 9.3 9.5 100


OVER6,000NEWPRODUCTS

Buy online

Request free samples

Easy to � nd products

Download 3D CAD � les


THERE'S MORE ONLINE!

456

FIBRE BEND LIMITING TUBING AND ACCESSORIESFIBRE BEND LIMITING TUBING AND ACCESSORIESFIBRE BEND LIMITING TUBING AND ACCESSORIESFIBRE BEND LIMITING TUBING AND ACCESSORIESFIBRE BEND LIMITING TUBING AND ACCESSORIES

Optical Fibre Bend Limiting TubingOFBLT

• Optical Fibre Bend Limiting Tubing offers the ultimate protection to fibres eliminating problems such as crushing, kinking, and micro bending, while supplying an entire, self-managing solution to managing the routing of fibre

• Suitable for blown fibre applications over short distance and for curbside FTTH/FTTB applications

Tube & Pipe ClipTPCE

Part Number Dimensions (mm)Install Tool Required

Std Pack Qty(Metres)White PP, RMS-86 Black PBT, RMS-140

“D”+0.00-0.10

“d”+0.20-0.10

Standard VersionOFBLT-2.6-05-PP - 5.05 2.6 - 100OFBLT-3.1-05-PP OFBLT-31-05V0 5.05 3.1 - 100

- OFBLT-33-05V0 5.05 3.3 - 100OFBLT-42-635PP OFBLT-42-635V0 6.35 4.2 - 100

Pull-Cord VersionOFBLTP-26-505PP - 5.05 2.6 - 100OFBLTP-31505PP OFBLTP-31-505V0 5.05 3.1 - 100OFBLTP-42635PP OFBLTP-42-635V0 6.35 4.2 - 100

Slit VersionOFBLTS2.6-05-PP - 5.05 2.6 OFZT-2-14-RD 100OFBLTS-31-505PP OFBLTS-31-505V0 5.05 3.1 OFZT-3-14-BLK 100OFBLTS-42-635PP OFBLTS-42-635V0 6.35 4.2 OFZT-3-14-BLK 100

Part Number“A”(mm)

Std Pack QtyNatural UL94 V2

Nylon 6/6, RMS-01Natural UL94 V0

Nylon 6/6, RMS-19TPCE5-51-4M-01 TPCE5-51-4M-19 4 1000TPCE5-51-6M-01 TPCE5-51-6M-19 6 1000TPCE5-51-8M-01 TPCE5-51-8M-19 8 1000

TPCE5-51-10M-01 TPCE5-51-10M-19 10 1000

Bend Limiting Modulus of 5mm Diameter OFBLT

TO SNAP LOCK IN A Ø 6.5 ± 0.075 HOLE,

IN A 0.8 - 1.6 THICK PANEL

Ø 5.1 For OFBLT 5mm OD

Limiting Stiffness 0.42N/mm radius

Flexing Stiffness 0.052N/mm radius

LimitingRadius

BEN

DING

RES

ISTA

NCE

(N)

BENDING RADIUS (mm)Limiting StiffnessFlexing Stiffness

BLM = = 8

tel | +358 9 2522 1500 fax | +358 9 2522 1540

457

Optical Fibre Cable Breakout Unit OFCBU

Black UL94 V0 Nylon 6/6, RMS-19; Bolt: Stainless Steel

• At distribution points, multi-fibre cables need to have the individual fibres or cable elements separated and protected by a management system. The cable strength member has to be terminated and anchored to prevent damage to the fibres from cable movement or pull out

Optical Fibre Cable Gland BoxOFCBUGB

• Cable retention: >1.5kN


• Maximum of 24 cable elements or 24 fibre bundles

Optical Fibre ManifoldOFM


• The 1 into 4 Optical Fibre Manifold enables small multiple fibre cables with aramid and similar strength reinforcement or central GRP strength member to be mechanically and securely terminated. The manifold is stackable, and retains tubes greater than 100N. A development kit is also available that contains all adapters, OFM-4-05-19BLK

Part Number Cable Ø Contents Std Pack Qty

OFCBUGB-00 4 - 8.5Gland Box (OFCBU-24-05-19BLK)

Assembled1

OFCBUGB-0 10 - 20Gland Box (OFCBU-24-05-19BLK)

Assembled1

OFCBUGB-1 9.5 - 13Gland Box (OFCBU-24-05-19BLK)

Assembled1

OFCBUGB-2 13 - 18Gland Box (OFCBU-24-05-19BLK)

Sold Separately1

OFCBUGB-3 17.5 - 25Gland Box (OFCBU-24-05-19BLK)

Sold Separately1

Part NumberDimensions (mm) Std Pack

Qty“d1“ “d2“ “D“ “H“ “L“ “X“ “Y“OFCBU-24-05-19B 5 4.7 44 16 49 44 8 10

Optical Fibre Single Slotted Multi BracketOFSSMB

Black Glass-Filled UL94 V0 Nylon, RMS-104


• Holds a maximum of 3 tubes

• Ability to latch to other OFSSMB’s

Part Number Std Pack QtyOFSSMB-1-05GFBK 10

HOLE Ø5

HOLE Ø8.5-8.8

Part Number Incoming Cable Size Adapter Colour Std Pack QtyOFM-C-1-05-19BK 2.5 - 3.5 Black 10OFM-C-2-05-19BK 3 - 4 Blue 10OFM-C-3-05-19BK 4.1 - 5 Brown 10OFM-C-4-05-19BK 5.1 - 6 Green 10OFM-C-5-05-19BK 6.1 - 7 Red 10OFM-C-6-05-19BK 7.1 - 8.5 Black Rubber 10OFM-C-7-05-19BK 8.5 - 10.8 Black Rubber 10OFM-T-05-19BLK 5 OFBLT Split Black 10

OFM-T-635-19BLK 5 - 6.35 OFBLT Split Blue 10

REF.

FIBRE BREAKOUT AND MANIFOLDSFIBRE BREAKOUT AND MANIFOLDSFIBRE BREAKOUT AND MANIFOLDSFIBRE BREAKOUT AND MANIFOLDSFIBRE BREAKOUT AND MANIFOLDS


458

FIBRE BREAKOUT AND MANIFOLDSFIBRE BREAKOUT AND MANIFOLDSFIBRE BREAKOUT AND MANIFOLDSFIBRE BREAKOUT AND MANIFOLDSFIBRE BREAKOUT AND MANIFOLDS

Optical Fibre DuplexerOFD


• The Optical Fibre Duplexer enables cables with aramid strands to be broken out and mechanically terminated

• The Duplexer gives a range of input adapters to cover OFBLT, fibre bundles, cable and patch cords from 2.5mm to 7.00mm in diameter. For cables up to 10.8mm in diameter, a rubber sleeve is provided

• Tube retention: >100N

• For a Development Kit containing all adapters, order: OFD-C-05-19BLK

Optical Fibre Segment 90°, 30mm RadiusOFS90


• Assemble two pieces for bend control around a 180° turn

• In a four-piece assembled mode, stores approximately 60m of 900 micron fibre

Part Number Incoming Cable Size Adapter Color Std Pack QtyOFDC-1-05-19BK 2.5 - 3.5 Black 10OFDC-2-05-19BK 3 - 4 Blue 10OFDC-3-05-19BK 4.1 - 5 Brown 10OFDC-4-05-19BK 5.1 - 6 Green 10OFDC-5-05-19BK 6.1 - 7 Red 10OFDC-6-05-19BK 7.1 - 8.5 Black Rubber 10OFDC-9-05-19BK 8.5 - 10.8 Black Rubber 10OFDC-7-05-19BK 5 OFBLT Split Black 10

OFDC-8-635-19BK 6.35 OFBLT Split Blue 10

PartDimensions (mm)

“L“ “W“ “w“ “H“ “d“OFD series 49.6 16.2 13.2 8 5

SUGGESTED MOUNTING HOLE LOCATION

SEE TABLE

Part Number

Panel Thickness Range

Mounting Hole Ø

Std Pack Qty

SRV0-3035 Up to 1 3.1-3.2 1000SRV0-3045 1-2 3.1-3.2 1000SRV0-3055 2-3 3.1-3.2 1000SRV0-3065 3-4 3.1-3.2 1000SRV0-3075 4-5 3.1-3.2 1000SRV0-3080 4.5-5.5 3.1-3.2 1000SRV0-3090 5.5-6.5 3.1-3.2 1000SRV0-3100 6.5-7.5 3.1-3.2 1000

Part Number Std Pack QtyOFS90-30R 100

Mounting Rivets

REF.

REF.

TYP.

TYP.

TYP.

tel | +358 9 2522 1500 fax | +358 9 2522 1540

459

FIBRE STRAIN RELIEFFIBRE STRAIN RELIEFFIBRE STRAIN RELIEFFIBRE STRAIN RELIEFFIBRE STRAIN RELIEF

Quick Panel Mount Strain Relief GlandEFA52-XX-ASS

Black UL94 V-0 Nylon 6, RMS-390

• Provides added protection to jacketed and bare fibre while routed through a hole

Quick Panel Mount Strain Relief Gland, Slot in VersionEFA52-03-ASS

Black UL94 V-0 Nylon 6, RMS-390

900 Micron BootEFA70-01-001

Black TPE, RMS-185

• Other colors available by special order


Part Number “A” (mm) Std Pack QtyEFA52-02-ASS 3.5 250EFA52-05-ASS 2.5 250


FIBER CAP(1) LOOSE and

(1) TIGHT supplied with kit

FIBER CAP(1) LOOSE and (1) TIGHT supplied with kit

M9 x .75 Nut

Strain Relief Boot 900 Micron FibreEFA70-07-001

Black TPE, RMS-185

Part Number Hole Ø Panel Thickness Std Pack QtyEFA70-07-001 4 1.6 500


460

Ø 2.5mm Ferrule Dust CapEFA02-52-001

Black TPE, RMS-185

One-Piece Dust Cap and TieEFA02

Black PVC, RMS-186

One-Piece ST Adapter Dust Cap and TieEFA02-35-001

Black TPE, RMS-185



4 HOLES DIA 2.38

9.5 TYP

EQUISPACED

Part Number ContentsDimensions (mm)

Std Pack Qty“A” “B” “C” “D”

EFA02-08-ASS One-Piece Biconic Dust Cap & Tie 23.5 22 13 10.4 250EFA02-11-ASS One-Piece FC/ST Dust Cap & Tie 18.5 17 12 8.7 250EFA02-13-ASS One-Piece ST Connector Dust Cap & Tie - - 15.3 12 250

BLANKING PLUGS AND CAPSBLANKING PLUGS AND CAPSBLANKING PLUGS AND CAPSBLANKING PLUGS AND CAPSBLANKING PLUGS AND CAPS

tel | +358 9 2522 1500 fax | +358 9 2522 1540

461

Dust Caps with Metal ChainEFA02

Stainless Steel/Black TPE, RMS-185

• The mounting hole for EFA02 14 is a blind hole and does not expose the adapter/connector and can be used on its own. Other dust caps in this series require the retaining chain and cannot be sold separately, as this leaves a hole exposing the connector/adapter

• Type 1 - Stainless Steel Cap & Chain

• Type 2 - TPE Cap, Stainless Steel Chain

FC Adapter Dust CapEFA02-03-XXX

HDPE, RMS-183

• Available in different colours

Adapter Dust CapEFA02-43-XXX

Black PVC, RMS-187

Part Number Contents Std Pack QtyEFA02-14-001 SC Adapter Dust Cap 250EFA02-14-ASS EFA02-14-001 Dust Cap with Chain 250

Part Number Contents “L” ID “T” At Open End Std Pack QtyEFA02-43-001 SMA Connector Adapter Dust Cap 12.7 3 1 500EFA02-43-002 ST Adapter Dust Cap 12.7 7.1 1 500EFA02-43-003 FC Adapter Dust Cap 8 7.1 1 500

Part Number Contents Std Pack QtyEFA02-04-ASS EFA02 04 Dust Cap and Chain 100EFA02-07-ASS EFA02 07 Dust Cap and Chain 100EFA02-09-ASS EFA02 09 Dust Cap and Chain 100EFA02-10-ASS EFA02 10 Dust Cap and Chain 100

EFA02-04-ASSSMA Adapter Dust Cap

Assembly

EFA02-07-ASSDIN Adapter Dust Cap

Assembly

EFA02-10-ASSST Adapter Dust Cap

Assembly

EFA02-09-ASSFC Adapter Dust Cap

Assembly

Typical Assembly for EFA02 SeriesDust Caps with Metal Chains

EFA02-14-ASSSC Adapter Dust Cap Assembly

Type 2

Type 1

Part Number Color Std Pack QtyEFA02-03-001 Natural 500EFA02-03-002 Black 500EFA02-03-003 Green 500EFA02-03-004 White 500EFA02-03-005 Red 500



462

Optical Fibre Bend Limiting Tubing ClipOFBLT-C1

Natural

Optical Fibre Connector Cutout Adapter - SC/STOFCA-SC/ST-01

Natural Nylon 6/6, RMS-01

• Converts a hole cut out for an SC connector into a hole cut out for an ST connector

Part Number Std Pack QtyOFCA-SC/ST-01 1000

Part Number Material Std Pack QtyOFBLT-C1-5-01 UL94 V2 Nylon 6/6, RMS-01 1000OFBLT-C1-5-19 UL94 V0 Nylon 6/6, RMS-19 1000

USB Connector PlugCP-USB-B

Black

Part NumberStd Pack Qty

Silicone Rubber, RMS-383 EPDM Rubber, RMS-427CP-USB-B CP-USB-B-429 1000

HOLE DETAIL PANEL THICKNESS:

1.4 - 3.5

TO HOLD OFBLT-XX-05-XX

TO SNAP FIT IN A 6.4+0.0/-0.2DIA. HOLE,

IN A 0.8-2 THICK PANEL

REF

REF

REF


tel | +358 9 2522 1500 fax | +358 9 2522 1540

463


Blanking PlugsBPE

UL94 V-2 Nylon 6/6, RMS-01

• ST Series covers “Double-D,” “D” or round hole cutouts for unused terminals in fibre optic boxes

RJ Connector PlugsCP-RJ

Black

USB Connector PlugsCP-USB-A

Black

Part Number TypeDimensions (mm) Hole Size

Panel Thickness ColourStd

Pack Qty“A” “B” “C” “D” “E” “L1” “L2”BPE-SC-1-01 1 21.5 12.8 12 9.3 1.5 13 9.5 1.4 - 3.5 Black 1000BPE-SC-2-01 1 16 12.8 12 9.3 1.5 13 9.5 1.4 - 3.5 Black 1000BPE-SC-3-01 1 34.8 25.8 12 9.3 1.5 26 9.5 1.4 - 3.5 Black 1000BPE-RJ45-01 1 22 14.7 17.7 19.1 1.5 19.3-20 14.9-15 0.75, 1.2, 1.6, 2.7, 3.5 Grey 1000

BPE-RJ45-01BK 1 22 14.7 17.7 19.1 1.5 19.3-20 14.9-15 0.75, 1.2, 1.6, 2.7, 3.5 Black 1000BPE-RJ45-01WH 1 22 14.7 17.7 19.1 1.5 19.3-20 14.9-15 0.75, 1.2, 1.6, 2.7, 3.5 White 1000

BPE-LC-D-01 1 15 13.2 15 13.2 2 13.5 13.5 0.75, 1.2, 1.6, 2.7, 3.75 Black 1000BPE-ST-1-01 2 Ø12 Ø9.2 Ø12 7.7 1.5 Ø9.4 7.9 1.4 - 3.5 Black 1000

Type 1 Type 2

Part Number “A” (mm) To Accommodate Material Std Pack QtyCP-RJ11 10.5 RJ11 Connector Silicone Rubber, RMS-383 1000

CP-RJ11-427 10.5 RJ11 Connector EPDM Rubber, RMS-427 1000CP-RJ45 12.5 RJ45 Connector Silicone Rubber, RMS-383 1000

CP-RJ45-427 12.5 RJ45 Connector EPDM Rubber, RMS-427 1000

Part NumberStd Pack Qty

Silicone Rubber, RMS-383 EPDM Rubber, RMS-427CP-USB-A CP-USB-A-429 1000


optimal solutions - essentra components · where ˜ bre breakout is required, ... 436˚439 440˚446...

Documents