Optics – Lighting – Cameras –Computer equipment –

Accessories – Dedicated systemsVision Equ

ipment

Software…Acquisition – Archiving – Database – Report – Shape characterization –

Morphometry – Particle counting- Phase analysis – Granulometry – Dimensional measurement – Grain

analysis – Thermo-Video - Mapping

2

Microscopes

Microvision has agreements with all major microscope manufac-turers. The microscopes illustrated below only represent part ofthe available range.

ZeissThe Axioimagermicroscope is usedfor material obser-vation, qualitycontrol, researchand development. Itcan be equippedwith transmission

and reflection or even fluorescence ligh-ting. Its retort stand is designed for motori-zed systems. Réf : AXIOimager

The Nikon LV150 is amicroscope dedicatedfor industrial inspectionRéf : LV150

The BX51 micro-scope offers trans-mitted and reflectedlighting. The twoillustration modescan be equippedwith the blackb a c k g r o u n d

module. It can perform fluorescence obser-vations when equipped with the univer-sal illuminator. Réf : BX51

Nikon

Olympus

Nikon

The TE2000 is aninverted micro-scope that can beused for observingliving cells. Its infi-nite optical pathallows the instal-lation of motorizedstages and large Peltier effect stages. Réf: TE2000

Motic

The Motic economy

range proposes micro-

scopes equipped with all

observation modes.

These retort stands sup-

port indexed and motori-

zed manual stages with

small paths. Réf : MOTICBA

Microvision provides the following ser-vices for all equipment:

• 72-hour after-sales service• Microscope maintenance• Inspection• Calibration• Preventive and corrective maintenance • Service traceability

(maintenance sheet, inspection report,calibration certificate)

After-sales service

3

Stereo zoom and zooms

Binocular magnifiers or mono-zooms allow you to view and mea-sure objects measuring between 5µm and a few mm.

Navitar

working distance of 32mm –

341mm, the size of the visible

field can be enlarged from

0.5mm to 82mm, i.e. a magni-

fication of between 6x and

567x with an additional optic

system and a 1/ 2“camera. Réf : Nav12x

Nikon

The SMZ 1270 is aStereo-microscopezoom with a zoomratio of 12,7 : 1(0.63 x – 8.0x)equipped with apo-chromatic lenses foran optimal contrast,an accurate color rendering and a greatrichness of details. Magnification from 4 xto 480 x. Réf : SMZ1270

Hirox

The Hi-Scope KH3000 is anindependent system dis-playing 1600 x 1200 imagesfor 20X – 3000X magnifica-tions.Hirox proposes independentoptical systems that can becoupled with existing came-ras. An original option

allows you to view objects from 360°.Réf : KH-3000

Elvitec

The VDM_HD zoom lens is equipped with a digital

color CCD and

offers a comfortable

m a g n i f i c a t i o n

range (10 x or 20 x)

Objects measuring

5mm – 120mm can be visualized with additional

lenses. The VDM can be remote-controlled by the

computer. Réf : VDM_HD

Microvision

The Microvision

Macro-fluo combine a

motorized filter wheel

and a Navitar zoom

which allows the

automatic acquisition

of wells from 96-well

plate stained with dif-

ferent fluorochromesRef.: Macro_fluo

Zeiss

The V20 is stereo micro-scope with a zoomratio 20:1 allowing atotal magnification of345 x. It is equippedwith motorized columnand a encoded objec-tives turettRéf : V20

4

Lenses – Macro photography

Fixed-focus or zoom lenses allow you to visualize objects from afew mm to infinity.

Navitar

The Navitar 7000 Zoom lens(18mm – 108mm focus)allows you to work at a fron-tal distance of 127mm to infi-nity with video field sizesranging from 3.2mm for aworking distance of 127mmto 16mm for a working dis-tance of 300mm. By default,

the field extends from 184mm to 394mm withan object distance of 30cm – 102cm. Ref.: Nav7000

Avenir

The very luminous 12.5 x75mm Zoom lens (apertureof 1.8) is equipped with amacro position for use atshort working distances. Instandard mode, the mini-mum distance is 1.20mRéf : AV12-75

Computar

The MLH10 X zoom has azoom ratio of 10x and pre-sents the following characte-ristics:Working distance of 15cm fora field of view of 8mm –80mm.Working distance of 35 cm fora field of view of 21mm –210mm. Réf : MLH10X

VDM - OEM

The VDM_HD zoom lens isequipped with a digital colorCCD and offers a comfortablemagnification range (10 x or 20x)Objects measuring 5mm –120mm can be visualized withadditional lenses. The VDM can

be remote-controlled by the computer.

Réf : VDM_HD

Macro-photography benches

The reproductionbenches can be pro-posed in severalsizes for the columnand the baseboard.The column is eitherof the friction type orthe pinion type.Réf : MacRofRéf : MacRoc

The reproduction benches can be equipped withspot lighting or diffusion lighting equipped withfluorescent tubes Réf : spot4 ou Réf : Diffhal2

5

Lighting techniquesThe success of an image analysis measurement system is 70%dependent on the lighting. The microscopes are often equippedwith several lighting techniques.

Bright Field

Bright Field lighting is the simplest observation technique. The light is transmitted directly viathe preparation or reflected by the sample.

Dark field

It is an oblique illumination technique used afterpart of the light has been stopped by an opaque fil-ter (e.g. Membrane between two slides).

Polarization

Polarization uses two polarizers on bothsides of the sample that orientates the lightaccording to the observed structures.

Interferential Contrast (D.I.C)

Phase contrast

The light passing through 2 rings situated in thelens and the condenser illuminates the object’scontour.

The interferential contrast, also calledNormarski, is obtained via a polarized lightguided by a prism.

Fluorescence

The ultraviolet rays stimulate certain molecules in the samples that emit energy resulting in a visiblewavelength passing through a filter. This low-level light technique requires signal intensification viaimage accumulation.

6

Lighting systems

Light sources

Cold light sourcesRéf : Schott KL1600 (150 W) LEDRéf : Photonic F3000 (150W) LED

Ring

Min. ring – Ref.: AnnMiniCircular ring – Ref.: AnnCirc

Backlight

LED backlight – Ref.: LedBackFiber backlight – Ref.: FosBack

LED ring – Ref.: LedAnnuDF LED ring– Ref.: DF_Annu

Color filters

Filters for KL 1500 – Ref.: Coul1500Focalizer for guides – Ref.: FoCond

Optical fibers Coaxial

Guide for semi-rigidlights - -Réf : Cond-26

Coaxial lightguideRéf : Coaxfib

Light tables

Lighttableaccordingto dimen-sions

Fluorescence

Cubes for fluores-cence: (upon request)

Microvision canprovide the entireSchott range uponrequest

7

Analog/ Digital camerasThe camera offer is very diversified; Microvision has selected a cer-tain number of monochrome or color mono-sensor and tri-sensorCCD cameras.

Digital color camera MONO CCD

Sony XC-ST50- 1/2“ – stan-dard CCIR -monochromeRef : XCST50

Analog camera (25 images per second)

Kappa - 1/2 “ CCIR -ColorRef : Argon SDC212

Sony XCD IEEE-1394bColor CCD 1/3 “ Color CCD 1/1,8“ Réf : XCD-SX90 CR (1280 x 960)Réf : XCD-U100 CR (1600 x 1200)

Color Camera Lumenera - USB3Sensor - 2/3” Sony ICX674 CCD sensor color and monochrome2.8 Megapixel (1940 x 1460)4.54 x 4.54 μm pixelRéf : LT365 (1940 x 1460)

Camera Sony EV7500 Color camera 1/2.8 format 16/9type CMOS, 2.38 M pixels Zoom autofocusOutput : HD-SDIControl via RS232Réf : DVM_30x_Qualis

Remote control via KeyboardMonochrome or ColorPower supply 12 vdc

D

I

8

Digital cameras

All digital cameras are connected to a standard USB3 - RJ45 - Firewire B800

Color MONO CCD digital cameras (7.5 – 15 images per second) MONO CCD

Monochrome Digital Camera

Baumer TXD14 M-1394b- Monochrome CCD 2/3 “Réf : TXD14M (1392 x 1040)

JAI 3CCD 1/1,8 “- 3CCD - 1600 x 1200 npixels.GigaEthernet connexionRef : Jai200Ge

Qimaging Retiga R3 ColorSensor Type - CCD Array : Sony ICX-674 - Size : 1920 x 1460Pixel Size : 4.54μm x 4.54μm - (11mm diagonal)Exposure Time Range - Sensor CoolingRéf : RETIGA_C

Microvision (USB-3) - CCD1/1.8 " Sony CCD, Global1600x1200 pixel (4,4 µm) - 2 MegaPixelsRéf : CCD-2MC

BlackFly - CMOSSony IMX249 1/1.2” CMOS; Color or B/W; 1920 x 1200; 25 FPS; C-mount Réf : BLFLY_Mv

Microvision (USB-3) - CCDSony IMX249 1/1.2” CMOScolor ;1920 x 1200; 25 FPS;C-mount Réf : MV CMOS-2.3Mc

Qimaging Retiga R3MonochromeSensor Type - CCD Array : SonyICX-674 - 1920 x 1460Pixel Size : 4.54μm x 4.54μm -(11mm diagonal)- Exposure

Time Range - Sensor CoolingRéf :RETIGA_M

Sony XCG5005 CR1/1,8 “ - 5 MillionsSize : 2448 x 2050 .ConnexionGigaEthernet.Réf : XCG5005 CR

9

Computer equipment - Interfaces

Microvision has chosen Dell equipment for cost and hardware qua-lity reasons. We remain open to any installation on other equip-ment.

Computer

Dell Optiplex series with Dell 17” – 27” screen – Ref.: depending on configuration

Interface box

IEEE 1394 card

Unibrain USB3 card – 3 inputs – connector for additional power supply - Réf : Unibrain_USB3_ Réf : CABUSB3

D

IEEE1394 Video Converter - Ref.: DFG1394

10

Peripherals - AccessoriesMicrovision is compatible with the peripherals as follows :Märzhäuser for the X,Y,Z manual and motorized stages andLinkam for the hot-stages

X,Y motorized stages

Scan 100 x 100mmaccuracy: ± 3µmRef.: Scan100-100

Indexed stages with coders and rulers

Hot stages

Scan75 x 50 mm accuracy ± 3 µmRéf : R-Scan75-50

Marzhauser card for controlling X,Y tables and Z-axesfor autofocus - Réf : Tango

Joystick forX,Y table –and Z-axis

Scan150 x 150mm accuracy : ± 3µmRef.: Scan150-150

Märzhäuser 400 x 450 mm accuracy: ± 5µmRef.: Scan_vir

75 x 50mm scanaccuracy : ± 1µm with encodersRéf : SCD75-50

Controller / CoolingsystemRéf : LNP

TS1500(ambient -1500°C)Réf : TS1500

THMS 600 Linkam-(ambient + 600 °C)Réf : THMS600

LTS420 (ambient + 420°C)Réf : LTS420

Dedicated equipment – Slide

Upon request, Microvision will study complete systems forintegrating optical and mechanical solutions (X,Y table)adapted to your application.

Mechanical systems

Micrometers – Glass rulers – Standard slide

Réf : S1 - Réf : PS1 110mm /0.1mmRef.: S8 – Ref.: PS81 mm / 0.01 mmRef.: PS8_cal with certificateRef.: PS1_cal with certificate150mm calibration rulers.Ref.: PS150

stand for macro fluorescenceacquisition

Counting system withzoom

Equipment for granulome-tric analyses

Régles d’étalonnagede 150 mm.Réf : PS150

The standard slideallow you tocheck the measu-rements taken bythe counting soft-ware.The chrome particles are engraved atrandom by alaser on stan-dard slides.Customized testpatterns can beengraved fromcomputer diagrams.

Machine for Dimensionalmeasurements

Endoscopes Colony counting benchwith black backgroundlighting. Ref.: Bcolo

Ref : MEFTX

11

Maintenance – Hot-line - Software

Microvision provides all computer consumables (prin-ter paper, ink cartridges, etc.) and all spare parts for allmicroscopes (lenses, bulbs, micrometers, etc.).

Consumables

MICROVISION INSTRUMENTSS.A.S. with a capital of 135,000 EurosCE 1750 - Z.I. Petite Montagne Sud1, rue du Gévaudan - 91047 EVRY Cedex - FRANCETél : 33 (0)1 69 11 15 50 Fax : 33 (0)1 69 11 15 51e-Mail : info@microvision.fr - Web site : www.microvision.fr

Software

Module descriptions Name Ref

Acquisition, archiving, database, report Archimed AADRMeasurement Option Archimed MesMapping option Archimed CMultifocus option Archimed MAVI films option Archimed FManual measurements Videomet VMETGrain sizer Grainsizer GSZPhase measurements Areas ARSMapping and automatic Z stacks Cartograph CARTGranulometry Granix GRAXShape characterization Ellix ELLXParticle pollution counting Filtrex FTEXManual morphometry Saisam SASAutomatic color morphometry Histolab HLABSpot counting Spot SPOTTime-lapse for events Replay VTR

In addition to standard software, Microvision also develops specific software according to spe-cifications (Adaptation to CFR21 PART11 specifications, Sieve control software, Elispot coun-ting software, Radial immuno-diffusion reading software, etc.)

Microvision provides the following servicesfor all equipment :• 72H after-sales services• Microscope maintenance• Inspection

• Calibration• Preventive and corrective maintenance • Service traceability (maintenance sheet,inspection report, calibration certificate)

Services