Rev.1 03/02/2012 P 1

Facts

Benefits

• Easy to install

• Easy to manage and use

• Easy to interface

• Zero Time for development

• Open source

compact USB Programmer

• Mini USB connector

• 6 pin programming

interface

• Easy install drivers

• openPICUS Free IDE

• Serial Bootloader

• 5V power supply

• 51*27.5mm

Devices

• Flyport Wi-Fi

• Flyport Ethernet

• Expansion Nests

info@eikonsite.it www.eikonsite.it tel +39 0721 0730896 Eikon srl, Rome (RM), Italy

Introduction

Each Flyport module has a serial bootloader preloaded onboard.

The miniUSB PROGRAMMER is a USB to Serial (UART) con-

verter with a 6 ways female pin header connector. It is the standard programming interface for the expansion boards.

The miniUSB PROGRAMMER provides 5V power supply to the

boards.

The miniUSB PROGRAMMER is 100% compatible with the openPICUS Free IDE

USB interface mini USB B-type (cable not provided)

Programming interface 6 ways pin header at 2.54mm (0.10”) pitch

Device Reset MOSFET onboard

Communication RESET and UART communication

Power supply 5V output

Compact dimensions 51 * 27.5 mm

Rev.1 03/02/2012 P 2

JP2 PINOUT — Programming Connector

Pin Name Function

1 +5V 5V power supply

2 NC NC

3 GND Ground power supply

4 RX UART RX signal

5 TX UART TX signal

6 RESET Flyport Modules Reset

info@eikonsite.it www.eikonsite.it tel +39 0721 0730896 Eikon srl, Rome (RM), Italy

compact USB Programmer

Technical Informations

Electrical USB

Power supply 5V from USB Cable USB 2.0 Full speed compatible

Onboard LEDs for TX and RX visual feedback

Mechanical

Operating Temperature -20..+85°C

Dimensions 51*27.5mm

Mechanical info

powered by technology

Rev.1 03/02/2012 P 3

info@eikonsite.it www.eikonsite.it tel +39 0721 0730896 Eikon srl, Rome (RM), Italy

Applications development

Please visit openPICUS project website www.openpicus.com to download the IDE, a

getting started guide and some apps examples and libraries.

The suggested starter kit is composed by: • miniUSB PROGRAMMER (to download firmware) Code.015371

• Proto NEST Code.015376 • Flyport Wi-Fi module Code.015350 or Code.015353

• Flyport Ethernet module Code.015356 or Code.015357

Each FlyPort Module has a serial bootloader onboard.

Eikon srl

Via Giacomo Peroni 442

00131 Rome (RM) Italy

Tel +39 06 92916378 Fax +39 0721 054588

Web www.eikonsite.it Email info@eikonsite.it

Partner

Buy online from www.eikonsite.it or contact your local reseller.

miniUSB PROGRAMMER

Product Code 015371

ORDERING INFORMATION

compact USB Programmer