opalo 1
TRANSCRIPT
OPALO• Die-cast aluminium body• High performance photometry• Economical luminaire• Easy installation
NEW
The Opalo 1 luminaire was specifically developed for high-pressure sodium tubularlamps up to 100 W or for mercury vapour lamps up to 125 W.
Tightness: IP 65 (*)
Aerodynamic resistance (CxS): Opalo1 0,30 m2
Impact resistance (PC): IK 08 (**)
Electrical insulation class: I or II (*)
Weight (empty): Opalo 1 1,8 kg
Opalo 3 3,5 kg
(*) According to EN 60598(**) According to EN 50102
DESCRIPTION
Public lighting luminaires for lamps up to 125 W (Opalo 1) or 250 W
(Opalo 3). The Opalo luminaire consists of a painted (RAL 7040)
die-cast aluminium body, a deep-drawn, polished and anodised
aluminium reflector and an injected polycarbonate protector.
Access is gained to the lamp and control gear by undoing three
closing clips (two for the Opalo 1) and tipping the protector around
two integrated hinges.
A gasket fitted in a groove in the protector ensures the luminaire
tightness.
The control gear plate also supports the lampholder; it can be
easily removed.
OPTIONS
- Dimmer switch.
- Body painted any RAL colour.
- Closing clips in stainless steel.
CHARACTERISTICS
OPALO 1OPALO 3
The Opalo 3 luminaire was developed for high-pressure sodium or mercury vapourlamps up to 250 W.
Opalo 1: Stone bridge in Nisu, Serbia and Montenegro.
B
P
L
H
Ø
A Schréder Product
®
l
DIMENSIONS - MOUNTINGS
Opalo 1 Opalo 3
I 255 mm 325 mm
L 400 mm 600 mm
H 210 mm 295 mm
Ø 48 mm 60 mm
P 100 mm 115 mm
The luminaire body is also the load-bearing part for side mounting with two grub screws.
Die-cast aluminiumbody.
Side mounting.
Three closing clips (two for the Opalo 1)placed on the side give access to the
lamp and control gear.
Plate holding the control gear andremovable lampholder. The Opalo 3 is fittedwith a control gear plate in syntheticmaterial equipped with a handle to facilitatethe maintenance operations. The controlgear is laid on the plate and not suspended.
Injected polycarbonateprotector.
Facet-anodised and polished, deep-drawnaluminium reflector.
Two integratedhinges.
MAINTENANCE
OPALO
Access to the lamp and control gear through three (two for the Opalo 1) closing clips. The Opalo 3 is fitted with a control gear plate in synthetic material equipped with ahandle to facilitate the maintenance operations. The control gear is laid on the plate andnot suspended.The control gear plate is fixed with 3 screws.
A silicone gasket fitted on the protectorgives an IP 65 degree of tightness to the
entire luminaire.
90°
75°
60°
45°
30°15° 0°
480 400 320 240160 cd/klm
90°/270°20°/160°
80
50W 70W 100W 80W 125W 42W 57W 70W
1640
1812
150W 250W 250W 150W 250W
90°
75°
30°15°
45°
60°
0°
cd/klm
15°/165°
90°/270°
400 333 200 123266
90°
75°
30°15°
45°
60°
0°
120 cd/klm
30°/150°
90°/270°
360 300 240 18090°
75°
30°15°
45°
60°
0°
cd/klm
35°/145°
90°/270°
240 200 120 80160
High-pressure sodium 70 W tubularReflector 1640Smooth protector (PC)
OPALO 1
PHOTOMETRY
The Opalo 3 luminaire is fitted with an adjustable lampholder support. Different positions are available in order to adapt the light
distribution according to the site to be lit. Position can be adjusted on site.
LAMPS - REFLECTORS
Clear tubular lamp
Coated elliptical lamp
Compact fluorescent
High-pressure sodium
Mercury vapour
Compactfluorescent
Metal halide
Opalo 3
Opalo 1
High-pressure sodium 150 W tubularReflector 1812Smooth protector (PC)
High-pressure sodium 250 W tubularReflector 1812Smooth protector (PC)
Mercury vapour 250 W Reflector 1812Smooth protector (PC)
OPALO 3
OPALO 3OPALO 3
2897
5•TF
-OPA
L-2L-2
003-
06-A
N01
Website: www.schreder.com