Before operating the Washing Machine, Please read thisGuide thoroughly, and retain this manual for future reference.

WASHING MACHINES

User’s ManualHYDROFALL SERIES...

MODEL : HYDROFALL 72BS

HYDROFALL 72BS

1

2

2

3

3-4

5

5-6

6

7

Contents :

* PARTS IDENTIFICATION .................................................

* SAFETY PRECAUTION ........................................ ......

* ......................................

* ................................................. .

*

* INSTALLATION ...............................................................

.....

* PREPARATION BEFORE WASH ......................................

OPERATING INSTRUCTIONS

* TROUBLE SHOOTING ....................................................

MAINTENANCE ..........

* TECHNICAL SPECIFICATIONS .......................................

ONIDA SERVICE CENTRES ............................................

* WARRANTY CARD

“Proper use of Washing Machine Saves Electricity & Time”

Congratulations ! You are now a proud owner of

Washing Machine. We would particularly advise you to study the User's manual

carefully to get the best out of your Onida Machine and please take the

precautions mentioned on the following pages.

Onida HYDROFALL 72BS

Once again, Welcome to the happy ONIDA family.

Dear Customer,

PARTS IDENTIFICATION

- 1 -

ACCESSORIES

Inlet hose Spin cap

Wash Timer KnobWash-Drain

Selector Knob Spin Timer Knob

Magic Lint Filter

Brush

- 2 -

INSTALLATION

INSTALL ON A STABLE LEVEL SURFACEInstall washing machine on a stable level surface.

Keep the washing machine more than 25cm from the wall to prevent a noisy sound while spinning.

A carpet must not obstruct the ventilation openings.

CONNECT THE DRAIN HOSEExtension Drain Hose Never let the end of the drain hose be immersed in water

CONNECTING POWER AND GROUNDING CAUTION:

Never connect the earth wire to a gas pipe, a tapwater pipe, a phone wire or lightning rod.Do not use the washing machine in case the powercord or plug have been damaged, so as to avoidelectric shock or risk fire.

If the supply cord is damaged, it must be replacedby the manufacturer or its service agent or a similarlyqualified person in order to avoid any mishap.

Avoid connecting several electric appliances tosingle outlet.

Always remove the power cord from wall socketwhile cleaning.Always switch off the power when not in use.

Washer earth is connected to the power plug; don't alter it.

The appliance must be positioned where the plug is accessible.

Ensure that the earth wire is installed securely in thepower socket.

25cm

SAFETY PRECAUTIONS

Do not expose the washing machineto direct sun light or rain.

Do not install the washing machinenear a damp place.

Do not sprinkle water over switches.

Let water drain away fromthe drain hose thoroughly.

When plugging out the powercord, do not hold the wire.

Keep children away from thewashing machine.

Keep the washing machine away from fire orheat source such as heater, candle, cigarette etc.

Do not wipe the washing machinewith volatile material, gasline, etc.

Do not pour over 50°C water into the tub.

The appliance is to be connected to the water mains using new hose-sets and old hose-sets should not be reused.

- 3 -

OPERATING INSTRUCTIONS

WASH

Put the appropriate amount of detergent in the detergent drawer depending on the amount of laundry.Put the laundry in the tub and add water upto the desired water level depending on the laundry to be washed.Select the WASH TIME / WASH PROGRAM as explained below :

Step A

PREPARATION BEFORE WASH

Be sure to remove things such as keys, pins and coins from the laundry. Wash oily or dyed laundry separately.

Wash fuzzy laundry by turning it inside out. Wash delicate clothes, wrapping them in a nylon net.

Insert the power plug into the power socket.

Let the drain hose stay down.

Connect the inlet hose.

Select the wash program NORMAL or HEAVY according to the kind and quality of laundry.Recommend to use SOAK program for heavily soiled laundry (ref table below for time selection)

Set the desired wash time by turning the knob clockwise (ref table below for time selection).Select the Wash-Drain Selector to Wash.

Fabric Type Cotton, Workclothes, Linen Heavily Clothes

Wash Time 12-15 min 12-15 min

Program Normal Heavy

Heavily soiled cotton clothes

35 min

Normal / Heavy

WASH TIMER

35

WASH-DRAIN SELECTOR

Drain

Normal

Heavy

OPERATING INSTRUCTIONS

After washing is complete, drain the water by setting the WASH-DRAIN SELECTOR knobto DRAIN position.

Note :

a) SOAKING IS PROVIDED FOR BETTER CLEANING OF CLOTHES.

b)

c)

SOAK TIME BY DEFAULT WILL BE 20 MIN. SO TOTAL TIME OF CYCLE WILL BE SOAK + WASH TIME (20 MIN +WASH TIME).

SOAK FUNCTION

The clothes should rotate freely during the washing for better results. Reduce the clothes load / increase the waterlevel to achieve the free movement of clothes.

IN SOAK OPTION, MACHINE OPERATES FOR 2 MINUTES AND REMAINS OFF FOR 5 MINUTES. THIS CYCLEREPEATS FOR ENTIRE SOAK TIME.

INTERMEDIATE SPIN

Transfer the laundry to the spin tub, arrange it evenly and place the spin cap on top of the laundry tightly and horizontally.

Set the spin timer to 2-4 minutes.

Note : Do not open the Spin Lid while spin tub is running.

RINSE

1. SOAK RINSE – This is recommended for normally soiled clothes.

Transfer the laundry from spin tub to the wash tub.Set the WASH-DRAIN SELECTOR knob to wash.Take the water up to appropriate level.Set the wash time to 4 to 6 minutes. Soak rinse will be performed.

2. OVER FLOW RINSE – This is recommended if more detergent was used or for baby clothes.

Transfer the laundry from spin tub to the wash tub (after step B).Set the WASH-DRAIN SELECTOR knob to wash.Take the water up to appropriate level.Set the wash time to 4 to 6 minutes. Overflow rinse will be performed.Keep the water tap on so the water flows while the rinse is being performed.

3. SPIN SHOWER RINSE/WATER SAVER RINSE – This is recommended for less soiled cloths / for water saving.

This to be performed after Step B.Set the water selector to SPIN INLET.Open the water tap and allow the water to flow to spin tub.PLEASE ENSURE THAT THE SPIN TUB IS NOT ROTATINGAND WATER TAP IS OPENED PARTIALLY.After about 2 minutes close the tap.Set the spin timer for 2 minutes.

Distribute laundry evenly in tub Put the Spin Cap in place

Clothes

Spin Tub

Step B

Step C

Note :

Ensure Spin Cap is pressed

on top of clothes.

Do not leave the water tap open while the spin tub is rotating. This will lead to wastage of water andpossible malfunctions.

Spin Cap

SPIN DRYING

Transfer the laundry to the spin tub, arrange it evenly and place thespin cap on top of the laundry tightly and horizontally.

Close the inner and outer spin lids.

Turn the "SPIN TIMER" knob clockwise to the desired time. The spindry process will begin.

Type of the clothes

Shirts (synthetic)

Undershirts

Work clothes

Spin-drying time

1-2 min

3-5 min

5 min

Step D

- 4 -

MAINTENANCERemove the power plug after washing.

Wipe the washer clean and dry with a soft cloth.

Must clean tubs after bleaching or starching, otherwise, somedeposit will be created.

CAUTION : It is advisable never to run the machine without Magic lint Filter Assembly as foreign lint may damage the machine.NOTE : In case of Magic Lint Filter damage, please replace with new unit available at your ONIDA Service Cenre near to you.

TROUBLE SHOOTING

Is the wash timerknob at the "0" position?

Is the pulsator clogged?

Is the spin control knob atthe "0" position?

Is the lid open? Is the laundryunevenly balanced?

Is the drain hose notkept down?

Is the drain hose twisted?Or is the threshold too high?

Is the drain hose frozen?

Is the clothes load too much?

Troubles Check up

No washing

No spinning

No drain

Washing is forceless

IF YOU NEED HELP : In case the problem is not solved, contact your local ONIDA service centre for your service requirement.35

Is the voltage too low?

Clean the waste thread collected in the Magic Lint filter.

- 5 -

Push the upper

part of the filterand pull in.

Open the cover

as shown inthe figure.

Clean the filter.

Close the cover and insert the

lower part of the filter in the

basket first and then push the

filter with “click” sound.

1 2 3 41 2 3 4

MAINTENANCE

TECHNICAL SPECIFICATIONS

The appearance and specifications are subject to change without notice.The graphics shown in the manual are schematic and it is possible that there may be minor variations on your washing machine.

Note :

MODEL

Type Semi Automatic Twin Tub

Capacity 7.2 kg

Power supply 230V, 50Hz, AC

Power input Wash 400W max, Spin 160 W max

water supply less than 1kgf/cm2 / less than 10m water head

Wash program 2

Soak function YES

Net Weight 26.5 kg

M/c Dim 810 (W) X 505 (D) X 931 (H)

- 6 -

Hydrofall 72BS

Clean the brush to get rid off residues and lints accumulated over the bristles.

Note :1. Bristle distortion might be there in the brush a . This will be resumed

before next wash.fter completion of wash cycle

2. In case of damage, please replace with new Brush available at your ONIDA Service Centre near to you.

Push the upper

part of the Brush

Insert lower part of the Brush

in the tub first and then

push thesound.

brush with “click”1 3Clean the Brush.1 2and pull in.

BRUSH

push thesound.

brush with “click”

- 7 -

OMAN :M/s Mohsin Haider Darwish, P.O.Box : 880, PC 112-RUWI, OMAN Tel :+968 24 703411 Fax :+968 24 798662

44373876

KINGDOM OF SAUDI ARABIA:M/s Said Ahmed El-Ajou Trading Corp. LLC, Tel:+966 22830923, Fax :+966 2830924

Overseas-Middle East Asia

UNITED ARAB EMIRATES : M/s Al Futtaim Electronics,DUBAI .U.A.E.Tel : +971 4 6090760 Fax: +971 4 2832590,

BAHRAIN: M/s Kewalram & Sons P. .PO Box : 84, Manama BAHRAIN Tel : +973 17 210617 Fax : 973 17 210627

KUWAIT: M/s Sefeena Gen Trading & Cont Est, P.O Box :5610, Safat: 13057 KUWAIT Tel :+9652456293 fax : +9652456297

QATAR: M/s Videohome & Electronics Centre,. PO Box : 4668,DOHA-QATAR,Tel : +974 4410060 Fax : +974

+

State Service Number

Andhra Pradesh 040-39889000

Delhi 011-39889000

GOA 022-39889000

Gujarat 079-39889000

Haryana 0172-3988900

Karnataka 080-39889000

Kerala 0484-3988900

Madhya Pradesh 0731-3988900

Maharashtra 022-39889000

Punjab 0172-3988900

Rajesthan 0141-3988900

Tamilnadu 044-39889000

Uttar Pradesh 0522-3988900

W Bengal 033-39889000

Bihar 1800 30099000

Chattisgarh 1800 30099000

Himachal Pradesh 1800 30099000

Jharkhand 1800 30099000

Orrisa 1800 30099000

Uttaranchal 1800 30099000

Assam-Guwahati 0361-2413138 / 2413158

Assam-Jorhat 0376-2309008

Jammu & Kashmir- Jammu 0191-2562258

nos.

MIRC ELECTRONICS LIMITED

MANUFACTURED & MARKETED BY :

ONIDA HOUSE, G-1, MIDC, MAHAKALI CAVES ROAD,ANDHERI (EAST), MUMBAI 400 093MADE IN INDIAwww.onida.comDESIGNED WITH YOU IN MIND