one-trip whipstock - spt · 2019. 2. 8. · spt´s whipstock can be set in vertical, directional or...
TRANSCRIPT
-
www.sptab.com | [email protected]
One-Trip Whipstock
Fast cutting of all grades of steel casing
ONE TRIP WHIPSTOCK WITH HYDRAULIC ANCHOR SYSTEM
-
Performance
Axial load (1m of anchor) 70,000kg (150,000 lbs)
Orientation MWD or Gyro
Window cutting Capable
Milling High Speed
Hydraulic anchor system sidetracks without cementingThe most advanced whipstock technology in sidetrack drilling performance. Equipped with a hydraulic anchor system, it is able to sidetrack without cementing and can be applied in cased and open hole.
Made with high performance tungsten carbide steelThe One-Trip Whipstock triple mill system is made with high performance tungsten carbide for fast cutting of all grades of steel casing. It offers the ability to drain simultaneously multiple reservoirs and can be used for new or re-entry wells.
Highly competitive and cost-effective technologySPT´s whipstock can be set in vertical, directional or horizontal wells with the possibility for direct back circulation while whipstock is running. It’s expandable profile pipe provides a reliable setting for the One-Trip Whipstock and can be set at any depth.
One-Trip WhipstockSpecifications
* Possibility to manufacture any Mill size
Operation
Setting in any depth 100%
Geometric angle 2.25° - 3.00°
Expandable profile pipe Yes
Main wellbore design All directions
Lateral wellbore design All directions
New and re-entry wells Applicable
EUROPE
Sweden (HQ)+46 (8) 590-733-10 Spain+34 (952) 179-918
Further informationContact us directly at [email protected] or www.sptab.com
AUSTRALIA
+61 (2) 4782-7548
ASIA-PACIFIC
Russia+7 (347) 216-3087
NORTH AMERICA
Canada+1 (403) 807-6364Quebec+1 (819) 824-6002Mexico+52 (662) 110-0219
SOUTH AMERICA
Argentina+54 (9) 261-623-1542Brazil+55 (31) 99625-4379Chile+56 (975) 790-336
Colombia+57 (311) 531-1609Peru+51 (962) 203-282
Casing Diameter *
Mills OD Min (in)
Mills OD Max (in)
Whip Length (m)
5’’ 4.3 4.7 8.2
5 ¾’’ 4.8 5.0 8.9
6 ⅝’’ 5.63 5.8 9.8
7’’ 6 6.25 10.5
7 ⅝’’’ 6.2 6.7 11.1
8 ⅝’’ 7.2 7.7 12.2
9 ⅝’’ 8.4 8.7 13.1
10 ¾’’ 9.0 9.7 13.7
13 ⅜’’ 12.25 12.5 19.6