omron automation americas - cs1w-at2 c200h i/o...

P78I-E-01

1

C200H I/O Terminal Block Conversion Adapter

CS1W-AT2@@Easy and secure replacement by reusing the I/O terminal block wiring

• The C200H I/O Terminal Block Conversion Adapter is aterminal block conversion adapter to reuse the terminal blockwiring of the existing C200H I/O Units as is when replacingC200H Series with CS Series.

• If you use this terminal block conversion adapter, you don'tneed to redo the I/O wiring, by which you can reduce the timefor wiring works, wiring check, and test run.

Features• The terminal blocks of existing C200H I/O Units can be reused.• The C200H terminal blocks can be directly mounted onto CS-series I/O Units.

Fixing plate(accessory)

Terminal block of C200H-series I/O Unit

to be replaced (reused)

CS1-series I/O Unit


M3✕30 screws(accessory)


Conversion adapter

Company names and product names described in this document are the trademarks or registered trademarks of their respective companies.

CS1W-AT2@@

2

Ordering InformationTerminal Block Conversion Adapter

Product name Specifications Model Standards


8-points, 10-pin type CS1W-AT201 ---



16-points, 19-pin type (for C200H-OD21A) CS1W-AT212 ---

3

CS1W-AT2@@

Connection of I/O Units and Terminal Block Conversion Adapter

*1. 24 VDC only*2.Need to add 24 VDC power supply.*3. There is a restriction to the number of mountable units.*4. The blown fuse detection bit (Bit 08) cannot be used.

*5. 12 to 24 VDC only*6.The alarm bits (Bit 08, 09, 10, and 11) cannot be used.*7.The alarm outputs cannot be used.

Note: Including models whose production are discontinued.

C200H I/O Terminal Conversion Adapter

Model

Replaced from: C200H-series I/O Units Replaced to: CS-series I/O Units

Product name Specifications Model Product name Specifications Model

CS1W-AT201

DC Input Unit 12 to 24 VDC, 8 inputs C200H-ID211 DC Input Unit 7 mA at 24 VDC, 16 inputs CS1W-ID211

AC Input Unit100 to 120 VAC, 8 inputs C200H-IA121

AC Input Unit100 to 120 VAC,100 to 120 VDC, 16 inputs

CS1W-IA111

200 to 240 VAC, 8 inputs C200H-IA221 200 to 240 VAC, 16 inputs CS1W-IA211

AC/DC Input Unit

12 to 24 VAC/VDC, 8 inputs C200H-IM211

DC Input Unit 7 mA at 24 VDC, 16 inputs

CS1W-ID211 *1

Non-voltage contacts, 8 inputs, NPN

C200H-ID001 CS1W-ID211 *2

Non-voltage contacts, 8 inputs, PNP

C200H-ID002 CS1W-ID211 *2

Interrupt Input Unit

12 to 24 VDC, 8 inputs C200HS-INT01 Interrupt Input Unit

7 mA at 24 VDC, 16 inputs CS1W-INT01 *3

Triac Output Unit

1.2 A at 250 VAC max., 8 outputs C200H-OA223Triac Output Unit

0.5 A at 250 VAC max., 16 outputs CS1W-OA211 *4

1 A at 120 VAC max., 8 outputs C200H-OA121-E0.5 A at 250 VAC max., 16 outputs

CS1W-OA211

1 A at 250 VAC max., 8 outputs C200H-OA221 CS1W-OA211 *4

Relay Output Unit

2 A at 250 VAC/24 VDC max., 8 outputs C200H-OC221

Relay Output Unit

2 A at 250 VAC/24 VDC max.,0.1 A at 120 VDC, 16 outputs CS1W-OC211

2 A at 250 VAC/24 VDC max.,independent contacts, 5 outputs C200H-OC223

2 A at 250 VAC/24 VDC max.,0.1 A at 120 VDC,independent contacts, 8 outputs

CS1W-OC201

Transistor Output Unit

1 A at 12 to 48 VDC, 8 outputs, sinking C200H-OD411


0.5 A at 12 to 24 VDC, 16 outputs

CS1W-OD211 *4 *5

2.1 A at 24 VDC, 8 outputs, sinking C200H-OD213 CS1W-OD211 *4

0.8 A at 24 VDC, 8 outputs, sourcing C200H-OD214

0.5 A at 24 VDC, 16 outputsCS1W-OD212 *6

0.3 A at 5 to 24 VDC, 8 outputs, sourcing C200H-OD216 CS1W-OD212

CS1W-AT211

DC Input Unit 24 VDC, 16 inputs C200H-ID212 DC Input Unit 7 mA at 24 VDC, 16 inputs CS1W-ID211

AC Input Unit

100 to 120 VAC, 16 inputs C200H-IA122

AC Input Unit

100 to 120 VAC,100 to 120 VDC, 16 inputs

CS1W-IA111

100 to 120 VAC, 16 inputs C200H-IA122V CS1W-IA111

200 to 240 VAC, 16 inputs C200H-IA222200 to 240 VAC, 16 inputs

CS1W-IA211

200 to 240 VAC, 16 inputs C200H-IA222V CS1W-IA211

AC/DC Input Unit 24 VAC/VDC, 16 inputs C200H-IM212 DC Input Unit 7 mA at 24 VDC, 16 inputs CS1W-ID211 *1

Relay Output Unit

2 A at 250 VAC/24 VDC max., 16 outputs C200H-OC226

Relay Output Unit

2 A at 250 VAC/24 VDC max.,0.1 A at 120 VDC, 16 outputs

CS1W-OC211

2 A at 250 VAC/24 VDC max., 16 outputs C200H-OC226N CS1W-OC211

2 A at 250 VAC/24 VDC max.,12 outputs C200H-OC222 CS1W-OC211

2 A at 250 VAC/24 VDC max.,12 outputs C200H-OC222V CS1W-OC211

2 A at 250 VAC/24 VDC max.,12 outputs C200H-OC222N CS1W-OC211

2 A at 250 VAC/24 VDC max.,16 outputs C200H-OC225 CS1W-OC211


0.3 A at 24 VDC, 12 outputs, sinking C200H-OD211


0.5 A at 12 to 24 VDC, 16 outputsCS1W-OD211

0.3 A at 24 VDC, 16 outputs, sinking C200H-OD212 CS1W-OD211

0.3 A at 5 to 24 VDC, 12 outputs, sourcing C200H-OD217 0.5 A at 24 VDC, 16 outputs CS1W-OD212

Triac Output Unit

0.8 A at 250 VAC max, 16 outputs C200H-OA225

Triac Output Unit

0.5 A at 250 VAC max.,16 outputs

CS1W-OA211

0.3 A at 250 VAC max, 12 outputs C200H-OA222 CS1W-OA211

0.3 A at 250 VAC max, 12 outputs C200H-OA222V CS1W-OA211

0.5 A at 250 VAC max, 12 outputs C200H-OA224 CS1W-OA211

CS1W-AT202 Relay Output Unit

2 A at 250 VAC/24 VDC max.,independent contacts, 8 outputs C200H-OC224

Relay Output Unit

2 A at 250 VAC/24 VDC max.,0.1 A at 120 VDC, independent contacts, 8 outputs

CS1W-OC201

2 A at 250 VAC/24 VDC max.,independent contacts, 8 outputs C200H-OC224V CS1W-OC201

2 A at 250 VAC/24 VDC max.,independent contacts, 8 outputs C200H-OC224N CS1W-OC201

CS1W-AT212 Transistor Output Unit

1 A at 24 VDC, 16 outputs, sourcing, load short-circuit protection C200H-OD21A Transistor

Output Unit0.5 A at 24 VDC,16 outputs CS1W-OD212 *7

CS1W-AT2@@

4

Installation Procedure of Terminal Block Conversion Adapter

Note: When you reuse a terminal block with wiring, confirm that there is no problem in the terminal block and wiring conditions.• The screws are securely tightened.• The cables are not damaged.• There is no rust or corrosion.• The terminal block is not damaged. (The terminal block is securely inserted and fixed.)

Step Procedure Drawing

1 Remove the terminal block from the C200H-series I/O Unit.

2Attach the fixing plate to the CS-series I/O Unit and fix it with the M3✕6 screws.The tightening torque is 0.5 to 0.67 N·m.

3

Attach the conversion adapter to the fixing plate and fix it with the M3x30 screws.The tightening torque is 0.4 to 0.48 N·m.If the tightening torque is too much, the product and screws may be damaged.

4 Attach the terminal block removed in Step 1 to the conversion adapter.

Terminal block


Fixing plate(accessory)

CS1W Unit


Conversion adapter

Terminal block

5

CS1W-AT2@@

Dimensions (Unit:mm)

120

34.5 19.8 6.544

CS1W-AT201

120

34.5 27.3 6.544CS1W-AT211CS1W-AT202CS1W-AT212

CS1W-AT2@@

6

Dimensional Difference List

Replaced to: CS-series I/O Units + Conversion adapter Replaced from: C200H-series I/O Units

CS1W-AT201

CS1W-AT211/CS1W-AT202/CS1W-AT212

34.5

164.3

144.5

100.5

120

142.2 130

(12.2)

34.5 100.5

73.5

130

34.5

171.8

144.5

100.5

120

142.2 130

(12.2)

34.5 100.5

127.5

130

7

CS1W-AT2@@

Pin Assignment

Related ManualsThe following manuals are related to the C200H Terminal Block Conversion Adapter. Use there manuals for reference.

Terminal Block Conversion Adapter Pin assignment and internal wiring

CS1W-AT201

CS1W-AT211

A0

A1

A2

A3

A4

A5

A6

A7

A8

A9

A0

A1

A2

A3

A4

A5

A6

A7

A8

A9

B0

B1

B2

B3

B4

B5

B6

B7

B8

B9

CS1-I/OC200H-I/O

A0

A1

A2

A3

A4

A5

A6

A7

A8

B0

B1

B2

B3

B4

B5

B6

B7

B8

B9

A0

A1

A2

A3

A4

A5

A6

A7

A8

A9

B0

B1

B2

B3

B4

B5

B6

B7

B8

B9

CS1-I/OC200H-I/O

Terminal Block Conversion Adapter Pin assignment and internal wiring

CS1W-AT202

CS1W-AT212

A0

A1

A2

A3

A4

A5

A6

A7

A8

B0

B1

B2

B3

B4

B5

B6

B7

B8

B9

A0

A1

A2

A3

A4

A5

A6

A7

A8

A9

B0

B1

B2

B3

B4

B5

B6

B7

B8

B9

CS1-I/OC200H-I/O

A0

A1

A2

A3

A4

A5

A6

A7

A8

B0

B1

B2

B3

B4

B5

B6

B7

B8

B9

A0

A1

A2

A3

A4

A5

A6

A7

A8

A9

B0

B1

B2

B3

B4

B5

B6

B7

B8

B9

CS1-I/OC200H-I/O

Cat. No. Manual name Description

P069-E1 C200H Replacement Guide From C200H to CS1 Refer to this guide when replacing C200H with CS1.

P070-E1 C200HS Replacement Guide From C200HS to CS1 Refer to this guide when replacing C200HS with CS1.

P071-E1 C200HX/HG/HE Replacement Guide From C200HX/HG/HE to CS1 Refer to this guide when replacing C200HX/HG/HE with CS1.

Terms and Conditions of Sale1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed

part of all quotes, agreements, purchase orders, acknowledgments, price lists,catalogs, manuals, brochures and other documents, whether electronic or inwriting, relating to the sale of products or services (collectively, the "Products")by Omron Electronics LLC and its subsidiary companies (“Omron”). Omronobjects to any terms or conditions proposed in Buyer’s purchase order or otherdocuments which are inconsistent with, or in addition to, these Terms.

2. Prices; Payment Terms. All prices stated are current, subject to change with-out notice by Omron. Omron reserves the right to increase or decrease priceson any unshipped portions of outstanding orders. Payments for Products aredue net 30 days unless otherwise stated in the invoice.

3. Discounts. Cash discounts, if any, will apply only on the net amount of invoicessent to Buyer after deducting transportation charges, taxes and duties, and willbe allowed only if (i) the invoice is paid according to Omron’s payment termsand (ii) Buyer has no past due amounts.

4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month orthe maximum legal rate, whichever is less, on any balance not paid within thestated terms.

5. Orders. Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all

costs involved in, obtaining any government approvals required for the impor-tation or sale of the Products.

7. Taxes. All taxes, duties and other governmental charges (other than generalreal property and income taxes), including any interest or penalties thereon,imposed directly or indirectly on Omron or required to be collected directly orindirectly by Omron for the manufacture, production, sale, delivery, importa-tion, consumption or use of the Products sold hereunder (including customsduties and sales, excise, use, turnover and license taxes) shall be charged toand remitted by Buyer to Omron.

8. Financial. If the financial position of Buyer at any time becomes unsatisfactoryto Omron, Omron reserves the right to stop shipments or require satisfactorysecurity or payment in advance. If Buyer fails to make payment or otherwisecomply with these Terms or any related agreement, Omron may (without liabil-ity and in addition to other remedies) cancel any unshipped portion of Prod-ucts sold hereunder and stop any Products in transit until Buyer pays allamounts, including amounts payable hereunder, whether or not then due,which are owing to it by Buyer. Buyer shall in any event remain liable for allunpaid accounts.

9. Cancellation; Etc. Orders are not subject to rescheduling or cancellationunless Buyer indemnifies Omron against all related costs or expenses.

10. Force Majeure. Omron shall not be liable for any delay or failure in deliveryresulting from causes beyond its control, including earthquakes, fires, floods,strikes or other labor disputes, shortage of labor or materials, accidents tomachinery, acts of sabotage, riots, delay in or lack of transportation or therequirements of any government authority.

11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship

except in “break down” situations.b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall

constitute delivery to Buyer;c. All sales and shipments of Products shall be FOB shipping point (unless oth-

erwise stated in writing by Omron), at which point title and risk of loss shallpass from Omron to Buyer; provided that Omron shall retain a security inter-est in the Products until the full purchase price is paid;

d. Delivery and shipping dates are estimates only; ande. Omron will package Products as it deems proper for protection against nor-

mal handling and extra charges apply to special conditions.12. Claims. Any claim by Buyer against Omron for shortage or damage to the

Products occurring before delivery to the carrier must be presented in writingto Omron within 30 days of receipt of shipment and include the original trans-portation bill signed by the carrier noting that the carrier received the Productsfrom Omron in the condition claimed.

13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that theProducts will be free from defects in materials and workmanship for a period oftwelve months from the date of sale by Omron (or such other period expressedin writing by Omron). Omron disclaims all other warranties, express or implied.(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-

ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THEPRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIRINTENDED USE. Omron further disclaims all warranties and responsibility ofany type for claims or expenses based on infringement by the Products or oth-erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-gation hereunder shall be, at Omron’s election, to (i) replace (in the formoriginally shipped with Buyer responsible for labor charges for removal orreplacement thereof) the non-complying Product, (ii) repair the non-complyingProduct, or (iii) repay or credit Buyer an amount equal to the purchase price ofthe non-complying Product; provided that in no event shall Omron be responsi-ble for warranty, repair, indemnity or any other claims or expenses regardingthe Products unless Omron’s analysis confirms that the Products were prop-erly handled, stored, installed and maintained and not subject to contamina-tion, abuse, misuse or inappropriate modification. Return of any Products byBuyer must be approved in writing by Omron before shipment. Omron Compa-nies shall not be liable for the suitability or unsuitability or the results from theuse of Products in combination with any electrical or electronic components,circuits, system assemblies or any other materials or substances or environ-ments. Any advice, recommendations or information given orally or in writing,are not to be construed as an amendment or addition to the above warranty.See http://www.omron247.com or contact your Omron representative for pub-lished information.

14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLEFOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANYWAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM ISBASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.Further, in no event shall liability of Omron Companies exceed the individualprice of the Product on which liability is asserted.

15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies andtheir employees from and against all liabilities, losses, claims, costs andexpenses (including attorney's fees and expenses) related to any claim, inves-tigation, litigation or proceeding (whether or not Omron is a party) which arisesor is alleged to arise from Buyer's acts or omissions under these Terms or inany way with respect to the Products. Without limiting the foregoing, Buyer (atits own expense) shall indemnify and hold harmless Omron and defend or set-tle any action brought against such Companies to the extent based on a claimthat any Product made to Buyer specifications infringed intellectual propertyrights of another party.

16. Property; Confidentiality. Any intellectual property in the Products is the exclu-sive property of Omron Companies and Buyer shall not attempt to duplicate itin any way without the written permission of Omron. Notwithstanding anycharges to Buyer for engineering or tooling, all engineering and tooling shallremain the exclusive property of Omron. All information and materials suppliedby Omron to Buyer relating to the Products are confidential and proprietary,and Buyer shall limit distribution thereof to its trusted employees and strictlyprevent disclosure to any third party.

17. Export Controls. Buyer shall comply with all applicable laws, regulations andlicenses regarding (i) export of products or information; (iii) sale of products to“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens ofregulated technology or information.

18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any rightand no course of dealing between Buyer and Omron shall operate as a waiverof rights by Omron. (b) Assignment. Buyer may not assign its rights hereunderwithout Omron's written consent. (c) Law. These Terms are governed by thelaw of the jurisdiction of the home office of the Omron company from whichBuyer is purchasing the Products (without regard to conflict of law princi-ples). (d) Amendment. These Terms constitute the entire agreement betweenBuyer and Omron relating to the Products, and no provision may be changedor waived unless in writing signed by the parties. (e) Severability. If any provi-sion hereof is rendered ineffective or invalid, such provision shall not invalidateany other provision. (f) Setoff. Buyer shall have no right to set off any amountsagainst the amount owing in respect of this invoice. (g) Definitions. As usedherein, “including” means “including without limitation”; and “Omron Compa-nies” (or similar words) mean Omron Corporation and any direct or indirectsubsidiary or affiliate thereof.

Certain Precautions on Specifications and Use1. Suitability of Use. Omron Companies shall not be responsible for conformity

with any standards, codes or regulations which apply to the combination of theProduct in the Buyer’s application or use of the Product. At Buyer’s request,Omron will provide applicable third party certification documents identifyingratings and limitations of use which apply to the Product. This information byitself is not sufficient for a complete determination of the suitability of the Prod-uct in combination with the end product, machine, system, or other applicationor use. Buyer shall be solely responsible for determining appropriateness ofthe particular Product with respect to Buyer’s application, product or system.Buyer shall take application responsibility in all cases but the following is anon-exhaustive list of applications for which particular attention must be given:(i) Outdoor use, uses involving potential chemical contamination or electricalinterference, or conditions or uses not described in this document.(ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviationsystems, medical equipment, amusement machines, vehicles, safety equip-ment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or prop-erty. Please know and observe all prohibitions of use applicable to this Prod-uct. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUSRISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUTENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO

ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THEOVERALL EQUIPMENT OR SYSTEM.

2. Programmable Products. Omron Companies shall not be responsible for theuser’s programming of a programmable Product, or any consequence thereof.

3. Performance Data. Data presented in Omron Company websites, catalogsand other materials is provided as a guide for the user in determining suitabil-ity and does not constitute a warranty. It may represent the result of Omron’stest conditions, and the user must correlate it to actual application require-ments. Actual performance is subject to the Omron’s Warranty and Limitationsof Liability.

4. Change in Specifications. Product specifications and accessories may bechanged at any time based on improvements and other reasons. It is our prac-tice to change part numbers when published ratings or features are changed,or when significant construction changes are made. However, some specifica-tions of the Product may be changed without any notice. When in doubt, spe-cial part numbers may be assigned to fix or establish key specifications foryour application. Please consult with your Omron’s representative at any timeto confirm actual specifications of purchased Product.

5. Errors and Omissions. Information presented by Omron Companies has beenchecked and is believed to be accurate; however, no responsibility is assumedfor clerical, typographical or proofreading errors or omissions.

OMRON CANADA, INC. • HEAD OFFICEToronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com

OMRON ELECTRONICS DE MEXICO • HEAD OFFICEMéxico DF • 52.55.59.01.43.00 • 01-800-226-6766 • [email protected]

OMRON ELECTRONICS DE MEXICO • SALES OFFICEApodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • [email protected]

OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICESão Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br

OMRON ARGENTINA • SALES OFFICECono Sur • 54.11.4783.5300

OMRON CHILE • SALES OFFICESantiago • 56.9.9917.3920

OTHER OMRON LATIN AMERICA SALES54.11.4783.5300

Authorized Distributor:

P78I-E-01 10/15 Note: Specifications are subject to change. © 2015 Omron Electronics LLC Printed in U.S.A.

Printed on recycled paper.

Automation Control Systems• Machine Automation Controllers (MAC) • Programmable Controllers (PLC) • Operator interfaces (HMI) • Distributed I/O • Software

Drives & Motion Controls • Servo & AC Drives • Motion Controllers & Encoders

Temperature & Process Controllers • Single and Multi-loop Controllers

Sensors & Vision• Proximity Sensors • Photoelectric Sensors • Fiber-Optic Sensors• Amplified Photomicrosensors • Measurement Sensors• Ultrasonic Sensors • Vision Sensors

Industrial Components • RFID/Code Readers • Relays • Pushbuttons & Indicators• Limit and Basic Switches • Timers • Counters • Metering Devices • Power Supplies

Safety • Laser Scanners • Safety Mats • Edges and Bumpers • Programmable Safety

Controllers • Light Curtains • Safety Relays • Safety Interlock Switches

OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com

OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu

omron automation americas - cs1w-at2 c200h i/o...

Documents