omni one -s, -p, and -sp · input: 100-240 vac, 50-60 hz, 1.5a max. output: 12vdc 5a max. barcode...
TRANSCRIPT
Omni One-S, -P, and -SP
US
ER M
ANU
ALO
mni O
ne-S, -P and -SP
for iPad Air®2 , iPad® Pro 9.7” and iPad G5
Page 2
CONTACT INFORMATION
Mobility Sales/Technical Support Center
Infinite Peripherals, Inc.17681 Mitchell NIrvine, CA 92614Toll Free: (866) 278-7860Office: (949) 222-0300
Headquarters/ Main Warehouse
Infinite Peripherals, Inc.2312 Touhy Ave.Elk Grove Village, IL 60007Toll Free: (800) 278-7860Office: (847) 818-1260Fax: (847) 818-1287
Email: [email protected]: ipcmobile.com
Note: iOS device and other items shown sold separately.
Page 3
Contents
CONTACT INFORMATION .................................................................................................................... 2
LEGAL NOTICE .......................................................................................................................................4
COMPATIBILITY ......................................................................................................................................4
TRADEMARK CREDITS .........................................................................................................................4
WARNINGS, CAUTIONS AND NOTES ............................................................................................... 5
GUIDELINES FOR USE .......................................................................................................................... 5
General Warnings and Cautions ...................................................................................................................................5
GETTING STARTED ...............................................................................................................................6
Before Using Your Omni One .........................................................................................................................................6
DEVELOPING APPLICATIONS ............................................................................................................ 7
INFINEA OMNI ONE FEATURES .........................................................................................................8
ACCESSORIES ........................................................................................................................................8
PRODUCT OVERVIEW .........................................................................................................................9
ASSEMBLING THE OMNI ONE .......................................................................................................... 10
Inserting the Tablet (All models) ..........................................................................................................................10
Inserting the Payment Device (Omni One-P and Omni One-SP models only)......................................... 13
ATTACHING PERIPHERAL DEVICES ................................................................................................17
USB Connector ................................................................................................................................................................. 17
Serial Connector .............................................................................................................................................................. 17
POWERING ON THE INFINEA OMNI ONE ......................................................................................18
Power Connector ............................................................................................................................................................. 18
TROUBLESHOOTING .......................................................................................................................... 19
TECHNICAL DATA............................................................................................................................... 20
Omni One - S (Scan Only) ...........................................................................................................................................20
Omni One - P (Payment Only) .................................................................................................................................... 21
Omni One - SP (Scan and Payment) ........................................................................................................................ 22
WARRANTY ..........................................................................................................................................23
DISCLAIMER..........................................................................................................................................23
PRODUCT RETURNS AND SERVICING ...........................................................................................24
To Request an RMA ........................................................................................................................................................ 24
SYMBOLS FOR USE .............................................................................................................................25
FEDERAL COMMUNICATIONS COMMISSION ...............................................................................26
Federal Communications Commission (FCC) Statement ................................................................................ 26
FCC RF Radiation Exposure Statement .................................................................................................................. 26
UM-00027 Vers.A
Page 4
LEGAL NOTICE
“Made for iPad” means that an electronic accessory has been designed to connect specifically to the iPad and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with the iPad may affect wireless performance.
COMPATIBILITY
Made for:
iPad® Air 2
iPad® Pro 9.7
iPad® Pro G5
TRADEMARK CREDITS
Lightning™ is a trademark of Apple, Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Apple is under license.
Page 5
WARNINGS, CAUTIONS AND NOTES
Please observe the Warnings, Cautions and Notes presented throughout this manual. An explanation of these items is provided below:
Symbol Description
Warning Actions may result in a serious outcome (e.g., injury, death or other adverse affect) to the user.
Caution Special care is required to avoid damage to the product or other property.
Note Important points and tips about the product are being provided.
GUIDELINES FOR USE
General Warnings and Cautions• This device is intended for indoor use only. Keep away from direct sunlight
and rain.
• To prevent risk of shock or damage, do not use while wet or while located directly next to water sources.
• Avoid exposing the Omni One to excessive heat. Keep the device away from heat radiating equipment, open flame, etc.
• Do not clean the device using caustic chemicals or oils.
• Do not use the device near electrical appliances or during electrical storms.
Page 6
GETTING STARTED
Before Using Your Omni One• Remove the Omni One kiosk unit from the shipping carton and retain the
packing materials, invoice, and bill of lading. These may be required to return the device for servicing later, or to process a claim with the carrier.
• Carefully inspect the packaging and contents for any signs of damage. If this evidence of damage, DO NOT attempt to use the unit. Notify your account executive or contact Infinite Peripherals technical support at [email protected].
The following table will help you get the Omni One ready for use:
Step PurposeAdditional
Information
Install the Tablet
Connecting the Omni One with the iPad.
See manual section: ASSEMBLING THE OMNI ONE
Install Software
Use of the Barcode Scanner and/or accessory payment device requires the installation of software on your iPad.
See manual section: DEVELOPING APPLICATIONS
Install Perhiperhal Devices
Use of the Barcode Scanner and/or accessory payment device requires the installation of software on your iPad.
See manual section: ATTACHING PERHIPERAL DEVICES
Power On the Omni One
Initialize scanner and payment features.
See manual section: POWERING ON THE OMNI ONE
Page 7
DEVELOPING APPLICATIONS
Software is not provided with your Omni One. Please contact your reseller or Infinite Peripherals for Third Party software solutions.
Integrating the Omni One into your iOS application requires the use of the Infinite Peripherals Universal SDK. The SDK incorporates an API specifically for developing applications to use barcode scanning and payment functionality of the Omni One.
For additional details on using our Universal SDK, please refer to the SDKs documentation.
For the latest Universal SDK please visit our developer portal at:
https://developer.ipcmobile.com
Page 8
OMNI ONE FEATURES
The Omni One offers advanced security, power and performance in a sleek, stylish and ergonomic kiosk design.
Feature Description
2D Barcode Scanner
The Omni One supports one-dimensional (1D) and two-dimensional (2D) barcode symbols, which can be read in any direction (omni-directional). The effective reading distance of the barcode reader varies depending on the barcode size. The barcode scanner is capable of reading barcodes on an LCD screen.
I/O Connectors Mini USB
Bluetooth Supports iAP and Serial Port Profile (SPP)
ACCESSORIES
Please visit our website at www.ipcmobile.com, or contact your Infinite Peripherals account representative, for additional information about our current and future product accessory offerings.
Page 9
PRODUCT OVERVIEW
*Some features may not be available on Scan only or Payment only models.
*Payment Device Module Enclosure
iPad Enclosure
*Barcode Scanner
*Barcode ScannerSerial Port
USB Port DC Jack Port
Page 10
ASSEMBLING THE OMNI ONE
Inserting the Tablet (All models)
1. Place the Omni One face down on a smooth, flat surface.
2. Remove the four (4) corner screws from the base unit using a Torx T20 screwdriver. Place the screws in a secure area.
3. Turn the unit over (face up) and detach the faceplate by gently pulling the top piece up away from the base and sliding it to the left to unlock.
Page 11
4. Insert the tablet into the base, by sliding the it onto the Lightning™ connector until it clicks into place.
10
° M
AX
5. Place the top cover back onto the base of the unit and slide it to the right to lock it back into place.
Page 12
6. Turn the unit over and insert the four (4) corner screws on the base. Secure them in place using the T20 screwdriver.
Page 13
Inserting the Payment Device (Omni One-P and Omni One-SP models only)
1. Using a Torx T8 screwdriver, remove the four (4) corner screws from the back side of the payment device enclosure and place them in a secure area.
2. Turn the unit over and gently pull the faceplate away from the base of the enclosure.
Page 14
3. Insert your payment device into the base of the enclosure and attach the mini USB cable into the USB port.
4. Verify that the cable is sitting properly in the channel before closing the unit.
Page 15
5. Reattach the faceplate onto the base of the unit, starting from the bottom of the enclosure.
6. Insert the tab on the bottom edge of the faceplate into the base of the enclosure.
7. Turn the unit over and insert the four (4) corner screws into the base using the T8 screwdriver.
Page 16
Page 17
ATTACHING PERIPHERAL DEVICES
Suitable peripheral devices can be attached to the Omni One using one of the auxiliary ports on the back of the device, as shown in the figure below.
Serial Interface
USB Interface
Attach peripheral devices on the unit before connecting power.
USB Connector 1. Plug the USB cable into the USB interface on the back of the Omni One
unit.
2. Connect the other end of the USB cable to a suitable peripheral device.
Serial Connector 1. Orient the serial interface cable properly and insert it into the serial
interface connector on the back of the Omni One unit.
2. Secure the cable terminal by fastening the connector with the screws.
3. Connect the other end of the interface cable to a suitable peripheral device.
Refer to the specifications in the Technical Data section for additional information and auxiliary port specification.
Page 18
POWERING ON THE OMNI ONE
Power Connector 1. Plug the power cable connector on your power adapter into the DC
Jack Port on the back of the Omni One.
2. Connect the AC power cord plug into a suitable wall outlet.
3. Once the Tablet has been installed and the power supply has been connected, your Omni One will automatically power on.
Refer to the Input Power specifications in the Technical Data table in this manual for additional information.
Power Cord
Power Cable Connector
DC Jack Port
AC Adapter
AC Adapter Cord
Page 19
TROUBLESHOOTING
The troubleshooting guidelines provided in the following section are included to assist in the successful installation and configuration of your Omni One unit. If you are having problems the Omni One, first verify that there is power to the unit and that it is powered on and sufficiently charged.
See section titled POWERING ON THE OMNI ONE for additional information on supplying power to the unit.
Once power and proper battery charge has been confirmed, please review the appropriate sections below for additional troubleshooting options. If the problem persists or the problem is not described below, contact technical support at [email protected]. Your unit may need to be returned for servicing.
Troubleshooting > Scanner
If the Omni One is not scanning barcodes properly, refer to the table below for additional troubleshooting options:
Problem Possible Cause
Scanner does not turn on
• Power supply is not properly connected to the unit.
• Omni One is not being powered on by software.
• Scan engine is faulty.
No barcode data is being returned during scanning
• Barcode cannot be read.
• Software is not decoding properly.
Scanner beep is not audible • Sound mode is not enabled.
Unable to scan some barcodes • Barcode type is not enabled/supported.
Page 20
TECHNICAL DATA
Omni One - S (Scan Only)
MECHANICAL
Compatibility• Tablet Air 2 with iOS 8 or later• Tablet Pro 9.7” with iOS 9 or later• Tablet G5 with iOS 10 or later
Dimensions(L) x (W) x (H)
Omni One with iPad Air 2 or iPad Pro 9.7”290mm x 200.1mm x 43.4mm (11.4” x 7.9” x 1.7”)
Omni One with iPad G5 290mm x 200.1mm x 43.4mm (11.4” x 7.9” x 1.76”)
Weight (without Tablet) 1089g (2.4 lbs)
Orientation Landscape Only
Mounting Pattern VESA 75mm
ELECTRICAL
Power SupplyAC AdapterInput: 100-240 VAC, 50-60 Hz, 1.5A max.Output: 12Vdc 5A max.
Barcode Scanner 2D high speed imager (supports all major 1D or 2D barcodes)
Ports
Auxiliary USB Port - Type A Power:
- 5V 0.5A Profiles:
- Serial over USB - HID Keyboard
Auxiliary Serial Port - RS232 (DB9)Baud Rate:- 15200,N,8,1- 9600,N,8,1
Emulation - ESC/POS
CERTIFICATIONS
UL, FCC, CE, cUL, CCC, RCM, NOM, RoHS
ENVIRONMENT
TemperatureOperation: 0°C to +35°C (32°F to 95°F)
Storage: -10°C to 45°C (14°F to +113°F)
HumidityOperation: 5 to 95% RH
Storage: 5 to 95% RH
Page 21
Omni One - P (Payment Only)
MECHANICAL
Tablet Compatibility• Tablet Air 2 with iOS 8 or later• Tablet Pro 9.7” with iOS 9 or later• Tablet G5 with iOS 10 or later
Payment Device Compatibility • Infinea Bluepad
Dimensions(L) x (W) x (H)
Omni One with iPad Air 2 or iPad Pro 9.7” 393mm x 193.5mm x 43.4mm (15.5” x 7.6” x 1.7”)
Omni One with iPad G5 393mm x 193.5mm x 44.8mm (11.4” x 7.9” x 1.76”)
Weight (without Tablet) 1293g (2.85 lbs)
Orientation Landscape Only
Mounting Pattern VESA 75mm
ELECTRICAL
Power SupplyAC AdapterInput: 100-240 VAC, 50-60 Hz, 1.5A max.Output: 12Vdc 5A max.
Ports
Auxiliary USB Port - Type A Power:
- 5V 0.5A Profiles:
- Serial over USB - HID Keyboard
Auxiliary Serial Port - RS232 (DB9)Baud Rate:- 15200,N,8,1- 9600,N,8,1
Emulation - ESC/POS
CERTIFICATIONS
UL, FCC, CE, cUL, CCC, RCM, NOM, RoHS
ENVIRONMENT
TemperatureOperation: 0°C to +35°C (32°F to 95°F)
Storage: -10°C to 40°C (14°F to +104°F)
HumidityOperation: 5 to 95% RH
Storage: 5 to 95% RH
Page 22
Omni One - SP (Scan and Payment)
MECHANICAL
Tablet Compatibility• Tablet Air 2 with iOS 8 or later• Tablet Pro 9.7” with iOS 9 or later• Tablet G5 with iOS 10 or later
Payment Device Compatibility • Infinea Bluepad
Dimensions(L) x (W) x (H)
Omni One with iPad Air 2 or iPad Pro 9.7” 393mm x 193.5mm x 43.4mm (15.5” x 7.6” x 1.7”)
Omni One with iPad G5 393mm x 193.5mm x 44.8mm (11.4” x 7.9” x 1.76”)
Weight (without Tablet) 1338g (2.95lbs) without Tablet
Orientation Landscape Only
Mounting Pattern VESA 75mm
ELECTRICAL
Power SupplyAC AdapterInput: 100-240 VAC, 50-60 Hz, 1.5A max.Output: 12Vdc 5A max.
Barcode Scanner 2D high speed imager (supports all major 1D or 2D barcodes)
Ports
Auxiliary USB Port - Type A Power:
- 5V 0.5A Profiles:
- Serial over USB - HID Keyboard
Auxiliary Serial Port - RS232 (DB9)Baud Rate:- 15200,N,8,1- 9600,N,8,1
Emulation - ESC/POS
CERTIFICATIONS
UL, FCC, CE, cUL, CCC, RCM, NOM, RoHS
ENVIRONMENT
TemperatureOperation: 0°C to +35°C (32°F to 95°F)
Storage: -10°C to 40°C (14°F to +104°F)
HumidityOperation: 5% to 95% RH
Storage: 5% to 95% RH
Page 23
WARRANTY
Infinite Peripherals does not warrant, and is not responsible for, any damage to the Omni One (“Product”) or the assembled iOS device as a result of liquid or solid particle intrusion into the Product, or damaged caused by dropping the Product with the assembled iOS device. If a material or workmanship defect arises with regard to any Infinite Peripherals product, and a valid claim is received within the Warranty Period, Infinite Peripherals (at Infinite Peripherals’ sole discretion) will (1) repair the Product using new or refurbished parts, or (2) replace the Product with a new or refurbished Product.
For purposes of this limited warranty, “refurbished” means a product or part that has been substantially returned to its original specifications. In the event of a defect, these are your exclusive remedies.
DISCLAIMER
NO WARRANTY. This technical documentation is provided AS-IS. Further, the documentation does not represent a commitment on the part of Infinite Peripherals, Inc., and does not warrant that it is accurate, complete or error free. Any use of the technical documentation is at the risk of the user. Infinite Peripherals, Inc. reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Infinite Peripherals, Inc. to determine whether any such changes have been made. Infinite Peripherals, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. Infinite Peripherals, Inc. does not assume any product liability arising out of, or in connection with, the application or use of any product or application described herein.
Page 24
PRODUCT RETURNS AND SERVICING
Visit our online support center at http://ipcmobile.com/support/rma-support.html
Use the link provided to create an account and gain access to our Knowledge Base and online support services. Through our online support center, you’ll be able to download files, open a Support Ticket, manage your RMAs, view your account Profile and subscribe to Alerts.
To Request a RMA1. Create a user account in the RMA Support Portal at http://ipcmobile.
com/support/rma-support.html
2. Login to your user account and click the “Create RMA Request” option. Note: A user account must be established to access this feature.
3. Read the instructions provided and complete the online request form.
4. Note the assigned RMA number and write it clearly on your shipping carton.
5. Ship your equipment back to us at the address provided.
Page 25
SYMBOLS FOR USE
The following symbols may be found throughout this document, or on the Omni One or its packaging, and are defined below:
Symbol Definition
Consult Instructions for Use
Waste Electrical and Electric Equipment
Mark of conformity to European Union Directives
UL Certified
Australia Regulatory Compliance Mark
Page 26
FEDERAL COMMUNICATIONS COMMISSION
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
15.105(a)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.