Ology™ Boundary Screen

888.STEELCASE (888.783.3522)

www.steelcase.com

© 2019 Steelcase Inc. Grand Rapids, MI 49501 U.S.A.

®

Page 1 of 41360035001 Rev A

T30

#2 SQUARE

5/32”

®

Page 2 of 41360035001 Rev A

Dual SidedSingle Sided

Assemble Mounting Bracket

1) Using (3) M6 button head thread forming screws (provided)attach the mounting bracket to underside of cross-tubeweldment.

TIP: Note hole positions used on single sided (see arrows),centered on dual sided applications.

2a) Use a level to check for vertical orientation. 2b) Loosen(6) button head screws using a 5/32" allen wrench, 2c) adjustthe interface bracket to vertical and 2d) retighten (6) buttonhead screws.

2a2d

2b

2c

5/32”.472"

(12mm)

3x

1

®

Page 3 of 41360035001 Rev A

1” minimum

Attach the Boundary Screen

3a) Position boundary screen against bracket and check foralignment of the pilot holes (6X), 3b) adjust the screen levelerglides, if necessary, to match the pilot hole pattern to slots inbracket, 3c) secure using (6X) #10-12 x .625 screws (provided).

TIP: Check screen for 1” minimum gap clearance and alignmentto work surface top. If necessary, loosen screws from Step 1,make adjustment to screen position, then retighten screws securely.

3c 3b 3a

®

Page 4 of 41360035001 Rev A

Install Trim

4c4b4a

4a) Flex sides of trim cover open to overlap mounting bracket.4b) engage “V-tabs” to slots, then 4c) push cover tight toboundary screen.