CASE IHWorks with all post-2000 models,

especially suited for cold-climates and long oil change intervals (500-600 hours)

For all models from the series: AVJ, CS, CS Pro, CVX, CX,

David Brown/Case, DT, DX, Hydra Shift, JX, LRX, Magnum III and MX III, Maxxima JX and

JXU, Maxxum (MXN, MXU and Multicontroller), MX, PJ, PJN, PJV, Puma, Puma, CVX,

Quantum, Steiger & Quadtrac (300, 400, 500, STX), Synchro, Turbo Special and VJ

For all tractors and gardening machinery from the series 1000,

2000, 3000, 4000, 5000, 6000, 7000, 8000 and 9000

from the years 1981-2001

DEUTZ-FAHR

For all models 30, 40, 50, 60, 70, 80, 90,100, 200, D, DX, F, IN-trac, K, M, TTV

and others, from the series: Agrocompact, Agrofarm, Agrokid,

Agrolux, Agroplus, Agroprima, Agrostar, Agrotract, Agrotron and Natural Power

For all models from 1995 to 2005

For all models from 1980 to 1999

Works with all post-2008 models, especially suited for cold-climates and

long oil change intervals (500-600 hours)

FENDT

For all models 100, 200, 300, 400, 500, 600, 700, 800, 819-828, 820, 900, F200GT, F300

(GT, GTA, GTF, GTH and GTM from 1975 and GHA from 1990) and others, from the series:

Farmer 200, Farmer 300, Favorit, Municipal, Vario and Xylon

For all models 100, 200, 300, 400, 500, 600, 700, 800, 819-828, 820,

900, F200GT, F300 (GT, GTA, GTF, GTH and GTM from 1975 and GHA from 1990) and others, from the series: Farmer 200, Farmer 300, Favorit, Municipal,

Vario and Xylon

Works with all post-2000 models, especially suited for cold-climates and

long oil change intervals (500-600 hours)

JOHN DEERE

For all 2002-2007 models, including garden and vineyard tractors from 100F

series, and tractors and gardening machinery from the 1000,

2000, 3000, 4000, 5000, 6000, 7000, 8000 and 9000 series

For all post-2008 models, including garden and vineyard tractors from 100F

series, and tractors and gardening machinery from the 1000, 2000, 3000,

4000, 5000, 6000, 7000, 8000, 9000, 5, 8R, 8RT, 20 and Millennium series

LAMBORGHINI

For all models Agile, Club, Crono, Evo, F Plus, Fruit Farm, Gamma, Grand Prix, High Profile, Low, Premium, Runner, Runner Jet, Runner Heavy Duty, Sprint, Target, Turbo GP, Twin System, Victory and Plus 2000 to

2008 except in which one’s ACEA E4 lubricants are expressly recommended

For all 1984-1999 models for oil change intervals of 150-200 hours

For all Euro 3 engines from the C, CF, CV, R1, R2, R3, R6, R7, R8, Reckord, RF, RF 80,

RF 90, RF 100, RS 70, RS 75, RS 90, RV 75, RV 90 and RV 100 series.

Alternative Recommendation: AVEROIL UHP 10W40 ACEA E4, for long oil change

intervals (500-600 hours)

LANDINIFor all models Alpine, Landpower, Mistral,

Powerfarm, Powerlift, Powermaster, Powermax, Powermondial, Powervision,

Rex, Technofarm, Trekker and Vision

For all 1991-2005 models for oil change intervals of 150-200

hours

For all Euro 3 engines from the R2, R3, R6, R7, RF 80, RF 90, RF 100, RS 70, RS 75, RS 90,

RV 75, RV 90 and RV 100 series Alternative Recommendation: AVEROIL UHP 10W40 ACEA E4, for long oil change

intervals (500-600 hours)

CLAASWorks with all post-2004 models,

especially suited for cold-climates and long oil change intervals (500-600 hours)

For all tractors from the series: Ares, Ares 500, Arion, Atles, Axion, Axos, Hexashift, Nectis, Quadrishift, Scorpion

and Xerion; balers from the series Quadrant, Rolland and Variant;

telehandler Scorpion

Tractors Motor Oil

AVEROIL GLOBAL 15W30/10W40/15W40

AVEROIL FAP15W40

AVEROIL TIR 15W40

The latest technologies applied to the engine world make it increasingly hard to choose the right lubricant for each vehicle.That's why, OLIPES has developed this catalog-handbook for mechanics and farming professionals. The catalog is designed and organized for use as a lubricant quick-guide, allowing you to choose the right motor oil for every situation and to help mechanics to present the technical information that they need to give the right advice to their customers.All the major manufacturers of Agricultural Machinery from Europe, the United States and Asia have their own specifications for a new generation of motor oils. This in addition to the new API and ACEA specifications, must be complied in the testing demands laid out by each manufacturer. In this catalog, we present the specifications for each manufacturer along with the recommended lubricant for each model, presented within easy-to-read tables.

MASSEY FERGUSONWorks with all post-2001 models,

good for long oil change intervals (500-600 hours)

For all 1979-2000 models, oil changes interval of 250 hours. Alternative

Recommendation: MAXITRACTOR 15W40, for oil change intervals of

150-200 hours.

NEW HOLLANDFIATAGRI-FORD

Works with all post-2004 models, good for long oil change intervals (500-600 hours)

For all models from the T3000, T4000 (Deluxe, F, N, Standard, V), T5000, T6000 (Delta, Elite, Grande, Plus, SWB) T7000 (Auto Command, Power Command),

T7500, TD5000, TK4000 series and models from the TCE, TD, TG, TJ, TL, TM, TN, TS, TVT

and TW series

For all 1984-2000 models, for oil change intervals of 150-200 hours

RENAULTWorks with all post-2003 models,

good for long oil change intervals (500-600 hours)

To get better performance from Euro 5 and Euro 6 engines, we recommend using ACEA E6 motor oil: AVEROIL UHP 10W40 and AVEROIL UHP 5W30

For all post-2000 models, especially from the Ares, Atles, Celtis, Ceres, Cergos,

Ergos, Fructus/Dionis, Herdsman, Hydro, Nectra, Pales and Temis series

For all 1984-2000 models from the Cergos, Fructus/Dionis, Herdsman, LS, MX, PX, RM, RS, RX, S, SP, Temis, TL, TS,

TX, TZ series, oil change intervals of 100-200 hours

SAME

Works with all post-2004 models, specifically from the Diamond,

Dorado (GS, High-Line, LS) Explorer 3 (GS, LS) series, good for long oil change intervals (500-600

hours)

For all models from the Agromash, Antares I and II, Antares Top, Argon, Argon Classic,

Aster, Delfino, Diamond II, Dorado (B, Inversore, S, V), Explorer, Explorer 3, Frutteto, Frutteto 3, Golden, Golden Compactto, Iron, Silver-Medium, R4,

Ranger, Row Cop, Rubin, Tiger, Titan, Titan Supertitan and Vigneron series

For all 1978-2004 models and models from the Centauro, Centurion,

Condor, Explorer (65, 65L, 75) Galaxy, Jaguar, Laser, Leopard, Minitaurus, Trident series, oil change intervals of

100-200 hours.

For all models from 2001 from the MF 50 Handler, MF 152, 154, 158, 174, 184, 230,

240, 275, 290, 298, 340, 342, 354, 355, 410, 415, 420, 460, 595, 650, 660, 675, 680, 698T,

699, MF 1000, 1200, 1500, MF 2000, MF 3400C, 3600, 3600VSF, MF 4400, MF 5400,

MF 6400, MF 7400, MF 8600, MF 9240 series and previous

AVEROIL GLOBAL 15W30/10W40/15W40

AVEROIL FAP15W40

AVEROIL TIR 15W40

CASE IH

DEUTZ-FAHR

FENDT

JOHN DEERE

MASSEY FERGUSON

NEW HOLLANDFIATAGRI-FORD

CLAAS

Combine Harvesters and Hay Balers

Lubricantsfor

Works with all post-2006 models, especially suited for cold-climates and

long oil change intervals (500-600 hours or 36 months)

For models 2300 X-Clusive Axial Flow, 2365, 2366, 2388, AFX 8010 Axial Flow,

Axial Flow (7120, 8120, 9010 and 9120), CF 80 and CT (5050, 5060, 5070 and 5080) for long oil change intervals (500 hours or 36

months)

For models 521, 525H, 525M, 527, 1640, 1660, 1680, 2166, 2188 and Arcus 2500 for

oil change intervals up to 240 hours

The 1985-1994 models use STOU motor oils with oil change intervals of up to

150 hours

Works for all models with Euro 3 engines from the 56, 56 Baureihen series long oil

change intervals (500-600 hours)

For all models from4000, 54 Baureihen, 55, AX 7500 and

Top Liner series

For models M (33.60/34.80/35.40/35.70/35.75/35.78H/35.80H/35.80M/

36.10H/36.30H/36.30HS/36.40H/40.30/40.40/40.45H), M 660, M 980, M 1080, M 1322 H, M 1610 H, M 2385, M 2480, M 2580, M

2680, M 2685

Works with all post-2000 models, especially suited for cold-climates and

long oil change intervals (500-600 hours)For all models from the C, E, L, P and R

series

For models from the 5220, 5250, 6300, 6330 and 8350 series with engines

from 1999

Works with all post-2007 models, especially suited for cold-climates and

long oil change intervals (500-600 hours)

For all post-2001 models for cereal combine harvesters from the 1070, 1100,

7000, 8000, 9000, C, S, T and W series; forage combine harvesters models 7050

and 7050i and cotton combine harvesters (9970 model)

For years 1982-2006 models (series Hillmaster included) with oil change intervals of between 150-200 hours

Works with all post-2005 models, especially with the Beta series, for oil

change intervals longer than 450 hours

For all the models from the Activa, AL, Centora, Cerea, Fortia series, and other

previous models (Perkins and Valmet engines)

For 1982-2000 models oil change intervals of 250 hours. Alternative

Recommendation: MAXITRACTOR 15W40, with oil change intervals of between

150-200 hours

Works with all post-2007 models, good for long oil change intervals (600 hours)

For all the models from the AL (50, 500), Clayson 8000, CR9000 Elevation, CS (500, 600, 6000), CSX7000, CX (700, 800, 8000), L (500, 600), TC(50, 5000), TF (40, 70), TL58,

TR88 and TX (30, 60) series

For 1982-2000 models with oil change intervals of 150-200 hours

Works with all post-2002 models, with long oil change intervals (500-600

hours). Optimum viscosity in cold-climates 5W30:

AVEROIL UHP 5W30

All combine harvesters from the Avero, Dominator, Lexion, Medion and

Tucan series

All choppers from the Jaguar 900, Jaguar Green Eye and Jaguar Salix series

Optimum viscosity 15W30:AVEROIL GLOBAL 15W30

Optional for engines with natural suction and generally for all 1979-2001 models

that use STOU motor oils with oil change intervals up to 200 hours

AVEROIL GLOBAL 15W30/10W40/15W40

AVEROIL UHP5W30/10W40

AVEROIL TIR 15W40

To get better performance from Euro 5 and Euro 6 engines equipados con sistemas de postratamiento de gases con filtro de partículas diesel (DPF/FAP), we recommend using ACEA E6/E9 or API CJ-4 motor oil: AVEROIL UHP 10W40 and 5W30 ou AVEROIL FAP 15W40. En caso de duda consulte con nuestro SAT o nuestra Guía de Lubricación en www.olipes.com

Introduced in 2006. For high-speed, four-stroke engines designed to meet USA 2007 on-highway exhaust emission standards. It admits diesel fuels ranging in sulfur content up to 0.05%. However sulfur content may impact oil drain interval. Low SAPS oils are effective at sustaining emission control system durability where particulate filters (DPF or FAP) and other advanced after-treatment systems are used.

Introduced in 2002. For high-speed, four-stroke engines, included EGR engines, designed to meet USA 2002 exhaust emission standards. It admits diesel fuels ranging in sulfur content up to 0.5%. (Also variation viscosity control).

Introduced in 1995. For severe duty, high-speed, four-stroke engines using fuel with less than 0.5% sulfur content.

Introduced in 1994. For off-road, indirect-injection diesel engines including those using fuel with over 0.5% sulfur content.

Engine

API Diesel (Commercial)

CI-4(CI-4 Plus)

CG-4

CF-4

CG-4

CF(CF-4)

E7

For high-performance engines under heavy-duty conditions, with EGR and/or SCR, and long-drain oil interval.

For high-performance engines under heavy-duty conditions, with EGR and/or SCR.

For high-performance engines under heavy-duty conditions, with EGR and long-drain oil interval. Low SAPS for particle filters (DPF), requires fuel with low sulfur content.

For high-performance engines under heavy-duty conditions, with EGR. Low SAPS for particle filters (DPF), requires fuel with low sulfur content.

ACEA - 08

120000

100000

80000

60000

40000

20000

02008

The Euro 5 standard came into force on Sep.-01-09 for the approval of vehicles, and from Jan.-01-11 for the registration and sale of new types of cars.The Euro 6 standard will come into force on Sep.-01-14 for the approval of vehicles, and from Jan.-01-15 for the registration and sale of new types of cars.

2009 2010 2011 2012

Diesel Engines – Period: 2008-2012Evolution of the Motor Oil Market in the EU

Euro 4

E2, E3, E5E4E6E7E9

ACEA

Euro 5

Oil

Volu

me

(Met

ric To

ns)

Oils-Diesel

* Satisfy API CH-4

AVEROIL TIR 15W40

AVEROIL GLOBAL 15W30/10W40/15W40*

CJ-4

CI-4(CI-4 Plus)

CG-4

CF-4

CI-4(CI-4 Plus)

E4 E4

E7 E7 E7E7

E6

E9

AVEROIL TIR UHP 10W40

CI-4

E6

AVEROIL UHP 10W40

AVEROIL UHP 5W30

AVEROIL FAP 15W40

AP

I SERVICE SL/CI-4

SAE10W - 40

UHPD10W-40 100% Group III 10W-40

5W-30 100% Group III

UHPD Low SAPSE6/228.51/3477E4/228.5/3277

SHPD15W-40 Group I10W-40 15W-30 Gr. I +30% Gr. III

15W-40 100% Group IISHPD Low SAPSE9/CJ-4/228.31E7/CI-4/228.3/3275

Extended drain oil interval

Standard drain oil interval

Equipped with SCR

UHPD and SHPD Euro 5 Profiles

Equipped with DPF

}

}

SAE J306 Grade - API level

ALLISON

CATERPILLAR

MIL

RENAULT

SOMECA

Other specifications

OTHER SPECIFICATIONSSAE 15W40 - 85W90

API CF/GL-4

C3/C4

TO-2

MIL-L-2104 D/2105

TRACTO CONTROL

Complies

MB 227.1, NFE 48603 HVDIN 51524/3 HVLP (ISO 68/100)

SAE 10W30 - 75W85API GL-4

C3/C4

TO-2

White Farm Q 1826

SAE 10W30 - 75W85API GL-4

C3/C4

TO-2

Case NH MAT 3525

SAE 20W40 - 80W90API GL-4

C3/C4

TO-2

Komatsu-Hanomag

MAXITRACTOR15W40

MAXITRACTOR20W40 FS

MAXITRACTOR10W30 FS

Lubricants

Multi-useUTTO/STOU

MAXIFLUID JDCASE IHUTTO-type motor oil MS 1205, MS 1206, MS 1207,

MS 1209, MS 1210, B6MS 1204, MS 1205, MS 1206,

MS 1207, MS 1210, B6

UTTO-type motor oil

Transmissions for tractors and hydraulic elevator equipment

ZF TE-ML 06B, ZF TE-ML 07B

ZF TE-ML 03E/05E ZF TE-ML 03E/05F, ZF TE-ML 06K

Volvo WB 101

JDM J27A

JDM J20C JDM J20C JDM J20C

MF 1143, MF 1144

Ford ESN-M2C 159B

Ford ESN-M2C 86B,Ford ESN-M2C 134D

Ford ESN-M2C 86B,Ford ESN-M2C 134DFord ESN-M2C 134D

NHA 2C-201.00

MF 1110, MF 1127, MF 1129A, MF 1135, MF 1141, MF 1143

MF 1135, MF 1143, MF 1145

MF 1135, MF 1143, MF 1145

UTTO-type motor oil

STOU-type motor oil

UTTO-type motor oil

Hydraulic Fluid

STOU-type motor oil

UTTO-type motor oil

JOHN DEERE

MASSEY FERGUSON

NEW HOLLAND FIATAGRI-FORD

VOLVO

ZF

MAXIFLUID46/68 HV

ISO Grade

Hydraulic Fluid and EP Lubricant

Other Specifications

MAXIFLUID32 HLP

MAXIFLUID46 HLPSPECIFICATIONS MAXIFLUID

68 HLP

Transmissions and Differentials

Hydraulic Fluids

DOT-4 Brake Fluid

SPECIFICATIONS MAXIGEAR 90 LS PLUS

SAE J306 Grade – API level quality

MIL

Other specifications

MAXIGEAR EP 90/80W90/140

MAXIGEAR GL580W90/85W140

90/80W90/140GL4

MIL-L-2105 B

MAXIGEAR EP 90/140:General EP/Antiwear

DIN 51517/3U.S. 224

MAXIGEAR EP 80W90:MAN 341 N

ZF TE-ML 02A/16A/17A/19A

MAXIGEAR FS90 GL4

80W90/85W140 GL4/5

MIL-L-2105 D

MAXIGEAR GL5 80W90:MAN 342 N

ZF TE-ML 05A/07A/08/12E/16B-C-D/17B/19B

90GL4 LS

Ford M2C86-B/M2C134-D

Komatsu - HanomagVolvo WB 101

ZF TE-ML 03E/05E/06K

80W90-85W90-90GL5 LS

MIL-L-2105 D

LS (Limited Slip)ZF TE-ML 05C/12C/16BE

MAXIFLUID BRAKE meets UNE 26-109-88, DOT-4, ISO 4925, SAE J 1703 and SAE J 1704 specifications.

INTA certified. Do not use brake fluids which are not certified by accredited agencies.

MAXIFLUID PSF 11S is especially designed for use in: power steering, height control automatic systems, dampers, hydropneumatic suspensions, stability and traction control systems (ESP, ASR, ...), hydraulic folding roof systems on convertible vehicles, central locking systems, truck cab lifting system, etc.. MAXIFLUID PSF 11S is suitable for use in extreme conditions and guarantees maximum performance system in which is used from -40°C to +130°C.

Power Steering Fluid

32

DIN 51524/2 (HLP)AFNOR NFE 48-603 HM

Eaton M-2950-S/I-286-S3Cincinnati Machine P-68Denison HF-0/HF-1/HF-2

46

DIN 51524/2 (HLP)AFNOR NFE 48-603 HM

Eaton M-2950-S/I-286-S3Cincinnati Machine P-70Denison HF-0/HF-1/HF-2

68

DIN 51524/2 (HLP)AFNOR NFE 48-603 HM

Eaton M-2950-S/I-286-S3Cincinnati Machine P-69Denison HF-0/HF-1/HF-2

46/68

DIN 51524/2-3 (HLP/HVLP)AFNOR NFE 48-603 HM/HV

Sperry Vickers M-2952-SCincinnati Milacron P-70/69

Denison HF-0/HF-1/HF-2ISO 11158 (HR)

GardeningSTARTWIN 10W40 4T

The newest generation of oil lubricants, high-performance and high-concentration, formulated for four-stroke gasoline engines,

and designed for the major professional gardening machinery manufacturer equipment and for irrigation motors. Good for usage with engines, transmissions and wet clutches. Maximum lubrication

even in the hardest conditions, especially for machinery and motors that require frequent maintenance and cleaning.

API SG, JASO T903-98 MA/MA2.

STARTWIN 2TA full range of synthetic-based lubricants, formulated for two-stroke engines. Works with lead-free gasoline. Maximum protection for engines used for frequent and high-stress jobs. We recommend STARTWIN 2T BBO (Biodegradable) for use in sensitive environments.

CHAINSAW LUBRICANTS High-viscosity adhesive lubricant with anti-corrosive additives and unctuosity improvers that guarantee protection for the chassis, the blades and the chain. Specially developed for every type of chain saw with pressurized greasing systems. Maximum performance with chain saws for professional use. We recommend using BBO CHAIN SAW OIL (Biodegradable) in sensitive environments to meet current European regulations. SAE 30 (BBO Chain Saw Oil: Biodegradabillity according to CEC L-33-A-93)

At OLIPES, we have the right lubricant for all your agricultural machinery: grease, hydraulic, synthetic, biodegradable and mineral fluids, homologated motor oils, transmission fluids, reducer fluids and UTTO and STOU multi-use lubricants that go above and beyond that most demanding specifications that the major manufacturers have set.

Our products give you maximum reliability in the most severe work conditions.

Our highly qualified Technical Assistance Service (TAS) consultants will always be here to help you choose the right lubricant for your machinery and vehicles. With OLIPES lubricants, your engines and equipment will give you maximum output and performance.

Choose OLIPES, lubricants for Professionals.

Forestry

Milking

MAXICER PREMIUM 10/20 and 30/40 are lubricants that have been developed for vacuum pumps in use in milking areas.

They contain anti-oxidant and anti-corrosive additives while also reducing foam formation, which protects lubricated parts and increases the reliability of your machinery. We recommend 10/20 viscosity, especially for cold climates and 30/40 viscosity for high temperature usage. We recommend MAXICER PREMIUM as a lubricant for alternative compressors.

MAXIFLUID ATF 3309 - TRANSMISSION FLUIDAccess the on-line lubrication guide of Olipes on www.olipes.com and confirm which of the ATF fluids is the most recommended for each transmission or hidraulic system. Olipes manufactures specific lubricants for each transmission kind.

We recommend substituting OLIBLANC H-68 for MAXICER PREMIUM anywhere you need a non-toxic lubricant to meet food-industry requirements, for lubricants that come into indirect contact with foodstuff. Category Code H1. NSF Registration Number 141983.

OLIBLANC M White transparent medicinal oils, odor-free and flavor-less, also known as liquid vaseline, vaseline oil or liquid paraffin.We specifically recommend this for lubricating and cleaning saws and cutting tables. These oils don't stain wood and they lower the risk of fungus or yeast growth. Category Code H1. NSF Registration Number 141984

Lubricating Greases

MAXIGRAS T6Synthetic grease, doesn't stain. Doesn't drip, we recommend its use for lubricating bearings and agricultural machinery and heavy equipment for jobs near water: Lubricant for bolts, bearings and farming machinery; combine harvesters, tractors, backhoes, wheel loaders...

CLASSIFICATION: NLGI grade 2 DIN KPHC2G-20 ISO-L-XBCHB-2

MAXIGRAS C45 EPLithium grease multi-purpose EP, high-quality. Excellent Extreme Pressure properties. We recommend it for lubricating bearing, axles and bolts, centralized lubrication systems (depending on the NLGI grade). Also complies with NLGI 000/00 for lubricating lawn-mower rotors or similar types of machinery.

CLASSIFICATION: NLGI grade 000/00, 0, 1 and 2. For NLGI grade 2: DIN KP2K-20 ISO-L-XBCEB-2

MAXIGRAS 46MOLY Grease (black) with EP solid additives, formulated with the best raw materials. High-adhesion to metals. We recommend its use for lubricating axles and bolts.

CLASSIFICATION: NLGI grade 2 DIN KPF2K-20 ISO-L-XBCEB-2

MAXIGRAS COMPLEX EPLithium complex grease (blue) that gives great performance, and has a high dropping point, making it especially good for permanent or long-term lubrication for bearings and for all types of agricultural machinery and equipments, off-highway and commercial vehicles: Lubrication for bearings at high-temperatures, axles, wheel bearings, bolts...

CLASSIFICATION: NLGI grade 2 DIN KP2P-20. ISO-L-XBEHB-2

MAXIGRAS C42Anhydrous calcium grease, for

universal application. Formulated with anhydrous

calcium soap and highly refined mineral bases. Grease for

lubricating chassis, combine harvesters, and all-purpose

grease for agricultural, mining and construction machinery as

well as boat decks. Good anti-corrosive properties and

resistant to water when washing.

CLASSIFICATION: NLGI grade 2 DIN M2G-20

ISO-L-XBBEA-2

MAXIGRAS 542/592/593Complex non-toxic greases that give great performance. Homologated by NSF and InS, category H1, for lubricants that come into indirect contact with foodstuff. We recommend them for lubricating machinery that undergo extreme temperature changes, even if it comes into contact with water or is susceptible to chemical attacks. Maximum protection. Excellent pumpability. We especially recommend them for containers and animal food grinders.

MAXIGRAS 542: NLGI grade 2 DIN K2G-20 ISO-L-XBBIA-2 HOMOLOGATED: Category Code H1

MAXIGRAS 592/593: NLGI grade 2 DIN KP2P-20 ISO-L-XBEIB-2 HOMOLOGATED: Category Code H1

Non-staining calcium-sulfonate Complex grease that gives great performance, with a high dropping point, making it especially good for lubrication under extreme work conditions and situations with water, high-temperatures and possible chemical attacks. Great anti-corrosive capacity. Maximum protection. We especially recommend it for wood processors, towing machinery, combine harvesters, cables, chains, exposed gears and any other type of agricultural , off-highway and ports machinery or equipment.

CLASSIFICATION: NLGI grade 2 DIN KP2R-20 ISO-L-XBFIB-2

MAXIGRAS 101

disp

onible en spra

y

Olipes coolants not only exceed these requirements, they also offer the following advantages:Monoethylenglycol base: good biodegradeability NAP free corrosion inhibitors: free of carcinogenic componentsHigh protection of Aluminium and MagnesiumMade from demineralised water:

CIRCUIT PRESSURE MAXIMUM TEMPERATURE RANGE

130ºCto

160ºC

BRANDSCASE IH

CLAAS

DEUTZ-FAHR

FENDT

JOHN DEERE

LAMBORGHINI

LANDINI

MASSEY FERGUSON

NEW HOLLAND FIATAGRI-FORD

RENAULT

SAME

CONCENTRATION

40%to

60%

1,5 At.to

2,6 At.

Why

is a

coo

lant

needed?

Col

our d

oes not affect

The excess heat generated in engines during combustion has to be evacuated via the cooling circuit. That’s why we need coolants.

Colorants are only an aesthetic-visual property which some manufacturers use to distinguish between coolants of a different nature.

quality

Requirements to be met by a good coolant:Low freezing point – High boiling pointProtection from corrosion (particularly of the Aluminium, Magnesium and their alloys)Protection from cavitation (anti-foam properties)Facilitates leak detectionPossibility of use all the year round

our diluted coolants do not contain heavy metals, Calcium or Magnesium ions, avoiding the formation of scale on the circuit.

DO NOT MIX different kinds of coolant/anti-freeze, as certain additives may inter-react, forming acids compounds which are dangerous for the engine.

Anti-freezeCoolants

ORGANICCONCENTRATE

ORGANIC 50%

FLOW BRILLIt cleans, renovates, shines and protects dashboards, leatherette, plastic seats, roofs and vinyl elements, door panels, glove compartment, bumpers, etc; giving back its original aspect. It avoids dust adherence.

Additives

Greases

MAXIGRAS CADENASSpray lubricant with PTFE specially recommended for chains, bearings, hinges, cables, spindles, threads, gears, rods, rails,

hydraulic pistons, etc. Excellent anticorrosive, antioxidant and antiwear capacity. Compatible with all kind of joins and paints.

MULTI-FLOW PENETRATINGCorrosion-proofing dielectric protector, deblocking, antioxidant, water repellent, formulated to dissolve oxide in seconds and protect all kinds of parts from corrosion, humidity and rust.

• It cleans the injectors and improves fuel flow

• It eliminates water from tank, avoiding sludges and bacteria

• It protects fuel system components

• It lubricates injection system, avoiding damages on the pump

Spray

Grease lithium complex EP. High Temperature.

Blue color. Especially recommended for wheel bearings.

ASTM D4950 “GC-LB”.

Antiseize and antinoise paste with copper for threaded joins and brake caliper

assembling elements.It supports up to +1100ºC.

preventive treatment for Diesel antibacterial shock treatment

the special and definitive solution for Diesel and Biodiesel

• Direct use: no mixtures, no complicated procedures

• Immediate results

• Economic: it allows the utilization of 100% fuel treated

Multipurpose grease lithium EP.Available in NLGI grades 000/00/0/1/2/3. ASTM D4950 “LB”.

Grease Moly EP high performance.Black color. With Molybdenum Disulphide.ASTM D4950 “LB”

Greases classified ASTM D4950 “LB” for use in automotive

Grease classified ASTM D4950 “GC-LB” for use in automotive

COMPLEX EP

ANTISEIZE

C45 EP

46

Vehicle and Workshop Maintenance

Workshop Maintenance

MAXICER PREMIUMLubricant for air compressors.

VDL quality.

OIL ABSORBENTFireproof oil absorbent from sepiolite.

MASTERCLEAN ECOPASTHandwashing paste special for mechanics.With micro-abrasives which reinforce their cleaning action, even run dry.

Degreasers

Hygiene

MASTERCLEAN DESDegreaser, solvent based for washing machines.

MASTERCLEAN BRISPowerful windscreen washer.Direct use.Crystallization starts at -6ºC

with dispenser

MASTERCLEAN HANDHandwashing gel special for mechanics.

MASTERCLEAN BBOBIODEGRADABLES Detergent-degreasers, water based, for handwash or high-pressure washers.

INDUSTRIAL AND MINI ROLLS PULPBlue color.

The information contained in this booklet, based on the experience and knowledge of OLIPES SL in the development and manufacture of lubricants and data provided by the manufacturers (OEM), represents general and non-binding guidelines. OLIPES SL gives no express or implied warranty on the product properties or the suitability for a particular application. The user’s responsibility is to use the products according to their suitability and functionality for the intended application and with due care, according to the instructions of the manufacturer of the vehicle or machinery.

The performance of our products may be affected by a number of factors, including: the specific application, the method of application, operating conditions, the state of lubricated mechanical components prior to application, external contamination, etc. For this reason, it is not possible to make universally valid recommendations or statements about the functionality of our product.

Our products are subject to a process of continuous improvement. OLIPES SL reserves the right to change its product range, its formulations and manufacturing processes, as well as all information contained in this brochure at any time and without notice.

All trademarks, commercial and/or service, mentioned or implied in this catalog are the property of their respective owners. You should not interpret that any product sold or manufactured by OLIPES SL is an original OEM product. They are mentioned solely for information to the user.

With the publication of this booklet will no longer be valid all previous editions. Any form of reproduction requires express prior written permission of OLIPES SL.

© OLIPES SL All rights reserved.