OLDCASTLE POLYMER

1212(formerly H-Series)

(800) 735-5566oldcastleenclosures.com

COVERStyle:Material:Model:Weight:Std. Fasteners:

Options:Surface:Performance:

Flush SolidPolymer Concrete12” x 12”10 lbs1/2-13 Stainless Steel Hex Head Bolt, Washer and Floating NutLogos and Special MarkingsSlip ResistantANSI/SCTE-77, Tier 15 or Tier 22*

LOAD RATING / NOTES

BODY

For use in non-vehicular traffic situations only.Weights and dimensions may vary slightly.Actual load rating is determined by the box and cover combination.

Material:Model:Weight:Wall Type:Performance:

Polymer Concrete12” x 12”12” Depth: 32 lbs.StraightANSI/SCTE-77 Tier 22

MEDIUM DUTYANSI/SCTE TIER 15

HEAVY DUTYANSI/SCTE TIER 22

* Based upon lid and body combination, this unit can be Tier 15 or Tier 22. T22 rating when paired with T22 polymer concrete lid.

Cover comes standard with permanent markings for manufacturer, load rating, model size and manufacturing location.

Bolt DownDetail

All information contained on this sheet is current at the time of publication. Oldcastle reserves the right to discontinue or update product information without notice.

(800) 735-5566© 2018 Oldcastle Infrastructure

Revision 11/09/18

(800) 735-5566oldcastleenclosures.com

OLDCASTLE POLYMER

1212(formerly H-Series)

* Lid Gaskets inhibit water flow into the box, they do not make enclosure fully waterproof.

COVER OPTIONS

FASTENER OPTIONS

ADD ON OPTIONS

Oldcastle Polymer, Flush SolidSteel, Solid

Hex Head Bolt (A) Penta Head Bolt (B)Penta Head Coil Thread Bolt (B)Oldcastle Vandal Resistant Bolt (C)Captive Bolt Retainer

EMS MarkerMouseholes/KnockoutsRack MountCable Racks/Cable ArmsUnistrutPulling Eye - 1,000 lb and 3,000 lbGround BussDividersRacking ProvisionLid Gaskets*Solid BottomCustom Marking Plate (Polymer)

A

Coil Thread Bolt Retainer(for standard thread)

B CStandard Thread

EMS Marker

Rack Mount Pulling Eye

Ground Bus

Cable RackCable Arm

Unistrut

WARNING: Cancer - www.P65Warnings.ca.gov