old dominion’s new central utility plant reigns as a … · old dominion university central...
TRANSCRIPT
PROJECT NUMBER
DRAWING TITLE
SCALEDATE
FABRICATION DRAWINGS
825 W 600 NLINDON, UTAH 84042
[email protected] 801.805.6657
FABRICATION SERVICES
FABRICATION ESTIMATE RHETT COLES
PROPRIETARY AND CONFINDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWINGS IS THE SOLE PROPERTY OF
AQUATHERM. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF AQUATHERM IS
PROHIBITED.
PAGE NUMBER
CONTRACTOR
JERRY CHIZMADIAAQUATHERM RSM
FABRICATION DRAWINGS NEED TO BE SIGNED FOR
APPROVAL PRIOR TO FABRICATION
MICHAEL SEGALA
OVERALL
2019-6350
07/01/19
M100
JRC
• Using Aquatherm’s Scan-to-Fab service and Fabrication Service on this project enabled the installation crews to maximize their time and meet a very tight schedule
• Thanks to virtually leak-free heat-fusion connections, the installed system easily passed its pressure test and qualified for Aquatherm’s multimillion-dollar warranty
• In day-to-day use, Aquatherm pipe significantly reduces or eliminates the problems that corrosion and scaling can cause over the life of a system
AQUATHERM ADVANTAGES
801-805-6657www.aquatherm.com
OLD DOMINION’S NEW CENTRAL UTILITY PLANT REIGNS AS A FAST-TRACK MASTERPIECE
THE CHALLENGEA tight construction schedule because of the number and type of campus buildings affected left no margin for error on this piping project’s completion date
THE SOLUTIONThanks to Aquatherm’s Scan-to-Fab, Fabrication Service, and fast installation, a project that would have taken four months with steel pipe was completed in five weeks
PROJECT:Old Dominion University Central Utility Plant, HVAC
PRODUCTS:aquatherm blue pipe®
LOCATION/DATE:Norfolk, VAWinter 2019
Aquatherm’s Scan-to-Fab and Fabrication Services teamed up to provide a custom-fit solution in Old Dominion University’ central utility plant.
“Aquatherm came into the existing building and scanned it completely. We took the cloud points from the scan and sent the model drawings to Aquatherm’s fabrication group in Lindon, Utah, and they used the information to custom fabricate the pipe for this facility.” — Richard Goad, Project Executive, JRC Mechanical, Chesapeake, VA