oils greases car care - biohansa catalogue_biohansa.pdf2 3 w ww.agrinol.com.ua w ww.agrinol.com.ua...
TRANSCRIPT
-
www.agrinol.com.ua
PRODUCTION REFERENCE BOOK
OILS GREASES CAR CARE
-
2 3
www.agrinol.com.uawww.agrinol.com.ua
OILS, GEASES, CAR CARE Production Reference Book. First edition (supplemented and revised) / Edited by Candidate of Chemical Sciences V.I. Gumenniy -”Agrinol” 2013 - p.
The reference book contains brief information about the purpose, fields of use and normative quality indices of the lubri-cants produced by the Limited Liability Company “Agrinol”. The reference book can be used as a guide to choose and utilize the association’s production.
©LLC RU SIE «Аgrinol», 2013
Limited Liability Company Russian-Ukrainian Search and In-dustrial Enterprise (LLC RU SIE) “Agrinol” specializes in the pro-duction of such lubricating materials as lubricants, oils, lubricat-ing and cooling liquids (LCL) and steel drums. The introduction of new technologies and the improvement of the already existing ones by modernizing the equipment and utilizing new materials, highly qualified specialists and the quality management system ISO 9001-2009 (ISO 9001:2008) enable the enterprise to manufac-ture products of high quality that corresponds to the requirements Ukrainian and foreign consumers. The oils, lubricants and LCL pro-duced by RU SIE “Agrinol” are widely used at enterprises of con-centrating, metallurgical and power supply complexes as well as in mechanical engineering, transport, and agricultural sector not only in Ukraine but also in Russia, Byelorussia, Latvia, Kazakhstan, Moldova and others.
On the basis of the modern control and analytical laboratory accredited by the State Standard of Ukraine, as well as the experi-mental laboratory in the association, constant effort is being made to increase the range and quality of product that helps ensure the fullest satisfaction of the requirements of specific consumers.
This enables out enterprise to guarantee the best satisfaction of specific consumers’ requirements.
“Agrinol” is always open to mutual beneficial collaboration with all the enterprises and organizations interested in the devel-opment , industrial production assimilation and application of new types of lubricating products.
A structural subdivision forming a part of the company pro-duces metal drums for petroleum, chemicals, food and other prod-ucts. Manufacturing takes place in modern production lines, which provides along with high product quality, competitive price pack-aging. The range of packaging meets state standards, specifica-tions and UN international rules for transport of dangerous goods.
The reference book contains brief information about the pur-pose, fields of use and normative quality indices of the lubricants produced by the RU SIE “Agrinol”. The reference book can be used as a guide to choose and utilize the association’s production.
For further information, please, go to the web-site of the en-terprise: www.agrinol.com.ua
-
4 5
www.agrinol.com.uawww.agrinol.com.ua
Oils .......................................................................... 7Agrinol universal multigrade motor oils ..............................9Oils for automotive diesels ..............................................13Universal mineral motor oils ...........................................16Oils for 2- and 4-stroke engines of small machinery ............17Oils for marine and locomotive engines ............................19Transmission oils ...........................................................23Transmission oils for industrial an obsolete equipment .......27Automatic transmission fluid ..........................................28Oils for hydromechanical transmissions ............................29Hydraulic low-temperature oils .......................................30COMPRESSOR OILS .........................................................33COMPRESSOR OILS for REFRIGERATING MACHINES ..............35COMPRESSOR OILS for Gas-Transit Units ...........................36TRANSFORMER OILS .......................................................37CABLE OILS ...................................................................39INDUSTRIAL OILS .........................................................41ZINC-FREE HYDRAULIC OILS ............................................43HYDRAULIC OILS OF PREMIUM GROUP ..............................43PREMIUM GROUP ...........................................................44INDUSTRIAL OILS FOR HYDRAULIC SYSTEMS ......................45GEAR OILS ....................................................................47PREMIUM GROUP ...........................................................47GEAR OILS ....................................................................48For ROLLING MILLS ........................................................49
OILS for SLIDEWAYS .......................................................51OILS for LIQUID FRICTION BEARINGS ...............................52CYLINDER OILS .............................................................53GENERAL PURPOSE OILS ................................................54HEAT-TREATMENT OILS ...................................................59VACUUM OILS ................................................................60FLUSHING OILS .............................................................62CONSERVATIVE OILS .......................................................63VACUUM OILS ................................................................64HEAT-TREATMENT OILS ...................................................65
Grease Lubricants .................................................... 67GENERAL-PURPOSE LUBRICANTS for STANDART and ............68AUTOMOTIVE LUBRICANTS ..............................................70MULTI-PURPOSE LUBRICANTS ..........................................72RAILWAY LUBRICANTS ....................................................76INDUSTRIAL LUBRICANTS ...............................................80METAL-PLATING LUBRICANTS...........................................81INDUSTRIAL LUBRICANTS FOR ROLLING MILLS ...................82INDUSTRIAL LUBRICANTS ...............................................84HEAT-RESISTANT GREASES ..............................................88CHEMICALLY RESISTANT LUBRICANTS ................................93DRILLING LUBRICANTS ...................................................95LOW-TEMPERATURE LUBRICANTS ......................................96ROPE GREASES ..............................................................97INSTRUMENT LUBRICANTS ............................................ 100
CONSERVATION (PROTECTIVE) LUBRICANTS ..................... 101INSTRUMENT LUBRICANTS ............................................ 102SEALING LUBRICANTS .................................................. 103REDUCER LUBRICANTS(Semi-Fluid) ................................ 105TECHNOLOGICAL LUBRICANTS ........................................ 106BRAKE-IN PASTES ........................................................ 107INSULATION LUBRICANTS ............................................. 108
TECHNOLOGICAL COOLING LUBRICANTS .................... 109OIL COOLANTS ............................................................. 111WATER-BASED COOLING LUBRICANTS .............................. 113
AUTO CHEMISTRY ................................................... 119COOLING LIQUIDS ....................................................... 121WINDSHIELD FLUIDS .................................................... 123
OTHER PRODUCTS ................................................... 124TECHNICAL CLEANING AGENT ........................................ 125ROAD BITUMINOUS EMULSIONS ..................................... 126ADDENDUMS ............................................................... 128Packing and transportation ........................................... 128
METAL PACKING ..................................................... 129BARREL WITH FOOD INTERNAL COVERAGE .................... 131
-
6
www.agrinol.com.ua
Oils
-
8 9
www.agrinol.com.uawww.agrinol.com.ua
Specialists of the «Agrinol» company developed line of motor oils, adapted to the domestic conditions of mobile equip-ment operation. These oils contain specially selected and balanced components which actively cleanse and protect engine parts from deposits and sludge where it is really important. The range of Agrinol SAE motor oils includes PREMIUM class oil for modern motor cars, cargo, passenger and road-construction vehicles, which are working under the heavy loads; and also oils of STANDART class for the older models.
New generation transmission oils «Transmission» and automatic transmission fluid (ATF) include both mineral and synthetic oils that are intended for use in extreme conditions where increased antioxidant and EP properties are needed.
«Agrinol» company produces a full range of traditional lubricants along with high-tech, synthetic and semi-synthetic lubricants for the last generation automotive technique.
Agrinol 5W-40 SL/CF, CG-4/SJ — universal synthetic motor oils, intended for use in modern gasoline and diesel engines of cars, trucks and off-road equip-ment, operating in any environmental conditions and with extreme type of driving (highlands, «start-stop» mode, sport style).
Agrinol 10W-40 SL/CF, CG-4/SJ — this universal semi-synthetic motor oil is intended for all types of modern diesel and gasoline engines of cars and minibuses (including turbocharged engines and cata-lyst). It is an optimal decision for mixed fleets.
SL/CF oils are used in engines operating on fuel with a sulfur content of 0.5% of the mass and above.
Temperature range:– for 5W-40: from minus 30°С up to +40°С;– for 10W-40: from minus 25°С up to +40°С;
Index name Agrinol 5W-40 CG-4/SJAgrinol 5W-40
SL/CFAgrinol
10W-40 SL/CFAgrinol 10W-40
CG-4/SJ
Kinematic viscosity at 100°С, mm2/s 11,7-16,3 12,5-16,5 12,5-16,3
Viscosity index, not less than 140 130
Total Base Number, mg КОН/g, not less than 8,5 8,5 9,0 8,5
Sulphated ash, %, not more than 1,5 1,5 1,5 1,5
Temperature, °С: • flash point in open crucible, not less than • pour point, not more than
200Minus 32
200Minus 28
200Minus 32
Color, CNT units, not more than 3
Mass fraction of active elements, %, not less than • calcium • zinc
0,250,10
0,250,10
0,280,11
0,250,11
Agrinol universal multigrade motor oils
Premium groupTS U 23.2-30802090-085:2009
-
10 11
www.agrinol.com.uawww.agrinol.com.ua
Agrinol 10W-40 CF-4/SH, SG/CD — universal semi-synthetic motor oils.Agrinol 15W-40 CF-4/SG — universal mineral based motor oils.These oils are intended for lubricating of high-octane gasoline and powerful four-stroke diesel en-
gines (main type) of cars and microbuses, including turbocharged engines and catalyst. Products are recommended for home equipment and for mixed vehicle fleets, as well as for engines working on gas fuel.
Agrinol 15W-40 SF/CC, SG/CD — universal mineral based motor oil for highly-accelerated turbo-charged engines, and engines without it, working in severe conditions on sour fuel as well as for unlead-ed gasoline with oxygenates.
Products are recommended for obsolete equipment.Application temperature range:– for 10W-40 oils: from minus 25°С up to +40°С;– for 15W-40 oils: from minus 25°С up to +40°С;
Index name Agrinol 10W-40 SG/CDAgrinol 10W-40
CF-4/SHAgrinol 15W-40
SF/CCAgrinol 15W-40
SG/CDAgrinol 15W-40
CF-4/SG
Kinematic viscosity at 100°С, mm2/s 12,5-16,3
Viscosity index, not less than 130 115 120
Total Base Number, mg КОН/g, not less than 7,2 7,5 6 7,5 8,2
Temperature, °С: • flash point in open crucible, not less than • pour point, not more than
200Minus 28
200Minus 32
205Minus 25
210Minus 28
205Minus 30
Sulphated ash, %, not more than 1,3 1,4 1,5
Mass fraction of active elements, %, not less than • calcium • zinc
0,200,10
0,230,10
0,200,10
0,230,10
Agrinol 15W-40 CG-4/SJ, CG-4/SL are mineral, universal, motor oils, which are used in high-speed, four-stroke diesel engines of HPD (High Performance Die-sel) class with and without turbocharging.
Agrinol 15W-40 CН-4/SJ — universal, mineral based motor oils are intended for high-load, high-speed, fourstroke diesel engines of class HPD main type, that use fuel with a sulfur content exceeding 0,5 % by weight.
Agrinol 15W-40 CI-4 — mineral based universal motor oil, intended for exploitation of four-stroke diesel engines with various types of injection systems and pressurization (ranged from 2002 release).
Temperature range:– for 15W-40 oils: from minus 25°С to +40°С;
Index name Agrinol 15W-40 CG-4/SJAgrinol 15W-40
CG-4/SLAgrinol 15W-40 CH-4/SJ
Agrinol 15W-40 CI-4
Kinematic viscosity at 100°С, mm2/s 12,5–16,3
Viscosity index, not less than 120
Total Base Number, mg КОН/g, not less than 8,5 9 9 7,5
Temperature,°С: • flash point in open crucible, not less than • pour point, not more than
205Minus 30
205Minus 28
Color, CNT units, not more than 4
Sulphated ash, %, not more than 1,5
Mass fraction of active elements, %, not less than • calcium • zinc
0,250,10
Standard groupTS U 23.2-30802090-085:2009 TS U 23.2-30802090-085:2009
Premium group
Agrinol universal multigrade motor oilsAgrinol universal multigrade motor oils
-
12 13
www.agrinol.com.uawww.agrinol.com.ua
Agrinol universal multigrade motor oils Oils for automotive diesels
Agrinol SAE 10W CF-4 oil is designed for the lubrication of locomotive and marine diesel engines, bulldozer diesel engines of domestic and foreign produc-tion, metallurgical equipment of mining enterprises, various diesel engines operating in different con-ditions, drilling equipment etc.
Agrinol SAE 30 CF-4 and Agrinol SAE 40 CF-4 oils are designed for diesel engines of heavy trucks, mining and construction equipment operating under severe conditions.
Agrinol SAE 30 CF-4 can be used during the spring and autumn period s the hydraulic oil ISO 100 in hydrodrives of construction, mining and special equipment.
Agrinol SAE 40 CF-4 can be used in summer or in hot climates.Application temperature range: – SAE 40: from 0°С to +45°С;– SAE 30: from minus 5°С to +35°С;– SAE 10W: from minus 15°С to +25°С;
Index name Agrinol SAE 10W CF-4 Agrinol SAE 30 CF-4 Agrinol SAE 40 CF-4
Kinematic viscosity at 100°С, mm2/s 4,1–5,6 9,5–12,5 13,5–15,0
Viscosity index, not less than 95
Total Base Number, mg КОН/g, not less than 9,0
Temperature,°С: • flash point in open crucible, not less than • pour point, not more than
190Minus 20
220Minus 20
220Minus 15
Sulphated ash, %, not more than 1,5 1,5 1,5
Mass fraction of active elements, %, not less than: • calcium • zinc
0,300,1
Agrinol 15W-30 SF/CE — universal tractor oil used in all types of diesel en-gines, including: turbocharged, hydraulic systems, hydrostatic and mechanical transmissions, wet brake systems and multi-disc clutches, power shafts and hydraulic boosters for all types of tractors.
Agrinol 20W-40 SF/CC, Agrinol 20W-50 SF/CC are mineral-based multi-grade engine oils. Oils are designed for the lubrication of all gasoline and diesel engines in passenger cars of domestic and foreign production, including a turbocharged heavy-duty engines
Oil Agrinol 20W-50 SF/CC is specially adapted for engines with high degree of deterioration and equipment working in the southern regions.
Application temperature range: – for 15W-30 oils: from minus 20°С up to +40°С;– for 20W-40 oils: from minus 20°С up to +45°С;– for 20W-50 oils: from minus 20°С up to +50°С;
Index name Agrinol 15W-30 SF/CЕ Agrinol 20W-40 SF/CC Agrinol 20W-50 SF/CC
Kinematic viscosity at 100°С, mm2/s 9,3–12,5 12,5–16,3 16,3–21,9
Viscosity index, not less than 120 115
Total Base Number, mg КОН/g, not less than 9,0 6,0
Temperature,°С: • flash point in open crucible, not less than • pour point, not more than
210Minus 25
210Minus 28
215Minus 28
Sulphated ash, %, not more than 1,5 1,3
Mass fraction of active elements, %, not less than: • calcium • zinc
0,250,1
0,200,08
TS U 23.2-30802090-085:2009 TS U 23.2-30802090-085:2009Standard group Agrinol
SAE 10W CF-4
Agrinol SAE 30 CF-4
Agrinol SAE 40 CF-4
-
14 15
www.agrinol.com.uawww.agrinol.com.ua
M-8G2, M-8G2k are winter oils for diesel automotive engines, including those with moderate turbocharging, stationary diesel engines and diesel generators op-erating under severe conditions. Temperature range: from minus 20°С to + 25°С.
М-10G2, М-10G2k — summer oils for lubrication of automotive diesel engines, including those with moderate turbocharging, high-speed stationary diesel engines and diesel generators working in the op-erating conditions under which sedients are formed by high temperatures.
М-8G2k, М-10G2k oils unlike М-8G2, М-10G2 brands have more effective additive composition, which increases terms of oil change. Recommended for vehicles of KAMAZ, ZIL type for and «Ikarus»-type bus-es. Operating temperature range: from minus 5°С to + 30°С.
Index name М-8G2М-8G2k М-10G2
М-10G2k
Extra class First class Extra class First class
Compliance with classifications SAE (API) 20 (СС ) 20 (СС ) 30 (СС ) 30 (СС )
Kinematic viscosity at 100°С, mm2/s 8,0±0,5 7,5–8,5 11,0±0,5 11,0±0,5
Viscosity index, not less than 85 95 90 85 95 85
Total Base Number, mg КОН/g, not less than 6,0 6,0 6,0 6,0
Temperature, °С: • flash point in open crucible, not less than • pour point, not more than
200-25
210–30
200–30
205–15
220–18
205–15
Sulphated ash, %, not more than 1,65 1,15 1,65 1,15
Degree of purity, mg on 100 g of oil, not more than 500 450 500 500 450 500
Mass fraction of active elements, %, not less than • calcium • zinc • phosphorous
0,150,060,06
0,190,050,05
0,150,060,06
0,190,050,05
M-10V2 — summer oil for lubricating of middle-accelerated automotive die-sels SMD-14, А-41, D-50, D-37 and others. Operating temperature range: summer oil М-10V2: from minus 5°С to +30°С.
М-8DM, М-10DM — oil is intended for summer use for highly accelerated automotive diesels, high-speed stationary diesels and diesel generators of home and foreign production with turbo charger and without it, tractors, bulldozers, dump trucks, in heavy operating conditions or fuel, which vary in quality (including sour). Operating temperature range: summer oil М-10DM from minus 5°С to +30°С, winter oil М-8DM: from minus 20°С to +25°С.
Agrinol М-14G2k is intended for greasing of four-stroke transport diesel en-gines, highly accelerated automotive diesels without supercharging (or with limit-ed supercharging), that operate under moderate and heavy conditions. Agrinol М-14G2k oil can be used instead of М-10G2k motor oil according to GOST 8581 for summer operation of automotive diesels in re-gions with long and hot summers. Temperature range: from minus 20°С to +40°С.
Index name М-10V2 М-8DМ М-10DМ Agrinol М-14G2k
Compliance with classifications SAE (API) 30 (СВ ) 20 (СD ) 30 (СD ) 40 (СС)
Kinematic viscosity at 100°С, mm2/s 11,0±0,5 8,0–8,5 not less than 11,4 14,0-15,5
Viscosity index, not less than 85 102 90 90
Total Base Number, mg КОН/g, not less than 3,5 8,5 8,2 6,0
Temperature, °С: • flash point in open crucible, not less than • pour point, not more than
205–15
195–30
220–18
215–25
Sulphated ash, %, not more than 1,3 1,5 1,15
Mass fraction of active elements, %, not less than • calcium • zinc • phosphorous
0,080,050,05
---
0,300,09
–
0,190,050,05
GOST 8581-78 GOST 8581-78
TS U 23.2-32365441-173:2011
М-8G2, М-8G2k
М-10G2, М-10G2k
М-10V2
М-8DМ, М-10DМ
Agrinol М-14G2k
Oils for automotive diesels Oils for automotive diesels
-
16 17
www.agrinol.com.uawww.agrinol.com.ua
М-8V — winter oil for medium augmented automotive diesel engines (ZIL-130, GAZ-66,51, KaVZ, KAZ, PAZ, LIAZ). Also used in a medium augmented gasoline engines of cars and trucks (replacement intervals up to 18 thousand km). Can be applied in such medium augmented automotive diesel engines as SMD-14, А-41, D-50, D-37, etc., which are running on high sulfur fuel. Operating temperature range: from minus 20°С to +25°С.
М-6z/12G1 — multigrade oil for lubrication of boosted gasoline engines of passenger cars in regions with moderate climate and air temperature ranged from minus 20°С to +45°С.
Index name M-8V М-6z/12G1
Compliance with classifications SAE (API) 20W-20 (CВ/SD) 15W-30 (SF)
Kinematic viscosity at 100°С, mm2/s 7,5–8,5 not less than 12
Dynamic viscosity at minus 15°С, mPa·s, not more than – 4500
Viscosity index, not less than 93 115
Total Base Number, mg КОН/g, not less than 4,2 7,5
Temperature,°С: • flash point in open crucible, not less than • pour point, not more than
207–25
210–30
Sulphated ash, %, not more than 0,95 1,3
Mass fraction of active elements, %, not less than: • calcium • zinc
0,160,09
0,230,10
GOST 10541-78М-8V
М-6z/12G1
Agrinol Moto Racer 2T — low ash, mineral oil for the lubrication of modern two-stroke gasoline engines of average power, such as: chain saws, lawn mowers, boat motors, motorcycles, mopeds, etc.
Recommended ratio of the fuel mixture is: 1:40 (oil: petrol).Agrinol Aqua Moto 2T — low ash, synthetic oil for the lubrication of modern 2-stroke boat mo-
tors (including overhead) with water coolance (boats, motor boats, jet skis, jet skis), as well as engines of snowmobiles, motorcycles, chainsaws and other portable equipment with a variety of oil supply meth-ods (by adding a gasoline or by injection through the nozzle).
Recommended ratio of the fuel mixture is: 1:50 (oil: petrol).
Index name Agrinol Moto Racer 2T Agrinol Aqua Moto 2T
Compliance with classifications SAE / API / JACO/ ISO / NMMA 40 / ТС / FB / L-EGR / – 20 / – / – / – / TC-W3
Kinematic viscosity at 100°С, mm2/s 8,0-10,0 8,5-10,0
Viscosity index, not less than 90 110
Total Base Number, mg КОН/g, not less than 0,75 1,0
Mass fraction, %, not more than: • water • mechanical impurities
TracesAbsence
TracesAbsence
Temperature, °С: • flash point in open crucible, not less than • pour point, not more than
200– 25
90– 25
Sulphated ash, %, not more than 0,1 0,1
Mass fraction of active elements, %, not less than: • calcium 0,02 0,03
TS U 23.2-36451680-137:2010Agrinol Moto Racer 2T
Agrinol Aqua Moto 2T
Universal mineral motor oils Oils for 2- and 4-stroke engines of small machinery
-
18 19
www.agrinol.com.uawww.agrinol.com.ua
Agrinol Moto Drive 2T — low ash, synthetic oil for the lubrication of modern two-stroke gasoline engines of medium and high power, such as: chainsaws, snow-mobiles, karts, motorcycles, mopeds, and others. Oil is recommended for use both in mixture and in sep-arate fuel and oil supply.
Recommended ratio of the fuel mixture is:– for snowmobiles, motorcycles, etc. — 1:50 (oil: petrol);– for lawn mowers, chainsaws — 1:40 (oil: petrol).
Agrinol Moto Drive 4T — low ash, synthetic engine oil designed to lubricate the modern four-stroke engines of motorcycles, ATVs, scooters and other motor vehicles with any clutch, mobile equipment, wa-ter-cooled outboard boat engines.
Index name Agrinol Moto Drive 2T Agrinol Moto Drive 4T
Compliance with classifications SAE / APIISO
20 / ТС +L-EGD
10W-40 / SJ,SG–
Kinematic viscosity at 100°С, mm2/s 6,5–8,5 13,0–16,5
Viscosity index, not less than 120 138
Total Base Number, mg КОН/g, not less than 1,4 9,0
Mass fraction, %, not more than: • water • mechanical impurities
TracesAbsence
TracesAbsence
Temperature, °С: • flash point in open crucible, not less than • pour point, not more than
80– 30
205– 32
Sulphated ash, %, not more than 0,1 1,5
Mass fraction of active elements, %, not less than: • calcium • zinc
0,04–
0,250,11
TS U 23.2-36451680-137:2010Agrinol Moto Drive 2T
Agrinol Moto Drive 4T
М-14V2 oil is intended for use in two-and four-stroke diesel and marine die-sel engines of trunk piston type, operating on distillate fuels with sulfur content up to 0,5 % (mass fraction), as well as for engines of open- pit dump trucks. Also it can be used in south-ern areas as summer oil, instead of М-10V2.
М-10G2TsS, М-14G2TsS are intended for lubrication of the trunk piston and crosshead diesel ship engines, circulation systems of highly accelerated crosshead diesel engines, ship machinery and aggre-gates. M-14G2TsS is used in diesel engines such as CHN 26 / 26, stationary diesel generators (CHN 40 / 48), diesel reduction aggregates (CHN40 / 46).
М-16G2TsS is intended for lubricating of the trunk piston of cylinders (high degree of forcing), crosshead (low-speed) of diesel engines with not more than 1,5 % of sulfur in fuel.
Index name М-14V2 М-10G2TsS М-14G2TsS М-16G2TsS
Compliance with classifications SAE (API) 40 (СВ) 30 (СС) 40 (СС) 50 (СС)
Kinematic viscosity at 100°С, mm2/s 13,5–14,5 10,0–11,0 13,5–15,0 15,5–17,0
Viscosity index, not less than 85 92 92 92
Total Base Number, mg КОН/g, not less than 4,8 9,0 9,0 9,0
Temperature, °С: • Flash point in open crucible, not less than • Pour point, not more than
210–12
210–10
215–10
220–10
Sulphated ash, %, not more than 1,2 1,5 1,5 1,5
Emulsifiability with water, cm3, not more than – 0,3 0,5 0,5
Tribological characteristics on 4 balls machine at (20±5)°С: • Critical load, Н, not less than • Scuff index, Н, not less than • Wear index (196 Н), mm, not more than
7843630,4
8233330,4
8233330,4
8233330,4
GOST 12337-84М-14V2
М-10G2TsS, М-14G2TsS
М-16G2TsS
Oils for 2- and 4-stroke engines of small machinery Oils for marine and locomotive engines
-
20 21
www.agrinol.com.uawww.agrinol.com.ua
Agrinol M-14D2U, Agrinol М-14D2 — motor mineral oils for lubricating of marine, locomotive, stationary, transport and industrial diesel engines, as well as heavy-duty diesel engines, mining vehicles and diesel rigs requiring oils of D2 group.
Index name Agrinol М-14D2U Agrinol М-14D2
Compliance with classifications SAE (API) 40 (CD) 40 (СD)
Kinematic viscosity at 100°С, mm2/s 13,5–14,5
Viscosity index, not less than 85 90
Total Base Number, mg КОН/g, not less than 13,0
Temperature, °С: • flash point in open crucible, not less than • pour point, not more than
220–12
230–12
Sulphated ash, %, not more than 2,0 1,8
Mass fraction of active elements, %, not less than: • calcium • zinc • phosphorus
0,450,100,10
Tribological characteristics on 4 balls machine at (20±5)°С: • critical load, Н, not less than • scuff index, Н, not less than • wear index (196 Н), mm, not more than
8234210,40
М-14DTsL20, М-14DTsL30 oils are used for greasing medium-trunk-piston marine diesel engines with a combined circulation or lubrication system and in-dustrial engines, gearboxes, tools and other units operating on fuel with a sulfur content of 2.5-3.5%.
М-20Е70 oil is used for lubrication of the major low-speed marine diesel engines during the work on low-sulfur heavy fuels (with sulfur content up to 4,5%).
М-20V2F — seasonal oil for marine diesel engines of 12CHN 18/20 and CHN 16/17 type, working with extended terms of oil change in difficult conditions, conducive to the formation of high tempera-ture deposits.
Index name М-14DTsL20 М-14DTsL30 М-20Е70 М-20V2F
Compliance with classifications SAE (API) 40 (CD) 40 (СD) 50 (CB) 50 (CB)
Kinematic viscosity at 100°С, mm2/s 13,5–15,0 13,5–15,0 20,0–23,0 19,0–22,0
Viscosity index, not less than 92 92 90 90
Total Base Number, mg КОН/g, not less than 18 27 70 2,8
Temperature, °С: • flash point in open crucible, not less than • pour point, not more than
220–10
210–10
200–12
230–15
Sulphated ash, %, not more than 3,0 4,6 10,5 0,65
Emulsifiability with water, cm3, not more than 1,0 1,0 0,3 –
Mass fraction of active elements, %, not less than: • calcium • zinc • phosphorus
0,650,0450,040
1,00,0450,040
2,8––
0,08–
0,03
Tribological characteristics on 4 balls machine at (20±5)°С: • critical load, Н, not less than • scuff index, Н, not less than • wear index (196 Н), mm, not more than
8333330,5
–––
9803920,3
8233530,32
GOST 12337–84М-14DTsL20, М-14DTsL30
М-20Е70
М-20V2F
TS U 23.2-36451680-144:2010Agrinol М-14D2U, Agrinol М-14D2
Oils for marine and locomotive enginesOils for marine and locomotive engines
-
22 23
www.agrinol.com.uawww.agrinol.com.ua
TRANSMISSION oils series consists of transmission multigrade oils, which are used for greasing of all types of gears: cylindrical, conical, spiral bevels and hyp-oid gears of cars, trucks, buses, tractors; road and construction equipment.
Transmission Oil Classic SAE 80W-90 API GL-4 is intended for greasing mechanical transmissions, cars, lorries and mobile equipment, as well as other sites where level of API GL-4 (TM-4) oil is recom-mended.
Transmission Silver SAE 85W-90 API GL-5, Transmission Gold SAE 80W-90 API GL-5 and Trans-mission Platinum SAE 75W-90 API GL-5 oils are designed for lubrication of mechanical transmissions with all types of gears, including hypoid. Can be used in driving axles and transfer boxes of passenger cars, trucks and other mobile equipment operating in the most demanding conditions, where oil of API GL-5 (ТМ-5) level is needed.
Index nameTransmission
Classic 80W-90 GL-4
Transmission Silver
85W-90 GL-5
Transmission Gold
80W-90 GL-5
Transmission Platinum
75W-90 GL-5
Kinematic viscosity at 100°С, mm2/s, not less than 16,5 17,5 17,5 13,5
Viscosity index, not less than 95 95 95 95
Temperature,°С: • flash point in open crucible, not less than • pour point, not more than
200–20
210–15
200–20
185–25
Mass fraction of sulfur, %, not less than 0,8 1,0 1,0 1,0
Corrosive effect on metals Withstands
Tribological characteristics on 4 balls machine at (20±5)°С: • welding load, Н, not less than • scuff index, Н, not less than • wear index (196 Н), not more than
34794900,5
36875680,4
36875680,4
32834900,4
TS U 23.2-30802090-120:2009Premium groupAgrinol М-14B is a mineral engine oil used for lubrication of two-and four-stroke
diesel engines of 2D100, D-50 types and similar to them in terms of boosting shunting and industrial locomotives.
Agrinol МТ-16P is a seasonal mineral oil for greasing of diesel engines of B2 type vehicles and its analogs in terms of forcing the naturally aspirated diesel engines: au-tomotive diesel engines of old models, marine, locomotive, stationary and transport naturally aspirated diesel engines.
М-20G2 — season mineral engine oil used for greasing of high-speed vessels, die-sel and other diesel engines. Provides lubrication for two-stroke diesels of MD 23/2×30 type.
Index name Agrinol М-14B Agrinol МТ-16P М-20G2
Compliance with classifications SAE (API) 40 (–) 40 (СВ) 50 (СС)
Kinematic viscosity at 100°С, mm2/s 14,0±0,5 15,5–16,5 not less than 20,0
Viscosity index, not less than 85 85 85
Total Base Number, mg КОН/g, not less than 1,0 4,0 9,0
Temperature, °С: • flash point in open crucible, not less than • pour point, not more than
200–15
210–25
235–15
Sulphated ash, %, not more than 1,0 0,6–1,0 1,9
Mass fraction of active elements, %, not less than: • calcium • zinc • phosphorus
–––
–––
0,360,050,05
Tribological characteristics on 4 balls machine at (20±5)°С: • critical load, Н, not less than • scuff index, Н, not less than • wear index (196 Н), mm, not more than
––
0,6
––
0,45
8233630,35
TS U 23.2-36451680-145:2010
TS U 23.2-30802090-122:2009
GOST 12337–84
Agrinol М-14B
Agrinol МТ-16P
М-20G2
Oils for marine and locomotive engines Transmission oils
-
24 25
www.agrinol.com.uawww.agrinol.com.ua
Oil ТАp-15V is intended for greasing of transmissions of trucks, road construc-tion equipment and gears (spur, spiral bevel gearings and worm-type gears where the contact stresses are up to 2000 MPa and oil temperature is up to 130 °C). In the middle climatic zone this oil is used all year-round at temperatures up to minus 25 °C.
ТAD-17i oil is intended for greasing of all types of gears (including hypoid) of cars and other mobile equipment. Multigrade oil, operates at temperatures up to minus 30 °С. The upper limit of continuous performance is 140 °C.
Index name ТАp-15V ТАD-17i
Compliance with classifications SAE (API) 90 (GL-3) 85W-90 (GL-5)
Kinematic viscosity, mm2/s: • at 50°С • at 100°С
–15,0±1,0
110–120not less than 17,5
Viscosity index, not less than – 100
Corrosion test (for 3 hours): • at 100°С (steel and copper plates) • at 120°С (copper plates), points, not more than
Withstands–
–2с
Temperature,°С: • flash point in open crucible, not less than • pour point, not more than
185–20
200–25
Tribological characteristics on 4 balls machine at (20±5)°С: • scuff index, Н, not less than • critical load, Н, not less than • wear index (392 Н), mm, not more than
3283490
–
36875680,40
GOST 23652–79Agrinol MULTIPLEX GL-5 SAE-90 is a universal gear oil used for lubrication
of reducers of rolling mills, mechanical transmissions with all types of gears in-cluding hypoid (drive axles, transfer cases, etc) of cars, trucks and tractors, metallurgical equipment, which operate under severe conditions, where oils of ТМ-5 (API GL-5) level are needed.
Index name Agrinol MULTIPLEX GL-5 SAE-90
Kinematic viscosity, not less than • at 100°С, mm2/s • at 40°С, mm2/s
18200
Viscosity index, not less than 90
Acid number, mg КОН/1g, not more than 1,2
Color on CNT colorimeter with 15/85 dilution, CNT units, not more than 6
Temperature, °С: • flash point in open crucible, not less than • pour point, not more than
215– 25
Mass fraction: • mechanical impurities, %, not more than • water, %, not more than • phosphorous, %, not less than
0,01Absence
0,04
Corrosive effect on metals Withstands
Tribological characteristics on 4 balls machine at (20±5)°С: • critical load, Н, not less than • welding load, Н, not less than • scuff index, Н, not less than • wear index (196 Н), not more than
98041356000,4
TS U 23.2-36451680-153:2010Agrinol MULTIPLEX GL-5SAE-90
Transmission oils in accordance with GOST 23652-79
Transmission oils Transmission oils
-
26 27
www.agrinol.com.uawww.agrinol.com.ua
Agrinol Nigrol oils are used as working liquids for gearboxes, easy-load-ed units of industrial equipment, open toothed gears, planetary toothed gears of cranes and excavators, toothed gears and transmission units of industrial equipment, tractors, agri-cultural and road-building machines, constructing devices.
Operating temperature range of Agrinol Nigrol-L:– grade A: from minus 5°С to 110°С;– grade B: from 0°С to 140°С.Operating temperature range of Agrinol Nigrol-Z:– grade А: from minus 12°С to 110°С;– grade B from minus 10°С to 140°С.
Index nameArginol Nigrol-Z Agrinol Nigrol-L
Grade A Grade B Grade A Grade B
Compliance with classifications SAE (API) 90 (GL-1) 90–140 (GL-1)
Appearance Homogenous black liquid
Kinematic viscosity at 100°С, mm2/s 18–22 27–34
Temperature,°С: • flash point in open crucible, not less than • pour point, not more than
140–12
180–10
140–5
1800
Mass fraction, %, not more than: • mechanical impurities • water
0,05Traces
Corrosive effect on metals Withstands
TSp-10 oil is intended for greasing of heavily loaded cylindrical, bevel and spiral bevel gears operating under the contact stresses up to 1500 2000 MPa and temperatures of oil in volume up to (100-110)°С.
Product is a winter oil, operational at the temperatures up to minus 45°С.TSp-15K oil is a multigrade transmission oil for greasing of heavily loaded cylindrical, bevel and spi-
ral-bevel gears of KamAZ heavy-vehicles. Operates at temperatures up to minus 30°С.TSp-14gip oil is used in hypoid gears of trucks. It is a multigrade oil, operational at the temperatures
up to minus 30°С.
Index name ТSp-10 ТSp-15К ТSp-14gip
Compliance with classifications SAE (API) 80 (GL-3) 90 (GL-3) 90 (GL-5)
Kinematic viscosity, mm2/s: • at 100°С, not less than 10,0 15,0±1,0 14,0
Viscosity index, not less than 90 85
Corrosion test (for 3 hours): • at 100°С (steel and copper plates) • at 120°С (copper plates), points, not more than
Withstands–
–2с
Withstands–
Temperature,°С: • flash point in open crucible, not less than • pour point, not more than
128–40
191–25
215–25
Tribological characteristics on 4 balls machine at (20±5)°С: • scuff index, Н, not less than • critical load, Н, not less than • wear index (392 Н), mm, not more than
3479470
–
34795390,50
3920588
–
GOST 23652–79ТSp
TS U 23.2-30802090-021:2002Transmission oils for industrial an obsolete equipment
Transmission oils Transmission oils for industrial an obsolete equipment
-
28 29
www.agrinol.com.uawww.agrinol.com.ua
Automatic transmission fluid Oils for hydromechanical transmissions
Agrinol A oil is used for multigrade exploitation in torque converters, auto-matic transmissions at the environmental temperatures up to minus 35°С. Product can be used as winter oil in the hydrostatic drives of self-propelled agricultural and other machinery.
Agrinol R oil is used in systems of wheel hydrostrengthenings and hydrostatic transmissions at the environmental temperature up to minus 40°С.
Special Oil HMT is used for multigrade exploitation in torque converters, au-tomatic transmissions, and hydrostatic transmissions at the environmental tem-peratures up to minus 5°С.
Index name Agrinol А Agrinol R Special Oil HMT
Compliance with classifications ISO VG (ISO 6743)32
(Automatic transmission fluid)
22(Automatic transmission
fluid)
32(Automatic transmission
fluid)
Kinematic viscosity, mm2/s: • at 40°С • at 100°С
30–45not less than 6,5
17–22not more than 5,0
30–45not less than 6,5
Viscosity index, not less than 90 90 105
Temperature, °С: • flash point in open crucible, not less than • pour point, not more than
175–40
163–45
190–40
Mass fraction, %, not more than: • mechanical impurities • water
0,01Absence
Mass fraction of active elements, %, not less than: • calcium • zinc
0,160,08
0,160,8
0,160,08
Corrosive effect on metals Withstands
Ash content, %, not less than 0,60 0,60 0,60
Agrinol ATF ІІD is a mineral oil used in automatic gearboxes, transmissions, in power assisted steering of cars and trucks, buses, tractors, road and construc-tion machinery, special equipment in accordance with the instructions of the manufacturers of vehicles and where oils with specifications of GM Dexron IID, Mercon, Caterpillar TO-2, Volvo 97 335 are needed.
Agrinol ATF ІІI is a semi-synthetic oil used in automatic gearboxes, transmissions, in power as-sisted steering of cars and trucks, buses, tractors, road and construction machinery, special equipment in accordance with the instructions of the manufacturers of vehicles and where oils with specifications of GM Dexron IIІ, Mercon V, MAN 339 type V-1, MAN 339 type Z-2, Caterpillar TO-2, Volvo 97340, ZF TE-ML-04D -14B, -16L, -17L are needed.
Index name Agrinol ATF ІІD Agrinol ATF ІІI
Kinematic viscosity at 100°С, mm2/s, not less than 7,5±0,5
Viscosity index, not less than 150 170
Temperature,°С: • flash point in open crucible, not less than • pour point, not more than
185–42
175–45
Corrosive effect on metals, points, not more than 1B
Sulphated ash, %, not more than 0,1
Mass fraction, %, not less than: • sulfur, %, not less than • mechanical impurities, %, not less than
0,4Absence
0,1Absence
Tribological characteristics on 4 balls machine at (20±5)°С: • wear index (314 Н), mm, not more than 0,5
TS U 23.2-36451680-134:2010Automatic Transmission Fluid
TS U 23.2-30802090-047:2005
TS U 23.2-36451680-165:2011
Agrinol А
Agrinol Р
Special Oil HMT
-
30 31
www.agrinol.com.uawww.agrinol.com.ua
Hydraulic oil Agrinol VMGZ is used as a winter oil. In Arctic conditions it is used as а year-round working liquid in hydraulic drives and hydraulic control sys-tems of constructing, road, logging, lifting and other machines and mechanisms exploited in the open air at the working temperature of oil from minus 55 °С up to 80 °С.
AMG-10 oil is designed for use as a working fluid for hydraulic devices op-erating in the range of environmental temperatures from minus 60°С to +55 °С.
Spindle oil Agrinol AU is intended for use in lightly loaded hydraulic systems of mobile equipment with gear and piston pumps, working under pressure up to 15 MPa and maximum oil temperature up to 100°С.
Oil supports the work of hydraulic drives in the temperature range from minus 35°С to plus 100°С.
Index name AMG-10 Agrinol VMGZ Agrinol AU
Compliance with classifications ISO VG ISO 6743 // DIN 51524
Designation according to GOST 17479.3
15 HL // HLPМГ-15-Б
15 HM // HLPМГ-15-В
22НН
МГ-22-А
Kinematic viscosity, mm2/s:• at 40°С, not less than• at 50°С, not less than• at minus 40°С, not more than• at minus 50°С, not more than
-10-
1250
-10
1500-
16,0-22,0-
30000-
Viscosity index, not less than 140
Temperature, °С:• flash point in open crucible, not less than• pour point, not more than
93-70
135-60
163-45
Mass fraction, %, not more than:• mechanical impurities• water
0,003Absence
AbsenceAbsence
AbsenceAbsence
Mass fraction of zinc, %, not less than 0,01
Ash content, %, not more than - 0,2 0,005
Acid number, mg КОН/g Not more than 0,03 0,40–1,0 0,07
Hydraulic low-temperature oils
Agrinol VMGZ
AMG-10
Agrinol AU TS U 23.2-30802090-124:2009
GOST 6794–75
Turbine oils with additives TP-22, TP-30 and TP-46 are intended for lubricating and cooling bearings of such various turbo-units as steam and gas turbines, water turbines, turbocompressor machines, ship steam turbine units and other analogous types of equipment.
These oils are also used as working liquids for turbo-units’ regulating systems, circulating and hy-draulic systems of diverse industrial mechanisms.
Product is used for lubrication and cooling of gears and bearings of marine gas turbines.
Index name For marine gas turbines TP-22 TP-30 TP-46
Compliance with classifications ISO VG - 32 46 68
Kinematic viscosity, mm2/s:• at 4°С, not less than• at 50°С, not less than
-7,0-9,6 (50°С)
28,8–35,2-
41,4–50,6-
61,2–74,8-
Viscosity index, not less than - 90 95 90
Acid number, mg КОН/g, not more than 0,02 0,05 0,5 0,5
Temperature, °С:• flash point, not less than • fluidity, not more than• pour point, not more than
135 (in closed crucible)-
-45
1866
-15
1906
-10
2206
-10
Ash content of base oil, %, not more than - 0,005
Ash content, % not more than 0,005 -
Anti-corrosion properties, steel (copper, group) - Absence ( 1 )
Demulsification number, min, not more than - 3,0 3,5 3,0
Oxidation stability: • sediment, %, not more than• acid number, mg КОН/g, not more than
0,200,65
0,030,3
0,030,4
0,11,5
Hydraulic low-temperature oils
TP, turbine oils
SGT, oil for marine gas turbines GOST 10289-79
TS U 23.2-30802090-067:2006 GOST 9972-74
-
32 33
www.agrinol.com.uawww.agrinol.com.ua
The lubricating oil Agrinol МS-8p is intended for usage in hydraulic and lubri-cating and cooling systems of gas-turbine units, gas-pumping units, equipment of gas pipelines and other industrial equipment. The oil is efficient at the temperature varying from minus 40°С to 80°С
Index name AMG-10
Kinematic viscosity, mm2/s:• at 50°С, not less than• at minus 40°С, not less than
84000
Acid number, mg КОН/g, not more than 0,05
Temperature, °С:• flash point in open crucible, not less than• pour point, not more than
150-55
Mass fraction, %, not more than:• mechanical impurities• water• sulfur
AbsenceAbsence
0,5
Corrosion on the plates after oxidation, mg/cm2, not more than: • steel ShH 15• copper М1 and М2• aluminum alloy АК4
Absence+0,2
Absence
Oxidation resistance, not more than:• Kinematic viscosity at 50°С, mm2/s• Kinematic viscosity at minus 40°С, mm2/s• acid number, mgКОН/g• mass fraction of insoluble residue, %
10,055000,7
0,15
Tribological characteristics on 4 balls machine at (20+5°С):• critical load, Н, not less than• diameter of the wear spot, 196Н, not more than
4900,55
Hydraulic low-temperature oils
Agrinol MS-8p Kompressoil VG oil is intended for greasing of pistons (cross-head, without cross-head, single and multistage) and rotary air compressors working permanent-ly at 220°С on a blowing line.
Low-viscosity versions of «Kompressoil VG» oils are used in rotary compressors (in accordance with the recommendations of manufacturers of compressors).
Index nameKompressoil
VG 46 VG 68 VG 100 VG 150 VG 220 VG 320
Compliance with classifications ISO VG
DIN 51506 46
VDL68
VDL100VDL
150VDL
220VDL
320VDL
Kinematic viscosity at 100°С,mm2/s42,0-50,0
6,5-7,561,0-75,0
7,5-9,090,0-110,0
9,5-12,0130,0-160,0
12,5-15,5200,0-240,0
17,0-20,0300,0-350,0
22,0-25,0
Viscosity index, not less than 90 90 90 90 90 90
Acid number, mg КОН/g, not more than 0,2 0,2 0,2 0,2 0,2 0,2
Temperature, °С:• flash point in open crucible, not less than• pour point, not more than
210-20
220-20
225-20
230-20
235-20
240-20
Mass fraction of sulfur, %, not more than 0,3 0,5 0,5 0,5 0,5 0,5
Oxidation stability: • sediment, %, not more than 0,02 0,02 0,02 0,02 0,02 0.02
Corrosive effect on metals Withstands
Color with dilution 15/85, CNT units, not more than 1,5
COMPRESSOR OILS
Kompressoil VG
TS U 23.2-30802090-076:2007 TS U 23.2-36451680-156:2010
-
34 35
www.agrinol.com.uawww.agrinol.com.ua
Agrinol KS-19p is oil for compressor units. It is intended for greasing of pis-ton and rotary compressors of average and high pressure.
Compressor oil of selective refinement KS-19 is intended for lubrication of piston and rotary compressors as well as for blast-engines.
Compressor oils K-12 and K-19 are produced from low-sulfur crude oils and are used for lubricating piston and rotary compressors and blowers.
Index name Agrinol KS-19p KS-19 K-12 K-19
Compliance with classifications ISO VG ISO 6743 /3В ( DIN 51506 )
220DAB ( VDL )
220DAA ( VB )
100/150DAA ( VC )
220DAA ( VC )
Kinematic viscosity at 100°С,mm2/s 18–24 18–22 11–14 17–21
Viscosity index, not less than 90 92 -
Acid number, mg КОН/g, not more than 0,03 0,02 0,15 0,04
Temperature, °С:• flash point in open crucible, not less than• pour point, not more than
240-15
260-15
216-25
245-5
Mass fraction, %, not more than:• mechanical impurities• water
AbsenceTraces
AbsenceAbsence
0,007Absence
Коксуемость, %, не более – 0,5 0,3 0,5Oxidation stability:
• sediment, %, not more than• acid number, мг КОН/г, not more than
Absence 0,5
Absence 0,5
0,25-
0,015-
Corrosive effect on metals Withstands – Withstands
Corrosion on plates of the lead, g/m2, not more than – 10 -
COMPRESSOR OILS
Agrinol KS-19p
KS-19 K-12 and K-19
Agrinol Refoil 10КС oil is designed for lubrication of compressors of house-hold refrigeration techniques, which running on hydrocarbon refrigerant - isobu-tane (R600).
HF-30 oil is intended for greasing of compressors of refrigeration machines running on ammonia or carbonic acid.
HF 12-16 and HF 22-24 are used for greasing of compressors of refrigeration machines running on freon.
Index name Agrinol Refoil 10KS HA-30 HF 12-16 HF 22-24
Compliance with classifications ISO ( DIN 51503 ) 10 (KS) 46 (KA) 22 (KS) 32 (KS)
Kinematic viscosity, mm2/s:• at 20°С• at 40°С• at 50°С
-8,0-12,0
-
120,0–150,0-
28–32
–-
Not less than 17
--
24,5-28,4
Acid number, mg КОН/g, not more than 0,02 0,05 0,02 0,04
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than• Flocculation of oil mixed with Freon, not more than
144-57
-
185-38–
174-42-50
130-55
-
Oxidation stability: • sediment, %, not more than• acid number, mg КОН/g, not more than
--
0,020,5
0,0050,04
--
Ash content, %, not more than 0,005 0,004 – -
Mass fraction, not more than:• mechanical impurities, %• water• water soluble acids and alkalis, %
Absence50-
AbsenceAbsenceAbsence
COMPRESSOR OILS for REFRIGERATING MACHINES
«Agrinol Refoil»
HA-30
HF 12-16, HF 22-24
TS U 23.2-30802090-017-2003 TS U 23.2-36451680-149:2010
GOST 9243-75
GOST 1861-73
GOST 5546-86
-
36 37
www.agrinol.com.uawww.agrinol.com.ua
Agrinol MGD-14m oil is used in gas-engine compressors. It is used for greas-ing of motors and compressor parts of such types of gas-engine-compressors as 8GK, 8GKM, 10 GKM, 10GKN as well as similar units running on natural gas.
Index name Agrinol MGD-14m
Kinematic viscosity at 100°С, mm2/s, not less than 13,5–15,5Viscosity index, not less than 90Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
220-15
Mass fraction, %, not more than:• mechanical impurities• water• sulphated ash
0,015Traces
0,2
Total Total Base Number, mg КОН/g, not less than 2Corrosive effect on metals WithstandsOxidation stability: • mass fraction of sediment in the oxidized oil,%, not more than• Acid number after oxidation, mg KOH/g, not more than
0,20,5
Стабильность по ИПО в течение 35 часов, прирост вязкости при 100°С, %, не более 60Tribological characteristics on 4 balls machine at (20±5)°С:• scuff index, Н, not less than• critical load, Н, not less than • welding load, Н, not less than
300784
1568
COMPRESSOR OILS for Gas-Transit Units
Agrinol MGD-14m Transformer oils T-1500 and TK are sulfuric and solvent refined oils produced from low-sulfur crude oils. These products are used as oil circuit breakers (and in other high-voltage equipment as the primary insulating material).
Index name Т-1500 TKKinematic viscosity, mm2/s:
• at 50°С• at 20°С• at minus 30°С
8–
1100
830–
Acid number, mg КОН/g, not more than 0,01 0,05
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
135-45
135-45
Mass fraction, %, not more than:• mechanical impurities• water• water soluble acids and alkalis• phenol• sulfur
AbsenceAbsence
--
Dielectric dissipation factor, %, not more than 0,5 (at 90°С) 2,5 (at 70°С)
Oxidation stability: • mass fraction of sediment in the oxidized oil,%, not more than• Acid number after oxidation, mg KOH / g, not more than
Отсутствие0,2
0,10,35
TRANSFORMER OILS
Т-1500 and ТK transformer oils
TS U 23.2-30802090-035:2005 GOST 982-80
-
38 39
www.agrinol.com.uawww.agrinol.com.ua
ТSО transformer oil is used to fill transformers and other oil-filled electrical equipment.
Agrinol GK transformer oil is used with electrical equipment of highest classes of electrical voltage.
Application temperature ranges from minus 35°С to 100°С.
Index name TSO Agrinol GK
Kinematic viscosity, mm2/s:• at 50°С• at 20°С• at minus 30°С
928
1300
9-
1200
Acid number, mg КОН/g, not more than 0,02 0,01
Temperature, °С:• Flash point in closed crucible, not less than• Pour point, not more than
150-45
135-45
Mass fraction, %, not more than:• mechanical impurities• water• water soluble acids and alkalis• phenol• sulfur
Absence-
AbsenceAbsence
0,6
AbsenceAbsence
---
Dielectric dissipation factor at 90°С, %, not more than 1,7 0,5
Oxidation stability: • mass fraction of sediment in the oxidized oil,%, not more than• Acid number after oxidation, mg KOH/g, not more than
Absence0,1
0,0150,1
TRANSFORMER OILS
Transformer oil of selective treatmentAgrinol GK Transformer oil
Agrinol KM-22 is intended for manufacturing of insulating impregnating compositions of voltage power cables of 1 – 35 kV with a paper soaked insulation. Main consumers of the oil are enterprises of electric industry.
Index name Agrinol KM-22
Kinematic viscosity at 100°С, mm2/s, not less than 22,0Acid number, mg КОН/g, within 0,03
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
270-10
Mass fraction, %, not more than• mechanical impurities• ash• water
Absence0,007Traces
Coking ability, %, not more than 0,6Dielectric strength at (25 ± 10) °С and with frequency of the AC 50 Hz, MV/M, not less than 15
Volume resistivity at 100 °C and a voltage more than 100 V, Ohm•m, not less than• in place of manufacturing• in place of consumption
2,0*1010
1,5*1010
CABLE OILS
Agrinol KM-22GOST 10121-76 TS U 23.2-30802090-126:2009
TS U 23.2-30802090-113:2009
-
40 41
www.agrinol.com.uawww.agrinol.com.ua
Hydroil HM –10, -22, -32, -46, -68, -80 oils are used as a working liquid for hydraulic actuators, hydraulic transmissions, and circulating oil systems of differ-ent units, low-and moderate gears and worm gears, variable, electromagnetic, and gear couplings, bear-ing units, sliding guides and bearings, and other sites of the machinery of modern industrial equipment. Products does not contain chlorine compounds.
Index name Hydroil HM 10Hydroil HM
22Hydroil HM
32Hydroil HM 46
Hydroil HM 68
Hydroil HM 80
Compliance with classifications ISO VG ISO 6743 // DIN 51524.2
10 HM // HLP
22 HM // HLP
32 HM // HLP
46 HM // HLP
68 HM // HLP
80 HM // HLP
Kinematic viscosity at 40°С, mm2/s 8-14 18-26 28-36 42–50 61-75 76-85
Viscosity index, not less than 108 100 98 97 94 92Acid number, mg КОН/g, within 0,7
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
160-30
170-27
190-24
200-24
210-24
215-20
Ash content, %, not more than 0,2Color with dilution 15/85, CNT units, not more than 1,0 1,5
Mass fraction of sulfur, %, not more than 0,5 0,8
INDUSTRIAL OILS
HYDRAULIC OILS PREMIUM GROUP Hydroil НМ
TS U 23.2-30802090-114:2009
The last tendencies of continuous improvement of gearboxes and hydrodrives have special requirements for circulating oils used in machinery, commercial vehicles, special equipment and other branches of modern industry. Therefore “Agrinol” company extended it’s industrial line of PREMIUM-class hydraulic oils with series of zinc-free Hydroil Ultra HM oils and Agrinol Hydraulic Lift series, which provide reliable performance of hydraulic drives.
A series of Highrate XP gear oils consists of high quality oils for lubrication of heavy industrial gearboxes. Its high bearing capacity and antifriction characteristics offer exceptional performance in gears and other industrial nodes, provide equipment operation under increased flooding, high loads and temperatures.
The use of PREMIUM-series circulating oils is mostly justified in equipment, that operates at high temperatures, ex-treme temperature changes, cyclic loads, round the clock operation cycle.
-
42 43
www.agrinol.com.uawww.agrinol.com.ua
Hydroil HM –100, -120, -150, -200, -270, -330 oils are used as a working liq-uid for hydraulic actuators, hydraulic transmissions, and circulating oil systems of different units, low-and moderate gears and worm gears, variable, electromagnetic, and gear couplings, bearing units, sliding guides and bearings, and other sites of the machinery of modern industrial equip-ment. Products does not contain chlorine compounds.
Index name Hydroil HM 100Hydroil HM
120Hydroil HM
150Hydroil HM 200
Hydroil HM 270
Hydroil HM 330
Compliance with classifications ISO VG ISO 6743 // DIN 51524.2
100 HM // HLP
120 HM // HLP
150 HM // HLP
200HM // HLP
270 HM // HLP
330 HM // HLP
Kinematic viscosity at 40°С, mm2/s 90-110 110-125 148-165 186-205 265-280 320-348
Viscosity index, not less than 91 90 90 90 90 90Acid number, mg КОН/g, within 0,7
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
220-18
220-15
225-15
230-15
230-15
240-15
Ash content, %, not more than 0,2Color with dilution 15/85, CNT units, not more than 1,5 2,0Mass fraction of sulfur, %, not more than 0,8 1,0
INDUSTRIAL OILS
Hydroil НМTS U 23.2-30802090-114:2009
Oil Hydroil HM Ultra is used as the working fluid for hydraulic actuators, hy-draulic transmissions and circulating oil systems of different units, low-and mod-erately loaded gearboxes and worm gears, CVTs, electromagnetic clutches and gear, bearing units, sliding and rolling rails and the other nodes in the machinery of modern industrial equipment.
For hydraulic systems, which cannot contain Zn-based additives.
Index name Hydroil HM Ultra 22Hydroil HM
Ultra 32Hydroil HM
Ultra 46Hydroil НM
Ultra 68Hydroil HM Ultra 100
Compliance with classifications ISO VG ISO 6743 // DIN 51524.2
22 HM // HLP
32 HM // HLP
46 HM // HLP
68 HM // HLP
100 HM // HLP
Kinematic viscosity at 40°С, mm2/s 18-26 28-36 42–50 61-75 90-110
Viscosity index, not less than 100 100 100 95 91Acid number, mg КОН/g, within 0,3
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
170-30
190-30
205-30
210-25
220-20
Ash content, %, not more than 0,1Color with dilution 15/85, CNT units, not more than 1,0 1,5Tribological characteristics in 4 balls machine (20±5)°С:• Diameter of the wear spot (296 Н), mm, not more than 0,4
ZINC-FREE HYDRAULIC OILSHYDRAULIC OILS OF PREMIUM GROUPHydroil НМ Ultra
TS U 23.2-36451680-155:2010
-
44 45
www.agrinol.com.uawww.agrinol.com.ua
Agrinol Hydraulic Lift oils are designed for use as working fluids for hydrau-lic drives, hydraulic transmissions and circulating oil systems of different indus-trial units and machinery operating under extreme loads (pressures above 25 MPa).
Index name Hydraulic Lift 22Hydraulic
Lift 32Hydraulic
Lift 46Hydraulic
Lift 68Hydraulic Lift
100
Compliance with classifications ISO VG
ISO 6743 // DIN 51524.2
22 HV /HVLP
32 HV /HVLP
46 HV // HVLP
68 HV/HVLP
100 HV//HVLP
Kinematic viscosity at 40°С, mm2/s 18-26 28-36 41–51 61-75 90-110
Viscosity index, not less than 130Acid number, mg КОН/g, within 0,5-1,0
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
160-40
170-40
180-40
190-38
200-38
Ash content, %, not more than 0,2Color, CNT units, not more than 4,5 5,0 5,5 5,5 6,0Mass fraction of water, %, not more than AbsenceMass fraction of mechanical impurities, %, not more than AbsenceCorrosive effect on metals Withstands
PREMIUM GROUP
Agrinol Hydraulic Lift
TS U 23.2-36451680-154:2010Oils Agrinol I-HG-B -32, -46, -68, -80 are used as the working fluid in the
hydraulic systems of machine equipment, automated lines, presses; construction, agricultural and road machines, as well as for lubrication of light and moderate gears, slideways and roll-ing machines, where oils with high antioxidant properties are required.
Наименование показателяАгринол I-HG-B
32 46 68 80Compliance with classifications
ISO VG ISO 6743DIN 51524.2 32 HM (HLP) 46 HM (HLP) 68 HM (HLP) 80 HM (HLP)
Kinematic viscosity at 40°С, mm2/s 29–35 41–51 61–75 76-89
Acid number, mg КОН/g, not more than 1,0 1,0 1,0 1,0
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
200
-15
210
-15
220
-15
220
-15
Mass fraction, %, not more than: • Mechanical impurities• Water
AbsenceTraces
Stability against oxidation:• Changes in acid number after oxidation, mg КОН/g, not
more than0,3 0,4 0,4 0,4
Corrosive effect on metals Withstands
INDUSTRIAL OILS FOR HYDRAULIC SYSTEMS
Agrinol I-HG-B TS U 30802090.003-2000
-
46 47
www.agrinol.com.uawww.agrinol.com.ua
Agrinol I-HG-B -100, -120, -150, -220 oils are used as working liquids in hydraulic systems of machine equipment, automatic lines, presses, constructing, agricultural and road machines, as well as for greasing of medium- and heavy-loaded toothed and worm gears, gearboxes, reducers, slideways and bearings, circulating lubrication system of various equipment for mining, metallurgical and other industries, etc.
Index nameAgrinol I-HG-B
100 120 150 220Compliance with classifications
ISO VG ISO 6743DIN 51524.2 100 HM (HLP) 120 HM (HLP) 150 HM (HLP) 220 HM (HLP)
Kinematic viscosity at 40°С, mm2/s 90–110 110-125 146 - 165 198–288
Acid number, mg КОН/g, not more than 1,0 1,0 1,0 1,0
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
225
-15
225
-15
225
-15
225
-10
Mass fraction, %, not more than: • Mechanical impurities• Water
AbsenceTraces
Stability against oxidation:• Changes in acid number after oxidation, mg КОН/g,
not more than0,4 0,4 0,4 0,5
Corrosive effect on metals Withstands
INDUSTRIAL OILS FOR HYDRAULIC SYSTEMS
Agrinol I-HG-BTS U 30802090.003-2000
Highrate XP oil series is designed for the lubrication of all types of toothed, worm and helical gears and gear units with closed circulatory systems of lubrica-tion. Product also can be used for the lubrication of various industrial spray equipment: metal cutting and woodworking machines, presses, casting and molding machines, rolling mills, mixers, dryers, extrud-ers, fans, crushers, pumps, conveyors, elevators, lifts, rotary kilns, calenders, machines for paper produc-tion, coal combines, etc.
In ship equipment oil is used to lubricate gears, centrifuges, winches, windlasses, cranes, rotating machinery, pumps, hoists and lifting equipment of steering mechanism.
Index name Highrate XP 68Highrate XP 100
Highrate XP 150
Highrate XP 220
Highrate XP 320
Highrate XP 460
Highrate ХP 680
Compliance with classifications ISO VG DIN 51517.3
68CLP
100CLP
150CLP
220CLP
320CLP
460CLP
680CLP
Kinematic viscosity at 40°С, mm2/s 61–75 90–110 140–160 190–240 300–350 420–510 610–750
Viscosity index, not less than 100 100 97 94 92 90 90
Acid number, mg КОН/g, not more than 2,0 2,0 2,5 3,0 3,0 3,5 3,5
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
210-24
220-24
225-24
230-18
230-15
240-12
245-12
Mass fraction, %, not more than: • Mechanical impurities• Water
0,01Traces
0,01Traces
0,01Traces
0,02Traces
0,03Traces
0,03Traces
0,05Traces
Tribological characteristics in 4 balls machine (20±5)°С:• Scuff index, Н, not less than • Index of wearout (196Н), mm, not more than 3920,45
3920,45
3920,45
4900,45
4900,40
4900,45
4900,45
GEAR OILSPREMIUM GROUPHIGHRATE XP
TS U 23.2-30802090-102:2009
-
48 49
www.agrinol.com.uawww.agrinol.com.ua
Special Oil ART gear oils are designed for lubrication of all types of toothed, worm and helical gears of various industrial equipment: met- a l cutting and woodworking machines, hammers, presses, casting and molding machines, winches, rolling mills, overhead cranes, conveyors, elevators, lifts, rotary cement ovens, calenders, equipment for the man-ufacture of paper, coal combines, textile and spinning machines and other equipment where high loads do
not allow using of oil without additives.
Index nameSpecial Oil ART
68 100 150 220 320 460 680
Compliance with classifications ISO VG
DIN 51517.3
68CLP
100CLP
150CLP
220CLP
320CLP
460CLP
680CLP
Kinematic viscosity at 40°С, mm2/s 61–75 90–110 140–160 200–240 300–340 430–490 650–710
Viscosity index, not less than 100 100 100 100 100 100 100
Acid number, mg КОН/g, not more than 0,05 0,05 0,05 0,05 0,05 0,05 0,05
Color with dilution 15/85, CNT units, not more than 3,0 3,0 4,0 4,0 5,0 5,0 6,0
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
210-20
210-20
220-18
230-18
240-15
240-15
250-12
Mass fraction, %, not more than: • Mechanical impurities• Water
0,01Traces
0,01Traces
0,01Traces
0,015Traces
0,015Traces
0,02Traces
0,02Traces
Stability against oxidation:• Changes in viscosity at 40оС, %, not more than• Changes in acid number, mg КОН/g, not more than
30,15
30,15
30,15
30,15
30,15
30,15
30,15
Tribological characteristics in 4 balls machine (20±5)°С:• Scuff index, Н, not less than • Index of wearout (196Н), mm, not more than
4900,5
4900,5
4900,5
4900,5
4900,5
4900,5
4900,5
GEAR OILS
Special Oil ARTTS U 23.2-36451680-166:2010
Industrial oils Agrinol I100PV are intended for greasing of liquid friction bearings of roller mills, equipped with circulating lubrication systems with long pipelines and branching, as well as with the oil line of small diameter, where ingress of water is possible.
The main consumers of oil are companies of steel industry.
Index name Agrinol I100PVAgrinol
I100PV s
Compliance with classifications ISO VG DIN 51517.1, 51517.2 100 С, CL 100 С, CL
Kinematic viscosity, mm2/s:• at 40°С• at 100°С
90,0–110,010,0–12,0
90,0–110,010,0–12,0
Viscosity index, not less than 95 95
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
205-10
205-10
Mass fraction, %, not more than: • mechanical impurities• water• sulfur
0,01Traces0,35
0,01Traces
0,6
Acid number, mg КОН/g, not more than 0,05 0,1
Demulsification number, min., not more than 13 13
Stability against oxidation, not more than: • increase in acid number, mg КОН/g 0,30 0,50
For ROLLING MILLS
Agrinol I100PVTS U 23.2-30802090-097:2008
-
50 51
www.agrinol.com.uawww.agrinol.com.ua
PS-28 is an oil, intended for lubrication of heavily loaded rolling mills with a circulating lubrication systems (other than liquid friction bearings).
Agrinol PS-20 and Agrinol PS-28z oils are used as lubricating oils for circu-lating greasing of systems of rolling mills, reducers, rolling equipment units of av-erage and heavy loading, equipment of tyre factories etc. (except bearings of fluid friction).
Index name PS-28Agrinol PS-20 Agrinol PS-28z
Mark А Mark B Mark А Mark B
Compliance with classifications ISO VG DIN 51517.1
460СВ
320 С
460 С
Kinematic viscosity at 100°С, mm2/s, not less than 26-30 18–23 26–31
Viscosity index, not less than 80 85 85
Acid number, mg КОН/g, not more than 0,02 0,03 0,04 0,02 0,04
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than 250-10
250-12
250-12
Mass fraction, %, not more than: • mechanical impurities• water
AbsenceAbsence
Mass fraction of sulfur, %, not more than 1,5 0,6 1,0 0,7 1,0
Coking ability, %, not more than - 0,8 0,8
Corrosive effect on metals Withstands
For ROLLING MILLS
Oil for rolling mills «PS-28»
Agrinol PS
GOST 12672-77
TS U 23.2-30802090-011-2002
Agrinol INSp-20, -40, -65, -110 oil series is designed for lubrication of slid-ing and rolling machine tools, heavy gears of drive screws of especially high pre-cision with program control, which require uniformity of the slow movement, accuracy and sensitivity of the displacement tables.
Oil Agrinol INSp-110 is designed for the lubrication of slideways of vertical and horizontal slide-ways with vertical faces of large area for gear and worm gears, ratchet mechanisms.
Index name Agrinol INSp-20 Agrinol INSp-40Agrinol INSp-65
Agrinol INSp-110
Compliance with classifications ISO VG (ISO 6743) 32 (G) 68 (G) 100 (G) 220 (G)
Compliance of brands with oils-equivalents - И-Н-Е-68 И-Н-Е-100 И-Н-Е-220Kinematic viscosity at 40°С, mm2/s, not less than 20-30 50–70 100–110 175–200Acid number, mg КОН/g, not more than 2,0
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
190-20
210-15
Mass fraction of water, %, not more than TracesColor, CNT units, not more than 6,0 6,5 7,0Ash content, %, within 0,15-0,25
Tribological characteristics in 4 balls machine (20±5)°С:• Scuff index, Н, not less than • Critical load, Н, not less than • Welding load, Н, not less than
286720
1960
333780
2200
355872
2200
372872
2450
OILS for SLIDEWAYS
Agrinol INSpTS U 23.2-36451680-147:2010
-
52 53
www.agrinol.com.uawww.agrinol.com.ua
Agrinol PZhT oil series is designed for lubrication of lubrication of horizontal and vertical liquid friction bearings of rolling mills equipped with circulating sys-tems with pipe-lines of various lengths and branching with possible irrigation.
Index name Agrinol PZhT-46Agrinol
PZhT-220Agrinol
PZhT-460Agrinol
PZhT-460U
Compliance with classifications ISO VG DIN 51517.1, 51517.2 46 С, CL 220 С, CL 460 С, CL 460 С, CL
Kinematic viscosity at 40°С, mm2/s, not less than 42–50 200–240 420–510 414–506
Viscosity index, not less than 95 90 90 95
Acid number, mg КОН/g, not more than 0,05 0,05 0,05 0,35
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
180-10
220-10
240-10
250-15
Coking ability, %, not more than 0,2 0,5 1,0 1,0
Demulsibility: • time of separation of emulsion, min, not more than• amount of layers: oil-water-emulsion, cm3
2042-36-2
2042-36-2
3042-36-2
1542-36-2
Stability against oxidation, not more than: • viscosity change, %• acid number change, mg КОН/g
50,1
100,15
100,4
100,4
Mass fraction of sulfur, %, not more than 0,6 0,6 0,6 0,5
Tribological characteristics in 4 balls machine (20±5)°С:• wearout index (196Н), mm, not more than • welding load, Н, not less than
0,75-
0,75-
0,75-
0,42067
OILS for LIQUID FRICTION BEARINGS
Agrinol PZhTTS U 23.2-30802090-008-2002
Heavy cylinder oils – petroleum oils, are intended for greasing of the recip-rocating steam engines of different purposes, working in superheated steam (C-38 up to 350°С, C-52 up to 400°С) under heavy loads and low speeds.
Index name Cylinder oil 38 Cylinder oil 52
Kinematic viscosity at 100°С, mm2/s, not less than 32–50 50–70
Viscosity index, not less than 60 80
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
30017
310-5
Mass fraction, %, not more than: • mechanical impurities• water• water soluble acids and alkalis
Absence0,05
Absence
0,070,05
Absence
Acid number, mg КОН/g, not more than 0,4 0,2
Coking ability, %, not more than 2,5
Ash content, %,not more than 0,015 0,01
Corrosive effect on metals Withstands
CYLINDER OILS
Heavy cylinder oils 38, 52
GOST 6411-76
-
54 55
www.agrinol.com.uawww.agrinol.com.ua
Agrinol МS-20 oil does not contain active additives. It is intended for the usage in industrial equipment of rolling mills, reducers and other equipment of metallurgical, mining, woodworking enterprises. For terrestrial applications.
Agrinol МS-20p and Agrinol МS-20ps oils are generally used as lubricating oils in those cases when high requirements to exploitation properties, especially for anti-deterioration and washing properties of oils are necessary.
Agrinol MS-20gk is intended for use as grease in the lubricating system of gas motor compressors 10GKNA, MK8 and / or in other similar units. Oil consumers are enterprises of metallurgy, mining, mining and timber industries, paper manufacturing companies.
Index name Agrinol MS-20Agrinol MS-20p
Kinematic viscosity at 100°С, mm2/s, not less than 20,5 20
Viscosity index, not less than 85 85
Acid number, mg КОН/g, not more than 0,03 0,04
Total Base Number, mg КОН/g – Not less than 0,9
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
240-13
230-15
Coking of oils, %, not more than 0,3 0,3
Sulphated ash, %,not more than - 0,25
Ass fraction, %: • Mechanical impurities, not more than• Water, not more than• Sulfur in base oil, not more than• Calcium, not less than
AbsenceTraces
0,7-
0,01Absence
0,70,08
GENERAL PURPOSE OILS
Agrinol MS-20
Agrinol МS-20pAgrinol МS-20ps
Agrinol MS-20gk
TS U 23.2-30802090-013-2003Industrial oils I-5А, I-8А, I-12А, I-12А1 are refined distillate and residual
oils or it’s mixtures without any additives. These oils are used for machines and mechanisms of industrial equipment that does not impose specific requirements to anti-oxidation and anti-corrosion properties of oils. These products can also be used as hydraulic liquids.
Index name I-5А I-8А I-12А I-12А1
Kinematic viscosity at 40°С, mm2/s 6–8 9–11 13–17 13–17
Acid number, mg КОН/g, not more than 0,02 0,02 0,02 0,02
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
140-18
150-15
170-15
165-30
Mass fraction, %, not more than: • mechanical impurities• water• solvents in refined oils
AbsenceTraces
Absence
Mass fraction of sulfur, %, not more than 1,0 1,0 1,0 1,0
Ash content, %, not more than 0,005
Stability against oxidation: • increase of acid number, mg КОН/g, not more than • increment of resins, %, not more than
0,201,5
0,201,5
0,201,5
0,201,5
Color, CNT units, not more than 1,0 1,5 1,5 2,5
GENERAL PURPOSE OILS
Industrial petroleum oils
GOST 20799 – 88
-
56 57
www.agrinol.com.uawww.agrinol.com.ua
Industrial oils I-20А, I-30А, I-40А, I-50А are refined distillate and residual oils or it’s mixtures without any additives. These oils are used for machines and mechanisms of industrial equipment that does not impose specific requirements to anti-oxidation and anti-corrosion properties of oils. These products can also be used as hydraulic liquids.
Index name I-20А I-30А I-40А I-50А
Kinematic viscosity at 40°С, mm2/s 29–35 41–51 61–75 90–110
Acid number, mg КОН/g, not more than 0,03 0,05 0,05 0,05
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
200-15
210-15
220-15
225-15
Mass fraction, %, not more than: • mechanical impurities• water• solvents in refined oils
AbsenceTraces
Absence
Mass fraction of sulfur, %, not more than 1,0 1,0 1,1 1,1
Ash content, %, not more than 0,005
Stability against oxidation: • increase of acid number, mg КОН/g, not more than • increment of resins, %, not more than
0,302,0
0,403,0
0,403,0
0,403,0
Color, CNT units, not more than 2,0 2,5 3,0 4,5
GENERAL PURPOSE OILS
Industrial petroleum oils
GOST 20799 – 88Agrinol MZ-8 is used for heat-treatment of components of medium - carbon and cemented steels.Agrinol MZ-16 is used for heat-treatment steel parts in the temperature range: 30 … 70°C.Agrinol MZ-38 is used for heat-treatment steel parts in the temperature range: 50 … 100°C.Agrinol MZ-90 is used for heat-treatment steel parts in the temperature range: 70 … 140°C.Agrinol MZ-120 is used for heat-treatment steel parts in the temperature range: 120 … 180°C.
Index name Agrinol MZ-8Agrinol MZ-16
Agrinol MZ-38
Agrinol MZ-90
Agrinol MZ-120
Kinematic viscosity at 40°С, mm2/s 8–11 20–24 25–36 120–160 190–250
Acid number, mg КОН/g, not more than 0,5 0,5 0,5 0,5 0,5
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
140-25
160-15
180-15
210-12
235-12
Mass fraction, %, not more than: • mechanical impurities• water
AbsenceAbsence
Coking ability, %, not more than 0,2 0,3 0,4 0,4 0,4
Oxidation stability, not more than: • changes in viscosity, %• acid number, mg КОН/g
50,1
100,15
100,2
100,2
100,2
HEAT-TREATMENT OILS
Agrinol MZTS U 23.2-30802090-023-2004
-
58 59
www.agrinol.com.uawww.agrinol.com.ua
Heat-treatment oils Agrinol MZM possesses elevated antioxidant properties and are used for hardening of metals.
Index name Agrinol MZM-16Agrinol MZM-26
Agrinol MZM-120
Kinematic viscosity at 50°С, mm2/s 14,5-19,0 23,5-27,0 109,0-120,0
Viscosity index, not less than – 85 85
Acid number, mg КОН/g, not more than 0,01 0,01 0,02
Saponification number, mg КОН/g, not more than 0,05
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
170-12
200-12
240-12
Coking ability, %, not more than 0,15 0,2 0,5
Color, CNT units, not more than 3 5 7
Mass fraction, %, not more than: • mechanical impurities• water
0,01Traces
0,01Traces
0,01Traces
Oxidation tests:• weight loss, %, not more than• Kinematic viscosity at 50°С, mm2/s, not more than• coking, %, not more than• Downward change the flash point in closed crucible, °С,not more than
1022,50,30
1030,50,40
3134,00,95
0
HEAT-TREATMENT OILS
Agrinol MZMTS U 23.2-30802090-074-2008 Agrinol Termol heat-treatment oil is designed for quench cooling of steel
products made of low-alloy and alloy steels, in order to obtain high hardness val-ues, of the required structure and clean surface.
Index name Agrinol Termol
Kinematic viscosity at 40°С, mm2/s 25 - 36
Acid number, mg КОН/g, not more than 0,5
Flash point in open crucible, °С, not less than 180
Coking ability, %, not more than 0,25
Color, CNT units, not more than 7
Mass fraction, %, not more than: • mechanical impurities• water
0,026Traces
Oxidation resistance (oxidized oil properties):• weight loss, %, not more than• kinematic viscosity at 40°С, mm2/s, within• coking, %, not more than• flash point in open crucible, °С, not less than
724 - 40
0,45180
HEAT-TREATMENT OILS
Agrinol TermolTS U 23.2-30802090-082-2008
-
60 61
www.agrinol.com.uawww.agrinol.com.ua
Vacuum petroleum oils of Agrinol VM series are used as the working fluid for mechanical vacuum pumps.
Agrinol VМ-1 oil is used as a working liquid in high-vacuum steam-jet pumps of BN-3 series, which work at the residual pressure from 1•10 – 3 to 1•10 – 6 mm of mercury.
Agrinol VМ-3 is used as a working liquid in high-production oil-vapor booster pumps which work at the residual pressure from 1•10 – 2 to 1•10 – 4 mm of mercury.
Agrinol VМ-4 oil is used as a working liquid in mechanical vacuum pumps with oil seal.
Index name Agrinol VM-1 Agrinol VM-3 Agrinol VM-4
Kinematic viscosity, mm2/s:• at 20°С• at 100°С
60–70–
8–11–
48–578–11
Acid number, mg КОН/g, not more than 0,2Temperature, °С:• Flash point in open crucible, not less than• Flash point in closed crucible, not less than• Pour point, not more than
230–
-12
150–
-12
235205-15
CNT color, not more than 0,5 3,5 7,0
Fractional composition of oil, °С:• the temperature of the beginning of the distillation, not less than• 90% of the oil distilled at a temperature not higher than • the end of the boil, not more than
–––
95175
–
370–
515
Vapor pressure at 20°С, Pa, not more than 5,3·10-6 1,33·10-2 5,3·10-3
Density at 20°С, kg/m2, not more than 900 890 908
VACUUM OILS
Agrinol VMTS U 23.2-30802090-031:2006
Agrinol VM-5 oil is used as used as the working fluid in a high-vacuum steam jet pumps, which operate at a residual pressure of 1 • 10-3 • 10-7 to 1 mm Hg. of Art.
Agrinol VM-6 used as a lubricating material and seal for piston backing pumps, working at a residual pressure of 1 • 10-3 mm Hg. of Art.
Agrinol VM-11 oil is used as the working fluid in a high-performance steam booster, auxiliary and steam-jet and special fore-vacuum pumps.
Index name Agrinol VM-5 Agrinol VM-6 Agrinol VM-11Kinematic viscosity, mm2/s:
• at 20°С, not more than• at 50°С, not more than• at 100°С, not more than
-60–74
–
220408
-12,5–15,8
-
Acid number, mg КОН/g, not more than 0,2
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
230-12
216-10
170-12
CNT color, not more than 0,5 4,5 0,5
Fractional composition of oil, °С:• the temperature of the beginning of the distillation, not less than• 90% of the oil distilled at a temperature not higher than
–
–
125
220
80
175
Vapor pressure at 20°С, Pa Not more than 2,7·10-5 Not more than 4,0·10-4 6,7·10-3 - 1,3·10-4
Density at 20°С, kg/m, not more than 900 890 890
VACUUM OILS
Agrinol VMTS U 23.2-30802090-031:2006
-
62 63
www.agrinol.com.uawww.agrinol.com.ua
Flushing oils are designed for irrigation of automotive engine lubrication sys-tems without disassembly (while replacement of oil).
Flushing liquid Agrinol MPT-2M is used for flushing of lubrication systems of diesel engines (diesel, marine, automotive, road and construction equipment, etc.), as well as gasoline engine cars and trucks without disassembly while fluid replacement.
Index name Agrinol MP Agrinol MP plus Agrinol MPT-2mKinematic viscosity at 50°С, mm2/s 9–12 12-23 18-22
Temperature, °С:• Flash point in open crucible, not less than• Pour point, not more than
140-40
140-15 160-15
Mass fraction, %, not more than:• mechanical impurities• water• sulphated ash
0,01Traces
1,2
0,01Traces