oh - me and my sister · 50 1/2 x 50 1/2 inches me and my sister designs fabric requirements 2...

Tablecloth 50 1/2 x 50 1/2 inches Me and My Sister Designs Fabric Requirements 2 Oh-Cherry-Oh Panels 22090-11 1 yard turquoise lattice print for tablecloth center #22091-13 ⅓ yard red rickrack print for border #22073-31 ½ yard red rickrack print for binding #22073-31 3 ½ yards red lattice print for backing #22091-11 Yardage is based on 40 - inch wide fabric Cutting Instructions From turquoise print for tablecloth center: • Cut 1, 27 ½ x 27 ½ - inch square From red rickrack print for border: • Cut 4, 2 x 40 - inch strips From these strips cut 2, 2 x 27 ½ - inch rectangles 2, 2 x 30 ½ - inch rectangles From Oh-Cherry-Oh panels: • Trim 16 blocks to measure 10 ½ x 10 ½ - inches square From red rickrack print for binding: • Cut 6, 2 ¼ x 40 - inch strips Quilt Assembly Use ¼ - inch seam allowance throughout, a small stitch length, and press seams open. Borders • Arrange and sew a 2 x 27 ½ - inch red rickrack rectangle to each side of the tablecloth center and a 2 x 30 ½ - inch red rickrack rectangle to the top and bottom of the tablecloth center. Tablecloth should now measure 30 ½ x 30 ½ - inches square. • Arrange and sew 3, 10 ½ x 10 ½ - inch panel blocks end to end for side borders. Make two and attach one to each side of the tablecloth center. Make 2 • Arrange and sew 5, 10 ½ x 10 ½ - inch panel blocks end to end for top and bottom borders. Make two and attach to the top and bottom of the tablecloth center. Make 2 ©Me and My Sister Designs 2008 fabrics for moda Oh-cherry-Oh

Upload: others

Post on 20-Jul-2020

3 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Tablecloth 50 1/2 x 50 1/2 inches

Me and My Sister Designs

Fabric Requirements

2 Oh-Cherry-Oh Panels 22090-111 yard turquoise lattice print for tablecloth center #22091-13 ⅓ yard red rickrack print for border #22073-31½ yard red rickrack print for binding #22073-313 ½ yards red lattice print for backing #22091-11Yardage is based on 40 - inch wide fabric

Cutting Instructions

From turquoise print for tablecloth center:• Cut 1, 27 ½ x 27 ½ - inch square From red rickrack print for border:• Cut 4, 2 x 40 - inch strips From these strips cut 2, 2 x 27 ½ - inch rectangles 2, 2 x 30 ½ - inch rectangles

From Oh-Cherry-Oh panels:• Trim 16 blocks to measure 10 ½ x 10 ½ - inches square

From red rickrack print for binding:• Cut 6, 2 ¼ x 40 - inch strips

Quilt Assembly

Use ¼ - inch seam allowance throughout, a small stitch length, and press seams open.

Borders• Arrange and sew a 2 x 27 ½ - inch red rickrack rectangle to each side of the tablecloth center and a 2 x 30 ½ - inch red rickrack rectangle to the top and bottom of the tablecloth center. Tablecloth should now measure 30 ½ x 30 ½ - inches square.

• Arrange and sew 3, 10 ½ x 10 ½ - inch panel blocks end to end for side borders. Make two and attach one to each side of the tablecloth center.

Make 2• Arrange and sew 5, 10 ½ x 10 ½ - inch panel blocks end to end for top and bottom borders. Make two and attach to the top and bottom of the tablecloth center.

Make 2

©Me and My Sister Designs 2008fabrics for moda

Oh-cherry-Oh